B G
MDX-9
MINIDISC RECORDER
LECTEUR ENREGISTREUR DE MINIDISC
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
0
1 SEARCH
¡
3PLAY/
POW ER
7STOP
8PAUSE
REC LEVEL
REC
DISPLAY
TITLE
CHARA.
DELETE
EDIT
SET
INPUT
CANCEL
ENTER
0
10
+
4
¢
OWNER’S MANUAL
OWNER’S MANUAL
MODE D’EMPLOI
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BEDIENUNGSANLEITUNG
BRUKSANVISNING
BRUKSANVISNING
MANUALE DELL’UTENTE
MANUALE DELL’UTENTE
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
GEBRUIKSAANWIJZING
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for selecting this YAMAHA mini disc recorder.
FEATURES
CONTENTS
¶
A sampling rate converter that lets you make
digital recordings from 32 kHz (DAT, etc.) , 44.1
kHz (CD, DAT, MD, etc.) and 48 kHz (DAT, etc.)
program sources.
PART DESCRIPTIONS........................................................ 4
FRONT PANEL ..................................................................... 5
REMOTE CONTROL............................................................. 6
CONNECTIONS ................................................................... 7
ANALOG CONNECTIONS ................................................... 7
DIGITAL CONNECTIONS .................................................... 7
PLAYBACK .......................................................................... 8
Skipping Tracks ................................................................ 8
Searching .......................................................................... 9
Switching the Display ....................................................... 9
RANDOM PLAY .................................................................. 10
REPEAT PLAY .................................................................... 10
Single Track Repeat ....................................................... 10
Full Disc Repeat.............................................................. 10
Part (A-B) Repeat............................................................ 11
PROGRAM PLAY................................................................ 11
RECORDING...................................................................... 13
Recording Level.............................................................. 14
Auto Marking ................................................................... 14
TIME RESCUE RECORDING ............................................. 15
SYNCHRO RECORDING.................................................... 15
MONAURAL RECORDING................................................. 16
MONITOR OUT................................................................... 16
EDITING ............................................................................. 17
MOVE .................................................................................. 17
ERASE................................................................................. 18
Disc Erase ....................................................................... 18
Track Erase ..................................................................... 18
Part Erase........................................................................ 19
COMBINE ........................................................................... 19
DIVIDE ................................................................................ 20
TITLING .............................................................................. 21
TIMER OPERATIONS ....................................................... 22
Timer recording .............................................................. 22
Timer playback ............................................................... 22
MD SYSTEM LIMITATIONS.............................................. 23
COPY PROTECTION (SCMS) .......................................... 24
NOTES REGARDING THE REMOTE CONTROL............ 24
Remote control operation range .................................... 24
Battery installation .......................................................... 24
TROUBLESHOOTING ....................................................... 25
DISPLAY MESSAGES ...................................................... 26
SPECIFICATIONS ............................................................. 27
¶
¶
Editing features (MOVE, ERASE, DIVIDE,
COMBINE, TITLE, and UNDO) that let you take
full advantage of the MD recording system.
Multiple digital INPUT terminals (2 optical inputs
and 1 coaxial input) let you connect up to three
different digital program sources.
¶
¶
The digital optical OUTPUT terminal lets you
output digital audio from an MD.*
In addition to the standard disc and track repeat
modes, this unit also has a part (A-B) repeat
mode that lets you repeat a specific part of a
track.
¶
¶
Synchro Record lets you make synchronized
recordings from any type of source component.
Time Rescue Record monitors the sound being
input and allows you to recover sound input from
a point approximately four seconds before you
start the recording operation. (So you will not
miss the beginning of a song when recording
directly from the radio, etc.)
¶
¶
The Monaural Record mode lets you record up to
148 minutes of audio onto one MD.
Timer playback and recording modes that let you
start playback or recording at a preset time using
an optional audio timer.
* This is not possible if MD is a direct copy of another digital
signal (see page 24 for details regarding SCMS copy
protection).
US and foreign patents licensed from Dolby Laboratories
Licensing Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PART DESCRIPTIONS
Front Panel
~
Ÿ
!
⁄
@
¤
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
0
1 SEARCH
¡
3PLAY/
POW ER
7STOP
8PAUSE
REC LEVEL
REC
DISPLAY
TITLE
CHARA.
DELETE
EDIT
SET
INPUT
CANCEL
ENTER
0
10
—
+
4
¢
#
‹
$
›
%
fi
^
fl
&
‡
*
°
(
Remote Control
%
fi
!
?
DISPLAY SCROLL
~
Ÿ
!
S/
F
A—B REPEAT
&
—
(
)
RNDM
PROG
A B C
1
D E F
2
G H I
3
J
K L
4
M
N
5
O
P
Q R
6
S
T U
7
V W
8
X
Y Z
/
9
0
⁄
SPACE
+1 0
^
fl
&
@
¤
#
TITLE
CHAR. NUMBER DELETE
SET
‡
*
°
(
SEARCH
M-MARK MONO/ ST INPUT
REC
1
¡
SKIP
4
¢
TIME
SYNC
‹
PLAY
PAUSE
STOP
REC
£
8
7
¶
CD—P
$
›
·
)
‚
s
M DX
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL
See the pages in parenthesis for details regarding operation.
~ POWER (8)
fi EDIT (17)
Press repeatedly to accesses the different edit modes.
Press to turn the unit on or off.
Ÿ TIMER (22)
^ SET/ENTER (17, 21)
Use to set the unit to play or record when activated by
Press to confirm the current operation or select an edit
an external timer.
mode (etc.).
! Disc insertion slot
fl Jog dial [– / +] [$ ›] (8, 21)
Insert the disc into this slot.
Use to skip to the beginning of the previous or next
tracks.
⁄ Eject )
Use to select characters when inputting a disc (track)
title.
Press to remove the disc.
If the TOC* data has not yet been written, it is written
automatically before the disc is ejected.
& INPUT (13)
Press repeatedly to select the input jacks you want to
record from: ANALOG or DIGITAL (OPTICAL 1,
OPTICAL 2, or COAXIAL).
@ SEARCH ! ⁄ (9, 21)
Press and hold to search quickly during play or pause.
Use to move the cursor when inputting a disc (track)
title.
‡ REC LEVEL (14)
Use to adjust the recording level when recording from
the analog inputs.
¤ Display panel (9)
Displays various information.
* REC (14)
# Remote control sensor (24)
Press during stop or pause to activate the record
pause mode.
Receives the signals emitted from the remote control.
Press while recording to manually add a track division.
‹ DISPLAY (9)
Press repeatedly to switch between the title and time
displays.
° & STOP (8, 13, 17, 21)
Press to stop recording or playback.
Press to cancel an edit or title input operation.
$ TITLE (21)
Press to activate or deactivate the title mode.
( ‹ PLAY/* PAUSE (8, 13)
Press during stop (or pause) to start playback. Press
while playing to pause.
› CHARA. (21)
Press repeatedly to select different types of characters
Press during record pause to start recording. Press
while recording to pause.
when titling a disc (track).
% DELETE/CANCEL (17, 21)
Press to cancel an edit function or to delete the
selected character when titling a disc (track).
* TOC (Table of Contents): This is the non-audio data
contained on all mini discs (track numbers, playback
time, title data, etc.).
UTOC (User’s Table of Contents): This is non-audio data
that you can edit (like track numbers, playback time, and
title data).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
See the pages in parenthesis for details regarding operation.
~ REPEAT (10~11)
fi SCROLL (9)
Press to scroll the disc (track) title across the display.
Press while scrolling to pause the scroll.
S/F (!)
Press to select single track (S) or full disc (F) repeat.
Press to select “!” when creating a disc (track) title.
^ NUMBER (21)
Press before pressing a number button to input a
number during title mode.
A-B (?)
Press to specify the A and B points for A-B repeat.
Press to select “?” when creating a disc (track) title.
fl DELETE (21)
Press to delete the selected character when titling a
disc (track).
Ÿ PROG (–) (11)
Press to activate or deactivate the program play mode.
Press to select “–” when creating a disc (track) title.
& SET (21)
Press to confirm selected character when titling a disc
(track).
! RNDM (&) (10)
Press to activate or deactivate the random play mode.
‡ M-MARK (14)
Press to select “&” when creating a disc (track) title.
Press to select automatic or manual marking of tracks
during recording.
⁄ Numbers/Characters (8, 21)
Use to specify a track.
* INPUT (13)
Press repeatedly to select a character when creating a
disc (track) title.
Press repeatedly to select the input jacks you want to
record from: ANALOG or DIGITAL (OPTICAL 1,
OPTICAL 2, or COAXIAL).
@ CHAR. (21)
Press repeatedly to select uppercase or lowercase
° MONO/ST (16)
letters during title mode.
Press during stop or pause to select either monaural or
stereo recording.
¤ TITLE (21)
Press to activate or deactivate the title mode.
( Special Record buttons
# SEARCH ! ⁄ (9, 21)
TIME (15)
Press and hold to search quickly during play or pause.
Use to move the cursor when inputting a disc (track)
title.
Press during record pause mode to activate Time
Rescue Recording and set the unit to the record pause
mode.
‹ SKIP $ › (8, 21)
SYNC (15)
Press to skip to the beginning of the previous or next
tracks during play, pause or stop.
Use to select characters when inputting a disc (track)
title.
Press during stop to activate Synchronized Recording
and set the unit to the record pause mode.
· CD-P (15)
Press to start playback from a YAMAHA CD player.
$ ‹ PLAY (8, 14)
Press during stop (or pause) to start playback.
Press during record pause to start recording.
) ? REC (14)
Press during stop or pause to activate the record
pause mode.
› * PAUSE (8, 14)
Press while recording to manually add a track mark.
Press to pause playback or recording.
‚ & STOP (8, 14, 17, 21)
% DISPLAY (9)
Press to stop recording or playback.
Press to cancel an edit or title input operation.
Press repeatedly to switch between the title and time
displays.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Do not plug in this unit (or other components) until all other connections are complete.
• Connections should be made to the correct input/output terminals on the other component.
• Also refer to the owner’s manual supplied with the component you are connecting.
• If the placement of this unit causes noise in other equipment, such as a tuner, move them farther apart.
ANALOG CONNECTIONS
Connecting cords (included)
To AC outlet
3
PLAY
4
REC
ANALOG
LINE IN LINE OUT
DIGITAL IN
DIGITAL OUT
OPTICAL
R
L
4
3
COAXIAL
OPTICAL
1
2
L
R
REC
PLAY
Amplifier/Receiver
Notes for analog connections
• The white plug on the connecting cables corresponds to the L (left) channel and the red plug corresponds to the R (right) channel. Be
sure to connect L (left) to L and R (right) to R. Also make sure that the plugs are fully inserted and that the connection is firm.
• The LINE OUT jacks on the MD recorder should be connected to the MD PLAY jacks on your amplifier.
The LINE IN jacks on the MD recorder should be connected to the MD REC jacks on your amplifier.
• The LINE OUT terminals on this unit are numbered 3 and the LINE IN jacks are numbered 4. When connecting this unit to a YAMAHA
amplifier or receiver whose terminals are numbered 1, 2, 3, 4 ... (etc.), connect this unit’s LINE OUT terminals to the input terminals
numbered 3 and connect this unit’s LINE IN terminals to the output terminals numbered 4 on the rear panel of the amplifier or receiver.
DIGITAL CONNECTIONS
Optical fiber cable (not included)
To AC outlet
DIGITAL OUT
OPTICAL
ANALOG
LINE IN LINE OUT
DIGITAL IN
DIGITAL OUT
OPTICAL
4
3
COAXIAL
OPTICAL
1
2
L
R
CD player (etc.) with
optical OUT
Amplifier/Receiver
(or MD/DAT recorder)
with optical IN/OUT
REC
PLAY
DIGITAL OUT
COAXIAL
Coaxial cable (not included)
DIGITAL IN
OPTICAL
DIGITAL OUT
OPTICAL
Optical fiber cable (not included)
Satellite tuner (etc.)
with coaxial OUT
Optical fiber cable (not included)
Notes for digital connections
• The DIGITAL IN terminals can be connected to any component with an optical or coaxial output so you can make direct digital
recordings.
• The DIGITAL OUT terminal can be connected to a any component with an optical input so you can output digital audio from an MD.
• Before making OPTICAL connections, remove the terminal cover(s).
• In order to protect the terminals from dust, be sure to attach the terminal covers when the optical terminals are not being used.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Preparations
To stop
• Be sure to set the TIMER switch to OFF, then press
POWER to turn this unit on.
• Set your amplifier or receiver to MD.
Press & STOP.
To pause
Press # PLAY/* PAUSE (or * PAUSE on the remote).
Press again to resume playback (or press # PLAY on the
remote).
2
1
)
SEARCH ! ⁄
To eject the MD
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
Press ).
)
!
⁄
SEARCH
#
*
PLAY/
PAUSE
POW ER
&
STOP
REC LEVEL
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
Note
ENTER
0
10
–
+
$
›
The MONO indicator lights when playing monaural MDs.
jog dial
& STOP
Skipping Tracks
To skip to the next track
Turn the jog dial to the right (or press SKIP › on the
remote).
!
?
DISPLAY SCROLL
S/
F
A–B
REPEAT
(
&
–
)
RNDM
PROG
A
P
B
1
C
R
D
S
E
F
G
H
I
J
K
4
L
M
N
5
O
2
3
Numbers
To skip to a previous track
Q
6
T
7
U
V
W
8
X
Y
Z
/
9
0
SPACE
+1 0
Turn the jog dial to the left (or press SKIP $ on the
remote).
Turn one click to skip to the beginning of the current track.
Turn an additional click to skip to the beginning of each
previous track.
TITLE
CHAR. NUMBER DELETE
SET
SEARCH
! ⁄
SEARCH
M-MARK MONO/ ST INPUT
REC
!
⁄
SKIP
$
›
TIME
SYNC
SKIP
$ ›
PLAY
PAUSE
STOP
REC
‹
*
&
?
CD-P
To skip to a specific track number
s
M DX
2
Press the number buttons on the remote corresponding to
& STOP
the track you desire.
Example:
* PAUSE
To select track 3, press 3.
To select track 13, press +10, then press 3.
To select track 23, press +10 twice, then press 3.
To skip to the last track on the disc
1 Insert an MD.
Turn the jog dial to the left when the display is showing the
total tracks and total playing time.
Label facing up
NATURAL SOUND MINIDISC RECORDER MDX-9
0
s
Arrow pointed toward
disc insertion slot
2 Press # PLAY/* PAUSE (or # PLAY on the
remote) to start playback.
3 Adjust the volume using the volume control on
your amplifier or receiver.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Time remaining on the MD (only for recordable MDs)
Searching
REMAIN indicator
Time remaining on the MD
To search forward during play or pause
DISC TRACK
TOTAL
REMAIN
Press and hold SEARCH ⁄.
To search in reverse during play or pause
Press and hold SEARCH !.
Total tracks
Notes
3 Disc title
• Sound can be heard when searching in play mode to help you
locate the desired position within the track. No sound is heard
when searching in pause mode, but the search is conducted
at a higher speed.
DISC TRACK
TOTAL
REMAIN
• When searching in play mode, playback stops when you
reach the end of the last track.
• Search may not function correctly when there are several
consecutive tracks consisting of only a few seconds apiece.
During playback
Press DISPLAY to repeatedly to display the following
Switching the Display
information.
1 Current track number and elapsed time
When you insert an MD the disc title is displayed
automatically (“No Title” appears if there is no disc title).
Pressing DISPLAY during stop or playback lets you
display other information, such as the remaining time and
track titles.
Track number
Elapsed time
DISC TRACK
TOTAL
REMAIN
#
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
2 Time remaining on the current track
)
!
⁄
SEARCH
REMAIN indicator
#
*
PLAY/
PAUSE
POW ER
&
STOP
REC LEVEL
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
ENTER
0
10
—
+
DISC TRACK
TOTAL
REMAIN
$
›
#
DISPLAY
3 Track title
If the track has not been given a name, “No Title” is
displayed and the display switches back to the elapsed time
(1).
!
?
DISPLAY SCROLL
S/
F
A–B
REPEAT
(
SCROLL
DISPLAY
&
–
)
#
RNDM
PROG
DISC TRACK
TOTAL
REMAIN
A
P
B
1
C
R
D
S
E
F
G
H
I
J
K
4
L
M
N
5
O
2
3
Q
6
T
7
U
V
W
8
X
Y
Z
/
9
0
#
SPACE
+1 0
To view the entire disc (track) title
During stop
If the disc (track) title is too long to fit in the display, press
SCROLL. Press SCROLL while the title is scrolling to stop
the scrolling. Press again to continue scrolling through the
title.
Press DISPLAY to repeatedly to display the following
information.
1 Number of tracks and total playing time
Total tracks
Total playing time
DISC TRACK
TOTAL
REMAIN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RANDOM PLAY
REPEAT PLAY
You can have the unit play all the tracks on a disc in a
random sequence
You can have the unit play a single track, the full disc, or
just part of a track repeatedly.
!
?
DISPLAY SCROLL
S/
F
A–B
REPEAT
(
!
?
DISPLAY SCROLL
S/
F
A–B
REPEAT
(
S/F – REPEAT
A-B – REPEAT
&
–
)
#
RNDM
PROG
&
–
)
#
RNDM
RNDM
PROG
A
P
B
1
C
R
D
S
E
F
G
H
I
J
K
4
L
M
N
5
O
2
3
A
P
B
1
C
R
D
S
E
F
G
H
I
J
K
4
L
M
N
5
O
2
3
Q
6
T
7
U
V
W
8
X
Y
Z
/
9
0
Q
6
T
7
U
V
W
8
X
Y
Z
/
9
0
SPACE
+1 0
SPACE
+1 0
To start random playback
Single Track Repeat
Press RNDM.
The RANDOM indicator lights up and “RandomSearch”
appears in the display while the unit selects a track.
Playback starts automatically.
1 Select the track you want to repeat.
2 Press S/F – REPEAT repeatedly to light the
REPEAT S indicators.
To cancel
REPEAT
A-BSF
Press RNDM again to turn off the RANDOM indicator.
To cancel
Notes
Press S/F – REPEAT repeatedly to turn off the REPEAT S
indicators.
• Pressing SKIP › during random play skips to another track
at random. Pressing SKIP $ returns to the beginning of the
current track (you cannot return to previously played tracks).
• If you turn the unit off during random playback, it will be ready
for random play the next time you turn the power back on.
Note
Single track repeat is not available during random or program
playback.
Full Disc Repeat
Press S/F – REPEAT repeatedly to light the REPEAT
F indicators.
REPEAT
A-BSF
To cancel
Press S/F – REPEAT repeatedly to turn off the REPEAT F
indicators.
Notes
• In program play mode, the entire program is played
repeatedly.
• In random play mode, the unit reshuffles the tracks and plays
them again after each track plays once.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Part (A-B) Repeat
PROGRAM PLAY
This function lets you repeat a specific part of a track. It’s a
convenient way to study a language, or learn the lyrics to
your favorite song (etc.).
This function lets you enjoy listening to your favorite tracks
in any order you desire.
1 Press A-B – REPEAT during playback to specify
the beginning (A point) of the part you want to
repeat.
DISPLAY
!
?
DISPLAY SCROLL
The REPEAT A indicators light up.
S/
F
A—B REPEAT
&
—
(
)
#
2
RNDM
PROG
A
P
B
1
C
R
D
S
E
F
G
H
I
J
K
4
L
M
N
5
O
2
3
REPEAT
A-BSF
Q
6
T
7
U
V
W
8
X
Y
Z
/
3
9
0
SPACE
+1 0
2 Press A-B – REPEAT again to specify the end (B
point) of the part you want to repeat.
The REPEAT A-B indicators light up and the part you
specified starts to repeat.
DELETE
SET
TITLE
CHAR. NUMBER DELETE
SET
SEARCH
! ⁄
SEARCH
M-MARK MONO/ ST INPUT
REC
!
⁄
SKIP
$
›
SKIP
TIME
SYNC
PLAY
PAUSE
STOP
REC
$ ›
‹
*
&
?
CD-P
1
REPEAT
A-BSF
4
s
M DX
To cancel
Press & STOP or A-B – REPEAT.
1 Press & STOP to stop playback.
2 Press PROG to light up the PROGRAM indicator.
3 Program the desired track by pressing the
corresponding numeric buttons.
Example:
To select track 3, press 3.
To select track 13, press +10, then press 3.
To select track 23, press +10 twice, then press 3.
The following display appears momentarily to
show the step information:
Step number
Track number
PROGRAM
The display then switches to the program status:
Total steps
Total playing time
TOTAL
PROGRAM
Repeat this operation to program of up to 30 steps.
4 Press # PLAY to start program playback.
Continued on next page
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the programmed data
1
2
Stop or pause program playback.
Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
To delete a specific step
1
2
Stop program playback.
Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
Press DELETE (or DELETE/CANCEL on the front
panel) to delete the step. The higher steps are
renumbered automatically.
3
To change a step
1
2
Stop program playback.
Press SKIP $ or › to skip through the step
information (or use the jog dial on the front panel).
Use the numeric buttons to program a new track
number for that step. The original track is cleared from
memory and the new track is programmed.
3
To cancel
Press PROG To turn off the “PROGRAM” indicator, eject
the disc, or set POWER to off.
Notes
• If the total time exceeds 255 minutes “255mOver” is displayed
instead of the total time.
• SKIP $ or › can be used during playback to skip
between programed tracks.
• SEARCH ⁄ can be used during playback to search through
all tracks in the current program.
• SEARCH ! can be used during playback return to the
beginning of the current track.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
This unit allows you to make recordings from a wide variety
of program sources (both analog and digital).
1 Insert an MD.
Label facing up
When recording an analog source (such as an LP or
cassette) this unit converts the analog signals to 44.1 kHz
digital signal before recording them onto the MD.
When recording a digital source, this unit converts the
digital signals to 44.1 kHz for recording onto the MD.
However, If you are recording a 44.1 kHz source signal
(such as a CD) there is no conversion. This unit can record
32, 44.1 and 48 kHz digital signals.
NATURAL SOUND MINIDISC RECORDER MDX-9
0
s
Arrow pointed toward
disc insertion slot
2 Press INPUT repeatedly to select the input
connected to the sound source you want to
record.
Preparations
• Be sure to set the TIMER switch to OFF, then press
POWER to turn this unit on.
• Set your amplifier or receiver to the program source to be
recorded.
For
Select
LINE IN 4
ANALOG
DIGITAL IN COAXIAL
DIGITAL IN OPTICAL 1
DIGITAL IN OPTICAL 2
DIGITAL COAX.
DIGITAL OPT. 1
DIGITAL OPT. 2
1
)
REC LEVEL & STOP
Input indicator
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
ANALOG DISC TRACK
REC
PLAY
DIGITAL
TOTAL
)
OPT. 1
2
REMAIN
COAX.
!
⁄
SEARCH
#
*
PLAY/
PAUSE
3 2 4 4 .1 4 8
RANDOM
POW ER
&
STOP
REC LEVEL
kHz
PROGRAM
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
REPEAT
A-BSF
ENTER
0
10
—
+
$
›
(Source) sampling frequency indicators*
* Appears when digital signal is input.
2
4
6
3 Locate the point where you want to start
recording.
• When recording from a blank MD
Skip this step.
• To start recording from the end of a previous recording.
Press & STOP to set this unit to stop mode.
• To record over a previous recording.
M-MARK
TITLE
CHAR. NUMBER DELETE
SET
SEARCH
M-MARK MONO/ ST INPUT
REC
!
⁄
2
SKIP
$
›
TIME
SYNC
PLAY
PAUSE
STOP
REC
‹
*
&
?
CD-P
6
Turn the jog dial (or press SKIP $ or › on the remote)
to select a track (recording starts from the beginning of the
deleted track), or press * PAUSE during playback to pause
at the point where you want to start recording.
4
& STOP
s
M DX
Continued on next page
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press REC to set the this unit to record pause
Recording Level
mode.
The REC * indicators light up.
“REC Standby” and the amount of time available for recording
flash alternately in the display.
To set the recording level, first set this unit to the record
pause mode (press REC). Then play the loudest passage
of the source to be recorded and watch the meter
readings. Adjust the REC LEVEL control so that the
highest peak causes the 0 dB level indicators to flicker.
The OVER indicators should not light.
If you selected a track number or paused playback (in step
3) to record over a previous recording
“OverWriteOK?” appears in the display.
To confirm, press ENTER. This operation will erase the
selected track number (or point) and all subsequent material.
To cancel, press CANCEL (or & STOP).
L
–
–
–
–
–
–
–
1
dB 00 6 0
3 0
1 0
6
4
2
0
OVER
R
If you selected ANALOG in step 2, adjust the recording
level as described in “Recording Level”.
Should not light
Note
Note
When recording from a digital source that has a digital output
(volume) control, set the output level (volume) to “MAX”.
Recording may not be possible at low output levels (when the
digital volume is turned down).
Although some sources can be recorded with lower peak levels,
setting the peak levels too low may degrade the quality of the
recording.
Auto Marking
5 Start playing the program source to be recorded.
6 Press # PLAY/* PAUSE (or # PLAY on the
When making a recording, you can choose either
automatic or manual marking. This feature operates
somewhat differently for analog and digital signals. See
below for details.
remote) to start recording.
The TOC indicator lights up.
When the TOC indicator is lit, this means that the TOC
information has not yet been written to the disc. After
recording, eject the disc, or turn this unit’s power off to write
the TOC information and finalize the recording.
Press M-MARK on the remote repeatedly to select
automatic (MANUAL indicator out) or manual
(MANUAL indicator lit) marking.
To stop
Press & STOP.
MANUAL
To pause
When recording analog signals
Press # PLAY/* PAUSE (* PAUSE on the remote).
Press again to resume recording.
Auto : Track numbers are written in synchronization with
the input level of the signal being recorded. In other words,
if the source signal falls below a certain level for more than
1.5 seconds a track number is written automatically the
next time the source signal rises above that level.
Manual : One track number is written automatically when
you start recording, but none are written during recording.
To mark a track number, press REC at the desired position
while recording.
To eject the MD
Press ).
TOC writing may be impossible (or track number
marking may not perform as expected) when recording
a damaged CD or a broadcast source under
interference.
Note
When using manual marking, the marks must be set at least 4
seconds apart.
When recording digital signals
Track numbers are written in the same positions as the
original source (CD, etc.) with either automatic or manual
marking.
To add additional track numbers, set M-MARK to MANUAL
and press REC at the desired position while recording.
Note
When recording is paused, the portion recorded up to the pause is
counted as an individual track. When recording is resumed, a new
track number is created. On the other hand, if one track is
recorded in continuous repetition, that track(s) is recorded as one
continuous track with a single track number.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME RESCUE RECORDING
SYNCHRO RECORDING
The Time Rescue (TIME) recording function allows you to
start recording four seconds before you press record.
During record pause mode, the MD recorder monitors the
input signal and continuously maintains a four second
memory “cache”. Therefore, you can record a song that
just started without cutting off the beginning. You may find
this function useful when recording live broadcasts, or
when you want to start recording from the beginning of a
song without recording lots commercials (etc.).
The synchronized recording function lets you set this unit
to start recording automatically when a sound signal is
input. When operating this unit in combination with a
remote controllable Yamaha CD player, you can use the
CD-PLAY button on this unit’s remote control to start
playback from the CD player.
TITLE
CHAR. NUMBER DELETE
SET
SEARCH
M-MARK MONO/ ST INPUT
REC
!
⁄
2
4
5
SKIP
$
›
TIME
SYNC
PLAY
PAUSE
STOP
REC
4
‹
*
&
?
CD-P
TITLE
CHAR. NUMBER DELETE
SET
SEARCH
M-MARK MONO/ ST INPUT
REC
!
⁄
s
M DX
1
3
SKIP
$
›
TIME
SYNC
PLAY
PAUSE
STOP
REC
‹
*
&
?
CD-P
s
M DX
1 Load the sound source into the source
component.
If necessary, program, or select the track you want to
start recording from before proceeding to the next
step. (Refer to the operation manual supplied with your
source component for instructions regarding its use.)
1 Press INPUT repeatedly to select the input
connected to the sound source you want to
record.
2 Press INPUT repeatedly to select the input
connected to the sound source you want to
record.
2 Locate the point where you want to start
recording.
3 Press REC to set this unit to record pause mode.
The REC * indicators light up.
3 Locate the point where you want to start
recording.
“REC Standby” and the amount of time available for recording
flash alternately in the display.
4 Press SYNC to set this unit to record pause
If you selected ANALOG in step 1, adjust the recording level
as described in “Recording Level”.
mode.
The REC * indicators light up.
“Synchro REC” and the amount of time available for recording
flash alternately in the display.
4 Press TIME to start recording when you hear the
beginning of a song you want to record.
Recording starts from the memory cache, allowing you to
record from a point approximately four seconds before you
pressed TIME.
If you selected ANALOG in step 2, adjust the recording level
as described in “Recording Level”.
5 Start playing the sound source. (Press CD-P if
recording from a Yamaha CD player.)
Note
The MD starts recording automatically when a sound signal is
input. When the sound signal stops, the unit switches back to
record pause mode and “Synchro REC” blinks in the display.
To take full advantage of the Time Rescue Recording function,
be sure to wait at least four seconds between steps 3 and 4.
6 To continue recording, repeat step 5.
When you have finished recording, press & STOP
on this unit to cancel the record pause mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MONAURAL RECORDING
MONITOR OUT
Recording in monaural (mono) allows you to record up to
148 minutes of sound on one 74 minute MD. (When
recording in stereo you can record up to 74 minutes of
sound.) This may be useful when recording an interview,
debate, or other whenever you want to record a long time
on one disc.
When a disc is not loaded, you can use the monitor out
function to monitor the sound of the input source. This
allows you to enjoy better sound from your other digital
source components, such as CD, by using this unit as a
digital to analog converter.
1
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
3
REC
PLAY
TITLE
CHAR. NUMBER DELETE
SET
)
SEARCH
M-MARK MONO/ ST INPUT
REC
!
⁄
SEARCH
!
⁄
#
*
PLAY/
PAUSE
1
4
5
POW ER
&
STOP
REC LEVEL
SKIP
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
$
›
TIME
SYNC
ENTER
PLAY
PAUSE
STOP
REC
0
10
—
+
$
›
‹
*
&
?
CD-P
s
M DX
2
3
1 Press ) to remove the disc.
2 Press INPUT repeatedly to select the input
connected to the sound source you want to
monitor.
1 Press INPUT repeatedly to select the input
connected to the sound source you want to
record.
3 Press REC.
“MONITOR OUT” appears in the display.
Sound from the selected input will be output from this unit’s
analog and digital output terminals.
2 Locate the point where you want to start
recording.
3 Press MONO/ST to light the MONO indicator.
4 Start playing the sound source selected in step 2.
The sound is output from the MD recorder’s analog and digital
output terminals.
4 Press REC.
The REC * indicators light up.
“REC Standby” and the amount of time available for recording
flash alternately in the display.
To cancel
If you selected ANALOG in step 1, adjust the recording level
as described in “Recording Level”.
Press REC again, press & STOP, or insert a disc.
5 Press # PLAY to start recording.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
One of the main advantages of the MD is its editing
MOVE
capabilities, you can remove the commercials from a radio
broadcast, reorder songs into the order you want to listen,
remove songs, combine songs, even remove part of a
song.
This function lets you change the position of any track.
First, you select the track you want to move, then you
specify the track number you want to move it to. After the
move, the tracks located between the old and new
positions are renumbered automatically. You can perform
this operation repeatedly to completely reorder the disc.
Edit functions
This unit offers the following editing operations.
(Please note that track numbers are updated automatically
when you perform a MOVE, ERASE, COMBINE or DIVIDE
operation.)
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
)
!
⁄
SEARCH
#
*
PLAY/
PAUSE
POW ER
&
STOP
¶
¶
MOVE
REC LEVEL
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
Lets you move a track to a different track number.
ENTER
0
10
—
+
$
›
ERASE
Lets you erase a track, the entire disc, or part of a
CANCEL
& STOP
2
1,3
2,4
track.
1 Turn the jog dial to select the track you want to
¶
¶
¶
COMBINE
Lets you combine two adjacent tracks.
move.
2 Press EDIT repeatedly to display “Move ?”, then
press ENTER.
DIVIDE
Lets you split a single track into two different tracks.
3 Turn the jog dial to select the track’s destination.
UNDO
Lets you undo the previous edit operation if you make
a mistake (you cannot, however, undo the undo).
Destination
Selected track
ANALOG DISC TRACK
Note
DIGITAL
TOTAL
OPT. 1
COAX.
2
REMAIN
After performing an edit operation, the TOC indicator lights up
to show that the TOC information has not yet been written to
the disc. Undo is possible only when the TOC indicator is lit.
However, if you perform a recording operation (by pressing
REC, TIME, or SYNC), undo is not possible even if the TOC
indicator is lit.
4 Press ENTER.
To cancel before moving the track
Press CANCEL (or & STOP).
To undo MOVE
1
2
Press & STOP to set this unit to stop mode.
Press EDIT repeatedly to display “Undo Move”, then
press ENTER.
“Undo OK ?” appears in the display.
3
Press ENTER again to undo.
To cancel, press CANCEL (or & STOP).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Track Erase
ERASE
The ability to erase sound without having to re-record is
another convenient function. You can erase the entire disc,
a single track, or just part of a track.
This operation lets you erase a single track. After you erase
the track, the total number of tracks decreases by one and
all tracks following that track are renumbered.
If you plan to erase two or more tracks
SEARCH
! ⁄
To avoid confusion you should always erase from higher track
numbers to lower track numbers. This prevents accidental
renumbering of tracks you plan to erase.
# PLAY/
* PAUSE
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
1 Turn the jog dial to select the track you want to
)
erase.
!
⁄
SEARCH
#
*
PLAY/
PAUSE
POW ER
&
STOP
REC LEVEL
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
ENTER
0
10
—
+
2 Press EDIT repeatedly to display “Erase ?”, then
press ENTER.
$
›
“(track number) EraseOK?” appears in the display.
CANCEL
EDIT ENTER
Jog dial & STOP
3 Press ENTER again.
The track is erased and “Complete” appears momentarily.
Disc Erase
To cancel before erasing the track
Press CANCEL (or & STOP).
This operation lets you erase all audio and title (character)
data to create a blank MD. Please note that once erased,
this data cannot be recovered.
To undo ERASE
1
2
Press & STOP to set this unit to stop mode.
Press EDIT repeatedly to display “Undo Erase”, then
press ENTER.
“Undo OK ?” appears in the display.
Press ENTER again to undo.
1 Press & STOP to set this unit to stop mode.
2 Press EDIT repeatedly to display “Disc Erase?”,
then press ENTER.
3
“DiscEraseOK?” appears in the display.
To cancel, press CANCEL (or & STOP).
3 Press ENTER again.
When all audio, name and title data has been erased
“Complete” appears momentarily.
To cancel before erasing the entire disc
Press CANCEL (or & STOP).
To undo ERASE
1
2
Press & STOP to set this unit to stop mode.
Press EDIT repeatedly to display “Undo Erase”, then
press ENTER.
“Undo OK ?” appears in the display.
3
Press ENTER again to undo.
To cancel, press CANCEL (or & STOP).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Erase
COMBINE
This function lets you combine two consecutive tracks into
one. After you combine the tracks, the total number of
tracks decreases by one and the tracks following the
combined tracks are renumbered.
This operation lets you erase part of a track.
1 Press # PLAY/* PAUSE to play the track
containing the part you want to erase.
2 Use SEARCH ! or ⁄ to locate the beginning
of the part you want to erase (point A), then press
# PLAY/* PAUSE to pause at that point.
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
)
!
⁄
SEARCH
#
*
PLAY/
PAUSE
POW ER
&
STOP
REC LEVEL
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
ENTER
0
10
—
+
3 Press EDIT repeatedly to display “A–B Erase?”,
$
›
then press ENTER.
Point A (from step 2) is registered and “Erase A–_” appears in
the display.
CANCEL
3
2
3,4
1
4 Use # PLAY/* PAUSE and SEARCH ⁄ to
locate the end of the part you want to erase (point
B).
1 Press & STOP to stop playback.
2 Turn the jog dial to select the second track of the
5 Press ENTER to register point B.
“Check” appears, then the part you specified plays
repeatedly and “Erase A–B?” appears in the display.
two you want to combine.
3 Press EDIT repeatedly to display “Combine ?”,
then press ENTER.
To adjust point B
“Check” appears momentarily, then the unit plays the 4
seconds before and after the point where the tracks will be
connected. “(track number) + (track number) OK?” appears in
the display.
Turn the jog dial while the “B” of “Erase A–B?” is blinking
Point B can be adjusted up to 2 second (176 steps) in either
direction.
6 Press ENTER again.
4 Press ENTER again.
The tracks are combined and “Complete” appears
momentarily.
The part is erased and “Complete” appears momentarily.
To cancel before erasing the part
Press CANCEL (or & STOP).
To cancel before combining the tracks
Press CANCEL (or & STOP).
To undo ERASE
1
2
Press & STOP to set this unit to stop mode.
Press EDIT repeatedly to display “Undo Erase”, then
press ENTER.
“Undo OK ?” appears in the display.
Press ENTER again to undo.
To undo COMBINE
1
2
Press & STOP to set this unit to stop mode.
Press EDIT repeatedly to display “UndoCombine”, then
press ENTER.
3
“Undo OK ?” appears in the display.
To cancel, press CANCEL (or & STOP).
3
Press ENTER again to undo.
To cancel, press CANCEL (or & STOP).
To erase parts spanning more than one track
Use the COMBINE function described below to combine
the tracks into one track before performing this operation.
Notes
• This operation is not possible when track 1 is selected.
• You can also divide the track later using the DIVIDE function.
• If “Can’t Edit” appears in the display the tracks cannot be
combined. This sometimes happens when you have edited
the same track many times. This is due to the technical
limitations of the MD system and is not a mechanical error or
malfunction.
Note
After part erase, a new track number is automatically assigned to
the section starting after point B.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DIVIDE
This function lets you divide one track into two separate
tracks by adding a new track number to a certain point in
the track. If you add a track number at the beginning of a
section you want to hear, you can access it quickly by
using the skip function during playback. After you divide a
track, the total number of tracks increases by one and the
tracks following the divided tracks are renumbered.
1,2
2
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
)
!
⁄
SEARCH
#
*
PLAY/
PAUSE
POW ER
&
STOP
REC LEVEL
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
ENTER
0
10
—
+
$
›
CANCEL
& STOP
3
3,5
4
1 Press # PLAY/* PAUSE to play the track you
want to divide.
2 Use SEARCH ! or ⁄ to locate the point
where you want to divide the track, then press #
PLAY/* PAUSE to pause at that position.
3 Press EDIT repeatedly to display “Divide ?”, then
press ENTER.
“Check” appears momentarily, then “Divide OK ?” appears
and the unit starts repeating the point where the track will be
divided.
4 If necessary, use the jog dial to adjust the
position of the point where the track will be
divided.
The divide position can be adjusted up to 2 second (255
steps) in either direction.
5 Press ENTER.
The track is divided and “Complete” appears
momentarily.
To cancel before dividing the track
Press CANCEL (or & STOP).
To undo DIVIDE
1
2
Press & STOP to set this unit to stop mode.
Press EDIT repeatedly to display “Undo Divide”, then
press ENTER.
“Undo OK ?” appears in the display.
3
Press ENTER again to undo.
To cancel, press CANCEL (or & STOP).
Notes
• You can also combine the tracks later using the COMBINE
function.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TITLING
This function lets you title recorded MDs and the individual
3 Using the front panel
tracks. Titles may consist of uppercase and lowercase
letters, numbers, and symbols for a maximum of up to 250
characters for each title.
Press CHARA. repeatedly to select between
uppercase letters (A), lowercase letters (a), and
numbers (0).
Note : To access the symbols, press CHARA. repeatedly to
select “A”, then turn the jog dial to the left.
DELETE
SEARCH ! ⁄
Using the remote
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
Press CHAR. repeatedly to select between uppercase
)
letters (A) and lowercase letters (a).
!
⁄
SEARCH
#
PLAY/
PAUSE
POW ER
&
STOP
*
REC LEVEL
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
ENTER
0
10
—
+
4 Use the jog dial (or the character buttons (or
SKIP $ or ›) on the remote) to select a
$
›
character, number, or symbol.
Example (using the remote):
& STOP
5 4
3
2
To select “A”, press 1 [ABC] once.
To select “B”, press 1 [ABC] twice.
To select “C”, press 1 [ABC] three times.
To select “1”, press NUMBER, then press 1 [ABC].
!
?
DISPLAY SCROLL
5 Press SET to move the cursor into position for the
S/
F
A–B
REPEAT
&
–
(
)
#
RNDM
PROG
next character.
A
P
B
1
C
R
D
S
E
F
G
H
I
J
K
4
L
M
N
5
O
2
3
Q
6
T
7
U
V
W
8
X
Y
Z
/
4
9
0
6 Repeat steps 3 through 5 to complete your title.
SPACE
+1 0
3
2
DELETE
To delete a character (ABCD = ABD)
1 Use SEARCH ! or ⁄ to move the cursor to the position
of the character you want to delete.
2 Press DELETE.
TITLE
CHAR. NUMBER DELETE
SET
5
SEARCH
M-MARK MONO/ ST INPUT
REC
!
⁄
SEARCH
! ⁄
SKIP
$
›
TIME
SYNC
PLAY
PAUSE
STOP
REC
To insert a character (ABCD = ABTCD)
1 Use SEARCH ! or ⁄ to move the cursor to the position
where you want to insert the character.
2 Use CHARA. and the jog dial (or CHAR. and the character
buttons on the remote) to select the new character.
3 Press SET to set the character. The character previously in
that position automatically moves to the right.
‹
*
&
?
CD-P
4
s
M DX
& STOP
To insert a space (ABCD = AB CD)
1 Use SEARCH ! or ⁄ to move the cursor to the position
where you want to insert the space.
2 Press +10 [SPACE] on the remote.
1 To title a disc
Press & STOP to stop playback.
7 Press TITLE to exit the title mode.
If a title consists of more than 12 characters, it will scroll
across the display once and then be displayed in abbreviated
form (first 12 characters only).
To title a track
• During stop mode
Use the jog dial (or SKIP $ or › on the remote) to select
the track you want to title.
• During playback or pause
To undo TITLE
Use the jog dial (or SKIP $ or › on the remote) to select
the track you want to title, or go directly to step 2 to title the
current track.
During playback, the unit automatically repeats the selected
track while are entering the title.
1
Press & STOP to display the total tracks and total
playing time on the disc.
2
Press EDIT repeatedly to display “Undo Title”, then
press ENTER.
• During recording
“Undo OK ?” appears in the display.
Go directly to step 2 to title the current track.
Recording continues normally while you are entering the title
for the selected track.
3
Press ENTER again to undo.
To cancel, press CANCEL (or & STOP).
2 Press TITLE to activate the title mode.
The cursor appears in the display.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER OPERATIONS
With a commercially available audio timer it is possible to make recordings and initiate playback automatically at any time.
Make sure that all power cord connections between the timer and amplifier/receiver are properly made.
For details, refer to the instructions of your audio timer. No change in any of the other connections between the recorder and
amplifier/receiver, etc., is necessary.
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC
PLAY
)
TIMER
!
⁄
SEARCH
#
*
PLAY/
PAUSE
POW ER
&
STOP
REC LEVEL
REC
DISPLAY TITLE CHARA. DELETE
CANCEL
EDIT
SET
INPUT
ENTER
0
10
—
+
$
›
To AC outlet
Amplifier
Tuner
Audio timer
Timer Recording
Timer Playback
1 Turn on the power to each component, then set
1 Turn on the amplifier/receiver and adjust the
your tuner to the station you want to record.
volume and tone controls.
2 Set this unit’s recording options.
2 Set the input mode selector of your amplifier/
Select digital or analog inputs, auto or manual marking,
and stereo or mono recording. When recording analog
signals, be sure to set the recording level. (See pages
13, 14 and 16 for details regarding these operations.)
receiver to MD.
3 Set the timer to the times at which you want to
start and stop playback.
3 Turn down the volume on your amplifier/receiver.
4 Set TIMER to PLAY.
This has no effect on the recording level.
TIMER
OFF
REC
PLAY
4 Set the timer to the times at which you want to
start and stop recording.
We recommend setting the timer to start a few minutes before
and stop a few minutes after the actual broadcast to leave
some room for later editing.
When the preset time arrives, the timer turns on the
components (amplifier/receiver and MD recorder) and
the MD recorder starts to play. When the stop time
arrives, the timer stops the playback by turning off the
components.
5 Set TIMER to REC.
TIMER
OFF
REC
PLAY
Notes
• Playback always starts from the beginning of the MD
• Set TIMER to OFF when not using the timer play function. If
the power is turned on (by pressing POWER, plugging in the
power cord, etc.) when TIMER is set to PLAY, the MD
recorder will start to play and may cause a sudden output at
high volume.
When the preset time arrives, the timer turns on the
components (amplifier/receiver, tuner and MD
recorder) and the MD recorder starts to record. When
the stop time arrives, the timer stops the recording by
turning off the components.
Notes
• When recording to a blank MD, recording starts from the
beginning. When recording to a previously recorded MD,
recording starts from the end of the last track.
• Set TIMER to OFF when not using the timer recording
function. If the power is turned on (by pressing POWER,
plugging in the power cord, etc.) when TIMER is set to REC,
the MD recorder will start recording automatically.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MD SYSTEM LIMITATIONS
The recording system in your MD recorder is radically
Tracks created through editing may exhibit sound
dropout during search operations.
different from those used in cassette and DAT decks and is
characterized by the limitations described below. Note,
however, that these limitations are inherent to the MD
recording system and are not a result of mechanical
trouble.
Track numbers are not recorded correctly
Incorrect assignment or recording of track numbers may
result when CD tracks are divided into several smaller
tracks during digital recording.
“Can’t REC” is displayed before the maximum
recording time (60 or 74 minutes) has been reached
It is not possible to erase part of a track using the A-B
ERASE function
Once 255 tracks have been recorded on one MD, “Can’t
REC” is displayed regardless of the total recorded time.
More than 255 tracks cannot be recorded on one MD. To
continue recording, erase unnecessary tracks, combine
tracks to reduce the total number of tracks, or use another
recordable MD.
This unit organizes the audio data in sound groups and
clusters. The minimum size of these units varies according
to the number of channels being recorded. For a 2 channel
(stereo) recording, a single unit may not consist of less
than 10 seconds of sound. For a 1 channel (mono)
recording, a single unit may not consist of less than 20
seconds of sound.
“Disc Full” is displayed before the maximum number of
tracks (255) have been recorded
During Automatic Track Marking, fluctuations in emphasis
within songs may be interpreted as song intervals,
increasing the song count and causing “Disc Full” to be
displayed.
Limitations when recording over an existing track
• The correct remaining recording time may not be
displayed.
• You may find it impossible to record over a track if that
track has been recorded over several times already. If
this happens, erase the track using the Erase Function.
• The remaining recording time may be shortened out of
proportion to the total recorded time.
• Recording over a track to eliminate noise is not
recommended since this may shorten the duration of the
track.
The remaining recording time does not increase even
after erasing numerous short tracks
Tracks under 12 seconds in length are not counted and so
erasing them may not lead to an increase in the recording
time.
• You may find it impossible to label a track while
recording over it.
“TOC Reading” is displayed continuously
The “TOC Reading” display lasts longer than normal when
a brand new (blank) disc is inserted.
The correct recorded/playing time may not be displayed
during playback of monaural-format MDs.
The total recorded time and the remaining time on the
MD do not total to the maximum recording time
•
Recording is done in minimum units of 2 seconds
each, no matter how short the material. The contents
recorded may thus be shorter than the maximum
recording capacity. Disc space may also be further
reduced by scratches.
•
This unit displays the length of the largest continuous
blank area as the remaining time. Therefore, if there
are several separate blank spaces, the remaining time
will only display a time equivalent to the largest
continuous blank space.
If there is a 1 minute blank space and a 2 minute blank
space, the remaining time display will be “2” minutes. If
you then record 1 minute and 30 seconds of the 2
minute blank, the remaining time display will become
“1” minute.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES REGARDING THE
REMOTE CONTROL
COPY PROTECTION (SCMS)
As a digital audio component, this MD recorder conforms
with the Serial Copy Management System (SCMS)
standards. The Serial Copy Management System restricts
copies made by recording digital signals to first-generation
copies only. Therefore, an MD recorded through a digital
input cannot be used as a source for making another
digital recording.
Remote control operation range
However, subsequent recordings can be made from the
first-generation copy by using the analog input/output
jacks.
6 m
There are three general rules that apply to this unit.
30°
30°
Rule 1
You can record from digital program sources (CDs, DATs
or pre-mastered MDs) onto a DAT tape or recordable MD
via the digital input jack on a DAT or MD recorder. You
cannot, however, record from this recorded DAT tape or
MD to another DAT tape or recordable MD via a digital
input jack.
Notes
• There should be no large obstacles between the remote
control and the remote sensor on the main unit.
• Strong light (especially from an inverter type fluorescent lamp)
shining directly on the remote sensor may prevent proper
operation. In such cases, reposition the main unit to avoid
direct lighting.
Rule 2
You can record a digital signal input from a digital satellite
broadcast onto a DAT tape or recordable MD via the digital
input jack on the DAT or MD recorder. (This unit is
equipped with a sampling rate converter that allows you to
make digital recordings from 32 kHz, 44.1 kHz, or 48 kHz
digital program sources).
Battery installation
If the broadcast does not contain a copyright protection
code, you can then record the contents of this recorded
DAT tape or MD (first-generation) onto another DAT tape or
recordable MD via a digital input jack on the DAT or MD
recorder to create a second generation digital copy (these
copies may also be copied digitally). Note, however, that if
the broadcast contains a copy protection code, second-
generation digital copying will not be possible.
Rule 3
You can record a DAT tape or MD recorded via the DAT or
MD recorder’s analog input jack onto another DAT tape or
MD via the DAT or MD recorder’s digital output jack. You
cannot, however, make a second-generation DAT tape or
MD copy via the DAT or MD recorder’s digital output jack.
Battery replacement
When you notice a decrease in the operating range of the
remote control, replace both batteries with new ones.
Notes
• Use only AA, R6, UM-3 batteries for replacement.
• Be sure to insert the batteries with correct polarity (as
illustrated on the battery compartment).
• Remove the batteries if the remote control will not be used for
an extended period of time.
• If batteries leak, dispose of them immediately. Avoid toughing
the leaking material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If your MD recorder fails to operate normally, check the following table. It lists common operating errors and simple
measures which you can take to correct the problem. If it cannot be corrected, or the symptom is not listed, disconnect the
recorder’s power cord and contact your authorized YAMAHA dealer or service center for help.
Fault
Cause
Cure
The unit does not respond to
operations.
• MD is dirty or damaged.
• MD is damaged (“UTOC ERR appears
in the display).
• Replace the current disc with a new
one.
It happens that this unit does not work
normally.
• There is an influence of strong external
noise (lightning, excessive static
electricity, etc.) or a misoperation was
performed while using this unit.
• Turn this unit power off and disconnect
the AC power from the AC outlet. After
about 30 seconds have passed,
connect the power and try again.
Playback is not possible.
• Moisture on the laser pickup.
• Leave the unit switched ON and wait 20
to 30 minutes for the moisture to
evaporate before trying to play the disc.
• Press POWER to turn the power ON.
• Reload the disc with the label side
facing up, and the arrow pointing
toward the disc insertion slot.
• The power is OFF.
• The disc has been loaded incorrectly.
• An unrecorded (blank) MD was loaded
(“Blank Disc” appears in the display) .
• Insert a recorded MD.
Recording is not possible.
• The disc is record protected
(“Protected” appears in the display).
• A pre-mastered MD is loaded
• Slide the record-protect tab to the
closed position.
• Load a recordable MD.
(“PlaybackMD” appears in the display).
• The source is not connected correctly.
• The input setting is incorrect.
• Check all connections again.
• Press INPUT repeatedly to select the
correct input jacks.
• The recording level is too low.
• Turn REC LEVEL to adjust the recording
level.
• The digital output level of the digital
source is too low.
• Set the digital output level of the digital
source to “MAX”.
• There is not enough blank space left on
the MD.
• Load a recordable MD with fewer
recorded tracks, or erase unnecessary
tracks from the current MD.
• If recording was interrupted, try
recording again starting from the
beginning.
• If the power cord was unplugged or
there was a power outage during
recording, that recording may be lost.
The MD cannot be removed when
partially inserted.
• The carriage lock function has activated.
• Insert the MD completely, then press 0
to eject it.
Excessive noise.
• The unit is too close to a television or
other component.
• Place the unit farther away from the
television or other component.
The remote control does not operate.
• The batteries are exhausted.
• The remote control transmitter is
operated from an incorrect distance or
angle.
• Replace batteries.
• Operate it from less than 6 meters
(about 20 feet) and 30°.
• The remote control sensor is located in
strong direct light.
• Place the unit away from the strong
light.
To clean the cabinet
Use a soft cloth slightly moistened with mild detergent solution.
Care of MDs
• Do not expose the MD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight
as there can be a considerable rise in temperature inside the car.
• Periodically remove dust and debris from the cartridge surface by wiping it with a dry cloth.
• Because the MD itself is housed in a cartridge, you can handle it normally without being concerned about dirt or
fingerprints. However, malfunctioning may result if the cartridge itself is dirty or warped.
Do not open the shutter on the MD cartridge
Trying to force the shutter open will damage the shutter.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TMP Over!!
DISPLAY MESSAGES
The temperature of the unit has exceeded the normal
operating temperature. Turn off the unit and let is cool
down. If the unit is installed in a place with little ventilation
(such as a built in bookcase), move the unit to another
location with better ventilation.
Can’t Copy
You cannot make a digital recording. (See “COPY
PROTECTION (SCMS)” on page 24.)
TOC Writing
Can’t Edit
The TOC data is being written to the disc. Do not move the
unit or pull out the mains lead. If you do, recorded material
may not be saved normally.
Edit operations are not possible.
Can’t Play!
Timer playback is not possible. The loaded disc may be
blank, damaged, or it may be an incompatible format.
TOC Reading
The unit is reading the TOC data.
Can’t REC!
Protected
Timer recording is not possible. The loaded disc may be
protected or there may not be enough blank space
remaining on the disc.
The record protection on the inserted MD is set to
“protect”.
Playback MD
Can’t REC
The inserted MD is a designed for playback only (you
cannot record on this disc).
Recording is not possible because there is not enough
blank space remaining on the disc.
MONITOR OUT
DIGin Unlock
The monitor out function is active. The audio signal input
to the selected input terminals is output from this unit’s
output terminals.
No digital signal being input to the selected digital input
jack.
Disc Full
Recording is not possible because there is no blank space
remaining on the disc.
Program Full
Additional steps cannot be programmed because the
maximum number of steps (30) have already been
programmed.
Title Full
Additional characters cannot be input for the current title
because the maximum number of characters for a single
title (250) have already been input.
UTOC WError
Error occurred when writing to the UTOC.
Not Audio
The inserted disc is not an audio MD.
Tr Protected
The selected track cannot be edited because it is
protected.
TOC Full
The disc area allotted for TOC data has become full and
further editing is not possible.
UTOC ERR L...
Problem involving UTOC data.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Digital audio system
Inputs
System
LINE IN (REC)
MiniDisc digital audio system
Disc
Type: pin jack
Input impedance: greater than 27 k-ohms
Standard input level: 120 mV
DIGITAL IN (COAXIAL)
MiniDisc
Recording method
Magnetic field variation overwrite
Reading method
Non-contact optical pickup (using semiconductor
laser)
Laser
Type: pin jack
Input impedance: 75 ohms
Standard input level: 0.5 Vp-p
DIGITAL IN (OPTICAL) 1/2
Type: square optical connector jack
Semiconductor laser
Laser Diode Properties
Material: GaAIAs
Outputs
Wavelength: 780 nm
Pulse time:
Read mode 0.8 mW Continuous
LINE OUT (REC)
Type: pin jack
Standard output level: 2.0 ±0.5 Vrms
DIGITAL OUT (OPTICAL)
Type: square optical connector jack
...
...
Write mode
max 10 mW 0.5S
min cycle 1.5S
Repetition
Record/playback time
Max. 74 minutes (using MDW-74 disc)
74 minutes (stereo)
GENERAL
148 minutes (mono)
Revolutions
Approx. 400~900 rpm (CLV)
Error Correction
ACIRC (Advanced Cross Interleave Reed-solomon
Code)
Sampling frequency
44.1 kHz (32 kHz and 48 kHz signals converted to
44.1 kHz for recording)
Coding
ATRAC (Adaptive TRansform Acoustic Coding)
Modulation system
EFM (Eight-to-Fourteen Modulation)
Number of channels
2 (stereo) or 1 (mono, for extended recording)
Frequency Response
Power Supplies
230 V, 50 Hz
Power Consumption
20 W
Dimensions (W x H x D)
280 x 82.5 x 362 mm (11" x 3-1/4" x 14-1/4")
Weight
4 kg (8 lbs. 13 oz.)
Accessories
Remote Control
1
Audio cord
2
Batteries (size AA, R6, UM-3)
2
5 ~ 20,000 Hz ±0.5 dB
Signal-to-Noise Ratio
Specifications subject to change without notice.
More than 98 dB during playback
Wow and Flutter
Below measurable limit
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Klassmärkning för Finland
•
•
CAUTION
Use the minidisc recorder only in accordance with
the instructions given in this manual and do not
attempt to interfere with the interlock switch or
make any other adjustments as this may result in
exposure to hazardous radiation.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
VORSICHT
Verwenden Sie den Mini-Disc Recorder nur
entsprechend den in dieser Anleitung
angegebenen Anweisungen, und versuchen Sie
nicht, den Verriegelungsschalter zu
beeinträchtigen, oder machen Sie keine andere
Einstellung, da dies dazu führen kann, gefährlicher
Ausstrahlung ausgesetzt zu werden.
VÝSTRAHA: VÝROBEK JE VYBAVEN LASEREM. PŘI
NESPRÁVNÉ MANIPULACI S PŘÍSTROJEM V
ROZPORU S TÍMTO NÁVODEM MŮŽE DOJÍT K
NEBEZPEČNÉMU OZÁŘENÍ. NEOTVÍREJTE A
NESNÍMEJTE PROTO ŽÁDNÉ KRYTY A PŘÍSTROJ
NEOPRAVUJTE. OPRAVU A SERVIS SVĚŘTE
ODBORNÉMU SERVISU.
•
•
•
•
•
ATTENTION
Utiliser le lecteur-enregistreur minidisc en
respectant les indications données dans ce manuel
et éviter l’intervention sur le commutateur de
verrouillage ou tout autre réglage. En cas de non-
respect, on s’exposera à une radiation dangereuse.
PRECAUCIÓN
Utilice el grabador/reproductor minidisc sólo de
acuerdo con las instrucciones dadas en este
manual y no intente interferir el interruptor de
bloqueo ni realizar ningún otro ajuste porque podría
ocasionar la exposición a radiacón peligrosa.
OBSERVERA
Använd den miniskivinspelaren endast i enlighet
med anvisningarna i denna bruksanvisning och
försök inte påverka låsningsströmbrytaren eller göra
andra inställningar som kan leda till risk för farlig
strålning.
ATTENZIONE
Quando si usa il registratore de minidisc, seguire le
istruzioni di questo. Non cercare di interferire con
l’interruttore interbloccato e non effettuare altre
regolazioni, poiché ciò potrebbe provocare
un’esposizione a pericolose radiazioni.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN
TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
LET OP
Gebruik deze MiniDisc-recorder alleen zoals in de
aanwijzingen in deze gebruiksaanwijzing staat
vermeld. Maak geen veranderingen in de
interlockschakelaar of andere onderdelen, daar dit
mogelijk blootstelling aan gevaarlijke stralingen
veroorzaakt.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT
SÄTT ÄN I DENNA BRUKSANVISNING
SPECIFICERAS. KAN ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER
GRÄNSEN FÖR LASERKLASS 1.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Japan
VZ 66730
Download from Www.Somanuals.com. All Manuals Search And Download.
|