Xerox Printer P1210UG 8 User Manual

P1210UG-8 6/30/00 3:59 PM Page 1  
User Guide (EN)  
Guide de l’Utilisateur (FR)  
Guía del Usuario (ES)  
Guia do Usuário (PT)  
User Guide (ZH)  
721P56290  
D o c u P r i n t P 1 2 1 0  
LASER PRINTER (EN)  
LASER PRINTER (FR)  
LASER PRINTER (ES)  
LASER PRINTER (PT)  
LASER PRINTER (ZH)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.1  
T A B L E O F C O N T E N T S  
E n g l i s h  
TABLE OF CONTENTS  
EN  
FR  
ES  
PT  
ZH  
Unpacking  
1-2  
1-3  
Thank you for purchasing the Xerox  
DocuPrint P1210. In this guide you will  
find information essential for setting up and  
operating your laser printer.  
Printer Components  
Connections  
1-4  
Control Panel  
1-4  
Cartridge Installation  
Loading Paper  
1-5  
1-7  
Installing Software  
Print Driver Features  
Multi-Purpose Tray Printing  
Printer Specifications  
Troubleshooting  
1-9  
1-13  
1-14  
1-16  
1-17  
1-21  
1-23  
1-24  
1-25  
Installing Memory  
Getting More Information  
Printer Certifications  
Language Codes  
U s e r G u i d e  
1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.2  
U N P A C K I N G  
Unpacking  
AC Power  
Cord  
PC Parallel  
Cable  
Included in some countries.  
(meets IEEE 1284  
specifications)  
DocuPrint P1210  
Note: Carefully  
remove any shipping  
tape from the  
printer.  
Print  
Cartridge  
CD  
User Guide  
Note: The DocuPrint P1210 is equipped with a  
parallel port for use with IBM Compatible  
computers (with a 100mhz Pentium or higher  
equivalent processor.) USB cable sold separately.  
Note: Place the printer on a flat, stable surface  
leaving 6 inches (15cm) around the printer and 1  
foot (30cm) of space in front.  
Do not place the printer in direct sunlight, near  
heat sources or air conditioners, in dusty or dirty  
environments, or near devices that contain  
magnets or generate magnetic fields (such as  
loud speakers or base units of cordless  
telephones.)  
1.2  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.3  
P R I N T E R C O M P O N E N T S  
Top Cover  
Front View  
Control Panel  
Top Tray  
(Face Down Output)  
Multi-Purpose Tray  
(Manual Feed)  
Tray 1  
Paper Level Indicator  
EN  
FR  
ES  
PT  
ZH  
Rear View  
Rear Cover/Rear Tray  
(Face Up Output)  
USB Port  
Parallel Port  
Power Switch  
Power Cord Connector  
U s e r G u i d e  
1.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.4  
C O N N E C T I O N S / C O N T R O L P A N E L  
Connections  
1
USB Cable  
Connect cable.  
(Sold separately)  
or  
Parallel Cable  
Connect cable.  
AC Power Cord  
2
Connect to your printer to a  
properly grounded outlet.  
Turn the power on.  
Caution: Turn off your computer  
before connecting your printer  
cable or power cord.  
Control Panel  
Error Light  
Blinking: Insufficient memory  
On: Cover open, cartridge not installed or  
not seated properly  
Manual Light  
On with Paper Light: Paper jam  
On: Multi-purpose tray  
(manual feed) ready  
Press print button to start job  
Paper Light  
On: Out of Paper  
On with Error Light: Paper jam  
Data Light  
On: Ready to receive data  
Slow blink: Receiving data  
Fast blink: Printing  
Cancel Button  
Note:When all lights are  
blinking, this indicates a system  
error. Turn the power off and  
then back on to clear. If problem  
persists, call your local Xerox  
Helpline.  
To cancel print job, hold the cancel  
button until all lights blink, then release.  
Print Button  
To print a Configuration Sheet, hold the print  
button until all lights blink, then release.  
1.4  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.5  
C A R T R I D G E I N S T A L L A T I O N  
Print Cartridge Installation  
Open the top cover.  
1
Remove the print cartridge from the bag.  
2
EN  
FR  
ES  
PT  
ZH  
Note: Do not expose cartridge to direct  
sunlight or strong room light for more  
than 10 minutes.  
Carefully remove the sealing tape from the  
print cartridge.  
3
Note: Pull sealing tape completely out  
of the cartridge.  
U s e r G u i d e  
1.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.6  
C A R T R I D G E I N S T A L L A T I O N  
Shake the print cartridge from side to side  
to distribute the toner evenly.  
4
5
Holding the print cartridge by the handle,  
insert the cartridge into the printer until it  
clicks into place.  
Close the top cover securely.  
6
1.6  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.7  
L O A D I N G P A P E R  
Loading Paper  
Pull the paper tray out.  
1
Caution: Do not remove tray while printing.  
This may cause paper jams.  
Press the bottom plate until it locks  
into place.  
2
3
EN  
FR  
ES  
PT  
ZH  
Pinch the Rear Paper Guide and adjust to  
the length of the print media.  
Rear Paper  
Guide  
For legal or folio size paper, press the tab  
down and pull the rear wall all the way out,  
to adjust tray length.  
4
U s e r G u i d e  
1.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.8  
L O A D I N G P A P E R  
Load paper. Ensure that the paper is placed  
5
beneath the metal corner guide. If using  
pre-printed paper, load paper with the print  
side facing down.  
Note: Observe the maximum limit  
indicator. Tray holds a maximum of 250  
sheets of paper.  
Adjust the Side Guide to lightly touch  
the paper.  
6
Side Guide  
Insert the tray back into the printer.  
7
1.8  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.9  
I N S T A L L I N G S O F T W A R E  
Installing Software  
The P1210 supports many operating systems  
Please go to the section which corresponds  
with your operating system for installation  
instructions.  
CD Contents  
• Software Utilities  
• Print Drivers  
Installation for Windows 95, 98,  
NT 4.0, 2000  
• Reference Guide  
1 Insert the Xerox DocuPrint P1210 CD into  
your CD-ROM drive. If Windows runs your  
CD automatically, skip to step 4.  
– Print Media Specifications  
– Configuring the PCL Driver  
– Setting Properties  
– Driver Features  
– Using Printer Utilities  
– Solving Printing Problems  
2 Select Run from the Start menu.  
3 Type d:\setup.exe (where “d” is your CD-  
ROM drive letter), then click OK.  
EN  
FR  
ES  
PT  
ZH  
4 Select the appropriate language.  
5 Select the Print Driver and follow the  
on-screen instructions to install.  
6 If desired, install RCP (Remote  
Control Panel).  
Note: RCP is a Windows-based program  
that allows the user to set default printer  
values.  
7 If connected to the printer by a USB  
connection and using Windows 98, you will  
need to install the USB Port Driver located  
on the CD. Select your appropriate  
Note: For Windows 98, the USB port  
driver must be installed in order to print to  
the DocuPrint P1210 via a USB  
connection.  
language, then select USB Port Driver.  
You are now ready to print from your PC.  
U s e r G u i d e  
1.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.10  
I N S T A L L I N G S O F T W A R E  
Installation for Macintosh  
Note: In order to print from your  
Macintosh to the DocuPrint P1210, you  
must be running OS 8.6x or higher  
operating system and have a USB  
enabled Macintosh.  
1 Insert the Xerox DocuPrint P1210 CD into  
your CD-ROM drive.  
2 Double click the P1210 CD.  
3 Based on the table located in the back of  
this guide, select your appropriate  
language code (ie. “EN” for English).  
4 Click on the folder Installer, and double  
click the P1210 installer icon.  
5 Click Continue then Install to install the  
print driver.  
CD Contents  
• Print Driver  
6 After the driver is installed, select Quit to  
finish installation or select Continue to  
install the PostScript Printer Descriptions.  
• Reference Guide  
– Print Media Specifications  
– Configuring the PCL Driver  
– Setting Properties  
– Driver Features  
– Using Printer Utilities  
– Solving Printing Problems  
7 Go to the Chooser. Select the Xerox  
Docuprint icon and then select Docuprint  
P1210 in the scroll window. Close  
the Chooser.  
You are now ready to print to your  
DocuPrint P1210 from your Macintosh.  
1.10  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.11  
I N S T A L L I N G S O F T W A R E  
Linux Installation  
Note: these instructions are a guide to  
installing the PCL5e driver for Linux. The  
Linux driver installation script supports  
RedHat 6.0 or greater.  
1 Log in to Linux as Super User (root)  
account.  
2 Insert the Xerox DocuPrint P1210 CD  
into the CD-ROM drive.  
3 Open a terminal window.  
For Gnome interface users, (Utilities  
GNOME terminal.)  
4 Mount your CD-ROM and run a  
script file:  
mount -t iso9660 /dev/cdrom /mnt/ cdrom  
cd /mnt/cdrom/en/linux  
./install.sh  
5 Setup your print driver using printtool.  
EN  
FR  
ES  
PT  
ZH  
• Run the printtool program.  
Run program...  
printtool, select Run.  
If you get an error message, regarding  
ncpfs, click Ignore to continue installing a  
local printer.  
• From the RedHat Linux Print System  
Manager, select Add, Printer type:  
Check mark Local printer, then click OK.  
• An Auto-detection device dialogue box  
should idicate that /dev/1p0 is “Detected”.  
click OK.  
• The Edit Local Print Entry dialogue box  
should appear. Use the defaults, click  
Select.  
• For printer type, select Xerox DocuPrint  
Series PCL5e Compatible, click OK.  
U s e r G u i d e  
1.11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.12  
I N S T A L L I N G S O F T W A R E  
• On Edit Local Printer Entry dialogue  
box, click OK.  
Note: The P1210 is dependant upon the  
native driver shipping with your Linux  
RedHat OS. Therefore, the features and  
functions listed in the table on the next  
page may not all be available.  
6 At the end of installation, close  
RedHats printtool by clicking “X” in the  
upper right hand corner of the windows.  
Your Xerox Printer will be the default printer  
(lp) for printing. If printing a postscript (.ps)  
file, use the lpr command to print. For  
instance, if a print command for readme.pdf  
generates a readme.ps file, open a terminal  
window and type “lpr readme.ps” in order to  
print this file.  
1.12  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.13  
P R I N T D R I V E R F E A T U R E S  
PCL Print Driver Features  
Properties  
Number of Copies  
Paper Size  
Usage /Description  
Windows*  
Mac  
Select 1-999 copies  
Select from supported paper sizes  
(See “Printer Specifications”).  
Select Printing from Tray 1, MP Tray or  
Tray 2 (if installed).  
Paper Source  
Paper Type  
Select from Plain paper, Bond,  
Transparency, Card stock, Preprinted,  
Colored paper, Envelope  
Select enhancement setting for graphical  
and/or text printing.  
Image Quality  
True Type Fonts  
Toner Saver  
Select font printing.  
Select for draft mode printing.  
EN  
FR  
ES  
PT  
ZH  
Graphics Mode  
Page Orientation  
Select vector or raster mode.  
Select Portrait or Landscape.  
Manual 2 Sided printing  
Print two-sided documents.  
Select 1-16 (Windows) or 1-4 (Mac)  
images per physical page.  
Multiple Up (Win)/  
Layout (Mac)  
Booklet Printing  
Poster Printing  
Create booklets from documents.  
Create posters from documents.  
Adjust image to fit to page size.  
Create and use watermarks on documents.  
Fit to Page (Win)/  
Scaling (Mac)  
Watermarks  
Note: Refer to the Reference Guide on your CD for more information.  
*These features can be located under the Properties tab of your Print Menu.  
The watermark feature for Macintosh can be located under Page Setup.  
U s e r G u i d e  
1.13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.14  
M U L T I - P U R P O S E T R AY P R I N T I N G  
Multi-Purpose Tray Printing  
Note: When printing on certain envelopes,  
heavier weight papers, trnsparencies, or  
paper labels, manually feed them one at a  
time through the Multi-Purpose tray.  
The Multi-Purpose Tray (Manual Feed) is to  
be used as an alternate paper source for  
printing onto special print media.  
Pull open the Multi-Purpose Tray  
(front panel).  
1
2
3
Pull out the Multi-Purpose Tray Extension.  
Multi-Purpose Tray  
Extension  
Load print media against the left edge of  
the tray then slide the width guide on the  
right against the print media. Observe the  
maximum limit indicator. Do not  
overload tray.  
1.14  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.15  
M U L T I - P U R P O S E T R AY P R I N T I N G  
Load envelopes, with the flap down, against  
the left edge of the tray then slide the width  
guide on the right against the envelopes.  
4
Note:You can stack up to 100 sheets of  
paper or 10 envelopes for automatic feeding.  
Caution: Never use envelopes with clasps, snaps,  
windows, coated linings, or self-stick adhesives.  
These envelopes may severely damage the  
printer. Do not feed stamped envelopes through  
the printer.  
EN  
FR  
ES  
PT  
ZH  
When printing on special media, open the  
rear output tray cover and pull out the paper  
support extension.  
5
When you finish printing from the Multi-  
Purpose Tray, push the support extensions  
back in and close both covers.  
6
U s e r G u i d e  
1.15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.16  
P R I N T E R S P E C I F I C A T I O N S  
Printer Specifications  
Item  
Specification and Description  
Print Speed  
Resolution  
Up to 12ppm (A4/Letter)  
True 600 x 600 dpi; 1200 dpi Resolution (Windows)  
Face Down: 250 Sheets, Face Up: 100 Sheets  
Output Capacity  
Input Capacity  
Tray 1: 250 sheets of paper (16 to 28lbs/60 to 105gsm)  
MP Tray: 100 sheets of paper (16 to 53lbs/60 to 199gsm) or 10 envelopes  
Option Tray 2: 550 sheets of paper (16 to 28lbs/60 to 105gsm)  
Power Rating  
AC100~128V/200V~240V, 50/60Hz  
Acoustic Noise  
Standby: Less than 39dB; Operating: Less than 49dB  
Temperature: 10~30˚C/ 50~90˚F; Humidity: 20~80%RH  
Operating  
Environment  
14.9 Kg/ 32.8 lbs. (with packaging materials)  
Weight  
External  
Dimensions  
360(W) X 407(D) X 249(H)mm/ 14.2(W) X 16.1(D) X 9.8(H)in.  
Laser Print Cartridge: Yield approximately 3,000 letter/A4 pages, 5% area  
coverage (included with the printer) Reorder number: 106R441 (for Canada,  
Europe, Middle East Africa and the US), 106R439 (for all other countries.)  
Print Cartridge  
High Yield Laser Print Cartridge: Yield approximately 6,000 letter/A4 pages, 5%  
area coverage. Reorder number: 106R442 (for Canada, Europe, Middle East  
Africa and the US), 106R440 (for all other countries.)  
Emulation  
Fonts  
PCL6, PCL5e, Epson; PostScript Level 3 (optional)  
45 scalable (35 Intellifont,1 Bitmap, Euro)  
66MHz, 32 bit RISC processor  
CPU  
Memory  
Standard 4MB, Expandable to 68MB: (Installed into the slot labeled DRAM  
Module) 72 pin, EDO, non-parity: 60ns. 8MB, 16MB, 32MB or 64MB  
Interface  
Bidirectional Parallel Standard (IEEE 1284)  
–Modes supported: Compatible, Nibble, Byte, ECP  
USB Interface Standard  
–USB 1.0/1.1 compliant, 12Mbps, 1 port  
1.16  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.17  
T R O U B L E S H O O T I N G  
Troubleshooting  
Problem  
Possible Cause  
Things to try...  
If the Data Light is off, check the power  
switch and power source.  
The printer does not print  
Data Light is not on.  
Check all connections. If using a parallel  
cable, make sure the clips on the  
connector are securely fastened.  
Printer Cable is not connected  
properly.  
Error Light is on.  
Check to see that the print cartridge is  
properly inserted in the machine.  
Paper Light and Error Light are on.  
Paper Light is on.  
Check to see if there is a paper jam.  
Printer is out of paper; add paper.  
Printer is in manual feed mode and is  
waiting for paper to be fed through the  
MP Tray.  
Manual Light and Data Light are on.  
EN  
FR  
ES  
PT  
ZH  
Remove the print cartridge and shake it  
gently to evenly distribute the remaining  
toner, then reinsert the cartridge or insert  
a new print cartridge.  
Faded printing  
Toner is low, time to replace the  
print cartridge.  
Reduce the complexity of the print job;  
Do not send the entire job to the printer,  
instead print it in sections, i.e., pp 1-5,  
pp 6-10, etc.; Reduce the print resolution,  
i.e., from 1200 dpi to 600 dpi; Add a  
minimum of 8MB of additional memory.  
Job did not completely print; Out of memory  
received an error sheet  
In PCL driver, change your Image  
Quality mode to raster and select text  
mode: download as bitmap image.  
Printed page has some  
missing characters or data  
Differences in vector mode vs. raster  
mode  
Difficulties printing via  
the parallel port  
(Windows users)  
Printer is not directly connected to  
the PC  
If you have any intermediate device  
between PC and printer, please remove  
device and connect printer directly to PC.  
Illegal Operation Error  
Message  
Report error to your local support  
organization.  
Print Driver error  
Note: For more troubleshooting tips, please refer to the electronic Reference Guide, which is  
available on the product CD provided with your printer.  
U s e r G u i d e  
1.17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.18  
T R O U B L E S H O O T I N G  
Clearing Paper Jams Inside  
the Printer  
Note: On the rare occasion you encounter  
a paper jam, the following instructions  
will assist you in clearing the jam.  
Open the top cover and remove the print  
cartridge. Once the print cartridge is  
removed from the printer, be careful not to  
expose it to heat or direct sunlight.  
1
Carefully lift up the guide feed and gently  
remove jammed paper. After removing  
jammed paper, flip down the guide feed.  
2
Replace the print cartridge and close the  
top cover. Printing will resume.  
3
1.18  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.19  
T R O U B L E S H O O T I N G  
Clearing Paper Jams in  
the Output Area  
If the paper is almost completely visible,  
gently pull paper to remove.  
1
2
If the jammed paper is not visible or there  
is resistance when you pull the paper, open  
the rear cover. Detach the vinyl strip and  
press the rear cover down until the plastic  
clips of the tray snap out.  
EN  
FR  
ES  
PT  
ZH  
Note: Please detach the vinyl strap prior  
to pushing down the rear cover.  
If there is still resistance when you try to  
remove the paper, pinch the Handle and  
release the exit roller.  
3
Handle  
U s e r G u i d e  
1.19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.20  
T R O U B L E S H O O T I N G  
Gently remove the jammed paper. Refer to  
“Clearing Paper Jams Inside the Printer” if  
unable to remove the paper.  
4
5
Replace and secure the exit roller and  
reattach the vinyl strap. Close the rear cover.  
Open and close the top cover to resume  
printing.  
Clearing Paper Jams in  
the Input Area  
Pull out the paper tray.  
1
2
3
Gently remove jammed paper.  
Slide the tray back into the printer. Open  
and close the top cover to resume printing.  
1.20  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.21  
I N S T A L L I N G O P T I O N A L M E M O R Y  
Installing Optional Memory  
Note: For users who plan to run complex  
print jobs or print a majority of print jobs  
at 1200dpi, a minumum of 8MB of  
additional memory is recommended.  
Memory needs to be purchased separately.  
(RAM Specifications: 72 pin, EDO, non-  
parity: 60ns.)  
Caution: The controller board and internal  
options are sensitive to static electricity.  
Before installing or removing an internal  
option, discharge static electricity from your  
body by touching something metal, such as a  
metal plate on a device connected to a  
grounded outlet.  
Go to the back of the printer. Turn the  
printer off and disconnect the power cord  
and printer cable.  
1
2
Remove the two outer screws and the  
control board cover.  
EN  
FR  
ES  
PT  
ZH  
Install the memory SIMM, at a slight angle,  
into the slot labeled “DRAM Module”.  
3
U s e r G u i d e  
1.21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.22  
I N S T A L L I N G O P T I O N A L M E M O R Y  
Push back on the SIMM until it clicks into  
place. (Make sure the SIMM is secured in  
place by the metal clips.)  
4
Replace the side cover and tighten the two  
outer screws.  
5
Reconnect the power cord and printer cable.  
Turn the power on.  
6
7
Print a configuration sheet (hold down the  
print button until all lights blink, then  
release). Confirm the new memory value  
on your sheet.  
1.22  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.23  
G E T T I N G M O R E I N F O R M A T I O N  
Detailed information for your DocuPrint  
P1210 is in the electronic Reference Guide,  
which is available on the product CD  
provided with your printer. The Reference  
Guide is provided in the following  
languages: English (EN), French (FR),  
Italian (IT), German (DE), Spanish (ES),  
Portuguese (PT), Dutch (NL), Russian  
(RO), and Simplified Chinese (ZH).  
CD Contents  
• Software Utilities  
• Print Drivers  
• Reference Guide (found in the folder  
labeled Docs)  
The Windows PCL6 driver provided with  
your printer has many specialized print  
features, like Watermarks and multiple-up  
printing. To learn more about these features,  
please access the on-line Help available  
through the Xerox DocuPrint P1210 PCL6  
driver. To access the on-line help, just click  
the ‘Help’ button located on the lower right  
hand corner of the driver window. For  
Macintosh users, information concerning  
print driver features can be found in the  
Reference Guide located on the P1210 CD.  
– Print Media Specifications  
– Configuring the PCL Driver  
– Setting Properties  
– Driver Features  
– Using Printer Utilities  
– Solving Printing Problems  
EN  
FR  
ES  
PT  
ZH  
Drivers are available on our website. Please  
Drivers and Utilities."  
For support and service, refer to your  
warranty pack for local contacts. Additional  
information can be found at www.xerox.com.  
U s e r G u i d e  
1.23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.24  
P R I N T E R C E R T I F I C A T I O N S  
Laser Safety  
The Xerox DocuPrint P1210 complies with safety standards, and is certified as a Class 1 Laser product under the U.S.  
Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control  
for Health and Safety Act of 1968. The printer does not emit hazardous laser radiation.The use of controls, adjustments,  
or procedures other than those specified in the documentation might result in hazardous exposure to  
laser light.  
(European Union) Declaration of Conformance  
The CE marking applied to this product symbolizes Xerox Ltd. Declaration of Conformity with the following applicable  
Directives of the European Union as of the dates indicated:  
January 1, 1995: Council Directive 73/23/EC amended by Council Directive 93/68/EC, on the harmonization of the laws  
of the Member States related to equipment designated for use within certain voltage limits.  
January 1, 1996: Council Directive 89/336/ED, approximation of the laws of the member states related to electromagnetic  
compatibility. When applicable  
March 9, 1999; Council Directive 99/5/EC, on the harmonization of the laws of the Member States related to radio and  
telecommunications terminal equipment.  
A full declaration, defining the relevant Directives and referenced standards can be obtained from your Xerox Ltd.  
representative.  
WARNING: Changes or modifications to this equipment not specifically approved by Xerox Europe may void the users  
authority to operate this equipment.Shielded cables must be used with this equipment to maintain compliance with the  
EMC Directive (89/336/EEC).  
WARNING: In order to allow this equipment to operate in proximity to Industrial, Scientific and Medical (ISM)  
equipment, the external radiation from ISM equipment may have to be limited or special mitigation measures taken.  
Australia and New Zealand  
Changes or modifications to this equipment not specifically approved by Fuji Xerox Australia Pty. Limited may void the  
users authority to operate this equipment. Shielded cables must be used with this equipment to maintain compliance with  
the Radiocommunications Act 1992.  
Radio Frequency Emissions  
United States and Canada  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications to this equipment not specially approved by Xerox Corporation may void the authority granted  
by the FCC to operate this equipment. Shielded cables must be used with this equipment to maintain compliance with  
FCC regulations.In order to allow this equipment to operate in proximity to Industrial, Scientific and Medical (ISM)  
equipment, the external radiation from ISM equipment may have to be limited or special migration measures taken.  
1.24  
U s e r G u i d e  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P1210UG-8 6/30/00 3:59 PM Page 1.25  
L A N G U A G E C O D E S  
Language Codes  
Code  
(XX)  
Language  
BG  
CS  
DA  
DE  
EL  
EN  
ES  
ET  
FI  
Bulgarian  
Czech†  
Danish†  
German*  
Greek  
English*  
Spanish*  
Estonian  
Finnish†  
French*  
FR  
HE  
HU  
IT  
Hebrew  
Hungarian†  
Italian*  
LT  
Lithuanian  
Latvian  
EN  
FR  
ES  
PT  
ZH  
LV  
NL  
NO  
PL  
PT  
RO  
RU  
SH  
SK  
SL  
SV  
TR  
ZH  
Dutch†  
Norwegian†  
Polish†  
Portuguese*  
Romanian†  
Russian†  
Croatian  
Slovakian  
Slovenian  
Swedish†  
Turkish  
Chinese†  
* Macintosh and Windows print drivers available.  
Windows print driver available  
U s e r G u i d e  
1.25  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weslo Home Gym WLEX28080 User Manual
Weslo Treadmill WLTL11094 User Manual
Westinghouse Landscape Lighting W 019 User Manual
Whirlpool Oven RM770PXB User Manual
Whirlpool Range 8SF302PSY User Manual
Whirlpool Washer Compact Washe User Manual
Xerox Printer 230ST User Manual
Yamaha Musical Instrument CBX K3 User Manual
Zanussi Cooktop 200101 User Manual
Zebra Technologies Printer 105SL Plus User Manual