Wintal DVR PVR10 User Manual

USER MANUAL

v1.0

Download from Www.Somanuals.com. All Manuals Search And Download.

SyMBolS on the receIver

Part 1: warnIng Mark

This mark appears on rear panel of this receiver, painted prominently in

contrasting colour to background. It consists of two graphical symbols and

warning messages. The detailed speciﬁcations are as follows:

Warning: To reduce the risk of electric shock, don’t remove the cover

(or back). Equipment service and maintenance should be undertaken by

qualiﬁed personnel.

SHOCK HAZARD: DO NOT OPEN

RISQUE DE CHOC: NE PAS ENLEVER

This symbol alerts user to the presence of uninsulated “dangerous voltage”

in product enclosure that sufﬁcient magnitude will constitute risk to person.

This symbol reminds user of presence of important operation and

maintenance instructions in literature accompanying this receiver.

Part 2: other MarkS

This mark appears on front panel of this receiver, painted prominently in contrasting colour to background.

dolBy

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Please note: As software updates are issued to your PVR10HD, some parts of this manual may not reﬂect the

complete operation of your unit. Screenshots used may not represent what actually shows on your screen, and

there may be features added that are not mentioned in this manual. We therefore recommend that you check the

Wintal web site www.wintal.com.au in case there might be an updated manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

contentS

1. Before Using YoUr PVr10HD

1.1 IN thE Box

1.2 MAIN FEAtURE

1.3 FRoNt PANEL

1.4 REAR PANEL

1.5 REMotE CoNtRoL

1.5.2 REMOTE CONTROL - GENERAL KEYS

1.5.3 REMOTE CONTROL - PVR KEYS

1.5.4 REMOTE CONTROL - LEARNING KEYS

2. installation

2.1 CoNNECtING to YoUR tV

2.1.1 TV CONNECTION - HDMI

2.1.2 tV CoNNECtIoN - COMPONENT

2.1.3 tV CoNNECtIoN - S-VIDEO

2.1.4 tV CoNNECtIoN - COMPOSITE AV

2.2 ExtERNAL CoNNECtIoNS

2.2.1 ExTERNAL AV IN

2.2.2 CONNECTING TO OTHER DEVICES

2.3 PowER oN

2.4 SEARCh ChANNEL

3. Basic oPeration

3.1 SwItChING ChANNELS

3.2 VoLUME CoNtRoL

3.3 ChANNEL INFoRMAtIoN BAR

3.4 ChANNEL LISt

3.4.1 FAVOURITE CHANNEL LIST

3.5 AUdIo SEttING

3.6 tELEtExt

3.7 CLoSEd CAPtIoNS

3.8 PICtURE-IN-PICtURE (PIP)

3.8.1 ACTIVATE PIP

3.8.2 SHOW/ HIDE PIP WINDOW

3.8.3 SWAP PIP WINDOW

3.8.4 CHANGE POSITION OF PIP

3.8.5 SWITCH PIP MAIN CHANNEL

3.9 USING thE oN-SCREEN kEYBoARd

4. Personal ViDeo recorDing (PVr) featUres

4.1 BEFoRE YoU BEGIN

4.2 SEt StoRAGE dEVICE

4.3 PVR SEttINGS

4.3.1 SCHEDULE START/STOP TIME OFFSET

4.3.2 REMIND BEFORE SCHEDULE START

4.3.3 PVR ICON TIME OUT

4.3.4 MANUAL RECORDING DURATION

4.3.5 TIME-SHIFT START MODE

4.4 QUICk RECoRdING

4.4.1 START RECORDING

4.4.2 STOP RECORDING

4.5 SChEdULE RECoRdING

4.5.1 ADD SCHEDULE

4.5.2 MODIFY SCHEDULE

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

4.5.3 DELETE SCHEDULE

4.6 oPERAtIoN whILE RECoRdING

4.6.1 VIEW/ MODIFY RECORDING INFORMATION

4.6.2 SWITCHING CHANNELS WHILE RECORDING

4.6.3 PLAYBACK CURRENT PROGRAM

4.7 PLAYBACk PRE-RECoRdEd FILES

4.7.1 PAUSE

4.7.2 REWIND/ FAST FORWARD

4.7.3 SLOW FORWARD

4.7.4 PLAYBACK PROGRESS BAR

4.7.5 SKIP BACK/ SKIP FORWARD

4.7.6 BOOKMARKS

4.7.7 FILE EDITING (FILE CUT)

4.7.8 STOP PLAYBACK

4.8 FILE oPERAtIoNS

4.8.1 DELETE RECORDED FILES

4.8.2 GROUP RECORDED FILES

4.8.3 RENAME RECORDED FILE

4.8.4 LOCK RECORDED FILE

4.8.5 COPY FILE

4.9 tIME-ShIFt

5. UsB PlaYBacK

5.1 MP3 PLAYBACk

5.2 dIGItAL PhotoS

6. storage DeVice ManageMent

6.1 FoRMAt StoRAGE dEVICE

6.2 UNMoUNt USB dEVICE

7. tV gUiDe/ electronic PrograMMe gUiDe (ePg)

7.1 VIEw EPG INFoRMAtIoN

7.2 SChEdULE VIA EPG

8. cHannel searcH

8.1 MUx EdIt

8.1.1 ADD A TRANSPONDER

8.2 AUto SEARCh

8.3 MANUAL SEARCh

8.4 ChANNEL INFoRMAtIoN

9. eDit cHannel

9.1 LoCk ChANNEL

9.2 MoVE ChANNEL

9.3 dELEtE ChANNEL

9.4 EdIt FAVoURItES

10. settings

10.1 GENERAL SEttINGS

10.2 ChANGE PASSwoRd

10.3 PG LoCk (PARENtAL GUIdANCE)

10.4 NEtwoRk SEttINGS

10.5 FACtoRY RESEt

10.6 SoFtwARE UPdAtE

10.7 SYStEM INFoRMAtIoN

11. aPPenDix

11.1 tRoUBLEShootING

11.2 SPECIFICAtIoN

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Before uSIng your Pvr10hd

1.1 In the Box

Once you have unpacked your PVR10HD, please ensure that the following has been included:

1. rf cross over lead

2. composite av lead

3. 12v dc power supply

4. remote control

Switch between operation and standby modes

Receive infrared remote control signal

Display status

Open the cover to reveal the front USB port

Pull down from the right edge to open cover

5. 2x ‘aaa’ batteries

6. customer care info sheet

1.2 MaIn feature

▪ 500GB Personal Video Recorder

▪ Time shift supported

▪ Dolby 5.1 supported

▪ Support automatic and manual search

▪ Powerful channel editing function

▪ Parental control supported

▪ PIP supported

▪ Software upgrade supported

▪ MP3 playing and photo browse

▪ Teletext/Closed Caption supported

▪ EPG supported

▪ Standby with low power consumption

▪ HDMI output: support 1080p/1080i/720p/576p

▪ S/P DIF audio supported

▪ Favourite channel groups

▪ USB 2.0 interface supported

1.3 front Panel

label

function

1. Stand By

2/3. ch-/+

4. SenSor

5. dISPlay

6. front uSB

7. front cover

Switch between operation and standby modes

Switch channels or move cursor down/up

Receive infrared remote control signal

Display status

Open the cover to reveal the front USB port

Pull down from the right edge to open cover

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

1.4 rear Panel

11 13 14 15 16 17 18

10 12

21 22

label

function

1. ant In 1

Connect to your terrestrial antenna

Loop out RF signal to ANT IN 2 using the included cross over RF lead

2. looP out 1

3. ant In 2

Input RF signal from LOOP OUT 1 using the included cross over RF lead

Loop out RF signal to another receiver and/ or VCR

Connect to the internet

4. looP out 2

5. ethernet

6-7-8. y Pb Pr

9. cvBS

Component video oUtPUt (supports high deﬁnition video output)

CVBS (composite) video oUtPUt

10-11. l-r

Stereo Left and Right audio oUtPUt

12. S-vIdeo

13-14-15. InPut 1

16-17-18. InPut 2

19. uSB

Y/C (S-VHS) video signal oUtPUt

Composite Audio/ Video signal INPUt from external source

Rear USB port INPUt for JPG photos, MP3 music

HDMI high deﬁnition video oUtPUt

20. hdMI

21. S/P dIf

22. 12v 3.0a

23. rS-232

24. on/ off

(Sony/ Philips Digital Interface) Digital Audio oUtPUt to ampliﬁer/ AV receiver

DC power supply

Serial port for ﬁrmware upgrades

Power switch

1.5 reMote control

Insert the “AAA” batteries provided before using your remote control. Please make sure you observe the correct

polarity when inserting batteries.

Download from Www.Somanuals.com. All Manuals Search And Download.

1.5.2 reMote control - general keyS

Button

label

function

Switches the PVR10HD between on and

stand-by

Pvr Power

Mute

audIo

Mute/ Unmute audio

Displays the AUDIO SELECT window

0 - 9

Switch channels or input numbers

text/ P+

cc/ P-

Display Teletext Information/ Page Up

Turn Closed Captions On or Off/ Page Down

recall

Info

Back to previously viewed channel

Displays the channel information bar

Switch channel up/ move cursor up

Switch channel down/ move cursor down

Lower volume/ move cursor left

vol

Increase volume/ move cursor right

vol

Displays channel list/ Conﬁrm operation

Display/ Exit from main menu

ePg

fav

Displays EPG (Electronic Programme Guide)

Displays the favourites channel list

exIt

Back to previous menu/ Exit from operation

PIP

Displays the PIP (Picture-In-Picture) window

Swaps PIP window with main screen

Change position of PIP window

P.SwaP

P.Move

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

1.5.3 reMote control - Pvr keyS

Button

label

function

hdd lISt

Displays the recorded ﬁle list

fIrSt

Skip backwards during playback

Set Mark Set a bookmark during playback

Play and jump to next bookmark during

playback

Play Mark

end

Skip forward during playback

Start playback/ Resume normal playback

speed

Play

PauSe

StoP

record

rew

Pause playback/ Initiate time shift

Stop playback/ Stop recording

Record current program/ Display recording

information

Rewind (2x, 4x, 8x, 16x, 32x speed)

Fast Forward (2x, 4x, 8x, 16x, 32x speed)

Slow motion (1/2x, 1/4x, 1/8x speed)

Slow

tIMer

record

Display schedule list window

Please note: Some keys may behave differently based on current operation and/ or what is displayed on the

screen. If required, please refer to the instructions on-screen to determine what key needs to be pressed to

complete an operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

1.5.4 reMote control - learnIng keyS

The PVR10HD’s remote control has learning keys located on the

top left corner. These keys (except for the SET key) can be used to

memorize corresponding keys from an existing remote, such as your

TV or AV receiver.

With this feature you could easily turn your TV on and off, and adjust

the volume of your AV receiver using the PVR10HD’s remote control

without having to touch the remote for your TV or AV receiver.

Instructions on how to pair your Pvr10hd remote with your

existing tv remote:

Please note: The basic principle outlined in the following instructions apply to other

devices as well.

1. Press and hold the Set key on the PVR10HD remote for a few

seconds until the TV POWER button lights up bright red.

2. Press one of the four learning keys (such as TV POWER key).

The red led indicator will be ﬂashing rapidly.

3. Aim your existing TV remote control at the “receiving window”

of the PVR10HD remote, and press the corresponding key

on your TV remote (such as TV POWER key) to learn. The

indicator status changes from ﬂashing to always bright, which

means the learning process has completed successfully.

4. Repeat steps 2 and 3 to set other learning keys C1 (Custom

1), C2 (Custom 2) and TV/AV in the same way.

REMOTE

5. Once you’ve completed your set up press the Set key to exit.

If the operation fails, please repeat the steps above and try again.

notes:

▪ During the pairing process, put the two remote controls on the

same horizontal surface and ensure there is a 5cm or less space

between the two remotes.

▪ If there is no activity for 15 seconds, your PVR10HD remote will

automatically exit from learning mode

5cm

distance

Learning

Eye

PVR

POWER

TV POWER

MUTE

ABC

AUDIO

DEF

TV/AV

QZ-

▪ Some TV remotes may not support this function.

GHI

JKL

MNO

SET

TEXT

PRS

TUV

WXY

P+

RECALL

INFO

P-

VOL

HDD

LIST

PIP

P.SWAP

P.MOVE

END

FIRST

SET MARK PLAY MARK

PLAY

PAUSE

STOP

RECORD

REW

SLOW

TIMER

RECORD

PVR10HD

REMOTE

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

2. InStallatIon

Before you turn on your PVR10HD, please connect your TV and other devices ﬁrst.

If you wish to watch and record two channels simultaneously you will need to make sure that you have

connected the LOOP OUT 1 output with the ANT IN 2 input using the supplied cross over RF cable!

2.1 connectIng to your tv

There are four ways to connect the PVR10HD to your TV.

2.1.1 tV CoNNECtIoN - hdMI

HDMI offers the best quality connection between your TV and PVR using a single digital cable to transmit audio

and video.

Power Supply

Use cross over

RF cable to

connect Loop Out

1 and ANT IN 2

RF CABLE

HDMI CABLE

▪ Use an RF cable to connect the TV antenna to the ANt IN 1 input on the PVR10HD.

▪ Using an HDMI lead, connect one end to the hdMI output on the PVR10HD and the other end to the HDMI

input on your TV.

▪ Switch to the HDMI source on your TV (refer to your TV manual if needed)

Download from Www.Somanuals.com. All Manuals Search And Download.

2.1.2 tV CoNNECtIoN - coMPonent

Power Supply

RF CABLE

YPbPr CABLE

RCA CABLE

COMPONENT INPUT

AUDIO

▪ Use an RF cable to connect the TV antenna to the ANt IN 1 input on the PVR10HD.

▪ Using a 3x RCA component lead, connect the green Y , the blue Pb and the red Pr connectors to the

corresponding ports on your PVR10HD and TV.

▪ For audio, using a 2x RCA lead, connect the left channel audio (WHITE) and the right channel audio (RED)

connectors to the L and R ports on your PVR10HD (next to the Y Pb Pr output ports) and the other end to

the corresponding ports on your TV.

▪ Switch to the Component source on your TV (refer to your TV manual if needed)

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

2.1.3 tV CoNNECtIoN - S-vIdeo

Power Supply

RF CABLE

RCA CABLE

S-VIDEO CABLE

AUDIO

S-VIDEO

▪ Use an RF cable to connect the TV antenna to the ANt IN 1 input on the PVR10HD.

▪ Using an S-VIDEO (S-VHS) lead, connect one end to the S-VIDEO output on your PVR10HD and the other

end to the S-VIDEO input on your TV.

▪ For audio, using a 2x RCA lead, connect the left channel audio (WHITE) and the right channel audio (RED)

connectors to the L and R ports on your PVR10HD (next to the Y Pb Pr output ports) and the other end to

the corresponding ports on your TV.

▪ Switch to the S-VIDEO (sometimes called S-VHS, YuV) source on your TV (refer to your TV manual if needed)

Download from Www.Somanuals.com. All Manuals Search And Download.

2.1.4 tV CoNNECtIoN - coMPoSIte av

Use the included AV lead to make a connection between your TV and the PVR10HD.

Power Supply

RF CABLE

RCA CABLE

AV INPUT

▪ Use an RF cable to connect the TV antenna to the ANt IN 1 input on the PVR10HD.

▪ For video, connect the yellow end of the Composite AV lead to the CVBS input on the back of your PVR10HD

and to the VIDEO input on your TV.

▪ For audio, connect the left channel audio (WHITE) and the right channel audio (RED) connectors to the L and

R ports on your PVR10HD (just below the CVBS output) and the other end to the corresponding ports on your

TV.

▪ Switch to the VIDEO (sometimes called VIDEO 1, CVBS) source on your TV (refer to your TV manual if

needed)

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

2.2 external connectIonS

2.2.1 external av In

Your PVR10HD features two rear AV inputs that allow you to hook up any external AV source such as, another set

top box, DVD player, Blu-ray player etc.

You can view your external video sources directly from the channel list and choose to record to the internal hard

drive or an external hard drive attached via USB.

See the following diagram for connection options.

Power Supply

AV OUTPUT

RCA CABLE

AV INPUT

Download from Www.Somanuals.com. All Manuals Search And Download.

2.2.2 connectIng to other devIceS

Your PVR10HD is able to connect to a variety of devices.

CABLE

Power Supply

RCA CABLE

S/P DIFF

CABLE

RF CABLE

HDMI CABLE

Please note:

ethernet Port

The ethernet port located on your PVR10HD will allow it to receive MHEG-5 broadcasts once it becomes

available in Australia. We have included this to make your PVR10HD as future proof as possible.

MHEG-5 provides interactive/hybrid services beyond broadcast TV and also allows for EPG data to be

transmitted via the internet.

uSB Port

The PVR10HD accepts USB ﬂash drives, 2.5” portable HDDs, 3.5” HDDs as well as card readers connected via

the front and/ or rear USB ports. Refer to section 5. “USB Playback” on page 33 for more information.

If you are having problems with connecting USB devices, please ensure that your drives are formatted as FAT32.

Your PVR10HD can playback JPG photos and MP3 audio via USB, and can also record to your USB devices.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

2.3 Power on

Once you have completed all required connections, you may power on your PVR10HD.

▪ Connect one end of the power supply to the 12V 3A input

▪ Connect the other end of the power supply to the wall outlet

on the PVR10HD

▪ Turn on your TV and switch it to the mode you have connected your PVR10HD to (ie. HDMI)

▪ Turn on your PVR10HD and wait for the system to initialise.

note: ^{Make sure the PVR10HD is switched on at the back.}

2.4 Search channel

Once system initialization is complete, you should perform a channel search, if there is no channel stored in the

receiver. For more information on searching, please refer to section 8. “Channel Search” on page 37.

If there are pre-stored channels on your PVR10HD it will be displayed automatically with the channel number and

if available, channel name displayed on the front panel.

3. BaSIc oPeratIon

This section explains the basic operation and various features of your PVR10HD.

3.1 SwItchIng channelS

There are a number of ways to switch channels:

▪ channel up and channel down

Using the channel up

the PVR10HD remote

and channel down

buttons on

▪ numeric keypad

Directly entering the channel number on the remote using the number keys

▪ channel list

Selecting a channel via the Channel list (press the OK button

See section 3.4 for more information.

on your remote)

▪ favourites list

Select a channel via the Favourite Channels list.

If you have pre-selected favourite channels, press the FAV key and press OK after having made a selection

with the

and

keys.

See section 3.4 for more information on how to set up favourite channels.

3.2 voluMe control

Press the volume down

or volume up

keys to change the volume.

Download from Www.Somanuals.com. All Manuals Search And Download.

3.3 channel InforMatIon Bar

The Channel Information bar displays basic and extended information on the currently watched program.

▪ Press the Info key once to display the current channel information

▪ Press the info key twice to display current program information

Note: Switching channels will also bring up the channel information bar.

[Channel Information Bar]

Detailed information of current program

Channel number and name

Current and next program information

Current audio mode

Audio decoding standard

Current time

Standard/ High Deﬁnition mode icon

3.4 channel lISt

The Channel list window allows you to quickly and easily browse the available channels. It also allows you to set

your favourite channels.

▪ Press the OK key

on your remote to

bring up the channel list.

▪ Use

to switch between

different list types (Channel list/ Favourites)

▪ Use the

select individual channels

▪ Press the P+ and P- buttons to page up or page down

and

buttons to

▪ Press the

key to conﬁrm your selection

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

3.4.1 favourIte channel lISt

The favourites menu feature allows you to easily access your favourite and frequently watched channels. Press

the FAV key on your remote to bring up the favourites list.

To add or remote channels from your favourite list:

▪ Press the

to bring up the channel list

▪ Locate the channel you want to add to favourites using the

and

buttons

▪ Press the FAV key

You can conﬁrm the operation if a heart

has appeared next to the channel name.

Follow the above steps if you would like to remove a channel from your favourites list.

3.5 audIo SettIng

1. Press AUDIO

key to display audio

selection dialogue

2. Press the

and

keys to

select an audio language and press

to conﬁrm

key

3. Press

stereo mode

4. Press the EXIT key to save and exit

to select left, right or

Note: The currently streaming program must contain multiple audio tracks to be able to change the audio language.

3.6 teletext

Teletext works as an electronic newspaper in which you can browse multiple pages of information, such as

news, trafﬁc, stock, weather, etc.

1. Press TEXT key to display Teletext

information.

2. The ﬁrst page shows the index. Browse

to your desired page by entering its page

number using the numeric keypad on your

remote. In the example on the right, keying

300 on your remote will take you to the

WEATHER page.

3. Press the EXIT key to hide the Teletext

information.

Note: This function needs your local operator support.

Download from Www.Somanuals.com. All Manuals Search And Download.

3.7 cloSed caPtIonS

Closed Captions is an option to display text that provides additional or interpretive information no the currently

streaming program.

If you have set closed captions to “On” under General Setup, you can press the CC key on your remote to turn

closed captions on or off.

Note: This function needs your local operator support.

3.8 PIcture-In-PIcture (PIP)

PIP allows the display of two channels simultaneously. It is a useful feature where you may want to visually see

whether a program has returned from an ad break, or if you want to keep an eye out on a sports game while

watching another show.

3.8.1 actIvate PIP

Before you can use the PIP function you must enable it in the settings.

Select MEnu  SEttINGS  GENERAL SEttINGS and press the

key to enter.

1. Highlight “PIP” and press the

key to pop

up a drop-down list.

2. Select “On” and press the

key to

conﬁrm.

3. Press the EXIT key and a message box

pops up for conﬁrmation.

4. Select “OK” and press the

key to

conﬁrm, and a reboot prompt pops up on-

screen.

5. Select “OK” and press

key to reboot or

select “ExIT” and press OK key to cancel the operation.

Notes:

▪

This function is unavailable when certain screens are activated on the PVR10HD, such as the channel list screen, detailed information

window, etc. Just exit out to the main screen and try again.

▪

You can also press PIP key and activate PIP function when not in any menus.

After making a change, please ensure you reboot the unit to have the PIP On or Off settings take effect.

IMPortant: PIP is not supported through Composite AV (CVBS) and S-VIDEO. Please make sure you connect via Component

or HDMI if you wish to use this feature.

If you have previously enabled PIP and connect your PVR10HD via composite or s-video, there will be no video output. If this is the

case, connect the receiver to a HDTV via YPbPr or HDMI and disable PIP following the instructions above.

3.8.2 Show/ hIde PIP wIndow

Press the PIP

key on your PVR10HD remote to show or hide the PIP window.

3.8.3 SwaP PIP wIndow

Press the P.SWAP

key to switch the main window with the PIP window and vice versa.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

3.8.4 change PoSItIon of PIP

Each time you press the P.MOVE

key, the PIP window changes position.

3.8.5 SwItch PIP MaIn channel

Follow the instructions to change the main channel while PIP is active.

1. Press the

to display the channel list window.

2. Use the

and

keys to select a channel

3. Press the

again to conﬁrm.

3.9 uSIng the on-Screen keyBoard

Your PVR10HD features an on-screen keyboard

that you will wish to use from time to time when

renaming ﬁles, groups etc.

Use the following guide to familiarise yourself

with the keyboard.

1. To select characters, use the directional keys

on your remote

2. Press the

key to input the selected characters

3. clear: Will clear the input ﬁeld completely allowing you to start over.

caPS on/ off: Toggles between capital and lowercase letters.

Back: Backspace key to delete the last character

ok: Conﬁrm keyboard entry

cancel: Cancel name change

To enter a space, highlight the blank box and press

Download from Www.Somanuals.com. All Manuals Search And Download.

4. PerSonal vIdeo recordIng (Pvr) featureS

You can record programs on to the integrated hard drive or to an attached USB device. Your PVR10HD provides

a number of handy PVR functions such as one-touch quick recording, schedule recording, time shift and more.

4.1 Before you BegIn

▪ Radio programs cannot be recorded.

▪ For ideal performance, the capacity of the attached USB device should not be less than 8GB and should be

high speed USB2.0 or greater.

▪ If space on your storage device is insufﬁcient, recording will stop automatically.

▪ Do not unplug the USB device while a recording is in place.

▪ Make sure you “Unmount USB” before unplugging your USB drive from the PVR10HD. For detailed

instructions please refer to 6.2 “Unmount USB Device” on page 35.

4.2 Set Storage devIce

Select the storage device to store your recordings.

Press the MEnu key and navigate to SEttINGS

 StoRAGE dEVICE and press

key to enter.

1. Press the

and

keys to

select a storage device.

2. Press the

key to pop up a drop-down

list.

3. Select dEFAULt StoRAGE and press the

key to conﬁrm.

4. Press the EXIT key to save and exit.

note:

You can also select MEnu  PVR  StoRAGE dEVICE and press the

key to enter. Select a storage device and press the

key to conﬁrm.

4.3 Pvr SettIngS

If you don’t set any recording options, your

PVR10HD will record based on default settings.

To customize the recording settings, select

MEnu  PVR  PVR SEttING and press

key to enter.

4.3.1 Schedule Start/StoP tIMe offSet

This feature allows you to decrease or increase

the start time of scheduled recordings. This

allows you to compensate for programs not starting at their pre-announced time.

For example, if scheduled start time for a particular show is “13:00” and the Schedule Start Time Offset has

been set to “-4 Min”, the recording will begin at 12:56.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

Press the

keys to select a time from -10 to +30 minutes.

Options are: -10m/ -8m/ -6m/ -4m/ -2m/ 0m/ 2m/ 4m/ 6m/ 8m/ 10m/ 30 minutes

4.3.2 reMInd Before Schedule Start

Before a scheduled recording is about to commence, you will receive a pop up window notifying the start of

recording. You can either turn this feature off, or change how many minutes prior to the start of a pre-scheduled

recording you’d like to be notiﬁed.

Press the

keys to make your selection.

Options are: OFF/ 30s/ 60s/ 90s/ 120 seconds

4.3.3 Pvr Icon tIMe out

Sets the on-screen duration of the PVR icon which displays the recording information on the top left hand corner

of the screen.

Press the

keys to make your selection.

Options are: ALWAYS/ 5s/ 10s/ 30s/ 60 seconds

If “Always” is selected, the PVR icon is displayed on-screen all through the recording.

4.3.4 Manual recordIng duratIon

Set the default recording duration for the one-touch recording feature pressing the rECOrd

button on

your remote.

Press the

keys to make your selection.

Options are: 1h/ 2h/ 3h/ 4h/ 8h/ 12h/ 16h/ 24 hours

4.3.5 tIMe-ShIft Start Mode

Set time shift start mode.

Press the

keys to make your selection.

Options are: Always/ Never/ Pause Key

always: Time Shift is always on. When you start watching a channel, the PVR10HD will automatically begin

recording in the background.

Pause key: Start time shift with the PAuSE

key. While watching live tv, this option will pause the

current program and start time-shift recording in the background.

never: Disable time shift.

note:

For detailed operations about time shift, please refer to section 4.9 “Time-Shift” on page 32.

Download from Www.Somanuals.com. All Manuals Search And Download.

4.4 QuIck recordIng

If you want to record current program instantly, you can use this function.

4.4.1 Start recordIng

When watching program, press the rECOrd

key to start recording.

is displayed in top left corner

of screen indicating that a recording has begun.

To record a program from another channel, switch to your desired channel while a current recording is in

progress and press the rECOrd key again.

4.4.2 StoP recordIng

After pressing the STOP

key when

recording, a list of currently ongoing recordings

will appear on-screen.

Select a recording and press the

stop.

key to

note: If you are playing back a pre-recorded program while

recording, pressing the STOP key will stop playback. To stop

recording, press the STOP key again.

4.5 Schedule recordIng

You can schedule to record future programs and at the set date and time, your PVR10HD will start recording

automatically. You can modify schedules and delete unwanted schedules.

To view and edit your scheduled recording list, select MEnu  PVR  SChEdULE LISt and press

key.

Alternatively, you can press the TIMEr rECOrd

key to access the scheduled recording list when

there’s no menu item on the screen.

note: You can schedule recordings directly in the EPG (Electronic Programme Guide) window. For detailed operations, please refer to section

7.2 “Schedule via EPG” on page 37.

4.5.1 add Schedule

1. Once in the SChEdULE LISt menu, press the

key directly to display add schedule

window.

note: ^{If there is an existing schedule stored on your}

PVR10HD, press

to bring up a drop-down list,

select Add and press

window.

to display the add schedule

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

2. Set schedule parameters as follows:

Schedule type: Press the

keys to select REC or PLAY .

Start time: Press the nuMbEr kEyS to

set your schedule start date and time, or

press

to display the calendar window.

Set your desired schedule start date and time

according to screen information.

end time: Press nuMbEr kEyS to input end time.

Schedule Mode: Press

keys to select oNCE , dAILY or wEEkLY . If “Weekly” is selected, press

to pop up the weekly window. Select one or more days with the

and

keys and press

to conﬁrm. Highlight ok and press the key one last time to save and exit.

channel name: Press

press key to conﬁrm.

to display channel list, select a channel with the

to save the new schedule.

and

keys and

3. Move cursor to ok and press

4.5.2 ModIfy Schedule

1. To modify an existing scheduled recording, make sure you are in the SChEdULE LISt menu and use the

and

keys to select the scheduled item you wish to modify.

2. Press the

key to bring up a menu from which you can choose ModIFY . Press

again to enter the edit

menu.

3. Refer to the previous section on how to adjust the scheduled recording.

4.5.3 delete Schedule

1. To delete an existing scheduled recording,

make sure you are in the SChEdULE LISt

menu and use the

and

keys to select the scheduled item you wish

to delete.

2. Press the

key to bring up a menu from

which you can choose dELEtE . Press

to conﬁrm and you will notice a red cross

indicating that the item has been marked for deletion.

If you would like to undo at this point, just press

on the same item and choose CANCEL dEL .

Download from Www.Somanuals.com. All Manuals Search And Download.

3. To conﬁrm your choices, press the EXIT key choose ok when prompted to delete the items that have been

ﬂagged.

note: ^{You can also choose to Delete All which will ﬂag all the items in your scheduled list for deletion.}

4.6 oPeratIon whIle recordIng

4.6.1 vIew/ ModIfy recordIng InforMatIon

While recording a program, you can view recording information, rename ﬁles and modify recording duration if

needed.

Select MEnu  PVR  RECoRdING INFo and press the

key.

Alternatively, if you are watching the program

that is currently being recorded, you can bring up

the Record Info screen by pressing the

rECOrd

key.

The following explains the different options:

Index: Press

to select R1

(Recording 1) or R2 (Recording 2) if active.

Mode: Displays the recording mode (Schedule or Quick; indicating whether it’s a pre-scheduled recording or a

one-touch recording).

channel name: Displays the channel name that is currently being recorded.

file name: You can rename the ﬁle if needed. Press

to pop up the on-screen keyboard and rename the ﬁle

as desired. For detailed instructions on how to use the on-screen keyboard, please refer to section 3.9 “Using

the On-screen Keyboard” on page 21.

valid record time: Displays the valid record time. Valid recording dismisses signal lost and will display the

actual duration of successful recording.

Past time: Displays how long the recording has been going for.

duration: Press the

key to adjust the recording duration in minutes. Press and hold the keys to

adjust the time in big jumps.

Pause: Select “Pause” and press

ok: Select “OK” and press

to pause recording. Select “Resume” to continue the recording.

to conﬁrm your changes.

cancel: Select “Cancel” and press

key to cancel your changes.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

4.6.2 SwItchIng channelS whIle recordIng

Because your PVR10HD has twin tuners, you are able to record two channels from two separate transponders

(such as Channel 9 and Channel 10). At the same time, you are also able to watch a third sub-channel for

Channel 9 or Channel 10 live.

For example, if you are recording Channel 9, and Channel 10 simultaneously, then you are able to watch a third

sub-channel from either the Channel 9 transponder, or the Channel 10 transponder (ie. you can watch ONEHD or

Channel 9’s GO! channel) but not SBS or channel 7 etc.

To see which channels you are able to switch to while two simultaneous recordings are going on, with nothing

displayed on the screen, press the

button to bring up the channel list. You will automatically be shown the

Filtered List which in the above example would display the sub-channels for 9 and 10 only.

If you attempt to switch to another channel from a third transponder, you will see a This operation is not available

message.

note: ^{You must stop at least one recording if you wish to watch another channel from a different transponder.}

4.6.3 PlayBack current PrograM

You can start playing back the current program during recording. For detailed operations, please refer to section

4.9 “Time-Shift” on page 32.

4.7 PlayBack Pre-recorded fIleS

To playback a pre-recorded ﬁle located on your

hard drive, press MEnu  REC FILES and

press

Alternatively, with no menu or dialogue box

showing on-screen, press the

your remote.

key on

This brings up the Recorded Files list where you

can browse and select pre-recorded ﬁles from

the internal HDD or external USB drives. If present, you can also playback the currently recording ﬁles which are

indicated in red text. To playback a ﬁle:

1. Press the

2. Press

3. Select PLAY and press

and

to bring up a pop-up dialogue

to start playback.

keys to choose your ﬁle.

Here are your options during playback;

4.7.1 PauSe

To pause playback, press the PAuSE

key. To resume playback press the PLAy

key // to fast forward playback use the FF

key.

4.7.2 rewInd/ faSt forward

To rewind playback use the rEW

key

Download from Www.Somanuals.com. All Manuals Search And Download.

Speed settings are: x2 - x4 - x8 - x16 - x32

Resume normal playback with the PLAy

4.7.3 Slow forward

key.

Press the SLOW

key to activate slow motion. Speed settings are: x1/2 - x1/4 - x1/8

Resume normal playback with the PLAy

key.

4.7.4 PlayBack ProgreSS Bar

If you press the PLAy

key or the InFO key during playback, you can bring up the playback progress

bar.

1. File Name

4. Time bar

2. Current progress (hh:mm:ss)

3. Operation help info

5. Total playback time

4.7.5 SkIP Back/ SkIP forward

This feature allows you to easily skip through a long recording in a very short amount of time.

1. Press the INFO key to display the progress bar

2. Press the FIrST

or End

key to skip back or forward in playback.

note: You can also skip back or forward in one minute intervals using the

keys during playback.

4.7.6 BookMarkS

You can jump to a position directly by bookmark

function while playing back a pre-recorded ﬁle.

This feature allows you to easily tag important

bits of a recording or resume playback from a

previous viewing.

add Bookmark

1. During playback, press the InFO key to

display the progress bar.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

2. Press the green SET MArk

key to add a bookmark at this point.

Note: You can set up to 20 bookmarks per recorded ﬁle.

go to Bookmark

1. During playback, press the InFO key to display the progress bar.

2. Press the yellow PLAy MArk

key to jump to the next bookmark on the progress bar. Press the

PLAY MARK key again to jump through the available bookmarks (identiﬁed by the

icon).

delete Bookmark

1. During playback, press the InFO key to display the progress bar.

2. Press the PLAy MArk

key to jump to the desired bookmark.

key to remove the bookmark.

3. Press the green SET MArk

4.7.7 fIle edItIng (fIle cut)

You can cut out certain parts of your pre-recorded ﬁles. This is an ideal solution to get rid of ads, or to cut out

unwanted sections in a recording.

1. During playback, press the InFO key to display the progress bar.

2. Press

3. Mark a start point by pressing the SET MArk

MArk key.

to complete the operation. A message box pops up for conﬁrmation.

to enter ﬁle cut mode.

key and mark your end point by pressing the PLAy

4. Press

5. Select ok and press the

key to conﬁrm or select CANCEL and press the

key to cancel.

4.7.8 StoP PlayBack

To manually stop playback press the STOP

key.

4.8 fIle oPeratIonS

You can perform various operations on pre-recorded ﬁles such as

▪ Play

▪ Copy

▪ Delete

▪ Lock

▪ Group

▪ Rename

To bring up the ﬁle operation menu, ﬁrst enter the RECoRdEd FILES list by pressing MEnu  REC FILES and

press . Alternatively press the key on your remote.

Download from Www.Somanuals.com. All Manuals Search And Download.

4.8.1 delete recorded fIleS

1. In the recorded ﬁles list use the

and

keys to choose your ﬁle.

2. Press

to bring up a pop-up dialogue box

3. Select dELEtE and press

4. You will notice a red cross indicating that

the item has been marked for deletion.

If you would like to undo at this point, just

press

on the same item and choose

CANCEL dEL .

5. To conﬁrm your choices, press the EXIT key choose ok when prompted to delete the items that have been

ﬂagged.

4.8.2 grouP recorded fIleS

The group feature allows you to easily categorize

your recordings and is ideal, for example, when

you’d like to put a particular TV show under its

own listing.

Once you have set up your groups, it will appear

on the left hand column in the Recorded Files

list.

create a group

Before you can use the group feature you will have to create a group.

1. In the recorded ﬁles list use the

2. Press to bring up a pop-up dialogue box

3. Select GRoUPMGR from the list and press

4. Press the green SET MArk key to create a new group

and

keys to choose your ﬁle.

5. Give your new group a name by using the on-screen keyboard (refer to section 3.9 “Using the On-screen

Keyboard” on page 21 for more information on using the keyboard)

6. When done, highlight OK on the on-screen keyboard and press

7. You will see your newly created group in the Group Edit window

to conﬁrm the operation

8. Follow steps 4-7 to add more groups otherwise, if you want to add to the group you just created, make sure

the group is highlighted on the screen and press

9. The icon next to your group name will change from

indicating that your ﬁle has been added.

note: ^{A single recording can belong to multiple groups. Just select your desired group(s) and press}

to add or remove it.

add to a group

Follow steps 8 and 9 to add a ﬁle to an existing group

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

delete a group

With the Group Edit window on-screen, press the

FIrST

key to delete a group. Select

ok on the warning dialogue box and press

to conﬁrm your operation.

rename a group

Choose the group you wish to rename in the

Group Edit window and press the PLAy MArk

key to bring up the on-screen keyboard. Refer to the instructions in section 3.9 “Using the On-screen

Keyboard” on page 21 for more information on how to use the on-screen keyboard.

When done renaming, highlight ok on the on-screen keyboard and press

to conﬁrm the operation.

4.8.3 renaMe recorded fIle

1. In the recorded ﬁles list use the

and

keys to choose your ﬁle.

2. Press

to bring up a pop-up dialogue box.

3. Select RENAME and press

to bring up

the on-screen keyboard.

Refer to the instructions in section 3.9 “Using

the On-screen Keyboard” on page 21 for

more information on how to use the on-

screen keyboard.

4. When done renaming, highlight ok on the on-screen keyboard and press

to conﬁrm the operation.

note: ^{There is a 15 character limit (including spaces) on names you can enter in the input ﬁeld. Your PVR10HD will automatically accept ﬁle}

names longer than 15 characters if the original recorded show name exceeds this limit, but you will not able to add to this.

4.8.4 lock recorded fIle

Locking a ﬁle will prevent accidentally deleting a

recording that wasn’t intended to be deleted.

It will also prevent local playback unless the user

enters the local password (The default password

is 0000).

It’s an ideal solution to make sure you don’t lose

any recordings you wish to keep and protect

children from inappropriate content.

Download from Www.Somanuals.com. All Manuals Search And Download.

To lock a recorded ﬁle:

1. In the recorded ﬁles list use the

and

keys to choose your ﬁle.

2. Press

to bring up a pop-up dialogue box.

3. Select LoCk and press

4. You will notice a lock symbol

indicating that the ﬁle has been marked for locking. If you would like to undo

just press

on the same item and choose lock again. You will be prompted to enter the local password.

5. Press the EXIT key to save and exit.

4.8.5 coPy fIle

You can copy ﬁles between the internal hard

drive and attached USB storage devices as

well as between two USB storage devices

connected to the front and rear USB ports of your

PVR10HD.

1. In the recorded ﬁles list use the

and

keys to choose your ﬁle.

2. Press

to bring up a pop-up dialogue box.

3. Select CoPY FILE and press

4. Choose the available copy destination from the list

5. Select ok to conﬁrm or select CANCEL and press the

key to cancel the copy operation.

4.9 tIMe-ShIft

Your PVR10HD features a very handy time-shift function. And depending on your settings, time-shift records in

the background and allows you to pause and rewind live TV. The internal hard drive allocates space for up to an

hour of continuous time-shift recording.

note: ^{For time-shift settings, please refer to section 4.3.5 “Time-shift Start Mode” on page 23.}

By default, your PVR10HD has been set to “ALWAYS” record in the background. This lets you pause/play, rewind

and fast forward (pre-recorded) live TV. In summary, time-shift allows you to treat live TV as a pre-recorded ﬁle.

For detailed information on how to control playback, please refer to section 4.7 “Playback Pre-Recorded Files”

on page 27.

You can also press the InFO key to display the time-shift progress bar. It displays current channel information

and playback progress.

1. Channel Name

4. Time bar

2. Total time (hh:mm:ss)

3. Operation help info

5. Playback progress

To stop playback of the time-shift recording and resume live TV, just press the STOP

key.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

5. uSB PlayBack

Your PVR10HD is able to playback MP3 audio ﬁles and JPG photos from attached USB devices.

notes:

▪

Your USB device should be connected to your PVR10HD before operation

Do not abruptly unplug your USB device during playback!

▪

You should unmount your USB device before unplugging it from the PVR10HD. Please refer to section 6.2 “Unmount USB”

5.1 MP3 PlayBack

Insert a USB drive that contains MP3 audio ﬁles

to either the front or rear USB port.

Select MEnu  MULtIMEdIA  MP3 and

press the

key.

1. Use the

and

keys to

choose your ﬁle.

2. Press to start music playback. You can

pause and resume playback using the key.

notes:

▪ Press the FAV key to switch between SINGLE PLAY | SEQUENCE PLAY | RANdoM PLAY

▪

SINGLE PLAY: Repeats the currently playing song

SEQUENCE PLAY: Plays the songs in listed order

RANdoM PLAY: Plays songs in random order

▪ Use the

keys to adjust the playback volume.

5.2 dIgItal PhotoS

Insert a USB drive that contains photos to either

the front or rear USB port.

Select MEnu  MULtIMEdIA  dIGItAL Photo

and press the

key.

1. Use the directional keys to select a thumbnail

2. Press

to display the selected photo in full screen

3. Press the

keys to skip to the previous or next photo

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Press the

key to bring up the SLIdEShow and ExIt menu.

to begin the slideshow.

to exit full screen mode and return to thumbnail view. Alternatively, press the

With SLIdEShow highlighted press

Highlight ExIt and press

EXIT key on your remote.

6. Storage devIce ManageMent

6.1 forMat Storage devIce

IMPortant: formatting your storage device will result in deleting all ﬁles.

Please take care when choosing this option and make sure you back up any important data. Please refer to section 4.8.5 “COPY

FILES” on how to copy and back up ﬁles between from the internal hard drive to an external HDD.

Select MEnu  PVR  FoRMAt and press the

key.

1. With StoRAGE dEVICE highlighted press

or the

key to pop up a drop-down list of available storage

devices that can be formatted.

2. Use the

3. Use to

and

keys to select the storage device you wish to format and press

to get to the password prompt.

key to highlight ok and press

4. Enter the local password (default password is 0000) to conﬁrm.

Alternatively, you can also select MEnu 

SEtUP  StoRAGE dEVICE and press the

key.

1. Enter the local password (default password is

0000) to conﬁrm.

2. Use the

and

keys to select

the storage device you wish to format and

press

3. Select FoRMAt and press

4. With ok highlighted press

, a warning box pops up for conﬁrmation.

to complete the format operation. There will not password conﬁrmation once

you press

as you’ve already entered the password to enter this screen in the ﬁrst place.

note: In this screen you can verify free and used space for your storage device.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

6.2 unMount uSB devIce

IMPortant: always make sure you unmount your uSB device before unplugging it!

Failure to do so may result in corrupt data, damage your USB device, or cause your PVR10HD to behave abnormally.

Select MEnu  PVR  UNMoUNt USB and press the

key.

1. The right hand column lists your currently attached USB devices. If you have more than one USB device

attached, use the

key to bring up a pop-up menu to choose the USB drive you wish to unmount.

key to highlight ok and press

2. If you have only one USB device attached, you can use the

3. A conﬁrmation window will pop up, choose ok to conﬁrm, or ExIt to cancel the operation.

Alternatively, you can also select MEnu 

SEtUP  StoRAGE dEVICE and press the

key.

1. Enter the local password (default password is

0000) to conﬁrm.

2. Use the

and

keys to select

the USB storage device you wish to unmount

and press

3. Select UNMoUNt USB and press

4. With ok highlighted press

, a warning box pops up for conﬁrmation.

to complete the format operation. There will not password conﬁrmation once

you press

as you’ve already entered the password to enter this screen in the ﬁrst place.

note: In this screen you can verify free and used space for your storage device. You will not see the UNMOUNT USB option for the Internal

HDD.

Download from Www.Somanuals.com. All Manuals Search And Download.

7. tv guIde/ electronIc PrograMMe guIde (ePg)

The built-in EPG functionality provides continuously updated scheduling information for current and upcoming

programming from all the available channels. You can view up to a weeks worth of programming via the EPG

menu as long as this information has been broadcast by he broadcaster.

To enter the EPG screen,

Select MEnu  EPG and press the

key.

Alternatively just press the EPG key on your remote when in non-menu mode.

7.1 vIew ePg InforMatIon

The EPG window:

1. Channel list

2. Preview window

3. Current time

4. Date table

5. Program list

6. Operation help info

Press the EPG key to toggle

between the channel list and program list.

In channel list:

▪ Use the

EPG information for the highlighted channel appears in the program list window

▪ Press to view the selected channel in full screen.

and

keys to select your channel

In program list:

▪ Use the

keys to select the days of the week

keys to select the program

and

▪ Press the InFO key for detailed information on selected program

▪ Press

to play the selected program in full screen or to schedule for a future viewing/ recording

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

7.2 Schedule vIa ePg

You can easily schedule TV shows to be recorded

or played back in advance.

▪ While in the program list window, use the

and

show you wish to record.

▪ Press to bring up the EPG SChEdULE

keys to highlight the

window.

▪ From here you can choose to RECORD or

PLAY the selected show, either once, daily, or weekly.

Refer to section 4.5.1 add Schedule on page 24 for more information about the schedule options.

▪ Once you have conﬁrmed your action you will notice a

to record or play the selected program.

(RECORD) or (PLAY) icon based on your choice

▪ Press the EXIT key to save and exit.

note: Based on your reminder settings, your PVR10HD may remind you prior to recording or switching to the chosen scheduled program.

See section 4.3.2 REMIND BEFORE SCHEDULE START on page 23.

8. channel Search

IMPortant: do not switch off your Pvr10hd while a channel search is in progress.

8.1 Mux edIt

the Mux edIt is for advanced users only. More often than not, you will not need to adjust any

settings in this window.

In Mux edit window you will ﬁnd preset transponders (TPs) and their related parameters. You can add, modify

and delete TPs.

To enter the EPG screen,

Select MEnu  ChANNEL  MUx EdIt and press the

key.

8.1.1 add a tranSPonder

1. Press OK to bring up a pop up menu

2. Select “Add”

3. Input the Frequency (KHz) using the numeric

keypad and choose the required bandwidth

from the list.

4. ExIT out to save your selection

You can also modify and delete transponders

from this screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

8.2 auto Search

For most applications, AUTO SEARCH is the best

option to quickly set up your PVR10HD.

Select MEnu  ChANNEL  AUto SEARCh

and press the

key.

As soon as you press the OK key your, PVR10HD

will automatically begin to search for all available

HD and SD digital channels as well as available

radio channels.

Once channel scan has completed the PVR10HD will exit from the AUTO SEARCH screen and display the ﬁrst

available channel in full screen.

8.3 Manual Search

If auto search is not ﬁnding a particular channel

and you know the frequency and bandwidth

details, then you may enter them in the Manual

Search window.

Select MEnu  ChANNEL  MANUAL SEARCh

and press the

key.

1. Use the

key to move down to the

Frequency (KHz) ﬁeld and input the numbers

using the numeric keypad on the remote.

2. When done, use the

key again to move down to the Bandwidth (M) ﬁeld. Press

and choose the

appropriate bandwidth from the pop up menu.

3. Scroll down to the SEARCh tYPE ﬁeld and choose either SINGLE or NEtwoRk .

4. Move up to BEGIN SEARCh at the top of the window and press

to begin the search.

Once the search is complete you will be notiﬁed on-screen whether any channels were found.

8.4 channel InforMatIon

Select MEnu  ChANNEL  ChANNEL INFo

This window displays information about current channel,

such as PID values, frequency, bandwidth, signal level and

signal quality. This information could be helpful to identify

and solve reception issues.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

9. edIt channel

The channel editing functionality in your PVR10HD makes it easy to organise the vast number of available

channels by allowing you to lock, move, delete and favourite channels.

To enter the channel edit menu,

Select MEnu  ChANNEL  ChANNEL EdIt and press the

key.

Enter the local password if prompted (The default password is 0000)

9.1 lock channel

1. Use the

and

keys to select

the channel you wish to lock

2. Use

key to bring up the edit menu

3. Select LoCk and press

This will mark the channel with a

symbol

(Once you’ve chosen Lock from the edit

menu, you can now mark multiple channels

using the

4. Press

key.)

again if you want to cancel the lock operation

5. Press the EXIT key twice to exit out of the channel edit menu and press

ok option highlighted to conﬁrm your changes.

with the

note: ^{The local password is required to view programs of the locked channels.}

9.2 Move channel

1. Use the

and

keys to select

the channel you wish to move

2. Use

key to bring up the edit menu

3. Select MoVE and press

This will mark the channel with a

4. Use the and keys to move

the channel into a new position

5. Press to lock the channel in position

symbol

6. Press the EXIT key twice to exit out of the channel edit menu and press

ok option highlighted to conﬁrm your changes.

with the

Download from Www.Somanuals.com. All Manuals Search And Download.

To continue moving channels, just press

to mark the channel with the

symbol and follow the instructions

from 4-5 above.

9.3 delete channel

1. Use the

and

keys to select

the channel you wish to delete

2. Use

key to bring up the edit menu

3. Select dELEtE and press

This will mark the channel with a symbol

(Once you’ve chosen Delete from the edit

menu, you can now mark multiple channels

using the

key.)

4. Press the EXIT key twice to exit out of the channel edit menu and press

ok option highlighted to conﬁrm your changes.

with the

note: ^{You will have to re-scan for channels that have been deleted. Refer to 8.2 Auto Search on page 38 for more information on how to}

automatically scan channels. If you wish to delete all channels before you run a auto scan, you can do so by choosing dELEtE ALL at step 3

above.

9.4 edIt favourIteS

1. Use the

and

keys to select

the channel you wish to add to favourites

2. Use

key to bring up the edit menu

3. Select FAVoURItE and press

This will mark the channel with a

symbol

(Once you’ve chosen Favourites from the edit

menu, you can now mark multiple channels using the

key.)

4. Press the EXIT key twice to exit out of the channel edit menu and press

ok option highlighted to conﬁrm your changes.

with the

note: ^{Refer to section 3.4.1 Favourite Channel List on page 19 for more information about Channel Favourites}

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

10. SettIngS

To enter the settings screen, select MEnu  SEttINGS and press the

key.

10.1 general SettIngS

Use the

and

keys to select

the setting you would like to change. Pressing

will bring up the options available for your

selection.

EXIT to save your changes.

note: Bold items are the default values.

ASPECt RAtIo : The aspect ratio depends how the picture ﬁts on your TV.

Options are:

1. Pan and Scan 4:3

2. Letterbox 4:3

3. Default 4:3

4. Pan & Scan 16:9

5. Letterbox 16:9

6. default 16:9

RESoLUtIoN :

1. 576p

2. 720p 50Hz

3. 720p 60Hz

4. 1080i 50hz

5. 1080i 60Hz

6. 1080p 50Hz

7. 1080p 60Hz

note: Ensure that you select the correct resolution for your TV. Refer to your TV’s manual if in doubt. Should you choose a wrong resolution

and the screen goes black, wait for 10 seconds without pressing any buttons and your PVR10HD will revert to the previous working resolution.

tIME ZoNE SEt :

1. vIc

2. NSW/ ACT

3. QLD

4. SA

5.WA

6. TAS

7. NT

CLoSEd CAPtIoN : Closed captions are available only if it is being streamed by the broadcaster.

See section 3.7 “Closed Captions” on page 20 for more information.

1. On

2. off

dAYLIGht SAVING tIME : Set it to on if you are observing DST.

1. On 2. off

MENU tRANSPARENCY : Set the opacity for the on-screen menu,

1. High 2. Middle 3. Low

4. default

AUdIo dECodE : Sets the audio output via the rear S/PDIF port. If your AV receiver can decode Dolby Digital

signals set it to “Dolby Digital”. If not, set it to “PCM” to output the decoded signal.

1. dolby digital

2. PCM

note: Dolby Digital surround sound is only available if it is streamed by the broadcaster.

PIP : Enable or disable Picture-in-Picture. For more information on PIP, please refer to section 3.8 Picture-in-

Picture (PIP) on page 20.

1. On

2. off

Download from Www.Somanuals.com. All Manuals Search And Download.

10.2 change PaSSword

IMPortant: the default password is 0000. for security reasons, it is highly

recommended that you change this.

MEnu  SEttINGS  ChANGE PASSwoRd and press the

key.

The local password is required to change certain

settings, view and edit locked channels etc.

Input your existing password using the numeric

keypad on your remote under existing

Password.

Enter your new password in the Input new

Password and enter the same password in

new Password again.

10.3 Pg lock (PARENtAL GUIdANCE)

MEnu  SEttINGS  PG LoCk and press the

key.

Parental controls allow you to restrict

programming based on their classiﬁcation.

The default setting has Parental Guidance turned

off. Enter the local password and choose your

restriction level if you wish to enable this feature.

Options are:

▪ P - Pre-school

▪ c - Children

▪ Pg - Parental Guidance

▪ r - Restricted 18+

Once activated, any show that has a classiﬁcation higher than what is chosen will be blocked from viewing. For

example, if you select Pg above, shows that have a rating above PG will be locked from viewing.

You will have to input the local password to be able to view content that has been locked.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

10.4 network SettIngS

MEnu  SEttINGS  NEtwoRk and press the

key.

The ethernet port located on your PVR10HD will

allow it to receive MHEG-5 broadcasts once it

becomes available in Australia. We have included

this to make your PVR10HD as future proof as

possible.

MHEG-5 provides interactive/hybrid services

beyond broadcast TV and also allows for EPG

data to be transmitted via the internet.

The default DHCP IP mode setting will

automatically conﬁgure your PVR10HD based

on your existing network settings. However, if required, you may choose StAtIC and enter the necessary

information.

10.5 factory reSet

warnIng: factory reset will revert all settings back to factory defaults and erase

all channels. Beware when choosing this option!

MEnu  SEttINGS  FACtoRY RESEt

Press the

key and input the local password

(The default password is 0000).

Use the

key.

key to highlight ok and press the

Wait for the reset operation to complete. Your PVR10HD will prompt you to do a channel scan once it’s done.

Conﬁrm it to initiate an auto channel search.

Download from Www.Somanuals.com. All Manuals Search And Download.

10.6 Software uPdate

warnIng: Make sure you do not abruptly switch off power to your Pvr10hd during

the upgrade process as this may harm your unit.

MEnu  SEttINGS  SoFtwARE UPdAtE

Press the

key and input the local password

(The default password is 0000).

You can upgrade your PVR10HD via the front or

back USB ports or via the RS-232 port.

For USB upgrades, make sure you have

downloaded the ﬁrmware ﬁle to the root of your

ﬂash drive.

Press OK to initiate the upgrade process.

You will receive an on-screen prompt once the

upgrade process is complete and your PVR10HD will reboot itself.

10.7 SySteM InforMatIon

MEnu  SEttINGS  SYStEM INFo

This window displays information speciﬁc to your PVR10HD such as hardware version, software version and

more.

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

11. aPPendIx

11.1 trouBleShootIng

dISPlay on front Panel IS off

1. Power adapter is disconnected. Make sure power adapter is plugged into a proper power socket.

2. The receiver is turned off. Turn it on.

dISPlay on front Panel IS on, But no Sound and PIcture on tv Screen

The receiver is in stand-by mode. Press PVR POWER key on your remote to turn it on.

no SIgnal

1. Antenna cable is not conected. Make sure that there’s a connection between your aerial and the PVR10HD.

2. You haven’t performed a channel scan. See section 8. Channel Search on page 37.

no Sound

1. Audio cable is disconnected or incorrectly connected. See 2.1 “Connecting to your TV” on page 11.

2. The receiver is in mute mode. Press MUTE key on remote to restore sound.

3. Volume is set to minimum. Increase volume to a proper level using the remote.

4. Audio settings are incorrect. See section 3.5 “Audio Setting” on page 19 or “Audio Decode” under General

Settings in on page 41.

no PIcture

1. Video cable is disconnected or incorrectly connected. See 2.1 “Connecting to your TV” on page 11.

2. The receiver is in radio mode. Switch to TV mode if you need.

3. Your TV is not set to AV mode.

vIdeo and audIo MISMatch, or Sound out of Sync

Audio settings are incorrect. See section 3.5 “Audio Setting” on page 19 or “Audio Decode” under General

Settings in on page 41.

Poor QualIty PIcture

Weak signal. Ensure proper connection between your aerial and PVR10HD.

reMote control doeSn’t work

1. Flat batteries. Replace the batteries.

2. Remote is not aimed at the receiver. Aim remote at the receiver.

cannot record PrograM

1. Not enough space on your internal and/ or external HDDs. Delete ﬁles and create space on the hard drives.

2. There’s a conﬂict with the current recording. Stop current recording or wait until the recording is ﬁnished.

cannot oPerate tIMe ShIft

1. “Time-shift Start Mode” is set to “Never”. See section 4.3.5 on page 23.

2. The capacity of attached USB drive is less than 8GB.

note: If you cannot solve the problems after referring to this trouble shooting, please contact us on

1800 337 366.

Download from Www.Somanuals.com. All Manuals Search And Download.

11.2 SPecIfIcatIon

tuner

Input frequency

loop out frequency

Input level

47 ~ 858MHz

-25 ~ 20dBuV

6M, 7M, 8M

75Ω

Bandwidth

Input Impedance

channel decodIng

Standard

DMB-T EN300 744

demodulation

audIo decodIng

Standard

QPSK, 16 and 64QAM

ISO/IEC 13818-3

decoding

MPEG-1 & MPEG-2 layer I and II, AC3

Left, Right and Stereo

audio Mode

vIdeo decodIng

ISO/IEC 13818-2, MPEG-2 MP@ML,

MPEG-4 AVC/ H.264 HP@L4

Standard

aspect ratio

4:3, 16:9

resolution

1920 × 1080p max.

hIgh defInItIon outPut

output format

1080p, 1080i, 720p

HDMI, Y/Pb/Pr

output connector

Power SuPPly

Input voltage

12 V 3A DC

PhySIcal characterIStIcS

Size

320mm (L) × 223mm (W) × 40mm (H)

weight

1.4kg

operation temperature

Storage temperature

Storage humidity

0° ~ 40° C

-40° ~ 60° C

≤93%

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

CUSTOMER

CARE CENTRE

THIS PRODUCT IS WARRANTED FOR 12 MONTHS FROM THE DATE OF PURCHASE.

Subject to the conditions of this warranty, the Customer Care Centre will perform

necessary service on the product without charge for parts, or labour if, in the

opinion of the manufacturer/ manufacturer’s agent, the product is found to be

faulty within the warranty period.

This warranty only applies if the product has been installed and used in accordance

with the manufacturer’s recommendations (as noted in the operating instructions)

under normal use and reasonable care. The warranty covers normal domestic use

only and does not cover damage, malfunction or failure resulting from use of

incorrect voltage, accident, misuse, neglect, build-up of dirt or dust, abuse, mis-

adjustment of customer controls, mains supply problems, thunderstorm activity,

infestation by insects or vermin, tampering or repair by unauthorised persons

(including unauthorised alterations), exposure to abnormally corrosive conditions

or any foreign object or matter having entered the product.

If warranty service is required you should:



Telephone the Customer Care Centre on 1300 662 946



Provide a copy of your purchase receipt that shows retailers identity and date

of purchase.



Send or bring the product to your Customer Care Centre. Please note that freight

to and/or from your Customer Care Centre must be arranged by you.

The warranties hereby conferred do not extend to any costs associated with the

delivery, handling, freighting or transportation of the product or any part thereof

or replacement of and do not extend to any damage or loss occurring during, or

associated with transit.

THIS WARRANTY CARD AND THE PURCHASE DOCKET

(OR SIMILAR PROOF OF PURCHASE)

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

TROUBLE SHOOTING HELP LINE

1300 662 946

Customer Care Centre

562 Spencer Street, West Melbourne

VICTORIA 3003

Download from Www.Somanuals.com. All Manuals Search And Download.

WINTAL PVR10HD USER MANUAL

Weil McLain Boiler GOLD CGs User Manual
Westinghouse Flat Panel Television TX 42F810G User Manual
Westinghouse Landscape Lighting W 164 User Manual
Whirlpool Freezer 26 User Manual
White Rodgers Thermostat 1F86 344 User Manual
Whynter Frozen Dessert Maker IC 2L User Manual
Woods Equipment Compact Loader 118470 User Manual
Yale Personal Lift Series Y80 User Manual
Zanussi Microwave Oven ME965 User Manual
Zanussi Microwave Oven MW500 User Manual