Winegard TV Antenna SS 1000 User Manual

90 DAY LIMITED WARRANTY  
Winegard Company warrants this Winegard product against any defects in materials  
or workmanship within 90 (ninety) days from date of purchase. No warranty claim will be  
honored unless at the time the claim is made, you present proof of purchase to an authorized  
Winegard dealer (if unknown, please contact Winegard Company, 3000 Kirkwood Street,  
Burlington, IA 52601-2000, Telephone 800-288-8094).  
Model SS-2000 AMPLIFIED DIRECTIONAL ANTENNA  
Model SS-1000 NON-AMPLIFIED DIRECTIONAL ANTENNA  
Made in USA  
Winegard Company (at its option) will either repair or replace the defective product at  
no charge to you. This warranty covers parts, but does not cover any costs incurred in  
removal, shipping or reinstallation of the product. This limited warranty does not apply if the  
product is damaged, deteriorates, malfunctions or fails from: misuse, improper installation,  
abuse, neglect, accident, tampering, modification of the product as originally manufactured  
by Winegard, usage not in accordance with product instructions or acts of nature such as  
damage caused by wind, lightning, ice or corrosive environments such as salt spray and acid  
rain.  
GENERAL RECEPTION GUIDELINES  
ANALOG  
DIGITAL  
The 90 Day Warranty is provided on the condition that the equipment is properly delivered  
with all handling and freight charges prepaid to your Winegard dealer for return to our factory  
for repair or replacement. Winegard dealers will arrange for the replacement or repair and  
return to you without charge the product which failed due to defective material or  
workmanship.  
UHF Ch. 14-69  
0-45 miles  
0-50 miles  
Choose Amplified Model SS-2000 with built-in  
amplifier when 25 miles or further from station  
or Non-amplified Model SS-1000 for close-in.  
WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER  
WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.  
Patent Pending  
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY IN-  
CLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND  
MERCHANTABILITY ARE LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.  
The  
directional antenna by Winegard is  
The foregoing shall be the sole and exclusive remedy of any person, whether in contract,  
tort or otherwise, and Winegard shall not be liable for incidental or consequential damage  
or commercial loss, or from any other loss or damage except as set forth above.  
designed for high definition (high resolution) digital TV. HDTV (High  
Definition TV) has 10 times more picture detail than analog signals!  
And the  
receives these HDTV signals at  
Some states do not allow limitations on how long an implied warranty lasts, or the  
exclusion of limitation of incidental or consequential damages, so the above limitations or  
exclusions may not apply to you.  
greater distances! For example — Analog range is 45 miles; Digital  
range is 50 miles.  
This warranty gives you specific legal rights and you may also have other rights which vary  
With HDTV, advantages include more detailed pictures, high quality  
sound, plus there’s no “snow” or weak signal area with this technology.  
You receive a perfect picture on your TV, or no picture at all.  
from state to state.  
Rev. 2/08  
The  
has exceptional reception character-  
istics for UHF channels 14-69.  
WARNING  
Installation of this antenna near power lines is  
dangerous. For your safety, follow these instal-  
lation instructions!  
Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000  
2452031  
Printed in U.S.A. © 2004 Winegard Company  
Rev. 11/07  
Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 • 319/754-0600  
8
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
AMPLIFIED MODEL SS-2000 ONLY  
Attaching Downlead Cable  
Antenna  
Lead-in Wire  
Ground Clamp  
If using the Power Injector, follow these steps.  
STEP 6. Attach the cable coming from your preamp or amplified  
antenna to the jack on the PS-1503 Power Injector marked “Ant”.  
See Figure 4.  
Electrical  
Service  
Equipment  
Antenna Discharge Unit  
(NEC Section 810-21)  
EXAMPLE OF ANTENNA  
GROUNDING IN  
ACCORDANCE WITH THE  
NATIONAL ELECTRICAL CODE  
INSTRUCTIONS  
Grounding Conductors  
(NEC Section 810-21)  
STEP 7. Attach the cable from your TV set or Distribution Sys-  
tem to jack on Power Injector marked “TV”. See Figure 4.  
Ground Clamps  
Power Service Grounding  
Electrode System  
(NEC Art. 250, Part N)  
STEP 8. Attach supplied 6’ cable between AC Power Adapter  
and jack on Power Injector marked “Pwr In”. See Figure 4.  
NEC - NATIONAL ELECTRICAL CODE  
19. When replacement parts are required, be sure  
theservicetechnicianhasusedreplacementparts  
specified by the manufacturer or have the same  
characteristics as the original part. Improper sub-  
stitutions may result in fire, electric shock or other  
hazards.  
15. Do not overload wall outlets and extension cords  
as this can result in a risk of fire or electric shock.  
STEP 9. Insert AC Power Adaptor into 117 VAC wall outlet.  
16. Never push objects of any kind into this video  
product through openings as they may touch danger-  
ous voltage points or short-out parts that could result  
in a fire or electric shock. Never spill liquid of any kind  
on the video product.  
CAUTION:  
No splitters or antenna couplers should be installed in the  
coax line between the antenna and the power supply.  
20. Upon completion of any service or repairs to  
this video product, ask the service technician to  
perform safety checks to determine that the video  
product is in proper operating condition.  
17. Do not attempt to service this video product  
yourself as opening or removing covers may expose  
you to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
21. Note to CATV system installer: This reminder  
is provided to call the CATV system installer's  
attention to Art. 820-40 of the NEC that provides  
guidelines for proper grounding and, in particular,  
specifies that the cable ground shall be connected  
to the grounding system of the building, as close  
to the point of cable entry as possible.  
18. Unplug this video product from the wall outlet and  
refer servicing to qualified service personnel under  
the following conditions:  
Figure 4  
TO PREAMP OR  
AMPLIFIED ANTENNA  
a. When the power supply cord or plug is damaged.  
b. If liquid has been spilled or objects have fallen into  
the video product.  
PS-1503  
POWER  
INJECTOR  
22. This product should be mounted to a wall or  
ceiling only as recommended by the manufac-  
turer.  
23. The product should be situated away from  
heat sources such as radiators, heat registers,  
stoves or other products (including amplifiers)  
that produce heat.  
c. If the video product, except for antenna mounted  
preamplifiersanddownconverters, hasbeenexposed  
to rain or water.  
ANT.  
DOWNLEAD  
COAX  
PS-1503  
AC ADAPTOR  
SUPPLIED  
d. If the video product does not operate normally by  
following the operating instructions. Adjust only those  
controls, when provided, that are covered by the  
operating instructions. An improper adjustment of  
other controls may result in damage that will often  
require extensive work by a qualified technician to  
restore the video product to its normal operation.  
TV  
CABLE TO TV OR  
DISTRIBUTION AMP  
(SYSTEM)  
POWER IN  
e. If the video product has been dropped or the  
housing has been damaged.  
LED  
6’ CABLE  
SUPPLIED  
f. When the video product exhibits a distinct change in  
performance - this indicates a need for service.  
6
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting Options  
Assembly  
Figure 2  
Before assembly, determine the best location for HDTV signal reception.  
Point antenna toward station transmitter. To find exact location
STEP 1. Connect coax cable*  
(not provided) to coax con-  
nection on back of antenna.  
*Use RG-6/U coax cable.  
• Exterior wall mount (for masonry walls, you must provide anch
• Roof mount  
• Attic mount • Rail/deck mount  
Another mount option is Winegard’s DS-1000 combina-  
tion mount for satellite dish and Square Shooter antenna.  
This configuration will meet wind specs.  
STEP 2. Attach pipe and foot  
at the location selected for  
the antenna.  
SS-2000 includes: (Amplified)  
Assembled Antenna  
Assembled mount pipe and foot  
SS-1000 includes:  
If you are mounting on a ma-  
sonry surface, you must  
provide your own masonry  
anchors.  
Assembled Antenna  
Assembled mount pipe and foot  
4 #12 x 5/8” plastite screws  
4 #12 x 5/8” plastite screws  
(attach mt. bracket to antenna)  
(attach mt. bracket to antenna)  
2 U-Bolts and hex nuts  
4 lag bolts  
Power Supply  
2 U-Bolts and hex nuts  
4 lag bolts  
If you are mounting on a rail-  
ing, for example, two U-bolts  
are provided for rails, pipes,  
etc. up to 2” in diameter.  
Coax Connection  
Figure 3  
Figure 1  
Swivel Clamp  
Assembly  
STEP 3. Attach swivel  
bracket assembly to back of  
antenna, using screws pro-  
vided (4 #12 x 5/8). Do not  
overtighten.  
Antenna  
(Comes  
assembled)  
Antenna and Mount  
Assembled  
STEP 4. Mount antenna on  
pipe/foot assembly attached  
to selected location surface.  
STEP 5. Attach coax cable to  
mount pipe with weatherproof  
tape or cable ties.  
Elevation  
Bracket  
Mount Pipe  
Clamp  
NON-AMPLIFIED MODEL  
SS-1000 ONLY  
Mount Bracket  
STEP 6. Connect coax cable from an-  
tenna to your HDTV signal or analog  
signal input. The connection depends  
on your TV reception system setup;  
check your component manuals.  
(4) #12 x 5/8” Screws  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  

Whirlpool Air Conditioner 1188177 User Manual
Windsor Vacuum Cleaner Zephyr User Manual
Xyron Laminator FPO User Manual
Yamaha Musical Instrument CLP 260 User Manual
Yamaha Stereo Amplifier A S700 User Manual
Zanussi Oven 237505 User Manual
Zanussi Oven FM 16 User Manual
Zanussi Washer FLE1015W User Manual
Zanussi Washer Z9282T User Manual
Zephyr Ventilation Hood ZSAE30AS User Manual