OW NER’S M ANUAL
Dear Whistler Detector Owner,
If you have questions concerning the operation of
this Whistler product please call:
Model Features Summary ......................... 2 - 3
Installation ................................................ 4 - 5
• Battery Installation
4
5
5
5
• Mounting Guidelines
• Windshield Mounting
• Power Connection and Fuse Replacement
Cu STO m e r Se RVICE
1-8 0 0 -531-0 0 0 4
Monday - Friday • 8:00 am - 5:00 pm CT
or visit our website
Operation ............................................... 6 - 13
XTR-4 4 0
XT R-54 0
• Battery Life
6
6
• Battery Charging
• Power On and Self-Test
• Setting Saver
• Feature Engaged Confirmation
• Audio Level Adjustment
• Auto Quiet Mode
• Quiet Mode
7
7
7
7
7
8
w w w.w h is t le r g ro u p .com
• Teach/ Tutorial Mode
• City/ City 1/ City 2 Mode
• Highway Mode
8
Ba t t e r y Po w e r e d
LASER-RAD AR
DETECTOR
8
Please keep the receipt in a safe place. You may
For warranty verification purposes, a copy of your dated
store receipt must accompany any unit sent in for
warranty work. If the unit is returned without a dated
store receipt, an out of warranty service charge applies.
9
w
h
h
i
i
s
s
t
t
l
l
e
e
r
r
g
g
r
r
o
o
u
u
p
p
..
com.
• Backlight Setting
9
• Low Profile Alert Periscopes
• Compass Calibration
• VG-2 Mode
9
10
10
11
11
12
13
• Auto Shut Off Mode
• Filter Mode
• Option Select Mode
• Stay Alert Feature
Note: Y
Y
o
o
u
u
r
r
w
w
a
a
r
r
r
r
a
a
n
n
t
t
y
y
p
p
e
e
r
r
i
i
o
o
d
d
b
b
e
e
g
g
i
i
n
n
ss
a
a
t
t
t
t
h
h
ee
tt
i
i
m
m
e
e
o
o
ff
Safety Warning System™ ......................... 13
POP™ Mode Alerts ................................. 14
Laser/Radar Alerts ................................. 14
The Whistler Group Corporate Headquarters
3604 NW Frontage Rd. • Bentonville, AR 72712
Tel 479.273.6012 • Fax 479.273.2927
p
p
u
u
rr
cc
h
h
aa
ss
e
e
.
.
T
T
h
h
e
e
w
w
a
a
r
r
r
r
a
a
n
n
t
t
y
y
i
i
s
s
v
v
a
a
l
l
i
i
d
d
a
a
t
t
e
e
d
d
o
o
n
n
l
l
yy
bb
y
y
tt
hh
ee
d
d
aa
tt
ee
dd
s
s
tt
oo
r
r
e
e
r
r
e
e
cc
ee
ii
pp
tt!!
Please record the serial number of the
unit in the space provided in the warranty section of
the manual.
• Speed Radar Audio/ Visual Alerts
• Laser Audio/ Visual Alerts
• Pulse Protection®
14
14
14
Customer Return Center
To fully acquaint yourself with the operation of your
Whistler Detector and to better understand the
differences between detecting radar, laser, and
safety radar signals, we recommend reading this
entire manual or visiting our FAQ page on our
551 N 13th St. • Rogers, AR 72756
VG-2 Alerts ................................................. 15
• Alert Priority 15
Customer Service Tel 800.531.0004
Reset Features ............................................ 16
Troubleshooting Guide .......................... 16 -17
Care and Maintenance ................................ 18
Are Detectors Legal? .................................. 18
FCC Information .......................................... 19
Speed Monitoring ................................. 19 - 22
www.w histlergroup.com
P/ N 260026,
©
2010 The Whistler Group, Inc.
Enjoy your Whistler Detector and please drive safely.
Sincerely,
• Radar Facts
19
19
20-21
21 -22
• POP™ Mode
• Laser Facts/ Tips
• Other Speed Detection Systems
The Whistler Group, Inc.
Warranty Information ............................ 22 - 25
Specifications .............................................. 25
Accessories ................................................. 26
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
OP ERATION
OP ERATION
Power On and Self-Test
Windshield Mounting
Battery Life
•
Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
Each time your Whistler detector is turned on,
an automatic self-test sequence confirms that
the speaker and visual displays are functional.
• Press Power. Display shows in order:
1. X-Band 2. K-Band 3. Ka-Band 4. LASER
5. POP ON 6. VG-2 7. SR 8. BSAV
9. BAT 10. FILTER
The unit can provide approximately 15 hours of
laser/radar detection. There are settings that can
maximize battery life.
1) Display intensity set to Dim
2) Auto Quiet engaged
3) Auto Shut Off set to 1 hour
Rubber Bumper
4) Use a lower volume setting
5) Use Mute whenever possible
Setting Saver
•
Press the suction cups onto the windshield at the
location you have chosen.
Important: The detector’s display will flash and
three fast beeps will sound when the batteries
have approximately one hour of battery life left.
This is a reminder to recharge your batteries.
Setting Saver saves your personalized settings
when the detector is turned off or you lose power.
Windshield
Mounting
Feature Engaged Confirmation
Each time a button is pressed one beep confirms
feature “on”, two beeps confirm feature “off”.
Unit Must Be Level
Battery Charging
•
•
•
Slide the detector onto the bracket until it locks
into place.
Audio Level Adjustment
Power Cord - Plug your included power cord
into the detector and into the lighter socket to
slowly charge the rechargeable batteries. This
will also provide power to the detector. The
display will show an
• Press and hold the “Quiet/VOL” button and the
volume level will increase then proceed to
decrease the volume. Continuing to hold this
button will repeat the sequence. As audio level
is adjusted, beeps are provided and the display
indicates volume level.
If necessary, the unit may be leveled by bending
the windshield bracket.
Press the bracket release button and remove the
detector before bending.
Power Cord Connection
asterisk, i.e.,
when the unit is
•
•
Plug the small end of the power cord into the
unit’s power jack.
charging the batteries. The asterisk will flash
during charging and go out when charging is
complete.
Auto Quiet Mode
Plug the large end into the vehicle’s cigarette
lighter socket.
Auto Quiet reduces the selected audio level to
level (1) approximately 5 seconds after a radar or
safety radar signal is detected. The alert for any
new signal within 20 seconds will resume at level
(1). Auto Quiet does not affect VG-2 or laser alerts.
• Press Quiet/VOL (before a signal is detected)
to engage Auto Quiet.
Note: Cord fits tightly into detector. When installing
When the power cable is removed from the
detector or the vehicle’s lighter socket is
switched off, the unit will alarm and
the cord, expect some resistance.
Fuse Replacement
The lighter socket plug is equipped with a
replaceable 2 amp 3AG fuse located behind the
silver tip. To replace the fuse, carefully unscrew
the tip of the plug.
display
then turn off.
NNoottee:: The unit will continue to charge when powered off
until it senses a full charge.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
IImmppoorrttaanntt:: As with all battery operated devices, remove
the batteries when this unit will not be used for an
extended period of time. Damage caused by leaky or
improperly charged batteries are not covered under
warranty. Check with the battery manufacturer about
their specific product warranty and disposal
recommendations.
Important: Unscrew slowly. The tip contains a spring
which may fly out when disassembling. Insert the new fuse
with the spring and screw on the tip. With use, screw cap
on plug may loosen. Retighten occasionally.
Unscrew the tip of the lighter socket plug
carefully when replacing the 2 amp fuse.
7
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OP ERATION
OP ERATION
OP ERATION
Quiet Mode
Highway Mode
Compass Calibration (XTR-540 only)
The unit needs to be calibrated in order for the
compass to provide accurate headings. To calibrate
the unit, perform the following procedure:
Highway mode provides full audio warnings any
time radar (X, K, Ka, Safety Radar) or laser signals
are detected, and is recommended for open road
driving.
Quiet cancels audio during an alert and any new
alert within 20 seconds. After 20 seconds,
approximately 2 beeps are provided on any new
alert and unit then remains quiet.
1.
Mount the unit level in the center of the
For more information on City and Highway modes, please visit
our FAQ page on our website: www.whistlergroup.com
•
•
Press Quiet to cancel the audio.
vehicle’s windshield. Make sure there are no
magnetic sources near the detector (i.e., speaker).
2. Select a large, clear area (parking lot or field)
without any power lines.
To restore the standard audio alert pattern, press Quiet
a second time during an alert or tun the unit off, then on.
Backlight Setting
The backlighting can be programmed to be
illuminated all the time, only when alarming or
choices in between. The options are selectable by
pressing and holding the Power/BL button on the
unit. The options are:
Teach/Tutorial Mode
3. Press the Menu button until display shows
CAL MODE. Then press the Power/BL and Quiet/Vol
buttons simultaneously. The display shows (scrolling):
Provides simulated alerts for each type of signal.
• Press City and Quiet/VOL simultaneously and release.
• Display Shows:
• Press Power/BL to exit.
OOFFFF--OOFFFF = Backlight is off during normal operation and
off when the unit alarms
City/City 1/City 2 Mode
4
. If calibration does not automatically finish, press the
OOFFFF--DDIIMM = Backlight is off during normal operation and
dim when the unit alarms.
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door
openers, intrusion alarms and other devices which
share frequencies with police radar. Generally, X
band is used for these devices.
Power/BL and Quiet/VOL buttons simultaneously to
complete calibration. The unit will beep twice and
display:
OOFFFF--BBRRTT = Backlight is off during normal operation and
bright when the unit alarms.
DDIIMM--OOFFFF = Backlight is dim during normal operation and
off when the unit alarms.
Important: If the unit mounting is relocated in the
vehicle, (i.e., visor to windshield mounting or dash
mounting), or if the unit is moved to another vehicle,
you must recalibrate the compass.
DDIIMM--DDIIMM = Backlight is dim during normal operation and
dim when the unit alarms.
•
Press City button to cancel Highway Mode
and engage City Mode.
DDIIMM--BBRRTT = Backlight is dim during normal operation and
bright when the unit alarms.
•
•
Press City button again to enter City 1 Mode
Press City button again to enter City 2 Mode
VG-2 Mode
See Option Select Mode to turn this feature
on/off. When a VG-2 signal is detected, the VG-2
alert is sounded and the display flashes “VG-2”.
After 3 seconds, the audio is canceled and the
display no longer flashes. This cycle is repeated
if the VG-2 signal is detected again.
BBRRTT--BBRRTT = Backlight is bright during normal operation and
bright when the unit alarms.
• Press City button a fourth time to cancel City 2
Mode and return the unit to Highway Mode.
Backlight will turn on, if selected, while the unit
alarms and remain on for 3 seconds after the unit
stops alarming. When any button is pressed, the
backlight will illuminate at the dim setting and
remain on for 3 seconds afterwards. The backlight
will also illuminate while in option mode.
In City Mode, weak speed/safety radar signals
give an initial alarm of two beeps, and then
remains quiet unless the signal becomes very
strong. When the signal strength increases, two
additional beeps are provided. City 1 and City 2
Modes operate the same as Highway Mode, but
in City 1 Mode, X band requires a stronger
signal to alert. In City 2 Mode, X-band is not
detected.
During the period a VG-2 signal is detected, a
radar signal cannot be detected. However,
because the VG-2 alert has confirmed that a
patrol car is nearby, you are already aware of the
potential for speed monitoring and can adjust
your speed accordingly. Laser detection is not
affected while a VG-2 signal is detected. (See
page 18 for more information)
Low Profile Alert Periscopes
Whistler’s Low Profile Alert Periscopes provide an
added attention getting visual alert. The two extra
LED’s flash on and off when the unit alarms to
provide a unique visual alert. This alert can be
programmed through the Option Select Mode to
be: ON, OFF, or FLASHING during alerts.
Caution: Some towns/small cities may still be
using X band radar. City Modes do not change
the audio alert for laser or VG-2.
8
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OP ERATION
OP ERATION
OP ERATION
Auto Shut Off Mode
Option Select Mode
Stay Alert Feature
Auto Shut Off Mode automatically shuts off the
detector. The timer is reset:
11.. Each time the detector is turned off
22.. The optional power cord is unplugged
33.. Any button is pressed before the timer has expired.
Entering Option Select Mode allows you to customize
options such as Tone Select, Abbreviated Power Up
Sequence, and VG-2 Mode. Press the Menu button to
enter Option Select Mode. When selecting options,
the Power/BL or Quiet/VOL buttons must be pressed
within 20 seconds or Option Mode will automatically be
The Stay Alert Feature is designed to test a driver’s
alertness. To engage (when unit is not alarming) :
• Press and hold the City button for
approximately 2 seconds. Release button during
or immediately after the alert is given. Display
shows:
The detector will alert you with an audible and
visual warning before it shuts off. This auto off
function can be programmed for the following:
Off, 1, 2, or 3 hours. During this warning you can
reset the timer by pressing any button. If the unit
has automatically turned itself off, press the Power
button to turn the unit back on. You can manually
engage the Auto Shut Off Mode by pressing and
holding the City button until one beep is heard.
Refer to “Option Select Mode” for instructions
for changing the Auto Shut Off Mode settings.
exited. To enter: (
(
C
C
A
A
L
L
M
M
O
O
DD
EE
&&
CC
OO
M
M
B
B
O
O
--
55
44
00
OO
NN
L
L
Y
Y
))
Within 30-60 seconds an alert is sounded; to
show alertness, the driver must press either the
City, Volume, or Quiet buttons within 3-5 seconds. If
a button is pressed within 3-5 seconds, the cycle is
repeated.
If a button is not pressed within 3-5 seconds alarm
sounds and the display shows:
• Press Power to exit.
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT
operate a vehicle if you are drowsy. During
extended periods of vehicle operation, you should
take frequent breaks. Improper reliance on the Stay
Alert feature may result in vehicle damage,
personal injury or death. NEVER OPERATE A
VEHICLE IF YOU ARE DROWSY.
Sa fe t y Wa r n in g Sys t e m ™
In communities where transmitters are located,
the Safety Warning System™ displays over 60
text messages. When Safety Radar is detected,
a unique audio alert sounds.
Filter Mode
There are times when a radar detector can emit
the same frequency as police radar and can
cause your detector to falsely alarm. Sometimes
a detector can display a signal when picking up
another radar detector in vehicle close by. The
Whistler Filter Mode option provide a method
to study the signal which will verify if the signal
is a legitimate police radar or a false alert from
another detector.
Filter: Allows for normal filtering.
Filter 1: Provides an extra step to analyze the signals
that may come from other detectors.
Filter is the factory default and should provide adequate
filtering for most conditions. If you experience excessive
alerts due to radar detectors in other vehicles, try the
Filter 1 option. Filter Mode functions in both Highway
and City Modes. See Option Select Mode to change
Filter settings.
Safety Warning System Text
Example: Poor - Road - Surface.
Note: Not all areas have Safety Warning System™
transmitters.
11
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
P OP ™ M ODE ALERTS
VG-2 ALERTS
RESET FEATURES
Reset Features
POP™ Mode Alerts
VG-2 Audio/Visual Alerts
Note: You must turn this feature on before it will
detect VG-2.
Because POP™ Mode radar utilizes the same
K or Ka band frequencies, POP™ Mode Alerts will be
displayed as regular radar alerts.
All user features can be reset to factory settings.
•
•
•
Unplug the Power Cord from the unit.
Remove the Batteries.
When a VG-2 signal is detected, the detector ‘hides’ its
own radiated signal and becomes undetectable by
the VG-2.
Every 30 seconds, the detector checks for a VG-2
signal. If a VG-2 signal is still present, the unit
continues to hide and repeats the VG-2 alert. If no
signal is detected, two beeps are provided,
indicating an ‘all clear’ condition. During a VG-2
Alert X, K, and Ka band signals cannot be
received (Reference page 21 for VG-2 information).
Press and hold Power/BL and Quiet/Vol
buttons.
LASER/RADAR ALERTS
•
•
•
Plug the Power Cord into the unit.
Wait for 2 beeps.
Release Power/BL and Quiet/Vol buttons.
Speed Radar Audio/Visual Alerts
When X, K, or Ka is detected, the band ID and
signal strength are displayed. The audio alert is
continuous and has a pattern like a geiger
counter. The faster the beep, the closer or
stronger the radar source.
Unit is now reset to the following features
and settings.
Default factory settings are:
1. Audio to level (4).
2. Highway/Combo Mode.
3. Auto Quiet Mode OFF.
4. VG-2 Detection Mode OFF.
5. Safety Radar OFF.
Laser Audio/Visual Alerts
When a laser signal is detected, the audio alert is
continuous for a minimum of 3 seconds.
Alert Priority
When two or more signals are received at the
same time, the alert priority is:
1. Laser
• The Display Shows:
®
Pulse Protection
6. Vehicle Battery Saver to 1 hour.
7. Full Power Up sequence.
8. Default TONE 3.
2. VG-2
Pulse (instant-on) radar is more difficult to
detect than conventional radar because it
remains ‘off’ until activated to measure the speed
of a targeted vehicle.
3. Speed Radar
4. Safety Radar
9. POP ON.
Example:
10. Backlighting Dim/Bright.
If X band is alerting, then suddenly a VG-2
signal is detected, the VG-2 warning will
override the X band alert.
11.
Periscopes to Flashing.
When a pulse type transmission is detected, the
Whistler detector sounds an urgent 3-second
audio warning and the display shows:
TROUBLESHOOTING
Your Whistler detector is expertly engineered
and designed to exacting quality standards to
provide you with reliable, trouble-free operation.
If your unit has been correctly installed following
the guidelines in this manual, but is not
operating optimally, please refer to the
troubleshooting guide below.
After the 3-second pulse alert, the standard alert
pattern continues for as long as the signal is
present.
It is important to respond promptly to a pulse
alert, since warning time may be minimal.
PROBLEM: No display or audio.
•
Make sure the batteries are installed with the
correct polarity.
Make sure the batteries are fully charged.
•
14
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
CARE AND M AINTENANCE
FCC INFORM ATION
•
•
Make sure the battery contacts are clean.
Check the fuse in the plug; replace if
necessary with a 2 amp, 3AG type.
Check the fuse for lighter socket; replace if
necessary.
FCC ID : HSXWH15
Care And Maintenance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
During the summer months, avoid prolonged
exposure to direct sunlight by removing your unit
from the dash when your vehicle is parked for an
extended period of time. Do not spray water,
cleaners, or polishes directly onto the unit. The
spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive
cleaners on the unit’s exterior.
•
(1) This device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
•
Make sure the lighter socket is clean.
PROBLEM: Unit alarms when vehicle hits
bumps.
Make sure the batteries are seated properly.
Make sure that the battery door is fully closed.
Make sure the battery contacts are clean.
Check for the loose lighter socket; tighten
and clean.
Check the connections at both ends of the
power cord. Substitute another cord to
determine if the cord is defective. Return
defective cord to the factory.
Important: FCC (Federal Communications
Commission) requirements state that changes or
modifications not expressly approved by
Whistler could void the user’s authority to
operate the equipment.
•
•
•
•
As with all battery operated devices remove the
batteries when the unit will not be used for an
extended period of time. Damage caused by
leaky or improperly charged batteries are not
covered under warranty.
SP EED M ONITORING
Radar Facts
•
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are picked up by the radar gun’s
receiving section. When a radar beam reflects
off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles
per hour to determine your vehicle’s speed.
Currently, the FCC permits operation of traffic
radar guns at X Band (10.500 - 10.550 GHz), K
Band (24.050 - 24.250 GHz), and Ka Band (33.400
- 36.000 GHz).
ARE DETECTORS LEGAL?
In Most States YES!
Laser-Radar detectors are legal in every state for
automobiles and light trucks (under 10,000 lbs.)
except Virginia and Washington, D.C., which
have local regulations restricting the use of
radar receivers in any vehicle.
PROBLEM: Audio alerts are not loud
enough.
Cancel Auto Quiet Mode or City Mode.
Check audio level setting (see page 7 ).
•
•
PROBLEM: Low Battery Life.
•
One or more of the batteries may be
The Federal Highway Administration (FHWA)
passed a nationwide regulation, effective
January 1994, which prohibited radar and laser
detector use in vehicles over 10,000 lbs.
defective.
•
See the battery life tips on page 6.
Note: A radar detector will not alarm if an
officer is not transmitting on any one of the
above radar bands.
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide, please
call Whistler Customer Service at 1-800-531-0004
or visit our FAQ page at
www.whistlergroup.com/faq-detectors.asp,
before returning your unit for service.
POP™ Mode
POP™ Mode is a feature on some radar guns
operating on K and Ka bands. When the gun is
in POP™ Mode and activated, a brief burst of
energy, less that 1/15 of a second, is transmitted
and the vehicle’s speed is quickly acquired. A
detector without POP™ Mode detection
capability cannot respond to this brief
transmission.
PROBLEM: Unit turns itself off
See Auto Shut Off Mode on page 11
•
17
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SP EED M ONITORING
SP EED M ONITORING
SP EED M ONITORING
Note: Having a radar detector capable of
detecting the VG-2 may alert you to the
presence of a speed trap. The newest tool
Police have to detect radar detectors is called
Spectre. As of this printing. Spectre can detect
the majority of undetectable (VG-2) laser/radar
detectors on the market.
Laser Facts
Laser Tips
It’s well documented that many radar guns
cannot reliably provide the speed of a targeted
vehicle that is traveling in a group of vehicles. In
contrast, a laser gun can target a specific vehicle
out of a line of traffic and determine its speed.
The advantage of laser over radar in terms of
target identification is the result of the laser gun’s
narrow beam. A radar gun’s transmission can
cover more than a four-lane highway at a distance
of 1,000 feet, compared with a laser gun’s
transmission which covers about 3 feet at the
same distance. For best protection, keep these
points in mind:
If you are the targeted vehicle, a laser gun can
often determine your speed within a few
seconds after you receive an alert. In this
situation, there is generally no time to safely
adjust your speed. However, if you are traveling
near or behind the targeted vehicle, and receive
an alert, response time should be sufficient. Any
laser alert, regardless of duration, requires
immediate action!
It is the responsibility of the radar detector user to
know and understand the laws in your area
regarding the legality of the use of radar detectors.
Other Speed Detection Systems
W ARRANTY INFORM ATION
Consumer Warranty
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can provide
a warning. These techniques include:
This Whistler Laser-Radar detector is warranted
to the original purchaser for a period of one year
from the date of original purchase against all
defects in materials and workmanship. This
limited warranty is void if the unit is abused,
modified, installed improperly, or if the housing
and/or serial numbers have been removed. There are
no express warranties covering this product other
than those set forth in this warranty. All express or
implied warranties for this product are limited to the
above time. Whistler is not liable for damages
arising from the use, misuse, or operation of this
product.
•
Because the vehicle’s license plate or
headlights are the laser gun’s primary targets,
mounting the Whistler detector on the
dashboard can improve laser detection at
short range.
• Do not follow closely behind any vehicle. If you
can’t see past a vehicle ahead of you, chances
are your detector won’t either.
•
P
matches your driving speed.
•
Vascar/Aircraft - The time it takes a vehicle to
travel a known distance is measured.
Radar Detector Detectors: VG-2,
Spectre
•
The receiving range of laser signals will
not be the same as radar signals. Laser
guns are most often used at short range.
The Interceptor VG-2 or simply VG-2, is one type of
microwave receiver used by Police to detect signals
radiated by the local oscillator of a radar detector.
Because its purpose is to identify persons driving
with radar detectors, these devices are known as a
“radar detector detector” (RDD).
Whistler Laser-Radar detectors receive all current
laser guns which operate at a laser wavelength of 905
+/- 10mm.
Note: Damaged caused by incorrect battery
placement or battery leakage is not covered
under this warranty.
An RDD is the primary tool used by the police to
identify radar detector equipped vehicles. If caught
in a state or country where detectors are illegal (see
page 18), drivers risk losing their radar detector and
receiving a fine. In addition, instant-on radar is
almost always used in combination with an RDD,
leaving unsuspecting motorists vulnerable to receive
two tickets - one potentially for speeding, the other
for possession of a detector.
•Pro Laser™ I II III
•LT1 20-20
•Ultra Lyte
20
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
W ARRANTY INFORM ATION
W ARRANTY INFORM ATION
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the following space:
s/n______________.
Service Under Warranty
During the warranty period, defective units will
be repaired without charge to the purchaser when
returned with a dated store receipt to the address
below. Units returned without a dated store
receipt will be handled as described in section
“Service Out Of Warranty.”
Due to the specialized equipment necessary for
testing a Laser-Radar receiver, there are no
authorized service stations for Whistler brand
detectors other than Whistler.
Units without serial numbers are not covered under warranty.
Important: To validate that your unit is within
the warranty period, make sure you keep a
copy of your dated store receipt. You may
register your warranty online at
warranty verification purposes, a copy of
your dated store receipt must accompany any
unit sent in for warranty work.
When returning a unit for service, please
follow these instructions:
Service Out of Warranty
Units will be repaired at ‘out of warranty’ service
rates when:
1. Ship the unit in the original carton or in a
suitable, sturdy equivalent, fully insured, with
return receipt requested to:
• The unit’s original warranty has expired.
• A dated store receipt is not supplied.
• The unit has been returned without its serial
number.
• The unit has been abused, modified,
installed improperly, or had its housing
removed.
Whistler Repair Dept.
551 N 13th St.
Rogers, AR. 72756
Please allow 3 weeks turnaround time.
Important: Whistler will not assume
responsibility for loss or damage incurred in
shipping. Therefore, please ship your unit
insured with return receipt requested. CODs
will not be accepted!
The minimum out of warranty service fee for
your Whistler detector is $55.00 (U.S.). If you
require out of warranty service, please return
your unit as outlined in the section “Service
Under Warranty” along with a certified check or
money order for $55.00. Payment may also be
made by MasterCard, VISA or American
Express; personal checks are not accepted.
2. Include with your unit the following
information, clearly printed:
• Your name and street address (for
shipping via UPS), a daytime telephone
number and an email address, if applicable.
• A detailed description of the problem (e.g.,
“Unit performs self-test but does not respond
In the event repairs cannot be covered by the
minimum $55.00 service fee, you will be
contacted by a Whistler technical service
specialist who will outline options available to
you.
`
to radar”).
• A copy of your dated store receipt or bill of
sale.
If you elect not to have your unit repaired, it will
be returned to you along with your certified
check or money order.
23
24
W ARRANTY INFORM ATION
ACCESSORIES
Important: When returning your unit for service,
be certain to include a daytime telephone
number and an email address (if applicable).
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visit our online store at
www.whistlergroup.com
Customer Service
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call Customer Service at:
Order # Description
Price
$9.95
500501
202152
206552
206553
206880
Zippered Travel Case
1-800-531-0004
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or
visit the FAQ’s at www.whistlergroup.com.
Large Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
$9.95
$14.95
$15.95
$9.95
SP ECI FICATIO NS
Laser Wavelength:
Hardwire Kit (10' )
(for wiring to fuse box)
905 ± 50 nanometers (nm)
206666
Modular* Cord Package
(includes coiled and straight
cords, and power adapter)
$17.95
Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
202156
402081
Package of 4 Suction Cups
Non Skid Dash Pad
$2.95
$6.95
Operating Temperature Range:-10˚ C to +70˚ C
(14˚ F to +158˚ F)
* Modular: Interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00 . Prices are
subject to change without notice.
Power Requirements:
3 AA Ni-MH batteries 1.2 volts each.
Operational 12 to 15 volts DC, 250mA nominal
with power cord.
One or more U.S. patents may apply:
#5,666,120, #7,215,276
POP™ Mode is a trademark of MPH Industries, Inc.
SWS™ is a trademark of Safety Warning System L.C.
Specifications are subject to change
without notice.
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|