USER MANUAL
PEK1370W, PEK1350W,
GEK1235W, GEK1385W
ELEVATED COOKING APPLIANCES
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd
1
28/06/11 12:07 PM
IMPORTANT SAFETY INSTRUCTIONS
Please read the user manual carefully and store in a handy
place for later reference.
The symbols you will see in this booklet have these meanings:
WARNING
•
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised
to ensure that they do not play with appliance.
DO NOT allow young children to use the cooker.
DO NOT use the cooker as a heater.
WARNING
This symbol indicates information concerning your personal safety
CAUTION
•
•
•
This symbol indicates information on how to avoid damaging
the appliance
During use, this appliance becomes hot. Care should
be taken to avoid touching hot surfaces, e.g. oven door,
heating elements.
TIPS & INFORMATION
This symbol indicates tips and information about use of the appliance
•
•
This appliance must not be used as a space heater.
In order to avoid a fire, the appliance must be kept
clean and vents kept unobstructed.
•
•
•
•
•
•
•
Do not spray aerosols in the vicinity
ENVIRONMENTAL TIPS
This symbol indicates tips and information about economical and
ecological use of the appliance
of the appliance during operation.
Do not store flammable materials in
or under the appliance, e.g. Aerosols.
Accessible parts will become hot when in use.
To avoid burns and scalds children should be kept away.
Do not line the bottom of the oven or grill with foil or
cookware. It will damage the enamel.
This symbol indicates never to do this
This symbol indicates always do this
This appliance must not be installed on a box or
in a closed cupboard.
Oven gloves should be worn when accessing
hot internal parts.
If the electrical supply cord is damaged, it must be
replaced by a suitably qualified individual in order
to avoid a hazard.
TIPS & INFORMATION
IMPORTANT – CHECK FOR ANY DAMAGES OR MARKS
If you find the oven is damaged or marked, you must report it
within 7 days if you wish to claim for damage/marks under the
manufacturers warranty. This does not affect your statutory rights.
•
Do not modify this appliance.
ENVIRONMENTAL TIPS
INFORMATION ON DISPOSAL FOR USERS
•
Most of the packing materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
If you wish to discard this product, please contact your
local authorities and ask for the correct method of disposal.
•
SAFETY
3
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd
3
28/06/11 12:07 PM
WARNING
WARNING
GRILL
COOKTOPS
The grill door must be left fully open whilst grilling
in a separate grill wall oven.
Do not allow pots to boil dry, as damage to both
pan and cooktop may result.
The grill drawer must be left approximately two
finger widths ajar whilst grilling in a separate grill
underbench oven.
Do not operate the cooktop for an extended period
of time without a utensil on the hot plate.
Do not allow large cookware to overhang the
cooktop onto the adjacent benchtop. This will cause
scorching to the benchtop surface.
Always turn the grill off immediately after use as fat
left there may catch fire.
Do not cover the insert with foil, as fat left there may
catch fire.
If the ceramic glass is accidentally cracked, switch off
the appliance to avoid the possibility of electric shock.
Always keep the grill dish clean as any fat left may
catch fire.
Do not place heat resistant mats, wire mats or
aluminium foil under pots or pans.
Do not leave the grill on unattended.
Do not cook food directly on the ceramic glass surface.
To avoid a fire, ensure that grill trays and fittings are
always inserted into the appliance in accordance
with the instructions.
Do not allow cooking utensils to intrude into the area
which is close to the controls.
Ensure burner caps are in their proper positions.
Do not place thick portions of food under the grill.
Foods may curl, catch and ignite.
Do not use round bottom woks, wok stands or similar
utensils that could lead to over heating of hotplates
and possible damage to the cooking surface.
Do not store flammable materials in the grill.
If the burner is not lit in eight seconds, turn the
control knob to off and allow 15 seconds for the
gas to clear.
Do not use the ceramic cooktop as extra bench
space or as a cutting board.
Accessible parts may become hot when grill
is in use. Children should be kept away.
INSTALLATION, CLEANING AND SERVICING
An authorised person must install and service this
appliance. (Certificate of Compliance to be retained)
OVEN
Do not install gas models in marine craft, caravans
or mobile homes because these products are not
fitted with a flame safeguard on each burner.
During use the appliance becomes hot. Care should
be taken to avoid touching the hot surfaces inside
the oven.
Before using the appliance, ensure that all packing
materials are removed from the appliance.
Switch the appliance off before removing the oven
light glass for globe replacement.
In order to avoid any potential hazard, the enclosed
installation instructions must be followed.
To avoid an accident, ensure that oven shelves and
fittings are always inserted into the appliance in
accordance with the instructions.
Ensure that all specified vents, openings and
airspaces are not blocked.
Do not use the door as a shelf.
Where the appliance is built into a cabinet, the cabinet
material must be capable of withstanding 85°C.
Do not push down on the open oven door.
Always ensure the appliance is switched off before
cleaning or replacing parts.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they
can scratch the surface, which may result in
shattering of the glass.
If this appliance is gas operated it contains aluminium
fittings. Do not use caustic based cleaners.
Do not use steam cleaners, as this may cause
moisture build up.
Always clean the appliance immediately after any
food spillage.
To maintain safe operation, it is recommended that
the product be inspected every five years by an
authorised service person.
This appliance must be earthed.
SAFETY
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd
4
28/06/11 12:07 PM
DESCRIPTION OF YOUR APPLIANCE
PEK1370W
1. Hotplate Control Knob
9
•
Adjusts temperature of hotplate.
Can be rotated in either direction.
2. Hotplate Indicator Lamp
Comes on when a hotplate is turned on.
•
3. Oven light switch
Located on oven temperature control knob.
•
6
5
8
7
4. 2 Hour Cut-Off Timer
•
•
Sets baking/grilling reminder time.
Sets automatic baking cut-off time.
(See page 17 for more information).
5. Grill Temperature Control Knob
1
•
Sets grilling temperature for separate grill.
Can be rotated in either direction
(See page 14 for more information).
PEK1350W
4
6. Grill Indicator Lamp
Comes on when grilling.
•
7. Oven Temperature Control Knob
•
Sets temperature for baking.
(See page 10 for more information)
2
6
5
8
7
8. Oven Indicator Lamp
•
Comes on when the oven temperature control knob is
operated. Cycles on and off automatically when baking.
9. Programmable Clock
•
•
Sets baking/grilling reminder times.
Sets automatic cooking duration and stop time.
NOTE: Clock time must be set before oven can
operate. (See page 17 for more information).
1
DESCRIPTION
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd
5
28/06/11 12:07 PM
DESCRIPTION OF YOUR APPLIANCE
GEK1235W
1. Hotplate Burner Control Knob
•
Sets the hotplate cooking temperature.
(See pg 16 for more information).
2. Grill Burner Control Knob
•
Sets the grilling temperature.
(See pg 14 for more information).
3. Oven Burner Control Knob
•
Sets the baking temperature.
(See pg 10 for more information).
NOTE: Diagram depicts right hand version.
4. Electronic Igniter Switch
•
Ignites the hotplate burners, grill burner and
oven burner.
NOTE: The appropriate burner control knob
has to be set first.
GEK1385W
5. Fan Switch
•
Turns oven fan on/off.
6. Light Switch
•
Turns oven light on/off.
7. 60 Minute Ringer Timer
•
Sets reminder time.
(See pg 17 for more information).
8. Manual Grill Igniter Button
•
Ignites the grill burner.
NOTE: The grill burner control knob has to be set to
“High” first. (see pg 14 for more information).
9. Manual Oven Igniter Button
•
Ignites the oven burner.
NOTE: The oven burner control knob has to be held
down first (see pg 11 for more information).
DESCRIPTION
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd
6
28/06/11 12:07 PM
BEFORE OPERATING YOUR APPLIANCE
FOR THE FIRST TIME
FITTING OVEN SHELVES
•
•
Ensure shelf orientation is correct (refer picture).
Slide into oven at an angle until raised back of shelf
is past the stop on side runners.
Lower front of shelf and push in until stop is reached.
NOTE: The top ledge is not a shelf position.
TIPS & INFORMATION
SETTING THE TIME
•
•
If you have purchased a model fitted with a 3 button
programmable timer, you MUST set the time of day before
you can operate your appliance.
ELECTRONIC CLOCK
•
•
•
After the appliance has been electrically connected
“12.00” will be displayed and the “clock” indicator
will flash.
To set the time of day, press – or +. 5 seconds after
the last change, the “clock” indicator will disappear,
confirming the time has been set.
NOTE: The clock has a 24-hour display.
NOTE the orientation of the
side and rear features.
PREPARING YOUR APPLIANCE FOR THE FIRST TIME
•
Please remove all internal boxes and bags from
the oven & remove visible labels from surfaces
before operation.
Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the
oven is completely dry.
New appliances can have an odour during first
operation. It is recommended to ‘run in’ your oven
before you cook for the first time. Run the oven at
180ºC for 2-4 hours and ensure that the room is
well ventilated.
•
•
•
•
DO NOT line the oven with foil, it will damage
the enamel.
If your appliance is fitted with a 2-hour “Auto Off”
timer, make sure it is set to the ‘O’ marker for
manual operation.
If your appliance is fitted with solid hotplates,
turn heat setting to high for 3 minutes to fully harden
the coating. When cooled, apply a thin coating of
cooking oil to seal the surface.
•
OPERATION
7
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd
7
28/06/11 12:07 PM
PARTS OF YOUR ELECTRIC COOKER
Check the parts of your cooker against the diagram before you use your cooker for the first time.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Splashback
Grill Vent
Hob
Control Panel
10. Inner Door Glass
11. Oven Vent
12. Fan & Element Cover
13. Oven Element
14. Removable Shelf
15. Oven Door
Grill Reflector
Removable Grill Dish Side Support
Removable Grill Dish & Tray
Grill Element
Grill Door
PARTS
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd
8
28/06/11 12:07 PM
PARTS OF YOUR GAS COOKER
Check the parts of your cooker against the diagram before you use your cooker for the first time.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Splashback
Grill Flue Vent
Removable Hotplate Burner
Removable Trivet
Control Panel
Removable Grill Dish Side Support
Removable Grill Dish and Tray
Grill Burner
10. Inner Door Glass
11. Oven Flue Vent
12. Fan Cover (fan forced ovens only)
13. Oven Burner Cover
14. Removable Shelf
15. Oven Door
Grill Door
PARTS
9
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd
9
28/06/11 12:07 PM
USING YOUR OVEN
OVEN SAFETY WARNINGS
USING THE OVEN OF YOUR ELECTRIC COOKER
Fan Baking (Fan forced oven models)
WARNING
•
•
•
With fan forced ovens, heat comes from the element
surrounding the fan (see diagram below).
The fan circulates the hot air and so the temperature
is more even throughout the oven.
Fan baking:
– Cooks faster and at lower temperatures than
conventional baking
•
ALWAYS follow the instructions for putting the shelves
and fittings into the oven, to avoid accidents.
DO NOT line the oven with foil.
DO NOT use polyunsaturated oil when cooking in the
oven. This type of oil can cause heavy deposits inside
the oven.
•
•
•
DO NOT touch the hot surfaces or heating elements
inside the oven.
– Is good when you are cooking food on
different shelves at the same time.
•
•
•
DO NOT use the oven door as a shelf.
DO NOT push down on the open oven door.
DO NOT place cookware or anything else on the
bottom of conventional model oven.
DO NOT place shelves on top of upper most shelf
runner as there are no stops for shelf withdrawal.
NOTE: Some variation in browning is normal with
a fan forced oven.
NOTE: 3 Button timer models MUST have the clock set
after a power outage to operate oven!
•
OVEN SHELF LOCATION
Not a shelf
position
5
4
3
2
1
Preheating the oven
We recommend that you preheat your oven before
you put the food in to be cooked.
1. Set the required temperature.
2. When the indicator light goes out, put the food
in the oven, close the door and set the timer.
5 Position Rack
USAGE
10
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 10
28/06/11 12:07 PM
USING THE OVEN OF YOUR GAS COOKER
Baking
Lighting the oven
1. Press the oven burner control knob and turn it a quarter
of the way.
2. For manual ignition models
•
•
•
With conventional oven models heat comes from the
burner below the food at rear of oven.
The burner is controlled by the thermostat which sets
the oven temperature.
There is a variation in temperature between the bottom
and the top of the oven. The bottom shelf is the coolest
and the top shelf is the hottest.
– Keep the oven burner control knob pushed in and
at the same time press the oven igniter button on the
right hand side of the control panel.
For electronic ignition models
– Keep the oven burner control knob pushed in and at
the same time press the electronic igniter switch on
the right hand side of the control panel.
3. Hold the control knob for about 20 seconds when the
burner lights, before releasing it.
NOTE: If the oven does not light within 10 seconds, or the
flame goes out after you release the oven burner control
knob, follow these steps:
1. Turn the oven burner control knob back to the start
position and let go.
2. Open the oven door to stop gas building up.
3. Wait one minute and repeat the steps to light the oven.
Preheating the oven
We recommend that you preheat your oven before you put
the food in to be cooked.
The following table tells you how long it takes to preheat
a cold oven to different temperatures.
Fan Baking (Fan forced oven models)
•
•
•
With fan forced ovens, heat comes from the burner
below the food at rear of oven.
The fan circulates the hot air and so the temperature
is more even throughout the oven.
Fan baking:
– Cooks faster and at lower temperatures
than conventional baking
SET TEMPERATURE C
HEATING TIME
5 minutes
150
200
250
8 minutes
– Is good when you are cooking food on
different shelves at the same time.
12 minutes
NOTE: We recommend that you preheat your oven before
you turn the fan on.
NOTE: Some variations in browning is normal with a fan
forced oven.
Cookware
For best cooking results with gas ovens, dark coloured trays
and baking dishes are recommended.
USAGE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 11
28/06/11 12:07 PM
GET TO KNOW YOUR OVEN
Get to know your new oven with this ‘Simple Test Cake’
Although we strive for a perfect performing oven,
it’s possible that there will be some variation in colour
when baking. Therefore, we suggest this simple, easy
and delicious to make Simple Test Cake, it can help you
understand your new oven. All ovens do sometimes have
hot or cold spots, therefore it is important to judge with
your eye as you may require to rotate during baking.
‘Simple Test Cake’
125g butter, softened to room temperature
1 cup caster sugar
1 teaspoon pure vanilla essence
4 large eggs
2 cups self-raising flour
pinch of salt
4 tablespoons (80mL) full-cream milk
Method:
1. Butter base and sides of two, 20cm straight-sided
round or square cake pans. Then line the base with
grease proof or baking paper.
2. Preheat oven to moderate ‘180ºC’ (170ºC fan forced)
and ensure oven shelf is in the centre position of oven.
3. Cream softened butter and sugar until light in colour.
4. Add vanilla essence.
5. Then eggs one at a time, beating well after
each addition.
6. Sift flour and salt into the mixture and beat until
well combined.
7. Add milk and beat or stir to combine.
8. Spoon mixture equally between prepared cake pans.
9. Bake in preheated oven, middle shelf for about 25 to
35 minutes or until when tested with a fine cake skewer
it comes out clean or the edges of the cakes have
come away slightly from the sides of the cake pans.
10. Remove from oven to wire cake rack and rest
for 5 minutes before removing from cake pans.
Cool completely.
To Serve: sandwich together with your favourite jam
or conserve, and dust top with pure icing sugar.
NOTE: If desired substitute butter for either margarine
or olive oil spread.
Recipe is based on the Australian standard metric
250mL cup and 20mL tablespoon sets.
KNOW YOUR OVEN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 12
28/06/11 12:07 PM
OVEN COOKING GUIDE
The following is intended as a guide and experience may show some slight variation to be necessary to meet individual requirements.
FOOD
CONVENTIONAL OVEN
FAN FORCED OVEN
Temperature in °C
Oven Shelf Position*
Time in minutes
Temperature in °C
Oven Shelf Position*
Time in minutes
Scones
Plain or Fruit
Biscuits
220
2 (3)
10 – 15
210
Any
10 – 15
Rolled
170 (180)
190
2
10 – 15
12 – 15
30 – 35
150 (170)
180
Any
Any
Any
10 – 15
12 – 15
30 – 35
Spooned
2
Shortbread
160
1 or 2
150
Biscuits
Meringues
Hard – individual 110
2
2
1
90
100
165
100
Any
Any
Any
90
Soft – Individual
Pavlova – 6 egg
Cakes
180
15 – 20
75
15 – 20
75
110 (120)
Patty cakes
190
3 (4)
2
15 – 20
20 – 30
30 – 40
180
180
170
170
130
Any
Any
Any
Any
15 – 20
20 – 30
30 – 40 (25)
180
Sponge – 4 egg 180
Plain Butter Cake 180
2
Rich Fruit Cake
Pastry – Shortcrust
Cornish Pasties
Custard Tart
140 (150)
2
200 (200/180)
2
40 – 45 (10/30) 180 (180/160) Any
40 – 45 (10/30)
200/180
1 (3)
10/20 – 30
190/170
Any
20 – 30
(220/180)
(10/35)
(200/180)
(10/25)
Pastry Choux
Cream Puffs
Yeast Goods
Bread
210
2
1
25 – 30
200
200
Any
Any
25 – 30
25 – 30
210
25 – 30
* Shelf position is counted from the bottom shelf up ie. Bottom shelf position is 1
Where the gas models vary from electric, details for gas cooking is shown in brackets
MEAT
PREFERRED TEMPERATURE °C
MINUTES PER KG
Beef
200°C
Rare
35 – 40 minutes
45 – 50 minutes
55 – 60 minutes
40 minutes
Medium
Well Done
Medium
Lamb
200°C
Well Done
Well Done
Well Done
60 minutes
Veal
180°C
60 minutes
Pork
200°C
60 minutes
POULTRY OR FISH
Chicken
Duck
PREFERRED TEMPERATURE °C
180°C
MINUTES PER KG
40 – 45 minutes
60 – 70 minutes
35 – 40 minutes (less than 10kg)
40 – 45 minutes (more than 10kg)
20 minutes
180 – 200°C
180°C
Turkey
Fish
180°C
COOKING GUIDE
13
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 13
28/06/11 12:07 PM
HANDLING BAKING PROBLEMS
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
Uneven cooking
• Incorrect shelf position
• Oven tray too large
• Select shelf which puts food in centre of oven
• Try other trays or dishes
• Tray not in centre of oven
• Air flow in oven uneven
• Put trays in centre of oven
• Turn food during cooking
Baked products too brown
on top
• Oven not pre-heated
• Aluminium foil in oven
• Pre-heat until indicator light goes off
• Remove foil
• Baking tins too large for recipe
• Baking tins not evenly spaced
• Use correct size tins
• Place baking tins so that there is at least 3cms
between tins and oven walls
• Food not evenly sized or placed on trays
• Make food same size and shape and spread
evenly on trays
• Food placed too close to top of oven
• Place food in middle or on a lower shelf
Baked products too brown
on bottom
• Baking temperature too high
• Baking tins too large for recipe
• Baking tins are dark metal or glass
• Lower temperature
• Use correct size tins
• Change to shiny, light tins or lower temperature
by 10ºC
• Food too low in oven
• Oven door opened too frequently
during cooking
• Cook one shelf higher
• Do not open door until half way through
cooking time
Cakes have cracked
thick crust
• Baking temperature too high
• Food too high in oven
• Cake batter over mixed
• Pan too deep
• Lower temperature
• Cook one shelf lower
• Mix just long enough to combine ingredients
• Check size of pan and use recommended size
• Change to shiny tins
• Baking tins too dark
Baking products are pale,
flat and under cooked
• Baking temperature too low
• Food too low in oven
• Baking time too short
• Incorrect tin size
• Raise temperature
• Cook one shelf higher
• Increase cooking time
• Use correct size tin
Cakes fallen in centre
• Baking temperature too low
• Baking time too short
• Measurement of ingredients is wrong
• Door opened too early
• Raise temperature
• Increase cooking time
• Check recipe
• Do not open door until three quarters (¾) of
way through cooking time
Crusts too thick
• Incorrect ingredients
• Poor circulation
• Check recipe
Meat and potatoes not
• Put food onto a rack to allow air to circulate
browning in fan oven
Juices running out of meat
• Do not pierce meat with fork but turn with tongs
* NOTE: Condensation on oven door is normal
HANDLING BAKING
14
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 14
28/06/11 12:07 PM
USING YOUR GRILL
GRILL SAFETY WARNING
Handling grilling problems
PROBLEM
CAUSES
WHAT TO DO
Grilled meats
overcooked on
outside and raw
in centre
• Meat too close
to grill
• Grill at lower
shelf position
WARNING
•
ALWAYS turn the grill off immediately after you have
finished cooking. Fat left in the grill can catch fire.
ALWAYS leave the grill door open during grilling.
ALWAYS make sure that grill trays are fitted into the
grill according to instructions.
•
•
Excess grill smoke
• Build up of fats
in grill
• Clean grill
•
•
•
DO NOT line the chrome grill rack with foil.
DO NOT leave the grill unattended.
Juices running out
of meat
• Do not pierce
meat with fork
but turn with tongs
DO NOT touch the hot surfaces inside the grill and
keep children away until the grill has cooled.
DO NOT place thick pieces of food under the grill.
Food may catch fire.
Grilled steaks and
chops buckling
• Cut fat with knife
towards meat
•
•
DO NOT store flammable materials near the grill.
* NOTE: Condensation in grill compartment is normal
GRILLING
•
The grill works by directing heat onto the food.
(see diagram below).
•
The grill is suitable for tender cuts of meat, steak,
chops, sausages, fish, toasted cheese and other foods
which cook quickly.
•
•
The grill door MUST be left open during grilling.
For best results the grill should be preheated for 3 minutes
before cooking to seal the natural juices of meat.
Using the Grill of your Gas Cooker
NOTE: Before you cook on the grill for the first time,
turn the grill on for fifteen minutes with 10 mm of water in
the bottom of the grill dish. This will remove oils left on the
grill during manufacture.
1. Turn the grill burner control knob to HI.
2. For manual ignition models
– Press the manual igniter button on the left hand side
of the control panel.
For electronic ignition models
– Press the electronic igniter switch on the right hand
side of the panel.
NOTE: If the grill does not light after 8 seconds,
follow these steps:
1. Turn the grill burner control knob back to the start
position and let go.
2. Wait 15 seconds for the gas to clear and repeat the
steps to light the grill.
USAGE
15
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 15
28/06/11 12:07 PM
USING YOUR HOTPLATES
HOTPLATE SAFETY WARNING
Ceramic hotplates
•
The cooktop is made from ceramic glass, a tough,
durable material that withstands heating and cooling
without breaking. It is strong enough to hold the
heaviest utensil. However, it must be remembered that
as it is GLASS, it may break. Treat it accordingly!
The smooth glass surface has a pattern to show where
the elements under the glass are located (see diagram
below).
WARNING
•
•
DO NOT leave the hotplate on with no pot or pan on top.
DO NOT use pots and pans which are unsteady, as
these could overbalance.
DO NOT use asbestos mats or heat diffusers.
These will cause a temperature build-up which can
damage the cooktop.
•
•
•
When a hotplate is on, the hot surface warning light
(see diagram below), will come on. When the hotplate
is turned off this light will continue to glow until the
temperature of the hotplate drops below 60°C.
•
•
DO NOT allow pots or pans to boil dry. This could
damage the hotplate and/or the cooktop.
DO NOT let cooking utensils get too close to the
hotplate control knobs.
•
•
•
DO NOT use the cooktop as a kitchen bench.
DO NOT let children on or near the cooktop.
ALWAYS make sure that gas burners are in the
right position.
Using the Hotplates of your Electric Cooker
Check the hotplates on your cooker against the diagrams
and instructions below before you use your cooker for the
first time.
Solid hotplates
Coated hotplates are strong, solid cast hotplates that give
a wide contact with pots and pans for fast efficient cooking.
The hotplates are sealed all round with stainless steel
trim rings, food spills can’t penetrate to make cleaning
easier. The hotplates featuring a red dot in the centre
indicate the hotplate temperature. Once the hotplate
is heated the red dot turns darker.
Ceramic hotplates
WARNING
•
•
ALWAYS switch the cooker off if the ceramic glass top
is cracked or broken.
DO NOT use aluminium foil on the ceramic hotplates.
NOTE: Stored heat in the hotplate can be used for the last
few minutes of cooking. Simply turn off the control.
USAGE
16
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 16
28/06/11 12:07 PM
CHOOSING UTENSILS
GOOD
BAD
BAD
BAD
BAD
BAD
BAD
(recessed base)
(undersize)
(moisture on hotplate)
(convex base)
(oversize)
(no utensil)
Look at this diagram above which shows you which utensils to use on the hotplates and which utensils should not be used.
•
•
•
•
ALWAYS use pots and pans with flat bottoms. Uneven or thin bottoms will waste electricity and cook slowly.
ALWAYS use pots and pans which are slightly larger than the hotplate. Small pans waste electricity.
ALWAYS put pots and pans which are dry on the hotplates.
DO NOT use pots and pans which are too large.
Pans which overhang the hotplate more than 50mm can damage enamel cooktops.
USING HOTPLATE BURNERS
Using the Burners of your Gas Cooker
Manual ignition Models
Check the hotplates on your cooker against the diagram
below before you use your cooker for the first time.
To light these hotplates:
1. Choose the hotplate you want to use.
2. Turn the hotplate burner control knob to “Hi”.
3. Light with a hand held lighter e.g. match.
NOTE: To save gas, place pots and pans centrally over the
burners and adjust gas so that flames do not go past edges.
Electronic ignition Models
To light these hotplates:
1. Choose the hotplate you want to use.
2. Turn the hotplate burner control knob to “Hi”.
3. Press electronic igniter switch to release sparks
to the burner.
WHAT IT IS
WHAT IT IS USED FOR
1
Low heat burner 5.1MJ/h
• Used for simmering
• Used with small pots
and pans
2 & 3
Medium heat burners
9.0MJ/h
• Used for normal cooking
• Used with middle size
pots & pans
4
High heat burner
• Used for fast heating
• Used with large size
pots & pans
12.0MJ/h
USAGE
17
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 17
28/06/11 12:07 PM
USING THE TIMER AND CLOCK
OPERATING THE PROGRAMMABLE CLOCK
Using the 60 minute ringer timer
To set the timer:
WARNING
The Clock MUST be set to operate oven.
1. Turn the knob clockwise to the required number of
minutes. When the time has elapsed the timer will
give a short ring.
•
NOTE: For times below 20 minutes, turn the knob past
20 minutes and then back to the required number of minutes.
Using the 2 hour cut-off timer
Manual operation
The timer needs to be set at the “O” marker so that the oven
can be used manually.
General features
Automatic operation
Your 3 button programmable timer has the following features:
The 2 hour timer features an automatic oven “cut off”.
This means that a cooking period of up to 120 minutes
can be set.
1. Set the Oven Temperature Control Knob to the
required temperature.
2. Turn the cut-off timer clockwise to the required number
of minutes. For timer settings of less than 20 minutes,
turn the knob past 20 minutes and then back to the
required number of minutes. (Purpose – to set audible
ringer.)
3. When the timer returns to “Auto Off”, the timer gives
a short ring and the oven will be switched off.
4. The oven will not operate again until you turn the timer
back to the “O” marker.
•
•
•
Timer – your 3 button programmable timer allows you
to set a countdown time that will beep when the set
time has elapsed.
Cooking duration – You can set a cooking duration.
A timer will count down the preset cooking time, beep
when the time has elapsed and turn the oven off.
End cooking time – you can set a cooking finish time.
A timer will count down the preset cooking time, beep
when the finish time has been reached and turn the
oven off.
•
Delayed start cooking time – You can combine the
cooking duration and cooking end time to switch the
oven on and off at a specific time during the day.
NOTE: Your 3 button programmable timer only operates
with your oven.
NOTE: It is not recommended to use this timer for short
duration, e.g. boiling eggs.
Change the time of day (Daylight saving)
TIMER
1. Press the “mode” button until the “clock” indicator
begins flashing.
2. Press the – or + buttons to change the time. 5 seconds
after the last change, the “clock” indicator will
disappear, confirming the time has been set.
Setting the timer
1. Press the “mode“ button until the “timer” indicator
begins flashing.
2. Set the countdown time you want by using the – and +
buttons. 5 seconds after the last change the “timer” indicator
will stop flashing, confirming the timer has been set.
3. To stop the beeper, press any button.
OVEN TIMER
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. Set the oven to the desired temperature. The oven
indicator light will glow and the oven will come on.
3. Press the “mode“ button until the “cook time” indicator
begins flashing.
4. Set the cooking duration you want by using the – or
+ buttons. 5 seconds after the last change, the “cook
time” indicator will stop flashing, and the time of day
will be displayed.
NOTE: Do not forget to add preheating time if necessary.
USAGE
18
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 18
28/06/11 12:07 PM
OPERATING THE PROGRAMMABLE CLOCK
CLEANING THE COOKER
(continued)
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. Select the desired oven function temperature. The oven
indicator light will glow and the heating source will
come on.
3. Press the “mode“ button until the “end time” indicator
begins flashing.
4. Enter the time of day you want to finish cooking by
pressing the – or + buttons. 5 seconds after the last
change, the “end time” indicator will stop flashing
and the current time of day will be displayed.
WARNING
Safety Warnings about cleaning
•
ALWAYS make sure that the cooker is turned off
before cleaning.
ALWAYS clean cooker immediately after use.
DO NOT use steam cleaners. These may cause
moisture build-up.
DO NOT use caustic based cleaners. These will
damage aluminium parts.
•
•
•
Setting the delayed start cooking time
Cleaning the enamel
1. Program the “cook time” and “end time” as described
in the relevant sections. Once both the “cook time” and
“end time” have been set, the “cook time” and “end
time” indicators will stop flashing and the current time
of day will be displayed.
•
•
•
•
Keep enamel clean by wiping it with a soft cloth
dipped in warm soapy water.
Rub difficult stains with a nylon scourer or
creamed cleanser.
DO NOT use abrasive cleaners, powder cleaners,
steel wool or wax polishes.
If you use an oven cleaner, follow the instructions
on the product carefully.
To check or cancel settings
1. To check your settings, press the mode button until
the setting you want is displayed. A red light will
flash next to the mode (cook time, end time etc)
that is currently on display.
2. To cancel “delayed start” press the mode button until
a light flashes next to “end time”. Press and hold the –
button until the clock no longer reverses (you will hear
a beep). If you have left the temperature knob at a
setting the oven will start once the “end time” light
stops flashing.
3. To cancel “auto shut off” press the mode button until
a light flashes next to “cook time”. Press and hold the
– button until the clock no longer reverses at (“0:00”
and you will hear a beep). This automatically cancels
“delayed start”. If you have left the temperature knob at
a setting, the oven will start once the “cook time” light
stops flashing. Because you have cancelled “auto off” the
oven will continue to heat until you manually turn it off.
Cleaning the control panel
•
•
•
Make sure control knobs are in OFF position.
Remove knobs from control panel by pulling towards you.
DO NOT use too much water when cleaning control panel.
CLEANING THE GAS COOKTOP
1. Remove the trivets (see diagram below) by lifting
them from hob.
2. Remove the burner caps and crowns (see diagram below).
3. Wash hob with warm soapy water.
4. If crowns and caps are heavily soiled use a non-
abrasive cleaning compound.
On completion of cooking
The heat source will turn off, the timer will beep and
the “end time” and/or “cook time” indicators will flash.
1. Turn the temperature control to the off position.
2. Press any button to stop the timer from beeping.
WARNING
DO NOT use abrasive or caustic based cleaners.
DO NOT wash in a dishwasher.
DO NOT drop trivet onto hob. This may damage
the enamel surface.
OPERATION
19
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 19
28/06/11 12:07 PM
Refitting the burner crowns and caps
Ceramic hotplates
The burner crown must be fitted correctly into the burner cup
or damage will occur during operation.
•
Remove all spilt food with the razor blade scraper
supplied while the hotplate is still warm – NOT HOT.
If aluminium foil, plastic items or foods with a high
sugar content melt onto glass, use the razor blade
scraper to remove immediately before the hotplate has
cooled, otherwise pitting of the surface may occur.
High sugar content foods include jam, fruit, carrots,
tomatoes and peas.
•
To do this ensure that the 2 ribs on either side of the
spark plug hole are positioned into the 2 slots on the
burner cup. (see diagram below)
•
•
The burner cap is simply positioned over the top of the
burner crown.
•
When the ceramic hotplate has cooled, wipe clean
with dishwashing detergent on a damp cloth.
NOTE: DO NOT use abrasive sponges or scourers,
oven sprays or stain removers on ceramic hotplates.
These may damage, scratch or stain the ceramic cooktop.
Any pitting, staining or scratching WILL NOT be covered
by warranty.
CLEANING THE ELECTRIC HOTPLATES
Solid hotplates
Coated “easy care” solid hotplates have a robust, corrosion
resistant surface which is temperature resistant up to 600°C.
•
Clean the hotplates after they have cooled by wiping
with a damp cloth or sponge, use a small amount of
detergent if necessary.
Stubborn soiling can be removed by soaking the
hotplate for a few minutes with warm water and a little
detergent, followed by cleaning using a plastic scourer MUST follow the instructions on the product.
or soft brush.
Any spills or marks that still remain can be burnt off
by operating the hotplate on high without a pan for
2-3 minutes. When the hotplate has cooled clean it
normally as above.
After cleaning dry the hotplate by warming on a low
heat for approximately 30 seconds and then oil the
hotplate with a thin coating of cooking oil to prevent
rust or corrosion.
Ceramic hotplate
•
CLEANING THE GRILL COMPARTMENT
NOTE: You can use household enamel cleaners but you
DO NOT use a harsh abrasive cleaner, powder cleaners,
steel wool or wax polishes.
•
•
•
Some discolouration of the stainless trim ring is normal
during use. A stainless steel cleaner may be used to
clean the trim ring.
Removing the grill dish
Solid hotplate
1. Pull the grill dish forwards and upward.
2. Clean both the grill and grill rack in hot soapy water.
Heavy baked-on stains may require soaking.
3. When replacing the grill dish make sure that the rear of the
dish is fitted onto side supports before sliding backwards.
WARNING
There is a risk of burns if the hotplates are hot.
Ensure the hotplates have cooled before cleaning.
CLEANING
20
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 20
28/06/11 12:07 PM
CLEANING THE COOKER
(continued)
Removing the grill dish supports
The grill dish supports can be removed for easy cleaning
of the grill compartment.
1. Hold the grill dish supports at the front and pull them
inwards (see diagram below).
2. Clean the grill compartment with warm soapy water or
use a non-abrasive oven cleaner with a nylon scourer
for hard to clean areas.
3. Replace the grill dish supports by inserting the rear
hook into the rear hole.
WARNING
•
•
DO NOT use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can scratch
the surface which may result in shattering of the glass
DO NOT use the oven without the inner door glass fitted.
CLEANING THE OVEN COMPARTMENT
Removing the oven shelves
1. Slide the oven shelves towards you until they reach
the front stop.
2. Tilt them up at the front to clear the side supports
and lift them clear (see diagram opposite).
3. Wash the shelves in warm soapy water or soak
the shelves to remove heavy stains.
4. Place front peg into front hole and push in firmly
(see diagram below).
AIRWASH DOOR
The door on your cooker is designed to allow cool air to
pass up through the middle and out through the vent in the
top of the door (see diagram below).
This feature results in lower surface temperatures on the
outside of the door.
Removing the oven light glass (Fan forced models only)
1. Make sure that the cooker is turned off.
2. Turn the oven light glass anti-clockwise
(see diagram below).
NOTE: The fan cover and oven burner cover are not
removable for cleaning. Accidental spills should be cleaned
immediately so that the burner does not become blocked.
Cleaning the door glass
To help with cleaning the door your cooker has a removable
inner door glass.
1. First open the oven door to access inner door glass screws.
2. Undo the screws on either side of the door and remove
the 2 glass retaining plates and rubber pads.
3. Remove the inner glass and clean in hot soapy water.
4. The inside of the outer glass can also be wiped clean.
5. When reassembling do not overtighten the retaining
plate screw.
WARNING
Make sure the appliance is turned off before you remove
or replace parts, to avoid the possibility of electric shock.
CLEANING
21
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 21
28/06/11 12:07 PM
SOLVING PROBLEMS
If you have a problem with your appliance, check the table
If you need more information, please contact the
below before calling service. You may be able to avoid a service Customer Care Centre on:
call by fixing the problem yourself – and so continue cooking.
NOTE: You may be charged for the service call even in the
guarantee period if the problem is due to the causes listed below.
Australia 1300 363 640
(Centre is open 8am – 5pm Monday to Friday EST) or
If you need information, service or replacement parts please:
Quote 1. Model Number, 2. Serial Number
You can find these on the data plate which can be seen
when the oven door is open.
New Zealand 09 573 2384
(Centre is open 8am – 5pm Monday to Friday)
If you have a warranty or spare parts enquiry, you should
call the number listed on the back page.
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
No spark obtained when electronic igniter • Power not turned on
• Switch on electricity
• Check fuses
• Check circuit breaker
is pressed (gas cooker only)
• Household fuse blown
• Circuit breaker tripped
• Spark plug is wet or dirty
• Dry or clean spark plug
No spark obtained when manual igniter
is pressed (gas cooker only)
• Spark plug is wet or dirty
• Dry or clean spark plug
Burner will not light even though igniter
is working (gas cooker only)
• Gas supply valve is turned off
• Port blockage in ignition area
• Turn on gas supply
• Make sure that ports and ignition area
are clean and dry
Oven or grill not working
(electric cooker only)
NOTE: if the household fuse continues
to blow, call the Service Centre
• Clock not set
• Refer to clock instructions pg 17
• Switch on electricity
• Check fuses
• Reset controls
• Check circuit breaker
• Power not turned on
• Household fuse blown
• Controls incorrectly set
• Circuit breaker tripped
Oven not working (electric cooker only)
NOTE: if the household fuse continues
to blow, call the Service Centre
• Clock program set
• Household fuse blown
• Cancel program, see pg 18
• Check fuses
Oven light not working
NOTE: if the household fuse continues
to blow, call the Service Centre
• Power not turned on
• Switch on electricity
• Check fuses
• Check circuit breaker
• Replace or tighten globe pg 20
• Household fuse blown
• Circuit breaker tripped
• Lamp blown or loose in socket
Oven not heating enough
• Foil or trays on bottom of oven
• Heat escaping through incorrectly
sealed door
• Remove foil or trays
• Check door is properly closed
• The set oven temperature is incorrect
• Change set oven temperature
Electronic clock flashing on display
(electric cooker only)
NOTE: if the household fuse continues
to blow, call the Service Centre
• Power failure or interruption
• Household fuse blown or power supply
is off
• Reset time of day
• Check fuses, power supply
Unit smoking when first used
• Protective oils being removed
• Turn grill on high for 10 minutes
• Turn oven on high for 10 minutes
Condensation building up
• Too much water used when cooking
• Reduce amount of water
• Leave door open after cooking, if food
is to be left in oven to keep warm
Odours on first use of oven
60 minute timer not audible
• This is normal
• Turn timer knob past 15 minute mark then to
• Timer not wound sufficiently
the required number of minutes, see pg 17
Oven shelf tight
• Oven shelf not inserted correctly,
• Remove shelf and insert as
may be upside down or back to front
per diagram pg 7
Clock display off
NOTE: if the household fuse continues
to blow, call the Service Centre
• Display switched off
• Household fuse blown or power supply
is off
• To switch display on refer to pg 18
• Check fuses, power supply
Note: Only authorised service centres should carry out servicing. Otherwise warranty may be void.
SOLVING PROBLEMS
22
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 22
28/06/11 12:07 PM
INSTALLING THE ELECTRIC COOKER
SAFETY WARNINGS ABOUT INSTALLATION
Wiring requirements
The cooker MUST be installed in compliance with
•
•
Wiring connections in AS/NZS 3000 Wiring Rules
Local regulations, municipal building codes and other
statutory regulations
WARNING
•
•
•
The cooker MUST be installed and serviced by
a qualified technician.
A Certificate of Compliance MUST be supplied
to be kept by the customer.
The packing materials MUST be removed before
you install the cooker.
You MUST follow the installation instructions in this booklet.
The surrounding kitchen cabinets MUST be able to
withstand 85°C. Electrolux Products WILL NOT accept
responsibility for damage caused by installation into
kitchen cabinets which cannot withstand 85°C.
The vents, openings and air spaces MUST NOT
be blocked.
You MUST NOT pull the cooker by the door handles
or the splashback.
The cooker MUST be checked every five years.
Data plate
• gives information about rating
• is located on the inside panel
of the grill door
•
•
Circuit diagram
• is located on the back panel
of the control panel
•
An all pole disconnect functional switch MUST be
provided near the appliance in an accessible position
(AS/NZS 3000 – Clause 4.7.1).
Wiring MUST be protected against mechanical failure
(AS/NZS 3000 – Clause 3.9).
A means of disconnection with a contact separation
of at least 3mm MUST be supplied in the fixed wiring.
•
•
•
•
•
Note: To gain access to the terminal block, remove the rear
panel by unscrewing the two assembly screws.
Locating the cooker
Study the diagrams below to be sure of the dimensions
required to locate the cooker safely.
Note: Make sure that the top of the hotplate surface is
at least 10 mm higher than the level of the benchtops.
WARNING
When connections are made to a multi-phase 240V supply,
the bridge piece should be removed from between the
active connections.
TIPS & INFORMATION
Before you cook in your new oven it is important that
the protective oils used in the manufacture of the product
be removed.
•
Make sure that the room is well ventilated (to allow
smoke to escape).
•
•
Run the grill on high for 30 minutes, without grill dish.
Then run the oven on 180°C for 2 hours.
INSTALLING
23
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 23
28/06/11 12:07 PM
INSTALLING THE GAS COOKER
SAFETY WARNINGS ABOUT INSTALLATION
Checking gas pressures
The cooker MUST be installed in compliance with:
•
The Installation Code for Gas Burning Appliances
and Equipment – AS 5601/AG 601 – issued by
Standards Australia (Particular reference to sections
4.8 & 5.12.1).
Local gas fitting regulations, municipal building codes
and other statutory regulations.
WARNING
•
•
•
The cooker MUST be installed and serviced by
a qualified technician.
A Certificate of Compliance MUST be supplied
to be kept by the customer.
The packing materials MUST be removed before
you install the cooker.
You MUST follow the installation instructions in this booklet.
The surrounding kitchen cabinets MUST be able to
withstand 85°C. Electrolux Products WILL NOT accept
responsibility for damage caused by installation into
kitchen cabinets which cannot withstand 85°C.
The appliance MUST be installed using the flexible
hose supplied.
•
The cookers come in two gas types: Natural gas and Propane.
Before installation check that the cooker is suitable for the
gas supply. To do this check the gas type on the carton sticker
or on the data plate behind the bottom of the oven door.
•
•
The following table shows the supply and operating
pressures for various gas supplies.
•
•
•
GAS TYPE
NATURAL GAS
PROPANE
The vents, openings and air spaces MUST NOT
be blocked.
You MUST NOT pull the cooker by the door handles
or the splashback.
The cooker MUST be checked every five years.
The cooker MUST NOT be used as a space heater.
Supply Pressure
at inlet to appliance
regulator (if fitted)
1.13 (kPa)
2.75* (kPa)
Minimum
Operating Pressure
at appliance test point
1.00 (kPa)
2.75 (kPa)
•
•
*If the regulator is placed upstream of the cooker inlet, as is
normal for cookers operating on Propane, then the supply
pressure and operating pressure are the same.
Locating the cooker
Study the diagrams below to be sure of the dimensions
required to locate the cooker safely.
Note: Make sure that the top of the hotplate surface is
at least 10 mm higher than the level of the benchtops.
The following table shows the injector sizes for each burner.
INJECTOR ORIFICE
NATURAL GAS
1.00 mm
1.35 mm
1.60 mm
1.50 mm
1.60 mm
0.73 mm
PROPANE
Low Heat Burner
0.62 mm
0.82 mm
0.95 mm
0.82 mm
0.95 mm
0.45 mm
Medium Heat Burner
High Heat Burner
Grill – main injector
Oven – main injector
Oven – bypass screw
Checking pipe size
To work out a suitable pipe size for connection use the
information in the table below.
GAS TYPE
NATURAL GAS
PROPANE
ꢀꢁꢂP
Hourly gas consumption 57.2 MJ/h
for this cooker
56.5 MJ/h
•
Information about the length of the run, number of
elbows, tees and bends, the available service pressure
and the supply requirements.
TIPS & INFORMATION
Before you cook in your new oven it is important that
the protective oils used in the manufacture of the product
be removed.
NOTE: The Code AS 5601/AG 601 will help you with
this matter.
•
•
•
Make sure that the room is well ventilated (to allow
smoke to escape).
Run the grill on high for 15 minutes with 10mm
of water in the bottom of the grill dish.
Then run the oven on 180°C for 2 hours.
INSTALLING
24
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 24
28/06/11 12:07 PM
INSTALLING THE GAS COOKER
(continued)
Gas connection
Operation on SNG
Read these points before connecting to the gas supply:
•
If the cooker is to be used with SNG, then the grill
•
The cooker inlet connection point is the inlet to the
regulator or LP test point adaptor. This connects to the
flexible hose fitted to the appliance. The appliance
must be installed using the hose supplied.
The regulator/inlet connection must be accessible
when the appliance is installed.
burner MUST be modified by the replacement of the
shutter which fits into the throat of the grill burner.
You can buy the kit for this modification from your
nearest spare parts stockist. (refer to rear cover for
contact details.)
•
•
1. Remove the control panel. Remove the existing
NG shutter securing screws (as in diagram) and
slide upwards to disengage from grill burner.
2. Slide the SNG shutter into position and secure
with screws.
Operation on NG/SNG
Read these points about operation on NG/SNG and look
carefully at the diagram:
•
•
•
•
The appliance regulator provided MUST be fitted and
positioned so that the pressure nipple is accessible.
The arrow showing the direction of the flow MUST be
pointed correctly.
Connect the gas supply to the 1/2” BSP internal thread
inlet of the regulator.
The flat fibre washer provided with the regulator MUST
be used when making the gas connection.
Grill Shutter
Operation on Propane
An inlet fitting with pressure test point is provided.
Orient the fitting so that gas flows in the direction of the
arrow marked on the fitting. Use the sealing washer to
connect the fitting to the flexible hose. Connect the gas
supply to the 1/2” BSP internal thread inlet of the fitting.
INSTALLING
25
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 25
28/06/11 12:07 PM
TESTING THE OPERATION OF THE GAS COOKER
Testing appliance operation
Checking the Function of the Regulator
(Apparatus: manometer and connecting tube)
After installation, test the appliance and ensure that it
operates correctly, before handing it over to the customer.
The following procedure is recommended:
The operation of the regulator can be confirmed by
connecting a manometer to the pressure test point located
on the side of the regulator body adjacent to the outlet.
With the appliance operating check the outlet pressure:
1. When all burners of the appliance are operating
at maximum,
2. When the smallest burner of the appliance is operating
at minimum.
Under these conditions the outlet pressure should not vary
from the nominal outlet pressure by more than 20% of
the nominal outlet pressure (ie 0.20kPa for Natural Gas).
If the regulator appears to not be performing satisfactorily
then check the following points.
1. If the outlet pressure is consistently too low then the
inlet pressure may be too low and adjustment of an
upstream regulator may be needed, or an upstream
regulator or valve with insufficient flow capacity may
be present in the gas supply line. If this is suspected
then it may be necessary to repeat the checks whilst
measuring both the inlet and outlet pressure to determine
if the inlet pressure is in the range 1.13 – 5kPa.
2. Check that the regulator has been fitted to the gas
supply line in the correct orientation, the arrow on the
base of the body indicates the direction of gas flow.
Once these checks have been completed, if the regulator still
fails to perform in a satisfactory manner it should be replaced.
•
•
•
Check that the manometer zero point is correct; then
connect the manometer to the appliance pressure test
point. This is located on the Regulator or L.P.G. Inlet
Fitting behind the kick panel (or under the Storage
Drawer where fitted).
Turn on the gas supply and electricity (if applicable)
and attempt ignition. (For correct procedure, refer to the
Ignition Instructions.) Note that additional time needs
to be allowed for the initial lighting as air has to be
purged from the pipes.
Check the operating pressure for the particular
gas-type, as given in the Table on page 23.
For L.P.G. appliances, the regulator in question may be
remote from the appliance.
For Natural Gas appliances
Regulators are supplied pre-adjusted and configured by the
component maker for use with Natural Gas. The appliance
installer is not required to make an adjustment to obtain the
correct outlet pressure setting.
An arrow on the base of the regulator indicates the direction
of gas flow when the inlet and outlet of the regulator are
orientated correctly. When the regulator has been fitted
check for leaks from the connections with soapy water.
TESTING
26
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 26
28/06/11 12:07 PM
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: BUILT-IN OVEN, COOKTOP
AND FREESTANDING COOKER
This document sets out the terms and conditions of the product
warranties for Electrolux Appliances. It is an important document.
Please keep it with your proof of purchase documents in a safe place
for future reference should you require service for your Appliance.
1. In this warranty
6. Proof of purchase is required before you can make a claim under
this warranty.
7. You may not make a claim under this warranty unless the defect claimed
is due to faulty or defective parts or workmanship. Electrolux is not liable
in the following situations (which are not exhaustive):
(a) ‘acceptable quality’ as referred to in clause 10 of this warranty has
the same meaning referred to in the ACL;
(a) the Appliance is damaged by:
(i) accident
(b) ‘ACL’ means Trade Practices Amendment (Australian Consumer
Law) Act (No.2) 2010;
(ii) misuse or abuse, including failure to properly maintain or service
(iii) normal wear and tear
(c) ‘Appliance’ means any Electrolux product purchased by you
accompanied by this document;
(iv) power surges, electrical storm damage or incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(d) ‘ASC’ means Electrolux’ authorised serviced centres;
(e) ‘Electrolux’ means Electrolux Home Products Pty Ltd of 163
O’Riordan Street, Mascot, NSW 2020, ABN 51 004 762 341 in
respect of Appliances purchased in Australia and Electrolux (NZ)
Limited of 3-5 Niall Burgess Road, Mount Wellington, in respect
of Appliances purchased in New Zealand;
(viii) failure to comply with any additional instructions supplied with
the Appliance;
(b) the Appliance is modified without authority from Electrolux in writing;
(f) ‘major failure’ as referred to in clause 10 of this warranty has the
same meaning referred to in the ACL and includes a situation when
an Appliance cannot be repaired or it is uneconomic for Electrolux, at
its discretion, to repair an Appliance during the Warranty Period;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced;
(d) the Appliance was serviced or repaired by anyone other than
Electrolux, an authorised repairer or ASC.
(g) ‘Warranty Period’ means:
8. This warranty, the contract to which it relates and the relationship
between you and Electrolux are governed by the law applicable where
the Appliance was purchased. Where the Appliance was purchased in
New Zealand for business purposes the Consumer Guarantee Act does
not apply.
(i) where the Appliance is used for personal, domestic or household
use (i.e. normal single family use) as set out in the instruction
manual, the Appliance is warranted against manufacturing
defects in Australia for 24 months and in New Zealand for 24
months, following the date of original purchase of the Appliance;
9. To the extent permitted by law, Electrolux excludes all warranties and
liabilities (other than as contained in this document) including liability for
any loss or damage whether direct or indirect arising from your purchase,
use or non use of the Appliance.
(ii) where the Appliance is used for commercial purposes (including
being used to directly assist a business or where the Appliance is
used in a multi-family communal or share type environment), the
Appliance will then be warranted against manufacturing defects
in Australia for 3 months and in New Zealand for 3 months,
following the date of original purchase of the Appliance.
10. For Appliances and services provided by Electrolux in Australia,
the Appliances come with a guarantee by Electrolux that cannot be
excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to
have the Appliance repaired or replaced if the Appliance fails to be of
acceptable quality and the failure does not amount to a major failure.
The benefits to you given by this warranty are in addition to your other
rights and remedies under a law in relation to the Appliances or services
to which the warranty relates.
(h) ‘you’ means the purchaser of the Appliance not having purchased
the Appliance for re-sale, and ‘your’ has a corresponding meaning.
2. This warranty only applies to Appliances purchased and used in Australia
or New Zealand and is in addition to (and does not exclude, restrict, or
modify in any way) any non-excludable statutory warranties in Australia
or New Zealand.
3. During the Warranty Period Electrolux or its ASC will, at no extra charge
if your Appliance is readily accessible for service, without special
equipment and subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Electrolux or its ASC may
use remanufactured parts to repair your Appliance. You agree that
any replaced Appliances or parts become the property of Electrolux.
This warranty does not apply to light globes, batteries, filters or similar
perishable parts.
11. At all times during the Warranty Period, Electrolux shall, at its discretion,
determine whether repair, replacement or refund will apply if an
Appliance has a valid warranty claim applicable to it.
12. For Appliances and services provided by Electrolux in New Zealand,
the Appliances come with a guarantee by Electrolux pursuant to the
provisions of the Consumer Guarantees Act, the Sale of Goods Act and
the Fair Trading Act.
4. Parts and Appliances not supplied by Electrolux are not covered by
this warranty.
13. To enquire about claiming under this warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms
of this warranty;
5. You will bear the cost of transportation, travel and delivery of the
Appliance to and from Electrolux or its ASC. If you reside outside of the
service area, you will bear the cost of:
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (eg an invoice) available;
(d) telephone the numbers shown below.
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and from Electrolux or
its ASC,
14. You accept that if you make a warranty claim, Electrolux and its ASC
may exchange information in relation to you to enable Electrolux to meet
its obligations under this warranty.
In all instances, unless the Appliance is transported by Electrolux or an
Electrolux authorised representative, the Appliance is transported at the
owner’s cost and risk while in transit to and from Electrolux or its ASC.
Important Notice
Before calling for service, please ensure that the steps listed in point 13 above have been followed.
FOR SERVICE
SERVICE AUSTRALIA
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in Australia
PLEASE CALL 13 13 50
or to find the address of your nearest
state service centre in Australia
PLEASE CALL 13 13 49
ELECTROLUX HOME PRODUCTS
For the cost of a local call (Australia only)
For the cost of a local call (Australia only)
FOR SERVICE
or to find the address of your nearest
authorised service centre in New Zealand
FREE CALL 0800 10 66 10
(New Zealand only)
SERVICE NEW ZEALAND
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
(New Zealand only)
ELECTROLUX HOME PRODUCTS
GOV_Warr_Apr11
WARRANTY
27
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 27
28/06/11 12:07 PM
For more information on all Westinghouse appliances,
or for dimension and installation information, call into your retailer,
phone or email our customer care team or visit our website:
AUSTRALIA
phone: 1300 363 640
fax:
email: [email protected]
1800 350 067
NEW ZEALAND
phone: 09 573 2384
fax:
email: [email protected]
0800 363 600
TOP SERVICE
Top Service encompasses the after sales service
provided by The Electrolux Group to consumers
including delivery, home service and spare parts.
Westinghouse. We are part of the Electrolux family.
P/No. 342 001 568 ECN 11A086C
© 2011 Electrolux Home Products Pty Ltd
ABN 51 004 762 341
Print code: WMAN_540 Upright_Jun11
Download from Www.Somanuals.com. All Manuals Search And Download.
WMAN_540 Upright_Jun11.indd 28
28/06/11 12:07 PM
|