Weslo Treadmill WLTL34300 User Manual

Model No. WLTL34305.0  
Serial No.  
USER'S MANUAL  
Serial Number  
Decal  
QUESTIONS?  
As a manufacturer, we are com-  
mitted to providing complete  
customer satisfaction. If you  
have questions, or if parts are  
damaged or missing, PLEASE  
CONTACT OUR CUSTOMER  
SERVICE DEPARTMENT DI-  
RECTLY.  
CALL TOLL-FREE:  
1-866-699-3756  
Mon.–Fri., 6 a.m.–6 p.m. MST  
ON THE WEB:  
CAUTION  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Save this manual  
for future reference.  
Visit our website at  
new products, prizes,  
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. Never move the walking belt while the power  
is turned off. Do not operate the treadmill if  
the power cord or plug is damaged, or if the  
treadmill is not working properly. (See TROU-  
BLESHOOTING on page 13 if the treadmill is  
not working properly.)  
You must be able to safely lift 45 pounds (20  
kg) to raise, lower, or move the treadmill.  
20. When folding or moving the treadmill, make  
sure that the storage latch is fully closed.  
21. Inspect and properly tighten all parts of the  
treadmill regularly.  
16. Never start the treadmill while you are stand-  
ing on the walking belt. Always hold the  
handrails while using the treadmill.  
22. Never insert any object into any opening.  
23.  
DANGER:  
Always unplug the power  
17. The treadmill is capable of high speeds.  
Adjust the speed in small increments to avoid  
sudden jumps in speed.  
cord immediately after use, before cleaning  
the treadmill, and before performing the main-  
tenance and adjustment procedures de-  
scribed in this manual. Never remove the  
motor hood unless instructed to do so by an  
authorized service representative. Servicing  
other than the procedures in this manual  
should be performed by an authorized service  
representative only.  
18. Never leave the treadmill unattended while it  
is running. Always remove the key, unplug  
the power cord and move the reset/off circuit  
breaker to the off position when the treadmill  
is not in use. (See the drawing on page 4 for  
the location of the circuit breaker.)  
19. Do not attempt to raise, lower, or move the  
treadmill until it is properly assembled. (See  
ASSEMBLY on page 5, and HOW TO FOLD  
AND MOVE THE TREADMILL on page 12.)  
24. This treadmill is intended for in-home use  
only. Do not use this treadmill in a commer-  
cial, rental, or institutional setting.  
WARNING:  
Before beginning this or any exercise program, consult your physician. This  
is especially important for persons over the age of 35 or persons with pre-existing health problems.  
Read all instructions before using. ICON assumes no responsibility for personal injury or property  
damage sustained by or through the use of this product.  
SAVE THESE INSTRUCTIONS  
The decals shown here have been placed on  
your treadmill. If a decal is missing, or if it is  
not legible, please call the toll-free telephone  
number on the front cover of this manual  
and order a free replacement decal. Apply  
the decal in the location shown.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
Thank you for selecting the WESLO® CADENCE C66  
treadmill. The CADENCE C66 treadmill combines  
advanced technology with innovative design to let you  
enjoy an excellent form of cardiovascular exercise in  
the convenience and privacy of your home. And when  
you’re not exercising, the unique CADENCE C66 can  
be folded up, requiring less than half the floor space of  
other treadmills.  
manual. To help us assist you, note the product model  
number and serial number before calling. The model  
number of the treadmill is WLTL34305.0. The serial  
number can be found on a decal attached to the tread-  
mill (see the front cover of this manual for the location).  
To avoid a registration fee for any service needed  
under warranty, you must register the treadmill at  
For your benefit, read this manual carefully before  
you use the treadmill. If you have questions after  
reading this manual, please see the front cover of this  
Before reading further, please review the drawing  
below and familiarize yourself with the labeled parts.  
Bookrack  
Console  
Water Bottle Holder  
(Bottle not included)  
Key/Clip  
Upright  
Storage Latch  
Handrail  
RIGHT SIDE  
Reset/Off  
Circuit Breaker  
Walking Belt  
Foot Rail  
Power Cord  
Cushioned Walking Platform  
for maximum exercise comfort  
BACK  
Rear Roller  
Adjustment Bolts  
Incline Leg  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.  
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not  
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is  
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top  
of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If  
there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive  
cleaner.  
Assembly requires the included allen wrenches  
wire cutters , adjustable wrench  
and your own phillips screwdriver  
, and needlenose pliers  
,
.
To identify the assembly hardware, see the PART IDENTIFICATION CHART in the center of this manual.  
1. Make sure that the power cord is unplugged.  
1
40  
102  
36  
37  
38  
75  
40  
102  
With the help of a second person, carefully tip the tread-  
mill onto its left side as shown. Partially fold the Frame  
(75) so the treadmill is more stable. Do not fully fold the  
treadmill until it is completely assembled.  
40  
102  
Attach four Base Pads (40) to the Base (11) with four 1”  
Tek Screws (102). Attach a Wheel (37) to the right side  
of the Base with a Wheel Bolt (36) and a Wheel Nut (38).  
Do not overtighten the Wheel Bolts; the Wheels  
should turn freely.  
40  
102  
11  
2. See drawing 2a. Make sure that there are two U-nuts  
2
76  
(57) in the bottom of each Upright (62, 76).  
Identify the Right Upright (62), which has a large round  
hole and a slot near the lower end. While a second per-  
son holds the Right Upright near the Wire Harness (21),  
insert the end of the Wire Harness into the round hole  
and out of the upper end of the Right Upright.  
21  
62  
Slot  
Round Hole  
18  
Slide the slot in the Right Upright (62) onto the Upright  
Lock Bracket (18) (see drawing 2b); slide the Right Upright  
down until it reaches the Base (11). Make sure that the  
Wire Harness (21) is not pinched. Attach the Right  
Upright to the Base with two 2 1/4” Bolts (78) and two  
5/16” Star Washers (20).  
20  
78  
11  
2a  
2b  
18  
62  
76, 62  
With the help of a second person, tip the treadmill onto  
its other side. Attach the Left Upright (76) as described  
above. (Note: There is not a wire harness on the left  
side.) Attach the other Wheel (not shown) to the Base  
(11) as described in step 1.  
Side  
View  
57  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. With the help of a second person, position the treadmill  
with the Uprights (62, 76) in the vertical position as  
shown.  
3
21  
Large  
Hole  
Route the Wire Harness (21) through the bracket on the  
Right Handrail (47) and out the large hole on the side of  
the Right Handrail. Insert the bracket on the Right  
Handrail into the top of the Right Upright (62). Attach the  
Right Handrail with two 1” Bolts (8) and two 1/4” Star  
Washers (9) as shown. Do not tighten the Bolts yet.  
Bracket  
76  
47  
8
9
Attach the Left Handrail (not shown) as described above.  
Note: There is not a wire harness on the left side.  
62  
8
9
4. Hold the Crossbar (34) between the Handrails (1, 47).  
Attach the Crossbar with two Crossbar Screws (53) and  
two Crossbar Star Washers (88). Do not tighten the  
Crossbar Screws yet.  
4
46  
10  
88  
1
47  
Hold the Console (10) and the Console Base (46) near the  
Handrails (1, 47). See the inset drawing. Route the  
ground wire (A) from the Console Base through the open-  
ing at the side of the Console Cover (96). Next, route the  
ground Wire through the two indicated plastic ties on the  
Console Base.  
91  
53  
34  
96  
A
88  
53  
A
Attach the end of the ground wire (A) to the small hole in  
the side of the Right Handrail (47) with a Silver Ground  
Screw (91).  
Ties  
5. Place the Console Base (46) on the Right Handrail (47)  
and the Left Handrail (not shown). Attach the Console  
Base with four 3/4” Screws (13) (only two Screws are  
shown). Do not tighten the Screws yet.  
5
46  
21  
Insert the Wire Harness (21) through the two indicated  
plastic ties on the Console Base (46). Next, insert the  
Wire Harness up through the indicated opening in the  
Console Base. Make sure that the Console Cover (96) is  
securely attached to the Console Base.  
96  
Ties  
47  
13  
See the inset drawing. Look at the top of the Console  
Base (46). Insert the Wire Harness (21) through the plas-  
tic tie on top of the Console Base.  
21  
Tie  
46  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Touch the Right Upright (62) to discharge any static.  
Insert the connector on the end of the Wire Harness (21) into  
the socket beneath the console. The connector should  
slide easily into the socket and snap into place. If the  
connector does not slide easily and snap into place, turn the  
connector and then insert it. Make sure that the connec-  
tors and wires appear as shown in drawing 6a.  
21  
6
10  
Ties  
46  
Next, insert the excess Wire Harness (21) down through  
the opening in the Console Base (46). See the inset draw-  
ing in step 5. Securely tighten the plastic tie on top of  
the Console Base to prevent the Wire Harness from  
slipping. Then, cut off the end of the plastic tie. See draw-  
ing 6b. Press the Bookrack (90) onto the Console Base in  
the location shown.  
97  
97  
97  
47  
13  
90  
13  
62  
6a  
6b  
Set the Console (10) on the Console Base (46). Insert the ex-  
cess Wire Harness (21) into the large hole in the side of the  
Right Handrail (47). Securely tighten the plastic ties on the  
bottom of the Console Base to prevent the Wire Harness  
from slipping. Then, cut off the ends of the plastic ties.  
21  
7
46  
Connector  
Attach the Console (10) to the Console Base (46) with four  
1/2” Screws (97) and two 3/4” Screws (13). Start all six  
Screws before tightening any of them; do not over-  
tighten the Screws.  
62, 76  
78  
47  
7. Lower the Uprights (62, 76) until the Handrails (47) are  
touching the floor.  
See the lower drawing. Position the Uprights (62, 76) so  
the treadmill Frame (75) is centered between them.  
Top View  
Firmly tighten the four 2 1/4” Bolts (78) and all other  
bolts and screws used in assembly steps 3, 4, 5, and 6.  
62  
8
76  
75  
8. Attach the Storage Latch (14) to the left Upright (76) with two  
3/4” Screws (13). Be careful not to overtighten the Screws.  
13  
14  
1
76  
9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may  
be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the  
walking belt (see page 14). To protect the floor or carpet, place a mat under the treadmill.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION AND ADJUSTMENT  
THE PRE-LUBRICATED WALKING BELT  
tric shock. This product is equipped with a cord having  
an equipment-grounding conductor and a grounding  
plug. Plug the power cord into a surge suppressor,  
and plug the surge suppressor into an appropriate  
outlet that is properly installed and grounded in  
accordance with all local codes and ordinances.  
Important: The treadmill is not compatible with  
GFCI-equipped outlets.  
Your treadmill features a walking belt coated with high-  
performance lubricant. IMPORTANT: Never apply sil-  
icone spray or other substances to the walking  
belt or the walking platform. Such substances will  
deteriorate the walking belt and cause excessive  
wear.  
HOW TO PLUG IN THE POWER CORD  
This product is for use on a nominal 120-volt circuit,  
and has a grounding plug that looks like the plug illus-  
trated in drawing 1 below. A temporary adapter that  
looks like the adapter illustrated in drawing 2 may be  
used to connect the surge suppressor to a 2-pole  
receptacle as shown in drawing 2 if a properly  
grounded outlet is not available.  
DANGER:  
Improper connection  
of the equipment-grounding conductor can  
result in an increased risk of electric shock.  
Check with a qualified electrician or service-  
man if you are in doubt as to whether the  
product is properly grounded. Do not modify  
the plug provided with the product—if it will  
not fit the outlet, have a proper outlet  
1
Grounded Outlet Box  
Surge Suppressor  
Grounding Pin  
installed by a qualified electrician.  
Your treadmill, like any other type of sophisticated  
electronic equipment, can be seriously damaged by  
sudden voltage changes in your home’s power.  
Voltage surges, spikes, and noise interference can  
result from weather conditions or from other appliances  
being turned on or off. To decrease the possibility of  
your treadmill being damaged, always use a surge  
suppressor with your treadmill (see drawing 1 at  
the right). To purchase a surge suppressor, see  
your local WESLO dealer or call the toll-free tele-  
phone number on the front cover of this manual  
and order part number 146148, or see your local  
electronics store.  
Grounding Pin  
Grounded Outlet  
Grounding Plug  
2
Grounded Outlet Box  
Adapter  
Surge Suppressor  
Use only a single-outlet surge suppressor that is  
UL 1449 listed as a transient voltage surge sup-  
pressor (TVSS). The surge suppressor must have a  
UL suppressed voltage rating of 400 volts or less  
and a minimum surge dissipation of 450 joules.  
The surge suppressor must be electrically rated for  
120 volts AC and 15 amps. There must be a moni-  
toring light on the surge suppressor to indicate  
whether it is functioning properly. Failure to use a  
properly functioning surge suppressor could result  
in damage to the control system of the treadmill. If  
the control system is damaged, the walking belt  
may change speed, accelerate or stop unexpect-  
edly, which may result in a fall and serious injury.  
Lug  
Metal Screw  
The temporary adapter should be used only until a  
properly grounded outlet (drawing 1) can be installed  
by a qualified electrician.  
The green-colored rigid ear, lug, or the like extending  
from the adapter must be connected to a permanent  
ground such as a properly grounded outlet box cover.  
Whenever the adapter is used it must be held in place  
by a metal screw. Some 2-pole receptacle outlet box  
covers are not grounded. Contact a qualified elec-  
trician to determine if the outlet box cover is  
grounded before using an adapter.  
This product must be grounded. If it should malfunc-  
tion or break down, grounding provides a path of least  
resistance for electric current to reduce the risk of elec-  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONSOLE DIAGRAM  
Pulse  
Sensor  
Note: If there is a thin sheet of plastic  
on the console, remove the plastic.  
Key  
Clip  
FEATURES OF THE CONSOLE  
Start the walking belt.  
To start the walking belt, press the Speed in-  
crease button or one of the ten numbered buttons.  
2
The treadmill console offers a selection of features  
designed to make your workouts more effective.  
During each workout, you can change the speed and  
incline of the treadmill with the touch of a button. As  
you exercise, the console will display continuous exer-  
cise feedback; you can even measure your heart rate  
using the built-in pulse sensor.  
If the Speed increase button is pressed, the walk-  
ing belt will begin to  
move at 1 mph. As you  
exercise, change the  
speed of the walking  
belt as desired by  
pressing the Speed in-  
HOW TO OPERATE THE CONSOLE  
crease and decrease buttons. Each time a button  
is pressed, the speed setting will change in incre-  
ments of 0.1 mph; if a button is held down, the  
speed setting will change in increments of 0.5  
mph. Note: After the buttons are pressed, it may  
take a moment for the walking belt to reach the se-  
lected speed setting.  
Insert the key into the console.  
1
Plug in the power cord  
(see page 8). Next, lo-  
cate the reset/off cir-  
cuit breaker on the  
treadmill frame near  
the power cord. Make  
Reset  
If one of the ten numbered buttons is pressed, the  
walking belt will gradually increase in speed until it  
reaches the selected speed setting.  
sure that the circuit breaker is in the “reset” posi-  
tion.  
Next, stand on the foot rails of the treadmill. Locate  
the clip attached to the key (see the drawing  
above), and slide the clip securely onto the waist-  
band of your clothes. Then, insert the key into the  
console. After a moment, the displays will light.  
Important: In an emergency situation, the key  
can be pulled from the console, causing the  
walking belt to slow to a stop. Test the clip by  
carefully taking a few steps backward until the  
key is pulled from the console. If the key is not  
pulled from the console, adjust the position of  
the clip as needed.  
To stop the walking belt, press the Stop button.  
The time will begin to flash in the left display. To  
restart the walking belt, press the Speed increase  
button or one of the ten numbered buttons.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Change the incline of the treadmill as desired.  
Measure your heart rate if desired.  
3
4
5
To change the incline of the treadmill, press the  
Incline increase or decrease button until the de-  
sired incline level is reached.  
To measure your heart  
rate, stand on the foot  
rails and place your  
right thumb on the  
pulse sensor (see the  
drawing at the top of  
page 9). Do not press too hard, or the circula-  
tion in your thumb will be restricted and your  
pulse may not be detected. When your pulse is  
detected, a heart-shaped indicator in the right dis-  
play will flash each time your heart beats, one or  
two dashes will appear, and then your heart rate  
will be shown. For the most accurate heart rate  
reading, hold your thumb on the pulse sensor  
for at least 15 seconds.  
Follow your progress with the three displays.  
The left display—The  
left display will show  
the elapsed time and  
the distance that you  
have walked or run  
during your workout.  
The display will change from time to distance  
every few seconds.  
Note: The console can display distance and  
speed in either miles or kilometers, as shown by  
the letters MPH or Km/H in the right display. To  
change the unit of measurement, see THE IN-  
FORMATION MODE/DEMO MODE on page 11.  
For simplicity, all instructions in this section  
refer to miles.  
If the displayed heart rate appears to be too high  
or too low, or if your heart rate is not displayed, lift  
your thumb for a few seconds, and then reposition  
your thumb on the pulse sensor. Remember to  
stand still while measuring your heart rate.  
When you are finished, remove the key.  
6
The center display—  
The center display will  
show the approximate  
number of calories you  
have burned during  
your workout.  
Step onto the foot rails, press the Stop button, and  
adjust the incline of the treadmill to the lowest  
setting. The incline must be at the lowest setting  
or the treadmill will become damaged when it is  
folded to the storage position. Next, remove the  
key from the console and put it in a secure place.  
Note: If the displays remain lit, the console is in  
the “demo” mode. See page 11 and turn off the  
demo mode.  
The right display—  
The right display will  
show the speed of the  
walking belt. The dis-  
play will also show  
Switch the reset/off circuit breaker to the “off” posi-  
tion and unplug the power cord.  
your heart rate when  
you use the pulse sensor.  
To reset the displays, press the Stop button, re-  
move the key, and then reinsert the key.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE INFORMATION MODE/DEMO MODE  
The right display will show  
An “E” (for English) or an “M”  
(for metric). Press the Speed  
increase button to change  
the unit of measurement, if  
desired.  
The console features an information mode that keeps  
track of treadmill usage information and allows you to  
select a unit of measurement for the console.  
To select the information mode, hold down the Stop  
button and insert the key into the console. Next, re-  
lease the Stop button. When the information mode is  
selected, the following information will be shown:  
IMPORTANT: If a “d” ap-  
pears in the right display, the  
console is in the “demo”  
mode. This mode is intended  
The left display will show the  
total number of hours that  
the treadmill has been used.  
to be used only when a  
treadmill is displayed in a store. When the console is in  
the demo mode, the power cord can be plugged in, the  
key can be removed from the console, and the displays  
will remain lit, although the buttons will not operate. If a  
“d” appears when the information mode is selected,  
press the Speed decrease button so the “d” disap-  
pears.  
The center display will show  
the total number of miles (or  
kilometers) that the walking  
belt has moved.  
To exit the information mode, remove the key from the  
console.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO FOLD AND MOVE THE TREADMILL  
HOW TO FOLD THE TREADMILL FOR STORAGE  
1
Before folding the treadmill, unplug the power cord. CAUTION:  
You must be able to safely lift 45 pounds (20 kg) to raise,  
lower, or move the treadmill.  
1. Hold the treadmill with your hands in the location shown by  
the arrow at the right. To decrease the possibility of injury,  
bend your legs and keep your back straight. As you raise  
the frame, make sure to lift with your legs rather than  
your back. Raise the frame about halfway to the vertical po-  
sition.  
2. Move your right hand to the position shown and hold the  
2
treadmill firmly. Using your left thumb, press the storage latch  
to the left. Raise the treadmill until the storage latch closes  
over the catch. Make sure that the storage latch is fully  
engaged over the catch.  
To protect the floor or carpet from damage, place a mat  
under the treadmill. Keep the treadmill out of direct sun-  
light. Do not leave the treadmill in the storage position in  
temperatures above 85° Fahrenheit.  
Engaged  
Storage  
Latch  
Catch  
HOW TO MOVE THE TREADMILL  
Before moving the treadmill, convert the treadmill to the storage  
position as described above. Make sure that the storage latch  
is fully engaged over the catch.  
1. Hold the the handrails, and place one foot against one of the  
wheels.  
2. Tilt the treadmill back until it rolls freely on the wheels.  
Carefully move the treadmill to the desired location. To re-  
duce the risk of injury, use extreme caution while mov-  
ing the treadmill. Do not move the treadmill over an un-  
even surface.  
Wheels  
3. Place one foot against one of the wheels, and carefully lower  
Base  
the treadmill until it is resting in the storage position.  
HOW TO LOWER THE TREADMILL FOR USE  
1. See drawing 2 above. Hold the upper end of the treadmill with your right hand. Using your left thumb, press the  
storage latch to the left. Pivot the frame down until the frame and the foot rail are past the storage latch.  
2. See drawing 1 above. Hold the treadmill firmly with both hands, and lower the frame to the floor. Do not drop  
the frame to the floor. To decrease the possibility of injury, bend your legs and keep your back  
straight.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and  
follow the steps listed. If further assistance is needed, please see the front cover of this manual.  
PROBLEM: The power does not turn on  
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor  
is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppressor  
that meets all of the specifications described on page 8. Important: The treadmill is not compatible  
with GFCI-equipped outlets.  
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.  
c. Check the reset/off circuit breaker located on the  
c
treadmill frame near the power cord. If the switch  
protrudes as shown, the circuit breaker has  
tripped. To reset the circuit breaker, wait for five  
minutes and then press the switch back in.  
Reset  
Tripped  
PROBLEM: The power turns off during use  
SOLUTION: a. Check the reset/off circuit breaker located on the treadmill frame near the power cord (see the  
drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch  
back in.  
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for  
five minutes, and then plug it back in.  
c. Remove the key from the console. Reinsert the key fully into the console.  
d. If the treadmill still will not run, see the front cover of this manual.  
PROBLEM: The displays of the console do not function properly  
SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. Remove the screws from  
the hood, and carefully remove the hood.  
Locate the Reed Switch (44) and the Magnet (45) on  
the left side of the Pulley (50). Turn the Pulley until the  
1/8”  
50  
Magnet is aligned with the Reed Switch. Make sure  
that the gap between the Magnet and the Reed  
Switch is about 1/8”. If necessary, loosen the Screw  
(33), move the Reed Switch slightly, and then  
retighten the Screw. Re-attach the hood, and run the  
treadmill for a few minutes to check for a correct  
speed reading.  
44  
33  
45  
Top  
View  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM: The walking belt slows when walked on  
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.  
b. If the walking belt is overtightened, treadmill perfor-  
b
mance may decrease and the walking belt may be-  
come damaged. Remove the key and UNPLUG THE  
POWER CORD. Using the allen wrench, turn both  
rear roller bolts counterclockwise, 1/4 of a turn. When  
the walking belt is properly tightened, you should be  
able to lift each edge of the walking belt 2 to 3 inches  
off the walking platform. Be careful to keep the walk-  
ing belt centered. Then, plug in the power cord, insert  
the key, and run the treadmill for a few minutes.  
Repeat until the walking belt is properly tightened.  
2”–3”  
Rear Roller Bolts  
c. If the walking belt still slows when walked on, see the front cover of this manual.  
PROBLEM: The walking belt is off-center or slips when walked on  
SOLUTION: a. If the walking belt is off-center, first remove the key  
a
and UNPLUG THE POWER CORD. If the walking  
belt has shifted to the left, use the allen wrench to  
turn the left rear roller bolt clockwise 1/2 of a turn; if  
the walking belt has shifted to the right, turn the  
bolt counterclockwise 1/2 of a turn. Be careful not to  
overtighten the walking belt. Then, plug in the power  
cord, insert the key, and run the treadmill for a few  
minutes. Repeat until the walking belt is centered.  
b. If the walking belt slips when walked on, first remove  
b
the key and UNPLUG THE POWER CORD. Using  
the allen wrench, turn both rear roller bolts clockwise,  
1/4 of a turn. When the walking belt is correctly tight-  
ened, you should be able to lift each edge of the walk-  
ing belt 2 to 3 inches off the walking platform. Be  
careful to keep the walking belt centered. Then, plug  
in the power cord, insert the key, and carefully walk  
on the treadmill for a few minutes. Repeat until the  
walking belt is properly tightened.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONDITIONING GUIDELINES  
is to burn fat, adjust the speed and incline of the tread-  
mill until your heart rate is near the lowest number in  
your training zone.  
WARNING:  
Before beginning this  
or any exercise program, consult your physi-  
cian. This is especially important for individu-  
als over the age of 35 or individuals with pre-  
existing health problems.  
For maximum fat burning, adjust the speed and incline  
of the treadmill until your heart rate is near the middle  
number in your training zone.  
The pulse sensor is not a medical device.  
Various factors, including your movement,  
may affect the accuracy of heart rate readings.  
The sensor is intended only as an exercise aid  
in determining heart rate trends in general.  
Aerobic Exercise  
If your goal is to strengthen your cardiovascular sys-  
tem, your exercise must be “aerobic.” Aerobic exercise  
is activity that requires large amounts of oxygen for  
prolonged periods of time. This increases the demand  
on the heart to pump blood to the muscles, and on the  
lungs to oxygenate the blood. For aerobic exercise,  
adjust the speed and incline of the treadmill until your  
heart rate is near the highest number in your training  
zone.  
The following guidelines will help you to plan your ex-  
ercise program. For more detailed exercise informa-  
tion, obtain a reputable book or consult your physician.  
EXERCISE INTENSITY  
WORKOUT GUIDELINES  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, the key to achieving the  
desired results is to exercise with the proper intensity.  
The proper intensity level can be found by using your  
heart rate as a guide. The chart below shows recom-  
mended heart rates for fat burning and aerobic exercise.  
Each workout should include the following three parts:  
A Warm-up—Start each workout with 5 to 10 minutes  
of stretching and light exercise. A proper warm-up in-  
creases your body temperature, heart rate and circula-  
tion in preparation for exercise.  
Training Zone Exercise—After warming up, increase  
the intensity of your exercise until your pulse is in your  
training zone for 20 to 60 minutes. (During the first few  
weeks of your exercise program, do not keep your  
pulse in your training zone for longer than 20 minutes.)  
Breathe regularly and deeply as you exercise—never  
hold your breath.  
To find the proper heart rate for you, first find your age  
near the bottom of the chart (ages are rounded off to  
the nearest ten years). Next, find the three numbers  
above your age. The three numbers define your “train-  
ing zone.” The lower two numbers are recommended  
heart rates for fat burning; the higher number is the  
recommended heart rate for aerobic exercise.  
A Cool-down—Finish each workout with 5 to 10 min-  
utes of stretching to cool down. This will increase the  
flexibility of your muscles and will help prevent post-  
exercise problems.  
EXERCISE FREQUENCY  
Fat Burning  
To maintain or improve your condition, complete three  
workouts each week, with at least one day of rest be-  
tween workouts. After a few months, you may com-  
plete up to five workouts each week if desired.  
To burn fat effectively, you must exercise at a relatively  
low intensity level for a sustained period of time.  
During the first few minutes of exercise, your body  
uses easily accessible carbohydrate calories for en-  
ergy. Only after the first few minutes does your body  
begin to use stored fat calories for energy. If your goal  
The key to success is to make exercise a regular and  
enjoyable part of your everyday life.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART LIST—Model No. WLTL34305.0  
R1105A  
Key  
No.  
Key  
No.  
Qty.  
Description  
Qty.  
Description  
1
2
3
4
5
6
7
8
1
1
2
1
1
1
1
4
4
1
1
1
13  
1
2
7
1
2
1
4
1
4
1
1
9
1
1
1
1
1
2
1
8
1
4
2
2
6
5
4
2
1
1
1
1
1
1
4
2
1
1
2
2
1
1
Left Handrail  
Key/Clip  
Incline Leg Pivot Bolt  
Cover  
Left Foot Rail  
Lift Motor  
Rear Roller  
1” Bolt  
1/4” Star Washer  
Console  
Base  
Motor Belt  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
100  
101  
102  
103  
#
1
4
2
1
1
2
1
3
1
2
4
1
1
1
8
1
1
2
1
1
1
2
4
4
1
2
1
2
1
1
3
2
2
1
1
1
1
1
1
2
1
4
3
1
1
1
4
2
1
1
1
1
Reset/Off Circuit Breaker  
U-nut  
Base Washer  
Latch Decal  
Motor Belly Pan  
Cable Tie Clamp  
Right Upright  
Releasable Tie  
Choke  
Belt Guide  
Belly Pan Fastener  
Walking Belt  
Walking Platform  
Belly Pan  
Electronics Screw  
Incline Wire Harness  
Upright Grommet  
Small Screw  
5/32” Allen Wrench  
Frame  
Left Upright  
Incline Wheel Bolt  
2 1/4” Bolt  
Incline Wheel Nut  
Ground Wire  
Hood Screw, Front  
Incline Leg  
Rear Roller Adj. Bolt  
Left Rear Endcap  
Right Rear Endcap  
Incline Motor Bolt/Frame Pivot Bolt  
Belly Pan Screw  
Crossbar Star Washer  
Motor Belt Shield  
Bookrack  
Silver Ground Screw  
Warning Decal  
Right Foot Rail  
Silver Screw  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
3/4” Screw  
Storage Latch  
Frame Spacer  
8” Cable Tie  
Motor Nut  
Upright Lock Bracket  
Motor Assembly  
5/16” Star Washer  
Wire Harness  
Belt Guide Screw  
Motor Hood  
Hood Shield  
Screw  
Controller  
Motor Swivel Bolt  
Motor Tension Nut  
Motor Star Washer  
Motor Tension Washer  
Motor Tension Bolt/Incline Motor Bolt  
Incline Stop Bracket  
Belly Pan Screw  
Crossbar  
Cage Nut  
Wheel Bolt  
Wheel  
Wheel Nut/Lift Nut  
Washer  
Base Pad  
Handrail Cap  
Latch Catch  
Reed Switch Clip  
Reed Switch  
Magnet  
Console Base  
Right Handrail  
Platform Screw  
Isolator  
Front Roller/Pulley  
Front Roller Adj. Bolt  
Incline Wheel  
Crossbar Screw  
Power Cord  
Plastic Tie  
Console Cover  
1/2” Screw  
Roller Star Washer  
Hole Plug  
Bumper  
Allen Wrench  
1” Tek Screw  
Base Endcap  
4” Black Wire, 2F  
4” Blue Wire, 2F  
6” White Wire, M/F  
User’s Manual  
#
#
#
Power Cord Grommet  
# These parts are not illustrated  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART IDENTIFICATION CHART  
Remove this chart and use it to identify small parts during assembly. Save  
this chart and the EXPLODED DRAWING/PART LIST for future reference.  
Silver Ground  
Crossbar Screw  
(53)–2  
1/2” Screw (97)–4  
1” Bolt (8)–4  
3/4” Screw (13)–8  
Screw (91)–1  
1” Tek Screw (102)–4  
5/16” Star Washer  
(20)–4  
1/4” Star Washer (9)–4  
2 1/4” Bolt (78)–4  
Crossbar Star  
Washer (88)–2  
Wheel Nut (38)–2  
Wheel Bolt (36)–2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ORDERING REPLACEMENT PARTS  
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give  
the following information:  
• the MODEL NUMBER of the product (WLTL34305.0)  
• the NAME of the product (WESLO® CADENCE C66 treadmill)  
• the SERIAL NUMBER of the product (see the front cover of this manual)  
• the KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED DRAW-  
ING in the center of this manual)  
LIMITED WARRANTY  
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and  
material, under normal use and service conditions. The drive motor is warranted for two (2) years after  
the date of purchase. Parts and labor are warranted for ninety (90) days after the date of purchase.  
This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to  
replacing or repairing, at ICON's option, the product through one of its authorized service centers. All re-  
pairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped to a  
service center, freight charges to and from the service center will be the customer’s responsibility. For in-  
home service, the customer will be responsible for a minimal trip charge. This warranty does not extend  
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, im-  
proper or abnormal usage or repairs not provided by an ICON authorized service center; to products  
used for commercial or rental purposes; or to products used as store display models. No other warranty  
beyond that specifically set forth above is authorized by ICON.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-  
nection with the use or performance of the product or damages with respect to any economic loss, loss  
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other  
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in-  
cidental or consequential damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of  
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set  
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the  
above limitation may not apply to you.  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
Part No. 230848 R1105A  
Printed in USA © 2005 ICON IP, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weed Eater Trimmer 545186759 User Manual
Westinghouse Dust Collector WST1800 User Manual
Whirlpool Appliance Trim Kit ADP 750 User Manual
Whirlpool Clothes Dryer CGM2751KQ1 User Manual
White Rodgers Thermostat 1F97 1271 User Manual
Woodstock Impact Driver W1701 User Manual
Wyse Technology Webcam wyse usb firmware tool User Manual
XM Satellite Radio Stereo System P N 08A15 1E1 000 User Manual
Zanussi Ventilation Hood ZHC 916X User Manual
Zenoah Brush Cutter YM415FW User Manual