Model No. WEBE09913
Serial No.
Write the serial number in the space
above for reference.
USER’S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are commit-
ted to providing complete customer
satisfaction. If you have questions,
or if there are missing parts, we will
guarantee complete satisfaction
through direct assistance from our
factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians
on our customer hot line will pro-
vide immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
Patent Pending
CAUTION
Visit our website at
Read all precautions and instructions
in this manual before using this
equipment. Save this manual for
future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
Thank you for selecting the versatile WEIDER® TWO
TONE body toning system. The TWO TONE body toning
system is designed to help you develop every major mus-
cle group of the body. Whether your goal is a shapely fig-
ure, dramatic increase in muscle size and strength, or a
For your benefit, read this manual carefully before
using the WEIDER® TWO TONE body toning system. If
you have additional questions, please call our Customer
Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (exclud-
healthier cardiovascular system, the TWO TONE body ton- ing holidays). To help us assist you, please mention the
ing system will help you achieve the specific results you
want.
product model number (WEBE09913) and the serial num-
ber found on a decal attached to the body toning system
(see the front cover of this manual).
Assembly—Ab–Tilt & Tone
1.Press two 2” Round
Outer Caps (23) onto
each of the two Front
Stabilizers (9) and
the two Rear
3.Hold the Metal
3
1
34
12
34
Bushing (27) inside
11
the Seat Frame (15).
30
Slide a 5/16” x 1 3/4”
Bolt (33) into the
upper hole in the Ab
Frame (11), the Seat
Frame, and the Metal
Bushing.
27
34
23
9
23
Stabilizers (not
33
31
shown). Note: The
Front Stabilizers are
shorter than the Rear Stabilizers.
35
15
Attach a Front Stabilizer (9) to the Ab Leg (12) with two
5/16” x 2 1/2” Carriage Bolts (31) and two 5/16” Nylon
Locknuts (34). Attach a Rear Stabilizer (not shown) to the
other end of the Ab Leg in the same manner.
Slide another 5/16” x
1 3/4” Bolt (33) into
the lower hole in the
Ab Frame (11) and the Seat Frame (15).
2.Insert a 5/16” x 3”
2
Secure the two 5/16” x 1 3/4” Bolts (33) with two 5/16”
Washers (35) and two 5/16” Nylon Locknuts (34).
13
Carriage Bolt (32)
into the center hole in
the Large Support
Plate (14). Attach the
Large Support Plate
to the Large Seat
(13) with two 1/4” x
3/4” Screws (40).
Press a 1” x 2” Inner Cap (30) into the upper end of the
Seat Frame (15).
15
32
40
4.Remove the 1/4” x
4
14
11
39
16
48
1/2” Type 23 Screws
(47) from the Ab
32
40
12
30
38
40
Frame (11). Attach
the Ab Handlebars
(10) to the Ab Frame
with the two 1/4” x
1/2” Type 23 Screws.
16
10
47
Insert a 5/16” x 3”
Carriage Bolt (32)
into the indicated
hole in the Seat
Frame (15). Insert
47
35
46
10
the 5/16” x 3” Carriage Bolt in the Large Support Plate
(14) through the rear hole in the Seat Frame.
Press a 1 1/8” Round
Inner Cap (16) into
each Ab Handlebar
(10).
17
Hold a 1/4” Washer (38) and a 1/4” x 3/4” Screw (40)
inside the Seat Frame (15), and use them to attach the
Large Seat (13) to the Seat Frame. Press a 1” x 2”
Inner Cap (30) into the lower end of the Seat Frame.
Wet the Ab Handlebars (10) and the Ab Frame (11) with
soapy water. Slide a Cover Sleeve (17) onto each Ab
Handlebar.
Secure the two 5/16” x 3” Carriage Bolts (32) to the Ab
Leg (12) with two 5/16” Washers (35) and two 5/16”
Nylon Jamnuts (46).
Insert the Tie Wrap (39) through the hole in the Spring
Cover (48), and secure it around the Seat Frame (15).
Cut the excess Tie Wrap.
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly—Rock & Tone
5. Attach a Rear
5
8. Slide a Grip (22)
onto each end of the
Handlebar (21).
8
Stabilizer (8) to the
29
31
8
Base (2) with two
5/16” x 2 1/2”
Carriage Bolts (31)
and two 5/16” Nylon
Locknuts (34).
1
22
34
21
Attach the
Handlebar (21) to
the Backrest Frame
(1) with two 5/16” x
2” Bolts (42), two
5/16” Washers (35),
and two 5/16” Nylon
Locknuts (34).
35
42
34
2
38
50
22
6. Attach a Front
Stabilizer (9) to the
Adjustment Frame
(3) with two 5/16” x
2 1/2” Carriage
34
6
6
41
35
2
3
Attach the Small
Seat (29) to the Handlebar (21) with two 1/4” x 1 1/2”
Screws (50) and two 1/4” Washers (38).
35
34
49
26
Bolts (31) and two
5/16” Nylon
34
Locknuts (34).
9. Insert a 1/4” x 2”
9
38
31
9
Carriage Bolt (45)
into the center hole
of the Support Plate
(20).
Slide the Adjustment
43
1
Frame (3) through the Slider Bushing (49) and into the
Base (2). Insert the Adjustment Pin (26) into the indi-
cated hole in the Base and a hole in the Adjustment
Frame.
4
38
20
40
44
Attach the Support
Plate (20) to the
Backrest (4) with
two 1/4” x 3/4”
Screws (40).
45
Attach the Press Plate (6) to the Adjustment Frame (3)
with two 5/16” x 1 3/4” Carriage Bolts (41), two 5/16”
Washers (35), and two 5/16” Nylon Locknuts (34).
7. Make sure the End
7
Attach the Backrest (4) to the the Backrest Frame (1)
with the 1/4” x 2” Carriage Bolt (45), a 1/4” Washer
(38), and a 1/4” Nylon Locknut (44).
Plate (19) is inside
24
the Angled Cap
(18). Press the
1
Angled Cap onto the
bottom end of the
Backrest Frame (1).
Press a 1 1/2”
Square Inner Cap
(24) into the top of
the Backrest Frame.
Secure the Backrest (4) with a 1/4” x 2” Screw (43)
and a 1/4” Washer (38).
34
35
The use of the remaining parts will be explained in
Adjusting The Body Toning System.
7
42
18
34
36
35
19
Attach the Pivot
Frame (7) to the
Backrest Frame (1)
with two 5/16” x 2”
Bolts (42), two 5/16”
Washers (35), and
2
37
two 5/16” Nylon Locknuts (34).
Attach the Pivot Frame (7) to the Base (2) with a 3/8” x
2 3/4” Bolt (37) and a 3/8” Nylon Locknut (36). Do not
over tighten the Locknut; the Pivot Frame must be
able to pivot easily.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise Guide
Ab Crunch
Back Extension
Leg Press
Calf Raise
Side To Side*
Cross Over**
Lower Ab Crunch
Circulate
Twist
One Leg Squat
Criss Cross
One Leg Side Squat
One Leg Squat with Leg Extension
Crunch With Knee Lift
One Leg Side Squat with Leg Extension
Included with the TWO TONE body toning system
is an exercise video. This video will motivate and
guide you through a 30-minute workout, helping
you get the maximum benefit from the body toning
system. The personal trainer will demonstrate the
correct form for each of the exercises that can be
performed with the AB–TILT & TONE and the
ROCK & TONE.
*This exercise can be performed leaning forward, upright, or lean-
**From the starting position, lean back (see Back Extension), and
ing back.
then to the finishing position.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part List—Model No. WEBE09913
R0601A
Key No. Qty. Description
Key No. Qty. Description
Key No. Qty. Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1
1
1
1
4
1
1
2
2
2
1
1
1
1
1
2
2
1
1
Backrest Frame
Base
Adjustment Frame
Backrest
Spring Clip
Press Plate
Pivot Frame
Rear Stabilizer
Front Stabilizer
Ab Handlebar
Ab Frame
20
21
22
23
24
1
1
2
8
1
Support Plate
Handlebar
Grip
2” Round Outer Cap
1 1/2” Square Inner
Cap
36
37
38
39
40
41
1
1
5
1
5
2
3/8” Nylon Locknut
3/8” x 2 3/4” Bolt
1/4” Washer
Tie Wrap
1/4” x 3/4” Screw
5/16” x 1 3/4” Carriage
Bolt
5/16” x 2” Bolt
1/4” x 2” Screw
1/4” Nylon Locknut
1/4” x 2” Carriage Bolt
5/16” Nylon Jamnut
1/4” x 1/2” Type 23
Screw
25
26
27
28
29
30
31
2
1
1
2
1
2
8
25-lb. Band
Adjustment Pin
Metal Bushing
10-lb. Band
42
43
44
45
46
47
4
1
1
1
2
2
Small Seat
Ab Leg
Large Seat
1” x 2” Inner Cap
5/16” x 2 1/2” Carriage
Bolt
5/16” x 3” Carriage
Bolt
Large Support Plate
Seat Frame
1 1/8” Round Inner Cap
Cover Sleeve
Angled Cap
End Plate
32
2
2
48
49
50
#
1
1
2
1
1
Spring Cover
Slider Bushing
1/4” x 1 1/2” Screw
User’s Manual
Exercise Video
33
34
35
5/16” x 1 3/4” Bolt
16 5/16” Nylon Locknut
10 5/16” Washer
#
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the
user’s manual for information about ordering replacement parts.
Part Identification Chart
3/8" Nylon
Locknut (36)
5/16" Nylon
Locknut (34)
5/16" Nylon
Jamnut (46)
1/4" Nylon
Locknut (44)
1/4" x 1/2" Type
23 Screw (47)
1/4" x 2" Screw (43)
1/4" x 1 1/2" Screw (50)
1/4" Washer (38)
5/16" Washer (35)
Download from Www.Somanuals.com. All Manuals Search And Download.
Exploded Drawing—Model No. WEBE09913
R0601A
16
11
47
39
10
33
16
48
24
47
4
43
38
17
10
14
20
40
30
27
35
34
32
45
13
35
15
38
1
44
34
40
32
35
29
7
22
42
42
34
40
34
30
38
40
35
21
42
19
18
12
38
34
35
22
34
50
46
8
34
23
23
34
23
31
34
36
9
23
31
23
34
8
2
37
41
6
31
23
49
3
35
34
26
34
34
23
23
9
5
28
25
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering Replacement Parts
Warning Decal
To order replacement parts, simply call our Customer
Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (exclud-
ing holidays). To help us assist you, please be prepared
to give the following information when calling:
The decal shown below has been placed on the body
toning system in the locations shown. If a decal is
missing, or not legible, please call our Customer
Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time, to
order a free replacement decal. Apply the replacement
decal to the location shown.
• The MODEL NUMBER of the product (WEBE09913)
• The NAME of the product (WEIDER® TWO TONE body
toning system)
!
WA R N I N G
• Misuse of this product may result in serious
injury.
• The SERIAL NUMBER of the product (see the front
cover of this manual)
• Read user’s manual and follow all warnings
and operating instructions prior to use.
• Do not allow children on or around machine.
• Replace label if damaged, illegible, or removed.
• The KEY NUMBER and DESCRIPTION of the desired
part(s) (see the PART LIST and the EXPLODED
DRAWING inside of this manual).
Limited Warranty
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material,
under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty
extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at
ICON's option, the product at one of its authorized service centers. All products for which warranty claim is made
must be received by ICON at one of its authorized service centers with all freight and other transportation charges
prepaid, accompanied by sufficient proof of purchase. All returns must be pre-authorized by ICON. This warranty
does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center, products used for com-
mercial or rental purposes, or products used as store display models. No other warranty beyond that specifically set
forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with
the use or performance of the product or damages with respect to any economic loss, loss of property, loss of rev-
enues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of what-
soever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages.
Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some
states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply
to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 176792 R0601A
Printed in Canada © 2001 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|