Model No. WEBE09140
Serial No.
Write the serial number in the
space above for reference.
USER’S MANUAL
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-877-992-5999
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the exercise rack.
1. Read all instructions in this manual before
using the exercise rack. Use the exercise
rack only as described in this manual.
6. Use the exercise rack only on a level surface.
Cover the floor beneath the exercise rack to
protect the floor.
2. It is the responsibility of the owner to ensure
that all users of the exercise rack are ade-
quately informed of all precautions.
7. Make sure all parts are properly tightened
each time the exercise rack is used. Replace
any worn parts immediately.
3. The exercise rack is intended for home use
only. Do not use the exercise rack in any
commercial, rental, or institutional setting.
8. Always wear athletic shoes for foot protec-
tion while exercising.
9. The exercise rack is designed to support a
maximum user weight of 300 pounds.
4. Keep the exercise rack indoors, away from
moisture and dust. Do not put the exercise
rack in a garage or covered patio, or near
water.
10. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
5. Keep children under 12 and pets away from
the exercise rack at all times.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER® 200
exercise rack. The exercise rack is designed to help
you develop the major muscle groups of the upper
body. Whether your goal is a shapely figure, dramatic
increase in muscle size and strength, or a healthier
cardiovascular system, the exercise rack will help you
achieve the specific results you want.
Department toll-free at 1-877-992-5999, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
note the product model number and serial number
before calling. The model number is WEBE09140. The
serial number can be found on a decal attached to the
exercise rack (see the front cover of this manual).
For your benefit, read this manual carefully before
using the exercise rack. If you have questions after
reading this manual, please call our Customer Service
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
ASSEMBLED
DIMENSIONS:
Height: 84 in.
Width: 41 in.
Depth: 57 in.
Pull-up Bar
Upright
Arm Pad
Handles
Backrest
Dip Arm
Handle
Foot Rest
Stabilizer
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Make Things Easier for Yourself
This manual is designed to ensure that the
exercise rack can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
• As you assemble the exercise rack, make sure all
parts are oriented as shown in the drawings.
The following tools (not included) are required
for assembly:
Before beginning assembly, carefully read the
following information and instructions:
• Two adjustable wrenches
• One rubber mallet
• Assembly requires two people.
• One standard screwdriver
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
• One Phillips screwdriver
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1.
1
Before beginning assembly, make sure you
understand the information in the box
above. Important: Some of the parts
described in the assembly steps may be
pre-assembled.
Insert four M8 x 68mm Carriage Bolts (20) up
through a Stabilizer (1).
1
Repeat with the other Stabilizer (1).
20
20
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attach an Upright Base (2) to a Stabilizer (1) with
the indicated two M8 x 68mm Carriage Bolts (20)
and two M8 Nylon Locknuts (22). Note: Attach
the Upright Base so that the hexagonal holes
are on the indicated side. Do not tighten the
Locknuts yet.
2
Hexagonal
holes on
this side
Attach the other Upright Base (2) to the other
Stabilizer (1) in the same manner.
2
22
20
22
1
3. Attach the Bottom Crossbar (10) to an Upright
Base (2) with two M8 x 77mm Bolts (29), a
Support Plate (13), and two M8 Nylon Locknuts
(22). Note: Attach the Bottom Crossbar so that
the indicated warning decals are in the indi-
cated locations. Do not tighten the Locknuts
yet.
3
Decal
10
2
13
29
Attach the Bottom Crossbar (10) to the other
Upright Base (2) in the same manner.
22
2
Decal
4. Attach a Support (4) to a Stabilizer (1) with the
two indicated M8 x 68mm Carriage Bolts (20) and
two M8 Nylon Locknuts (22). Do not tighten the
Locknuts yet.
4
2
23
22
17
Attach the Support (4) to the Upright Base (2)
with two M8 x 75mm Bolts (17), two M8 Washers
(23), and two M8 Nylon Locknuts (22). Do not
tighten the Locknuts yet.
23
4
22
Attach the other Support (4) to the other
Stabilizer (1) and Upright Base (2) in the same
manner.
22
1
22
20
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Orient the Left Upright (28) as shown and attach
it to the left Upright Base (2) with two M8 x 68mm
Bolts (24), two M8 Washers (23), and two M8
Nylon Locknuts (22). Note: The Bolts must be
attached to the lowest set of holes in the
Upright and Upright Base. Make sure the bolt
heads fit inside the hexagonal holes in the
Upright Base. Attach the Upright so that the
name decal is in the indicated location. Do not
tighten the Locknuts yet.
5
3
28
Attach the Right Upright (3) to the other
Upright Base (2) in the same manner.
Name
Decal
24
2
23
2
22
23
6. Attach a Dip Arm (5) to the Right Upright (3) and
Upright Base (2) with two M8 x 77mm Bolts (29),
a Support Plate (13), and two M8 Nylon Locknuts
(22). Do not tighten the Locknuts yet.
6
3
2
29
22
Repeat this step with the other Dip Arm (5)
and the Left Upright (not shown).
13
5
22
5
7. Attach the Top Crossbar (7) to a Dip Arm (5) with
two M8 x 75mm Bolts (17), two M8 Washers (23),
and two M8 Nylon Locknuts (22). Do not tighten
the Locknuts yet.
7
7
5
Attach the Top Crossbar (7) to the other Dip
Arm (5) in the same manner.
22
23
23
5
17
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Attach the Pull-up Bar (9) to the Uprights (3, 28)
with two M10 x 50mm Screws (19) and two M10
Washers (26). Make sure the indents around
the holes in the Pull-up Bar are on the side
shown. Press two Rubber Endcaps (12) into the
ends of the Uprights.
8
12
9
26
19
12
19
26
Tighten all of the M8 Nylon Locknuts (22)
used in steps 2–8.
Indents
3
28
9. Attach the Backrest (8) to the Top Crossbar (7)
with four M6 x 16mm Screws (27) and four M6
Washers (21).
9
27
21
27
7
21
8
10. Attach an Arm Pad (6) to a Dip Arm (5) with two
M6 x 73mm Screws (18).
10
6
Repeat this step with the other Arm Pad (6).
5
18
6
11. Make sure that all parts have been properly
tightened before the exercise rack is used.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
MUSCLE BUILDING
To increase the size and strength of your muscles,
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo-
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
ing it during the first few months of your exercise pro-
gram. You should progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
right for you. Begin with 3 sets of 8 repetitions for each your body for more strenuous exercise by increasing
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
WORKING OUT
TONING
You can tone your muscles by pushing them to a mod- Each workout should include 6 to 10 different exercis-
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
pleting more sets rather than by using high amounts of Schedule your workouts for the time of day when your
resistance.
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
WEIGHT LOSS
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
CROSS TRAINING
Cross training is an efficient way to get a complete and moving only the appropriate parts of the body.
well-balanced fitness program. An example of a bal-
anced program is:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an elliptical or
exercise bike, on Tuesday and Thursday.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. See the muscle chart on the next
page to find the names of the muscles.
• Rest from both strength training and aerobic exercise The repetitions in each set should be performed
for at least one full day each week to give your body
time to regenerate.
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
The combination of strength training and aerobic exer-
cise will reshape and strengthen your body, plus devel- during the return stroke. Never hold your breath.
op your heart and lungs.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set. The
ideal resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. The
chart on page 11 of this manual can be photocopied
and used to schedule and record your workouts. List
the date, the exercises performed, the resistance
used, and the numbers of sets and repetitions com-
pleted. Record your weight and key body measure-
ments at the end of every month. Remember, the key
to achieving the greatest results is to make exercise a
regular and enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
P
L
Q
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
R
S
C
D
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
W
X
J
K
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part from the PART LIST. Note: Some small parts may have been pre-attached. If a
part is not in the parts bag, check to see if it has been pre-attached.
M6 x 16mm Screw (27)
M10 x 50mm Screw (19)
M10 Washer (26)
M8 x 68mm Bolt (24)
M6 x 73mm Screw (18)
M8 Washer (23)
M8 x 75mm Bolt (17)
M6 Washer (21)
M8 x 68mm Carriage Bolt (20)
M8 Nylon Locknut (22)
M8 x 77mm Bolt (29)
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. WEBE09140
R0804A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
2
1
2
2
2
1
1
1
1
8
2
4
8
4
Stabilizer
16
17
18
19
20
21
22
23
24
25
26
27
28
29
#
4
8
4
2
8
60mm Outer Endcap
M8 x 75mm Bolt
M6 x 73mm Screw
M10 x 50mm Screw
M8 x 68mm Carriage Bolt
M6 Washer
M8 Nylon Locknut
M8 Washer
M8 x 68mm Bolt
Foam Grip
M10 Washer
M6 x 16mm Screw
Left Upright
M8 x 77mm Bolt
User’s Manual
Upright Base
Right Upright
Support
Dip Arm
Arm Pad
Top Crossbar
Backrest
Pull-up Bar
Bottom Crossbar
Handgrip
Rubber Endcap
Support Plate
25mm Endcap
60mm Endcap
4
28
12
4
1
2
4
1
8
1
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. WEBE09140
R0804A
12
14
19
11
26
25
9
12
19
26
15
23
22
27
17
23
11
21
14
27
22
21
7
22
23
3
29
29
6
22
23
22
17
15
14
8
13
28
6
11
15
24
29
22
22
23
14
22
5
18
23
13
11
15
11
14
22
24
2
23
5
22
22
23
17
14
18
29
13
22
23
11
29
23
22
4
11
14
2
17
22
23
10
29
22
16
29
22
22
22
23
13
11
14
1
22
22
22
22
22
16
4
20
22
1
20
22
16
20
16
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-877-992-5999, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information when calling:
• The MODEL NUMBER of the product (WEBE09140)
• The NAME of the product (WEIDER® 200 exercise rack)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED
DRAWING in the center of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be pre-authorized by ICON. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage
or repairs not provided by an ICON authorized service center; products used for commercial or rental pur-
poses; or products used as store display models. No other warranty beyond that specifically set forth above
is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or conse-
quential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 214441 R0804A
Printed in China © 2004 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|