Professional MeaT GrinDer
MG800
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
Download from Www.Somanuals.com. All Manuals Search And Download.
21. Do not leave the Waring Pro™ Professional Meat Grinder unattended
while it is running.
22. Before using for the first time, remove all packaging and wash parts.
23. This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit the outlet
perfectly, reverse the plug. If it should still not fit, contact a qualified
electrician. Do not modify the plug in any way.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
PARTS
1. On/Off/Reverse Switch
2. Locking Knob
3. Motor Housing
4. Attachment Opening
5. Food Pusher with Lid
6. Large Die-Cast Hopper
7. Grinder/Feeder Head
8. Feed Screw
11. Cutting Plate (medium)
12. Cutting Plate (coarse)
13. Sausage Attachment (small)
14. Sausage Attachment (large)
15. Sausage-Making Ring
16. Screw Ring
17. Spanner
Note: Cutting plates are stored
in food pusher
9. Cutting Blade
10. Cutting Plate (fine)
5
17
6
13
14
2
15
12
7
8
1
16
9
4
11
10
3
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING
1. Make sure unit is unplugged while assembling.
2. Fit grinder/feeder head tightly into attachment opening. Holding
head with one hand, place locking knob into the hole on the side
of the motor housing and tighten knob by turning clockwise.
3. Place feed screw into grinder/feeder head, long end spindle first;
turn it slightly until it is set into motor housing.
4. NOTE: Position cutting blade onto feed screw shaft with the flat
cutting surface facing out from the geed screw. If it is not fitted
properly, meat will not be ground and the cutting plate may be
permanently damaged.
5. Position the desired cutting plate onto the flat sides of the cutting
blade. Ensure that the notch of the cutting plate fit into the tab of
the grinder/feeder head.
6. Secure screw ring to the end of the grinder/feeder head by
turning clockwise. Use spanner to secure screw ring.
7. Place large die-cast hopper on the grinder/feeder head.
8. Use the food pusher to gently feed food, one piece at
a time. Do not force the food into the grinder/feeder head.
HOW TO USE
1. Before first use, wash all parts of the Waring Pro™ Professional
Meat Grinder.
2. Place the Waring Pro™ Professional Meat Grinder on a stable
work surface.
3. Make sure the On/Off/Reverse Switch is in the Off position.
4. Insert plug into wall outlet.
5. Place a wide, shallow bowl or plate beneath the grinder tube to
catch food.
6. Switch appliance to On position. The Waring Pro™ Professional
Meat Grinder must ALWAYS be in the On position before adding
food.
7. Place food on the large die-cast hopper and use pusher to feed
food through opening.
NOTE – REVERSE SWITCH
If the motor slows or stops, this may be due to jammed food.
Immediately switch the Waring Pro™ Professional Meat Grinder to its
Off position. To clear the feed screw, “pulse” the meat grinder in the
reverse direction by pressing the switch down and releasing it quickly
3
Download from Www.Somanuals.com. All Manuals Search And Download.
three times. Then, turn the Meat Grinder “On” again. If the Waring
Pro™ Professional Meat Grinder should get jammed again, you may
need to switch it Off, unplug, disassemble the grinder/feeder head,
and clean the internal parts.
CUTTING PLATES
Fine Cutting Plate – Great for spreads, patés, baby food, and
hamburgers.
Medium Cutting Plate – Great for ground meat used in soups, or
for relishes.
Coarse Cutting Plate – Great for ground meat used in chili, or for
vegetables
THESE PLATES ARE NOT DISHWASHER SAFE.
PLEASE HAND-WASH ONLY!
HELPFUL HINTS
•
•
•
•
•
•
Grinding stale bread pieces may help remove food residue left in
the Waring Pro™ Professional Meat Grinder after use.
Cut food into strips or cubes slightly smaller than the opening on
the large die-cast hopper.
Make sure food is free of bone, tough tendons, nutshells, etc.
before grinding.
Raw meat and fish should be thoroughly chilled (not frozen)
before grinding to reduce the loss of juices.
Freshly ground meat should be refrigerated and cooked within
24 hours.
During extended grinding, fats from meats can build up inside
the grinder tube, slowing down grinding and straining the motor.
If this happens, you should stop the Waring Pro™ Professional
Meat Grinder, wash parts in hot water, and reassemble. When
possible, alternate bread with meat. This helps keep the feed
screw clean.
•
Trim a handful of fat from meat. Process the fat through the
hopper to lubricate grinding mechanism for better processing
results.
•
•
For best drying results, prepare sausage a day or two prior to
use.
When using the large sausage attachment, it is not necessary to
use the sausage-making ring (see page 2, part #15).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Grinder/Feeder Head
Grinder/Feeder Head
Feed Screw
Motor Housing
1. Attach grinder/feeder head
to motor housing.
2. Insert feed screw into the
grinder/feeder head.
NOTE: Make sure feed screw is
inserted all the way in or cutting
blade will not fit.
Cutting Blade
Coarse Cutting
Plate
3. Attach cutting blade on the end
of the feed screw.
Spanner
4. Place the coarse cutting plate
in the grinder/feeder head.
Screw Ring
Pusher
Die Cast
Hopper
5. Tighten screw ring onto the
grinder/feeder head. Use
spanner to secure screw ring.
Coarse Cutting
Plate
Cutting Blade
6. Place large die cast hopper
onto of grinder/feeder head.
Screw Ring
7. Turn unit On.
9. Once meat has gone through
grinder, turn unit off. Remove
screw ring, coarse cutting plate
and cutting blade.
8. Using pusher, slowly feed meat
cubes.
NOTE: Meats can be seasoned
before or after grinding.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Grinder/Feeder Head
Sausage Attachment
Sausage Making
Ring
Screw Ring
10. Insert sausage making ring into
feed screw. Make sure notch on
sausage making ring aligns with
notch in feed screw.
11. Put the desired sausage
attachment (small or large) into
screw ring and screw onto the
grinder/feeder head. Use
Spanner to secure screw ring.
TO MAKE SAUSAGES
The sausage attachments allow you to blend
meats and spices for homemade sausages.
Casing
12. Slide casing over the end of the
sausage attachment, leaving
approximately 2” overhanging the end
of the attachment.
13. Place seasoned meat into the large
die cast hopper and turn the unit on.
Push the meat into the
opening in the large die cast hopper
using pusher until the mixture appears
at the end of the sausage attachment. Keep casing moist by water-
ing frequently. Turn the unit off and tie a knot at the end of the 2”
casing overhang.
14. Continue step #13 until all the meat has been used or the casing is
approximately 2" from being completely full.
15. Turn unit off, remove the end of the casing from the sausage
attachment, and tie a knot in the open end of the casing.
16. Sausages can be made to the desired length by twisting the casing
at intervals.
NOTE: To avoid over-stretching and splitting the casing, do not make
the sausages too thick. Keep casings moist by watering frequently.
The meat mixture will expand slightly during cooking.
CLEAN AND CARE
•
Always unplug motor unit when not in use, before inserting or
removing parts, and before cleaning.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Never immerse power unit in water or other liquid.
Wash all parts except motor unit by hand in hot soapy water,
using care when handling the sharp blades.
•
•
•
Rinse these parts with clear hot water, then dry.
REMOVABLE PARTS ARE NOT DISHWASHER SAFE!
Wipe motor unit with a damp cloth. Do not use harsh or
abrasive cleaners.
Cutting blade and cutting plates should be coated with cook-
ing oil after washing and then wrapped in grease-proof paper to
keep them lubricated and rust-free.
•
NOTE – Pusher has a lid. Inside you can store sausage
attachments and sausage-making ring.
RECIPES
Chicken, Feta and Spinach Sausage
Makes 5 pounds sausage
3
1
8
4
1
2
1
2
1
½
4
pounds boneless, skinless chicken thighs
pound boneless, skinless chicken breasts
ounces crumbled feta
garlic cloves, peeled and minced
tablespoon oregano
teaspoons basil
teaspoon chopped lemon zest
teaspoons kosher salt
teaspoon freshly ground black pepper
teaspoon red pepper flakes
ounces fresh spinach, shredded/chopped
Remove gristle, cartilage and large amounts of excess fat from the
chicken, and cut into 1-inch cubes. Place chicken in a large bowl. Add
feta cheese, garlic, oregano, basil, lemon zest, salt, pepper, and pep-
per flakes to chicken. Stir to combine. Just before grinding, stir shred-
ded spinach into chicken mixture. Mixture can be ground immediately,
or covered and refrigerated for up to 24 hours for a more intense flavor.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Assemble Waring Pro™ Professional Meat Grinder with the medium
cutting plate. Grind chicken mixture with the medium cutting plate.
Assemble unit for sausage making (follow “To make sausages” instruc-
tions on page 6). Sausage may be stuffed into prepared casings or
shaped into patties for cooking. Fresh sausage should be cooked
within 24 hours or double wrapped and frozen. Cook thoroughly before
serving – internal temperature should register 170°F when tested with
an instant-read thermometer.
Nutritional information per 4 oz. serving:
Calories 213 (46% from fat) • carb. 1g • pro. 27g • fat 11g • sat. fat 4g
• chol. 94mg • sod. 341mg • calc. 81mg • fiber 0g
Italian Fennel Sausage
Makes 4 pounds sausage
4
pounds pork butt
6
garlic cloves, peeled and minced
cup Italian parsley leaves, packed
tablespoons fennel seeds, crushed
tablespoon oregano
¼
1½
½
2
teaspoons kosher salt
2
teaspoons freshly ground pepper
Remove any gristle from meat. Cut into 1-inch cubes. Place meat
in a large bowl and combine with remaining ingredients. Cover and
refrigerate for at least 8 and up to 24 hours for best flavor.
Assemble Waring Pro™ Professional Meat Grinder with fine or medium
cutting plate. Grind meats. Assemble unit for sausage making (follow
“To make sausages” instructions on page 6). Stuff sausage into pre-
pared casings, form into patties or leave loose as needed. Fresh sau-
sage should be cooked within 24 hours or double wrapped and frozen.
Cook thoroughly before serving – internal temperature should register
160°F when tested with an instant-read thermometer.
Nutritional information per 4 oz. serving:
Calories 183 (48% from fat) • carb. 1g • pro. 22g • fat 9g • sat. fat 3g
• chol. 73mg • sod.244 • calc. 39mg • fiber 0g
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Andouille Sausage
With its distinctly smoky flavor, traditional Andouille sausage is a
staple of Cajun cookery and an important ingredient in jambalayas
and gumbos. The unsmoked version is made in smaller links and is
known as Andouillette.
Makes 3 pounds
3
pounds boneless pork butt (may substitute half turkey for a
lighter sausage)
4 - 6 large garlic cloves, peeled and minced
1
2
2
teaspoon browning sauce such as Gravy Master™
teaspoons kosher salt
tablespoons sweet paprika
½-1 tablespoon cayenne pepper, to taste
1
tablespoon onion powder
teaspoons dry thyme
2
½
½
½
1⁄8
teaspoon freshly ground black pepper
teaspoon crushed red pepper
teaspoon rubbed sage
teaspoon allspice
Remove any gristle from meat. Cut into 1-inch cubes. Place meat
in a large bowl and combine with remaining ingredients. Cover and
refrigerate for at least 12 and up to 24 hours for best flavor.
Assemble Waring Pro™ Professional Meat Grinder with medium or
large cutting plate. Assemble unit for sausage making (follow “To
make sausages” instructions on page 6). Grind meats. Stuff sausage
into prepared casings, tying off links into desired lengths. Sausage
may then be smoked in a homestyle smoker. Recommended smoking
temperature is 175°-200°F, and smoking time should be 4 to 6 hours.
Suggested woods for smoking Andouille are pecan or hickory. Cook
thoroughly before serving - internal temperature should register 160°F
when tested with an instant-read thermometer. The andouille may then
be used as is, sliced thinly as an hors d’oeuvre, or as an ingredient in
jambalaya, gumbo or other Cajun dish. Smoked Andouille may be frozen.
Nutritional information per 4 oz. serving:
Calories 339 (66% from fat) • carb. 2g • pro. 27g • fat 24g • sat. fat 9g
• chol. 68mg • sod. 300mg • calc. 25mg • fiber 0g
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Country Breakfast Sausage
Pork is paired with turkey to make this breakfast favorite a little lighter.
Makes 4 pounds sausage
2
pounds boneless, skinless turkey thighs
pounds boneless pork butt
2
1
tablespoon browning sauce, such as Gravy Master™
teaspoon kosher salt
1
1½
2
tablespoons rubbed sage
teaspoons freshly ground black pepper
teaspoon crushed red pepper, optional
1
Remove any visible gristle from meat. Cut turkey and pork into 1-inch
cubes. Place meats in a large bowl and add the remaining ingredients.
Stir well to combine. Cover and refrigerate for at least 8 and up to 24
hours.
Assemble Waring Pro™ Professional Meat Grinder with the medium
cutting plate. Grind meat, mixing turkey and pork evenly while grinding.
Assemble unit for sausage making (follow “To make sausages”
instructions on page 6). Ground sausage may be stuffed into prepared
casings or formed into patties. Fresh sausage should be cooked within
24 hours or double wrapped and frozen. Cook thoroughly before serv-
ing - internal temperature should register 170°F when tested with an
instant read thermometer.
Nutritional information per 4 oz. serving:
Calories 225 (45% from fat) • carb. 0g • pro. 30g • fat 11g • sat. fat 4g
• chol. 94mg • sod. 173mg • calc. 14mg • fiber 0g
Spicy Venison Sausage
Adding some pork butt makes the sausage a little moister. You may
use all venison if you wish.
Makes 4 pounds
3
1
1
pounds venison
pound pork butt
garlic cloves, peeled and minced
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1-1/2 tablespoons kosher salt
1-1/2 tablespoons freshly ground pepper
2
teaspoons sweet paprika
teaspoon honey
1
1
teaspoon cayenne pepper
teaspoon rubbed sage
teaspoon savory
1/2
1/2
Remove any visible gristle from meat. Cut meats into 1-inch cubes.
Place meats in a large bowl and add the remaining ingredients. Stir
well to combine. Cover and refrigerate for at least 8 and up to 24
hours.
Assemble Waring Pro™ Professional Meat Grinder with the medium
cutting plate. Grind meat, mixing venison and pork evenly while
grinding. Assemble unit for making sausages. Follow "To Make
Sausages" instructions on page 6. Ground sausage may be stuffed
into prepared casings or formed into patties. Fresh sausage should
be cooked within 24 hours or double wrapped and frozen. Cook
thoroughly before serving – internal temperature should register 160°F
when tested with an instant read thermometer. Venison sausage may
also be smoked in a homestyle smoker. Use wood flavor of your
choice, suggestions would include hickory or mesquite. Recommended
smoking temperature is 175°-200°F, and smoking time should be 4 to
6 hours. Cook or smoke sausage thoroughly before serving – internal
temperature should register 160°F when tested with an instant-read
thermometer.
Nutritional information per 4 oz. serving:
Calories 1170 (33% from fat) • carb. 1g • pro. 27g • fat 6g • sat. fat 2g
• chol. 97mg • sod. 431• calc. 14mg • fiber 0g
©2008 Waring Consumer Products
150 Milford Road
East Windsor, NJ 08520
Printed in China
MG800 IB
08WR163
IB-4268
Download from Www.Somanuals.com. All Manuals Search And Download.
|