VocoPro Speaker SUB 1500 User Manual

FEATURES:  
• 200 Watts of Powerful Low-end Bass for Rich and Full-spectrum Audio Experience  
• 15" Long-throw Coated Woofer for Great Sound and Durability  
• Adjustable Crossover for Variable Low-pass Filtering  
• Low-level RCA & High-level MDP Inputs/Outputs  
• Dual-port Enclosure for Efficient Release of Acoustic Energy and Thermal Build-up  
• Small Footprint Design and Recessed Handles for Easy Mobility and Placement  
• Feel the Music with Very Low-frequency Performance to 40hz  
• Full-toned, Low-distortion and Accurate Low-end Bass Response  
SUB-1500  
200W Powered Subwoofer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
8. Ventilation - The appliance should be situated so its  
location does not interfere with its proper ventilation. For  
example, the appliance should not be situated on a bed,  
sofa, rug, or similar surface that may block the  
ventilation slots.  
CAUTION  
RISK OF SHOCK  
9. Heat - The appliance should be situated away from  
heat sources such as radiators, heat registers,  
stoves, or other appliances (including amplifiers)  
that produce heat.  
CAUTION: To reduce the risk of electric shock,  
do not remove cover (or back). No user-  
serviceable parts inside. Only refer servicing to  
qualified service personnel.  
10. Power Sources - The appliance should be  
connected to a power supply only of the type described  
in the operating instructions or as marked on the  
appliance.  
Explanation of Graphical Symbols  
The lightning flash & arrowhead  
symbol, within an equilateral triangle,  
is intended to alert you to the  
presence of danger.  
11. Grounding or Polarization - Precautions should be  
taken so that the grounding or polarization means of  
an appliance is not defeated.  
12. Power-Cord Protection - Power-supply cords  
should be routed so that they are not likely to be walked  
on or pinched by items placed upon or against them,  
paying particular attention to cords at plugs,  
convenience receptacles, and the point where they exit  
from the appliance.  
The exclamation point within an  
equilateral triangle is intended to alert  
you to the presence of important  
operating and servicing instructions.  
WARNING  
To reduce the risk of fire or electric shock, do  
not expose this unit to rain or moisture.  
13. Cleaning - Unplug this unit from the wall outlet  
before cleaning. Do not use liquid cleaners or  
aerosol cleaners. Use a damp cloth for cleaning.  
14. Power lines - An outdoor antenna should be  
located away from power lines.  
1. Read Instructions - All the safety and operating  
instructions should be read before the appliance is  
operated.  
15. Nonuse Periods - The power cord of the appliance  
should be unplugged from the outlet when left unused  
for a long period of time.  
2. Retain Instructions - The safety and operating  
16. Object and Liquid Entry - Care should be taken so  
that objects do not fall and liquids are not spilled into the  
enclosure through openings.  
instructions should be retained for future reference.  
3. Heed Warnings - All warnings on the appliance and in  
the operating instructions should be adhered to.  
17. Damage Requiring Service - The appliance should  
be serviced by qualified service personnel when:  
4. Follow Instructions - All operating and use  
instructions should be followed.  
A. The power supply cord or plug has been damaged; or  
B. Objects have fallen into the appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally  
or exhibits a marked change in performance; or  
E. The appliance has been dropped, or the enclosure  
damaged.  
5. Attachments - Do not use attachments not  
recommended by the product manufacturer as they may  
cause hazards.  
6. Water and Moisture - Do not use this unit near water.  
For example, near a bathtub or in a wet basement and  
the like.  
18. Servicing - The user should not attempt to service  
the appliance beyond that described in the operating  
instructions. All other servicing should be referred to  
qualified service personnel.  
7. Carts and Stands - The appliance should be used  
only with a cart or stand that is recommended by the  
manufacturer.  
Note:  
7 A. An appliance and cart combination  
should be moved with care. Quick stops,  
excessive force, and uneven surfaces may  
cause an overturn.  
To CATV system installer's (U.S.A.): This reminder is  
provided to call the CATV system installer's attention to  
Article 820-40 of the NEC that provides guidelines for  
proper grounding and, in particular, specifies that the  
cable ground shall be connected as close to the point of  
cable entry as practical.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening For A Lifetime  
Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's  
time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic  
Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a  
safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most  
importantly, without affecting your sensitive hearing.  
Sound can be deceiving. Over time your hearing 'comfort level' adapts to a higher volume of sound. So what sounds  
'normal' can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level  
BEFORE your hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
• Pay attention to the different levels in various recordings.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for  
a lifetime.  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud  
noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association's Consumer  
Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for  
your protection.  
Some common decibel ranges:  
Level  
Example  
30  
40  
50  
60  
70  
80  
Quiet library, Soft whispers  
Living room, Refrigerator, Bedroom away from traffic  
Light traffic, Normal Conversation  
Air Conditioner at 20 ft., Sewing machine  
Vacuum cleaner, Hair dryer, Noisy Restaurant  
Average city traffic, Garbage disposals, Alarm clock at 2 ft.  
The following noises can be dangerous under constant exposure:  
Level  
Example  
90  
Subway, Motorcycle, Truck traffic, Lawn Mower  
Garbage truck, Chainsaw, Pneumatics drill  
Rock band concert in front of speakers  
Gunshot blast, Jet plane  
100  
120  
140  
180  
Rocket launching pad  
-Information courtesy of the Deafness Research Foundation  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUB-1500  
200W Powered Subwoofer  
Contents  
Safety Instructions........……………………….…………………………………...........  
1
2
Welcome……………….....…………………………….….…………………………...........  
Listening for a Lifetime.……………………………….……………………..................  
Before Getting Started….………………………………………………………..............  
Understanding Subwoofers......................................................................  
Placement Precautions.………………………………….…………...........................  
Getting Started...........................................……………………………………....  
Importance of Location.............…………………………………………............  
3
5-6  
7
8
7
7-11  
Connecting the SUB-1500…………………….…………….................................. 12-13  
Rear Panel Description and Controls.........................................................  
Powering On Test....................................................................................  
Advanced Operations.........................……………………………………...............  
Troubleshooting……………………………………………………………………..............  
Specifications…………………………………………………………………………...........  
14  
15  
16  
17  
18  
SUB-1500 Features  
• 200 Watts of Powerful Low-end Bass for Rich and Full-spectrum Audio Experience  
• 15" Long-throw Coated Woofer for Great Sound and Durability  
• Adjustable Crossover for Variable Low-pass Filtering  
• Low-level RCA & High-level MDP Inputs/Outputs  
• Dual-port Enclosure for Efficient Release of Acoustic Energy and Thermal Build-up  
• Small Footprint Design and Recessed Handles for Easy Mobility and Placement  
• Feel the Music with Very Low-frequency Performance to 40hz  
• Full-toned, Low-distortion and Accurate Low-end Bass Response  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUB-1500 Features  
The SUB-1500 features a low distortion internal amplifier, a built-in low-pass crossover, a phase switch,  
high and low level inputs/outputs and a dual voltage switch. The SUB-1500 is designed to handle a  
variety of connection options, allowing users increased freedom in system integration.  
FEATURES:  
• 200 Watts of Powerful Low-end Bass for Rich and Full-spectrum Audio Experience  
• 15" Long-throw Coated Woofer for Great Sound and Durability  
• Adjustable Crossover for Variable Low-pass Filtering  
• Line-level RCA & High-level MDP Inputs/Outputs  
• Dual-port Enclosure for Efficient Release of Acoustic Energy and Thermal Build-up  
• Small Footprint Design and Recessed Handles for Easy Mobility and Placement  
• Feel the Music with Very Low-frequency Performance to 40hz  
• Full-toned, Low-distortion and Accurate Low-end Bass Response  
Before Getting Started  
Safety  
1. Power Source - Operate only from a power source as directed on the unit or in the operating instructions.  
2. Polarization - If your unit is equipped with a polarized alternating current line plug (a plug having one blade  
wider than the other), this plug will fit into the power outlet only one way. This is a safety feature. If you are  
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an  
electrician to replace your obsolete outlet.  
Note: Do not defeat the safety purpose of the polarized plug by trying to grind the larger metal blade  
down till it fits in the outlet.  
3. Cord Placement - Do not allow anything to rest on, roll over, or pinch the power cord, and do not place the  
power cord where it is subject to traffic and abuse. This may result in an electrical shock or fire hazard.  
4. AC Outlet - Overloaded AC outlets and extension cords are dangerous as well as frayed cords and broken  
plugs. Avoid compounding these situations by plugging in more appliances to such outlets. Also, try to remove  
appliances with damaged cords or plugs before adding any more appliances to the area.  
5. Nonuse Periods - When the unit is not used, turn the power off. When left unused for a long period of time,  
the unit should be unplugged from the household AC outlet.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Gettin Started (cont.)  
Installation Environment  
1. Water and Moisture - Do not use this unit near water - for example near an aquarium or the like. Damp  
basements should also be avoided.  
2. Condensation - Internal moisture may form in the following cases:  
• Immediately after a heater has been turned on  
• In a steamy or very humid room.  
• When the unit is suddenly moved from a cold environment to a  
warm one  
• If moisture forms inside this unit, it should not be operated until  
completely dry.  
3. Heat - The unit should be situated away from heat sources such as  
radiators and the like. It also should not be placed in temperatures  
less than 5°C (41° F) or greater that 35° C (95° F).  
Maintenance  
Clean the panel and controls with a soft cloth lightly moistened with mild detergent solution. Do not use any type  
of abrasive pad, scouring powder or solvent such as alcohol or benzene.  
Service  
1. Reading Instructions - This is probably one of the most important things to remember. All the safety and  
operating instructions should be read before the appliance is installed and operated. The life span of your  
purchase can depend on how well you take care of it.  
2. Damage Requiring Service - The unit should be serviced by qualified  
service personnel when:  
(a) The A/C mains power cord or plug has been damaged  
(b) Objects have fallen or liquid has been spilled into the unit  
(c) The unit has been exposed to rain  
(d) The unit does not appear to operate normally or exhibits a  
marked change in performance  
(e) The unit has been dropped, or the enclosure damaged  
3. Servicing - The user should not attempt to service the unit beyond that described in the operating  
instructions. All other servicing should be referred to qualified service personnel.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Understanding Subwoofers  
Before we get into finding a location for the SUB-1500 and making any connections, we want to be sure we  
explain some fundamental principles about subwoofer performance. Simply hooking up a subwoofer to an audio  
system like a loudspeaker can significantly compromise the performance of the subwoofer, and at times even  
make the system sound worse. Below are some important guidelines regarding subwoofer installations that can  
help you get a better sound in less time.  
Room Acoustics  
The low frequency response and efficiency of a subwoofer are heavily influenced by the acoustics of the playback  
environment. More specifically, the response is influenced by the room's dimensional ratios, types of construction  
and location of the subwoofer within that environment. You can significantly improve the subwoofers in-room  
response and efficiency by experimenting with various room placements until you find an optimum location.  
General acoustical guidelines to be kept in mind:  
• Every acoustic space is unique and experimentation is an important key in finding the best possible  
location in your particular environment.  
• A subwoofer becomes more acoustically efficient (has greater output) as you move it closer to a room  
surface (e.g. wall or floor).  
• A subwoofer will give maximum output and maximum acoustic excitement when it is located in a corner.  
• Under certain acoustic conditions, corner locations are optimum; in others, they can excite multiple "room  
modes", producing "muddy" or "boomy" sound.  
Localization  
A subwoofer generates tremendous energy, so it may vibrate objects close to it. If you hear buzzing or vibrating  
objects, make sure to try to dampen those objects. Rattling, buzzing and other sympathetic resonance can make  
a subwoofer's performance localized. This localization of sound usually prevents a full-toned, full-spectrum sound,  
and therefore should be avoided. Many times localization can be heard through surface vibration, but using a sine  
wave generator is probably the most accurate method.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Placement Precautions  
Magnetic Shielding Precautions  
The SUB-1500 is not magnetically shielded and may damage a TV if placed in very close proximity. If you suspect  
or see any color distortion anywhere on a nearby TV, the SUB-1500 may be too close and should be moved away  
from the TV until the color distortion disappears.  
Basic Precautions  
DO NOT...  
• Place your subwoofer directly against a wall, leave at least a minimum of 1" of space.  
• Place against a radiator, panel heater or forced air-heating outlet  
• Place outdoors or in a humid environment  
• Plug into an AC mains outlet until all your system wiring is completed.  
Interference  
If you are familiar with wireless microphone systems, we are NOT talking about RF type interference, but rather  
acoustic interference, or the direct sonic radiation mixed with reflections from adjacent surfaces (especially  
floors, rear walls and side walls). These sound reflections can be either in or out of phase. What is coming in  
phase with the direct sonic radiation will reinforce the sound, and what is coming out of phase with the direct  
sonic radiation will weaken or cancel the sound.  
If reflections will inevitably occur due to a forced location, try to get as many reflections as possible to arrive in  
phase with the direct sonic radiation. In addition, it is highly recommended to ensure this is true throughout the  
entire working frequency range of the SUB-1500 (40- 120 Hz), because different frequencies have different  
lengths and movement (Refer to Advanced Operation for more information on phase adjustments).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Unpacking  
After unpacking the SUB-1500, you will have the SUB-1500 subwoofer, an AC mains power cable and this quick  
start guide. It is recommended to keep the original packaging material in the case that re-shipping becomes  
necessary.  
SUB-1500 Package Contents  
SUB-1500  
AC MAINS POWER CABLE  
QUICK START GUIDE  
AC MAINS  
POWER CABLE  
SUB-1500  
QUICK START GUIDE  
The Importance of Location  
As earlier mentioned, room acoustics have an enormous impact on the sound of speakers, especially  
subwoofers. A phenomenon called "standing waves" makes bass response uneven from place to place in your  
room. To experience with this yourself, put on a CD with a strong, consistent bass line. Notice how the volume of  
the bass goes up and down as you move around the room. Stand in one place and then squat down. You will  
probably notice that the bass changes in the vertical plane as well! Because a subwoofer's location affects how  
standing waves are created, the first step to getting accurate bass response is finding the right spots for your  
SUB-1500 and your listening position.  
Standing Waves  
Top Down View  
Sound travels  
along walls  
and distributes  
evenly through  
room.  
Most sound is  
distributed  
through the  
middle of the  
room leading to  
skewed standing  
wave presence.  
SUB  
SUB  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (cont.) Importance of Location  
Corner Placement  
This is the advice most often given because it usually yields a "loud" bass signal, however corner mounting  
also may cause the SUB-1500 to sound monotone and extra boomy on music. If excessive bass volume is  
your goal, this may be the answer for you and is worth trying.  
Corner Placement  
Highest Bass Output  
with "Boomy" Sound  
Lower Bass Output  
with  
Smoothest Sound  
Medium - High Bass  
Ouput with  
Smoother Sound  
ROOM  
ROOM  
ROOM  
Symmetrical Placement  
Avoid putting the SUB-1500 the same distance from two walls. For example, if you have a 20' wide room, don't  
put the SUB-1500 10' from each wall. Similarly, don't put the SUB-1500 at equal distances from the floor to  
ceiling. Instead, stagger the distances to each wall by at least 15%.  
Symmetrical Placement  
Elevate  
Subwoofer if  
possible  
Symmetrical  
Equal Distance from  
Either Wall  
Not Symmetrical  
Staggered by  
at least 15%  
ROOM  
ROOM  
ROOM  
Stand  
or  
15%  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (cont.) Importance of Location  
Quick and Basic Placement Method  
Finding the proper position for the SUB-1500 is actually quite simple. You'll be happy to know that it doesn't  
require any special test equipment either. The only problem is, once you find the correct position, you may not  
like where it is. That's because it might not be tucked conveniently away in a corner or along a wall where it's out  
of the way. In fact, in might very well be in the way of something you need to step around or over every time you  
walk by. So, after all is said and done, you may find that you'd rather subscribe to the "anywhere" theory of  
subwoofer placement after all. However, if you want to place your subwoofer in the proper position, read on.  
The quickest way to place your SUB-1500 is to wire it up and place it in your favorite listening position, or the  
position where you'll be listening most of the time. For a small audience, that would be the seating area, relatively  
aligned with the stereo spectrum (left and right loudspeakers). For the recording engineer, that would be the  
main chair that's positioned perfectly in the stereo spectrum. For a performer or KJ/DJ, it would be in the  
central audience area. Next, play some music with plenty of low frequency content and walk around the room. It's  
actually best to get on your hands and knees and crawl around with your ear to the floor, however that could lead  
to body strain, accidents, excessive sneezing and should only be performed carefully with another person around  
if possible. Either way, as you move around, listen carefully to the low frequencies. The proper place in the room  
for the SUB-1500 is where the lows sound the best. Once you've found that position, simply exchange yourself  
with the SUB-1500. If you find that you cannot live with the SUB-1500's optimal position, placing it in the corner  
is for many different reasons, the most universally accepted location.  
Loudspeakers and Proximity  
Although bass sounds are non-directional, cabinet resonance and other factors conspire to make this less true in  
practice than in theory. It'll be much easier to get seamless blending between SUB-1500 and main speakers if  
they are in close proximity to eachother.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiver/Amp  
Left  
Speaker  
Right Speaker  
Out  
Right  
Speaker  
Left Speaker  
Out  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the SUB-1500 (cont.)  
Connecting to a Device with No Pre-amp Outputs  
If no line-level pre-outs are available, you need to run the speaker cables from your main amplifier to the SUB-  
1500. Run the main LEFT and RIGHT speaker cables to the SUB-1500 HI-LEVEL IN binding posts. Be sure to  
double check that the polarity (-/+) on the receiver or amplifier matches the polarity on the binding posts of  
the subwoofer amplifier. Also, make sure that the - outputs on your main amp are true ground, otherwise you  
would short the output of your main amplifier. Call or email technical support if the - outputs on your main  
amplifier do not have true ground.  
Low-level Connection (RCA)  
The full-range signal is sent to the SUB-1500 via the line-level or pre-out RCA jacks from your receiver/mixer.  
The SUB-1500's adjustable low-pass filter feeds the specified low frequency range for SUB-1500 output.  
Benefit:  
RCA audio cables are less expensive that MDP cables. This is the quickest method of subwoofer connection  
Use if:  
Your connecting device is a pre-amp mixer with pre-outs.  
You have a receiver with a Subwoofer (LFE) Out jack.  
Low-Level Connection  
LINE  
IN  
OUT  
To Second  
Subwoofer/Pre-Amp/  
Amplifier or  
L
From  
Player/Pre-Amp/Mixer  
OPTIONAL  
Recording Device  
R
(LFE)  
Connecting to a Device with Separate Components  
If you only have one set of pre-outs on your receiver/mixer and need to send the signal to the SUB-1500 and  
another device, first send the signal to the SUB-1500 via the LINE IN (RCA) jacks. Next, from the LINE OUT  
(RCA) jacks, connect a patch cable to the AUDIO INPUT jacks on your other external device.  
Connecting to a Dolby Digital or DTS Receiver/Pre-amp  
All Dolby Digital and/or DTS processors have a subwoofer/LFE output. If you decide to use a subwoofer/LFE  
output connection (mono) to the SUB-1500, connect an RCA-plugged patch cable from the subwoofer/LFE  
output to either the "L" or "R" channels of the LINE IN jacks (RCA) on the SUB-1500.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: These inputs are typically used for connecting  
to a system that does not have "pre-out" or line level  
outputs available.  
NOTE: If the SUB-1500 unit does not receive an  
input signal for approximately 10 minutes, it will  
switch to stand by mode until it receives a further  
8. HI-LEVEL OUT jacks - These MDP binding posts are for  
direct connection to main system speakers or external devices.  
2. PHASE switch - This switch toggles the PHASE of the  
subwoofer with respect to the main speakers. If the  
subwoofer is out of phase with the main speakers, bass  
response is at a reduced performance level and may sound  
"weak". When all speakers are in phase, full-frequency  
response is at an optimal level.  
NOTE: These inputs are typically used for signal  
output to main speakers or for daisy chaining.  
3
4
1
2
5
6
7
8
9
10  
POWERED SUBWOOFER  
CAUTION  
VORSICHT  
WARNING  
110-120VAC~60Hz  
220-240VAC~50Hz  
300WATTS  
RISK OF FIRE  
REPLACE FUSE  
AS MARKED  
NOTES: PLEASE ENSURE THIS CONTROL IS SET  
CORRECTLY BEFORE PLUGGING IN AND POWERING  
ON THE SUB-1500. IF THIS CONTROL IS NOT SET  
CORRECTLY PRIOR TO USING THE SUB-1500, YOU  
MAY DAMAGE THE UNIT AND VOID YOUR  
5. LINE OUT jacks - These jacks provide a LINE-LEVEL  
connection to external mixers/amplifiers with LINE IN or  
LOOP RCA inputs.  
WARRANTY. SELECT 110V for North American based  
power and 240V for European based power.  
10. AC MAINS terminal - For connecting the SUB-1500 to  
your AC power outlet.  
6. LINE IN jacks - These jacks provide a LINE-LEVEL  
connection from external devices with LINE OUT, PRE-AMP,  
LFE or LOOP RCA outputs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering On Test  
With the VOLUME control at minimum (fully counter-clockwise) plug your SUB-1500's power cord into any AC  
compatible wall outlet. The red power indicator LED will stay on as long as the SUB-1500 is plugged-in. If for any  
reason you do not want your SUB-1500 on, simply place it in AUTO-MODE by moving the switch to AUTO to have  
it turn itself off after 10 minutes of inactivity, or unplug it.  
Please ensure that your receiver's loudness control is off and that the bass tone control is in its middle (flat or no  
boost) position. Now play some music with ample bass content.  
Adjust the VOLUME level for the SUB-1500 so that the output level is satisfactory relative to your front speakers.  
If either of your front speakers are not functioning properly, please postpone SUB-1500 installation until they are  
in working order to ensure a correct first attempt.  
Adjust the PHASE switch to determine which position sounds the most natural and powerful. The difference  
should be most audible in the mid-bass. If you cannot detect a difference, leave the PHASE switch in the + (in-  
phase) position. (see Advanced Operations for more on phase)  
Adjust the SUB-1500's CROSSOVER and determine what position sounds best. This feature controls the output  
level of the mid and lower bass frequencies.  
Please note that if you have hooked up the SUB-1500 to a Dolby Digital or DTS receiver via its LFE  
jack, due to the low pass filter already in the receiver, the SUB-1500's CROSSOVER control would  
be best left at the highest frequency (fully clockwise).  
The best VOLUME level, PHASE switch and CROSSOVER positions will mostly be determined by your room  
acoustics, the mid and upper bass frequency response characteristics of your front speakers, and your personal  
preferences. The source material will also play a significant role as its bass level and qualities may vary  
considerably.  
NOTE: If you have a Dolby Pro-Logic Home Theater system, we recommend that your receiver's  
center channel mode is in the NORMAL position. This will ensure that all low bass information is  
sent to your subwoofer.  
If you have a Dolby Digital (AC-3) or DTS Home Theater system, we recommend that you have correctly  
configured your receiver's Bass Management System so that all of your speakers are properly categorized as  
either SMALL or LARGE. This will ensure that all appropriate low bass information is sent to your subwoofer. As  
a general rule, a speaker with an 8" or greater diameter woofer may be considered LARGE. Conversely, a  
speaker with a woofer less than 8" in diameter may be considered SMALL  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Crossover and Phase  
In Phase  
0° PHASE 180°  
Lower  
Bass  
Higher/Tighter  
Mid-Bass  
Out of  
Phase  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Solution  
Problem  
• Check the subwoofer's volume setting and  
all connections. If your receiver has a  
subwoofer on/off or variable subwoofer  
output level control, ensure that the  
subwoofer option it is turned on and that  
the output level is at maximum.  
No Sound Only from Subwoofer  
• Make sure that the subwoofer's RCA  
cable is connected to the receiver's  
subwoofer output and not the subwoofer  
input jack.  
• Check: subwoofer volume / frequency /  
phase control positions; receiver tone  
controls; program material; ensure that  
the center channel mode on the receiver  
is in the NORMAL or SMALL position. If  
your receiver has a variable subwoofer  
output level control, ensure that the  
output level is at maximum.  
Too Little Bass  
• Try moving the subwoofer further into a  
corner or towards the wall.  
• Check: subwoofer volume / frequency /  
phase control positions; receiver bass /  
loudness controls; program material;  
move subwoofer further out of corner or  
away from wall.  
Too Much Bass  
• Check for faulty phono connecting cable.  
Hum  
• Try to separate phono cables from power  
cords (they can induce hum into the  
system). If that doesn't work, we  
recommend you turn off your subwoofer  
when it is not in use. This is most easily  
accomplished connecting its power cord  
to a switched power outlet on the back of  
your receiver.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taylor Thermometer 1471N 808N User Manual
Teac Computer Drive CD 224E R User Manual
TIMEX Weather Products Clock TM 04C User Manual
ToCAD Camcorder Accessories 9002TM User Manual
Toshiba Personal Computer L635 User Manual
Toshiba Projector TDP T420U User Manual
U Line Ice Maker Refrigerator Ice Maker Combos User Manual
Vivotek Digital Camera IP7138 User Manual
VocoPro Stereo Amplifier DA 3600Pro2 User Manual
Vox Music Pedal Valvetronix ToneLab SE User Manual