R
TM
THE SINGER'S ULTIMATE CHOICE
Features:
• All-in-One Design with 4-Speaker Cabinet Provides 100W Total
Power (Peak to Peak)
• Multi-Format Player with Direct Track Access Supports VCD, CDG,
MP3, Photo-CD, CD, CD-R, and CD-RW Formats
• AM/FM Radio Tuner with Programmable Preset Stations
• 1/4” Guitar and Keyboard Inputs with Individual Volume Controls
• Two 1/4”/XLR Microphone Inputs with Bass, Treble and Individual
Volume Controls
• Digital Echo, Repeat and Delay Controls for Vocal Enhancement
• 14-step Digital Key Controller to Transpose the Key of Built-in Disc
Player Audio
• Vocal Cancel and Partner Modes for Canceling Vocals from
Multiplexed Media
• 7-Band Equalizer for Precise Audio Adjustments and Room Tuning
• External Speaker Jacks with Internal/External Speaker Selector
• Remote Control for Easy Operation
• Inputs/Outputs: 2 A/V (RCA) inputs and 2 A/V (RCA)/ 1Pair
Balanced (XLR) outputs
•110V and NTSC-PAL Compatible for Worldwide Use
PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM
GIG MAN PLUS
MUSIC EQ
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
POWER
INPUT
+12dB
0dB
+12dB
BASS
TREBLE
ECHO
REPEAT
DELAY
0dB
DISC
TUNER
AV1
AV2
1
2
3
4
5
6
7
8
9
10
+10
-12dB
-12dB
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
MIC EFFECTS
PRESETS
PLAY
PAUSE
PBC
EJECT
MUSIC VOLUME
MIC VOLUME
VOCAL
CANCEL
EQ ON
STOP
PREV
NEXT
B-SCAN
F-SCAN
MUTE
L/R
REPEAT
EQ OFF
VOCAL
PARTNER
AM/FM
AUTO
PRESET
SEARCH
ST/MO
DIGITAL KEY CONTROLLER
GUITAR
AV2 INPUT
MIC1
MIC2
VOL1
VOL2
HEADPHONES
VOLUME
VOLUME
KEYBOARD
VOLUME
GIG MAN PLUS
PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
8. Ventilation - The appliance should be situated so its
location does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed,
sofa, rug, or similar surface that may block the
ventilation slots.
CAUTION
RISK OF SHOCK
9. Heat - The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.
CAUTION: To reduce the risk of electric shock,
do not remove cover (or back). No user-
serviceable parts inside. Only refer servicing to
qualified service personnel.
10. Power Sources - The appliance should be
connected to a power supply only of the type described
in the operating instructions or as marked on the
appliance.
Explanation of Graphical Symbols
The lightning flash & arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of danger.
11. Grounding or Polarization - Precautions should be
taken so that the grounding or polarization means of
an appliance is not defeated.
12. Power-Cord Protection - Power-supply cords
should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the appliance.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and servicing instructions.
WARNING
To reduce the risk of fire or electric shock, do
not expose this unit to rain or moisture.
13. Cleaning - Unplug this unit from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
14. Power lines - An outdoor antenna should be
located away from power lines.
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
15. Nonuse Periods - The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
16. Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into the
enclosure through openings.
3. Heed Warnings - All warnings on the appliance and in
the operating instructions should be adhered to.
17. Damage Requiring Service - The appliance should
be serviced by qualified service personnel when:
4. Follow Instructions - All operating and use
instructions should be followed.
A. The power supply cord or plug has been damaged; or
B. Objects have fallen into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
5. Attachments - Do not use attachments not
recommended by the product manufacturer as they may
cause hazards.
6. Water and Moisture - Do not use this unit near water.
For example, near a bathtub or in a wet basement and
the like.
18. Servicing - The user should not attempt to service
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
7. Carts and Stands - The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
Note:
7 A. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause an overturn.
To CATV system installer's (U.S.A.): This reminder is
provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected as close to the point of
cable entry as practical.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INFORMATION (U.S.A.)
CAUTION:
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
READ THIS BEFORE OPERATING YOUR UNIT
UNIT!: This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Vocopro may void your authority, granted by the FCC,
to use this product.
1. To ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future reference.
2. Install your unit in a cool, dry, clean place - away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers, v
motors). To prevent fire or electrical shock, do not expose to
rain and water.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable(s) supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your
FCC authorization to use this product in the U.S.A.
3. Do not operate the unit upside-down.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class "B" digital devices. Compliance with
these requirements provides a reasonable level of
assurances that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment
4. Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
5. Place the unit in a location with adequate air circulation.
Do not interfere with its proper ventilation; this will cause the
internal temperature to rise and may result in a failure.
generates/uses radio frequencies and, if not installed
and used according to the instructions found in the
owner's manual, may cause interference harmful to the
operation of other electronic devices. Compliance with
FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found
to be the source of interference, which can be
determined by turning the unit "Off" and "On", please try
to eliminate the problem by using one of the following
measures:
6. Do not use force on switches, knobs or cords. When
moving the unit, first turn the unit off. Then gently disconnect
the power plug and the cords connecting to other
equipment. Never pull the cord itself.
7. Do not attempt to clean the unit with chemical solvents:
this might damage the finish. Use a clean, dry cloth.
8. Be sure to read the "Troubleshooting" section on common
operating errors before concluding that your unit is faulty.
Relocate either this product or the device that is being
affected by the interference.
9. This unit consumes a fair amount of power even when the
power switch is turned off. We recommend that you unplug
the power cord from the wall outlet if the unit is not going to
be used for a long time. This will save electricity and help
prevent fire hazards. To disconnect the cord, pull it out by
grasping the plug. Never pull the cord itself.
Use power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter(s).
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300-ohm ribbon
lead, change the lead-in to coaxial type cable.
10. To prevent lightning damage, pull out the power cord
and remove the antenna cable during an electrical storm.
If these corrective measures do not produce satisfactory
results, please contact your local retailer authorized to
distribute Vocopro products. If you can not locate the
appropriate retailer, please contact Vocopro, 1728
Curtiss Court, La Verne, CA 91750.
11. The general digital signals may interfere with other
equipment such as tuners or receivers. Move the system
farther away from such equipment if interference is
observed.
NOTE:
Please check the copyright laws in your country
before recording from records, compact discs,
radio, etc. Recording of copyrighted material may
infringe copyright laws.
CAUTION
Voltage Selector (General Model Only)
The apparatus is not disconnected from the AC power
source so long as it is connected to the wall outlet,
even if the apparatus itself is turned off. To fully insure
that the apparatus is indeed fully void if residual power,
leave unit disconnected from the AC outlet for at least
fifteen seconds.
Be sure to position the voltage selector to match the
voltage of your local power lines before installing the
unit.
240V
120V
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome...
And Thank you for purchasing the GIG MAN PLUS from VocoPro, your ultimate choice
in Karaoke entertainment! With years of experience in the music entertainment
business, VocoPro is a leading manufacturer of Karaoke equipment, and has been
providing patrons of bars, churches, schools, clubs and individual consumers the
opportunity to sound like a star with full-scale club models, in-home systems and mobile
units. All our products offer solid performance and sound reliability, and to reinforce our
commitment to customer satisfaction, we have customer service and technical support
professionals ready to assist you with your needs. We have provided some contact
information for you below.
VocoPro
1728 Curtiss Court
La Verne, CA 91750
Toll Free: 800-678-5348
TEL: 909-593-8893
FAX: 909-593-8890
VocoPro Company Email Directory
Customer Service & General Information
Tech Support
Remember Our Website
new products, packages and promos. And while you're there don't forget to check out
our Club VocoPro for Karaoke news and events, chat rooms, club directories and even
a KJ Service directory!
We look forward to hearing you sound like a PRO, with VocoPro, your ultimate choice in
Karaoke entertainment.
FOR YOUR RECORDS
Please record the model number and serial number below, for easy reference, in case of loss or theft. These
numbers are located on the rear panel of the unit. Space is also provided for other relevant information
Model Number
Serial Number
Date of Purchase
Place of Purchase
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening For A Lifetime
Selecting fine audio equipment such as the unit you ve just purchased is only the start of
your musical enjoyment. Now it s time to consider how you can maximize the fun and
excitement your equipment offers. VocoPro and the Electronic Industries Association s
Consumer Electronics Group want you to get the most out of your equipment by playing it
at a safe level. One that lets the sound come through loud and clear without annoying
blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to a higher volume
of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
• Pay attention to the different levels in various recordings.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is included for your
protection.
Some common decibel ranges:
Level
Example
30
40
50
60
70
80
Quiet library, Soft whispers
Living room, Refrigerator, Bedroom away from traffic
Light traffic, Normal Conversation
Air Conditioner at 20 ft., Sewing machine
Vacuum cleaner, Hair dryer, Noisy Restaurant
Average city traffic, Garbage disposals, Alarm clock at 2 ft.
The following noises can be dangerous under constant exposure:
Level
Example
90
100
120
140
180
Subway, Motorcycle, Truck traffic, Lawn Mower
Garbage truck, Chainsaw, Pneumatics drill
Rock band concert in front of speakers
Gunshot blast, Jet plane
Rocket launching pad
-Information courtesy of the Deafness Research Foundation
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
AC Input Voltage:
110V
Audio Output Power:
AV1 AV2 Audio input sensitivity:
Video Input Sensitivity:
Mic Input Sensitivity:
Keyboard / Guitar Input Sensitivity:
Video Output Level:
50W+50W TOTAL (PEAK TO PEAK) THD=10%
300mV
1V
8mV
8mV
1V (PEAK TO PEAK)
500mV
Audio Output Level:
S/N Ratio:
60dB
FM
Frequency range:
Step Frequency:
Intermediate Frequency
Operating Temperature
ANT input impedance
30dB S/N sensitivity
S/N Ratio
87.5MHz—108MHz
50KHz
10.7MHz
-5—+70
75Ω unbalanced
10dBu
48dB at 60dBu/75KHzdev input
Distortion
3% at 60dBu
20dB
0dB at 1KHz/ref –9.95dB/50uS
20dB
50dB
35dB
50dB
50dB
Stereo separation
Emphasis at 10KHz
Double signal selectivity
Image rejection
AM rejection
I.F. rejection
Spurious response ration
AM
Frequency range
Step frequency
Intermediate frequency
Operating temperature
Antenna
530KHz—1710KHz
10KHz
450KHzupper heterodyne
-5—+70
loop antenna
26dB S/N sensitivity
S/N (PSOPHO A)
Distortion
67dBu/m
40dB at 80%mod
7% at 80%mod
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel descriptions
Front Panel
2
3
4
5
6
7
8
9
10
PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM
GIG MAN PLUS
MUSIC EQ
1
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
POWER
INPUT
+12dB
0dB
+12dB
BASS
TREBLE
ECHO
REPEAT
DELAY
0dB
DISC
TUNER
AV1
AV2
1
2
3
4
5
6
7
8
9
10
+10
-12dB
-12dB
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
MIC EFFECTS
PRESETS
PLAY
PAUSE
EJECT
MUSIC VOLUME
MIC VOLUME
VOCAL
CANCEL
EQ ON
STOP
PBC
PREV
NEXT
B-SCAN
F-SCAN
MUTE
L/R
REPEAT
EQ OFF
VOCAL
PARTNER
AM/FM
AUTO
PRESET
SEARCH
ST/MO
DIGITAL KEY CONTROLLER
GUITAR
MIC1
MIC2
VOL1
VOL2
AV2 INPUT
HEADPHONES
VOLUME
VOLUME
KEYBOARD
VOLUME
1. POWER button - This button is used to turn the GIG MAN PLUS ‘ON’ or place it in STANDBY mode.
NOTE: When in STANDBY mode, the GIG MAN PLUS is not completely powered down and it still contains residual
power.
2. INPUT button - This button toggles through all of the INPUT channels (DISC, TUNER, AV1, AV2) for available INPUT
SOURCES.
3. 7-BAND GRAPHIC EQUALIZER - This GRAPHIC EQ is used to BOOST and/or CUT particular frequencies from
SOURCE MUSIC output. Each slide fader processes a particular frequency range indicated by the number above it.
Frequencies from 30Hz - 120Hz constitute the very low to low range. Frequencies from 120Hz to 1kHz are the mid-
range and frequencies from 1kHz to 16kHz make up the high to very high range. To adjust, slide the fader up to
boost the frequency presence or down to cut the frequency presence.
4. GRAPHIC DISPLAY panel - This panel displays all graphical information regarding system operations, settings and
performance.
5. DIRECT TRACK ACCESS buttons - These buttons allow for DIRECT TRACK selection. For tracks 10 and up, press
the +10 button. For example, to go directly to track 13, you would press +10 and 3, and for track 22, you would
press +10, +10 and 2.
6. REMOTE SENSOR - This sensor receives infrared signals transmitted by the REMOTE CONTROL transmitter.
NOTE: Obstacles located between the remote control and remote sensor should be avoided as they can prevent
signal recognition.
7. BASS control - This control increases/decreases the amount of LOW frequency response applied to the MASTER
VOLUME output.
8. TREBLE control - This control increases/decreases the amount of HIGH frequency response applied to the
MASTER VOLUME output.
9. ECHO LEVEL control - This control adjusts the level of ECHO applied to the MIC channels. Turn control clockwise to
INCREASE and counter-clockwise to DECREASE level.
10. REPEAT control - Use this control to adjust the REPEAT setting of the ECHO effect. As REPEAT adjusts the total
number of echo intervals prior to fade-out, the more REPEAT that is applied, the more ECHO intervals will occur
prior to fade-out. Turn control clockwise to INCREASE and counter-clockwise to DECREASE level.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel descriptions cont
Front Panel
13 14 15
16 17 18 19 20 21 22
12
11
PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM
GIG MAN PLUS
MUSIC EQ
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
POWER
INPUT
+12dB
0dB
+12dB
BASS
TREBLE
ECHO
REPEAT
DELAY
0dB
DISC
1
2
3
4
5
6
7
8
9
10
+10
TUNER
AV1
-12dB
-12dB
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
MIC EFFECTS
PRESETS
AV2
PLAY
PAUSE
EJECT
MUSIC VOLUME
MIC VOLUME
VOCAL
CANCEL
EQ ON
STOP
PBC
PREV
NEXT
B-SCAN
F-SCAN
MUTE
L/R
REPEAT
EQ OFF
VOCAL
PARTNER
AM/FM
AUTO
PRESET
SEARCH
ST/MO
DIGITAL KEY CONTROLLER
GUITAR
MIC1
MIC2
VOL1
VOL2
AV2 INPUT
HEADPHONES
VOLUME
VOLUME
KEYBOARD
VOLUME
11. DELAY control - Use this control to adjust the DELAY setting of the ECHO effect. As DELAY adjusts the total begin-
to-end length of each echo interval, the more DELAY that is applied, the longer each ECHO interval will take to com-
plete. Turn control clockwise to INCREASE and counter-clockwise to DECREASE level.
12. MUSIC VOL. control - This control increases/decreases the MUSIC VOLUME level. Turn clockwise to increase
MUSIC VOLUME and counter-clockwise to decrease the MUSIC VOLUME.
13. PLAY button - This button is used to initiate disc PLAYBACK.
14. PAUSE button - This button is used to PAUSE disc PLAYBACK.
15. PREV / NEXT buttons - These buttons are used to either go back to a PREVIOUS track or advance to the NEXT
track on a disc during playback.
16. B-SCAN / F-SCAN buttons - These buttons are used to SCAN either BACKWARD or FORWARD through tracks
on a disc during playback. NOTE: Using the B-SCAN and F-SCAN buttons during the playback of a CDG disc while
performing Karaoke is not recommended, as it will cause the onscreen lyrics to scramble.
17. MUTE button - Press this button to SILENCE audio playback. Press a second time to return to audio playback.
18. AUDIO button - This button will cycle between three AUDIO PLAYBACK MODES: STEREO, LEFT/LEFT and RIGHT/
RIGHT. In STEREO mode, audio playback is standard L/R audio. In L/L mode, the right channel is removed and
replaced with a duplicate left channel. In R/R mode, the left channel is removed and replaced with a duplicate right
channel.
19. REPEAT button - Press once to access the REPEAT selection window, press twice to select TRACK REPEAT (REP-
ONE) mode and press a third time to select DISC REPEAT (REP-ALL) mode.
20. DISC tray - This tray is used for inserting and removing discs. The DISC TRAY is operated with the EJECT button.
21. EJECT button - This button is used to OPEN/CLOSE the DISC tray.
22. VOCAL CANCEL button - This feature is used to cancel out the lead vocal layer on a multiplex format CD+G or
VCD disc. In order for this feature to work, the disc must be multiplex formatted. To activate, press the VOCAL
CANCEL button once to remove the lead vocal layer. Press a second time, and the lead vocal layer will be rees-
tablished. NOTE: If you try to utilize this feature while a standard or non-multiplex disc is playing, it will not work as
this feature is designed to work with multiplex discs only.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel descriptions cont
Front Panel
PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM
GIG MAN PLUS
MUSIC EQ
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
POWER
INPUT
+12dB
0dB
+12dB
BASS
TREBLE
ECHO
REPEAT
DELAY
0dB
DISC
TUNER
AV1
AV2
23
24
1
2
3
4
5
6
7
8
9
10
+10
-12dB
-12dB
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
MIC EFFECTS
PRESETS
PLAY
PAUSE
EJECT
MUSIC VOLUME
MIC VOLUME
VOCAL
CANCEL
EQ ON
STOP
PBC
PREV
NEXT
B-SCAN
F-SCAN
MUTE
L/R
REPEAT
EQ OFF
VOCAL
PARTNER
AM/FM
AUTO
PRESET
SEARCH
ST/MO
DIGITAL KEY CONTROLLER
GUITAR
MIC1
MIC2
VOL1
VOL2
AV2 INPUT
HEADPHONES
VOLUME
VOLUME
KEYBOARD
VOLUME
25
23. VOCAL PARTNER button - This feature acts very similar to the vocal cancel feature, but with an added voice
activation feature that acts like a vocal “auto-pilot”. When you enable the VOCAL PARTNER feature, the lead vocal
layer will be removed as long as you are singing into the microphone. When you stop singing into the microphone,
the lead vocal layer will automatically be added back into the music. To activate VOCAL PARTNER, press button
once. To remove VOCAL PARTNER, press a second time.
NOTE: If you try to utilize this feature while a standard or non-multiplex disc is playing, it will not work as this fea-
ture is designed to work with multiplex discs only.
24. MIC VOLUME control - This control is the Master MIC VOLUME level for all microphone output. Turn clockwise to
increase and counter-clockwise to decrease.
25. AV2 INPUT jacks (RCA) - These jacks are for connecting AUDIO/VIDEO OUTPUT from an external AV SOURCE.
Connect an RCA-style AV cable (R, W, Y) from these jacks to the AV OUTPUT jacks on your external AV device.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel descriptions
Rear Panel
2
3
4
5
6
7
1
AV1 INPUT
R
L
VIDEO
ON
FM/ANT
INPUT
AM/ANT
INPUT
OFF
Power
Commutator
VCD+CDG COMBO Model: GIGMAN PlUS
VOCOPRO
Rated:AC~115/230V,50/60HZ, 70W
Class1 Laser Product
This product complies with DHHS Rules21CFR Chapter1,
BALANCED AUDIO OUTPUT
BALANCED MIC OUTPUT
MIC 1 MIC 2
Subchapter
J
Made in China
Manufactured Date:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
Conditions:(1)This device may not cause harmful
Interference,and (2)This device must accept any
interference that may cause undesired operation
T2A/125V
SPEAKER
8
Ω
VIDEO
OUT
AUDIO
OUT
U
US
L
C
L
LISTED
AC IN
R
(AUDIO PRODUCT)
XXXX
AC115V
50/60GHZ
INT
EXT
Speacker Selector
R
L
8
9
10
11
12 13
1. FM Antenna Input - Connect the FM antenna here
2. AM Antenna Input - Connect the AM antenna here
3. FUSE terminal - This terminal houses the GIG MAN PLUS’ main system FUSE. NOTE: If fuse replacement is neces-
sary, only replace with the same type and rating of fuse.
4. POWER switch - This switch turns the GIG MAN PLUS’ MAIN POWER ON/OFF.
5. BALANCED AUDIO OUTPUT jacks - These XLR jacks are for connecting MASTER output to an external device with
balanced cables.
6. BALANCED MIC 1-2 INPUT (XLR) - These jacks are for connecting microphones via BALANCED XLR-type micr-
ophone cables.
NOTE: Both the XLR and ¼” MIC jacks cannot be used simultaneously for any given mic channel.
7. AV 1 INPUT jacks - These jacks are for connecting AUDIO/VIDEO OUTPUT from external AV SOURCES. Connect
RCA-style AV cables (R, W, Y) from these jacks to the AV OUTPUT jacks on your external AV devices.
8. INTERNAL/EXTERNAL SPEAKER selector - This selector toggles the GIG MAN PLUS’ master output to be played
through either the BUILT-IN speakers or EXTERNAL speakers connected to the EXTERNAL SPEAKER CONNECTORS.
NOTE : You cannot playback from both INTERNAL and EXTERNAL speakers simultaneously.
9. EXTERNAL SPEAKER connectors - These connectors are for connecting EXTERNAL SPEAKERS to be used for
playback instead of the BUILT-IN SPEAKERS. NOTE : Only connect one 8-ohms rated speaker to each speaker
connector.
10. AC POWER outlet - This outlet provides AC POWER to an external device. NOTE: Do not connect any device with
a power consumption level higher than 200W.
11. AC~IN terminal - Connect AC MAIN POWER CORD from the wall outlet to this terminal.
12. VIDEO OUT 1-2 jacks (RCA) - These jacks are for connecting the GIG MAN PLUS’ VIDEO OUTPUT to TV or
DISPLAY devices. Connect RCA-type patch cables from these jacks to the VIDEO INPUT jacks on the TV or display
devices.
13. AUDIO OUT 1-2 jacks (RCA) - These jacks are for connecting the GIG MAN PLUS’ AUDIO OUTPUT to amplifier,
recording or mixing devices. Connect paired RCA-type patch cables from these jacks to appropriate INPUT jacks on
external audio devices.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control descriptions
4. SET A/B button - This feature allows you to
select a section of the disc for repeat playback.
While a disc is playing, press the A/B button
once to select the beginning point of the sele-
ction. Press the A/B button again to select the
end point of the selection. Playback of the
selection will start automatically. Press the A/B
button again to cancel this feature and return to
normal playback.
Remote Control
3
2
1
6
4
5
7
SLOW
AM/FM
5. BOOKMARK button - Press the BOOKMARK
button to set a memory point on the disc. Press
the RESUME button at any time to jump to the
BOOKMARK point and resume playback.
9
VIDEO
AUTO
10
11
13
PRESETS
AUDIO
ST/MO
8
6. PROGRAM button - Press this button to enter
track PROGRAM mode. The disc must be
stopped to enter PROGRAM mode. See the
PROGRAM function in the Advanced Operation
section of this manual for a detailed explanation
of this feature.
12
PRESET/SEARCH
7. MUTE button - Press this button to MUTE or
silence the audio track during playback. Press
MUTE a second time to restore the audio
playback.
DISC
AV1
AV2
CANCEL
VOCAL
8. NUMBER pad - Use these buttons for direct
track selection, selecting tracks in program
mode or any other occasion where numeric entry
is needed. The +10 button adds 10 to the track
number each time it is pressed: 10, 20, 30 etc.
TUNER
PARTNER
9. SLOW button - Press this button to playback in
slow motion. Press SLOW to cycle through the 4
available playback speeds: 1/2 speed, 1/4
speed, 1/8 speed and normal. Press the PLAY
button to cancel slow-motion playback.
10. VIDEO button - Use this button to select
between NTSC/PAL video modes. For U.S.,
Mexico, and Canada, select NTSC. For
European countries, select PAL.
11. AUDIO button - This button is used to select
the audio playback mode: LEFT/LEFT, RIGHT/
RIGHT and STEREO
1. POWER button - This button is used to turn the GIG MAN
PLUS ‘ON’ or place it in STANDBY mode.
NOTE: When in STANDBY mode, the GIG MAN PLUS
is not completely powered down and still contains residual
power.
12. STEP button - Press this button to playback
the video one frame at a time. Each press of
the step button will advance the video one
frame. Press the PLAY button to return to
normal playback.
2. STOP button - This button is used to STOP disc PLAY-
BACK.
13. RESUME button - This button is used to jump
to the point on the disc previously marked using
the BOOKMARK feature.
3. OPEN/CLOSE button - This button is used to OPEN/
CLOSE the DISC tray.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control descriptions cont
17. MODE button - Press this button to display
Remote Control
the first nine tracks’ information on the video
display.
NOTE: This function is only available with VCD
media.
18. DIGITAL KEY CONTROL button - These
buttons direct the DIGITAL KEY CONTROLLER
SLOW
AM/FM
# - Raises the musical key a half step each time
it is pressed.
VIDEO
AUTO
PRESETS
- Resets the musical key to it’s original key.
AUDIO
ST/MO
15
14
16
b - Lowers the musical key a half-step each time
17
19
it is pressed.
19. RETURN button - Press this button to return
to the point on the disc selected with the
BOOKMARK feature. Press it again to RETURN
to normal playback.
18
20
21
PRESET/SEARCH
20. OSD button - Press this button to display
the DISC PLAYBACK STATUS on the video dis
play. Pressing this button repeatedly cycles
between showing the TRACK TIME REMAINING
and TOTAL DISC TIME REMAINING.
23
22
DISC
AV1
AV2
CANCEL
VOCAL
24
25
TUNER
21. << and >> buttons - Pressing these buttons
during playback causes the GIG MAN PLUS to
skip rapidly BACKWARDS or FORWARDS
through the track being played. Video playback
is maintained, allowing you to search for a
particular passage within a track. Continuing
to hold these buttons down causes the search
to progress faster.
PARTNER
22. PLAY/PAUSE button - This button PLAYS and
PAUSES disc playback.
23. |<< and >>| buttons - Pressing these buttons
during playback causes the GIG MAN PLUS to
skip to the PREVIOUS or NEXT track on a DISC
during playback.
14. PBC button - When playing a 2.0 compatible VCD disc,
an MP3 or PHOTO-CD disc, press this button to enable
PBC control for direct track selection, menu support and
auto-playback.
24. GOTO buttons - Allows direct selection of the
playback point on the disc. See the GOTO
function in the Advanced Operation section
of this manual for a detailed explanation of this
feature.
15. REPEAT button - Press this button once to have the
currently selected track play again (repeat) after it
completes. Press REPEAT a second time and the entire
disc will be replayed once. Press REPEAT a third time to
turn REPEAT mode off.
25. SOURCE buttons - Use these buttons so
select the active input source.
16. FREEZE button - Press this button to FREEZE the video
playback on the current frame without freezing the audio
playback.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control descriptions cont
27. VOCAL PARTNER button - This feature acts
Remote Control
very similar to the vocal cancel feature, but with
an added voice activation feature that acts
like a vocal “auto-pilot”. When you utilize the
VOCAL PARTNER feature, the lead vocal layer
will be removed as long as you are singing into
the microphone. When you stop singing into
the microphone, the lead vocal layer will
automatically be added back into the music. To
activate VOCAL PARTNER, press button once.
To remove VOCAL PARTNER, press a second
time.
SLOW
AM/FM
VIDEO
AUTO
NOTE: If you try to utilize this feature while a
standard or non-multiplex disc is playing, it will
not work as this feature is designed to work on
multiplex format discs only.
PRESETS
AUDIO
ST/MO
Using the Remote Control
When operating the remote control, point the top
of the remote control toward the GIG MAN PLUS’
remote sensor on the front panel and ensure that
there is a clear line of sight between the remote
control and GIG MAN PLUS’ void of obstacles in
order to prevent signal deflection
PRESET/SEARCH
DISC
AV1
AV2
CANCEL
VOCAL
26
27
TUNER
23 feet
PARTNER
When to replace the batteries
The maximum operational distance between the
remote control and the sensor is approximately 23
feet. If the remote only operates at shorter
distances, it is time to replace the batteries.
Installing the batteries
To install the batteries, first remove the battery
compartment lid from the back of the remote
control. Insert two AAA batteries, ensuring that the
polarities are aligned correctly.
26. VOCAL CANCEL button - This feature is used to cancel
out the lead vocal layer on a 2-channel multiplex CD+G or
VCD disc. In order for this feature to work properly, the
disc must be multiplex formatted. Press the VOCAL
CANCEL button once to remove the lead vocal layer.
Press a second time, and the lead vocal layer will be
reestablished.
NOTE: If you try to utilize this feature while a standard or
non-multiplex disc is playing, it will not work as this
feature is designed to work with multiplex format discs
only.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM Tuner descriptions
Front Panel
2
1
PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM
GIG MAN PLUS
MUSIC EQ
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
POWER
INPUT
+12dB
0dB
+12dB
BASS
TREBLE
ECHO
REPEAT
DELAY
0dB
DISC
TUNER
AV1
AV2
1
2
3
4
5
6
7
8
9
10
+10
-12dB
-12dB
60Hz 200Hz 400Hz 1KHz
3KHz 6KHz 16KHz
MIC EFFECTS
PRESETS
PLAY
PAUSE
EJECT
MUSIC VOLUME
MIC VOLUME
VOCAL
CANCEL
EQ ON
STOP
PBC
PREV
NEXT
B-SCAN
F-SCAN
MUTE
L/R
REPEAT
EQ OFF
VOCAL
PARTNER
AM/FM
AUTO
PRESET
SEARCH
ST/MO
DIGITAL KEY CONTROLLER
GUITAR
MIC1
MIC2
VOL1
VOL2
AV2 INPUT
HEADPHONES
VOLUME
VOLUME
KEYBOARD
VOLUME
5
6
7
4
3
1. INPUT SELECTOR - Use this button to turn on the radio. This button toggles through all the INPUT channels (DISC,
TUNER, AV1, AV2) for available INPUT SOURCES. Press the button until the TUNER light is on.
2. Preset Buttons - Use these buttons to program and select the radio preset stations. To program a station, hold
down a number button for 3 seconds while on the desired station. The screen will display the number once it has
been programmed. To jump to a preset station simply press that number button.
3. AM/FM button - Use this button to toggle between AM and FM radio modes.
4. AUTO button - The AUTO search button automatically scans through all stations and stops when a station’s signal is
strong and clear.
5. < PRESET > buttons - Use these buttons to search through the stations that you have programmed as presets.
Use the < button to search backwards and the > button to search forwards.
6. < SEARCH > buttons - Use these buttons to manually search through all radio stations. The tuner must be set to
FM mode to search through FM radio stations and it must be set to AM mode to search through AM radio stations.
Hold the preset buttons down to activate rapid scan.
7. ST/MO button - Select between Stereo (ST) and MONO (MO) audio output modes.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM Tuner descriptions cont
1. Preset Buttons - Use these buttons to program and
Remote Control
select the radio preset stations. To program a
station, hold down a number button for 3 seconds
while on the desired station. The screen will display
the number once it has been programmed. To jump
to a preset station simply press that number button.
1
2. AM/FM button - Use this button to toggle between
2
3
4
AM and FM radio modes.
SLOW
AM/FM
3. SEEK (AUTO) button - The AUTO search button
automatically scans through all stations and stops
when a station’s signal is strong and clear.
VIDEO
AUTO
PRESETS
AUDIO
ST/MO
4. ST/MO button - Select between Stereo (ST) and
MONO (MO) audio output modes.
5. < PRESET > buttons - Use these buttons to search
through the stations that you have programmed as
presets. Use the < button to search backwards and
the > button to search forwards.
6
5
PRESET/SEARCH
6. < SEARCH > buttons - Use these buttons to
manually search through all radio stations. The
tuner must be set to FM mode to search through FM
radio stations and it must be set to AM mode to
search through AM radio stations. Hold the preset
buttons down to activate rapid scan.
DISC
AV1
AV2
CANCEL
VOCAL
TUNER
7
PARTNER
7. TUNER SELECTOR - Use this button to turn on the
radio.
NOTE: When the tuner is active, the CD tray cannot
be opened.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting connected
AV Input Connections
To connect an AV source player, use an RCA-type AV cable with red, white and yellow colored plugs.
For AUDIO, connect the L and R AUDIO OUTPUT jacks from the source player to the L (white) and R (red) AUDIO INPUT
jacks on the GIG MAN PLUS, using the AV channel of your choice.
For VIDEO, connect the VIDEO OUTPUT jack on the source player to the yellow VIDEO INPUT jack on the GIG MAN PLUS,
using the same channel you connected the audio to.
To Audio In
AV Input
AV2 INPUT
To Video In
To Video Out
To Audio Out
A /V D e v ic e
Audio Output Connections
To connect audio output to external devices, there are three available channels: AUDIO OUTPUT 1 & 2 (RCA) and BAL-
ANCED AUDIO OUTPUT (XLR). All three OUTPUTS can be connected simultaneously
For AUDIO OUTPUT 1 & 2, using an RCA-type audio cable, connect the left and right AUDIO/LINE/AUX INPUT jacks on
the external device to the left and right AUDIO OUTPUT 1 or 2 jacks on the GIG MAN PLUS.
For BALANCED AUDIO OUTPUT, using two XLR-type audio cables, connect the left and right AUDIO/LINE IN jacks on the
external device to the left and right BALANCED AUDIO OUTPUT jacks on the GIG MAN PLUS’ rear panel.
Audio Output
L
R
External Amplifier
VIDEO
OUT
AUDIO
OUT
To Audio In
To Audio In
POWERED STAGE
MONITORS
Recording Device
Video Output Connections
The GIG MAN PLUS has two VIDEO OUTPUT channels with RCA-type jacks for connection to TV’s or monitor devices.
To connect VIDEO, using an RCA-type patch cable, connect the VIDEO IN jack of your television or monitor device to
either the VIDEO OUT 1 or 2 jacks on the GIG MAN PLUS. Both VIDEO OUTPUTS can be connected simultaneously
Video Output
VIDEO
OUT
AUDIO
OUT
STAGE
TV
To Video In
L
AUDIENCE
TV
To Video In
R
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting connected cont
Microphone/Instrument Input Connection
After making your main system connections, it is time to get your microphones and instruments connected and ready
for performing. Before you get started with your connections we recommend that you take the following tips into
consideration:
•When connecting instruments, refrain from using defective cables as they can cause significant noise and
loud pops, posing a threat to system speakers.
•When using effects devices for instruments, such as pedals/stomp boxes, use caution when connecting
a chain of multiple effects devices as the output voltage may change and possibly overload the GIG MAN PLUS’
input channel.
•When connecting a guitar, longer cables are recommended to prevent guitar feedback from occurring
The GIG MAN PLUS has one guitar (1/4”), one keyboard (1/4”) and two microphone (1/4”/XLR). Remember that
both the XLR and ¼” cannot be used simultaneously.
To connect MICROPHONES via ¼” mic cables, connect the XLR-end of the cable into the MICROPHONE until it locks into
place and connect the ¼” plug into either of the MIC 1 or 2 jacks on the GIG MAN PLUS.
To connect MICROPHONES via XLR mic cables, connect the XLR-F end of the cable into the MICROPHONE until it locks
into place and connect the XLR-M end into either of the BALANCED MIC 1 or 2 jacks on the GIG MAN PLUS’ rear
panel.
To connect a GUITAR, connect a ¼” instrument cable from the GUITAR’s ¼” output to the GIG MAN PLUS’ ¼” GUITAR
input.
To connect a KEYBOARD, connect a ¼” instrument cable from the KEYBOARD’s ¼” output to the GIG MAN PLUS’ ¼”
KEYBOARD input.
Instruments
To Mic 1 Input
To Mic 2 Input
*The Balanced XLR
Mic Inputs on the Rear
Panel Can Be Used
Instead of the 1/4" Mic
Inputs
AC Device Connections
The GIG MAN PLUS has an AC power outlet on the rear panel to provide power to a connecting device. Please note
that a device with a power consumption rating over 200W should not be connected as that exceeds the
allowable power feed. Doing so may cause serious damage to both devices and may void your warranty.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting connected cont
Speaker Connection
The GIG MAN PLUS has a set of speaker connectors for connection to external speakers. Remember that only
speakers with an impedance rating of 8 ohms should be connected.
To connect speakers, first unlock the plastic fasteners on each speaker connector by pushing downward on them.
Then strip approximately a 1 /2” (1.27cm) of insulation from the speaker wire ends and twist the strands so that they
can easily slide through the holes. Once a wire is inserted, lock them in place with the fasteners by pushing upward on
them. It is easy to over-insert a wire into a speaker connector so that the insulation is inserted as well. To ensure this
doesn’t happen, only insert the wires to the point where you can still see the edge of the insulation.
Speakers
SPEAKER 8
*Set to EXT for
External Speaker
Output
INT
EXT
Speacker Selector
R
L
AM/FM Antenna Connection
Connecting the FM Antenna to the GIG MAN PLUS
The FM antenna looks like a thin wire with a gray plastic plug at one end. To connect the FM antenna to the GIG MAN PLUS,
insert the gray plug into the FM antenna receptacle.
AM/FM
AM
AV1 INPUT
L
R
VIDEO
FM
ON
FM/ANT
INPUT
AM/ANT
INPUT
OFF
Power
Commutator
L
R
VIDEO
AV2 INPUT
VCD+CDG
VOCOPRO
COMBO Model: GIGMAN PlUS
BALANCED AUDIO OUTPUT
BALANCED MIC OUTPUT
Rated:AC~115/230V,50/60HZ, 70W
Class1 Laser Product
This product complies with DHHS Rules21CFR Chapter1,
MIC
1
MIC
2
Subchapter
J
Made in China
Manufactured Date:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
Conditions:(1)This device may not cause harmful
Interference,and (2)This device must accept any
interference that may cause undesired operation
T2A/125V
SPEAKER
8
Ω
VIDEO
OUT
AUDIO
OUT
U
US
L
C
L
LISTED
AC IN
R
(AUDIO PRODUCT)
XXXX
AC115V
50/60GHZ
INT
EXT
Speacker Selector
R
L
Connecting the AM Antenna to the GIG MAN PLUS
The AM antenna has a braided wire connected to a large oval shaped plastic antenna. The opposite end has two exposed cop-
per-colored wires.
To connect this antenna, press down the tabs on the AM antenna receptacle on the back of the GIG MAN PLUS. Now insert
the copper-colored wires into each side of the receptacle and then release the tabs to secure the wires in place.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic and advanced operations
Preparing a Disc for Playback
Turn the power on by pressing the POWER button on the front panel. Press the OPEN/CLOSE button to open the disc
tray. Insert a disc into the round recess in the tray with the label side up.
Playing a Disc
Press the PLAY/PAUSE button on the front panel or the remote control to begin disc playback. Press the PREV/NEXT
buttons to skip to the beginning of the previous or next track. Press the STOP button to cease playback of the disc.
Selecting a Playback Starting Point
To select a playback starting point, press the GOTO button on the Remote Control. Using the 0-9 number keys, enter the
start point in minutes and seconds format (for example 3320 to start playback at 33 minutes and 20 seconds from the
start of the disc). Playback will start automatically when the last digit is entered.
Customizing Audio Playback for MPX Media
Multiplexed discs are specially recorded so that the vocals can be removed for Karaoke. These discs are recorded with
the vocals on the right channel only. When the right channel is bypassed and the left channel is split to both sides, the
vocals disappear, leaving the music only. The AUDIO button on the GIG MAN PLUS’ front panel and remote control allows
you to select through 3 audio playback modes: LEFT CHANNEL ONLY, RIGHT CHANNEL ONLY AND BOTH (STEREO). To
select, press the AUDIO button repeatedly.
Muting Playback
Pressing the MUTE button on the remote control silences the audio during playback of a disc. Press the MUTE button
again or either of the VOLUME buttons to restore audio playback.
Displaying the Remaining Time
While the disc is playing, pressing the OSD button on the remote control will display the disc’s playback status. Press the
OSD button to cycle between TRACK TIME REMAINING and DISC TIME REMAINING.
Programming a Playback Sequence
Press the PROGRAM button to enter PROGRAM mode. Using the number buttons (0-10, +10), enter the track numbers
to be played. Press the PLAY button to begin playback of the programmed sequence. Note: Program mode cannot be
entered while a disc is playing.
Repeat Playback
To repeat a track/scene press REPEAT once.
To repeat a disc/title press REPEAT twice.
To cancel REPEAT mode, either press the PLAY button, or cycle through the REPEAT options till REPEAT is turned OFF.
Repeating a Segment Using the A-B Feature
The starting point of the LOOP region is immediately commenced after pushing A-B. Press the A-B button again to estab-
lish the LOOP ending point.
To cancel the A-B loop Press the A-B button a third time.
Note: You cannot search and skip tracks while using the A-B feature.
Programmed Playback
You can select up to 99 tracks to program. The program is maintained until the STOP button is pressed twice or the unit
is turned on or off.
Use the number buttons to select a track. Once selected, press PROGRAM to enter it into the program. Repeat this
procedure till you are complete with your program. To start playback of a disc press PLAY. You can cancel a program by
pressing the STOP button twice, removing the disc or turning off the unit. This function does not work unless you turn
PBC on.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM tuner operations
See the AM/FM Tuner Controls and Functions section of this manual for locating the buttons.
Turning on the Radio
Make sure that the GIG MAN PLUS’ power is on. Press the INPUT selector button until the TUNER light is on. This will
turn the radio on. Using the Remote, simply press the TUNER button on the remote to turn on the radio.
NOTE: When the radio is on, the GIG MAN PLUS is unable to play CDs.
Switching Between AM/FM
Use the AM/FM (Also the SLOW) button to switch between the AM and FM frequencies.
Selecting Radio Stations
Before choosing a station, be sure that the proper frequency (AM or FM) is selected. Use the SEARCH arrows ( <
and >) to search through radio stations. The back arrow or < (also the B-SCAN) button, searches backwards and the
forward arrow or > (also the F-SCAN) button searches forwards.
Example:
If you wan’t to listen to 106.7 FM, you would press the AM/FM button until FM shows on the Graphic Display Panel.
Then you would press the search button until 106.7 was shown on the Graphic Display Panel
1
2
3
4
5
6
7
8
9
10
+10
PRESETS
Using the Auto Search Function
The Auto Search function rapidly scans through all radio stations and stops whenever there is a station with a strong
and clear signal. To begin auto search, simply press the AUTO button on the GIG MAN PLUS or on the remote.
Setting Preset Stations
With the GIG MAN PLUS you can store up to 20 stations, in each band (AM and FM), as presets for instant access
using the DIRECT TRACK ACCESS number keys.
To set a preset for a station
Simply hold down the desired number key for 3 seconds while the radio is set to that station.
For example: To set 106.7 FM as preset 1, set the radio to 106.7 and then press and hold the “1” button for 3
seconds. When the station has been programmed sucessfully, the display screen will show a “1” next to the station
number.
1
2
3
4
5
6
7
8
9
10
+10
PRESETS
20
Download from Www.Somanuals.com. All Manuals Search And Download.
AM/FM tuner operations cont
To preset a station higher than 10
While on the desired station, first press the +10 button and then press and hold down the desired number button.
For Example: To set 101.1 as preset 15, set the radio to 101.1, press the +10 button and then press and hold the
5 button for three seconds. When the station has been programmed sucessfully, the display screen will show a “15”
next to the station number.
1
2
3
4
5
6
7
8
9
10
+10
PRESETS
Manually Searching Through Preset Stations
Use the PRESET arrows ( < PRESET >) to search through your preset stations. The back arrow or < (also the PREV)
button,
searches backward and the forward arrow or > (also the NEXT) button searches forward.
Selecting Between Stereo and Mono Modes
Use the ST/MO button to switch between Stereo and Mono radio modes. If the station you are listening to is weak or
not that clear, it is best to use MONO mode as that could improve the clearness of the station.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Mp3 functions and operations
The GIG MAN PLUS can play back MP3’s files recorded to CD-ROM, CD-R or CD-RW discs.
Notes on MP3 Discs
An MP3 file stores audio data that has been compressed using the MPEG1 encoding scheme. Although PC
terminology uses “files” and “folders” regarding MP3s and storage, in this manual we refer to them as “tracks and
albums”.
Notes on Playing MP3s
An MP3 track must be recorded on a disc in the format compliant with ISO9660. Track order may differ from
MP3 player to MP3 player.
The maximum allowable number of tracks and/or albums located on a disc is 900, including the root albums
(directory).
The maximum allowable depth of a nested folder is 127, including files.
If a disc contains both audio as well as MP3 tracks, it will not play in the GIG MAN PLUS.
Multi-session discs are limited to a total of 20 sessions.
MP3 playback is optimal with MP3s encoded with a sampling rate of 44.1 kHz and a fixed bit rate of 128 Kbps.
The unit may not play MP3 tracks recorded using a packet writing utility.
The unit can only play back MP3 tracks having a file extension of “.mp3”.
It may take 30 seconds or more before the unit can start playback of MP3’s. This time depends on the number of
recorded tracks and the complexity of the album tree.
If you play a non-MP3 track that has the “.mp3” file extension, the unit will skip to the next valid track automatically.
Digital recordings with this unit cannot be done while playing back MP3 discs.
Notes on display indications during playback
Up to 8 characters are displayed for the name of an album or track.
Characters other than uppercase letters (“A” to “Z”), numerals (“0” to “9”) and underscore (“_”) may not be
displayed, or may be displayed in different characters.
The elapsed playing time may not be displayed correctly for MP3 tracks.
Depending on the condition of the recording equipment or the CD-R/RW disc itself, a false album or track which
cannot by played on the unit may be displayed on a TV screen.
Notes on creating MP3 discs
When converting audio data to MP3, create MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate
of 128 Kbps.
When creating MP3 discs, do not store more than 900 albums and/or tracks in a disc.
To play tracks in the order they were recorded, ensure your encoding software is set up to auto arrange by name,
or use only one album (if they are already alphabetized) or place a three digit number in front of each track to set
an order manually.
Recommended = 001-Song.mp3, 002-Song.mp3, 003-Song.mp3…
Not Recommended = 1-Song.mp3, 5-Song.mp3, 10-Song.mp3…
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Mp3 functions and operations cont
MP3 Glossary
File Extension - A 3-character string added to a file name under the Windows or DOS environment is called a “file
extension”. A file extension is used mainly to identify types of files. The file extension for MP3 files is “.mp3”.
ISO 9660 - ISO stands for the “International Organization for Standardization”. ISO 9660 determines the file structure
for CD-ROMs. This unit can play MP3 files recorded in the format compliant with ISO 9660.
Nesting of folders (albums) - To organize all your data files stored in a PC, you can store related files in a folder. A
folder can contain other folders as well as files. For example, FOLDER A can contain FOLDER B (as well as files) and
FOLDER B can contain FOLDER C (as well as other files).
Session - A session is one uninterrupted section of written data on a disc. A multi-session disc is a disc that has more
than two sessions.
MP3 Playback
To load an MP3 disc:
The disc will automatically load and display the MP3 window. It may take up to 20 seconds for an MP3 disc to be read
depending on the complexity of the file structure.
To start playback of a disc:
Select the MP3 title that you want to begin playback with. If you have folders on the disc, you may need to navigate
through them to find the desired MP3 title.
Press PLAY.
You can cancel a program by pressing the STOP button twice or turning the unit on or off.
This function does not work unless you turn PBC on.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Karaoke functions and operations
Notes on Karaoke Media
There are various types of Karaoke media available for playback with the GIG MAN PLUS. You can perform Karaoke with
MP3, CDG and VCD formats. The thing to remember is how each type differs as far as audio channels and video sup-
port.
CDG
CDG has been the most commonly used format of Karaoke media for the last 7 years. It is very similar to a standard
CD, except it has video graphics that are decoded by your Karaoke player and displayed onscreen. In addition, many
CDG’s are specially ‘multiplex’ formatted with background music on the left channel and vocals on the right channel, so
vocal cancellation can be done by simply adjusting the balance control.
VCD
While the VCD format is not as popular in North America as it is in other countries, it remains an excellent format to
be used for Karaoke. Because video is not limited to 16 colors (as with CDG), VCD’s tend to have motion video behind
the lyrics instead of a monotone screen, making them a bit more attractive to party atmospheres. Most VCD’s also
have multiplexed coded audio for easy vocal cancellation.
Adjusting the Echo Level
Digital echo provides a very spacious feeling to the vocals. You can adjust the ECHO effect to sound several ways.
1. First off, you can adjust the overall ECHO applied to the Mic channels via the ECHO VOLUME control. This limits the
echo to all three channels together.
2. After the ECHO level is set, you can start customizing the nature of the echo effect via the REPEAT and DELAY
controls. The REPEAT control adjusts the number of times the echo will repeat prior to fading out. The DELAY
control adjusts the interval time between each echo. For example, a minimal REPEAT and maximum DELAY
configuration would result in one echo repetition that occurred seconds after the source sound. A
maximum REPEAT and minimum DELAY configuration would result in several echo repetitions occurring extremely
close together, at times sounding slightly overlapped.
3. Start some background music and finalize the settings to achieve the “perfect” echo effect.
Using Digital Control
Digital Key Controllers are designed to transpose the natural key of source music up or down, so that singers can
perform songs that are normally out of their vocal range. You can use the Digital Key Controller to obtain the desired
musical key within 1.5 octaves up or down from the original key.
1. To step up, press the left button marked “b”.
2. To step down, press the right button marked “#”.
3. To revert back to the original key, press the RESET button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing CD’s
Viewing VCD’s
There are two types of VCD’s:
VCD 1/1.1 Format
This format of VCD has no menu, track search and other video features available, as this format does not support PBC.
The same as with audio CD’s, these discs will auto-play with full motion-picture audio and video, but with no support for
menus and custom track selection
VCD 2.0 Format
2.0 formatted VCD’s are equipped with PBC support. PBC (playback control) allows for user-interaction with system
menus, search functions and other video-based operations. Moreover, high-resolution still pictures (JPG/JPEG) can be
displayed if they are embedded in a VCD track/scene
Playing VCD’s
To LOAD a VCD disc:
1. Refer to “Basic and Advanced Operation” section for instructions
Track/Scene Searching
To SEARCH through a track/scene:
1. Press the 78 buttons on the remote control or front panel. Each time you press the 7 or 8 button, the search
speed increases
2. To fast forward a disc press 8
3. To fast reverse a disc press 7
4. To return to normal playback, press the PLAY button
Scene/Track Selection
To SKIP to the next chapter or track:
1. Press : during playback. The disc position advances one chapter or track each time the button is pressed
To RETURN to the previous chapter or track:
1. Press : twice in rapid succession to return to the beginning of the previous chapter or track.
NOTE: When using these features with a VCD1.1 disc with PBC on, you may be returned to the main menu.
To skip to the desired track directly using the number buttons:
1. During playback or in stop mode, enter the desired track number using the number buttons on the remote control.
For example, to play track 3, press 3 and then ENTER.
NOTE: For numbers above 10, use the +10 key. For example, for track 22, press +10 twice and 2, then ENTER
Step Mode
To ENTER STEP MODE during playback:
1. Press the STEP button. Each press, the program advances one frame. There is no audio during STEP playback.
To RETURN to normal playback:
1. Press PLAY
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing CD’s cont
Slow Playback
To enter SLOW MODE during playback:
1. Press SLOW. Each time SLOW is pressed, the play speed changes
NOTE: There is no audio during SLOW playback.
To return to normal playback:
1. Press PLAY
Viewing a Photo-CD
To LOAD a PHOTO-CD:
1. Insert a PHOTO-CD to either automatically start a slideshow or display the Photo-CD selection window
To view PHOTO-CD images on-screen:
1. Select a viewing MODE on the bottom of the menu using the remote control.
2. Select a PHOTO from the menu (may be in a folder) to begin viewing.
3. Press PLAY
4. Press the PAUSE button to PAUSE on an image. You can use the 9 or : buttons to
maneuver through the Photo’s in PAUSE mode
5. Press STOP to cancel viewing the Photo-CD
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The input selector is not set to the channel
that the active source player is connected
to.
No audio output.
Check the source player input channel and
ensure the input selector is set to that channel.
The speaker selector is not set correctly.
If external speakers are connected, set the
speaker selector to EXT. If no external
speakers are connected, select INT.
Faulty connection within external
Checks overall cabling and viability of external
equipment.
components or external component failure.
Unable to connect the GIG MAN
PLUS to my television monitor with the
RCA cable provided.
The power cord to the GIG MAN PLUS is
not plugged in.
Plug the power cord from the GIG MAN PLUS
to a wall outlet.
Your TV does not have RCA style A/V input
jacks.
Use an external RF Modulator.
An open microphone or guitar is too close to
the output speakers.
There is a loud "squealing" noise
coming from the speakers.
Increase space between microphone and
speakers.
Microphone or guitar volume is too high.
Excessive treble is applied.
Turn down microphone or guitar volume.
Lower the treble levels.
The MP3/Photo-CD either has files that are
not standard-formatted, or the disc was not
standard-copied.
An MP3 or Photo-CD does not play in
the GIG MAN PLUS.
Try other MP3/JPEG encoding software or disc
writing software for writing the discs.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
R
THE SINGER'S ULTIMATE CHOTIMCE
C
Vocopro 2005
V 1.0
WWW.VOCOPRO.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
|