VocoPro DVD Player DVG 777K User Manual

THE SINGER'S ULTIMATE CHOICE

DVG-777K

Multi-Format USB/DVD/CD+G Karaoke Player

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety instructions

8. Ventilation - The appliance should be situated so its

location does not interfere with its proper ventilation. For

example, the appliance should not be situated on a bed,

sofa, rug, or similar surface that may block the

ventilation slots.

CAUTION

RISK OF SHOCK

9. Heat - The appliance should be situated away from

heat sources such as radiators, heat registers,

stoves, or other appliances (including amplifiers)

that produce heat.

CAUTION: To reduce the risk of electric shock,

do not remove cover (or back). No

user-serviceable parts inside. Only refer

servicing to qualified service personnel.

10. Power Sources - The appliance should be

connected to a power supply only of the type described

in the operating instructions or as marked on the

appliance.

Explanation of Graphical Symbols

The lightning flash & arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of danger.

11. Grounding or Polarization - Precautions should be

taken so that the grounding or polarization means of

an appliance is not defeated.

12. Power-Cord Protection - Power-supply cords

should be routed so that they are not likely to be walked

on or pinched by items placed upon or against them,

paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit

from the appliance.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and servicing instructions.

13. Cleaning - Unplug this unit from the wall outlet

before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

WARNING

To reduce the risk of fire or electric shock, do

not expose this unit to rain or moisture.

14. Power lines - An outdoor antenna should be

located away from power lines.

1. Read Instructions - All the safety and operating

instructions should be read before the appliance is

operated.

15. Nonuse Periods - The power cord of the appliance

should be unplugged from the outlet when left unused

for a long period of time.

2. Retain Instructions - The safety and operating

instructions should be retained for future reference.

16. Object and Liquid Entry - Care should be taken so

that objects do not fall and liquids are not spilled into the

enclosure through openings.

3. Heed Warnings - All warnings on the appliance and in

the operating instructions should be adhered to.

17. Damage Requiring Service - The appliance should

be serviced by qualified service personnel when:

4. Follow Instructions - All operating and use

instructions should be followed.

A. The power supply cord or plug has been damaged; or

B. Objects have fallen into the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally

or exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure

damaged.

5. Attachments - Do not use attachments not

recommended by the product manufacturer as they may

cause hazards.

6. Water and Moisture - Do not use this unit near water.

For example, near a bathtub or in a wet basement and

the like.

18. Servicing - The user should not attempt to service

the appliance beyond that described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

7. Carts and Stands - The appliance should be used

only with a cart or stand that is recommended by the

manufacturer.

Note:

7 A. An appliance and cart combination

should be moved with care. Quick stops,

excessive force, and uneven surfaces may

cause an overturn.

To CATV system installer's (U.S.A.): This reminder is

provided to call the CATV system installer's attention to

Article 820-40 of the NEC that provides guidelines for

proper grounding and, in particular, specifies that the

cable ground shall be connected as close to the point of

cable entry as practical.

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC information (U.S.A.)

CAUTION:

READ THIS BEFORE OPERATING YOUR UNIT

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!: This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Vocopro may void your authority, granted by the FCC, to

use this product.

1. To ensure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2. Install your unit in a cool, dry, clean place - away from

windows, heat sources, and too much vibration, dust,

moisture or cold. Avoid sources of hum (transformers, v

motors). To prevent fire or electrical shock, do not expose

to rain and water.

2. IMPORTANT: When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable(s) supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your

FCC authorization to use this product in the U.S.A.

3. Do not operate the unit upside-down.

3. NOTE: This product has been tested and found to

comply with the requirements listed in FCC Regulations,

Part 15 for Class "B" digital devices. Compliance with

these requirements provides a reasonable level of

assurances that your use of this product in a residential

environment will not result in harmful interference with

other electronic devices. This equipment

4. Never open the cabinet. If a foreign object drops into

the set, contact your dealer.

5. Place the unit in a location with adequate air

circulation. Do not interfere with its proper ventilation; this

will cause the internal temperature to rise and may result

in a failure.

generates/uses radio frequencies and, if not installed

and used according to the instructions found in the

owner's manual, may cause interference harmful to the

operation of other electronic devices. Compliance with

FCC regulations does not guarantee that interference

will not occur in all installations. If this product is found

to be the source of interference, which can be

determined by turning the unit "Off" and "On", please try

to eliminate the problem by using one of the following

measures:

6. Do not use force on switches, knobs or cords. When

moving the unit, first turn the unit off. Then gently

disconnect the power plug and the cords connecting to

other equipment. Never pull the cord itself.

7. Do not attempt to clean the unit with chemical solvents:

this might damage the finish. Use a clean, dry cloth.

8. Be sure to read the "Troubleshooting" section on

common operating errors before concluding that your unit

is faulty.

Relocate either this product or the device that is being

affected by the interference.

9. This unit consumes a fair amount of power even when

the power switch is turned off. We recommend that you

unplug the power cord from the wall outlet if the unit is not

going to be used for a long time. This will save electricity

and help prevent fire hazards. To disconnect the cord, pull

it out by grasping the plug. Never pull the cord itself.

Use power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter(s).

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300-ohm ribbon

lead, change the lead-in to coaxial type cable.

10. To prevent lightning damage, pull out the power cord

and remove the antenna cable during an electrical storm.

If these corrective measures do not produce satisfactory

results, please contact your local retailer authorized to

distribute Vocopro products. If you can not locate the

appropriate retailer, please contact Vocopro, 1728

Curtiss Court, La Verne, CA 91750.

11. The general digital signals may interfere with other

equipment such as tuners or receivers. Move the system

farther away from such equipment if interference is

observed.

NOTE:

Please check the copyright laws in your country

before recording from records, compact discs,

radio, etc. Recording of copyrighted material may

infringe copyright laws.

CAUTION

The apparatus is not disconnected from the AC power

source so long as it is connected to the wall outlet,

even if the apparatus itself is turned off. To fully insure

that the apparatus is indeed fully void if residual power,

leave unit disconnected from the AC outlet for at least

fifteen seconds.

Voltage Selector (General Model Only)

Be sure to position the voltage selector to match the

voltage of your local power lines before installing the

unit.

110V

Download from Www.Somanuals.com. All Manuals Search And Download.

Welcome

And Thank you for purchasing the DVG-777K from VocoPro, your ultimate choice in

Karaoke entertainment! With years of experience in the music entertainment business,

VocoPro is a leading manufacturer of Karaoke equipment, and has been providing

patrons of bars, churches, schools, clubs and individual consumers the opportunity to

sound like a star with full-scale club models, in-home systems and mobile units. All our

products offer solid performance and sound reliability, and to reinforce our commitment

to customer satisfaction, we have customer service and technical support professionals

ready to assist you with your needs. We have provided some contact information for

you below.

VocoPro

1728 Curtiss Court

La Verne, CA 91750

Toll Free: 800-678-5348

TEL: 909-593-8893

FAX: 909-593-8890

VocoPro Company Email Directory

Customer Service & General Information

[email protected]

Tech Support

[email protected]

Remember Our Website

Be sure to visit the VocoPro website www.vocopro.com for the latest information on

new products, packages and promos. And while you're there don't forget to check out

our Club VocoPro for Karaoke news and events, chat rooms, club directories and even

a KJ Service directory!

We look forward to hearing you sound like a PRO, with VocoPro, your ultimate choice in

Karaoke entertainment.

FOR YOUR RECORDS

Please record the model number and serial number below, for easy reference, in case of loss or theft. These

numbers are located on the rear panel of the unit. Space is also provided for other relevant information

Model Number

Serial Number

Date of Purchase

Place of Purchase

Download from Www.Somanuals.com. All Manuals Search And Download.

Features and Speciﬁcations

Features

• Multi-format disc player reads DVD, CD, CD+G, Mp3, Mp4, HDCD and VCD

• USB, SD and MiniSD card playback

• Hard drive playback supports FAT/FAT 32 format

• Single Mode automatically stops playback after a track has ﬁnished playing

• 2 microphone ¼” input channels with individual volume controls

• Cue function

• 5.1 channel digital surround sound

• Direct Track Access

• Digital Echo gives vocals that hard-to-ﬁnd professional sound

• Full-function remote control

• PAL/NTSC compatible for worldwide use

• LED Display window

• Audio Outputs: 5.1 Channel surround sound RCA, L/R Stereo RCA (music only), 2 L/R Karaoke RCA

(music and microphone), Digital Coaxial (music only), Optical (music only)

• Video Ouputs: RCA video, Component RGB, VGA, SCART

Speciﬁcations

Power requirements................................................ 100V/240V AC, 50/60Hz

Power consumption ................................................ 25W

Disc compatibility.................................................... DVD, Mp4, VCD 1.0-3.0, Mp3, SVCD, CD+G,

CD, JPEG, CD-R/RW*, DVD+R/-R/RW*

Disc size requirements ............................................ Diameter: 120mm/80mm

Video format.......................................................... NTSC, PAL, Multi System, 480P, 576P, 720P

Video output type.................................................... Video, S-Video, VGA, SCART, YUV, YPbPr

Video output level.................................................... CVBS: 1Vp-p 75Ω

USB jack ............................................................... USB1.1

Remote distance .................................................... 22 feet maximum**, 30º angle

Audio output format ................................................ Stereo, 5.1CH, optical, and coaxial

DVD frequency response.......................................... 20-20kHz

DVD S/N ratio....................................................... 80dB

DVD harmonic distortion.......................................... 0.3%

Karaoke frequency response .................................... 20-20kHz

Karaoke S/N ratio.................................................. 70dB

Echo level .............................................................. 10 levels

Total harmonic distortion ......................................... 0.5%

*Some burned CDs and DVDs may not play properly on the DVG-777K. If this is the case, try using a

different brand of disc or a differnt disc-burning program.

**Actual maximum distance may vary

Download from Www.Somanuals.com. All Manuals Search And Download.

Package Contents

When unpacking your DVG-777K we recommend that you keep the original receipt or invoice, box and

packing materials in case the product ever needs to be shipped for warranty repair or any other purpose.

Warranty Information

The DVG-777K is covered under a 1-Year Limited Warranty. For detailed warranty information please visit

www.vocopro.com/warranty_standard.html

Extended Limited Warranty

Extended Warranties are also available and can be purchased directly from VocoPro. Visit

www.vocopro.com/warranty_extended.html

for information and purchasing of our Silver and Gold Extended Limited Warranties.

Service Centers

For a list of U.S. and International Authorized VocoPro Service Centers visit

www.vocopro.com/frm_service.html

Package Contents

Before using the DVG-777K make sure the following accessories are included:

• 1 DVG-777K Multi-Format USB/DVD/CD+G karaoke Player

• 1 Remote Control

• 1 AC Power Cord

• 1 A/V RCA cable (red, white and yellow)

• 2 Rack ears

• 1 Warranty Card

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Connected

Audio Connections

Music and Microphone Vocals through the Karaoke Mixed Outputs

��

The two Karaoke Mixed Output channels allow you to

�

��

�

��

�

��

connect vocals and music to up to two separate audio

input devices (mixer, amp, power speaker, recording

device, etc.).

� � � ��

��

What you will need:

• 2 RCA L/R (red & white) audio cable

• Up to 2 audio input devices (mixer, amp, power

speaker, recording device, etc.)

��

1. Connect one end of the L/R RCA audio cable to one

of the L and R (red & white) RCA Karaoke Mixed

Output channels on the DVG-777K’s rear panel

2. Connect the other end of the L/R RCA audio cable to

the L/R RCA audio inputs on an audio input device

3. To connect to a second device, follow steps 1 and

2 above, except now using the other Karaoke Mixed

Output channel on the DVG-777K’s rear panel

AV OUT

AV INPUT

STEREO INPUT

��

PHONO 2

PHONO 1

AUDIO

AV3

AV2

AV1

PHONO 3

CD 3

CD 2

CD 1

LINE

remote

PHONO

Digital Audio (Disc audio only, no microphone vocals)

NOTE: Microphone vocals are analog therefore are not present in the digital signal.

Connecting to a 5.1 Surround Sound Receiver (Music only, no microphone vocals)

What you will need:

• 6 RCA-style digital surround sound cables

• A 5.1 digital surround sound receiver or ampliﬁer

��

1. Connect an end of each RCA cable to the FL, FR, CEN, SL,

SR, and SW outputs on the rear panel of the DVG-777K

2. Connect the other end of each RCA cable to the FL, FR,

CEN, SL, SR, and SW inputs on a 5.1 CH. Surround Sound

receiver or ampliﬁer.

NOTE: The actual inputs may be labeled differently on certain

receivers and ampliﬁers.

• FL - Front Left

• FR - Front Right

• CEN - Center

• SL - Side Left

• SR - Side Right

• SW - Subwoofer

��

NOTE: When using the 5.1 surround sound outputs, make

sure the DVG-777K is set to 5.1. Press the 5.1 CH button

on the remote control to turn on 5.1 mode.

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Connected

Connecting Directly to a Powered Subwoofer

The DVG-777K can be connected directly to a powered subwoofer with

an RCA input.

��

What you will need:

• 1 RCA L/R (red & white) audio cable

• A powered subwoofer with an RCA audio input

��

1. Connect one end of the RCA cable to the SW output on the rear

panel of the DVG-777K

2. Connect the other end of the RCA cable to the RCA input on the

powered subwoofer

��

Stereo RCA

Use the ML and MR outputs for connecting audio from the

disc player (DVD, CD, VCD, etc) to a stereo input device.

What you will need:

• 1 RCA L/R (red & white) audio cable

• 1 audio input device (mixer, amp, power speaker, recording

device, etc.)

��

1. Connect one end of the L/R RCA audio cable to the ML and

MR RCA jacks on the DVG-777K’s rear panel.

�

2. Connect the other end of the L/R RCA audio cable to the

L/R RCA audio inputs on an audio input device.

�

��

Optical

Use the Optical output for connecting digital audio to a device with

an optical input.

��

What you will need:

• 1 Digital Optical cable

• An audio input device with a Digital Optical audio input jack such

as a digital receiver or mixer

1. Connect one end of the Optical cable to the OPTICAL output jack

on the rear panel of the DVG-777K

��

2. Connect the other end of the Optical cable to an Optical input

jack on a receiver, mixer, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Connected

Coaxial

��

Use the Coaxial output for connecting digital audio to a device with a coaxial

input.

What you will need:

• 1 Digital Coaxial cable**

• An audio input device with a Digital Coaxial audio input jack such as a digital

receiver or mixer

��

1. Connect one end of the Coaxial cable to the COAXIAL output jack on the

rear panel of the DVG-777K

2. Connect the other end of the Coaxial cable to a Coaxial input jack on a

receiver, mixer, etc.

** Although it is alright to use standard RCA cables, it is recommended that you use Digital RCA audio

cables for optimum digital signal quality.

Video Connections

Connecting Video Using the RCA Video Output

What you will need:

• 1 RCA video cable (usually labeled yellow)

• A TV, video monitor or video mixer with an RCA video input

��

1. Connect one end of the RCA video cable to the yellow RCA VIDEO output

on the rear panel of the DVG-777K

2. Connect the other end of the RCA video cable to an RCA video input jack

on a TV, monitor or video mixer

��

S-Video

What you will need:

• 1 S-Video Cable

• A TV, video monitor or video mixer with an S-Video input

��

1. Connect one end of the S-Video cable to the S-Video output on the rear

panel of the DVG-777K

2. Connect the other end of the S-Video cable to an S-Video input jack on a

TV, monitor or video mixer

��

NOTE: When using the S-Video output, the DVG-777K must be set to

S-VIDEO output. See “Changing the Video Output Mode” in the Operations

section of this manual for detailed instructions on setting the DVG-777K to

S-VIDEO Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Connected

RGB/Component Video HD Outputs

What you will need:

• 1 RGB cable

��

• A High-Deﬁnition TV with RGB or Component (Y, Pb, Pr) video inputs

1. Connect one end of the RGB/Y,Pb,Pr cable to the Y/R, Pb/G, Pr/B

jacks on the DVG-777K’s rear panel

2. Connect the other end of the RGB/Y,Pb,Pr cable to the RGB or Y, Pb, Pr

inputs on a High Deﬁnition TV

��

NOTE: When using the Component output, the DVG-777K must be set to

YPBPR output. See “Changing the Video Output Mode” in the Operations

section of this manual for detailed instructions on setting the DVG-777K to

YPBPR Mode.

VGA output

What you will need:

• 1 VGA Cable

• A TV or video monitor with a VGA input

��

1. Connect one end of the S-Video cable to the S-Video output on the rear

panel of the DVG-777K

2. Connect the other end of the S-Video cable to an S-Video input jack on a

TV or monitor

��

NOTE: When using the VGA output, the DVG-777K must be set to VGA

output. See “Changing the Video Output Mode” in the Operations section

of this manual for detailed instructions on setting the DVG-777K to VGA

Mode.

SCART

What you will need:

• 1 SCART cable

• A TV or video monitor with a SCART input

��

1. Connect one end of the SCART cable to the SCART output on the rear

panel of the DVG-777K

2. Connect the other end of the SCART cable to a SCART input jack on a TV

or monitor

��

NOTE: When using the SCART output, the DVG-777K must be set to SCART

output. See “Changing the Video Output Mode” in the Operations section

of this manual for detailed instructions on setting the DVG-777K to SCART

Mode.

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Connected

Connecting a USB Device

The DVG-777K allows you to connect a USB device and play A/V

ﬁles using the remote control. Make sure Smart Navi is turned on

in the Preferences section of the Setup Menu. If Smart Navi is off,

no menu will appear on the screen. See the Setup Menu section in

this manual for detailed instructions on turning on Smart Navi.

��

1. Connect the USB device to the USB port on the front panel

2. Press the USB/DISC button on the remote control, the input

selection window will appear

3. Use the arrow buttons to highlight USB DEV (USB device) and

press ENTER to access the USB device. The ﬁle menu will

appear.

��

4. Use the remote control to navigate through the A/V ﬁles for

playback

DVD DRIVE

USB DEV

Connecting an SD CARD or MINI SD CARD

The DVG-777K allows you to connect an SD CARD or MINI SD CARD to play A/V ﬁles using the remote control.

Make sure Smart Navi is turned on in the Preferences section of the Setup Menu. If Smart Navi is off, no menu

will appear on the screen. See the Setup Menu section in this manual for detailed instructions on turning on

Smart Navi.

1. Insert the SD CARD or MINI SD CARD into the correct slot on the front panel. The ﬁle menu will appear

2. Use the remote control to navigate through the A/V ﬁles for playback

��

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operations

Turning on the Power

Main Power

The main power button for the DVG-777K is located on the front panel.

1. Press the POWER button on the front panel to turn the DVG-777K on and off

Standby

Once the main power is turned on, the DVG-777K can be set to standby mode using the STANDBY button on

the remote control.

1. Press the STANDBY button on the remote control while the player is on to set the player to standby mode

2. Press the STANDBY button again to turn the player back on

Inserting a Disc

1. Press the

button on the front panel or remote control to open the disc tray

2. Insert the disc label-side-up

3. Press the

button on the front panel or remote control a second time to close the disc tray

Playing a Disc

1. Insert a disc into the disc tray

2. Press the PLAY/PAUSE

button on the front panel or the

button on the remote control to begin playing

Stopping a Disc

1. Press the STOP button on the front panel or the

playing

button on the remote control to stop a disc while it is

Pausing a Disc

1. While a disc is playing press the PLAY/PAUSE

control to pause the disc

button on the front panel or the button on the remote

2. Press the pause or play button again to resume playback

Muting a Disc

1. Press the MUTE button on the remote control to silence the disc

2. Press the MUTE button again to un-mute the disc

Skipping Tracks

1. Use the PREV/NEXT buttons on the front panel or the

to skip from one track to another

2. The NEXT

track

button skips forwards to the next track and the PREV

button skips back to the previous

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operations

Scanning through Tracks

1. Use the

2. The

buttons on the remote control to scan through tracks

button scans forwards through the current track and the

backwards through the current track

Adjusting the Disc Music Volume

1. Use the VOL + and VOL - buttons on the remote control to adjust the volume

2. The VOL + button raises the volume and the VOL -- button lowers it

Using Direct Track Access

The Direct Track Access buttons are the number buttons on the front panel and remote control. These allow

you to jump directly to a track or chapter (DVD) by entering its number.

example

To jump directly to track 9:

1. Press the 9 button

2. Press PLAY

3. Track 9 will begin playing

Jumping to a Speciﬁc Time on a Disc (CD, VCD and DVD only)

1. Press the SEARCH button on the remote control

2. Enter the time on the disc that you want to jump to

3. Press ENTER

4. The disc will play at that time

example

To jump directly to 1:45

1. Press SEARCH on the remote control

2. Press 0, 1, 4, then 5

3. Press ENTER on the remote control

4. The disc will begin playing at 1:45 minutes in the disc

Programming a Custom Track Order

The DVG-777K allows you to create a custom playlist of up to 50 tracks using the PROGRAM button on the

remote control.

1. Press the PROGRAM button on the remote control to access the Program menu. The Program menu will

appear on the TV screen

2. Enter a track number using the number buttons on the remote control

3. Press ENTER on the remote control to enter that track into the playlist and to jump to the next playlist slot

4. Continue this until your playlist is complete

example

To create a playlist in the following order:

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operations

1. Track 14

2. Track 7

3. Track 3

4. Track 1

1. Press the PROGRAM button to enter Program mode

2. Press 14 and then ENTER

3. Press 7 and then ENTER

4. Press 3 and then ENTER

5. Press 1 and then ENTER

6. Press PLAY to begin playing in this order

7. Press STOP twice to exit the programmed playlist

Clearing a track in Program Mode

Press the CLEAR button on the remote control to erase the last programmed track.

Using Digital Key Control

Digital Key Control allows you to change the musical key of disc music to ﬁt any singer’s vocal range. The Digital

Key Control buttons are located on the remote control and front panel

b - Lowers the musical key

(remote control only) - Resets the musical key back to the original or natural key

# - Raises the musical key

NOTE: Karaoke mode must be on in order to use Digital Key Control

Turning Karaoke Mode On and Off

Press the KARAOKE button on the remote control to turn Karaoke Mode on and off.

Setting Repeat Options

Press the REPEAT button on the remote control to cycle through the available Repeat options

• REP-ONE: Repeats the same song continuously

• REP-ALL: Repeats the entire disc after it has played through

• REPEAT OFF: All Repeat options are off

• CHAPTER REPEAT (DVD only): Repeats the current chapter on a DVD disc

• TITLE REPEAT (DVD only): Repeats the current title on a DVD disc

Switching Between PAL and NTSC Video Modes

The DVG-777K is defaulted to NTSC. Use the P/N button on the remote control to switch between PAL and

NTSC.

1. Press the P/N button on the remote control

2. Press ENTER on the remote control. The video mode will change

PAL: Europe and Asia

NTSC: North America

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operations

Changing the Video Output Mode

The DVG-777K has different video output channels: S-Video, SCART, VGA, Component, Etc. The DVG-777K

must be set to the correct video output mode when using these output channels.

To cycle through the different video output modes:

1. Press the VIDEO button on the remote control

2. Press the ENTER button on the remote control to change to the next video mode

3. Follow steps 1 & 2 to cycle through all of the video output modes until you ﬁnd the correct one for your setup

Looping a Section of Disc using the A--B Button

1. Press the A--B button on the remote control to set the starting point of the loop

2. Press the A--B button again to set the ending point of the loop and to begin the loop

3. Press the A--B button a third time to cancel the loop and resume normal playback

Setting Single Mode*

Single Mode will stop playback after a single song is ﬁnished playing.

1. Make sure Cue is turned off

2. Press the SINGLE MODE button on the remote control to turn Single Mode on and off

Setting the Cue function*

The Cue function will pause a disc at the 5 second mark. This is for use on CD+G karaoke discs with a song-title

screen at the beginning of each song as it allows you to display the song-title for the audience before playing the

song.

1. Make sure Single Mode is turned off

2. Press the CUE button on the remote control to turn Cue on. Each song will pause at the 5 second mark

3. Press PLAY to begin playing each song

*Single Mode and Cue cannot be turned on at the same time. Make sure the one you are not using is

turned off before using the other one.

Using the Digital Equalizer (EQ)

The DVG-777K has seven preset equalizer settings plus one user-programmable one.

1. Press the EQ button on the remote control to open the EQ menu

2. Press the ENTER button on the remote to cycle through the available EQ settings: Standard, Classic, Jazz,

Rock, Pops, Ballad, Dance and Personal.

3. Press the EQ button two more times until EQUALIZER ON appears on the TV screen

Customizing the EQ in Personal EQ mode

1. Follow the above instructions until PERSONAL is selected

2. Use the left and right arrow buttons on the remote control to select a band for adjusting

3. Use the up and down arrow buttons on the remote control to raise and lower the value on each band

4. Press the EQ button two more times until EQUALIZER ON appears on the TV screen

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operations

Playing One Frame at a Time with the Step Function

The Step function allows you to view one frame at a time on DVDs and VCDs.

NOTE: The Step function does not work on CD+Gs

1. Press the STEP button to enter Step mode and pause the current frame

2. Press it again to jump to the next frame

3. Press PLAY to resume normal playback

Playing Forwards and Reverse in Slow Motion

You can play a disc forwards or reverse at 1/2, 1/4 and 1/8 the normal speed

1. Press the SLOW button on the remote control to cycle through the Slow Motion options

2. Press the PLAY button to return to normal playback

Slow Motion options:

• SF 1/2X - Forwards at 1/2 the normal speed

• SF 1/4X - Forwards at 1/4 the normal speed

• SF 1/8X - Forwards at 1/8 the normal speed

• SF 1/2X - Reverse at 1/2 the normal speed

• SF 1/4X - Reverse at 1/4 the normal speed

• SF 1/8X - Reverse at 1/8 the normal speed

Turning on Random Mode

In Random Mode, the DVG-777K will play the tracks on a disc in random order

1. Press the RANDOM button on the remote control to turn Random Mode on and off.

NOTE: Random Mode does not work on DVD discs.

DVD Operations

Accessing the DVD Menu

Use the MENU button on the remote control to access the main menu on a DVD. Use the arrow buttons on

the remote control to navigate through the main menu and the ENTER button to make selections.

Accessing the Title Screen

Each section on a DVD such as the movie, special features, etc. has its own title screen. Use the TITLE button

on the remote control to access the title screen for the current section.

Turning on Subtitles

Use the SUBTITLE button on the remote control to cycle through the available subtitle languages on a DVD.

NOTE: The available subtitles vary from each DVD and some may not have any at all.

Download from Www.Somanuals.com. All Manuals Search And Download.

General Operations

Changing the Angle View

Use the ANGLE button on the remote control to view multiple angles on a DVD with multiple angles available.

NOTE: Not all discs have multiple angles available.

Accessing Additional Dubbed Languages

Some DVDs have multiple languages dubbed over the original language for speakers of other languages. Use

the AUDIO button on the remote control to cycle through these languages on DVDs with multiple languages

available.

Mp3 and AVI ﬁle Operations

When playing a disc, USB device, SD CARD or MINI SD CARD with Mp3 or AVI ﬁles in it, the Smart Navi menu

will come up. Use the arrow buttons to navigate through this menu and the ENTER or PLAY button on the

remote control to make selections.

If the Smart Navi menu does not appear it may need to be turned on.

Turning on the Smart Navi Menu:

1. Press SETUP on the remote control

2. Use the down arrow button to highlight PREFERENCES. Press ENTER on the remote control

3. Use the down arrow button to highlight SMART NAVI. Press ENTER on the remote control. Make sure WITH

MENU is shaded

4. If WITH MENU is not shaded, press the left arrow and then the down arrow so that WITH MENU is

highlighted and press the ENTER button

Repeat Options

When in the Smart Navi menu press the REPEAT button on the remote control to cycle through the available

repeat options:

• FOLDER: Plays the current folder through without repeating

• FOLDER REPEAT: Repeats the entire folder

• REP-ONE: Repeats the current song

SMART NAVI

ROOT

KARAOKE

FONT

PLAY MODE

FOLDER

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

�

��

�

��

�

��

1. Main POWER button - Turns the power on and off.

2. SD CARD slot - Insert an SD CARD here for A/V ﬁle playback.

3. Display screen - Displays the player’s operating status.

4. Direct Track Access (number) buttons - For use whenever number input is necessary. i.e. Jumping directly

to tracks/chapters, programming tracks in program mode, parental password, etc. See the Operations

section in this manual for detailed instructions.

5. EJECT

button - Opens and closes the disc tray

6. PLAY/PAUSE

button - Plays a disc that is stopped or paused and pauses a disc that is playing.

buttons - Press PREV to jump to the previous track and NEXT to jump to the next

button - Toggles between disc player and USB input. Select DISC when playing a disc and

7. Stop

button - Stops a disc that is playing.

8. PREV and NEXT

track.

9. USB/DISC

USB when connecting a USB device to the player.

10. Digital Key Control - Adjusts the musical key to ﬁt a singer’s vocal range. Press “b” to lower the key and

“#” to raise the key.

11. CUE button

- Turns the Cue function on and off. When the Cue function is on, the player will pause at

5 seconds into every track.This is for use on CD+G karaoke discs with a song title screen at the beginning of

each song as it allows you to display the song-title for the audience before playing the song.

12. SINGLE MODE

button - Turns Single Mode on and off. Single mode will play a single track and then

stop playing when that track is ﬁnished.

13. USB input - Connect a USB device here for A/V ﬁle playback.

14. MINI SD CARD slot - Insert a MINI SD CARD here for A/V ﬁle playback.

15. Disc Tray - Insert discs here.

16. MIC 1 & 2 Input jacks - Connect microphones here using ¼” microphone cables.

17. MIC 1 & 2 Volume controls - For adjusting each microphone’s individual volume. Turn clockwise to raise

the microphone volume and counter-clockwise to lower it.

18. ECHO level control - For adjusting the amount of Echo that is present in the microphone vocals. Turn

clockwise to raise the Echo level and counter-clockwise to lower it.

* The Cue function and Single Mode cannot be turned on at the same time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

�

� ��

1. 5.1 Digital Surround Sound Output jacks - For connecting to a 5.1 CH. surround sound system. FL -Front

Left, FR - Front Right, SW - Subwoofer, SL -Side Left, SR - Side Right, CEN -Center.

2. RGB/Component (Y,Pb,Pr) Video output - Connect video to a TV with RGB or Component video inputs using

RGB videocables.

3. Video Output jack (RCA) - Connect to a TV/Video monitor using an RCA video cable.

4. Karaoke Mixed Output jacks (mic and music) - Connect to a mixer, amp, or TV audio inputs using two RCA

cables to output the disc music and microphone signal together.

5. VGA output (video) - For Video output using a VGA video cable.

6. SCART - For Video output using a SCART video cable.

7. Power Input - Connect the power cord (included) here.

NOTE: Make sure the power cord is ﬁrmly connected to the Power Input before turning the player on.

8. ML and MR Output jacks (music only) - Connect to a mixer or sound system to output digital stereo.

9. Coaxial Output jack (music only) - Connect to a sound system with digital Coaxial audio input using a digital

audio cable.

NOTE: Although it is alright to use standard RCA cables, it is recommended that you use Digital RCA audio

cables for optimum digital signal.

10. S-Video Output jack - Connect to a TV/video monitor with an S-Video input jack using an S-Video video

cable.

11. Optical Output jack (audio) - Connect to a sound system with an Optical audio input using a digital audio

cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

�

1. STANDBY button - Turns Standby mode on and off.

button - Opens and closes the disc tray.

3. USB/DISC button - Toggles between disc player and USB

input. Select DISC when playing a disc and USB when

connecting a USB device to the player.

4. 5.1 CH button - Set the player 5.1 digital surround-sound

output.

5. STEREO button - Sets the player to stereo L/R output.

6. MUSIC MODE button - Use this button to choose between

5 different DSP surround sound modes. Choose the one that

sounds best in the room that you are in.

�

7. KARAOKE button - Turns Karaoke Mode on and off. Karaoke

mode must be on in order to use Digital Key Control.

8. Direct Track Access (number) buttons - For use whenever

number input is necessary. i.e. Jumping directly to tracks/

chapters, programming tracks in program mode, parental

password, etc. See the Operations section in this manual for

detailed instructions.

9. P/N button - Switches between PAL and NTSC video modes.

To change video modes press the P/N button and then

ENTER.

�

��

10. VIDEO button - Cycles through the available video output modes: VGA, S-Video, Y/Pb/Pr, Y/Cb/Cr and

SCART. To change the video output mode press the VIDEO button and then ENTER.

11. SEARCH button - Opens up the GO TO menu which allows you to jump to a certain time on DVDs, VCDs

and CDs. See the Operations section in this manual for detailed instructions on using the Search option.

12. CLEAR button - Erases numbers entered into a menu without closing the menu

13. PROGRAM button - Opens the Program Menu which lets you program a custom playlist order of up to 50

tracks. See the Operations section in this manual for detailed instructions on using the Program Menu.

��

14. TITLE button - Accesses the title screen on a DVD.

NOTE: For use on DVDs with title screens. Some DVDs may not

have a title screen.

15. MENU button - Accesses the main menu on DVDs and

other discs with main menus.

16. SETUP button - Accesses the Setup Menu. See the

Setting Up Preferences section in this manual for detailed

instructions on using the Setup Menu.

��

17. REPEAT button - Cycles through the available repeat

options. Repeat options vary depending on the type of

disc. See the Operations section in this manual for detailed

instructions on using the Repeat function.

18. SUBTITLE button - Turns on subtitles for DVDs with

subtitles available.

��

NOTE: Not all DVDs have subtitles available.

19. Arrow buttons - For navigating through on-screen menus.

20. ENTER button - For making selections in on-screen menus.

21. A-B button - For setting a section on a disc for continuous looping. See the Operations section in this

manual for detailed instructions on using the A-B loop feature.

22. PBC button - Turns on Playback Control (PBC). For use with VCD 2.0 discs, PBC allows you to navigate

more conveniently through VCD 2.0 discs.

23. ANGLE button - For viewing multiple angles on a DVD with multiple angles available.

NOTE: Not all DVDs have multiple angles available.

24. ZOOM button - For zooming in on the picture on DVDs, CD+Gs and VCDs.

25. VIEW button - For viewing speciﬁc sections on a VCD disc.

NOTE: The disc must be stopped in order to access the VCD View Menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

26. RETURN button - Accesses the main menu on a VCD 2.0 disc.

NOTE: PBC must be turned on and the VCD must be a VCD 2.0 disc.

27. AUDIO button - Cycles between the available audio

languages on DVDs with multiple languages available.

��

NOTE: Not all DVDs have multiple languages available.

28. L/R button - Cycles through the different multiplex CD+G

output modes for canceling the vocals: MONO-LEFT, MONO-

RIGHT, STEREO. See the Operations section in this manual

for detailed instructions on canceling vocals on multiplex

CD+G discs.

��

29. DISPLAY button - Cycles through available disc time info

and displays it on the TV/video monitor.

30. RANDOM button - Turns Random Mode on and off. In

Random Mode, the player randomly picks tracks from a disc

for playback.

31. RESUME button - Closes the Setup Menu.

32. EQ button - Turns the equalizer on and off and cycles

through the different equalizer options: Standard, Classic,

��

Jazz, Rock, Pops, Ballad, Dance and Personal. See the Operations section in this manual for detailed

instructions on setting up the equalizer.

33. SLOW button - Cycles through available Slow-motion Reverse and Slow-motion Forward options. See the

Operations section in this manual for using the slow-motion function.

34. STEP button - For viewing one frame at a time on video discs. See the Operations section in this manual

for detailed instructions on using the Step function.

35. MUTE button - Mutes all disc music and movie audio.

36. SINGLE MODE* button - Turns Single Mode on and off. Single mode will play a single track and then stop

playing when that track is ﬁnished.

37. CUE button* - Turns the Cue function on and off. When the Cue function is on, the player will pause at 5

seconds into every track.This is for use on CD+G karaoke discs with a song title screen at the beginning of

each song as it allows you to display the song-title for the audience before playing the song.

38. Digital Key Control - Adjusts the musical key to ﬁt a singer’s vocal range. Press “b” to lower the key and

“#” to raise the key and

(natural) key.

to return back to the original

��

39.

button - Plays a disc.

40. button - Pause the disc.

41.

- For scanning through a track.

scans

backwards and

scans forwards.

42.

43.

and

button - Stops the disc.

��

buttons - Press

to jump to the next track.

to jump to the previous track

44. VOL + & VOL -- buttons - Adjusts the master music

volume.

��

* The Cue function and Single Mode cannot be turned on at the

same time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

The Setup Menu can be accessed by pressing the SETUP button on the remote control and allows you to

change the DVG-777K’s system settings.

General Setup Page

GENERAL PAGE

PICMODE

ANGLEMARK

OSDLANG

CAPTIONS

1. PIC MODE

Set the picture mode that best ﬁts the type of video you are

using.

2. ANGLE MARK

For use when using the ANGLE feature on DVD discs with

multiple angles available.

SCREENSAVER

ON: Will display a mark on the screen when using the ANGLE

feature.

OFF: There will be no mark on the screen when using the

ANGLE feature.

MAINPAGE

GENERAL SETUP

3. OSD LANGUAGE

Select the language of the text for this System Setup (On-Screen Display) menu.

4. CAPTIONS

For use with discs that have captions available.

ON: Turns captions on, displaying them on the screen

OFF: Turns captions off.

5. SCREEN SAVER

Screen saver is used to protect your TV/video monitor when the player is idle for a signiﬁcant period of time.

ON: A screen saver will appear after the DVG-777K is idle for a period of time.

OFF: There will be no screen saver.

Speaker Setup Page

SPEAKER SETUP PAGE

NOTE: To make changes in this menu, make sure that KARAOKE

DOWNMIX

CENTER

REAR

SUBWOOFER

CENTERDELAY

REARDELAY

TESTTONE

mode is turned OFF.

1. DOWNMIX

LT/RT: Sound output is divided with the Left coming out of the

Left speaker and the Right coming out of the Right speaker.

STEREO: Sound output is in Stereo Mode.

OFF: Turns DOWNMIX off.

2. CENTER*

ON: There will be output from the Center speaker (CEN) output

jack.

LOUD SPEAKER SETUP

OFF: The CEN output is off

NOTE: DOWNMIX must be turned off to access any of the other settings in the Speaker Setup Page.

3. REAR*

ON: There will be output from the SL and SR speaker output jacks

OFF: The SL and SR outputs are off.

4. SUBWOOFER*

ON: There will be output from the SUB speaker output jack

OFF: The SUB output is off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

5. CENTER DELAY*

Use this to synchronize the center (CEN) speaker with the rest of the speakers in your Surround Sound

speaker system.

6. REAR DELAY*

Use this to synchronize the SL and SR speakers with the rest of the speakers in your Surround Sound speaker

system.

7. TEST TONE*

Use this after you have connected all of the speakers for the Surround Sound system to test and make sure

there is signal going to all of the speakers.

ON: The text tone will play.

OFF: The test tone will stop playing.

*DOWNMIX must be turned off to access this option

Audio Setup Page

1. SPDIF OUTPUT

Turn the SPDIF output on when using the digital Optical or

AUDIO SETUP

SPDIFOUTPUT

DUALMONO

COMPRESSION

PROLOGIC

LPCMOUTPUT

Coaxial outputs.

2. DUAL MONO

STEREO OUTPUT: Outputs audio in stereo.

L-MONO: Plays the Left side only through both Left and Right

speaker outputs on a Multiplex disc.

R-MONO: Plays the Right side only through both the Left and

Right speaker outputs on a Multiplex disc.

MIX-MONO: Plays virtual stereo with Left and Right Mono

coming out of the Left and Right speaker outputs.

MAINPAGE

AUDIO RELATED

3. COMPRESSION

Setting the compression allows you to play music at a lower

volume without losing the original quality of the sound. Great for late night use.

OFF: No Compression

2/8: High compression for quieter (late night) use

4/8: Medium compression for general use

6/8: Low compression

FULL: Full-volume cinematic sound

4. PRO LOGIC

When using a Surround Sound speaker system, PRO LOGIC must be set to ON or AUTO.

ON: Surround Sound decoder is on.

OFF: Surround Sound is off

AUTO: Automatically detects when Surround Sound format is present on a disc.

5. LPCM OUTPUT

LPCM 48K: For digital audio devices with a maximum sampling rate of 48K.

LPCM 96K: For digital audio devices with a maximum sampling rate of 96K. For use with Progressive Scan

devices.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

Karaoke Setup

ON: Karaoke Mode is on and Digital Key Control is available

OFF: Karaoke Mode is off and Digital Key Control is not available.

To use 5.1 Surround Sound this must be turned off.

KARAOKE PAGE

KARAOKEMODE

MAINPAGE

SETUP KARAOKE FEATURE

Video Page

1. TV DISPLAY

VIDEO PAGE

TVDISPLAY

HDMODE

TVTYPE

VIDEOOUTPUT

To view the standard

4:3 picture or the cut

standard 4:3 picture

4:3 subtitle block to

view the full width of

the widescreen mode

16:9 To view widescreen

picture with a

widescreen TV set

MAINPAGE

VIDEO SETUP

Widescreen TV set

Standard TV set

2. HD MODE

ON: When using a High Deﬁnition TV and discs. Makes 720P available in the TV TYPE menu (below)

OFF: When not using a High Deﬁnition TV discs. 720P is not available in the TV TYPE menu (below)

3. TV TYPE

Set the video output to match you TV’s system format

4. VIDEO OUTPUT

Select the right video output based on which Video Output connection you are using on the rear panel of the

DVG-777K

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

Preferences Page

PREFERENCES PAGE

1. AUDIO

Select the language for discs with multiple languages available.

AUDIO

SUBTITLE

2. SUBTITLE

DISCMENU

PARENTAL

PASSWORD

DEFAULTS

SMARTNAVI

Select your preferred subtitle language for discs with subtitles

available.

3. DISC MENU

Select your preferred language for the disc menu with multi-

language menu capabilities.

4. PARENTAL

Set the parental rating for DVDs.

SET PREFERENCES

5. PASSWORD

Create a new password. The ﬁrst time you change the password you will need to enter the original factory

password which is 3308.

You can also enter 3308 if you forget your new password in order to create a new one.

6. DEFAULTS

Restores all the original factory settings. To restore the default settings, highlight RESET and then press enter.

7. SMART NAVI

NO MENU: There will not be a navigation menu on the TV screen when an Mp3 disc is inserted.

WITH MENU: The SMART NAVI menu will be visible on the TV screen when an Mp3 disc is inserted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

There is no power

• Make sure the power cord is ﬁrmly connected to the back of the DVG-777K and to the power outlet

• If using a power strip/surge-protector, make sure that it is plugged in and switched on

There is no sound

• Make sure everything is connected ﬁrmly and properly

• Make sure there are no defective cables

• Make sure all of your components are turned on

• Make sure all of the components (amp, mixer, TV, etc.) are set to the proper inputs

No picture

• Make sure everything is connected ﬁrmly and properly

• Make sure there are no defective cables

• Make sure all of your components are turned on

• Make sure all of the components (amp, mixer, TV, etc.) are set to the proper inputs

• Make sure the TV or monitor is working correctly

• Make sure the DVG-777K is set to the correct video output mode using the VIDEO button on the remote

control

The disc does not play

• Make sure the disc is inserted correctly (label-side up)

• Make sure the disc is clean and not scratched

• If using a CD/DVD R/RW, try using a different brand as some brands might not be compatible

• Clean the CD lens using a CD lens cleaner

Remote control does not work

• Make sure the batteries are inserted, inserted correctly, and not out of power.

• Point the remote control directly at the remote sensor on the machine

• Move closer to the machine

The picture is unclear

• Make sure the disc is not dirty or damaged

• Make sure that the TV TYPE (P/N button on the remote) is set correctly:

NTSC: In North America

PAL: In Europe and Asia

• Try restarting the DVG-777K

Digital Key Control is not working on discs

• Make sure that Karaoke Mode is turned ON in the System Setup OSD

Menu does not appear when an Mp3/AVI disc, USB device or SM Card is inserted

• Make sure Smart Navi is turned on in the Preferences Page in the Setup Menu. See the Setup Menu section

in this manual for detailed instructions on turning Smart Navi on

Download from Www.Somanuals.com. All Manuals Search And Download.

�

��

V 1.0

www.vocopro.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Technicolor Thomson Stereo System CS84 User Manual
Tekkeon Battery Charger HX6711 User Manual
Tiger Products Co Ltd Lawn Mower 5083E User Manual
Toastmaster Hot Beverage Maker RHEKRET User Manual
Toshiba Security Camera IK HD1 User Manual
Tote Vision Computer Monitor LCD 1510V User Manual
Transition Networks Network Card CPSMC0800 100 User Manual
Tripp Lite Switch B119 302 R User Manual
TROY Group Printer MICR 4350n User Manual
Victor Technology Calculator 1212 3A Series User Manual