VIZIO VP42 HDTV User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO VP42 High
Definition Plasma Television purchase. Thank
you for your support. For maximum benefit of
your set, please read these instructions before
making any adjustments, and retain them for
future reference. We hope you will experience
many years of enjoyment from your new VIZIO
VP42 High Definition Television.
For assistance, please call 714-668-0588 or e-
To purchase or inquire about accessories and
installation services for your VIZIO Plasma HDTV,
call toll free at 888-VIZIOCE (888-849-4623).
We recommend you register your VIZIO VP42
fill in your registration card and mail it in. For
peace of mind and to protect your investment
beyond the standard warranty, VIZIO offers on-
site extended warranty service plans. These
plans give additional coverage during the
standard warranty period. Visit our website or call
us to purchase a plan.
Write down the serial number located on the back
of your VP42.
P __ __ __ __ __ __ __ __ __ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Version 9/11/2006
1
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long
periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power
lines or circuits.
Version 9/11/2006
3
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Opening the Package
Your VIZIO VP42 HDTV and it accompanying accessories are carefully packed in a cardboard carton that
have been designed to protect it from transportation damage. Now you have opened the carton check
that the VP42 HDTV is in good condition and that all of the accessories are included.
The VP42 HDTV weighs approximately 100lb (45kg) and about 43” wide x 32” tall we strongly advise that
you have at least 2 people to unpack and install the HDTV.
The glass surface can easily be scratched or broken so please handle the product gently and never place
the HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Package Contents
VIZIO VP42 HDTV
VIZIO Remote Control by Universal Electronics
AV Cable (Yellow, Red and White Connectors)
Power Cord
VIZIO Bezel and Screen Cleaning Cloth
This User Manual
Quick Setup Guide
Registration Card
VIP Services Brochure
Version 9/11/2006
4
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Additional Certified Accessories for the VIZIO
VP42 HDTV are sold separately
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VP42 HDTV
To purchase or inquire about additional accessories and services for your VIZIO product, visit our web
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is about 380W, please use the power cord designated for TV. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the TV and the wall. If you would like to mount your TV on the wall, please see
below ‘Preparing Your Plasma HDTV for Wall Mounting’ for additional information. Avoid installing the TV
in places with high humidity, dust or smoke so as not to shorten the service life of the electronic
components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these
Version 9/11/2006
5
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Preparing Your Plasma HDTV for Wall Mounting
The VIZIO VP42 HDTV can either be kept on the stand base or mounted on the wall for viewing. If you
choose to mount the VP42 HDTV on the wall, please follow the instructions below for removing the stand
base.
To remove the stand base
1. Unplug all of the cables and cords from your VP42
HDTV.
2. Place the VP42 HDTV face down on a soft and flat
surface (blanket, foam, cloth, etc) to prevent any
damage to the TV.
3. Remove the four (4) screws on each side of the back
panel of the VP42 HDTV located near the bottom so
that the stand base can be removed (see Figure A).
4. Gently pull the stand away from the VP42 HDTV by
grasping firmly on the base.
Figure A
5. Now, the VP42 HDTV can fir securely to a mount
(sold separately) by utilizing the mounting holes in the
center of the back panel of the TV (see Figure B).
Please make sure to read the instructions of your
specific mount to properly hang the VP42 HDTV.
Figure B
To find the perfect mount for the VIZIO VP42 HDTV, browse VIZIO’s certified mount selection at
www.vizio.com or call directly 888-VIZIOCE (888-849-4623).
Version 9/11/2006
6
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Table of Contents
Chapter 1 Basic Controls and Connections..................................................................9
1.1 Front Panel..........................................................................................................................................................9
1.2 Side Panel Controls.............................................................................................................................................9
1.3 Rear Panel Connections ...................................................................................................................................10
1.4 VIZIO Universal Remote Control.......................................................................................................................12
1.4.1 Insertion of Batteries in the Remote Control..............................................................................................15
1.4.2 Remote Control Range..............................................................................................................................15
1.4.3 VIZIO Universal Remote Control Precautions ...........................................................................................15
Chapter 2 Connecting Equipment..................................................................................16
2.1 Which Video Connection Should I Use?............................................................................................................16
2.2 Connecting Your DVD Player............................................................................................................................17
2.2.1 Using HDMI ...............................................................................................................................................17
2.2.2 Using Component Video............................................................................................................................19
2.2.3 Using S-Video (AV2)..................................................................................................................................20
2.2.4 Using Composite (AV) Video.....................................................................................................................21
2.3 Connecting Your HDTV Set-Top Box................................................................................................................22
2.3.1 Using HDMI ...............................................................................................................................................22
2.3.2 Using Component Video............................................................................................................................24
2.4 Connecting Your VCR or Video Camera...........................................................................................................25
2.5 Connecting Coaxial (RF)...................................................................................................................................26
2.5.1 Using Your Antenna or Digital Cable for DTV............................................................................................26
2.5.2 Using Your Antenna or Cable for TV .........................................................................................................27
2.5.3 Using the Antenna or Cable through your VCR.........................................................................................27
2.6 Connecting an external Receiver/Amp..............................................................................................................28
2.7 Connecting a PC Computer ..............................................................................................................................29
Chapter 3 Setting Up to Watch Television...................................................................30
3.1 Basic Plasma HDTV Start Up............................................................................................................................30
3.2 Watching a TV Program....................................................................................................................................32
3.3 Adjusting Basic Plasma HDTV Settings ............................................................................................................32
3.4 Program Information..........................................................................................................................................33
3.5 Information on Plasma HDTV Status.................................................................................................................34
3.5.1 No PIP or POP ..........................................................................................................................................34
3.5.2 With PIP and POP .....................................................................................................................................36
Chapter 4 Advanced Adjustment of HDTV...................................................................38
4.1 Using the On Screen Display (OSD) .................................................................................................................38
4.2 DTV / TV Input Picture Adjustment....................................................................................................................39
4.2.1 Picture Mode .............................................................................................................................................39
4.2.2 Contrast.....................................................................................................................................................39
4.2.3 Brightness..................................................................................................................................................39
4.2.4 Color..........................................................................................................................................................39
4.2.5 Tint.............................................................................................................................................................40
4.2.6 Sharpness .................................................................................................................................................40
4.2.7 Color Temperature.....................................................................................................................................40
4.3 DTV / TV Input Audio Adjustment......................................................................................................................41
4.3.1 Volume ......................................................................................................................................................41
4.3.2 Bass...........................................................................................................................................................41
4.3.3 Treble ........................................................................................................................................................41
4.3.4 Balance......................................................................................................................................................41
4.3.5 Surround....................................................................................................................................................42
4.3.6 Speakers ...................................................................................................................................................42
4.4 DTV / TV Input Special Features.......................................................................................................................42
4.4.1 Language...................................................................................................................................................42
4.4.2 Sleep Timer ...............................................................................................................................................42
4.4.3 Analog Closed Caption..............................................................................................................................42
4.4.4 Digital Closed Caption ...............................................................................................................................42
4.4.5 Digital Closed Caption Style ......................................................................................................................43
4.4.6 PIP Position...............................................................................................................................................43
4.4.7 Image Cleaner...........................................................................................................................................43
4.4.8 Reset All Settings ......................................................................................................................................43
Version 9/11/2006
7
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.5 TV Tuner Setup.................................................................................................................................................44
4.5.1 Tuner Mode ...............................................................................................................................................44
4.5.2 Auto Search...............................................................................................................................................44
4.5.3 Skip Channel .............................................................................................................................................44
4.6 DTV Tuner Setup ..............................................................................................................................................45
4.6.1 Tuner Mode ...............................................................................................................................................45
4.6.2 Auto Search...............................................................................................................................................45
4.6.3 Skip Channel .............................................................................................................................................45
4.6.4 Digital Audio Out........................................................................................................................................45
4.6.5 Time Zone .................................................................................................................................................46
4.6.6 Daylight Saving..........................................................................................................................................46
4.7 DTV / TV Input Parental Control........................................................................................................................46
4.7.1 Parental Lock Enable.................................................................................................................................46
4.7.2 TV Rating...................................................................................................................................................47
4.7.3 Movie Rating..............................................................................................................................................47
4.7.4 Blocked Unrated Programming..................................................................................................................48
4.7.5 Change the Password ...............................................................................................................................48
4.8 Video Input Picture Adjustment .........................................................................................................................49
4.9 Video Input Audio Adjustment...........................................................................................................................49
4.10 Video Input Special Features ..........................................................................................................................49
4.11 Video Input Parental Control ...........................................................................................................................50
4.12 PC Input Picture Adjustment ...........................................................................................................................50
4.12.1 Auto Adjust ..............................................................................................................................................50
4.12.2 H-SIZE.....................................................................................................................................................50
4.12.3 Horizontal Shift ........................................................................................................................................50
4.12.4 Vertical Shift ............................................................................................................................................50
4.12.5 Fine Tune ................................................................................................................................................50
4.13 PC Input Audio Adjustment .............................................................................................................................51
4.14 PC Input Special Features ..............................................................................................................................51
4.14.1 Understanding Viewing Features.............................................................................................................52
4.14.2 Viewing Modes ........................................................................................................................................52
4.14.3 Picture-In-Picture(PIP)/Picture-by-Picture(POP)Mode.............................................................................53
4.14.4 Adjusting Basic PIP/POP Settings...........................................................................................................53
4.14.5 Setting the Sleep Timer ...........................................................................................................................54
4.15 Programming the VIZIO Universal Remote Control.........................................................................................55
4.15.1 Programming for VCR .............................................................................................................................55
4.15.2 Programming for Cable Set-Top Box.......................................................................................................55
4.15.3 Programming for DVD Player ..................................................................................................................56
4.15.4 Searching for Component Codes ............................................................................................................56
4.16 Using a Cable or Satellite Remote ..................................................................................................................56
Chapter 5 Maintenance and Troubleshooting.............................................................57
5.1 Maintenance......................................................................................................................................................57
5.2 Troubleshooting Guide......................................................................................................................................57
5.3 Telephone & Technical Support ........................................................................................................................59
5.4 Compliance .......................................................................................................................................................60
5.5 FCC Class B Radio Interference Statement......................................................................................................60
Chapter 6 Miscellaneous Information ...........................................................................61
6.1 Specifications....................................................................................................................................................61
6.2 Glossary – Standard Definitions........................................................................................................................62
6.3 Index .................................................................................................................................................................63
6.4 Limited Product Warranty..................................................................................................................................65
6.4.1 VIZIO Extended Service Warranty.............................................................................................................65
6.5 Component Program Codes..............................................................................................................................66
Version 9/11/2006
8
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Chapter 1 Basic Controls and Connections
1.1 Front Panel
Power LED – Lights green when powered on, yellow
when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.
1.2 Side Panel Controls
Power (
) – Switch the VP42 HDTV on by pressing the button once.
Press the button again to the VP42 HDTV off.
Menu – This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will return to the previous menu level.
Channel ▲/▼ – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons function as up and down controls
in the OSD menus.
Volume ◄/► – Use these buttons to increase or decrease to the
speaker volume. While the OSD is active, these buttons function as left
and right controls in the OSD menus.
Input (Enter) – Repeated pressing of this buttons steps through the
input sources in the following sequence: TV, AV1, AV2, Component 1,
Component 2, RGB, HDMI 1 and HDMI 2. Once you have stepped
through the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 9/11/2006
9
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
1.3 Rear Panel Connections
Left Portion
1
2
3
1.
2.
DTV – Connect to an antenna or digital cable for Digital TV.*
OPTICAL DIGITAL AUDIO OUT – When the DTV input is selected for viewing, the digital
audio associated with digital programming will be available on this SPDIF Optical connector
for connection to your home theatre system. The black color band on the rear of the TV
indicates this connection.
3.
SERVICE – This custom communication port is for factory service only.
Version 9/11/2006
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Right Portion
5
6
7
9
4
10
11
8
10
4.
5.
HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection. Your VIZIO Certified HDMI cables are available for purchase from
www.vizioce.com or by calling 888-VIZIOCE (888-849-4623).
HDMI 2 – Connect the secondary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection. For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here. .
Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from
www.vizioce.com or by calling 888-VIZIOCE (888-849-4623).
6.
7.
RGB PC – Connect the video and audio from a computer here. The blue color band on the
rear of the TV indicates this connection.
COMPONENT 1 (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for
component video devices such as a DVD Player or set top box here. From left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The green color band on the rear of the TV indicates this connection.
8.
COMPONENT 2 (YPb/CbPr/Cr with Audio L/R) – Connect the secondary source for
component video devices such as a DVD Player or set top box here. From left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The purple color band on the rear of the TV indicates this connection.
9.
AV1 In – Connect the primary source for composite video devices, such as a VCR or video
game. Use the white and red connectors to connect the external audio from the same source.
The yellow color band on the rear of the TV indicates this connection.
10.
AV2 In – Connect the secondary source for composite video devices, such as a VCR or
video game. Use the white and red connectors to connect the external audio from the same
source. The orange color band on the rear of the TV indicates this connection. The S-Video
connector in the red area is associated with AV2 and if connected will take priority over AV2
RCA connector.
11.
Audio Out – Connect the audio from the Plasma HDTV to an external device, such as a
home theatre system, external amplifier or stereo. Speakers cannot be connected directly to
here. The gray color band on the rear of the TV indicates this connection.
Version 9/11/2006
11
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
1.4 VIZIO Universal Remote Control
The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four
different components. The remote control button functions are explained on the following pages.
VIZIO Remote Control Button Description
SET – This button starts all programming of the Remote Control.
Remote LED – Blinks when the remote operates.
POWER – Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
TV – This button has been pre-programmed to select the codes to operate
the VP42 HDTV.
VCR – This button selects a programmed VCR.
CABLE – This button selects a programmed cable TV set-top box or a
satellite TV set-top box.
DVD – This button selects a programmed DVD player.
Number Button Pad – Use these buttons to select a channel or enter a
password.
INPUT – This button allows the user to cycle through the inputs.
- / ENTER – This button works as a DASH button in the DTV mode. When
selecting a digital channel directly use this button for the separation of
main and sub-channels. For example, channel 28-2 would be selected by
the button sequence 2 8 ENTER 2.
CH (+ or -) – These buttons change the channels up or down.
LAST – This button recalls the previously viewed channel.
MUTE – This button turns the sound on and off.
VOL (+ or -) – These buttons turn the volume up or down.
MENU – Use this button for the On-Screen Display (OSD) menus.
INFO – This button displays the image and system information display.
GUIDE – This button displays program information. Note: this button is
only functional for DTV.
EXIT – This button exits the On-Screen Display (OSD) menus.
- These buttons navigate the On-Screen Display (OSD).
OK – Use this button to select your chosen option in On-Screen Display
(OSD) menus.
NOTE: This is a programmable remote supporting
up to 4 devices (see TV, VCR, CABLE, DVD buttons
at the top of the remote). If the remote is not
working with your VIZIO TV, press the TV button
on the remote to set the functions back to TV.
Version 9/11/2006
12
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
WIDE/Record – This button cycles through the available screen formats.
The options are Wide, Normal, Zoom, Panoramic. Note: in RGB/PC mode
the options are 4:3 and 16:9. This button also functions as VCR Record
when the component is activated with the remote control.
SLEEP/Pause – This button allows the user to select the sleep options by
adjusting the timer in 30 minute increments up to 120 minutes. Additionally,
this button pauses the CD, DVD or VCR when the component is activated
with the remote control.
MTS/Play – This button will select the MTS options of Stereo, SAP or
Mono in TV mode and alternate audio channels, where available, in DTV
mode. Additionally, this button plays the CD, DVD or VCR when the
component is activated with the remote control.
CC/Stop – This button will select the Closed Caption mode. The options
are OFF, CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3 OR TEXT4.
Additionally, this button stops the CD, DVD or VCR when the component is
activated with the remote control.
TV/Previous Chapter – Repeated pressing of this button switches between
DTV and TV programming. Note: this button has been pre-programmed
for the VIZIO VP42 HDTV. This button also functions as a DVD Previous
Chapter when the DVD player is activated with the remote control.
AV/Reverse – Repeated pressing of this button with switch between AV1
and AV2 inputs. Additionally, this button rewinds the CD, DVD or VCR
when the component is activated with the remote control.
COMPONENT/Forward – Repeated pressing of this button with switch
between Component 1 and Component 2 inputs. Additionally, this button
forwards the CD, DVD or VCR when the component is activated with the
remote control.
HDMI/ Next Chapter – Repeated pressing of this button will switch
between HDMI 1 and HDMI 2 inputs. Additionally, this button functions as
a DVD Next Chapter when the component is activated with the remote
control.
Version 9/11/2006
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
ZOOM (- and +) – Use these buttons to increase or decrease the size of
the picture. Note that in the zoom mode parts of the picture will not be
visible because they extend beyond the edges of the screen.
FREEZE – Press this button to “Freeze-Frame” the current screen. Press
this button again the continue playing.
RGB – This button selects an RGB Analog component such as a PC.
PIP – Use this button to activate the Picture-In-Picture mode.
PIP CH (- and +) – These buttons are used to select the channels within
the PIP screen when DTV/TV is the PIP input selected.
AUDIO – Press this button to switch the audio from the main screen to the
sub-screen while in PIP or POP mode.
PIP INPUT – Press the button to choose the PIP input. Note: The TV must
be in PIP/POP mode for this button to be functional. For additional
information regarding the PIP/POP options, see section 4.14.3 - Picture-In-
Picture (PIP)/Picture-by-Picture (POP) Mode, page 53.
PIP SIZE – Press this button to select the size of the PIP screen from one
of the following: small, medium or large.
MODE – Use this button to change the picture mode from Custom,
Standard, Movie and Game.
SWAP – Used to swap the inputs from the main screen and the sub-
screen while in PIP/POP mode.
Version 9/11/2006
14
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
1.4.1 Insertion of Batteries in the Remote Control
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the
batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage
that may pose a fire risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage
that may pose a fire risk or lead to personal injury.
Dispose of the batteries in accordance with local laws and regulations.
Keep the batteries away form children and pets.
1.4.2 Remote Control Range
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the
receiver window, 30° to the left and right, 20° up and down.
1.4.3 VIZIO Universal Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does respond at all, check the batteries. If the
batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Version 9/11/2006
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Chapter 2 Connecting Equipment
2.1 Which Video Connection Should I Use?
The VIZIO VP42 HDTV has six different ways to connect your video equipment from a basic connection
to the most advanced for digital displays.
Rear
Connection
Quality (type)
Panel
Color
Codes
Connector
Description
HDMI (High-Definition Multimedia Interface) - It is
the first and only industry-supported, uncompressed,
all-digital audio/video interface. HDMI provides an
interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and an
audio and/or video monitor, such as a digital
television (DTV), over a single cable.
Best
White
(digital)
DTV Coaxial RF. When used for MPEG2 encoded
bit streams from ATSC broadcast programming, this
input takes advantage of the High Definition content.
Best
(digital)
- - - - - - - - - - - -
Good
Black
Blue
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TV Coaxial RF. This is the connection for standard
NTSC TV using antenna or cable.
(analog)
RGB PC (VGA) – This video input has separate red,
green and blue color components. The signal
carries horizontal and vertical sync information on
the green signal. This is most commonly used for
PC input.
Best
(analog)
Component 1/2 - The video signal is separated into
three signals, one containing the black-and-white
information and the other two containing the color
information. This enhancement over S-Video takes
advantage of the superior picture provided by
progressive scan DVD players and HDTV formats.
Green
and
Purple
Better
(analog)
S-Video (AV2) - The video signal is separated into
two signals, one containing the black-and-white
information and the other containing the color
information. Separating the color in this way avoids
‘cross color’ effects where closely spaced black and
white lines are erroneously displayed in color. It also
enables text to be displayed more sharply.
Good
Red
(analog)
Yellow
and
Orange
AV1/2 (Composite) - The complete video signal is
carried through this single pin connector. This is the
most commonly used video connection.
Good
(analog)
Note: For more info refer to the Quick Start Guide
Version 9/11/2006
16
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.2 Connecting Your DVD Player
You have several options for connecting your DVD player to your VP42 HDTV – HDMI, Component, S-
Video and Composite (AV) inputs. Based on your home theater configuration, you can decide which
option is the right one for you.
2.2.1 Using HDMI
DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be
connected to the HDMI input of the VIZIO VP42 HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable available up to 10 meters or less.
Connecting your DVD Player (Best):
1.
2.
Turn off the power to the Plasma HDTV and DVD player.
Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI
Input (white color area) at the rear of the Plasma HDTV.
3.
4.
Turn on the power to the Plasma HDTV and your DVD player.
Select HDMI using the INPUT button on the remote or side of the Plasma HDTV, or directly
by pressing the HDMI button on the Remote Control.
Note:
a)
If you are already using the HDMI 1 input for another component, or you do not want to use
the HDMI 1 input for the DVD player, you can connect the DVD player to the HDMI 2
connection.
b)
Refer to your DVD player user manual for more information about the video output
requirements of the product.
Version 9/11/2006
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
For DVD Players with DVI:
1.
2.
Turn off the power to the Plasma HDTV and DVD player.
Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the
HDMI Input (white color area) at the rear of the Plasma HDTV.
3.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVI output on your DVD player and connect the other end to
the audio connectors associated with the HDMI input (white area) at the rear of the Plasma
HDTV.
4.
5.
Turn on the power to the Plasma HDTV and your DVD player.
Select HDMI using the INPUT button on the remote or side of the Plasma HDTV, or directly
by pressing the HDMI button on the Remote Control.
Note: Refer to your DVD player user manual for more information about the video output requirements of
the product.
Version 9/11/2006
18
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.2.2 Using Component Video
Connecting your DVD Player (Better):
1.
2.
Turn off the power to the Plasma HDTV and DVD player.
Connect the Y (green color) connector on your DVD player to the corresponding Y (green
color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the Plasma HDTV.
3.
4.
5.
Connect the Pb (blue color) connector on your DVD player to the corresponding Pb (blue
color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the Plasma HDTV.
Connect the Pr (red color) connector on your DVD player to the corresponding Pr (red color)
connector in the Component 1 group (green color area - row of connectors nearest to you
when viewing from the rear of the TV) at the rear of the Plasma HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your DVD player and connect the other
end to the audio connectors associated with the Component 1 input (green color area) at the
rear of the Plasma HDTV.
6.
7.
Turn on the power to the Plasma HDTV and DVD player.
Select Component 1 using the INPUT button on the remote or side of the Plasma HDTV, or
directly by pressing the Component button on the Remote Control.
Note:
a)
If you are already using the Component 1 input for another component, or you do not want
to use the Component 1 input for the DVD player, you can connect the DVD player to the
Component 2 connections coded by the purple area.
b)
Refer to your DVD player user manual for more information about the video output
requirements of the product.
Version 9/11/2006
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.2.3 Using S-Video (AV2)
Connecting your DVD Player (Good):
1.
2.
Turn off the power to the Plasma HDTV and DVD player.
Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV2
group (red area) at the rear of the Plasma HDTV.
3.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the S-Video output on your DVD player and connect the other
end to the audio connectors associated with the AV2 input (orange area) at the rear of the
Plasma HDTV.
4.
5.
Turn on the power to the Plasma HDTV and DVD player.
Select AV2 using the INPUT button on the remote or side of the Plasma HDTV, or directly by
pressing the AV button on the Remote Control.
Note: Refer to your DVD player user manual for more information about the video output requirements of
the product.
Version 9/11/2006
20
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.2.4 Using Composite (AV) Video
Connecting your DVD Player (Good):
1.
2.
Turn off the power to the Plasma HDTV and DVD player.
Connect the Video (yellow color) connector on your DVD player to the Video (yellow color)
connector in the AV1 group (yellow color area - row of connectors nearest to you when
viewing from the rear of the TV) at the rear of the Plasma HDTV.
3.
Connect the R (red color) and L (white color) audio connectors on your DVD player to the
corresponding R (red color) and L (white color) audio input connectors in the AV1 group
(yellow color area - row of connectors nearest to you when viewing from the rear of the TV) at
the rear of the Plasma HDTV.
4.
5.
Turn on the power to the Plasma HDTV and DVD Player.
Select AV1 using the INPUT button on the remote or side of the Plasma HDTV, or directly by
pressing the AV button on the Remote Control.
Note:
a) If you are already using the AV1 input for another component, or you do not want to use the AV1
input for the DVD player, and you are not using the S-Video input for another component, you
can connect the DVD player to the AV2 connections coded by the orange area.
b) Refer to your DVD player user manual for more information about the video output requirements
of the product.
Version 9/11/2006
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.3 Connecting Your HDTV Set-Top Box
2.3.1 Using HDMI
HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the
Plasma HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters or less. See
www.vizioce.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Connecting your Set-Top Box (Best):
1.
2.
Turn off the power to the Plasma HDTV and HDTV Set-Top Box.
Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to
the HDMI Input (white color area) at the rear of the Plasma HDTV.
3.
4.
Turn on the power to the Plasma HDTV and HDTV Set-Top Box.
Select HDMI using the INPUT button on the remote or side of the Plasma HDTV, or directly
by pressing the HDMI button on the Remote Control.
Note:
a)
The HDMI input on the Plasma TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display
for added security and protection.
b)
c)
If you are already using the HDMI 1 input for another component, or you do not want to use
the HDMI 1 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI 2
connection.
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 9/11/2006
22
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
For Set-Top Boxes with DVI:
1.
2.
Turn off the power to the Plasma HDTV and HDTV Set-Top Box.
Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end
to the HDMI Input (white color area) at the rear of the Plasma HDTV.
3.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVI output on your HDTV Set-Top Box and connect the other
end to the audio connectors associated with the HDMI input (white area) at the rear of the
Plasma HDTV.
4.
5.
Turn on the power to the Plasma HDTV and HDTV Set-Top Box.
Select HDMI using the INPUT button on the remote or side of the Plasma HDTV, or directly
by pressing the HDMI button on the Remote Control.
Note: The HDMI Input is for HD Video and will only support 640x480 at 60Hz from a PC. Use the RGB
PC input for a greater selection of PC formats.
Note:
d)
The HDMI input on the Plasma TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display
for added security and protection.
e)
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 9/11/2006
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.3.2 Using Component Video
Connecting your Set-Top Box (Better):
1.
2.
Turn off the power to the Plasma HDTV and HDTV Set-Top Box.
Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y
(green color) connector in the Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the Plasma HDTV.
3.
4.
5.
Connect the Pb (blue color) connector on your HDTV Set-Top Box to the corresponding Pb
(blue color) connector in the Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the Plasma HDTV.
Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red
color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the Plasma HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your HDTV Set-Top Box and connect
the other end to the audio connectors associated with the Component 1 input (green color
area) at the rear of the Plasma HDTV.
6.
7.
Turn on the power to the Plasma HDTV and HDTV Set-Top Box.
Select Component 1 using the INPUT button on the remote or side of the Plasma HDTV, or
directly by pressing the Component button on the Remote Control.
Note:
a)
If you are already using the Component 1 input for another component, or you do not want
to use the Component 1 input for the Set-Top Box, you can connect the Set-Top Box to the
Component 2 connections coded by the orange area.
b)
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 9/11/2006
24
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.4 Connecting Your VCR or Video Camera
1.
2.
Turn off the power to the Plasma HDTV and VCR or Video Camera.
Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the
AV2 group (red area) at the rear of the Plasma HDTV.
3.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the S-Video output on your VCR or Video Camera and connect
the other end to the audio connectors associated with the AV2 input (orange area) at the rear
of the Plasma HDTV.
4.
5.
Turn on the power to the Plasma HDTV and VCR or Video Camera.
Select AV2 using the INPUT button on the remote or side of the Plasma HDTV, or directly by
pressing the AV button on the Remote Control.
Note: Refer to your VCR or Video Camera user manual for more information about the video output
requirements of the product.
Version 9/11/2006
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.5 Connecting Coaxial (RF)
2.5.1 Using Your Antenna or Digital Cable for DTV
1.
2.
Turn off the power to the Plasma HDTV.
Connect the coaxial (RF) connector from your antenna or digital cable to
the DTV/TV CABLE/ANTENNA connector at the rear of the Plasma HDTV.
3.
4.
Turn on the power to the Plasma HDTV.
Select DTV using the INPUT button on the remote or side of the Plasma
HDTV, or directly by pressing the TV button on the Remote Control.
Note:
a)
Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or
consult your cable, satellite or TV station operator.
b)
information.
c)
d)
Make sure the antenna and coaxial cable are correctly grounded.
VIZIOCE (1-888-849-4623).
Version 9/11/2006
26
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.5.2 Using Your Antenna or Cable for TV
1.
2.
Turn off the power to the Plasma HDTV.
Connect the coaxial (RF) connector from your antenna or cable to the
DTV/TV CABLE/ANTENNA connector at the rear of the Plasma HDTV
3.
4.
Turn on the power to the Plasma HDTV.
Select TV using the INPUT button on the remote or side of the Plasma
HDTV, or directly by pressing the TV button on the Remote Control.
2.5.3 Using the Antenna or Cable through your VCR
1.
2.
Turn off the power to the Plasma HDTV and VCR.
Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the
rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear
of the Plasma HDTV.
3.
4.
Turn on the power to the Plasma HDTV and VCR.
Select TV using the INPUT button on the remote or side of the Plasma
HDTV, or directly by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.
Version 9/11/2006
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.6 Connecting an external Receiver/Amp
1.
2.
Turn off the power to the Plasma HDTV and Receiver/Amp.
Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white
area) audio connectors at the rear of the Plasma HDTV.
3.
4.
Turn on the power to the Plasma HDTV and Receiver/Amp.
Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5.
6.
7.
Press the
select the Audio Adjust menu.
on the remote control to
Press the
select SPEAKERS.
on the remote control to
Press the
on the remote control to
select OFF so that the sound from the
Plasma HDTV will now be routed
through your Receiver/Amp system.
Note:
a)
b)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital
audio input you can connect it to the optical DIGITAL
AUDIO OUT (black area) at the rear of the Plasma
HDTV. This is active when receiving digital audio with
the programs from the DTV/TV CABLE/ANTENNA
input.
Version 9/11/2006
28
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
2.7 Connecting a PC Computer
1.
2.
Turn off the power to the Plasma HDTV and PC Computer.
Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the
other end to the RGB PC input (purple area) at the rear of the Plasma HDTV.
3.
Connect the Audio Out on your pc computer to the RGB PC Audio input (purple area) at the
rear of the Plasma HDTV.
4.
5.
Turn on the power to the Plasma HDTV and PC Computer.
Select RGB using the INPUT button on the remote or side of the Plasma HDTV, or directly by
pressing the RGB button on the Remote Control.
Note:
a)
For the best picture quality when connecting a pc computer through RGB PC, set your pc
computer timing mode to VESA 1366x768 at 60Hz. Please refer to the pc or graphic card’s
user guide for additional information on how to set the timing mode.
b)
c)
Refer to your pc computer user manual for more information about the video output
requirements of the product.
A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an
electronics store.
Version 9/11/2006
29
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Chapter 3 Setting Up to Watch Television
For ‘Preparing Your Plasma HDTV for Wall Mounting’, see page 6.
3.1 Basic Plasma HDTV Start Up
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the Plasma HDTV, and then
plug the power cord into an AC wall socket.
2. Connect Audio and Video Cables to the Plasma HDTV
(see pages 16 ~ 29 for detailed steps)
3. Turning Power On
Once all the components are connected, press the Power ON
button on the side of the Plasma HDTV, or press the Power
ON (Red) button on the remote control.
4. Select Input Source
Select the Input Source for the Plasma HDTV by pressing the
INPUT button on the side of the TV or using the Input button
on the remote control. Pressing this button will cycle you
through the following options: TV, AV1, AV2, Component 1,
Component 2, RGB, HDMI 1 and HDMI 2.
5. Using DTV and TV with an Antenna or Cable
If an antenna or cable source is connected to the DTV/TV
input, you will need to select TV using the INPUT button on the
remote control or the side of the Plasma HDTV, or directly by
pressing the TV button on the remote control, and Auto Scan for the available TV channels..
Please follow the instructions below:
a. Select TV input (see Step 4
above) by pressing the INPUT
button on the side of the Plasma
HDTV or using the INPUT button
on the remote control, or directly
by pressing the TV button on the
remote control. The screen will
show ‘snow’ and an OSD panel
that says, “Initial Setup”
b. The Language option is
highlighted and the default is
English. If you wish to change the
OSD language to Français or
Español, press the
or
button on the remote control to select the language you want.
Note: If you do not see this option within the OSD, you might have selected the wrong input in the
previous steps and you will need to repeat step 4 (above) to select the correct input source.
Version 9/11/2006
30
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
c. Press the
button to highlight
the TUNER MODE option. There
are three choices for the input,
CABLE or AIR (for antenna), and
if you are not sure of your source
or you want the TV to scan for
both types, AUTO. Press the
or
button to select your choice.
d. Once selected, press the
button to highlight Auto Search to
scan the available channels.
e. Press the OK button to start the
search. An information panel will be
displayed showing the progress of the
search for analog (NTSC) and Digital
(ATSC) channels.
If you wish to cancel the search for
channels, press and hold the MENU
or OK button for a few seconds.
to get information about availability in your area, type of antenna and in which direction to
point your antenna. The channel availability through cable depends upon which channels
your cable operator supplies in Clear QAM; consult your cable operator for more
information.
6. Using a PC
If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at
60Hz for best picture quality (refer to the graphic card’s user guide for questions on how to set
this timing mode).
Version 9/11/2006
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
3.2 Watching a TV Program
Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections
are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge
protector.
1.
2.
Press the power button on the remote or on the side of the Plasma HDTV. The status LED
on the front will change to solid green.
There are 3 options for selecting your programming:
a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA
input, you can select TV directly by pressing the TV button on the remote, or by pressing
the INPUT button on the remote or on the side of the Plasma HDTV.
b. If you are watching broadcasts through a cable or satellite set-top box connected by an
HDMI cable, select HDMI 1 or HDMI 2 directly by pressing the HDMI button on the
remote, or by pressing the INPUT button on the remote or on the side of the Plasma
HDTV.
c. If you are watching broadcasts through a cable or satellite set-top box connected by a
Component (YPbPr) cable, select Component 1 or Component 2 directly by pressing the
Component button on the remote, or by pressing the INPUT button on the remote or on
the side of the Plasma HDTV.
Note: You should be able to see a picture. If you do not, make sure that all of the Plasma HDTV
connections are secure and you have selected the correct video input source.
3.
When using option 2a, press the Channel buttons on the remote or the +/- buttons on the side
of the Plasma HDTV to change the channel. Note: The Channel buttons, on the side of the
Plasma and on the remote, control will not work if you are watching a program using HDMI,
Component 1, Component 2, AV1 and AV2 inputs.
3.3 Adjusting Basic Plasma HDTV Settings
Volume
To increase the volume, press and hold the VOL+ or VOL- button on the side of the Plasma HDTV or
remote control until the desired level is reached.
TV Channels
To step up or down through the available TV channels, press the CH+ or CH- button on the side of the
Plasma HDTV or remote control once for the next or previous channel, or hold it depressed until the
desired channel is reached. Note: Channel up and down will only operate in DTV and TV modes.
Wide
Using this feature, you can watch video content in different size modes on the TV. Press the WIDE
button on the remote control to switch among the modes.
Fore more information see Section 4.14.2 – Viewing Modes, on page 52.
Version 9/11/2006
32
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
3.4 Program Information
Press the GUIDE button on the remote and program information for the channel you are watching will be
displayed on the screen with the live program content in a small window in the lower left corner of the
panel.
Press the
or
button to scroll up or down the channels. Each time you pause at a channel, the
program list will update with the program schedule for the channel and the window will show the live
program for that channel. Press the GUIDE button to exit this feature.
Version 9/11/2006
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
3.5 Information on Plasma HDTV Status
When you change TV channels or inputs, or press the INFO button on the remote, an Information Banner
is displayed for a few seconds to tell you the status of the Plasma HDTV.
3.5.1 No PIP or POP
TV Input, no PIP
480i; is the only format available on
NTSC SDTV (Standard Definition TV)
Main Screen
TV Input
TV Channel Number
Current
Program
Rating
Closed Caption
is available but
is turned off
Audio is Mono
Stereo & SAP are
also available
DTV Input, no PIP
DTV Channel Number
Number after – is Sub Channel
Only one Audio Channel
In this case English
Program Information:
Provided by Broadcaster
Station Name
1080i HD: HDTV being received
May also be 720P for HDTV
480P is EDTV
Current
Program
Rating
Closed Caption
is available but
is turned off
Provided by
Broadcaster
Version 9/11/2006
34
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Component (YPbPr) Input, no PIP
Component 1 Input
Vertical Refresh Rate 60Hz
Main Screen
480i NTSC SDTV (Standard Definition TV),
Closed Caption
is available but
is turned off
sometimes called YCbCr.
Can be 480P, 720P or 1080i
AV Input, no PIP
AV1 and AV2 Information Banner have similar information to the Component 1 and Component 2
Information Banners.
PC Input, no PIP
PC Input
Vertical Refresh Rate 60Hz
Main Screen
PC Format is 1024x768
Version 9/11/2006
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
3.5.2 With PIP and POP
TV Input, with PIP
Audio is Mono
PIP/POP Input
Main Input is TV
is Component 1
Stereo & SAP are
also available
TV Channel Number
Current
Program
Rating
Closed Caption
is available but
is turned off
480i; is the only format available on
NTSC SDTV (Standard Definition TV)
DTV Input, with PIP
Only one Audio
Channel
DTV Channel Number
Number after – is Sub Channel
PIP/POP
Input is TV
Program Information:
Provided by Broadcaster
In this case English
Station Name
1080i HD: HDTV being received
May also be 720P for HDTV
480P is EDTV
Current
Program
Rating
Closed Caption
is available but
is turned off
Provided by
Broadcaster
Version 9/11/2006
36
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Component Input, with PIP
Vertical Refresh Rate 60Hz
Main Input is Component 1
PIP/POP
Input is AV1
480i NTSC SDTV (Standard Definition TV),
Closed Caption
is available but
is turned off
sometimes called YCbCr.
Can be 480P, 720P or 1080i
AV Input, with PIP
AV1 and AV2 Information Banner have similar information to the Component 1 and Component 2
Information Banners.
PC Input, with PIP
Vertical Refresh Rate 60Hz
Main Input is PC
PIP/POP Input is AV1
Version 9/11/2006
PC Format is 1024x768
37
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Chapter 4 Advanced Adjustment of HDTV
4.1 Using the On Screen Display (OSD)
The remote control or the control buttons on the right hand side of the TV can control all the function
settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other
settings. The TV will save changes made to the settings, even if the TV is turned off.
The OSD consists of several menu options: Picture Adjust, Audio Adjust, Special Features, TV Tuner
Setup and Parental Controls. The main menu options may very depending on your selected input source.
Note: Some of the main menu options may have additional submenus, i.e. the TV Rating submenu for
Parental Controls.
1.
Press the MENU button on the remote
control or the side of the TV and the
Picture Adjust menu will be shown on
the screen.
2.
Press the
or
button on the
remote control or the VOL + or VOL –
button on the side of the TV to select
one of the other menu options.
Picture Adjust Audio Adjust Special Features TV Tuner Setup Parental Controls
3.
4.
Once the menu option is displayed, press the
CH + or CH – button on the side of the TV to select one of the items to adjust.
or
button on the remote control or the
Press the
button on the remote control or the VOL – button on the side of the TV to begin
adjustment of the item.
5.
6.
7.
Press OK when finished.
Repeat steps 2 through 5 to adjust additional options within this menu.
Once the adjustments are completed press the MENU button repeatedly to exit the OSD
completely.
Version 9/11/2006
38
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.2 DTV / TV Input Picture Adjustment
4.2.1 Picture Mode
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE ADJUST
page. Press the
Mode selection.
button to highlight the Picture
Use the
or
button to choose from Custom,
Standard, Movie and Game.
If Standard, Movie or Game is chosen for the
Picture Mode, then the only Picture Adjustments
available for you are for the Backlight and Color
Temperature; the rest are preset.
4.2.2 Contrast
Press the
button to highlight the Contrast selection.
Press the button to start adjusting the contrast and the menu page will disappear and be replaced by a
small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum
available levels. Use the
or
button to adjust the level.
The Contrast adjusts the white levels in the picture. If the contrast is too low the picture will look washed
out and if the contrast is too high you will not be able to see any detail in the bright parts of a picture.
4.2.3 Brightness
Press the
button to highlight the Brightness selection.
Press the button to start adjusting the brightness and the menu page will disappear and be replaced by
a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum
available levels. Use the
or
button to adjust the level.
The Brightness adjusts the black levels in the picture. If the brightness is too low you will not be able to
see the detail in darker parts of the picture and if the brightness is too high the picture will look washed
out.
4.2.4 Color
Press the
button to highlight the Color selection.
Press the
button to start adjusting the color and the menu page will disappear and be replaced by a
small Color Indicator Bar so you can see the color level between the minimum and maximum available
levels. Use the or button to adjust the level.
The Color adjusts the amount of color in the picture.
Version 9/11/2006
39
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.2.5 Tint
Press the
button to highlight the Tint selection.
Press the button to start adjusting the tint and the menu page will disappear and be replaced by a small
Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position.
Use the
or
button to adjust the level.
The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for
a realistic appearance. In most cases, the default middle position is correct. If people’s faces look too
orange try reducing the level of color first as the case of this is often too much color.
4.2.6 Sharpness
Press the
button to highlight the Sharpness selection.
Press the button to start adjusting the sharpness and the menu page will disappear and be replaced by
a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum
available levels. Use the
or
button to adjust the level.
The Sharpness adjusts the sharpness of the picture.
4.2.7 Color Temperature
Press the
button to highlight the option for
Color Temperature selection.
NORMAL, the 6500K setting, is the correct
selection for TV, Video and Movie viewing.
Press the
or button if you want to choose the
Cool or Warm option.
If you choose the Custom option, then a new
menu will be displayed showing the primary color
items, Red, Green and Blue. Press the
to highlight the color you wish to adjust.
button
Press the
button to start adjusting the color and
the menu page will disappear and be replaced by
a small Color (Red, Green or Blue) Indicator Bar
as before. Use the
color.
or
button to adjust the
Press the OK button when finished. Repeat the
procedure to adjust the other colors if desired.
Version 9/11/2006
40
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.3 DTV / TV Input Audio Adjustment
4.3.1 Volume
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE ADJUST
page. Press the
ADJUST page.
button to display the AUDIO
Press the
Press the
button to highlight the Volume selection.
button to start adjusting the volume and the menu page will disappear and be replaced by a
small Volume Indicator Bar so you can see the volume level between the zero and maximum available
levels. Use the or button to adjust the level.
The Volume Indicator Bar will also appear when watching a program on your TV is the Volume button on
the remote or the side of the TV is pressed.
4.3.2 Bass
Press the
button to highlight the Bass selection.
Press the
button to start adjusting the bass and the menu page will disappear and be replaced by a
small Bass Indicator Bar, as before, so you can see the bass level between the zero and maximum
available levels. Use the
or
button to adjust for bass boost or attenuation.
4.3.3 Treble
Press the
button to highlight the Treble selection.
Press the
button to start adjusting the treble and the menu page will disappear and be replaced by a
small Treble Indicator Bar, as before, so you can see the treble level between the zero and maximum
available levels. Use the
or
button to adjust for treble boost or attenuation.
4.3.4 Balance
Press the
button to highlight the Balance selection.
Press the button to start adjusting the balance and the menu page will disappear and be replaced by a
small Balance Indicator Bar, as before, so you can see the balance adjustment to the left or right of the
nominal position. Use the
or
button to adjust the left/right balance.
Version 9/11/2006
41
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.3.5 Surround
Press the
button to highlight the Surround selection.
Press the button to select for the simulated surround sound feature to be On or Off.
4.3.6 Speakers
Press the
button to highlight the Speakers selection.
Press the button to turn the internal speakers On or Off. You may want to turn-off the internal speakers
when listening to the audio through your Home Theatre System.
4.4 DTV / TV Input Special Features
The Special Features menu for DTV is slightly different from the Special Features menu for TV. The
differences will be pointed out where they exist.
4.4.1 Language
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE ADJUST
page. Press the
button until the SPECIAL
FEATURES page is displayed.
Press the
button to highlight the Language
selection. The default is English.
Press the
button to select Français or Español.
4.4.2 Sleep Timer
Press the
button to highlight the Sleep Timer selection. Press the
button to select the timer to
turn-off the TV in 30, 60, 90 or 120 minutes.
4.4.3 Analog Closed Caption
When watching regular analog (NTSC) TV, the Analog CC feature is available in the Special Features
menu.
Press the
Press the
button to highlight the Analog CC selection.
button to select CC1, CC2, CC3, CC4, TT1, TT2, TT3 or TT4. Closed Caption for regular
TV is usually CC1 or CC2.
4.4.4 Digital Closed Caption
When watching DTV, the Digital CC feature is available in the Special Features menu.
Press the
Press the
button to highlight the Digital CC selection.
button to select Service 1.
Version 9/11/2006
42
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.4.5 Digital Closed Caption Style
When selecting Digital Closed Caption you are
also able to customize the look of the Closed
Caption.
Press the
button to highlight the Digital CC
Style selection. The default is Broadcast which
means the style is the same as the broadcast
channel has chosen for transmission.
Press the
button to select Custom.
The Custom page allows you to change the font
size and color, the background color, and the
transparency of the Closed Caption.
4.4.6 PIP Position
Press the
selection.
button to highlight the PIP Position
Press the button to select the position of the PIP
screen within the main screen.
4.4.7 Image Cleaner
Press the
selection.
button to highlight the Image Cleaner
Press the button to activate the function to clear
image ghosts. If a stationary image is left too long
on the screen it will be permanently burnt-in and
this function will not remove it. Press any key to
return to normal operation.
4.4.8 Reset All Settings
Press the
button to highlight the Reset All Settings selection.
Press the
button to reset the TV to the default factory settings.
Note: This does NOT reset the Parental Control Password.
Version 9/11/2006
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.5 TV Tuner Setup
When you first used your VP42 HDTV you will have setup your TV for regular (NTSC) TV channels using
the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV
TUNER SETUP menu.
4.5.1 Tuner Mode
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE ADJUST
page. Press the
button to display the TV
TUNER SETUP page for regular (NTSC) TV.
Press the
selection.
button to highlight the Tuner Mode
Press the
button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
4.5.2 Auto Search
Press the
button to highlight the Auto Search
selection.
Press the
button to Auto Search for TV channels
available. The TV will automatically search for analog
and digital channels.
If you wish to cancel the search for channels, press
and hold the MENU or OK button for a few seconds.
4.5.3 Skip Channel
After the TV has stored all of the available TV channels in memory you will find that some channels will
be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press the MENU and
buttons to open the TV TUNER SETUP menu and then
press the button to highlight SKIP CHANNEL. Press the OK button to select this channel to be
skipped when using the CH+ or CH- button. You will still be able to select this channel using the number
buttons on the remote control.
Version 9/11/2006
44
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.6 DTV Tuner Setup
When you first used your VP42 HDTV you will have setup your TV for DTV channels using the Initial
Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER
SETUP menu.
4.6.1 Tuner Mode
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE ADJUST
page. Press the
button to display the TV
TUNER SETUP page for DTV.
Press the
selection.
button to highlight the Tuner Mode
Press the
button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
4.6.2 Auto Search
Press the
button to highlight the Auto Search
selection.
Press the
button to Auto Search for TV channels
available. The TV will automatically search for analog
and digital channels.
If you wish to cancel the search for channels, press
and hold the MENU or OK button for a few seconds.
4.6.3 Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will
be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press the MENU and
buttons to open the TV TUNER SETUP menu and then
press the button to highlight SKIP CHANNEL. Press the button to select this channel to be skipped
when using the CH+ or CH- button. You will still be able to select this channel using the number buttons
on the remote control.
4.6.4 Digital Audio Out
When receiving digital audio from the DTV / TV Input, the audio is output on the Optical Digital Audio
connector of the rear of the TV. To configure the output for your Receiver/Amp, press the
highlight the Digital Audio Out selection.
button to
Press the
button to select Dolby Digital or PCM.
Version 9/11/2006
45
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.6.5 Time Zone
Setting the correct Time Zone for your area will
ensure that the correct program times are shown
after pressing the GUIDE button on the remote
control.
Press the
selection.
button to highlight the Auto Search
Press the
button to select your area.
4.6.6 Daylight Saving
As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times
are shown after pressing the GUIDE button on the remote control.
4.7 DTV / TV Input Parental Control
4.7.1 Parental Lock Enable
If you want to restrict certain channel and program
viewing, you can do this by turning on the Parental
Control. Selected programs, movies and channels
can then be made available only after an
authorized password has been entered and
accepted by the TV.
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE ADJUST
page.
Press the
button to display the
PARENTAL CONTROL page.
Press the
button to highlight the Parental Lock
Enable selection.
Press the
button to turn it on or off.
A panel will appear requesting that you input the password
before the TV will continue with your request. The default
password set in the factory is 0 0 0 0. If you are going to
use the Parental Control feature you should change the
password.
Note: Make sure you write down and store the new password in a secure place. The Reset All Settings
feature (see page 45) does NOT reset the password.
Version 9/11/2006
46
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.7.2 TV Rating
Follow the procedure in the previous section 4.7.1
to display the Parental Control menu and then
press the
selection.
button to highlight the TV Rating
button and the Block TV Rating panel
Press the
will be displayed.
In the Block TV Rating panel you can customize
the program blocking of the following TV ratings:
Y – All children
Y7 – Older children
G – General audience
PG – Guidance suggested
14 – Strongly cautioned
MA – Mature audience
You can also customize the TV ratings for the following
content:
FV – Fantasy violence
D – Sexual dialog
L – Adult language
S – Sexual situations
V - Violence
Press the
or
button to navigate through the TV rating options. Press the
button to block
(locked) or allow (unlocked).
4.7.3 Movie Rating
Press the
button to highlight the Movie Rating selection.
Press the
displayed.
button and the Block Movie Rating panel will be
In the Block Movie Rating panel you can customize the
program blocking of the following Movie ratings:
G – General audience
PG – Parental guidance suggested
PG-13 – Recommended for children 13 years of age or older
R – Mature audience
NC-17 – No one under 17 years of age
X – No one under 17 years of age
Press the
or
button to navigate through the Movie rating options. Press the
button to block
(locked) or allow (unlocked).
Version 9/11/2006
47
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.7.4 Blocked Unrated Programming
Follow the procedure in the previous section 4.7.1
to display the Parental Control menu and then
press the
button to highlight the Block Unrated
TV selection.
Press the
button to turn-on or turn-off the
blocking of programming that does not have a
rating.
4.7.5 Change the Password
Press the
button to highlight the Access Code Edit selection.
Press the
displayed.
button and the new Password panel will be
Enter the new, 4-digit password using the number buttons on
the remote. Enter it a second time to confirm you entered it
correctly.
Note: Make sure you write down and store the new password in a secure place. The Reset All Settings
feature (see page 45) does NOT reset the password.
Version 9/11/2006
48
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.8 Video Input Picture
Adjustment
The Picture Adjust menu operates in the same
way for Video Inputs (Component and AV) as for
the DTV / TV input in section 4.2. The menu
difference is that there is no icon along the top for
DTV / TV adjustments.
4.9 Video Input Audio Adjustment
The Audio Adjust menu operates in the same way
for Video Inputs (Component and AV) as for the
DTV / TV input in section 4.3.
The menu
difference is that there is no icon along the top for
DTV / TV adjustments.
4.10 Video Input Special Features
The Special Features menu operates in the same
way for Video Inputs (Component and AV) as for
the TV input in section 4.4. The menu difference
is that there is no icon along the top for TV
adjustments.
Version 9/11/2006
49
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.11 Video Input Parental Control
The Parental Control menu operates in the same
way for Video Inputs (Component and AV) as for
the DTV / TV input in section 4.7. The menu
difference is that there is no icon along the top for
DTV / TV adjustments.
4.12 PC Input Picture Adjustment
The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section
4.2 for Contrast, Brightness and Color Temperature.
4.12.1 Auto Adjust
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE ADJUST
page. Press the
Adjust selection.
button to highlight the Auto
Press the
button for the Plasma HDTV to adjust
to the PC signal timing automatically.
4.12.2 H-SIZE
Press the
selection.
button to highlight the H-Size
Press the button to start adjusting the horizontal
size of the picture. Use the
adjust the horizontal size.
or
button to
4.12.3 Horizontal Shift
Press the
button to highlight the Horizontal Shift selection.
Press the
button to start adjusting the horizontal position of the picture. Use the
or
button to
adjust the horizontal position.
4.12.4 Vertical Shift
Press the
button to highlight the Vertical Shift selection.
Press the button to start adjusting the vertical position of the picture. Use the
the vertical position.
or
button to adjust
4.12.5 Fine Tune
Press the
button to highlight the Fine Tune selection.
Press the button to start tuning the to the PC signal. Use the
or
button to adjust the tuning.
Version 9/11/2006
50
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.13 PC Input Audio Adjustment
The Audio Adjust menu operates in the same way
for the PC Input as for the DTV / TV input in
section 4.3. The menu difference is that there are
no icons along the top for DTV / TV and Parental
Control adjustments.
4.14 PC Input Special
Features
The Special Features menu operates in the same
way for the PC Input as for the DTV / TV input in
section 4.4. The menu difference is that there is
no icon along the top for TV adjustments and no
Closed Caption.
Version 9/11/2006
51
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.14.1 Understanding Viewing Features
Your Plasma HDTV features four viewing modes and Picture-In-Picture (PIP)/Picture-by-Picture (POP)
mode. You can switch viewing modes using the remote control.
4.14.2 Viewing Modes
Normal Mode
The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are
added to the left and right of the display image. Standard TV broadcasts are
displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred
to as pan-and-scan or full frame. These movies were originally filmed in 16:9
(widescreen), and then modified to fit a traditional TV screen (4:3).
Wide Mode
When watching a standard broadcast or full-frame movie in this mode,
the display image is stretched proportionately to fill the TV screen.
When watching a widescreen (1.78:1 source) program or movie, the
display image fills the TV screen. If you are watching a widescreen
(1.85:1 or 2.35:1 source) program or movie, there will still be black
bars at the top and bottom.
Zoom Mode
When watching a widescreen (1.78:1, 1.85:1, or 2.35:1 source)
program or movie, the display image is zoomed proportionally to fill the
width of the screen. The top and bottom are cut off to remove most of
the source material’s black bars. This mode is good for programs or
movies with sub-titles.
Panoramic Mode
When watching a standard broadcast or full frame movie in this mode,
the 4:3 Aspect Ratio (1.33:1 source) display image is stretched
horizontally on the left and right sides to fill the TV screen. The center
of the image is not stretched.
Note: Viewing modes are saved based on input. For example, you lasted watched a DVD in widescreen
mode and then watched TV in standard mode. When you switch back to DVD input, the viewing mode
will return to widescreen.
Version 9/11/2006
52
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.14.3 Picture-In-Picture(PIP)/Picture-by-Picture(POP)Mode
Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you
can display two pictures at one time. One picture is displayed as the full screen (main screen) and the
other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or
large.
See below for detailed information regarding the PIP sources.
SUB
Component Component
TV
AV1
AV2
HDMI 1
HDMI 2
RGB
1
2
MAIN
TV
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
AV1
AV2
Component 1
Component 2
HDMI 1
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
HDMI 2
9
RGB
9
“9” – Indicates which inputs are available for PIP and POP modes.
*When HDMI is used for the Sub-Screen it cannot support 1080i.
4.14.4 Adjusting Basic PIP/POP Settings
The PIP channel is independent of the main TV
channel. To change the PIP channel, press the PIP
CH + or - button on the remote control.
Repeated pressing of the PIP button will cycle through
PIP, POP and Off.
Repeated pressing of the PIP INPUT button will cycle
through the inputs for PIP. This button has no effect
when PIP is off.
Press the PIP SIZE button to alternate between Small,
Medium and Large PIP sizes.
You can swap the program that is in the main picture
with the program in the PIP sub-picture. To swap the main picture program with the PIP sub-picture
program, press SWAP on the remote control. If you press SWAP again, it will return the program to the
main picture. This works the same if you are in the Picture-by-Picture (POP) mode.
Version 9/11/2006
53
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.14.5 Setting the Sleep Timer
The Sleep Timer lets you set a time delay to turn off the Plasma HDTV automatically.
To set the Sleep Timer using the remote control:
1.
2.
Press the SLEEP button on the remote control. The Sleep Timer appears in the center of
you screen.
Press the SLEEP button one or more times to select the time you want. The choices are 30,
60, 90 or 120 minutes.
To turn off the sleep time using the remote control, press the SLEEP button repeatedly until Off appears
on the screen.
Version 9/11/2006
54
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.15 Programming the VIZIO Universal Remote Control
You can program the remote control to work with up to four different components. Listed below are the
steps for programming your VCR, Cable Box and DVD Player.
4.15.1 Programming for VCR
1. Manually turn on the VCR.
2. Press the VCR button on the remote control.
3. Press and hold the SETUP button until the LED LIGHT flashes twice.
4. Find the programming code for your VCR in the code list in the back of this book and enter it using
the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the VCR and press the POWER button. The VCR will turn off.
Note:
a)
b)
If your VCR does not respond, try all the codes for your VCR brand. If the codes do not
work, or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
4.15.2 Programming for Cable Set-Top Box
1. Manually turn on the Cable Box.
2. Press the CBL button on the remote control.
3. Press and hold the SETUP button until the LED LIGHT flashes twice.
4. Find the programming code for your Cable Box in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
5. Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
Note:
a)
b)
If your Cable Set-Top Box does not respond, try all the codes for your brand. If the codes
do not work, or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
Version 9/11/2006
55
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
4.15.3 Programming for DVD Player
1. Manually turn on the DVD Player.
2. Press the DVD button on the remote control.
3. Press and hold the SETUP button until the LED LIGHT flashes twice.
4. Find the programming code for your DVD player in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
5. Point the remote control at the DVD Player and press the POWER button. The DVD Player will turn
off.
Note:
a)
If your DVD player does not respond, try all the codes for your brand. If the codes do not
work, or your brand is not listed, see “Searching for Component Codes.”
b)
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
4.15.4 Searching for Component Codes
If you cannot find the manufacturer in the component list or the program code does not work, you can use
the remote control to search for the correct component code.
To search for a component code:
1.
2.
3.
4.
5.
Turn on the component.
Press the matching component button on the remote control.
Press and hold the SETUP button until the LED flashes twice.
Press 9 9 1. The LED flashes twice.
Point the remote control at the component and then alternate between pressing the POWER
button and the component button on the remote control until the component turns off.
If the component still does not respond, clear the component button, then repeat the search
procedure.
4.16 Using a Cable or Satellite Remote
Your VIZIO remote uses codes 11758 and 10178 to work your Plasma HDTV. To use a cable or satellite
remote to work the Plasma HDTV, refer to your cable or satellite remote user guide for more information
on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most Direct TV
units), first try 11758 and then, if that does not work, 10178. If your cable or satellite remote uses a 4-
digit code, try 1758 and then 0178 as an alternative. If your cable or satellite remote uses a 3-digit code
(Echostar or Dish Network for example), use code 627.
Note: Some buttons may not function as expected on your cable or satellite remote. Typically power,
volume and mute will work.
Version 9/11/2006
56
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Chapter 5 Maintenance and Troubleshooting
5.1 Maintenance
Important
1.
2.
Make sure that the power cable is removed from the socket before cleaning the TV.
Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such
chemicals may damage the housing, screen glass and remote control, and cause paint to
peel.
Cleaning the Housing and Remote Control
1.
2.
Use the VIZIO soft cloth (included) for cleaning.
If the housing or remote control is seriously contaminated, use a soft cloth moistened with
diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to
prevent water from penetrating into the housing. Wipe the display with a dry cloth after
cleaning.
Cleaning the Screen
1.
2.
Use the VIZIO soft cotton cloth (included) to gently clean the screen.
The screen glass is very fragile. Do not scrape it with any sharp object. Do not press or tap
the screen to avoid cracking. When the screen is seriously contaminated, use a soft cloth
moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth
before cleaning to prevent water from penetrating into the housing. Wipe the display with a
dry cloth after cleaning.
5.2 Troubleshooting Guide
If the TV fails or the performance changes dramatically, check the display in accordance with the
following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the
display still fails to perform as expected, contact the VIZIO for assistance by calling 1-714-668-0588 or e-
Problem
Solution
No power.
Make sure the power button is ON (Green LED).
Make sure AC power cord is securely connected to the AC socket.
Plug another electrical device (like a radio) to the power outlet to verify that the
outlet is supplying the proper voltage.
No sound.
Check your audio connection
Press MUTE on the remote control again, so that MUTE disappears from the screen
Check your audio settings, your TV audio may be set to SAP, min or speakers off
Press the Volume + (Up) key on your remote control
Make sure that headphones are not connected
If the screen is black.
Version 9/11/2006
Check your input connections.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Problem
Solution
Power is ON but no screen Make sure the video cable supplied with the TV is secured to the correct video
image.
output port on the back of the VCR and the TV. Make any cable you have attached
to the TV is secured to the correct output your Set-Top Box, DVD, etc.
Adjust brightness and contrast.
Check Source settings.
Wrong or abnormal colors If any colors (red, green, or blue) are missing, check the video cable to make sure it
appear.
is securely connected.
Control buttons do not work.
Press only one button at a time.
Remote Control does not Make sure batteries are inserted correctly
work.
Batteries could be weak.
Make sure you have selected TV on the remote.
There appears to be image For best image quality, view HD wide screen programs where possible. If HD
quality issues.
content is not available view “Standard Definition” from a digital source. Standard,
analog TV will always be noticeably inferior to HD because your digital flat panel TV
has video that is many times better than old TV’s and so you can see interference
and deficiencies you did not know you had.
You cannot see a picture.
Make sure that the power cord is plugged into a grounded electrical outlet.
Make sure that the power button is turned on.
Make sure that the selected input source is connected to a working input source.
If your TV is connected to your computer in RGB or HDMI mode, press any key on
your keyboard to “wake” your computer.
You see a distorted picture or You may be getting interference from electrical appliances, cars, motorcycles, or
hear unusual sound.
fluorescent lights. If you have not mounted it on the wall, try moving your TV to
another location to see if this is the cause of the problem.
The picture has abnormal Make sure that the input source cable is attached securely and correctly to the back
patterns.
of your TV.
Make sure that the video input source is within the range of your TV. Compare the
video input source’s specifications with your TV specifications.
The display image does not If you are using RGB mode, make sure that H Size and V Position in the On Screen
cover the entire screen.
Display (OSD) are set correctly.
If you are using TV, AV1, AV2 or Component with 480i input, use the WIDE button
on the remote control to scroll through various screen modes.
You can see a picture but you Make sure that the volume is not turned down.
cannot hear sound.
Make sure that the sound is not muted.
Make sure that your audio input source cables are connected securely and correctly.
The TV has pixels that are Your Plasma HDTV is manufactured using an extremely high level of precision
always dark or colored.
technology, however, sometimes some pixels of your Plasma HDTV may not
display. Pixel defects within industry specifications are inherent to this type of
product and do not constitute a defective product.
You see “noise” or “trash” on When your Plasma HDTV’s digital capabilities exceed a digital broadcast signal, the
the screen.
signal is up-converted (increased) to match your TV’s display capabilities. Up-
converting can cause noise or trash.
You switch to a different input The TV remembers the volume level from the last time you adjusted it. If the sound
and the volume changes. level is higher or lower from another source, then the loudness will change.
You switch to a different input The TV remembers the viewing mode from the last time you used a particular input
and the screen size changes.
(AV1, AV2, Component 1, Component 2, HDMI 1, HDMI 2 and TV).
Version 9/11/2006
58
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Tips for High-Definition Users.
The Plasma HDTV is an ideal platform for viewing High Definition Content.
Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB.
However, due to variances in broadcast practices, it is possible some image
distortions can occur.
Tips for Letterbox Content Users.
Letterboxed (or “Widescreen”) versions of DVD movies are most commonly
formatted for standard 4:3 Televisions. The Plasma HDTV has the capability of
expanding this content so the entire screen is filled at the expense of image
accuracy. To use this function, press the “ZOOM” key on the remote control
and cycle among the available options.
5.3 Telephone & Technical Support
Products are often returned due to a technical problem rather than a defective product that may result in
unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem
over the phone. For more information on warranty service or repair, after the warranty period, please
contact our Support Department at the number below.
Customer support and quality service are integral parts of VIZIO’s commitment to service excellence.
For technical assistance contact our VIZIO Technical Support Department via email or phone.
E-mail: techsupport@vinc.com
Tel: (714)668-0588
Hours of operations:
6:00am – 6:00pm PST Monday – Friday
10:00am – 2:00pm PST Saturday – Sunday
Please have your VIZIO model number, serial number and date of purchase available before you call.
VIZIO
320A Kalmus Drive
Costa Mesa, CA 92626
Tel: (714) 668.0588 Fax: (714) 668-9099
Web: www.VIZIOCE.com
Version 9/11/2006
59
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
5.4 Compliance
Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for
each area.
USA
UL
Canada
Germany
UK
CSA
VDE
BASE/BS
Japan
Electric Appliance Control Act
5.5 FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.
2.
3.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.
Consult the dealer or an experienced radio/TV technician for help.
Notice:
1.
The changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
2.
3.
Shielded interface cables and AC power cord, if any, must be used in order to comply with
the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such
interference.
Version 9/11/2006
60
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Chapter 6 Miscellaneous Information
6.1 Specifications
Specifications
Panel
41.65” Diagonal, 16:9 Aspect Ratio
Resolution
Pixel (Dot) Pitch
1024 x 768 pixels
0.9mm (H) x 0.676mm (V)
Display Compatibility HDTV (720P)
Signal Compatibility
Colors
480i (SDTV), 480P (EDTV), 720P (HDTV), 1080i (HDTV)
231 Billion
Brightness
Contrast
480 cd/m2 (typical) with film filter on panel
10,000:1 (max)
Viewing Angle
Inputs
>170° (horizontal and vertical)
1x Co-axial RF (ATSC/QAM/NTSC), 2x HDMI™** with HDCP (1 with Stereo Audio RCA), 2x
Component YPbPr plus Stereo Audio, 1x RGB PC plus Stereo Audio, 1x S-Video plus Stereo
Audio (shared in AV2), 2x Composite Video plus Stereo Audio (AV1 & AV2)
Outputs
1x 5.1 Audio from DTV input only (SPDIF Optical), 1x Stereo Audio (RCA)
Features
Single Scan Technology for Higher Contrast, Reduced Solarisation and Reduced False
Contouring, PIP, POP, Noise Reduction, CC, V-Chip, 3D Comb Filter, Zoom, Freeze, Motion
Adaptive De-Interlace, Picture Enhancement, MPEG-2 Decoding via DTV input, NTSC Video
decoding via Video (AV, S-Video or Component), Progressive Scan Video via HDMI™**,
Component or RGB, HDTV via HDMI™**, Component or RGB (Set-Top Box required),
Computer 640x480, 800x600, 1024x768, 1280x1024 via RGB, Sound Enhancement
Speakers
Built-in, 10W x 2
Panel Life
Power
60,000 hours to half the original brightness
Input
IEC Connector for direct power line connection
110 ~ 240Vac at 50/60Hz
Voltage Range
Power Consumption
380W Max (320W average)
Environmental Conditions
Operating
Temperature: 5°C~35°C, Relative Humidity: 20~80%, Altitude: 0~6,560 ft
Non-Operating
Dimensions
Net Weight
Temperature: -20°C~50°C, Relative Humidity: 10~90%, Altitude: 0~9,840 ft
42.25” W x 29.84” H x 11.4” D with stand; 42.25” W x 28.8” H x 4.3” D without stand
73 lbs with stand; 63 lbs without stand
89.3 lbs
Gross Weight
Certifications
CSA, FCC Class B
*Product specifications may change without notice or obligation.
Version 9/11/2006
61
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
6.2 Glossary – Standard Definitions
Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound.
Aspect Ratio (4x3): Traditional TV “aspect ratio”, that is, the screen’s width as compared to its height.
For example, a “32 inch TV screen” would be 25 inches wide and 19 inches tall.
Aspect Ratio (16x9): “Wide screen TV” aspect ratio which is more like a movie screen than a traditional
TV. For example, a “32 inch TV screen” would be 28 inches wide and 16 inches tall.
Digital TV (DTV): Television delivered and displayed using radio frequency waves that contain
information that is digitally encoded for improved quality and efficiency.
Enhanced Definition TV (EDTV): A better digital television transmission than SDTV with at least 480P,
in a 16x9 or 4x3 display and Dolby digital surround sound. 480P is the quality used by most DVD players.
EDTV provides 300-400,000 pixels.
HDTV Monitor (sometimes called HDTV Ready): A set that can display HDTV programming if you have
a separate HDTV tuner, HD Cable Set-Top Box or HD Satellite Set-Top-Box Receiver.
HDTV Tuner (also decoder, receiver, set-top box): A device capable of receiving and outputting HDTV
signals for display. It may be stand-alone or integrated in the set.
High-Definition Television (HDTV): The best quality picture, wide screen (16x9) display with at least
720 progressively scanned lines (720P) or 1080 interlaced lines (1080i) and Dolby digital surround sound.
HDTV provides 900,000-2.1 million pixels.
Integrated HDTV: An HDTV that has the digital tuner built into the set. It does not need a separate set-
top box to receive over-the-air DTV signals.
Interlace Scan: A way to scan vertical lines onto a TV picture by scanning all the odd lines first, then
filling the in the even lines (this happens instantaneously).
Plug-and-Play or Digital Cable Ready: A DTV or other device for digital cable consumers that plugs
directly into the cable jack and does not require a separate set-top box. Plug-and-Play TV owners must
obtain a CableCARD from their cable company in order to view scrambled programming services.
Progressive Scan: A way to scan vertical lines onto a TV picture by scanning all the lines consecutively
(progressively).
Standard Definition TV (SDTV): Basic digital television transmission that may be displayed with fewer
than 480 progressively scanned lines (480P) in 16 x 9 or 4 x 3 format. 480 interlaced (480i) is the quality
of today’s analog TV system.
Source: Buying a Digital Television, CEA, HDTV Guide, 2005
Note: The Federal Communications Commission (FCC), the Consumer Electronics Association (CEA)
and the Consumer Electronics Retailers Coalition (CERC) have made a new tip sheet available for digital
television (DTV) retailers to reproduce and distribute to consumers on the sales floor. The file may be
downloaded online at www.dtv.gov. While you’re there, check out the other useful information in the FCC
is making available to consumers interested in learning more about the analog to digital transition.
Version 9/11/2006
62
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
6.3 Index
Accessories, 5
Extended Warranty, 66
Adjustments
Glossary, 62
Closed Caption, 13
Selecting the Screen Size, 13, 32, 52, 62
Stepping through TV Channels, 32
Volume, 9, 32, 57
Cleaning your VIZIO TV, 57
Co-axial RF
HDMI
Connecting your DVD Player, 17
Connecting your Set-Top Box, 22
Inputs
Antenna, 3
Connectors, 16
Connecting for DTV, 26
Connecting for TV, 27
Component
Rear Label, 10
Rear Label, 11
Installation
Connecting your DVD Player, 19
Connecting your Set-Top Box, 24
Composite (AV)
Connecting your DVD Player, 20, 21
Connecting your VCR, 25
Connecting your Video Camera, 25
Controls
Front Panel, 9
Side Panel, 9
DTV
Base removal, 6
Preparation, 5
Safety Instructions, 2
Wall Mounting, 5, 6, 30
OSD
Brightness Adjustment, 61
Closed Caption Selection, 13
Color Adjustment, 16
Contrast Adjustment, 61
Image Cleaner, 43
Audio Adjustment, 41
Parental Control, 46
Picture Adjustment, 39
Special Features, 42
Tuner Setup, 45
Outputs
Using 5.1 Surround with a Home Theatre System, 28
Using an external Receiver/Amp, 28
Parental Control
Block Unrated Programming, 48
Movie Rating, 47
Parental Lock Enable, 46
Password change, 48
TV Rating, 47
DTV Audio Adjust
Balance, 41
Bass, 41
Simulated Surround Sound, 42
Speakers On/Off, 42
Treble, 41
PC Input
Audio Adjustment, 51
Picture Adjustment, 50
Special Features, 51
PC Picture Adjust
Volume, 41
DTV Picture Adjust
Brightness, 39
Color, 39
Auto Adjust, 50
Color Temperature, 40
Contrast, 39
Picture Mode, 39
Fine Tune, 50
Horizontal Position, 50
Horizontal Size, 50
Sharpness, 40
Tint, 40
DTV Special Features
Closed Caption, 42
Closed Caption Style, 43
Image Clean, 43
Vertical Position, 50
PIP and POP Inputs, 53
Remote
Batteries, 15
Layout, 12, 15, 55
Range, 15
Language, 42
Remote Control
PIP Position, 43
Reset, 43
Sleep Timer, 42
Codes for other devices., 67
Programming to work your DVD Player, 56
Programming to work your Set-Top Box, 55
Programming to work your VCR, 55
Setting the Sleep Timer, 54
Using your Cable or Satellite Remote to Operate your
VIZIO TV, 56
DTV Tuner Setup
Auto Search, 45
Daylight Saving, 46
Digital Audio Out, 45
Skip Channel, 45
RGB
Time Zone, 46
Tuner Mode, 45
DVI
Connecting your PC, 29
Screen Size explanation, 52
S-Video
Connecting your DVD Player, 18
Connecting your Set-Top Box, 23
Connecting your DVD Player, 20, 21
Technical Specifications, 61
Version 9/11/2006
63
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Troubleshooting Guide, 57
TV
Image Clean, 43
Language, 42
Audio Adjustment, 41
Parental Control, 46
Picture Adjustment, 39
Special Features, 42
Tuner Setup, 44
TV Audio Adjust
Balance, 41
PIP Position, 43
Reset, 43
Sleep Timer, 42
TV Tuner Setup
Auto Search, 44
Skip Channel, 44
Tuner Mode, 44
Video Input
Bass, 41
Simulated Surround Sound, 42
Speakers On/Off, 42
Treble, 41
Audio Adjustment, 49
Parental Control, 50
Picture Adjustment, 49
Special Features, 49
Warranty, 66
Volume, 41
TV Picture Adjust
Brightness, 39
Watching TV
Color, 39
Color Temperature, 40
Contrast, 39
Basic Adjustments, 32
Basic connections, 30
First Startup, 30
Picture Mode, 39
Tint, 40
TV Special Features
Closed Caption, 42
Getting your Programs, 32
Program Information, 33
Status Information, 34
Version 9/11/2006
64
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
6.4 Limited Product Warranty
Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor and is only valid when
purchased from an Authorized Reseller, only on new and non-refurbished product, and available to customers in the Continental US,
Alaska, Hawaii and Puerto Rico. See below for the VIZIO Extended Service warranty.
VIZIO’s Responsibility
VIZIO Displays purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one
(1) year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the monitor using
new or refurbished parts.
Service Labor
During a period of one (1) year from the effective warranty date, VIZIO will provide, when needed, service labor to repair a
manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States, you must first call our
Customer Support at (714) 668-0588. The determination of service will be made by VIZIO Customer Support. PLEASE DO NOT
RETURN YOUR UNIT TO VIZIO WITHOUT PRIOR AUTHORIZATION.
Parts
New or remanufactured replacements for defective parts will be used for repairs by VIZIO at its designated Service Center for one
(1) year from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty
period.
Service
During the one (1) year warranty period, VIZIO will, at its option and sole discretion, repair or replace defective parts, including
replacement of the entire Panel. The Customer will be required to ship the unit to the Service Center indicated at the time
Customer Support is contacted to make the necessary repairs, you are responsible for all transportation charges to and from the
service facility. VIZIO is not responsible for the de-installation or re-installation of the unit.
Packaging and Shipping Instruction
When you send the product to an authorized VIZIO service facility you must use the original carton box and packing material or an
equivalent as designated by VIZIO
Not Covered
This warranty does not cover defects, malfunctions or failures resulting from shipping or transit accidents, abuse, misuse, operation
contrary to furnished instructions, operation on incorrect power supplies, operation with faulty associated equipment, modification,
alteration, improper servicing, tampering or normal wear and tear or TVs on which the serial number has been removed or defaced.
Image Sticking caused by operating at excessive brightness levels for extended periods or mishandling are not covered by this
warranty.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY
FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING OUR
NEGLIGENCE, ALLEGED DAMAGE OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT,
SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE FOR LOSS OF
USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only warranty
applicable; no one is authorized to extend or modify it or to grant any other warranty.
VIZIO retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim
that is not covered by the warranty, you will be contacted to determine whether VIZIO should repair the damage for a fee or whether
the product should be returned to you as received by the repair center.
Owner’s Responsibility
Effective Warranty Date
Warranty begins on the date of sale to the end user. To ensure warranty service, keep the dated bill or sale receipt as evidence of
the purchase date.
Warranty Service
For warranty service information, contact VIZIO Customer Support at (714) 668-0588, 7:30 am to 5:30 pm PST or visit
is at the owner’s expense. You must provide the model, serial number and date of purchase. Before you ask for warranty service,
read your User Manual. You might avoid a service call.
Warranty conditions are subject to change, for latest Warranty Terms and Conditions and additional information regarding your
6.4.1 VIZIO Extended Service Warranty
Protect your investment beyond the standard warranty and experience piece of mind with VIZIO’s Extended Service Warranty.
Depending on your model, plans are offered for 2-5 years. Visit www.vizioce.com or call 1-800-988-4196 to purchase a plan today.
Version 9/11/2006
65
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
6.5 Component Program Codes
Setup Code for VCR’s
Setup Code for VCR’s
Setup Code for VCR’s
ABS
21972
Emerson
20035, 20037,
Marantz
20035, 20081
20037
20184, 20240,
20045, 20121,
20043, 20209,
20002, 20278,
20479
Admiral
20048, 20209
20278
Marta
Aiko
Matsushita
Media Center PC
MEI
20035, 20162
21972
Aiwa
20037, 20479
21972
Fisher
Fuji
20047, 20104
20035, 20033
20045
Alienware
America Action
American High
Amoisonic
Anam
20035
20278
Memorex
20035, 20162,
20037, 20048,
20039, 20047,
20240, 20104,
20209, 20479
Fujitsu
Gateway
GE
20035
21972
20479
20060, 20035,
20240
20162, 20037,
20240, 20278
MGA
20240, 20043
20240
MGN Technology
Microsoft
Mind
General
Go Video
GoldStar
20045
20432
Anam National
Asha
20162
21972
20240
21972
20037, 20209,
20038, 20225
Audiovox
20037, 20278
20240
Minolta
20042
Beaumark
Bell & Howell
Broksonic
Haojie
20240
Mitsubishi
Motorola
MTC
20067, 20043
20035, 20048
20240
20104
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
20081, 20038
20072
20184, 20121,
20209, 20002,
20479
21972
Multitech
NEC
20072
Calix
20037
20047
20035, 20037,
20048, 20104,
20067, 20038
Canon
Carver
CCE
20035
Hitachi
20037, 20042,
20055
20081
Newave
Nikko
20037
20037
20240
21972
20035
Howard Computers
HP
21972
20072, 20278
20048, 20081
20037, 20278
20072
21972
Changhong
Citizen
Colt
Noblex
Hughes Network
Systems
20042, 20739
Northgate
Olympus
Optimus
iBUYPOWER
JVC
21972
Craig
20037, 20047,
20240, 20072
20045, 20067
20037, 20278
20067, 20038
20072
21062, 20162,
20037, 20048,
20104, 20432
KEC
Curtis Mathes
20060, 20035,
20162
Kenwood
KLH
Orion
20184, 20209,
20002, 20479
Cybernex
CyberPower
Daewoo
20240
21972
Kodak
Kolin
20035, 20037
20043
Panasonic
21062, 20035,
20162, 20616,
20225
20045, 20104,
20278
LG
20037, 20045,
20042, 20209,
20038
Penney
20035, 20037,
20240, 20042,
20038
Dell
21972
Denon
20042
Logik
20072
20037
DirecTV
20739
Pentax
Philco
Philips
20042
LXI
Durabrand
Electrohome
Electrophonic
Emerex
20039, 20038
20037
20035, 20479
Magnavox
20035, 20039,
20081
20035, 20081,
20739, 20618
20037
Magnin
20240
Pilot
20037
20032
Version 9/11/2006
66
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Setup Code for VCR’s
Setup Code for VCR’s
Setup Code for Cable
Converters
Pioneer
Polk Audio
Profitronic
Proscan
Protec
20042, 20067
Tatung
Technics
Teco
20045, 20067
Daeryung
01877, 00877,
00477, 00008
20081
20035, 20162
20240
20035, 20037,
20048, 20038
Digi
00637
00476
00637
00476
20060
Director
Dumont
Gehua
Teknika
Tivo
20035, 20037
20072
20636, 20618,
21503, 20739
Pulsar
20039
Qisheng
Quasar
Radix
20060
TMK
20240
General
Instrument
00476, 00810,
00276, 00003,
00014
20035, 20162
20037
Toshiba
20045, 20042,
20067, 20043,
21503, 21008,
21972
GoldStar
Hamlin
Hitachi
Jerrold
00144
Randex
RCA
20037
00009, 00273
00014
Totevision
Touch
20037, 20240
21972
20060, 20035,
20240, 20042,
20880
00476, 00810,
00276, 00003,
00012, 00014
Unitech
20240
Realistic
20035, 20037,
20048, 20047,
20104
Vector
20045
KNC
00008
00144
00000
Vector Research
Victor
20038
ReplayTV
Runco
20616
LG
20067
20039
Memorex
Motorola
Video Concepts
Videomagic
Videosonic
Viewsonic
Wards
20045
Sampo
20037, 20048
00476, 00810,
00276, 01254,
01376
20037
Samsung
20240, 20045,
20432
20240
MultiVision
Pace
00012
Sanky
Sansui
20048, 20039
21972
01877, 00237
20067, 20209,
20479
20060, 20035,
20048, 20047,
20081, 20240,
20042, 20072
Panasonic
00000, 00008,
00107
Sanyo
Scott
20047, 20240,
20104
Panther
Paragon
Philips
00637
White
Westinghouse
20209, 20072
20184, 20045,
20121, 20043
00000
XR-1000
Yamaha
Zenith
20035, 20072
20038
00317, 01305
Sears
20035, 20037,
20047, 20042,
20104
Pioneer
01877, 00877,
00144, 00533
20039, 20033,
20209, 20479
Sharp
20048, 20209
20072
Pulsar
00000
Shintom
Shogun
Singer
ZT Group
21972
Quasar
00000
20240
RadioShack
Regal
00883
20072
00279, 00273
00000
Setup Code for Cable
Converters
Sonic Blue
Sony
20616
Runco
20035, 20032,
20033, 20636,
21972
ABC
00003, 00008,
Samsung
Scientific Atlanta
00000, 00144
00014
00899
00014
00899
00883
00883
00883
01877, 00877,
00477, 00008
Americast
Bell & Howell
Bell South
Clearmaster
ClearMax
STS
20042
Sony
01006
Sylvania
20035, 20081,
20043
Starcom
Supercable
Supermax
Tocom
00003, 00014
00276
Systemax
21972
21972
20037
00883
Tagar Systems
Tashiko
Coolmax
00012
Version 9/11/2006
67
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Setup Code for Cable
Converters
Setup Code for Satellite
Receivers
Setup Code for DVD Players
20796, 21056,
21937, 20794,
21020, 21915
Torx
00003
00000
00276
00883
00003
00883
00883
00883
00883
JVC
00775
Toshiba
Trans PX
Tristar
TS
LG
01414, 01226
00724, 00722
00724
Blaupunkt
Blue Parade
Broksonic
Changhong
CineVision
Coby
20717
Magnavox
Memorex
Mitsubishi
Motorola
NEC
20571
20695
00749
20627, 21061
20869
V2
00869
Viewmaster
Vision
01270
21086
Next Level
Panasonic
Paysat
00869
Curtis Mathes
CyberHome
21087
Vortex View
Zenith
00247, 00701
00724
21024, 21023,
21129, 20816,
21117
00000, 00525,
00899
Philips
01142, 00749,
01749, 00724,
01076, 00722,
00099, 01442
Daewoo
20833, 21172,
20869
Setup Code for Satellite
Receivers
Denon
20490
Proscan
Proton
00392, 00566
01535
DVD2000
Emerson
Enterprise
Fisher
20521
AlphaStar
Chaparral
Crossdigital
DirecTV
00772
00216
01109
20591, 20675
20591
RadioShack
RCA
00869
00392, 00566,
00855, 00143,
01392
21919
00392, 00566,
00639, 01142,
00247, 00749,
01749, 00724,
00819, 01856,
01076, 01109,
00099, 01392,
01640, 01442,
01414, 01108
Funai
20675
Samsung
01276, 01109,
01108
Gateway
GE
21158, 21073
20522, 20717
Sanyo
SKY
01219
Go Video
20744, 20833,
21099, 20783,
21075, 20869,
21730
00856
Sony
00639, 01640
00869
Dish Network
System
01005, 00775,
01505
Star Choice
Tivo
Greenhill
20717
01142, 01442
Harman/Kardon
Hitachi
20582, 20702
Dishpro
01005, 00775,
01505
Toshiba
00749, 01749,
00790, 01285
20573, 20664,
21919
Echostar
01005, 00775,
01505
UltimateTV
Uniden
01640, 01392
00724, 00722
01535
Hiteker
Initial
Integra
JBL
20672
Expressvu
GE
00775
00566
00869
20717
US Digital
USDTV
Voom
20627, 21924
20702
General
01535
Instrument
00869
JVC
20558, 20623,
20867
GOI
00775
01246
01535
Zenith
00856, 01856
Goodmans
Hisense
Hitachi
Kenwood
KLH
20490, 20534
20717, 21020,
21149
Setup Code for DVD Players
00819, 00222,
01250
Aiwa
20641, 21912
20770
Koss
Lasonic
LG
20651, 21980
20798
HTS
00775
Akai
Hughes Network
Systems
01142, 00749,
01749, 01442
Allegro
Apex Digital
20869
20591, 20869,
20801
20672, 20717,
20797, 21061,
I-Lo
01535
Liquid Video
21980
Version 9/11/2006
68
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Setup Code for DVD Players
Setup Code for DVD Players
Setup Code for CD Players
Lite-On
21158, 21058
20511
SVA
20717
20675
20675
Miro
30000
Loewe
Sylvania
Symphonic
Teac
Mission
MTC
30157
Magnavox
20503, 20539,
21976, 21914,
20675
30420
20717, 21984,
20809
NSM
30157
Onkyo
Optimus
30868, 30101
Marantz
Memorex
Microsoft
Mintek
20539
Technics
Theta Digital
Toshiba
20490
31063, 30000,
30032, 30037,
30420, 30179,
31075, 30145
20695
20571
20522
20503, 20695
20123, 20124
20503
20717
V, Inc.
Panasonic
Parasound
Philips
30029
Mitsubishi
Nesa
21521, 20521
20717
Urban Concepts
Xbox
30420
20522
30626, 30157
Norcent
Onkyo
21003
Yamaha
20490, 20539,
20545
Pioneer
31063, 31062,
30032
20503, 20627,
21924, 20792
Zenith
20503, 20591,
20869
Polk Audio
Proton
30157
30157
30157
30157
30029
31075
Oritron
20651, 21980
Panasonic
20490, 21762,
21990
QED
Setup Code for CD Players
Philips
20503, 20539,
20646, 21914
Quad
Aiwa
30157
30420
30029
Quasar
RadioShack
RCA
Pioneer
Polaroid
Polk Audio
Portland
Proscan
Qwestar
RCA
20525, 20571
21086, 21061
20539
Burmester
California Audio
Labs
31062, 30032,
30420, 30179,
30053
Carver
30157, 30179
30873
20770
Realistic
Rotel
30420, 30179
30157, 30420
30157
Denon
20522
DKK
30000
20651
SAE
DMX Electronics
Dynamic Bass
Fisher
30157
20522, 20571,
20717, 20822
Sansui
Sanyo
30157
30179
Rio
20869
30179
30179
Rotel
20623
SAST
30157
Garrard
30420
Sampo
Samsung
20752, 20698
Sharp
30861, 30037
30888, 30036
30157
Genexxa
Harman/Kardon
Hitachi
30032
20490, 20573,
21932, 21075,
20820
Silsonic
Sonic Frontiers
Sony
30157, 30173
30032
30490, 30000,
30100
Integra
30101
Sansui
20695
JVC
30072
Sanyo
20695
Soundesign
TAG McLaren
Tascam
Teac
30145
Kenwood
30826, 30626,
30028, 30037,
30036, 30190
Sharp
20630, 20752
21117
30157
Sharper Image
Sherwood
Shinco
30420
20770
Krell
30157
30157
30157
30420
20717
Linn
Technics
Victor
30029
Shinsonic
Sonic Blue
Sony
20533
Magnavox
Marantz
30072
20869, 21099
30626, 30029,
30157
Wards
30157, 30053
30888, 30036
20533, 20864,
21033, 21904,
21903
Yamaha
MCS
30029
Version 9/11/2006
69
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Setup Code for CD Players
Setup Code for Audio
Amp/Tuners
Setup Code for TV’s
Zonda
30157
Advent
Aiko
10761, 10842
10092
JVC
30074, 31263
Kenwood
31313, 31570,
30027
Aiwa
Akai
11914
Setup Code for Audio
Amplifiers
10812, 10702,
10030, 10672,
11903
KLH
31428
Bose
30674
30078
30331
30321
30321
30264
30395
30395
30321
30264
30689
30078
30331
30078
30354, 30133
Magnavox
31189, 31269,
30531
GE
Albatron
10700, 10843
10180
Marantz
31189, 31269,
30039
JVC
America Action
Anam
Marantz
Nakamichi
NEC
10250, 10180,
10700
MCS
30039
Onkyo
Optimus
30842, 30135
Anam National
Anhua
10250, 10650
10051
31023, 30670,
30531, 31074
Optimus
Realistic
Sansui
Shure
AOC
10451, 10093,
10180, 10060,
10030, 10178,
10092
Panasonic
Philips
31518, 30039
31189, 31269
Pioneer
31023, 30150,
30014, 30630,
30531
Apex Digital
Audiovox
10748, 10765,
10879, 10767,
11943
Sony
Soundesign
Victor
Proscan
Qisheng
Quasar
31254
31609
30039
31263
10451, 10180,
10875, 10092,
10623
Wards
Yamaha
Baile
10661
RadioShack
RCA
Beijing
10812, 10661
10154
31023, 31609,
31254, 30531,
31074
Bell & Howell
BenQ
Setup Code for Audio
Amp/Tuners
11032
Sharper Image
Silsonic
31263
30176
Bradford
Broksonic
10180
ADC
Aiwa
30531
10236, 10463,
11911, 11938,
11905, 11935,
11929
31405, 31243,
30121
Sony
31058, 31441,
31258, 31759
Anam
31609, 31074
31189
Soundesign
Stereophonics
Sunfire
30670
Cailing
10748
Audiotronic
Bose
31023
Candle
10030
31229
31313
Carnivale
Carver
10030
Capetronic
Carver
Coby
30531
Teac
31074, 31267
10054
31189
Technics
31308, 31518,
30039
Celebrity
Celera
10000
31263
Thorens
Victor
31189
30074
30014
10765
Denon
31360, 31142,
30904
Changcheng
Changhong
10051, 10661
Fonmix
31360
31263
30110
31273
30027
30135
30110
Wards
10156, 10765,
11156, 10767
Glory Horse
Harman/Kardon
Hitachi
Yamaha
30176, 31276,
31176
Ching Tai
Chun Yun
10092
10000, 10180,
10700, 10092,
10843
Inkel
Setup Code for TV’s
Integra
Chung Hsin
Cinema
10180, 10053
10672
Addison
Admiral
10092
10093, 10463
JBL
Version 9/11/2006
70
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Setup Code for TV’s
Setup Code for TV’s
Setup Code for TV’s
Citizen
10060, 10030,
11928, 10092
Gateway
GE
11756, 11755
Kangli
KEC
10661
11447, 10047,
11454, 10051,
10451, 10180,
10030, 10178,
11917, 10092,
11907, 11922
10180
Clarion
10180
Kenwood
KLH
10030
Commercial
Solutions
11447, 10047
10765, 10767
Kolin
10180, 10150,
10053
Conrowa
10156, 10145,
11156
Gibralter
GoldStar
10017, 10030
KTV
Kunlun
LG
10180, 10030
10051, 10661
Contec
10180
10180
10054
10180
10154, 10030,
10178, 11926
Craig
Grunpy
Haier
10180
11034
10178
10060, 10030,
10178, 10856,
10700, 10025
Crosley
Crown
Hallmark
Hankook
Curtis Mathes
10047, 10054,
10154, 10451,
10093, 10060,
10702, 10030,
10145, 10166
Lloyd's
LXI
11904
10180, 10030,
10178
10047, 10054,
10154, 10156,
10178
Harley Davidson
Harman/Kardon
Harvard
11904
10054
10180
10093
10865
10451
Magnasonic
Magnavox
11928, 11913
CXC
10180
11454, 10054,
10030, 10706,
11931, 11254,
11913, 11904,
11944
Daewoo
10154, 10451,
10180, 10030,
10178, 10672,
11928, 10092,
10661, 11909,
10623, 10700
Havermy
Helios
Hello Kitty
Hisense
Magnin
11907
Dayu
10661
11080
10145
10017
10156, 10748,
10145, 11156
Marantz
10054, 10030,
10704
Dell
Hitachi
10156, 10030,
10178, 11145,
10145, 10092,
11904, 11156
Matsushita
Maxent
10250, 10650
11755
Denon
Dumont
Durabrand
Megapower
Megatron
Memorex
10700
10463, 10180,
10178, 10171,
11034
Hongmei
Huafa
10093
10145
10145
10051
10661
10054
10017
10054
10000
10178, 10145
10154, 10463,
10150, 10178,
11911, 11926,
11924, 11920,
11927
Electroband
Emerson
10000
Huari
10154, 10236,
10463, 10180,
10178, 10171,
11944, 11909,
11929, 11905,
11928, 10623,
11911
Huodateji
Imperial Crown
Infinity
Inteq
MGA
10150, 10030,
10178, 11907
Midland
Mitsubishi
10047, 10017,
10051
JBL
Envision
Ether
10030
10154, 10250,
10093, 10236,
10180, 11250,
10150, 10030,
10178, 11917,
10836
JCB
10030
Jean
10156, 10051,
10236, 10092
Firstar
Fisher
Fortress
Fujitsu
Funai
10236
10154
Jensen
Jiahua
Jinfeng
Jinxing
10761
10051
10051
10093
Monivision
Motorola
MTC
10843, 10700
10093
10809, 10853
10180, 10171,
11904
10054, 10156,
10145
10060, 10030
10051
Furi
10145
10180
Mudan
JVC
10053, 11923,
11253
Futuretech
Multitech
10180
Version 9/11/2006
71
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Setup Code for TV’s
Setup Code for TV’s
Setup Code for TV’s
11904
NAD
10156, 10178,
Quasar
10250, 10051,
10866
11924, 10650
Soundesign
Sowa
10180, 10178
National
NEC
10051
RadioShack
10047, 10154,
10180, 10030,
10178, 11920,
11904
10156, 10051,
10060, 10178,
10092
10154, 10156,
10051, 10053,
10030, 10178,
11704
Squareview
SSS
10171
RCA
11447, 10047,
11454, 10000,
10030, 10178,
11547, 11922,
11917, 10092,
11907, 11948,
10090, 10679
10180
Newave
Nikko
10093, 10178,
10092
Starlite
10180
10030, 10178,
10092
Studio Experience
Supreme
SVA
10843
10000
Norcent
NTC
10748, 10824
10092
Realistic
10154, 10180,
10030, 10178
10748, 10865
Sylvania
10054, 10030,
10171, 11944,
11931
Rowa
10748
Onwa
10180
Runco
Sampo
10017, 10030
Optimus
10154, 10250,
10166, 10650,
11927, 11924,
11913
Symphonic
Synco
10180, 10171,
11913, 11904
10154, 10093,
10030, 10178,
10171, 10700,
10650, 11755,
10092
10000, 10451,
10093, 10060,
10178, 10092
Optonica
Orion
10093
10236, 10463,
11929, 11911,
11905
Samsung
10154, 10156,
10060, 10812,
10702, 10030,
10178, 11060,
10814, 10092,
11903, 10090,
10766
Tacico
Tandy
10178, 10092
10093
Panasonic
10054, 10250,
10051, 10650,
11941, 11927,
11924
Tashiko
Tatung
10092, 10650
10054, 10154,
10156, 10051,
10060, 11156,
11756, 11254
Panda
10051, 10706
Sansui
Sanyo
10463, 11904,
11935, 11929,
11911
Penney
10047, 10156,
10051, 10060,
10030, 10178,
11926, 11907
Technics
Techwood
Teco
10250, 10051
10051
10154, 10156,
10180, 10145,
11907
10051, 10093,
10178, 10092
Philco
Philips
10054, 10180,
10030, 10178
Sanyuan
Scotch
Scott
10093
10178
Teknika
10054, 10180,
10150, 10060,
10092
11454, 10054,
10000, 10051,
10030, 10178,
10092, 10690
10236, 10180,
10178
Telefunken
Tera
10702
10030
11904
10093
10178
10017
10748
Sears
10047, 10054,
10154, 10156,
10178, 10171,
11926, 11904
Pilot
10030
Pioneer
10166, 10866,
10679
Thomas
Tiane
Portland
Prima
10092
10761
10700
10051
Shaofeng
Sharp
10145
TMK
10093, 10030,
10650, 11917
TNCi
Princeton
Prism
Tobo
Shen Ying
Shencai
Sheng Chia
Skygiant
Skyworth
Sony
10092
Toshiba
10154, 10156,
10060, 10145,
11945, 11704,
11936, 11156,
11935, 10650,
11918
10145
Proscan
11447, 10047,
11922
10093, 10236
10180
Proton
Pulsar
10030, 10178
10017
10748
Tuntex
10030, 10092
Qingdao
11100, 10000,
10650, 11925,
Version 9/11/2006
72
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO VP42 HDTV User Manual
Setup Code for TV’s
Setup Code for TV’s
Setup Code for TV’s
TVS
10463
Vidtech
10178
White
Westinghouse
10463, 11909,
10623
VIZIO
11758, 11756,
10885, 10864
Viewsonic
11755, 10885,
10864
Yamaha
Yapshe
Zenith
10030
10250
Vector Research
Victor
10030
Wards
10054, 10030,
10178, 10866,
11156
10250, 10053,
10650
10017, 10463,
10178, 11904,
11929, 11911,
11909, 10092
Warumaia
Waycon
10661
10156
Vidikron
10054
Version 9/11/2006
73
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Technicolor Thomson Network Card TCW710 User Manual
Tektronix Stereo System AWG2005 User Manual
Tricity Bendix Dishwasher BDW 52 User Manual
Tripp Lite Power Supply 200712159 User Manual
Tyco Network Card EPO200 User Manual
UNICOM Electric TV Converter Box GEP 5300TF C User Manual
Uniden Car Stereo System BTSC1500 User Manual
Uniden Cordless Telephone DSS 2475 User Manual
Viking Range VGGT240 User Manual
VistaQuest Digital Camera PC130B User Manual