10T
VW22L HDTV QUICKSTART GUIDE
Simply follow our color-coded Step Charts and you’re done.
Before You Begin
Four Easy Steps
• Verify all of the contents of your accessory package
• Review safety guidelines in Owner’s Manual
• Place your High Definition TV so that the rear connectors are accessible
• Install AA batteries into the VIZIO Remote Control
1) Choose items to connect to your VIZIO HDTV
2) Choose equipment
connection methods
3) Select cables and
make connections
4) Use your VIZIO HDTV
• Determine which type of Signal Source and any Additional Equipment you wish
to connect to your VIZIO HDTV.
Follow the programming instructions on the other side of
this guide.
• Write down your VW22L 10T Serial Number (located on the back)
L ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
• Using the colored dots from Step One,
follow the row across to Step Two to match
up the colored dots to the same colored
connection method.
• Once you have determined the connection methods from Step Two,
follow the row to Step Three to determine what kind of cables you
need and what the connections look like on your equipment.
• The colored dots under each Signal Source and Additional Equipment indicate
which type of connections you may use to connect to your VIZIO HDTV.
• If you are using the DTV/TV input, turn over this guide
and follow Procedure 1.
• If you are using an input other than DTV/TV, turn over
this guide and follow Procedure 2.
Contents:
• Following the color-coded system, use the appropriate cables and
connect your Signal Source and Additional Equipment to the color-coded
inputs on your VIZIO HDTV. (Refer to Connection Map at bottom of page.)
• Choose ONLY one method for each piece
of equipment.
• Once connected, turn on your VIZIO HDTV and all your equipment.
Signal Sources
Additional Equipment
Power Cord
VIZIO HDTV User Manual, and
Registration Card.
Connection Reference
Connection Methods
My Equipment Has
My VIZIO HDTV Has
Cable Needed
HDMI
HDMI*
HDMI
HDMI 1
DTV / TV
RGB PC
TYPE: Digital High Definition
QUALITY: Best Digital
Remote Control
Includes 2 AA Batteries
Coaxial (RF) Cable*
DTV / TV
TYPE: Cable/Antenna
QUALITY: Best Digital/Good Analog
VGA Cable
& stereo
mini-jack
Optional
Audio
Optional
Audio
RGB PC
The Best Connection
TYPE: RGB Analog
QUALITY: Best Analog
Component & Stereo RCA Cable*
A/V RCA Cable & S-Video*
Optical Audio Cable
For the best quality picture,
we recommend using HDMI,
COMPONENT
COMPONENT 1
TYPE: Component Analog
QUALITY: Better Analog
HDMI
BEST
BETTER
GOOD
DTV, RGB or Component
inputs when possible.These
are the only inputs capable
of high definition (HD).
Using these inputs does not
guarantee high definition
unless a high definition
source is connected.
AV/S-VIDEO
AV
TYPE: Analog
QUALITY: Good Analog
+
DTV
OPTICAL
OPTICAL
TYPE: Digital Audio Out
QUALITY: Best Digital
However, not all equipment
is capable of these
RGB PC
For additional help with connecting components to your VIZIO TV, visit http://ceaconnectionsguide.com for an interactive guide
connections.TV,AV and
S-Video are not capable of
HD signals.
In need of a particular cable to make the connection you want?
+
Both DTV and TV share the
same port.The television will
automatically register which
input type is connected.
COMPONENT
3 WAYS TO GET HDTV
AV/S-VIDEO
1) Off-Air antenna (using the DTV antenna input).
To see if you are able to receive HD signals
off-air and for help choosing the right antenna,
+
TV
2) Cable - Subscribe to HD programming through
your local cable company (HD cable box required).
3) Satellite - Subscribe to HD programming
through Direct TV or Dish Network (HD satellite
receiver required).
VIZIO provides installation services, cables & wall mounts
(see details for Optional Components on back).
BACK OF TV
For more information, see your Owner’s Manual, Chapter 2, CONNECTING EQUIPMENT.
©2008 VIZIO Inc.
Q41G7800997 3A
Download from Www.Somanuals.com. All Manuals Search And Download.
|