Vizio Flat Panel Television E321MV User Manual
32” CLASS RAZOR LED™ LCD HDTV  
E321MV – user mAnuAl  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Thank You for Choosing VIZIO  
My Product Information  
And congratulations on your new VIZIO HDTV.  
To get the most out of your new VIZIO product, read these instructions before  
using your product and retain them for future reference. Be sure to inspect the  
package contents to ensure there are no missing or damaged parts.  
Product Registration  
To purchase or inquire about accessories and installation services for your VIZIO  
product, visit our website at www.VIZIO.com or call toll free at 1-888-849-4623.  
We recommend that you either:  
•
•
Register your VIZIO product at www.VIZIO.com  
Complete and mail the enclosed registration card  
Extended Warranties  
For peace of mind, and to protect your investment beyond the standard warranty,  
VIZIO offers on-site extended warranty service plans. These plans provide  
additional coverage during the standard warranty period. To purchase an extended  
warranty service plan, visit www.VIZIO.com.  
Enter your product information here for easy reference:  
Model Number:  
Serial Number:  
Date of Purchase:  
When Reading this Manual  
When you see this symbol, please read the accompanying important  
warning or notice. It is intended to alert you to the presence of  
important operating instructions.  
VIZIO recommends you attach your sales receipt to this manual for safekeeping.  
When you see this symbol, please read the accompanying helpful  
tip.  
Attach Sales Receipt Here  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E321MV  
to rain or moisture, does not operate normally or has been dropped.  
Unplug the power cord before cleaning your TV.  
Important Safety Instructions  
•
•
Your DTV is designed and manufactured to operate within defined design  
limits. Misuse may result in electric shock or fire. To prevent your TV from being  
damaged, the following instructions should be observed for the installation,  
use, and maintenance of your TV. Read the following safety instructions before  
operating your TV. Keep these instructions in a safe place for future reference.  
When moving your TV from an area of low temperature to an area of  
high temperature, condensation may form in the housing. Wait before  
turning on your TV to avoid causing fire, electric shock, or component  
damage.  
•
•
A distance of at least three feet should be maintained between your TV  
and any heat source, such as a radiator, heater, oven, amplifier etc. Do  
not install your TV close to smoke. Operating your TV close to smoke  
or moisture may cause fire or electric shock.  
•
To reduce the risk of electric shock or component damage, switch off  
the power before connecting other components to your TV.  
•
•
•
•
•
•
•
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Slots and openings in the back and bottom of the cabinet are provided  
for ventilation. To ensure reliable operation of your TV and to protect it  
from overheating, be sure these openings are not blocked or covered.  
Do not place your TV in a bookcase or cabinet unless proper ventilation  
is provided.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with a dry cloth.  
•
Never push any object into the slots and openings on your TV cabinet.  
Do not place any objects on the top of your TV. Doing so could short  
circuit parts causing a fire or electric shock. Never spill liquids on your  
TV.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
•
•
Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
•
•
Your TV should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supplied  
to your home, consult your dealer or local power company.  
Do not defeat the safety purpose of the polarized or grounding-type  
plug. A polarized plug has two blades and a third grounding prong.  
The wide blade or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
Do not apply pressure or throw objects at your TV. This may  
compromise the integrity of the display. The manufacturer’s warranty  
does not cover user abuse or improper installations.  
•
•
The power cord must be replaced when using different voltage than the  
voltage specified. For more information, contact your dealer.  
•
Protect the power cord from being walked on or pinched, particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
Your TV is equipped with a three-pronged grounded plug (a plug with  
a third grounding pin). This plug will fit only into a grounded power  
outlet. This is a safety feature. If your outlet does not accommodate the  
three-pronged, have an electrician install the correct outlet, or use an  
adapter to ground your TV safely. Do not defeat the safety purpose of  
the grounded plug.  
•
•
Only use attachments/accessories specified by the manufacturer.  
ꢀ
Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
•
•
When connected to a power outlet, power is always flowing into your  
TV. To totally disconnect power, unplug the power cord.  
•
•
Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
The lightning flash with arrowhead symbol within an equilateral triangle  
is intended to alert the user to the presence of un-isolated, dangerous  
voltage within the inside of your TV that may be of sufficient magnitude  
to constitute a risk of electric shock to persons.  
Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as when  
the power-supply cord or plug is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the apparatus has been exposed  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E321MV  
•
Do not overload power strips and extension cords. Overloading can  
result in fire or electric shock.  
cause the batteries to leak which can damage the remote control or  
injure the operator. Do not expose batteries to excessive heat such as  
sunshine, fire or the like.  
•
•
The wall socket should be installed near your TV and easily accessible.  
•
•
If any of the following occurs, contact the dealer:  
- The power cord fails or frays.  
Only power of the marked voltage can be used for your TV. Any other  
voltage than the specified voltage may cause fire or electric shock.  
- Liquid sprays or any object drops into your TV.  
- Your TV is exposed to rain or other moisture.  
- Your TV is dropped or damaged in any way.  
- The performance of your TV changes substantially.  
•
•
Do not touch the power cord during lightning. To avoid electric shock,  
avoid handling the power cord during electrical storms.  
Unplug your TV during a lightning storm or when it will not be used  
for long period of time. This will protect your TV from damage due to  
power surges.  
This apparatus shall not be exposed to dripping or splashing and  
no objects fill with liquids, such as vases, shall be placed on the  
apparatus.  
•
•
Do not attempt to repair or service your TV yourself. Opening or  
removing the back cover may expose you to high voltages, electric  
shock, and other hazards. If repair is required, contact your dealer and  
refer all servicing to qualified service personnel.  
•
•
The mains plug or appliance coupler is used as the disconnect device,  
the disconnect device shall remain readily operable.  
CAUTION - These servicing instructions are for use by qualified service  
personnel only. To reduce the risk of electric shock, do not perform any  
servicing other than that contained in the operating instructions unless  
you are qualified to do so.  
WARNING: Keep your TV away from moisture. Do not expose your TV  
to rain or moisture. If water penetrates into your TV, unplug the power  
cord and contact your dealer. Continuous use in this case may result in  
fire or electric shock.  
The lightning flash with arrowhead symbol within an equilateral triangle is  
intended to alert the user to the presence of uninsulated DANGEROUS  
VOLTAGE within the product’s enclosure that may be of sufficient  
magnitude to constitute a risk of electrical shock to persons.  
•
•
Do not use your TV if any abnormality occurs. If any smoke or odor  
becomes apparent, unplug the power cord and contact your dealer  
immediately. Do not try to repair your TV yourself.  
h    
Avoid using dropped or damaged appliances. If your TV is dropped  
and the housing is damaged, the internal components may function  
abnormally. Unplug the power cord immediately and contact your  
dealer for repair. Continued use of your TV may cause fire or electric  
shock.  
•
Do not install your TV in an area with heavy dust or high humidity.  
Operating your TV in environments with heavy dust or high humidity  
may cause fire or electric shock.  
•
•
Follow instructions for moving your TV. Ensure that the power cord and  
any other cables are unplugged before moving your TV.  
When unplugging your TV, hold the AC/DC power adapter, not the  
cord. Pulling on the power cord may damage the wires inside the cord  
and cause fire or electric shock. When your TV will not be used for an  
extended period of time, unplug the power cord.  
•
•
To reduce risk of electric shock, do not touch the connector with wet  
hands.  
Insert batteries in accordance with instructions. Incorrect polarities may  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E321MV  
Television Antenna Connection Protection  
DTV Transition Advisory  
If an outside antenna/satellite dish or cable system is to be connected to the TV,  
make sure that the antenna or cable system is electrically grounded to provide  
some protection against voltage surges and static charges.  
The nationwide switch to digital television broadcasting was complete on June  
12, 2009. Analog-only television sets that receive TV programming through an  
antenna now need a converter box to continue to receive over-the-air TV. Watch  
your local stations to find out when they will turn off their analog signal and switch  
to digital-only broadcasting. Analog-only TVs should continue to work as before  
to receive low power, Class A or translator television stations and with cable and  
satellite TV services, gaming consoles, VCRs, DVD players, and similar products.  
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information  
with regard to proper grounding of the mast and supporting structure, grounding  
of the lead-in wire to an antenna discharge unit, size of the grounding conductors,  
location of antenna discharge unit, connection to grounding electrodes, and  
requirements of the grounding electrode.  
For additional information, please contact the parties listed below, as appropriate:  
Lightning Protection  
FCC (US Federal Communications Commission)  
For added protection of the TV during a lightning storm or when it is left  
unattended or unused for long periods of time, unplug the TV from the wall outlet  
and disconnect the antenna or cable system.  
Web: www.fcc.gov  
Phone: 1-888-CALL-FCC (1-888-225-5322)  
TTY: 1-888-TELL-FCC (1-888-835-5322)  
Fax: 1-866-418-0232  
Power Lines  
Do not locate the antenna near overhead light or power circuits, or where it could  
fall into such power lines or circuits. Remember, the screen of the coaxial cable is  
intended to be connected to earth in the building installation.  
E-mail: [email protected]  
NTIA (National Telecommunications and Information Administration)  
Web: www.ntia.doc.gov  
Phone: 1-888-DTV-2009 (1-888-388-2009)  
Ground Clamp  
Antenna Lead In Wire  
List of US Television Stations: www.high-techproductions.com/usTVstations.htm  
Your TV comes with a built-in tuner capable of processing digital  
broadcasts. No extra converter box is needed.  
Antenna Discharge Unit  
(NEC Section 810-20)  
Grounding Conductors  
(NEC Section 810-21)  
Ground Clamps  
Power Service Grounding Electrode System  
(NEC ART 250, part H)  
Electric Service Equipment  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Setting the Time Zone..........................................................................16  
Adjusting the Time for Daylight Savings..............................................17  
Enabling or Disabling Automatic Date and Time Updates...................17  
Setting the Date and Time ...................................................................17  
Adjusting the TV Settings for Use with A PC ..........................................18  
Turning the VIZIO Light On or Off............................................................18  
Table of Contents.....................................................................7  
Installing the TV .......................................................................1  
Inspecting the Package Contents...........................................................1  
Installing the TV.......................................................................................1  
Installing the TV Stand.........................................................................1  
Installing the TV on a Wall....................................................................2  
Using the Other Menu Settings.................................................19  
Navigating the On-Screen Menu.............................................................19  
Setting the Sleep Timer...........................................................................19  
Viewing a USB Photo Slideshow ............................................................20  
Using the Photo Menu.........................................................................20  
Using the Modify Photo Menu.............................................................21  
Setting the Screen Aspect Ratio.............................................................21  
Screen Aspect Ratio Table...................................................................22  
Adjusting the Audio Settings...................................................................23  
Enabling or Disabling SRS TruSurround HD........................................23  
Enabling or Disabling SRS TruVolume.................................................23  
Adjusting the Equalizer Settings..........................................................23  
Adjusting the Speaker Balance............................................................24  
Enabling or Disabling the Built-In Speakers ........................................24  
Selecting the Digital Output Mode.......................................................24  
Adjusting Bass and Treble Levels........................................................25  
Resetting the Audio Settngs................................................................25  
Adjusting the Picture Settings.................................................................25  
Enabling or Disabling the Ambient Light Sensor .................................25  
Changing the Picture Mode.................................................................26  
Adjusting the Noise Reduction Setting................................................26  
Adjusting the Color Temperature .........................................................27  
Enabling or Disabling Color Enhancement ..........................................27  
Enabling or Disabling Adaptive Luma..................................................27  
Enabling or Disabling DCR (Dynamic Contrast Ratio) .........................28  
Controls and Connections ........................................................4  
Rear Panel...............................................................................................4  
Right Side Panel......................................................................................5  
Front Panel..............................................................................................5  
Remote Control.......................................................................................6  
Replacing the Batteries........................................................................7  
Connecting Your Devices..........................................................8  
Before You Begin ....................................................................................8  
Connecting Your Devices........................................................................8  
Completing the First-Time Setup..............................................10  
Adjusting the TV Settings .........................................................11  
Navigating the On-Screen Menu.............................................................11  
Changing the Input Source .....................................................................11  
Customizing Input Names ...................................................................12  
Setting Up Channels...............................................................................12  
Changing the Signal Source ................................................................13  
Scanning for Channels.........................................................................13  
Scanning for New or Additional Channels...........................................14  
Removing Channels from the Master List............................................14  
Changing the Audio Language ............................................................15  
Customizing Channel Names ..............................................................15  
Changing the On-Screen Menu Language .............................................16  
Setting the TV’s Date and Time...............................................................16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E321MV  
Resetting the Picture Settings .............................................................28  
Using the Parental Controls ....................................................................28  
Accessing the Parental Controls Menu................................................28  
Locking and Unlocking Channels........................................................29  
Blocking and Unblocking Content by Rating.......................................29  
Setting the TV Button Locks................................................................30  
Changing the Parental Control Passcode............................................30  
Resetting the Content Locks ...............................................................30  
Viewing System Info and Resetting to Factory Defaults.........................31  
Displaying System Information............................................................31  
Restoring the TV to the Factory Default Settingss...............................31  
Restarting the Setup Wizard................................................................31  
Setting Up Closed Captioning ................................................................32  
Changing the Appearance of Digital Closed Captions........................32  
ON PARTS AND LABOR .........................................................................36  
Parts and Labor ...................................................................................36  
Type of Service ....................................................................................36  
Limitations and Exclusions ..................................................................36  
Personal Data ......................................................................................36  
Zero Bright Pixel Defect Guarantee.....................................................36  
Legal & Compliance.................................................................37  
FCC Class B Radio Interference Statement ........................................37  
Notice...................................................................................................37  
FCC warning........................................................................................37  
Caution.................................................................................................37  
Open Source Software Notice.............................................................37  
Troubleshooting & Technical Support........................................33  
The TV displays “No Signal.”...............................................................33  
There is no power.................................................................................33  
The power is on, but there is no image on the screen.........................33  
There is no sound. ...............................................................................33  
The colors on the TV don’t look right...................................................33  
The buttons on the remote aren’t working...........................................33  
The image quality is not good..............................................................33  
The picture is distorted........................................................................34  
The display image does not cover the entire screen...........................34  
The TV has pixels (dots) that are always dark or always lit. ................34  
I see “noise” or static on the screen....................................................34  
When I change input source, the volume changes..............................34  
When I change input source, the display image changes size............34  
Specifications..........................................................................35  
Limited Warranty .....................................................................36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the TV  
1
Inspecting the Package Contents  
Installing the TV  
Before installing your new TV, take a moment to inspect the package contents.  
Use the images below to ensure nothing is missing or damaged.  
After removing the TV from the box and inspecting the package contents you can  
begin installing the TV. Your TV can be installed in two ways:  
When you have completed your inspection, install the TV.  
•
•
On a flat surface, using the included stand  
On a wall, using a VESA-standard wall mount (not included)  
Installing the TV Stand  
Your TV includes a stand designed to support the weight of the TV and keep it  
from falling over. However, the TV can still fall over if:  
•
•
•
It is placed on an uneven, unstable, or non-level surface  
It is pushed, pulled, or otherwise improperly moved  
If an earthquake occurs and the TV is not properly secured  
To install the TV stand:  
1. Place the TV screen-down on a clean,  
flat surface. To prevent scratches or  
damage to the screen, place the TV on  
a soft surface, such as carpet, rug, or  
blanket.  
VIZIO LCD HDTV with Stand  
2. Align the base with the stand neck.  
Gently push the base onto the stand  
neck.  
If the base is not joining with the  
stand neck, you may have it facing  
backwards.  
User Manual and  
Quick Start Guide  
Remote Control with  
Batteries  
Package Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
 
E321MV  
1
Installing the TV on a Wall  
3. Turn the attached thumbscrew until it  
is completely tightened.  
To mount your TV on a wall, you will need a wall mount. Consult the information  
below to find the appropriate mount for your TV model:  
Fold down the thumbscrew tab so it is  
flat against the bottom of the base.  
E321MV  
Screw Size:  
Screw Length:  
Screw Pitch:  
M6  
15mm  
1mm  
4. Move the TV with attached stand into  
an upright position and place on a flat,  
level, and stable surface.  
Hole Pattern:  
200mm x 200mm  
Installing a TV on a wall requires lifting. To prevent injury or damage  
to the TV, ask someone to help you.  
Be sure the mount you choose is capable of supporting the weight of the TV. After  
you have determined that you have the correct mount for your TV, you can begin  
the installation.  
5. To ensure proper ventilation, leave at  
least 1” of space between the back of  
the TV and any other objects (walls,  
etc).  
To install your TV on a wall:  
1”  
1. Disconnect any cables connected to  
your TV.  
2. Place the TV face-down on a clean,  
flat, stable surface. Be sure the surface  
is clear of debris that can scratch or  
damage the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
 
E321MV  
1
3. Turn the attached thumbscrew until it  
is completely loosened.  
4. Gently remove the stand neck.  
5. Attach your TV and wall mount to the wall, carefully following the  
instructions that came with your mount.  
Use only with a UL-listed wall mount bracket rated for the weight/load of  
this TV. See Appendix A - Specifications for the weight of this TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Controls and Connections  
2
Rear Panel  
USB: Connect a USB thumb drive to view photos.  
HDMI (1,2,3): Connect HDMI devices.  
Component: Connect component device.  
Composite: Connect composite device.  
3.5mm Stereo Out: Connect 3.5mm audio device.  
USB  
Cable/Antennal: Connect RF/Coaxial connector from cable, antenna, or  
satellite box.  
HDMI (1,2,3)  
Component  
RGB PC: Connect RGB cable from computer. Use 3.5mm port to  
connect PC audio.  
3.5mm PC Connect 3.5mm cable from PC audio out when using  
Audio In: RGB PC port to display PC output.  
Optical Digital Connect SPDIF/Optical audio device (soundbar,  
Audio Out: receiver, etc).  
Composite  
Cable/Antenna  
3.5mm PC Audio In  
RGB PC  
3.5mm Stereo  
Out  
Optical Digital  
Audio Out  
Rear Panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
 
E321MV  
2
Right Side Panel  
Front Panel  
Power  
Remote Control  
Sensor  
VIZIO Light  
Menu  
Front Panel  
Channel Up  
Channel Down  
Remote Control Sensor: When using the remote, point it directly at this  
sensor.  
VIZIO Light: This light is white when the TV is on.  
When the TV is off, the light is orange.  
Volume Up  
Volume Down  
Input  
Right Side Panel  
Power: Turn the TV on or off.  
Menu: Display on-screen menu.  
Channel Up/Down: Change the channel.  
Volume Up/Down: Increase or decrease the loudness of the TV audio.  
Input: Change the input device. Press once to display the  
Input menu. Continue pressing the button to highlight  
a different input source. Press Menu to confirm your  
selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
 
E321MV  
2
Remote Control  
Power/Standby: Turn the TV on or off.  
Input: Change the input device.  
A/V Controls: Control external device (CEC-enabled  
devices only).  
Info: Display the Info Window.  
CC: Open the Closed Captioning menu.  
Menu: Display the on-screen menu.  
Exit: Close the on-screen menu.  
Input  
CC  
Power/Standby  
A/V Controls  
Info  
Arrow: Navigate the on-screen menu and episode  
guide.  
OK: Select highlighted menu option.  
Exit  
OK  
Menu  
Arrow  
Guide: Display the episode guide (digital channels  
only).  
Back: Go to the previous on-screen menu op-  
Back  
Guide  
tions.  
V Button: Launch the USB photo viewer.  
V Button  
Channel Up/ Change the channel. With each press of  
Down: the button, the channel will increase or  
decrease by one.  
Volume  
Up/Down  
Channel  
Up/Down  
Volume Up/ Increase or decrease the loudness of the  
Mute  
Last  
Down: TV’s audio.  
Mute: Turn the sound off or on. When mute is  
Number Pad  
activated, the TV’s audio is turned off.  
Last: Return to the channel last viewed.  
Number Pad: Use the number pad to manually enter a  
Wide  
Dash (-)  
channel.  
Dash (-): Use with number pad to manually enter a  
digital  
sub-channel. (For example, 18-4 or 18-5.)  
Wide: Switch between display modes.  
Remote Control  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
 
E321MV  
2
Replacing the Batteries  
1. Remove the battery cover by pressing  
gently on the “V” and pushing the  
cover away from the remote.  
2. Insert two AAA batteries into the  
remote control. Make sure that the (+)  
and (-) symbols on the batteries match  
the (+) and (-) symbols inside the  
battery compartment.  
3. Replace the battery cover.  
• Use only good quality batteries.  
• Inserting the batteries incorrectly may result in cracking or leakage  
that may cause a fire or result in injury.  
• Dispose of old or dead batteries in accordance with local hazardous  
waste regulations.  
• Keep batteries away from children and pets.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
   
Connecting Your Devices  
3
Your HDTV can be easily connected to an external device:  
Connecting Your Devices  
•
•
•
•
•
DVD or Blu-Ray player  
Video game console  
Cable box  
Once you have determined the best available connection type on both your  
device and the TV, ensure you have the corresponding cable.  
To connect a device to the TV:  
External antenna  
Or other device  
1. Ensure both the TV and your device are off.  
2. Connect the device and the TV. Use the best available connection. See the  
Device Connection Chart on the next page.  
Before You Begin  
To connect a device to the HDTV:  
Ensure each end of the cable is securely connected.  
3. Turn the TV on by pressing the Power/Standby button on the remote.  
4. Turn your device on.  
1. Verify that the device has one of the following types of video ports  
available:  
5. When you are ready to use your newly connected device, press the INPUT  
button on the remote and select the connection type (HDMI, RGB, etc) from  
the on-screen menu. Press OK.  
6. Check the list of devices/connection types below for special instructions:  
HDMI  
RGB  
•
•
Cable TV (without cable box/directly from wall)  
Perform a channel scan. See Scanning for Channels on page 13.  
RGB  
Make sure the desktop resolution on the PC is set to 1920 x 1080. Set  
the Screen Mode to Normal.  
Component  
RF/Antenna  
Composite AV  
Required Device Ports  
2. Ensure the TV has a matching port available.  
3. Ensure you have a cable that matches the available port. For example, if  
you are connecting a Blu-ray player with an HDMI port, be sure you have  
an HDMI cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
 
E321MV  
3
Select one of the connection types.  
Use the cable(s) shown to connect  
the TV to your device.  
Select One:  
HDMI  
DIGITAL  
BEST  
OR  
OR  
RF/  
COAXIAL  
DIGITAL /  
ANALOG  
RGB  
ANALOG  
BETTER  
OR  
COMPONENT  
ANALOG  
OR  
COMPOSITE  
AV  
ANALOG  
GOOD  
Device Connection Chart  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Completing the First-Time Setup  
4
The first time you turn on the TV, the Setup App will guide you through each of  
4. If the TV is connected to an external  
the steps necessary to get your TV ready for use.  
antenna, select Antenna, then press  
OK and go to step 5.  
Before you begin the first-time setup:  
If the TV is connected to a cable  
service without a set-top box (cable is  
connected directly from the wall outlet)  
select Cable, then press OK and go to  
step 5.  
•
Your TV should be installed and the power cord should be connected  
to an electrical outlet.  
•
•
Have your remote ready. Ensure the batteries are inserted.  
Your devices should be connected.  
To complete the first-time setup:  
If the TV is connected to a cable or  
satellite set-top box, press the EXIT  
button on the remote, then select the  
input to which your set-top box is  
connected (HDMI, COMP, or AV).  
1. Turn the TV on by pressing the  
Power/Standby button on the  
remote.  
The Setup App is displayed.  
5. Use the Up/Down Arrow buttons on  
the remote to highlight Scan, then  
press OK.  
Use the Up/Down Arrow buttons on  
the remote to highlight your preferred  
language, then press OK.  
The TV begins a channel scan.  
Wait for the channel scan to finish.  
2. Use the Up/Down Arrow buttons on  
the remote to highlight Home Mode,  
then press OK.  
6. When the channel scan is complete,  
the Congratulations screen is  
displayed.  
3. Use the Up/Down Arrow buttons on  
the remote to highlight your time zone,  
then press OK.  
Press the Up/Down Arrow buttons on  
the remote to highlight Off or On for  
daylight savings time, then press OK.  
The first-time setup is complete.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
 
Adjusting the TV Settings  
5
From the TV Settings Menu, you can:  
Changing the Input Source  
•
Change the input source or  
rename inputs  
External devices such as DVD players, Blu-Ray Players, and video game consoles  
can be connected to your TV. To display one of these devices on your TV, you  
must first change the input source in the on-screen menu.  
•
•
Set up channels  
Change the on-screen menu  
language  
To quickly access the Input Source menu, press the INPUT button  
•
•
Change the TV’s date and time  
on the remote.  
Adjust the TV settings for use with  
a PC  
To change the input source from the TV menu:  
•
Turn the VIZIO light on or off  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV menu is displayed.  
3. Highlight Input and press OK. The  
Input menu is displayed.  
4. Use the Arrow buttons to highlight the  
input source you want to display and  
press OK.  
Navigating the On-Screen Menu  
To open the on-screen menu, press the OK  
or MENU button on the remote.  
Use the Arrow buttons to highlight a menu  
option, and press the OK button to select  
that option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
E321MV  
5
Customizing Input Names  
Setting Up Channels  
When you have multiple devices connected to your TV, it can become difficult to  
remember the inputs to which they are connected. Your TV features the ability to  
customize the names of these inputs to make them easy to remember. (Custom  
names have a 10-character limit.)  
From the channel menu you can:  
•
•
•
•
Change the signal source  
Start a new channel scan  
For example, HDMI 1 could be renamed as My Blu-ray.  
To customize an input name:  
Scan for new/additional channels  
Remove channels from the master  
list  
1. Press the MENU button on the remote.  
•
•
Change the audio language  
Customize channel names  
The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight TV  
and press OK.  
3. Use the Arrow buttons to highlight  
Input and press OK.  
4. Use the Arrow buttons to highlight  
Input Naming and press OK.  
5. Use the Left/Right Arrow buttons on  
the remote to highlight the input source  
you wish to rename.  
6. Use the Arrow buttons to highlight  
Custom Label and press OK.  
The on-screen keyboard is displayed.  
7. Use the Arrow and OK buttons to spell  
the custom input name.  
When you are finished, highlight OK  
and press OK.  
8. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
 
E321MV  
5
Changing the Signal Source  
Scanning for Channels  
Using this option, you can change the signal source for the coaxial (TV) input.  
Before the TV can detect and display channels and their associated information,  
you must scan for channels. A channel scan may also be necessary when the  
TV has been moved to an area where different free-to-air broadcast television  
channels are available.  
To change the signal source:  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
To scan for channels:  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
3. Use the Arrow buttons to highlight  
Channels and press OK.  
4. Use the Arrow buttons to highlight  
Signal Source and press OK. The  
Signal Source menu is displayed.  
3. Use the Arrow buttons to highlight  
Channels and press OK.  
4. Use the Arrow buttons to highlight  
5. Use the Arrow buttons to change the  
Auto Channel Scan and press OK.  
setting to Cable or Antenna.  
5. Use the Number Pad to enter your  
6. Press EXIT.  
parental control passcode.  
The channel scan begins.  
6. Wait for the channel scan to reach  
100%, then press EXIT.  
If you want to cancel the channel  
scan before it is completed, highlight  
Cancel and press OK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
   
E321MV  
5
Scanning for New or Additional Channels  
Removing Channels from the Master List  
When a new channel becomes available in your area, you do not have to rescan  
all channels to add the new channel. Using the add channel feature, you can  
restrict the scan to new channels only.  
By customizing the master channel list, you can choose which channels can be  
displayed. Channels not in the list will not be available when watching broadcast  
television.  
1. Press the MENU button on the remote.  
This is useful because your master channel list settings are preserved.  
To scan for new channels:  
The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
3. Use the Arrow buttons to highlight  
Channels and press OK.  
4. Use the Arrow buttons to highlight  
3. Use the Arrow buttons to highlight  
Skip Channel, then press OK.  
Channels and press OK.  
The master channel list is displayed.  
4. Use the Arrow buttons to highlight  
Additional Scan.  
5. To add a channel to the list, highlight  
the channel and press OK. When a  
channel is added, a check mark is  
displayed next to the channel.  
5. Use the Arrow buttons to change the  
option to On.  
6. Perform a channel scan. See Scanning  
for Channels on page 13.  
To remove a channel from the list,  
highlight the channel and press OK.  
When the channel has been removed,  
the checkmark is not displayed.  
To add all available channels to the list,  
highlight Mark All and press OK.  
To remove all available channels from  
the list, highlight Unmark All and press  
OK.  
To include only digital channels in the  
list, highlight Skip Analog Only and  
press OK.  
6. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
 
E321MV  
5
Changing the Audio Language  
Customizing Channel Names  
Some digital free-to-air and cable channels broadcast programs in more than one  
language. The TV’s MTS (Multichannel Television Sound) feature allows you to  
listen to audio in your preferred language.  
Your TV features the ability to customize channel names, making them easy to  
identify. (Custom names have a 10-character limit.)  
For example, KBOT-DT could be renamed as Favorite.  
To customize a channel name:  
Not all programs are broadcast in multiple languages. The MTS  
feature only works when the program being viewed is being  
broadcast in the language you select.  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
To use the Analog MTS feature:  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
1. From the TV Settings menu, highlight  
Channels and press OK.  
3. Use the Arrow buttons to highlight  
2. Highlight Analog MTS and press OK.  
Channels and press OK.  
3. Select Mono, Stereo, or SAP  
(secondary audio programming). Press  
OK.  
4. Use the Arrow buttons to highlight  
Channel Name Edit and press OK.  
5. Use the Arrow buttons to highlight  
4. Press the EXIT button on the remote.  
Custom Label and press OK.  
To use the Digital MTS feature:  
The on-screen keyboard is displayed.  
1. From the TV Settings menu, highlight  
6. Use the Arrow and OK buttons to spell  
Channels and press OK.  
the custom channel name.  
2. Highlight Digital MTS and press OK.  
When you are finished, highlight OK  
and press OK.  
3. Select your preferred language:  
English, French, or Spanish. Press  
OK.  
7. Press EXIT.  
4. Press the EXIT button on the remote.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
 
E321MV  
5
Changing the On-Screen Menu Language  
Setting the TV’s Date and Time  
Your TV can display the on-screen menu in different languages.  
To change the on-screen menu language:  
From the Date & Time menu, you can:  
•
•
•
•
Set the time zone  
Adjust the time for daylight savings  
1. Press the MENU button on the remote.  
Enable or disable automatic date and time updates  
Set the current date and time  
The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
Setting the Time Zone  
To set the time zone:  
3. Use the Arrow buttons to highlight  
1. Press the MENU button on the remote.  
Menu Language and press OK.  
The on-screen menu is displayed.  
4. Use the Arrow buttons to highlight  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
your preferred language and press OK.  
5. Press EXIT.  
3. Use the Arrow buttons to highlight  
Date & Time and press OK.  
4. Use the Arrow buttons to highlight  
Time Zone and press OK.  
5. Use the Arrow buttons to highlight  
your time zone and press OK.  
6. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
 
E321MV  
5
Adjusting the Time for Daylight Savings  
Setting the Date and Time  
When enabled, this setting will automatically adjust the time for zones which  
recognize daylight savings time.  
Using this menu option, you can manually set the TV’s date and time.  
To manually set the time:  
To enable or disable the daylight savings adjustment:  
1. Press the MENU button on the remote.  
1. Press the MENU button on the remote. The on-screen menu is displayed.  
The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote to highlight the TV icon and press  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
OK. The TV Settings menu is displayed.  
3. Use the Arrow buttons to highlight Date & Time and press OK.  
4. Use the Arrow buttons to highlight Daylight Saving.  
5. Use the Arrow buttons to change the setting to On or Off.  
6. Press EXIT.  
3. Use the Arrow buttons to highlight  
Date & Time and press OK.  
4. Use the Arrow buttons to highlight  
Current Time.  
5. Use the Arrow buttons to highlight  
individual numbers in the date and  
time. Use the Number Pad to enter the  
current date and time.  
Enabling or Disabling Automatic Date and Time Updates  
The current date and time is broadcast digitally in many areas. Your TV can  
automatically set the time and date using this information.  
6. Press EXIT.  
To manually set the date:  
When this setting is On, you cannot manually set the date and time.  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
To enable or disable automatic updates:  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
1. Press the MENU button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote to highlight the TV icon and press  
OK. The TV Settings menu is displayed.  
3. Use the Arrow buttons to highlight  
Date & Time and press OK.  
3. Use the Arrow buttons to highlight Date & Time and press OK.  
4. Use the Arrow buttons to highlight Auto Update.  
5. Use the Arrow buttons to change the setting to On or Off.  
6. Press EXIT.  
4. Use the Arrow buttons to highlight  
Today’s Date.  
5. Use the Arrow buttons to highlight  
individual numbers in the date and  
time. Use the Number Pad to enter the  
current date and time.  
6. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
 
E321MV  
5
Turning the VIZIO Light On or Off  
Adjusting the TV Settings for Use with A PC  
This setting allows you to turn off the back-lit VIZIO logo on the front bezel of your  
TV.  
Your TV can be used to display output from a home computer using the RGB port.  
These settings are only available when viewing content from the  
RGB port.  
To turn the VIZIO Light on or off:  
5. Press the MENU button on the remote.  
The on-screen menu is displayed.  
To adjust the PC settings:  
6. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote  
to highlight the TV icon and press OK.  
The TV Settings menu is displayed.  
7. Use the Arrow buttons to highlight  
VIZIO Logo and press OK.  
3. Use the Arrow buttons to highlight PC  
8. Use the Left/Right Arrow buttons to  
Settings and press OK.  
select On or Off:  
•
When set to Off, the VIZIO logo  
will briefly light up when the TV is  
turned on. It will remain off while  
the TV is on.  
4. Use the Arrow and OK buttons to  
adjust each of the following options:  
Horiz. Position - Adjust the horizontal  
(left/right) position of the picture.  
•
When set to On, the VIZIO logo will  
stay lit while the TV is on.  
Vertical Position - Adjust the vertical  
(up/down) position of the picture.  
Fine Tune - Adjust the synchronization  
between the PC and the TV. Increase  
or decrease this setting if you see  
“waviness” or a blurry picture.  
If you would like the TV to automatically adjust the picture for best  
quality, select Auto Sync and press OK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
 
Using the Other Menu Settings  
Your TV features an easy-to-use on-screen menu. Using this menu, you can:  
Setting the Sleep Timer  
•
•
•
•
•
•
•
Set the sleep timer  
When activated, the TV’s sleep timer will turn the TV off after a set period of time.  
To use the sleep timer:  
View a USB photo slideshow  
Set the screen aspect ratio  
Adjust the audio settings  
Adjust the picture settings  
Adjust the parental controls  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote  
to highlight the Timer icon and press  
OK. The Timer menu is displayed.  
Get system info or reset to  
factory defaults  
•
Set up closed captions  
3. Use the Up/Down Arrow buttons on  
the remote to highlight the period of  
time after which you want the TV to  
power off (30, 60, 90, or 120 minutes).  
4. Press OK, then press EXIT.  
Navigating the On-Screen Menu  
To open the on-screen menu, press the OK  
button on the remote.  
Use the Arrow buttons to highlight a menu  
option, and press the OK button to select  
that option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
 
E321MV  
6
Using the Photo Menu  
Viewing a USB Photo Slideshow  
The Photo menu has several options:  
Your player features a USB port where you can connect and share a USB thumb  
drive containing your photos.  
•
Browse Photos - Allows you to  
highlight and select a photo from  
the thumbnail gallery.  
The TV supports the following file types:  
•
View Slideshow - Start a  
full-screen photo slideshow.  
Media Type  
Images  
File Types  
•
Sort by - Change the display order  
of photos. Choose Original, Title  
A-Z, Title Z-A, Oldest First, or  
Newest First.  
.jpeg  
.jpg  
•
•
View - Choose Folders (individual  
folders and their contents),  
Favorites, or All.  
To play USB media, you must first save your images onto a USB thumb drive.  
Remember:  
Slide Settings - Change the  
slideshow settings. Available  
options are Repeat, Shuffle, Full  
Screen (this may distort some  
photos to fill the screen), and  
Speed (Slow or Fast).  
•
•
•
•
The USB thumb drive must be formatted as FAT32  
Files on the USB thumb drive must be a supported file type  
The USB thumb drive must have a minimum 1GB memory  
The TV will not play media from external hard drives or mp3 players  
•
•
Picture Settings - Change the  
display settings. See Adjusting the  
Picture Settings on page 25.  
To play your USB media:  
1. Load your photos onto a USB thumb drive using your home computer.  
2. Insert the USB thumb drive into the USB port on the back of the TV.  
3. Press the MENU button on the remote. The on-screen menu is displayed.  
Thumbnail Size - Move the on-screen slider to change the size of  
displayed thumbnail images. Choose Large or Small.  
4. Use the Arrow buttons on the remote to highlight the Photo icon and press  
OK. The Photo screen is displayed.  
5. Use the Arrow buttons on the remote to highlight the photo you would like  
to be displayed first, then press the Play button. The slideshow begins.  
•
•
•
To pause the slideshow, press the Pause button.  
To go to the previous photo, press the Stop button.  
To exit the slideshow, press the EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
   
E321MV  
6
Using the Modify Photo Menu  
Setting the Screen Aspect Ratio  
This menu allows you to zoom in and out, mark your favorite photos, rotate  
photos, and see your image metadata.  
TheTVcandisplayimagesinfivedifferentmodes:Normal,Wide,Zoom,Panoramic,  
and Stretch. Each mode changes the picture according to the content’s original  
format.  
To open the Modify Photo menu:  
1. When you are viewing a photo in  
fullscreen, press the OK button on the  
remote. The Modify Photo menu is  
displayed.  
Use the table on the next page to determine the best aspect ratio for your content  
type. Areas in red will not be visible on your TV screen.  
To adjust the screen aspect ratio:  
2. Use the Arrow and OK buttons on  
the remote to select one of the menu  
options:  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote to highlight the Wide icon and press  
OK. The Wide menu is displayed.  
•
•
•
•
Zoom In - Select this option up to  
4 times to zoom in.  
3. Use the Left/Right Arrow buttons on the remote to highlight the screen  
mode you want to display, then press OK:  
Zoom Out - Select this option to  
zoom back out.  
•
Normal preserves the content’s original aspect ratio. Since the 4:3  
aspect ratio is not large enough to fill the TV’s screen, black bars are  
added to the left and right of the display image.  
Pan - Select this option when  
zoomed in to move the image.  
•
Wide stretches a 4:3 aspect ratio picture to the edges of the screen.  
Since the picture is being stretched, the display image may appear  
distorted. If the program is already formatted for widescreen viewing  
(1.85:1 or 2.35:1), then black bars will appear on the top and bottom of  
the display image.  
Favorite - Select this option to  
mark the image as a Favorite. You  
can then use the View Favorites  
option to display only marked  
photos.  
•
•
Zoom expands images with black bars to fit the screen.  
•
•
Rotate Photo - Select this option to rotate the photo 90° counter-  
clockwise. This option cannot be selected while zoomed in.  
Panoramic expands the display image to fill the screen. Images may  
appear wider than intended. If you are watching widescreen (1.85:1  
or 2.35:1) content, black bars will still appear on the top and bottom  
of the display image. This option is only available when the TV is  
displaying a 480i/480p source.  
Info - Select this option to open an info window. The window displays  
image metadata including date, resolution, and file size. The metadata  
may vary according to your camera settings.  
3. When you have finished, use the Arrow buttons to highlight Done and  
•
Stretch expands the display image to fill the screen. Images may  
appear wider than intended. If you are watching widescreen (1.85:1  
or 2.35:1) content, black bars will still appear on the top and bottom  
of the display image. This option is only available when the TV is  
displaying a 720p/1080i/1080p source.  
press OK.  
You can also quickly access the Wide menu by pressing the WIDE  
button on the remote.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
E321MV  
6
Screen Aspect Ratio Table  
Original  
Content  
Format  
480p/480i (4:3)  
720p (16:9)  
1080p/1080i (16:9)  
RGB (4:3)  
RGB (16:9)  
Normal  
Wide  
Zoom  
Panoramic  
Stretch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
 
E321MV  
6
Enabling or Disabling SRS TruVolume  
Adjusting the Audio Settings  
Using the Audio Settings menu, you can adjust the following:  
TruVolume intelligently normalizes volume fluctuations during television  
commercials or channel changes.  
•
Enable or disable  
SRS TruSurround HD™  
To enable or disable SRS TruVolume:  
•
•
•
•
Enable or disable SRS TruVolume®  
Adjust the equalizer settings  
Adjust speaker balance  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Audio and press OK.  
3. Use the Arrow buttons to highlight SRS TruVolume.  
4. Press the Right/Left Arrow buttons to select On or Off and press EXIT.  
Enable or disable the built-in  
speakers  
•
Select the digital audio output  
mode  
Adjusting the Equalizer Settings  
•
•
Adjust bass and treble levels  
Reset the audio settings  
Your TV features six preset equalizer settings. These settings allow you to  
customize your TV’s sound to match the type of programming you most often  
enjoy.  
To adjust the equalizer settings menu, SRS TruSurround HD must  
be set to Off.  
To adjust the equalizer settings:  
1. Press the OK button on the remote.  
The on-screen menu is displayed.  
Enabling or Disabling SRS TruSurround HD  
2. Use the Arrow buttons to highlight  
TruSurround HD is a robust multichannel virtualization technology developed  
by SRS Labs that provides an enhanced listening experience unlike any other  
technology offered for a two speaker playback environment.  
Audio and press OK.  
3. Use the Arrow buttons to highlight  
Equalizer Settings and press OK.  
To enable or disable SRS TruSurround HD:  
4. Use the Arrow buttons to highlight one  
of the following settings and press OK:  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Audio and press OK.  
3. Use the Arrow buttons to highlight SRS TruSurround HD.  
4. Press the Right/Left Arrow buttons to select On or Off and press EXIT.  
•
•
•
•
•
Flat  
Classical  
Rock  
Pop  
Jazz  
5. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
E321MV  
6
Adjusting the Speaker Balance  
Selecting the Digital Output Mode  
The built-in speakers can be adjusted to distribute the sound between the left and  
right speakers.  
Using this menu option, you can force the TV to downsample unsupported audio  
formats to PCM audio. You may want to use this option if you have an older audio  
receiver connected to the TV.  
To adjust the speaker balance:  
If you are unfamiliar with audio formats, or your TV is not connected  
to an audio receiver, VIZIO recommends you set this option to Auto.  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Audio and press OK.  
3. Use the Arrow buttons to highlight Balance and press OK.  
4. Use the Arrow buttons to adjust the speaker balance:  
This option only affects audio output from the optical port.  
To select the digital output mode:  
•
To increase the loudness of the right speaker, increase the balance  
setting.  
1. Press the OK button on the remote.  
•
To increase the loudness of the left speaker, decrease the balance  
setting.  
The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight  
Enabling or Disabling the Built-In Speakers  
Audio and press OK.  
Using this menu option, you can turn the built-in speakers on or off. This is often  
used when the TV is connected to a home audio system.  
3. Use the Arrow buttons to highlight  
Digital Audio Out and press  
OK.  
To enable or disable the built-in speakers:  
4. Use the Arrow buttons to highlight  
Auto or Force PCM and press  
OK.  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Audio and press OK.  
3. Use the Arrow buttons to highlight Speakers and press OK.  
4. Press the Right/Left Arrow buttons to select On or Off and press EXIT.  
5. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
 
E321MV  
6
Adjusting Bass and Treble Levels  
Adjusting the Picture Settings  
The bass and treble levels for your TV’s built-in speakers can be adjusted to your  
liking.  
Using the Picture menu, you can adjust the  
following settings:  
•
Enable or disable the ambient light  
sensor  
To adjust the bass and treble levels, SRS TruSurround HD must be  
set to Off.  
•
•
•
•
•
•
Change the picture mode  
To adjust the bass and treble levels:  
Adjust noise reduction  
Adjust color temperature  
1. Press the OK button on the remote.  
The on-screen menu is displayed.  
Enable or disable color enhancement  
Enable or disable adaptive luma  
2. Use the Arrow buttons to highlight  
Audio and press OK.  
Enable or disable DCR  
(Dynamic Contrast Ratio)  
3. Use the Arrow buttons to highlight  
•
Reset the picture mode settings  
Bass & Treble and press OK.  
4. Use the Arrow buttons to highlight  
Bass or Treble and press OK.  
5. Use the Left/Right Arrow buttons to  
increase or decrease the level.  
6. When you are finished, press EXIT.  
Enabling or Disabling the Ambient Light Sensor  
Resetting the Audio Settngs  
When enabled, the ambient light sensor detects the light levels in the room to  
optimize the brightness of the TV’s backlight.  
To reset the audio settings to the factory default settings:  
1. Press the OK button on the remote. The on-screen menu is displayed.  
When the ambient light sensor is enabled, you will be unable to  
manually change the TV’s backlight settings.  
2. Use the Arrow buttons to highlight Audio and press OK.  
3. Use the Arrow buttons to highlight Reset Audio Mode and press  
To enable or disable the ambient light sensor:  
OK.  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Picture and press OK.  
3. Use the Arrow buttons to highlight Ambient Light Sensor.  
4. Use the Left/Right Arrow buttons to change the setting to Off or On.  
5. Press EXIT.  
4. The TV displays “Are you sure you want to RESET Audio Settings to the  
factory defaults?”  
Use the Arrow buttons to highlight Yes and press OK.  
5. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
   
E321MV  
6
Changing the Picture Mode  
Adjusting the Noise Reduction Setting  
Your TV display can be adjusted to suit your preferences and viewing conditions.  
Noise reduction diminishes artifacts such as “blockiness” or “pixellation”. When  
activated, the resulting picture usually has softer edges.  
To change the picture mode:  
To adjust the noise reduction setting:  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Picture and press OK.  
1. Press the OK button on the remote.  
The on-screen menu is displayed.  
3. Use the Arrow buttons to highlight Picture Mode and press  
OK.  
2. Use the Arrow buttons to highlight  
Picture and press OK.  
4. Use the Arrow buttons to highlight one of the following options, then press  
OK:  
3. Use the Arrow buttons to highlight  
Noise Reduction and press  
OK.  
•
•
•
•
•
Home - Sets the various picture settings to values that will produce the  
best picture in the most cases. This is the recommended setting.  
Movie - Sets the picture settings to values perfect for watching a movie  
in a dark room.  
4. Use the Arrow buttons to highlight Off,  
Low, Medium, or High, then press  
OK.  
Game - Optimizes the picture settings for displaying game console  
output.  
Retail - Sets the picture settings to values that produce a brighter,  
more vivid picture.  
5. Press EXIT.  
Custom - Allows you to manually change each of the picture settings:  
Backlight - Adjusts the LED brightness to affect the overall  
brilliance of the picture. This option is not available unless Ambient  
Light Sensor is set to Off.  
Brightness - Adjusts the black level of the picture. When this  
setting is too low, the picture may be too dark to distinguish details.  
When this setting is too high, the picture may appear faded or  
washed out.  
Contrast - Adjusts the white level of the picture. When this setting  
is too high, the picture may appear dark. When this setting is too  
low, the picture may appear faded or washed out. If the setting is  
too high or too low, detail may be difficult to distinguish in dark or  
bright areas of the picture.  
Color - Adjusts the intensity of the picture colors.  
Tint - Adjusts the hue of the picture. This setting is useful in  
adjusting the flesh tones in the picture. If flesh appears too orange,  
reduce the level of color before adjusting tint.  
Sharpness - Adjusts the edge sharpness of picture elements. It can  
be used to sharpen non-HD (high definition) content; however, it will  
not produce detail that does not otherwise exist.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
 
E321MV  
6
Adjusting the Color Temperature  
Enabling or Disabling Color Enhancement  
Color temperature changes the “warmness” or “coolness” of the white areas of  
the picture.  
Color enhancement reduces oversaturation of some colors and improves flesh  
tones.  
To adjust this setting, Picture Mode must be set to Custom.  
To adjust the color temperature setting:  
To adjust this setting, Picture Mode must be set to Custom.  
To enable or disable the color enhancement setting:  
1. Press the OK button on the remote.  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Picture and press OK.  
3. Use the Arrow buttons to highlight More and press OK.  
4. Use the Arrow buttons to highlight Color Enhancement.  
5. Use the Left/Right Arrow buttons to change the setting to Off or On.  
6. Press EXIT.  
The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight  
Picture and press OK.  
3. Use the Arrow buttons to highlight  
More and press OK.  
4. Use the Arrow buttons to highlight  
Color Temperature and press OK.  
Select Normal, Cool, Warm, or  
Custom.  
Enabling or Disabling Adaptive Luma  
Adaptive luma adjusts the average brightness of the picture to compensate for  
large areas of brightness.  
If you choose Custom, you can  
change the individual Red, Blue, and  
Green gain settings.  
To adjust this setting, Picture Mode must be set to Custom.  
5. When you are finished, press EXIT.  
To enable or disable the adaptive luma setting:  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Picture and press OK.  
3. Use the Arrow buttons to highlight More and press OK.  
4. Use the Arrow buttons to highlight Adaptive Luma.  
5. Use the Left/Right Arrow buttons to change the setting to Off or On.  
6. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
 
E321MV  
6
Enabling or Disabling DCR (Dynamic Contrast Ratio)  
Using the Parental Controls  
Dynamic contrast ratio changes contrast according to displayed content for the  
best picture quality.  
The TV’s parental controls allow you to prevent the TV from displaying certain  
channels or programs without a password.  
To adjust this setting, Picture Mode must be set to Custom.  
Accessing the Parental Controls Menu  
To access the Parental Controls menu:  
To enable or disable the DCR setting:  
1. Press the MENU button on the remote. The on-screen menu is displayed.  
1. Press the OK button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons to highlight Picture and press OK.  
3. Use the Arrow buttons to highlight More and press OK.  
4. Use the Arrow buttons to highlight DCR.  
2. Use the Arrow buttons on the remote to highlight Parental and press OK.  
3. Enter your parental passcode. If you have not set a passcode, enter the  
default, 0000. The Parental Controls menu is displayed.  
To set a custom parental passcode, see Changing the Parental  
Control Passcode on page 30.  
5. Use the Left/Right Arrow buttons to change the setting to Off or On.  
6. Press EXIT.  
Enabling or Disabling Program Ratings  
Resetting the Picture Settings  
To manage program content according to its rating, you must enable the Program  
Rating feature.  
To restore the TV’s picture settings to the factory defaults:  
To enable or disable the Program Rating feature:  
1. Press the OK button on the remote.  
The on-screen menu is displayed.  
1. From the Parental Controls menu, highlight Rating Enable and press OK.  
The Rating Enable menu is displayed.  
2. Use the Arrow buttons to highlight  
Picture and press OK.  
2. Select On or Off and press OK.  
3. Use the Arrow buttons to highlight  
More and press OK.  
4. Use the Arrow buttons to highlight  
Reset Picture Mode, then press OK.  
5. Use the Arrow buttons to highlight  
YES and press OK.  
6. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
 
E321MV  
6
Locking and Unlocking Channels  
Blocking and Unblocking Content by Rating  
When a channel is locked, it will be inaccessible. Locking a channel is a good way  
to prevent children from viewing inappropriate material.  
A channel may sometimes broadcast programs that are meant for children, and  
at other times broadcast programs that are meant for mature audiences. You may  
not want to block the channel completely using a channel lock, but you may wish  
to block certain programs from being viewed.  
To lock or unlock a channel:  
1. From the Parental Controls menu,  
highlight Channel Locks and press  
OK. The Channel Locks menu is  
displayed.  
When this is the case, you can use the TV’s Rating Block feature to block content  
based on its rating.  
For a list of content ratings and their definitions, visit  
www.tvguidelines.org.  
2. Highlight the channel you want to lock  
or unlock and press OK.  
To block or unblock content by its rating:  
3. When a channel is locked, the Lock  
icon appears locked. The channel  
is not accessible unless the parental  
passcode is entered.  
1. From the Parental Controls menu, highlight the content type you want to  
adjust and press OK:  
USA - TV - USA television program broadcasts.  
4. When a channel is unlocked, the Lock  
icon appears unlocked. The channel is  
accessible.  
USA - Movie - USA movie broadcasts.  
CAN - English - Canadian English television program broadcasts.  
CAN - French - Canadian French television program broadcasts.  
2. For each rating type you want to block or unblock, use the Up/Down and  
Left/Right Arrow buttons on the remote to highlight the rating type and  
press OK.  
3. When the rating type is blocked, the Lock icon appears locked. Content  
with this rating cannot be viewed.  
4. When the rating type is unblocked, the Lock icon appears unlocked.  
Content with this rating can be viewed.  
5. If you want to block all unrated content, highlight Block Unrated Shows  
and use the Arrow buttons on the remote to select On.  
6. When you are finished adjusting the rating level blocks, press the EXIT  
button on the remote.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
 
E321MV  
6
Setting the TV Button Locks  
Resetting the Content Locks  
To reset the content locks to the factory-default settings:  
WARNING: If you set User Control Lock to On and you lose your  
TV’s remote control, you will be unable to use the buttons on the TV.  
Please use caution when setting this lock.  
1. From the Parental Controls menu, highlight More and press OK. The  
Change PIN menu is displayed.  
2. Highlight RESET LOCKS and press OK. The TV displays, “Are you sure  
You can lock the buttons on the side of the TV so that the TV can only be controlled  
by the remote.  
you want to RESET ALL LOCKS SETTINGS to the factory defaults?”  
3. Highlight Yes and press OK.  
To lock or unlock this setting:  
1. From the Parental Controls menu, highlight User Control Lock and press  
OK.  
2. Highlight Off or On and press OK.  
When this setting is On, the buttons on the side of the TV will not function.  
When this setting is Off, the buttons on the side of the TV will function.  
3. Press Exit.  
Changing the Parental Control Passcode  
If you use the parental controls, you should change the passcode to prevent  
children from accessing inappropriate material.  
1. From the Parental Controls menu, highlight More and press OK.  
2. Highlight Change PIN and press OK. The Change PIN menu is displayed.  
3. In the New Pin field, use the Number Pad on the remote to enter your new  
4-digit parental control passcode. If you have not yet set a passcode, enter  
the default, 0000.  
4. In the Confirm Pin field, use the Number Pad on the remote to re-enter  
your new 4-digit parental control passcode.  
5. Write down your new parental control passcode and save it in a secure  
location.  
6. Press the EXIT button on the remote.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
   
E321MV  
6
Restarting the Setup Wizard  
Viewing System Info and Resetting to Factory Defaults  
The TV’s Setup App can be used to easily set up the TV tuner.  
You can use the TV’s Help menu to:  
To access the Setup App:  
•
•
•
Display system information  
1. Press the MENU button on the remote. The on-screen menu is displayed.  
Restore the TV to its factory default settings  
Restart the Setup Wizard  
2. Use the Arrow buttons on the remote to highlight the Help icon and press  
OK. The Help menu is displayed.  
Displaying System Information  
3. Highlight Start Setup Wizard and press OK.  
To display a summary of the TV settings:  
4. Use the Number Pad to enter your parental PIN. If you have not yet set  
1. Press the MENU button on the remote. The on-screen menu is displayed.  
your PIN, enter 0000.  
2. Use the Arrow buttons on the remote to highlight the Help icon and press  
5. The TV displays, “Are you sure you want to RESET SETUP WIZARD?”  
OK. The Help menu is displayed.  
Highlight OK and press OK.  
3. Highlight System Info and press OK. The system information is displayed.  
4. When you are finished reviewing the system information, press the EXIT  
button on the remote.  
Restoring the TV to the Factory Default Settingss  
All of the on-screen menu settings can be reset to the factory defaults.  
If you restore the TV to the factory default settings, all changes you  
have made to the settings will be lost!  
To restore the TV to its factory default settings:  
1. Press the MENU button on the remote. The on-screen menu is displayed.  
2. Use the Arrow buttons on the remote to highlight the Help icon and press  
OK. The Help menu is displayed.  
3. Highlight Reset All Settings and press OK.  
The TV displays, “Are you sure you would like to Restore Defaults? This will  
erase any custom settings.”  
4. Highlight Yes and press OK.  
5. Press EXIT.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
 
E321MV  
6
Changing the Appearance of Digital Closed Captions  
Setting Up Closed Captioning  
Digital closed captions can be displayed according to your preference.  
Your TV can display closed captions for programs that include them. Closed  
captions display a transcription of a program’s dialogue.  
To change the appearance of digital closed captions:  
1. From the Closed Caption menu, use  
the Arrow buttons to highlight Digital  
Caption Style.  
If the program you are viewing is not being broadcast with closed  
captions, the TV will not display them.  
2. Use the Left/Right Arrow buttons on  
the remote to select Custom, then  
press OK. The Digital CC Style menu  
appears.  
To activate or deactivate closed captions:  
1. Press the MENU button on the remote.  
The on-screen menu is displayed.  
3. Use the Up/Down Arrow buttons on  
the remote to highlight the setting you  
wish to change, then use the Arrow  
buttons to change the setting:  
2. Use the Arrow buttons on the remote  
to highlight the CC icon and press OK.  
The Closed Caption menu is displayed.  
3. Use the Arrow buttons on the remote  
to highlight the type of closed captions  
you wish to see:  
•
•
•
•
•
•
•
•
•
Caption Style - Choose a custom  
preset caption style.  
Text Size - Adjust the size of the  
text.  
•
Analog Closed Caption for  
analog (NTSC) TV channels.  
Color - Change the color of the  
text.  
•
Digital Closed Caption for  
digital (ATSC) TV channels.  
Opacity - Change the  
transparency of the text.  
4. After highlighting the type of closed  
captions you wish to see, use the  
Arrow buttons on the remote to  
select the caption channel you wish to  
display, then press OK.  
BG Color - Change the  
background color.  
BG Opacity - Change the  
transparency of the background.  
Window Color - Change the edge  
color.  
Caption channels usually display different languages. For example,  
CC1 may display English captions and CC2 may display Spanish  
captions.  
Window Opacity - Change the  
edge type.  
Reset Default - Restore closed  
caption settings to factory defaults  
4. When you are satisfied with the appearance of the closed  
captions, press the EXIT button on the remote.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
 
Troubleshooting & Technical Support  
A
Products are often returned due to a technical problem rather than due to a  
defect. If you are experiencing a problem when using your TV, try to fix the issue  
using this troubleshooting guide.  
There is no sound.  
•
•
•
•
•
Press Volume Up on the remote control.  
Press the MUTE button on the remote to ensure mute is off.  
Check the audio settings. Ensure the speakers are set to On.  
Ensure no headphones are connected to the TV.  
If, after using this troubleshooting guide, you are still experiencing an issue with  
your TV, contact VIZIO’s Support Department. Quality customer support and  
service are integral parts of VIZIO’s commitment to service excellence.  
Check the audio connections of external devices (Blu-ray player,  
game console, cable/satellite box) that are connected to the TV.  
Phone: (877) 698-4946  
Web: www.VIZIO.com  
Fax:  
(949) 585-9563  
Hours of operation:  
•
If you are using an antenna, the signal strength of the channel may be  
low. Ensure your antenna is connected securely to the TV and move  
the antenna around the room or close to a window for the best signal.  
Email:  
[email protected]  
Monday - Friday: 6 am to 9 pm (PST)  
Saturday - Sunday: 8 am to 4pm (PST)  
The colors on the TV don’t look right.  
•
Adust the Color and Tint settings in the Picture menu. See Scanning  
for Channels on page 13.  
•
•
Reset the picture settings.  
The TV displays “No Signal.”  
Check all cables to ensure they are securely attached.  
•
Press the INPUT button on the remote control to select a different  
input source.  
The buttons on the remote aren’t working.  
•
If you are using cable TV, satellite, or antenna connected directly to  
the TV, scan for channels. See Scanning for Channels on page 13.  
•
•
•
Ensure you are only pressing one button at a time.  
Point the remote directly at the TV when pressing a button.  
There is no power.  
Replace the remote batteries with new ones. See Replacing the  
Batteries on page 7.  
•
•
•
Ensure the TV is plugged into a working electrical outlet.  
Ensure the power cable is securely attached to the TV.  
Press the Power/Standby button on the remote or press the Power/  
Standby button on the side of the TV to turn the TV on.  
The image quality is not good.  
•
For the best image quality, view high-definition programs using digital  
sources. Connect your devices with HDMI cables.  
The power is on, but there is no image on the screen.  
•
If you are using an antenna, the signal strength of the channel may be  
low. Ensure your antenna is connected securely to the TV and move  
the antenna around the room or close to a window for the best signal.  
•
•
Ensure all cables are securely attached to the TV.  
Ensure all devices are connected correctly. Devices differ; see your  
device’s user manual for details.  
•
•
Adjust Brightness, Contrast, or Backlight. See Scanning for Channels  
on page 13.  
Press the INPUT button on the remote to select a different input  
source.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
 
E321MV  
A
The picture is distorted.  
When I change input source, the display image changes size.  
•
Nearby electrical devices may be interfering with the TV. Separate the  
TV from electrical appliances, cars, or flourescent lights.  
•
The TV remembers the viewing mode on each input source. If the  
viewing mode on the new input source differs from the one on the  
input source you switch from, the difference may be noticable.  
•
Ensure all cables are securely attached.  
•
See Viewing a USB Photo Slideshow on page 19.  
The display image does not cover the entire screen.  
•
If you are in RGB mode (computer), ensure that H-Size and V-Position  
in the on-screen menu are set correctly.  
•
If you are using TV, AV1, AV2, or Component with 480i input, press  
the WIDE button on the remote to change the screen mode.  
The TV has pixels (dots) that are always dark or always lit.  
•
Your HDTV is precision-manufactured using an extremely high level  
of technology. However, sometimes pixels may not display correctly.  
These types of occurences are inherent to this type of product and do  
not constitute a defective product.  
I see “noise” or static on the screen.  
•
When your TV’s digital capabilities exceed a digital broadcast signal,  
the signal is up-converted (improved) to match your TV’s display  
capabilities. This up-converting can sometimes cause irregularities in  
the image.  
•
If you are using an antenna, the signal strength of the channel may be  
low. Ensure your antenna is connected securely to the TV and move  
the antenna around the room or close to a window for the best signal.  
When I change input source, the volume changes.  
•
The TV remembers the volume level on each input source. If the  
volume level on the new input source is higher or lower than the level  
on the source you switch from, the difference may be noticable.  
•
Use the Volume Up/Down buttons on the remote to adjust the  
volume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
 
Specifications  
B
Screen Size:  
32” Class  
31.50”  
Sound Leveler:  
SRS TruVolume  
Yes  
Diagonal Viewable:  
Ambient Light Sensor:  
Dimensions w/ Stand:  
w/o Stand:  
30.39 x 20.79 x 6.34”  
30.39 x 19.21 x 2.13”  
Energy Star  
FCC Class B  
HDMI 1.3  
Compliance:  
Weight w/ Stand:  
w/o Stand:  
16.67 lbs  
14.66 lbs  
UL/CUL  
TV Type:  
Refresh Rate:  
Edge-Lit LED  
Power Consumption:  
Voltage Range:  
90W  
120~240 VAC @ 50/60 Hz  
<1W  
60 Hz  
Maximum Resolution:  
Pixel Pitch:  
1920 x 1080  
Standby Power:  
0.3635 mm x 0.3635 mm  
Operating Temperature:  
32° to 95° F  
Dynamic Contrast Ratio:  
Viewing Angle:  
100,000:1  
Non-Operating  
Temperature:  
-4° to 140° F  
178 (H) x 178 (V)  
Operating Humidity:  
10 - 90% (Relative, Non-condensing)  
10 - 70% (Relative, Non-condensing)  
Response Time:  
Brightness:  
8.5 ms  
Non-Operating Humidity:  
400 nits  
HDMI Inputs:  
3
Component Video Inputs:  
Composite Inputs:  
RF/Coaxial Input:  
USB Ports:  
1
1
1
1
RGB Inputs:  
1 (with 3.5mm Audio In)  
OSD Language:  
Audio Outputs:  
English, Spanish, French  
Optical Digital Audio Out, 3.5mm Stereo  
Number of Speakers  
Watts/Channel  
2
10W  
SRS TruSurround HD,  
Dolby Digital  
Simulated Surround:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
 
Limited Warranty  
C
maintenance are not covered. This one year limited warranty does not cover  
Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.  
ON PARTS AND LABOR  
Covers units purchased as new in United States and Puerto Rico Only.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR  
DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED  
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET  
FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND  
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S  
NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH  
DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE  
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE  
FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL  
LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR  
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS  
ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS  
OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH  
VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE  
WITHOUT NOTICE.  
VIZIOprovidesawarrantytotheoriginalpurchaserofanewProductagainstdefects  
in materials and workmanship for a period of one (1) year of non-commercial usage  
and ninety (90) days of commercial use. If a Product covered by this warranty is  
determined to be defective within the warranty period, VIZIO will either repair or  
replace the Product at its sole option and discretion.  
To obtain warranty service, contact VIZIO Technical Support via e-mail:  
Te[email protected] or via phone at 877 MY VIZIO (877.698.4946) from  
6:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM Saturday and  
Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE  
OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER.  
Proof of purchase in the form of a purchase receipt or copy thereof is required to  
show that a Product is within the warranty period.  
Parts and Labor  
There will be no charge for parts or labor during the warranty period. Replacement  
parts and Products may be new or recertified at VIZIO’s option and sole discretion.  
Replacement parts and Products are warranted for the remaining portion of the  
original warranty or for ninety (90) days from warranty service or replacement,  
whichever is greater.  
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.  
Personal Data  
If your VIZIO product is capable of storing personal data and other information, ALL  
CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME  
IN-HOME AND ALL SHIP-IN WARANTY SERVICE. If this occurs, your product will  
be restored to you configured as originally purchased. You will be responsible for  
restoring all applicable data and passwords. Recovery and reinstallation of user  
data is not covered under this Limited Warranty. In order to protect your personal  
information, VIZIO recommends that you always clear all personal information  
from the unit before it is serviced, regardless of the servicer.  
Type of Service  
Defective Products must be sent to a VIZIO service center to obtain warranty  
service. VIZIO is not responsible for transportation costs to the service center,  
but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS  
REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER  
FOR WARRANTY SERVICE.  
Product returns to VIZIO’s service centers must utilize either the original carton  
box and shipping material or packaging that affords an equal degree of protection.  
VIZIO Technical Support will provide instructions for packing and shipping the  
covered Product to the VIZIO service center.  
Zero Bright Pixel Defect Guarantee  
This policy covers “zero bright pixel” defects for the duration of the limited  
“ONE YEAR WARRANTY” on select new product purchases. To determine if  
this guarantee applies to your product, refer to the “DETAILS” tab of the model’s  
product information page (www.VIZIO.com) or look for the “zero bright pixel”  
guarantee on the box.  
Limitations and Exclusions  
VIZIO’s one-year limited warranty only covers defects in materials and  
workmanship. This warranty does not cover, for example: cosmetic damage,  
normal wear and tear, improper operation, improper voltage supply or power  
surges, signal issues, damages from shipping, acts of God, any type of customer  
misuse, modifications or adjustments, as well as installation and set-up issues  
or any repairs attempted by anyone other than by a VIZIO authorized service  
center. Products with unreadable or removed serial numbers, or requiring routine  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
 
Legal & Compliance  
D
FCC Class B Radio Interference Statement  
Caution  
NOTE: This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses and can radiate radio  
frequency energy, and if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following measures:  
Always use an AC/DC power adapter that is properly grounded. Use the AC cords  
listed below for each area.  
USA: UL  
Canada: CSA  
Germany: VDE  
UK: BASE/BS  
Japan: Electric Appliance Control Act  
Open Source Software Notice  
Your VIA device may contain GPL executables and LGPL libraries that are subject  
to the PL2.0/LGPL2.1 License Agreements. VIZIO offers to provide source code  
to you on CD-ROM for a processing fee covering the cost of performing such  
distribution, such as the cost of media, shipping and handling upon request made  
to VIZIO at www.VIZIO.com.  
1. Reorient or relocate the receiving antenna.  
2. Increase the separation between the equipment and receiver.  
3. Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
This offer is valid for a period of three (3) years from the date of the distribution of  
this VIA device by VIZIO.  
4. Consult the dealer or an experienced radio/TV technician for help.  
You can obtain a copy of the GPL, LGPL licenses from:  
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html  
and  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that  
may cause undesired operation.  
http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html  
You can also obtain a copy of gSOAP public license from:  
http://www.cs.fsu.edu/~engelen/license.html  
Notice  
1. The changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate  
the equipment.  
Please visit www.VIZIO.com for attribution of copyrights to any open source  
software on your VIZIO VIA device.  
2. Shielded interface cables and AC power cord, if any, must be used in  
order to comply with the emission limits.  
Permission is hereby granted, free of charge, to any person obtaining a copy of any  
such software and associated documentation files (the “Open Source Software”),  
to deal in the Open Source Software without restriction, including without limitation  
the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell  
copies of the Open Source Software, and to permit persons to whom the Open  
Source Software is furnished to do so, subject to the following conditions:  
3. The manufacturer is not responsible for any radio or TV interference  
caused by unauthorized modification to this equipment. It is the  
responsibilities of the user to correct such interference.  
FCC warning  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,  
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONIN-  
FRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN  
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR  
IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS  
IN THE SOFTWARE.  
Changes or modifications not expressly approved by the party responsible for  
compliance with the FCC Rules could void the user’s authority to operate this  
equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
 
Notes  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2011. All rights reserved. the v, viZiO, viZiO internet Apps, theAter 3d, Full ArrAy truled, edge lit rAZOr led, 240hZ sps, 480hZ sps,  
entertAinment FreedOm And entertAinment FreedOm FOr All nAmes, lOgOs And phrAse Are registered Or unregistered trAdemArks  
OF viZiO, inc. Other lOgOs And trAdemArks Are the prOperty OF their respective OWners. subject tO chAnge WithOut nOtice.  
110307st-nc  
Download from Www.Somanuals.com. All Manuals Search And Download.  

TeleAdapt CD Player KD G721 User Manual
The Singing Machine Drums SMI 1452 User Manual
THORENS Stereo Amplifier MM 005 User Manual
Tiffen Camcorder Accessories Pro SQ User Manual
Toshiba Projector TLPX10E User Manual
Tripp Lite Switch B030 002 R User Manual
True Fitness Treadmill LC1100 User Manual
Universal Smoke Alarm CD 9795 User Manual
Waves Network Card IR 1 User Manual
Weber Gas Grill 56203 User Manual