VIZIO
QUICK START GUIDE
Model: E320-B1
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEVISION ANTENNA CONNECTION PROTECTION
Ground Clamp
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
(NEC ART 250, part H)
Electric Service Equipment
• If an outside antenna/satellite dish or cable system is to be connected to
the TV, make sure that the antenna or cable system is electrically grounded
to provide some protection against voltage surges and static charges.
• Lightning Protection: For added protection of the TV during a lightning
storm or when it is left unattended or unused for long periods of time,
unplug the TV from the wall outlet and disconnect the antenna or cable
system.
• Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit,
size of the grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements of the grounding
electrode.
• Power Lines: Do not locate the antenna near overhead light or power
circuits, or where it could fall into such power lines or circuits. Remember,
the screen of the coaxial cable is intended to be connected to earth in the
building installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Do You Have Questions? Find Answers At
SUPPORT.VIZIO.COM
Find help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• Product Updates
• And More
Live Chat
Support Available
Your can also contact our
award-winning support team at:
Phone: (877) 878-4946 (TOLL-FREE)
techsupport@VIZIO.com
Email:
Hours Of Operation:
Monday - Friday: 5 am TO 8 pm (pST)
Saturday - Sunday: 7 am TO 4 pm (pST)
Download from Www.Somanuals.com. All Manuals Search And Download.
DOWNLOAD THE FULL USER MANUAL
1
2
Page shown is for illustrative purposes only. Actual page content will vary.
Help VIZIO reduce paper waste.
You can download the Full User Manual under the
Product Downloads section of the Support tab.
Download the Full User Manual for your TV.
Using a computer, navigate to:
Enter the model number of the TV in the
space above.
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
MENU
OK
BACK
VOL
VOL
C
H
C
H
2
5
8
0
VIZIO LED HDTV with Stand
Remote Control
with Batteries
This Quick Start Guide
Power Cord
3 x T4 16mm
Phillips Screws
3 x M4 12mm
Phillips Screws
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE
INPUT
Change the currently-displayed input.
POWER
Turn TV on or off.
EXIT
MENU
Close the on-screen menu.
MENU
Display the on-screen menu.
OK
ARROW
Select the highlighted menu option.
OK
Navigate the on-screen menu.
BACK
BACK
GUIDE
Go to the previous on-screen menu.
Display the info window.
VOLUME UP/DOWN
Increase or decrease loudness of
the audio.
H
C
V BUTTON
Open the USB media player.
V
O
L
H
C
V
O
L
CHANNEL UP/DOWN
MUTE
Change the channel.
Turn the audio off or on.
2
5
8
0
LAST
NUMBER PAD
Return to the channel last viewed.
Manually enter a channel.
DASH
WIDE
Use with the number pad
to manually enter a digital
sub-channel.
Change the display mode.
(For example, 18-4 or 18-5.)
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE BASE
1
Place the TV screen-down on a clean, flat surface.To prevent scratches or damage to
the screen, place the TV on a soft surface such as a blanket.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Align the neck piece with the bottom of the TV
Align the base with the neck and
tighten the three (3) T4 16mm screws
using a Phillips screwdriver.
and slide it into place as shown.
Using a Phillips screwdriver, tighten
the three (3) M4 12mm screws into the center
of the neck piece to secure it to the TV.
Place the TV on a flat, stable surface.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING YOUR DEVICES
Connect all of your devices first.
1
Choose ONE connection type for each device.
Match colored connectors
to colored ports.
BACK OF TV
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI CABLE*
• DIGITAL
• HD VIDEO (1080p)**
• HD AUDIO
Commonly-Connected
Devices:
BEST
COMPONENT CABLE*
• ANALOG
• HD VIDEO (1080i)**
• STEREO AUDIO
BETTER
Cable or Satellite Boxes
Blu-ray™ or DVD Players
Match colored connectors to colored ports.
COAXIAL CABLE*
• ANALOG
• HD VIDEO (1080i)**
• STEREO AUDIO
BETTER
AV CABLE*
• ANALOG
• VIDEO (480i)**
• STEREO AUDIO
GOOD
Game Consoles
Match colored connectors to colored ports.
Download from Www.Somanuals.com. All Manuals Search And Download.
* Cables are not included
** Maximum Resolution
3
2
Remove the battery cover by pressing gently on
the V logo and sliding away from the remote.
Connect the power cord to the back of the TV.
The flat edge of the connector goes toward the
outside of the TV.
Insert the included batteries.
Plug the power cord into an electrical outlet.
Gently slide the battery cover back into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Turn the TV on by pressing the
Power button on the remote.
Follow the on-screen instructions to complete
the first-time setup.
The Setup App is displayed.
Use the Arrow buttons on the remote to
highlight Home Use and press OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
HELP TOPICS
•
•
The on-screen menu has guided setup. Press MENU > Guided Setup. Select
the type of setup you need and press OK.The Setup App begins.
To reset the TV to factory defaults, press MENU > System > Reset & Admin >
Reset TV to Factory Defaults. If you set a Parental Control Passcode, enter it
now. Select Reset. Remember that all of your settings will be lost.
How do I return to the
Setup App?
•
•
•
Press the VOLUME UP button on the remote.
Press the MUTE button on the remote to ensure that mute is off.
Press MENU, then select Audio. Be sure TV Speakers is set to On.
There is a picture, but
there is no sound.
•
•
Be sure your connected devices are turned on.
Press the INPUT button on the remote and select the input to which your device is
connected (TV, HDMI-1, COMP, etc.).
The TV displays
“No Signal.”
There are black/
gray bars on the top/
bottom/sides of the
screen.
•
•
Note that some television channels add black bars to the picture.
Set the TV image mode so that the picture fills the screen. Press the WIDE button on
the remote until the screen is filled, and then press OK.
•
Adjust the video settings of your external device.
•
Be sure the power cord is securely connected to the AC socket on the TV and to a
working electrical outlet.
There is no power.
•
•
Press the POWER button on the remote.
If the above steps do not work, try plugging the power cord into a different outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
LEGAL
/
COMPLIANCE
FCC Class B Radio Interference Statement
Notice
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such interference.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules
could void the user’s authority to operate this equipment.
Caution
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for
each area.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
USA: UL
Germany:VDE
UK: BASE/BS
Japan: Electric Appliance Control Act
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Canada: CSA
Image(s) under license from Shutterstock.com.
LIMITED WARRANTY
ON PARTS AND LABOR
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES
AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE,
OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES,SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TOYOU.THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,AND YOU MAY ALSO HAVE OTHER RIGHTS,WHICH VARY FROM STATE TO
STATE.THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship
for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use.If a Product covered
by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the
Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via e-mail: [email protected] or via phone at
877 MY VIZIO (877.698.4946) from 5:00AM to 8:00PM Monday through Friday and 7:00AM to 4:00PM Saturday and
Sunday,PacificTime,or visit www.VIZIO.com.PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT
TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show
that a Product is within the warranty period.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
Parts and Labor
If your VIZIO product is capable of storing personal data and other information,ALL CONTENTS AND INFORMATION
WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product
will be restored to you configured as originally purchased.You will be responsible for restoring all applicable data
and passwords. Recovery and reinstallation of user data is not covered under this Limited Warranty. In order to
protect your personal information,VIZIO recommends that you always clear all personal information from the unit
before it is serviced, regardless of the servicer.
There will be no charge for parts or labor during the warranty period.Replacement parts and Products may be new
or recertified atVIZIO’s option and sole discretion.Replacement parts and Products are warranted for the remaining
portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for
transportation costs to the service center,but VIZIO will cover return shipping to the customer.PRE-AUTHORIZATION IS
REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Zero Bright Pixel Defect Guarantee
This policy covers “zero bright pixel” defects for the duration of the limited “ONE YEAR WARRANTY” on select new
product purchases.To determine if this guarantee applies to your product, refer to the “DETAILS” tab of the model’s
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or
packaging that affords an equal degree of protection.VIZIO Technical Support will provide instructions for packing
and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship.This warranty does not cover,for
example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges,
signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as
well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service
center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered.
This one year limited warranty does not cover Products sold “AS IS”,“FACTORY RECERTIFIED”, or by a non-authorized
reseller.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2014 VIZIO INC.ALL RIGHTS RESERVED.
140131OC-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|