|
Copyright
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright January, 2008
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no repre-
sentations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pend-
ing applications in other countries throughout the world.
All other product names used in this manual are the properties of their respective owners and are ac-
knowledged.
— i —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Power Safety
¾
¾
Only use the supplied power cord.
Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
¾
Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 31
for clear and safe instructions for this procedure. Before replacing the lamp:
¾
¾
Unplug the power cord.
Allow the lamp to cool for about one hour.
Cleaning the Projector
¾
¾
Unplug the power cord before cleaning. See Cleaning the Projector on page 34.
Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance section
on page 46.
– iii –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Main Features
•
•
•
•
•
•
Lightweight unit, easy to pack away and transport.
Compatible with all major video standards including NTSC, PAL, and SECAM.
A high brightness rating allows for presentations in daylight or in lit rooms.
Supports resolutions up to UXGA at 16.7 million colors to deliver crisp, clear images.
Flexible setup allows for front, rear projections.
Line-of-vision projections remain square, with advanced keystone correction for angled
projections.
•
Input source automatically detected.
About this manual
This manual is intended for end users and describes how to install and operate the DLP projector. Wher-
ever possible, relevant information—such as an illustration and its description—has been kept on one
page. This printer-friendly format is both for your convenience and to help save paper, thereby protecting
the environment. It is suggested that you only print sections that are relevant to your needs.
— iv —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Table of Contents
GETTING STARTED.......................................................................................................................................................... 1
PACKING CHECKLIST........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS............................................................................................................................................... 2
Front-right View ............................................................................................................................................................. 2
Top view—On-screen Display (OSD) buttons and LEDs ............................................................................................... 3
Rear view ........................................................................................................................................................................ 4
Bottom view..................................................................................................................................................................... 5
REMOTE CONTROL PARTS ................................................................................................................................................... 6
REMOTE CONTROL OPERATING RANGE............................................................................................................................... 8
PROJECTOR AND REMOTE CONTROL BUTTONS.................................................................................................................... 8
Remote Control............................................................................................................................................................... 8
SETUP AND OPERATION................................................................................................................................................. 9
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................... 9
CONNECTING INPUT DEVICES............................................................................................................................................ 10
STARTING AND SHUTTING DOWN THE PROJECTOR............................................................................................................. 11
SETTING AN ACCESS PASSWORD (SECURITY LOCK).......................................................................................................... 13
ADJUSTING THE PROJECTOR LEVEL................................................................................................................................... 15
ADJUSTING THE ZOOM, FOCUS AND KEYSTONE ................................................................................................................ 16
ADJUSTING THE VOLUME .................................................................................................................................................. 17
ON-SCREEN DISPLAY (OSD) MENU SETTINGS....................................................................................................... 18
OSD MENU CONTROLS ..................................................................................................................................................... 18
Navigating the OSD ...................................................................................................................................................... 18
SETTING THE OSD LANGUAGE .......................................................................................................................................... 19
OSD MENU OVERVIEW ..................................................................................................................................................... 20
OSD SUB-MENU OVERVIEW ............................................................................................................................................. 21
IMAGE MENU..................................................................................................................................................................... 22
Color Manager.............................................................................................................................................................. 23
COMPUTER MENU.............................................................................................................................................................. 24
VIDEO/AUDIO MENU ......................................................................................................................................................... 25
INSTALLATION I MENU...................................................................................................................................................... 26
INSTALLATION II MENU..................................................................................................................................................... 27
OSD Menu Setting......................................................................................................................................................... 28
Peripheral Test.............................................................................................................................................................. 29
Lamp Hour Reset .......................................................................................................................................................... 29
Factory Reset ................................................................................................................................................................ 30
Status............................................................................................................................................................................. 30
MAINTENANCE AND SECURITY................................................................................................................................. 31
REPLACING THE PROJECTION LAMP................................................................................................................................... 31
Resetting the Lamp........................................................................................................................................................ 33
CLEANING THE PROJECTOR................................................................................................................................................ 34
Cleaning the Lens ......................................................................................................................................................... 34
Cleaning the Case......................................................................................................................................................... 34
®
USING THE KENSINGTON LOCK ....................................................................................................................................... 35
TROUBLESHOOTING ..................................................................................................................................................... 36
COMMON PROBLEMS AND SOLUTIONS ............................................................................................................................... 36
TIPS FOR TROUBLESHOOTING ............................................................................................................................................ 36
LED ERROR MESSAGES..................................................................................................................................................... 37
IMAGE PROBLEMS.............................................................................................................................................................. 37
LAMP PROBLEMS ............................................................................................................................................................... 38
REMOTE CONTROL PROBLEMS .......................................................................................................................................... 38
AUDIO PROBLEMS ............................................................................................................................................................. 38
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 38
SPECIFICATIONS............................................................................................................................................................. 39
– v –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
SPECIFICATIONS................................................................................................................................................................. 39
Input connectors............................................................................................................................................................ 39
PROJECTION DISTANCE V.S. PROJECTION SIZE.................................................................................................................. 40
TIMING MODE TABLE ........................................................................................................................................................ 41
PROJECTOR DIMENSIONS ................................................................................................................................................... 45
REGULATORY COMPLIANCE ..................................................................................................................................... 46
FCC WARNING.................................................................................................................................................................. 46
CANADA ............................................................................................................................................................................ 46
SAFETY CERTIFICATIONS................................................................................................................................................... 46
EN 55022 WARNING ......................................................................................................................................................... 46
— vi —
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
GETTING STARTED
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLP PROJECTOR
REMOTE CONTROL
(WITH ONE 3V CR2025 BATTERY)
RGB CABLE
POWER CORD
RGB TO COMPONENT ADAPTER
(OPTIONAL)
CARRYING CASE
CD-ROM (THIS USER’S MANUAL)
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
Caution:
Avoid using the projector in dusty environments.
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Views of Projector Parts
Front-right View
ITEM
LABEL
Ventilation opening
Height-adjuster button
Height adjuster
Lens cap
DESCRIPTION
Do not block in order to keep the projector lamp cool
Push to release height adjuster
SEE PAGE:
1.
2.
3.
4.
5.
6.
7.
8.
15
6
Adjusts level of projector
Covers lens to protect when not in use
Receiver for IR signal from remote control
Remove lens cap before use
IR receiver
Lens
Focus ring
Focuses the projected image
16
3
Zoom ring
Enlarges the projected image
See Top view—On-screen Display (OSD) buttons and
LEDs.
Function keys
9.
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
– 2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Top view—On-screen Display (OSD) buttons and LEDs
SEE
PAGE:
ITEM
LABEL
DESCRIPTION
Turns the projector On or Off
1.
2.
(Power)
▲ (Up cursor)
Navigates and changes settings in the OSD
18
Green
Off
Power On
Power LED
3.
Power Off (AC Off)
Error code
Flashing
On
System over temperature
Normal State
Over Temp LED
Ready LED
Menu
4.
5.
Off
Orange
Lamp is ready to be powered-on.
Lamp not ready (Warm-up/shutting down/cooling)
(see LED Error Messages on page 37)
Flashing
Open and exits the OSD buttons
6.
7.
8.
9.
◄ (Left cursor)/
Source
Detects the input device
Navigates and changes settings in the OSD
18
16, 17, 18
18
▼ (Down cursor) /
Quick Menu
Quick Menu – For Keystone, Audio Volume
Navigates and changes settings in the OSD
► (Right cursor)/
Auto
Optimizes image size, position, and resolution
Navigates and changes settings in the OSD
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Rear view
ITEM
1.
LABEL
DESCRIPTION
Connect the POWER CABLE
SEE PAGE:
AC IN
USB
11
Connect the USB CABLE from a computer
2.
AUDIO
Connect the AUDIO CABLE from the input device
Connect the S-VIDEO CABLE from a video device
Connect the VIDEO CABLE from a video device
Connect the RGB cable (supplied) from a computer
3.
S-VIDEO
VIDEO
VGA
10
35
4.
5.
6.
Connect the HDMI digital video CABLE from a video
device
DIGITAL VIDEO
7.
(For D326WX only)
(Security Lock)
Secure to permanent object with a Kensington® Lock
8.
Note:
If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the
S-VIDEO connector. S-VIDEO provides a better quality signal.
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Bottom view
ITEM
LABEL
Lamp cover
DESCRIPTION
SEE PAGE:
Remove when changing the lamp.
1.
2.
3.
4.
5.
31
Lens cap hook
Place strap through to fasten the lens cap cover.
Rotate adjuster lever to adjust angle position.
Push to release adjustor.
Tilt adjustor
Height adjustor button
Height adjustor
15
Adjuster drops down when adjuster button is pushed.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Remote Control Parts
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluo-
rescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path be-
tween the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
ITEM
1.
LABEL
Up cursor
DESCRIPTION
SEE PAGE:
Navigates and changes settings in the OSD
Changes settings in the OSD
18
Enter
2.
Power
Turns the projector On or Off
3.
11
18
Right cursor
Volume +
Volume -
Mute
Navigates and changes settings in the OSD
Increase volume
4.
5.
17
Decrease volume
6.
Mutes the built-in speaker
7.
Freeze
Freeze/unfreezes the on-screen picture
Detects the input device
8.
Source
9.
Auto
Auto adjustment for frequency, tracking, size, position (RGB only)
Corrects image-trapezoid (wider top) effect
Corrects image trapezoid (wider bottom) effect
Navigates and changes settings in the OSD
Navigates and changes settings in the OSD
Opens the OSD
10.
11.
12.
13.
14.
15.
Keystone top
Keystone bottom
Down cursor
Left cursor
Menu
16
18
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and
15 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are lim-
ited in use. The following illustration shows the corresponding buttons on the remote control and on
the projector.
Remote Control
Some buttons on the projector have multiple functions. For example, item 3/6/7 on the projector func-
tions as the keystone button, volume adjuster, and as the down cursor key.
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP AND OPERATION
Inserting the Remote Control Batteries
Remove the battery compartment cover
by sliding the cover in the direction of
the arrow. (A) Pull out the cover. (B)
1.
Insert the battery with the positive side
facing up.
2.
Replace the cover.
3.
Caution:
1. Only use a 3V lithium battery (CR2025).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the battery when not using the projector for prolonged periods.
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Connecting Input Devices
A PC or notebook computer and video devices can be connected to the projector at the same time. Video
devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras.
Check the user manual of the connecting device to confirm it has the appropriate output connector.
ITEM
A
B
C
D
E
LABEL
DESCRIPTION
USB
Connect the USB CABLE from a computer.
Connect the AUDIO CABLE from the computer’s audio-out connector.
Connect the AUDIO CABLE (mini jack-to-RCA x 2) from a video device.
AUDIO
S-VIDEO
VIDEO
Connect the S-VIDEO CABLE from a video device.
Connect the VIDEO CABLE from a video device.
Connect the RGB CABLE from a computer.
VGA
Connect DVD input YCbCr / YPbPr, through optional RGB to
COMPONENT ADAPTOR.
Digital Video (HDMI)
Connect the Digital Video from any video device
(For D326WX only)
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Starting and Shutting down the Projector
Connect the power cord to the projector.
Connect the other end to a wall outlet.
1.
The
Power and Ready LEDs on the
projector light.
Turn on the connected devices.
2.
3.
Ensure the Ready LED displays a solid
orange and not a flashing orange. Then
press the
Power button to turn on
the projector.
The projector splash screen displays and
connected devices are detected.
See Setting an Access Password
(Security Lock) on page 13 if security
lock is enabled.
If more than one input device is con-
nected, press the Source button and use
▲▼ to scroll among devices.
4.
(Component is supported through the
RGB to COMPONENT ADAPTER.)
•
RGB: Analog RGB
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector
•
•
•
Composite Video: Traditional composite video
S-Video: Super video (Y/C separated)
Digital Video (HDMI): Digital Video source
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
When the “Power Off? /Press Power
again” message appears, press the Pow-
5.
er button. The projector turns off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until the Ready LED stops flashing–indicating the projector has
cooled down.
– 12 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.
When enabled, the password must be entered after you power on the projector. (See Navigating the
OSD on page 18 and Setting the OSD Language on page 19 for help on using OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your reseller for information on clearing the password.
Press the Menu button to open the OSD
menu.
1.
Press the cursor ◄► button to move to
the Installation I menu.
2.
Press the cursor ▲▼ button to select
Security Lock.
3.
Press the cursor ◄► button to enable or
disable security lock function.
4.
A password dialog box automatically
appears.
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
You can use the cursor buttons ▲▼◄►
either on keypad or IR remote control for
password entry. You can use any
5.
combination including the same arrow five
times, but not less than five.
Press the cursor buttons in any order to set
the password. Push the Menu button to
exit the dialog box.
The password confirm menu appears when
user presses the power-on key in case the
Security Lock is enabled.
6.
Enter the password in the order you set it
at step 5. In case you forget the password,
please contact the service center.
Service center will validate the owner and
help reset the password.
– 14 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
•
•
•
The projector table or stand should be level and sturdy.
Position the projector so that it is perpendicular to the screen.
Ensure the cables are in a safe location. You could trip over them.
To raise the level of the projector, lift the projector [A] and press the height-adjuster
button [B].
1.
The height adjuster drops down [C].
To lower the level of the projector, press the height-adjuster button and push down
on the top of the projector.
2.
3.
To adjust the angle of the picture, turn the tilt-adjuster [D] right or left until the
desired angle has been achieved.
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Adjusting the Zoom, Focus and Keystone
Use the Image-zoom
1.
control (on the projector
only) to resize the pro-
jected image and screen
B
size
.
Use the Image-focus
control (on the projector
only) to sharpen the pro-
2.
3.
A
jected image
.
Use the Quick Menu but-
ton on the projector or
Keystone on the remote
control to correct image-
trapezoid (wider top or
bottom) effect.
Remote control and OSD panel
The keystone control
appears on the display.
4.
– 16 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Adjusting the Volume
Press the Volume +/-
buttons on the remote
control.
1.
The volume control
appears on the display.
Press the Down Cursor
button on the keypad to
2.
adjust Volume +/-.
Press the Mute button to
3.
turn off the volume (This
feature is available only
on the remote).
– 17 –
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the buttons on the top of the projector to navigate
and make changes to the OSD. The following illustration shows the corresponding buttons on the re-
mote control and on the projector.
1. To enter the OSD, press the Menu button.
2. There are five menus. Press the cursor ◄►
button to move through the menus.
3. Press the cursor ▲▼ button to move up
and down in a menu.
4. Press ◄► to change values for settings.
5. Press Menu to close the OSD or leave a
submenu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the Horizon-
tal/Vertical Position items in the Computer menu can only be modified when connected to a PC.
Items that are not available cannot be accessed and are grayed out.
– 18 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Setting the OSD Language
Set the OSD language to your preference before continuing.
1. Press the Menu button. Press the cursor ◄► button to navigate to Installation I.
2. Press the cursor ▲▼ button until Language is highlighted.
3. Press the cursor ◄► button until the language you want is highlighted.
4. Press the Menu button twice to close the OSD.
– 19 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
– 20 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
OSD Sub-Menu Overview
– 21 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Image Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Image
Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change
values for settings.
ITEM
DESCRIPTION
Display Mode
Brilliant Color
Brightness
Press the cursor ◄► button to set the display mode.
Press the cursor ◄► button to adjust the Brilliant Color value.
Press the cursor ◄► button to adjust the display brightness.
Press the cursor ◄► button to adjust the display contrast.
Press the cursor ◄► button to adjust the display sharpness level.
Press the cursor ◄► button to adjust the gamma correction of the display.
Press the cursor ◄► button to adjust the color space.
Contrast
Sharpness
Gamma
Color Space
Color Temperature
Press the cursor ◄► button to select different color temperature.
Press Enter / ► to enter the color manager menu.
See Color Manager on page 23 for more information.
Color Manager
Reset
Press Enter / ► to reset all settings to default values.
– 22 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Color Manager
Press
(Enter) / ►
to enter the color manger sub menu.
ITEM
DESCRIPTION
Select to enter the Red Color Manager.
Red
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Green Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Green
Blue
Select to enter the Blue Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Cyan Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Cyan
Select to enter the Magenta Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Magenta
Yellow
White
Select to enter the Yellow Color Manager.
Press the◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the White Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
– 23 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Computer Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Com-
puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to
change values for settings.
ITEM
DESCRIPTION
Horizontal Position
Press the cursor ◄► button to adjust the display position to left or right.
Vertical Position
Frequency
Press the cursor ◄► button to adjust the display position to up or down.
Press the cursor ◄► button to adjust the A/D sampling clock.
Press the cursor ◄► button to adjust the A/D sampling dot.
Tracking
Auto Image
Press
(Enter) / ► to automatically adjustment for phase, tracking, size and position.
– 24 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Video/Audio Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Vid-
eo/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press
◄► to change values for settings.
ITEM
Video AGC
DESCRIPTION
Press the ◄► buttons to enable or disable the Automatic Gain Control for video source.
Press the ◄► buttons to adjust the video saturation.
Video Saturation
Video Tint
Film Mode
Video Overscan
Volume
Press the ◄► buttons to adjust the video tint/hue.
Press the ◄► buttons to select a different film mode.
Press the ◄► buttons to enable or disable video over scan.
Press the ◄► buttons to adjust the audio volume level.
Press the ◄► buttons to turn On or Off the speaker.
Mute
Reset
Press Enter / ► to reset all settings to default values.
Note:
Video jagging may occur when playing interlace video. To overcome this issue, open the
Video / Audio menu and adjust the Film Mode feature.
– 25 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Installation I Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa-
tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press
◄► to change values for settings.
ITEM
Language
DESCRIPTION
Press the cursor ◄► button to select a different localization menu.
Press the cursor ◄► button to enable or disable the automatically searching of all input port
to find out the valid source.
Auto Source
Blank Screen
Projection
Press the cursor ◄► button to select different color to blank the screen.
Press the cursor ◄► button to choose from two projection methods:
Press the cursor ◄► button to enable or disable security lock function.
Security Lock
Press the cursor ◄► button to adjust the video aspect ratio.
Aspect Ratio
Keystone
Note: The Aspect Ratio function is only accessible when the Digital Zoom is not active.
Press the cursor ◄► button to adjust the display keystone.
Press Enter / ► to enter the Digital Zoom menu. Press ▲ to zoom in; press ▼ to zoom out.
Use the
buttons to employ the Pan function.
Digital Zoom
Note: You must zoom in before the Pan menu is accessible.
Note: Digital zoom is disabled in SXGA/SXGA+/UXGA resolutions.
– 26 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Installation II Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa-
tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu.
ITEM
DESCRIPTION
Auto Power Off
(min.)
Press the cursor ◄► button to enable or disable automatic shutdown of lamp when no signal.
Auto Power On
Press the cursor ◄► button to enable or disable automatic power On when AC power is supplied.
Press the cursor ◄► button to toggle between Normal and High fan speeds.
Note: We recommend selecting high speed in high temperatures, high humidity, or high
altitude areas.
Fan Speed
Press the cursor ◄► button to select the lamp mode for higher brightness or lower brightness
to save lamp life.
Lamp Mode
Press
OSD setting menu.
(Enter) / ► to enter the OSD setting menu. See page 18 for more information on
OSD Menu Setting
Peripheral Test
Lamp Hour Reset
Press
Peripheral Test.
(Enter) / ► to enter the Peripheral Test menu. See page 29 for more information on
Press
(Enter) / ► to confirm lamp hour reset. Press Menu to cancel. See page 29 for more
information on Lamp Hour Reset.
Press
on Factory Reset.
(Enter) / ► to reset the entire item to default value. See page 30 for more information
Factory Reset
Status
Press
(Enter) / ► to enter the Status menu. See page 30 for more information on Status.
– 27 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
OSD Menu Setting
ITEM
DESCRIPTION
Menu Position
Translucent Menu
Menu Display
Press ◄► button to select different OSD location.
Press ◄► button to select OSD background translucent level.
Press ◄► button to select OSD timeout delay.
– 28 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Peripheral Test
ITEM
DESCRIPTION
Press
(Enter) / ►
(Enter) / ►
(Enter) / ►
Remote Control Test
Button Test
to test the IR remote controller for diagnostic.
to test the button on keypad.
Press
Press
Color Test
to select different colors on screen.
Sound Test
Press
(Enter) / ► to test the sound function of the internal speaker.
Lamp Hour Reset
Please refer to Resetting the Lamp on page 33 to reset the lamp hour counter.
– 29 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Factory Reset
Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory
Reset sub menu and press
(Enter) / ► to reset all the menu items to the factory default values.
Status
Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the
Installation II sub menu and press
(Enter) / ► to enter the Status sub menu.
ITEM
DESCRIPTION
Active Source
Display the activated source.
Video Information
Lamp Hours
Displays resolution/video information for RGB source and color standard for Video source.
Lamp hour used information is displayed. ECO and Normal counter are separated.
– 30 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
MAINTENANCE AND SECURITY
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
Important:
a. The projection lamp used in this product contains a small amount of mercury
b. Do not dispose this product with general household waste.
c. Disposal of this product must be carried out in accordance with the regulations of your local
authority.
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to
do so could result in a severe burn.
Loosen the two captive
screws on the lamp
1.
compartment cover (A).
Remove the lamp com-
partment cover (B).
2.
– 31 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Remove the two screws from
the lamp module (A).
3.
Lift the module handle up (B).
4.
Pull firmly on the module han-
dle to remove the lamp
module.
5.
– 32 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Reverse steps 1 to 5 to install
the new lamp module.
While installing, align the
lamp module with the connec-
tor and ensure it is level to
avoid damage.
6.
Note: The lamp module must
sit securely in place and the
lamp connector must be con-
nected properly before
tightening the screws.
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
Press the Menu button to open the
OSD menu.
1.
Press the cursor ◄► button to move
to the Installation II menu.
2.
Press the cursor ▲▼ button to move
down to Lamp Hour Reset.
3.
Press the cursor ► or
button.
4.
5.
6.
A message screen appears.
Press ▼ ▲ ◄ ► buttons to reset the
lamp hour.
Press the Menu button to get back to
Installation II.
– 33 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so
could result in a severe burn.
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings
on the projector.
3. If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
4. If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the pro-
jector lens.
1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.)
2. Lightly wipe the lens in a circular motion.
Caution:
1. Do not use abrasive cleaners or solvents.
2. To prevent discoloration or fading, avoid getting cleaner on the projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and then wipe
the case.
3. Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
– 34 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Using the Kensington® Lock
If you are concerned about security, attach the projector to a permanent object with the Kensington
slot and a security cable.
Note:
Contact your vendor for details on purchasing a suitable Kensington security cable.
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any com-
ment, contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-535-4242,
– 35 –
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Common problems and solutions
These guidelines provide tips to deal with problems you may encounter while using the projector. If
the problem remains unsolved, contact your dealer for assistance.
Often after time spent troubleshooting, the problem is traced to something as simple as a loose con-
nection. Check the following before proceeding to the problem-specific solutions.
•
•
•
•
•
•
Use some other electrical device to confirm that the electrical outlet is working.
Ensure the projector is turned on.
Ensure all connections are securely attached.
Ensure the attached device is turned on.
Ensure a connected PC is not in suspending mode.
Ensure a connected notebook computer is configured for an external display. (This is usu-
ally done by pressing an Fn-key combination on the notebook.)
Tips for Troubleshooting
In each problem-specific section, try the steps in the order suggested. This may help you to solve the
problem more quickly.
Try to pin point the problem and thus avoid replacing non-defective parts.
For example, if you replace batteries and the problem remains, put the original batteries back and go
to the next step.
Keep a record of the steps you take when troubleshooting: The information may be useful when call-
ing for technical support or for passing on to service personnel.
– 36 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
LED Error Messages
ERROR CODE MESSAGES
Over temperature
Thermal break status error
Lamp error
Power LED Blink Over Temp LED Ready LED Blink
0
4
5
6
6
6
7
8
9
ON
0
0
0
0
1
2
3
0
0
0
0
Fan1 error
0
Fan2 error
0
Fan3 error
0
Lamp door open
DMD error
0
0
Color wheel error
0
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re-
starting the projector. If the Power or Ready LEDs are still blinking or the Over Temp LED is lit,
contact your service center.
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto button on the remote control or projector.
3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone button on the remote control or Quick Menu on the projector to correct
the problem.
Problem: The image is reversed
Check the Projection setting on the Installation I menu of the OSD.
Problem: The image is streaked
1. Set the Frequency and Tracking settings on the Computer menu of the OSD to the de-
fault settings.
2. To ensure the problem is not caused by a connected PC’s video card, connect to another
computer.
Problem: The image is flat with no contrast
Adjust the Contrast setting on the Image menu of the OSD.
Problem: The color of the projected image does not match the source image.
Adjust the Color Temperature and Gamma settings on the Image menu of the OSD.
– 37 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Lamp Problems
Problem: There is no light from the projector
1. Check that the power cable is securely connected.
2. Ensure the power source is good by testing with another electrical device.
3. Restart the projector in the correct order and check that the Power LED is green.
4. If you have replaced the lamp recently, try resetting the lamp connections.
5. Replace the lamp module.
6. Put the old lamp back in the projector and have the projector serviced.
Problem: The lamp goes off
1. Power surges can cause the lamp to turn off. Re-plug power cord. When the Ready LED
is on, press the power button.
2. Replace the lamp module.
3. Put the old lamp back in the projector and have the projector serviced.
Remote Control Problems
Problem: The projector does not respond to the remote control
1. Direct the remote control towards remote sensor on the projector.
2. Ensure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
4. Check the battery polarity.
5. Replace the batteries.
6. Turn off other Infrared-enabled devices in the vicinity.
7. Have the remote control serviced.
Audio Problems
Problem: There is no sound
1. Adjust the volume on the remote control.
2. Adjust the volume of the audio source.
3. Check the audio cable connection.
4. Test the source audio output with other speakers.
5. Have the projector serviced.
Problem: The sound is distorted
1. Check the audio cable connection.
2. Test the source audio output with other speakers.
3. Have the projector serviced.
Having the Projector Serviced
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in
the original carton. Include a description of the problem and a checklist of the steps you took when
trying to fix the problem: The information may be useful to service personnel. For servicing, return the
projector to the place you purchased it.
– 38 –
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Specifications
Model
D326MX
D326WX
Display type
TIDMDTypeX, 0.55 inches,XGA
XGA 1024x768 Native
TI DMD Type X, 0.65 inches, WXGA
WXGA 1280x768 Native
Resolution
Projection distance
Projection screen size
Projection lens
Zoom ratio
1.5 meters ~ 10 meters
34 to 260 inches
39 to 300 inches
Manual focus / Manual zoom
1.15:1
Vertical keystone
correction
+/- 15 degrees
Desktop front/rear
Projection methods
Data compatibility
SDTV/EDTV/ HDTV
Video compatibility
H-Sync
IBM PC or compatibles (VGA, SVGA, XGA, SXGA, UXGA), Mac
480i, 576i, 480p, 576p, 720p, 1080i
NTSC/NTSC 4.43, PAL (B/G/H/I/M/N 60), SECAM
15, 31 - 70 KHz
15, 31 - 90 KHz
V-Sync
50 - 85 Hz
Safety certification
Operation temperature
Dimensions
FCC-B, UL, cUL, CB, CE, CCC
5° ~ 35°C
220 mm (W) x 71 mm (H) x 178 mm (D)
AC Universal 100 ~ 240, Typical @ 110 VAC (100~240)/±10%
Typical 260W (standard mode); Typical 210W (ECO mode)
< 5 watts
AC Input
Power consumption
Stand By
Lamp
Normal Mode: 200W; Eco Mode: 160W
1W / 4 ohm mono speaker
Audio speaker
PC
RGB
Composite video (RCA X 1)
Composite video (RCA X 1); HDMI
Video
S-Video (Mini-DIN)
Audio
Mini-jack
Security
Kensington lock
Input connectors
VGA
PC
USB (Service only)
Composite video (RCAx1)
S-Video (Mini-DIN); HDMI
Mini-jack
Video
Audio
Security
Kensington slot
– 39 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
Projection Distance V.S. Projection Size
Screen width
A
B
Image Hight
Keystone Correction Angel
A
Projection Distance
Maximum Screen Size (W)
Maximum Screen Size (Tele)
diagonal
Width A
diagonal
Height D
Width B
XGA WXGA
Projection
Projection
Distance
Height C
Distance L
XGA
WXGA
0.89m
35”
XGA
WXGA
0.76m
30”
XGA
WXGA
0.89m
35”
1.16m
3.8’
0.76m
30”
0.46m
18”
0.61m
24”
1.34m
4.4’
0.76m
30”
0.46m
18”
0.61m
24”
0.76m
30”
2.32m
7.6'
1.52m
60"
1.78m
70"
0.91m
36"
1.22m
48"
1.52m
60"
2.68m
8.8'
1.52m
60"
1.78m
70"
0.91m 1.22m
1.52m
60"
36"
1.37m
54"
48"
1.83m
72"
3.47m
11.4'
2.29m
90"
2.67m
105"
1.37m
54"
1.83m
72"
2.29m
90"
4.02m
13.2'
2.29m
90"
2.67m
105"
2.29m
90"
4.63m
15.2'
5.79m
19'
3.05m
120"
3.55m
140"
1.83m
72"
2.44m
96"
3.05m
120"
5.36m
17.6'
6.71m
22'
3.05m
120"
3.55m
140"
1.83m
72"
2.44m
96"
3.05m
120"
3.81m
150"
4.44m
175"
2.29m
90"
3.05m
120"
3.81m
150"
3.81m
150"
4.44m
175"
2.29m
90"
3.05m
120"
3.81m
150"
7.72m
25.3'
5.08m
200"
5.92m
233"
3.05m
120"
4.06m
160"
5.08m
200"
8.94m
29.3'
5.08m
200"
5.92m
233"
3.05m
120"
4.06m
160"
5.08m
200"
9.65m
6.35m
7.41m
292"
3.81m
5.08m
6.35m
250"
11.18m
36.7'
6.35m
250"
7.41m
292"
3.81m
150"
5.08m
200"
6.35m
250"
31.7'
11.58m
38'
250"
7.62m
300"
150"
4.57m
180"
200"
6.1m
240"
– 40 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Timing Mode Table
The projector can display several resolutions. The following table outlines the resolutions that can be
displayed by the projector.
XGA
WXGA
Signal
Resolution
Frequency Refresh
Video Digital
Analog Video Digital Analog
(KHZ
)
Rate(HZ
)
NTSC
--
15.734
15.625
31.5
37.9
31.5
31.5
37.9
31.5
37.9
31.5
37.9
37.5
43.3
35.2
37.9
46.9
48.1
53.7
48.4
56.5
57.7
60.0
68.7
64.0
80.0
91.1
47.4
75.0
60.0
--
--
--
--
--
--
--
Ο
Ο
PAL
/
SECAM
--
50.0
--
Ο
Ο
640 x 350
640 x 350
720 x 350
640 x 400
640 x 400
720 x 400
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 768
1600 x1200
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
70.1
85.1
70
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
70.1
85.1
70
85
60
72.8
75
85
56.3
60.3
75
VESA
72.2
85.1
60
70.1
72
75
85
60
75
85
60
60
– 41 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
XGA
WXGA
Resolution
Signal
Frequency Refresh
(KHZ
Video Digital Analog
Video Digital Analog
)
Rate(HZ
60
72
75
85
60
70
75
85
60
75
85
60
75
85
60
60
75
60
72
75
85
60
70
75
85
60
75
85
60
75
85
60
60
75
)
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
800x600
800x600
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
800x600
800x600
1024x768
1024x768
1024x768
1024x768
1280x720
1280x720
1280x720
1280x768
1280x768
1280x768
1280x800
1280x1024
1280x1024
800x600
Ο
Macbook
相容性
--
Ο
--
--
--
--
Ο
Ο
Ο
Ο
Ο
--
--
--
--
--
Ο
Ο
--
--
Ο
Ο
Ο
Ο
--
--
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
800x600
Ο
800x600
--
800x600
Ο
Ο
Ο
1024x768
1024x768
1024x768
1024x768
1280x720
1280x720
1280x720
1280x768
1280x768
1280x768
1280x800
1280x1024
1280x1024
Ο
Mac book Pro
(Intel) 相容性
--
Ο
--
--
--
--
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
--
--
--
--
--
--
--
Ο
Ο
Ο
– 42 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
XGA
WXGA
Resolution
Signal
Frequency Refresh
Video Digital Analog
Video Digital Analog
(KHZ
)
Rate(HZ
)
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
56
60
72
75
85
60
70
75
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Power Mac G5
相容性
Ο
--
--
--
Ο
--
--
--
1024x768
1280x720
1280x720
1280x720
85
60
75
85
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Ο
1280x768
1280x800
60
60
--
Ο
Ο
Ο
1280x1024
1280x1024
1280x1024
800x600
60
75
85
56
60
72
75
85
60
70
75
85
60
75
85
60
60
60
75
85
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Ο
--
Ο
--
--
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
1280x720
1280x720
1280x720
1280x768
1280x800
1280x1024
1280x1024
1280x1024
Power Mac G4
Ο
Ο
相容性
--
--
--
--
--
--
--
Ο
--
Ο
Ο
Ο
Ο
Ο
Ο
Ο
--
--
– 43 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector—User’s Manual
XGA
WXGA
Signal
HDTV
Resolution Frequency Refresh
Video Digital Analog
Video Digital Analog
(KHZ
)
Rate(HZ
)
1920 x 1080
1920 x 1080
1280 x 720
720 x 576
33.8
28.1
45.0
31.3
31.5
30.0
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
Ο
25.0
60.0
50.0
60.0
SDTV
720 x 480
○: Frequency supported
－: Frequency not supported
•
•
The resolution of the panel for the XGA is 1024 x 768 and 1280 x 768 for the WXGA. Resolution
other than native resolution may display with uneven size of text or lines.
HDTV timing: DVD player (main source), VG828 (secondary source).
– 44 –
Download from Www.Somanuals.com. All Manuals Search And Download.
DLP Projector – User’s Manual
Projector Dimensions
220 mm (8.6 inches)
– 45 –
Download from Www.Somanuals.com. All Manuals Search And Download.
REGULATORY COMPLIANCE
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the parties responsible for compliance could
void the user’s authority to operate the equipment.
Canada
This class B digital apparatus complies with Canadian ICES-003.
Safety Certifications
FCC-B, UL, and CCC
EN 55022 Warning
This is a Class B product. In a domestic environment, it may cause radio interference, in which case
the user may be required to take adequate measures. The typical use is in a conference room, meet-
ing room, or auditorium.
– 46 –
Download from Www.Somanuals.com. All Manuals Search And Download.
|