Vivitek Projection Television du6871 User Manual

User's Manual  
DU6871  
DX6851  
DW6831  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Replacing the Lamps �����������������������������������������������������������������������������������������������������44  
Installing or Removing the Projection lens ������������������������������������������������������������������45  
Replacing the filter ���������������������������������������������������������������������������������������������������������46  
Changing the Color Wheel ���������������������������������������������������������������������������������������������47  
LED indicator status �������������������������������������������������������������������������������������������������������48  
Power LED indicator �������������������������������������������������������������������������������������������������������������������������������48  
Status LED indicator �������������������������������������������������������������������������������������������������������������������������������48  
Lamp 1/Lamp 2 LED indicator ����������������������������������������������������������������������������������������������������������������48  
Temperature LED indicator ���������������������������������������������������������������������������������������������������������������������48  
Shutter LED indicator ������������������������������������������������������������������������������������������������������������������������������48  
DU6871/DW6851/DX6831 specifications ����������������������������������������������������������������������49  
Outline Dimensions ��������������������������������������������������������������������������������������������������������50  
Supported Signal Input Timing �������������������������������������������������������������������������������������51  
Computer ������������������������������������������������������������������������������������������������������������������������������������������������51  
3D Signal Input Mode �����������������������������������������������������������������������������������������������������������������������������52  
DU6871/DW6851/DX6831 lens series ����������������������������������������������������������������������������53  
About the VIVITEK support �������������������������������������������������������������������������������������������54  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Copyright  
Copyright  
The User's Manual (including all pictures, illustrations and software) is protected by the  
international copyright right law� All rights are reserved�  
No duplication of the manual or any content included in the manual is allowed without the  
written consent of the manufacturer�  
Vivitek is the trademark of Vivitek Corporation� ©All rights reserved� 2014  
Disclaimer  
The information in the manual is subject to change without notice�  
The manufacturer does not provide any statement or warranty of the contents in the  
manual and clearly give up the implied warranties of merchantability and of fitness for a  
particular purpose� The manufacturer reserves the rights to modify the publication and  
change the contents of the materials at any time without notice to any person�  
About the Manual  
The manual describes how to install and use the DLP projector and is applicable to the  
end-user� Relevant information (such as illustrations and descriptions) is put on the same  
page as possible as we can� The format, easy for printing, is convenient for reading and  
paper-saving which is beneficial to environmental protection. It is suggested printing the  
page you need�  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Important Safety Guidelines  
Thank you for purchasing the high quality product!  
Read the Manual carefully to obtain the best performance� The Manual provides  
instructions to use the menu and implement operation�  
Installation and Use Notice  
1� Read and keep the description properly�  
2� Pay attention to all warnings�  
3� Follow all guidelines and descriptions�  
4� Do not use the equipment near water� Do not install the equipment near the thermal  
source, such as the heater, radiator, furnace or other equipment that will generate heat  
(including the amplifier).  
5� Use dry clothes to clean only�  
6� Do not obstruct any vent� Carry out installation according to the guidelines of the  
Manufacturer�  
7� Do not destroy the safety protection function of polarized or grounding plugs� A  
polarized plug has one wide and one narrow blade� The grounding plug has two blades  
and one grounding blade� The wide blade or grounding blade is provided for the safety  
concerns� If the plug provided does not match the outlet, contact the electrician to  
change the old outlet�  
8� Prevent the power cord from being treaded or pressed, especially the power cord on  
the plug, outlet and the connection between the power cord and the equipment�  
9� Only use the connectors/accessories designated by the Manufacturer�  
10Be careful of moving the trolley/equipment and avoid being hurt due to turning-over  
when using the trolley�  
11� Unplug the power cord of the equipment if there is a thunderstorm or the equipment will  
not be used for a long time�  
12The authorized maintenance personnel is responsible for all maintenance work� The  
equipment should be repaired if damaged in any means� (For example, the power cord  
or outlet is damaged� Liquids splash to the equipment or foreign objects fall into the  
equipment� The equipment is exposed to rain or humidity� The equipment cannot work  
functionally or falls�)  
13The +12V trigger only outputs 12V DC trigger signal� Do not connect to other power  
input or output� Otherwise, the equipment may be damaged�  
14The packaging materials should be kept properly for the use of transportation�  
15Do not look straight at the lens when the projector is running�  
16The product can be used safely below the elevation of 2000m� There may be safety  
risk if the product is used above the elevation of 2000m�  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Disposal of Old Electric and Electronic Equipment  
The symbol on your product or the package represents that the product should not be  
treated as the normal household waste when discarded but should be carried to the  
recycling location of the waste electric and electronic equipment� The consequence on  
the environment and human health due to the incorrect disposal of the product can be  
prevented if it can be ensured that the product is properly discarded� Material recycling  
is helpful to the protection of natural resources� The symbol is only valid in European  
Union� If you want to discard electrical and electronic equipment, contact the governmental  
authorities or your dealer for the correct method of disposal�  
Important Recycling Instructions  
The lamp of the product contains mercury� The product may contain other electronic  
wastes and may pose risk if not discarded properly� Abide by the local, state/provincial or  
federal laws of recycling or discarding�  
For more information, please visit the website and contact Electronic Industries Alliance  
(EIA) on WWW�EIAE�ORG�  
Please visit WWW�LAMPRECYCLE�ORG for the specific disposal information of lamps.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Introduction  
The User's Manual describes the installation, setup and operation of the DU6871/DW6851/  
DX6831 projector and provides assistance to the installation personnel and the end-user to  
fully develop the performance of the projector� VIVITEK has made every efforts to ensure  
that the information in the Manual is correct at the time of printing� The contents may be  
frequently updated due to the continuously product improvement and customer feedback�  
You can find the latest version of the Manual and the manual of other Vivitek products on  
www�vivitekcorp�com�  
Product Features  
VivitekDU6871/DW6851/DX6831 has the cutting-edge technique and creative dual-lamp  
optical engine to provide the native high resolution as well as clear, brilliant and vivid  
pictures� Main Characteristics and Advantages of the Product Series  
The DLP system with the high performance digital micromirror device (DMD) in conjunction with  
the advanced thermal management technology provide the excellent projecting performance  
and reliability�  
The advanced dual-lamp optical engine as well as the single-lamp, dual-lamp, normal, energy-  
saving and Custom Lamp Power mode offer the convenience for installation� The power of lamps  
can be adjusted in the normal and energy-saving modes to make it easier for the installation  
personnel to fine-tune the edge blending brightness of multiple projectors.  
With the lamp switching feature, the projector can automatically select the lamps less used  
when turned on�  
The projector has the replaceable color wheel and smart color wheel switch design, can  
automatically detect and switch the parameter of corresponding color wheels and can be used  
in conjunction with the color wheel of high brightness or beautiful hues� It is applicable to the  
single projector�  
The interchangeable lens design allows the user to easily and quickly change the suitable lens  
by pressing the Lens Release key�  
With the complete series of motorized projection lenses, the horizontal shift, focusing and  
zooming of lenses can be electrically controlled� The throw ratio ranges from 0�7:1 to 8�5:1 and  
is suitable to be used in most applications�  
With the built-in Lens Memory feature, lens homing can be automatically implemented� 10 sets  
of lens shift, focusing and zooming can be saved at most� The setup and quick adjustment can  
be carried out�  
The mechanical shutter is built in the optical engine and allows the user to turn on/pause  
projection by pressing a single key�  
The high performance video processor can be used in progressive and interlaced scanning of  
the video inputs and video denoising�  
The complete input terminal support many input signals, such as HDMI, DisplayPort, HDBaseT,  
YPbPr and VGA, etc�  
With the built-in HDBaseT signal reception, HDBaseT transmitter can send high quality video  
and control signals through the single RJ45 cable�  
Many 3D display format is supported, such as Frame Sequential, Top/Bottom, Side by Side and  
Frame Packing�  
The synchronization of DLP Link and 3D IR is supported�  
With the high efficient power switch, the power consumption less than 0.5W in the stand-by  
mode�  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Packing Checklist  
The following items are included in the packaging box of the DU6871/DW6851/DX6831  
projector� If any loss or damage to any item, contact your dealer or the VIVITEK customer  
service department�  
Color-optimized  
AC power cord  
VGA signal cable  
color wheel  
Cable of the wired  
remote control  
IR remote control  
M4 screw  
产品中有毒有害物质或元素的名称及含量列表  
依据中国政府针对电子信息产品污染控制管法"为控制和减少电子信息产品废弃后对环境造成的污染,促  
生产和销售低污染电子信息产品,保护环境和人体健康提供有关本产品可能含有有毒及有害物 质如后:  
有毒有害物质或元素  
部件名称  
铅(Pb汞(Hg镉(Cd六价铬(Cr(VI)多溴联苯(PBB多溴二苯醚(PBDE)  
光机引擎(铝或铝镁合金)  
镜头  
X
X
X
X
X
X
O
O
X
X
X
X
X
X
O
O
X
O
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
灯泡  
点灯器  
O
O
O
O
O
O
O
O
O
O
O
弹片(快削磷铜)  
风扇组件  
灯泡盖保护开关  
温度开关  
X
基板组件  
O
O
O
O
O
O
缆线,线材  
电源线  
电源插座组件  
金属件(快削磷铜,铜钉等)  
遥控器  
○:表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006标准规定的限量要求以下。  
╳:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006标准规定的限量要求。  
备注:鉴于欧盟与中国对于RoHS的不同规定,本投影机产品符合欧盟RoHS指令(电气、电子设备中限制使用某些有害物质指令),  
表中标有"X"的所有部件均为欧盟ROHS指令所允许例外的部件。  
Qualification certificate  
(China)  
RoHS card (China)  
User's Manual disc  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Vent  
Projector Overview  
Heat is discharged from the projector  
via the vent� Make sure that the vent is  
clear�  
Intake/Filter cover  
The internal fan pulls cool air to the  
projector via the intake�  
Color wheel cover  
Front IR window  
(remote control)  
Adjustable supporting stand  
When the projector is installed on a  
desk, these stands can be used to  
adjust the levelness the projection  
angle�  
Power socket  
The power from the outlet on the wall  
is directed to the projector�  
Power switch  
The switch is used to turn on or off AC  
power of the projector�  
Control panel  
The user can use the buttons to select  
and adjust the settings of the projector�  
LED indicator  
Lens Release  
button  
Control panel  
LED indicator  
Power  
switch  
Adjustable supporting stand Power socket  
It shows the status of the projector�  
Lens Release button  
The user can push the Lens Release  
button to change the selected projector  
lens�  
Lens burglarproof screw  
The burglarproof screw can be  
fasten to prevent easy removal of the  
projector lens�  
Rear IR window  
(Remote Control)  
Note: The user cannot remove the  
lens by pressing the Lens Release  
button if the lens burglarproof screw is  
fastened� Make sure the burglarproof  
screw is unfastened if the lens is to be  
removed�  
Color wheel cover  
Vent  
Vent  
Intake/Filter cover  
The projector supports automatic  
switch of the color wheel settings�  
The color wheel cover can be lifted  
to change the selected color wheel  
after the projector is turned off� The  
projector will automatically switch to  
the corresponding color wheel settings  
after turned on�  
Vent  
IR window  
The control signal from the remote  
control can be received via the window�  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
I/O Panel  
DVI-D  
G/Y  
Display Port  
3D Sync Out  
RGB IN  
HDMI  
H
HDBaseT / LAN  
RGB OUT  
R/Pr  
B/Pb  
V
RS-232  
TRIGGER USB  
WIRE  
HDBaseT/LAN  
Connect to the RJ45 Cat5/Cat6 Ethernet cable�  
3D Sync Out  
Connect to the 3D IR synchronization signal transmitter�  
DVI  
Connect to DVI source�  
HDMI  
Connect to HDMI source�  
DisplayPort  
Connect to the equipment with DisplayPort or personnel computer�  
RGB In  
Provide the standard 15-pin VGA connection and can connect to RGB, HD Component  
or personal computer�  
RGB Out  
Connect to other display equipment to show the contents played simultaneously�  
R/Pr, G/Y, B/Pb, H, V  
Connect BNC-type input terminal to the RGB or YPbPr/YCbCr output signal of video  
equipment�  
RS-232  
The 9-pin D-sub interface is used to connect to the PC control system and projector  
maintenance�  
TRIGGER (Trigger)  
The 3�5mm mini earphone jack provides 12V (+/-1�5) output for screen control�  
USB  
It is a port exclusively used for maintenance and only can be used by the authorized  
maintenance personnel�  
WIRE (wired remote control)  
Connect to the input from the compatible IR transponder system of Niles or Xantech to  
become the wired remote control�  
Note: Please make sure whether the port for insertion is correct before the terminal of  
the wired remote control is inserted� The remote control may be damaged if inserted to  
the wrong port such as trigger�  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Control Panel  
+ +  
- -  
ENGER  
POWER  
User the button to turn on/off the projector�  
INPUT  
Push the button to select the video source� HDMI, DVI, VGA, Component/BNC  
DisplayPort or HDBaseT�  
AUTO SYNC  
Implement automatic signal synchronization�  
ASPECT  
Change the aspect ratio of the current image and push the button to change to the next  
aspect ratio settings�  
MENU  
Push the button to display or hide the OSD menu�  
ENTER  
Use the button to select settings or confirm the changed settings�  
EXIT  
Push the button to return to the menu on the previous level or exit the OSD menu�  
CENTER LENS  
Push the button to center the lens and calibrate the parameter of lens shift, focusing and  
zooming�  
Note: The lens memory function requires the accurate lens adjustment parameter�  
Please center the lens every time after the lens is mounted�  
SHUTTER  
Use the button to open/close the shutter�  
LENS SHIFT  
Use the button to move the lens to the right or left�  
FOCUS  
Use the button to adjust the focus of projected image�  
ZOOM  
Use the button to zoom in/out the lens�  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
ON  
Remote Control  
Use the button to turn on the projector�  
OFF  
Use the button to turn off the projector�  
FOCUS  
Adjust the focus of the projected image�  
ZOOM  
Zoom in/out the projected image�  
• TEST PATTERN  
Use the button to display the test image� Push to switch to  
the next test image and push the EXIT button to return to the  
projected image�  
• LENS SHIFT  
Use the button to move the lens to the right or left�  
• ENTER  
Use the button to select settings or confirm the changed settings.  
MENU  
Push the button to display or hide the OSD menu�  
• EXIT  
Push the button to return to the menu on the previous level or exit  
the OSD menu�  
• INPUT  
Push the button to select the input source�  
• PICTURE  
Start to adjust the image�  
• NETWORK  
Push the button to enter the LAN menu�  
• AUTO SYNC  
Push the button to carry out automatic signal synchronization�  
• ASPECT  
Repeatedly push the button to select the proportion for the next  
BLANK  
screen�  
• BLANK  
Push the button to temporarily interrupt the projection�  
• OVERSCAN  
Push the button to select the overscan mode�  
• FREEZE  
3D MODE  
Freeze/cancel the freeze of the projected image�  
• LAMP MODE  
Push the button to select dual lamp, Lamp 1 Lamp 2, Single�  
• 3D MODE  
Display the 3D settings menu�  
• INFO.  
Display the service menu�  
• LIGHT  
Push the button to turn on the backlight of the remote control�  
• CLEAR: No function  
• SHUTTER  
Use the button to open/close the shutter�  
• ID SET: No function  
Remote Control Instructions  
Reflection may be affected by the environment under some circumstances. Aim the remote control at the project to try again if  
it happens.  
* Change the battery if the effective distance of the remote control is reduced or the remote control does not work.  
When the terminal of the remote control cable is inserted to the wired control terminal of the projector, the projector will  
automatically switch to the wired control mode and cannot be controlled through the IR signal of the remote control. Disconnect  
the wired control terminal on the projector if you want to control through the IR signal of the remote control.  
Pay attention to the installation environment because the signal may not work due to interference if the IR remote sensor is  
exposed to the bright sunlight or fluorescence.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Installation of the Remote Control Battery  
2
1
3
1� Slide the battery cover in the direction of the arrow�  
2� Place two AA batteries with the correct polarity�  
3� Slide on the cover�  
Battery installation instructions  
• Make sure the battery is installed with the correct polarity  
• Do not use the old and new batteries or the batteries of different types together  
• Remove the battery if the remote control may not be used for a long time to prevent the damage caused by  
leaks  
Remote Control Operating Range  
10m  
±30°  
Note:  
• Do not expose the remote control to high temperature or humidity; otherwise, the remote control will not  
work functionally.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Precautions For installation  
The high quality display effect can be guaranteed only when the projector is correctly  
installed� Generally, the light source facing the screen should be reduced or eliminated as  
much as possible� The contrast of the image will be obviously reduced if the light directly  
shines on the screen, such as the beam from windows or the searchlight cast on the  
image� The image may become faded and not bright�  
Projector Installation and Setup  
There are 6 fixture screw holes at the bottom of projector for ceiling mounting, the available  
installation options as below�  
Front: Install the projector on the table and project the image forward�  
Rear: Install the projector on the table and project the image from rear�  
Ceiling + Front: Mounting the projector on the ceiling and project the image forward�  
Ceiling + Rear: Mounting the projector on the ceiling and project the image from rear�  
Up + Front: Projector is mounted vertically upwards and project image upwards�  
Down + Front: Projector is mounted vertically downwards and project image downwards�  
6 fixture screw for ceiling mount  
The screw is M4*0�7�  
The maximum length of screws is 18mm�  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Cautions on ventilation  
The product is a high-brightness projector. The intake with filters are located on the front and  
right sides to provide sufficient air for cooling. The projector has two vents on the back for  
cool air discharging� Make sure the intake and vent are unobstructed when the projector is  
being installed� At least 50cm around the intake and 70cm around the vent should be clear�  
50cm above  
50cm above  
70cm above  
30cm above  
W I R E U S B  
R T I G G E R  
R S - 2 3 2  
S H I F T  
L E N S  
E X I T  
M E N U  
V
H
B / P b  
G / Y  
R / P r  
R G B O U T  
R G B I N  
O
Z
O M  
F O C U S  
H D B a s e T / L A N  
H D M I  
D i s p l a y P o r t  
3 D S y n c O u t  
D V I - D  
S H U T T E R L E N S  
T
C
A S P C E N Y S  
U A  
I N P U T  
P O W E R  
C E N T E R  
O
T
Note:  
• If the installation distance is not enough, the projector may enter the system protection mode due to the  
rising ambient temperature after running for a while. Then, projection may be interrupted.  
• The service life of components or lamps may be reduced due to the long-term effect of the ambient  
temperature if the installation distance is not appropriate.  
• If the projector has to be installed in a box or a closed environment due to the installation requirements,  
the external intake and vent system should be designed additionally to ensure that there is enough air for  
cooling or the projector will not be surrounded by heat.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Lens Shift  
The DU6871/DW6851/DX6831 projector has the lens shift feature and the image can be  
vertically shifted without moving the projector� The lens shift bit is shown in the percentage of  
the screen height� The project installed on the desk can move up and down by 50% (0�5V)�  
Vertical lens shift  
The project installed on the desk can move up and down by 50% (0�5V)�  
0.5V  
Vertical shift  
(Max.)  
0.5V  
(Max.)  
Projected image  
Projected  
height  
image  
height V  
The lens of the ceiling mount projector can move down by 50% (0�5V)�  
Projected  
image  
height V  
W
I
R
E
U
S
B
R
T
I G G E R  
R S - 2 3 2  
Projected image height  
S H I F T  
L E N S  
E X I T  
M E N U  
V
H
B / P b  
G / Y  
R / P r  
R G B O U T  
R G B I N  
O
Z
O M  
F O C U S  
H D B a s e T / L A N  
H D M I  
D i s p l a y P o r t  
3 D S y n c O u t  
S H U T T E R L E N S  
T
C
A S P C E N Y S  
I N P U T  
P O W E R  
D V I - D  
C E N T E R  
O
T
U A  
0.5V  
(Max.)  
0.5V  
(Max.)  
Vertical shift  
Horizontal lens shift  
The image can be shifted horizontally to the right or left by 10% (0�1H) without moving the  
projector�  
0.5V  
(Max.)  
Projected  
Normal projection  
image height  
area  
V
Projected image  
width  
0.1H  
H
0.1H  
Shift to the  
left  
Shift to the  
right  
H: Projected  
image width  
Note:  
• This is the general example of lens shift. The shift ability depends on the lens. No specific lens or projector  
is used in the example.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Connecting the Projector to Other Equipment  
Follow the instructions below to connect the DU6871/DW6851/DX6831 projector to the  
video source, external control equipment (if any) and AC power supply� When connecting  
to the equipment, use the correct signal cable to connect to every signal source and  
ensure that the cable is securely connected� Fasten the nut on the joint and connect the  
signal source equipment to the projector according to the figure below.  
Connecting to the personal computer  
You can connect the PC signal to be projected to the projector through the DVI-D, HDMI,  
DisplayPort, RGB or RGBHV (BNC) cable� If the signal to be input is VGA signal, connect  
the VGA cable to the external display to simultaneously monitor the projected screen�  
Connecting to the video equipment  
Connect the video equipment to the input port of the projector via the DVI-D, HDMI,  
DisplayPort and Component Video Connector cable�  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Connecting to the control equipment  
The projector has the following control port for connecting to the control equipment:  
3D sync signal  
transmitter (IR)  
HDBaseT/LAN (Network control): The projector supports network control� LAN and  
HDBaseT share the port� If only network control is used, you can connect the LAN on the  
projector to PC or through the local network� Refer to the remote control guidelines for  
detailed information�  
RS-232 (RS-232c control): The projector supports RS-232c serial control� The  
projector can be remote-controlled by connecting the projector to PC or control system  
through the standard 9-pin serial cable (Straight Through Serial Cable)� Refer to the  
remote control guidelines for detailed information�  
Wired remote control: If the projector cannot receive the IR signal from the remote  
control due to the overly long distance or obstacles, you can connect the cable to the  
IR remote control or the external IR transmitter (optional) via the WIRE input port to  
expand the working range of the remote control�  
3D Sync Out: 3D IR sync signal transmitter�  
Note:  
• When the terminal of the remote control cable is inserted to the wired control terminal of the projector, the  
projector will automatically switch to the wired control mode and cannot be controlled through the IR signal  
of the remote control. Disconnect the wired control terminal on the projector if you want to control through  
the IR signal of the remote control.  
• If the wired remote control cable or the external IR transmitter is inserted to the incorrect port, such as  
Trigger, the remote control or the IR transmitter may be damaged. Make sure whether the port is correct  
before insertion.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Connecting to the Screen Trigger  
If your projection system includes the Electric projection screen and other 12V trigger device,  
you can connect these devices to the 12V trigger to output and configure the output 12V  
signal settings, such as automation and the aspect ration of 16:10 through OSD control to  
Trigger� The projector will output 12V signals according to the current settings of the aspect  
ratio and trigger when turned on� You can use the signal to control the screen or device�  
Screen  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Connecting to the External HDBaseT Transmitter  
The projector has a built-in HDBaseT signal receiver� With the HDBaseT Transmitter  
(optional), the video, RS-232 and LAN signals can be sent to the projector via a single  
RJ-45 cable� If the HDBaseT Transmitter you purchased supports the input and output of  
the IR remote control, the control signals from the IR remote control can be sent to the  
DU6871/DW6851/DX6831 projector via the RJ-45 cable�  
DVD Player  
DVD Player  
VGA Cable  
HDBaseT transmitter  
VGA IN  
YPbPr  
RJ45  
Lan  
HDMI  
RS232  
RJ45  
HDBaseT  
Control PC  
Hub  
RS-232c  
Control PC  
RJ-45 Cat5e or above  
Projector  
Note:  
• The projector supports the video signal, R-232, IR remote control and the reception of the network control  
signals but do not support Power over Ethernet (PoE).  
• Set the Control->RS232->Channel on the OSD menu to HDBaseT if you want to use the external  
HDBaseT transmitter to send the RS232 command to the projector via the RJ45 cable and baud rate will  
switch to 9600.  
• If the command is sent via the HDBaseT transmitter, the longest transmission distance is 100 meters. The  
projection may be interrupted or interfered, or the control signal cannot be sent if the transmission distance  
is exceeded.  
• Use the RJ-45 Cat5e or above cable and avoid entwining. Entwining may cause damage, interfere signal  
transmission, reduce the transmission distance and degrade the image quality.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Starting to Use the Projector Setup  
Connecting to AC Power Supply  
The AC power cord is included in the box, plug the power cord to the AC socket (AC100V-  
240V) on the back of the projector and plug another end of the AC power cord to the AC  
outlet�  
Note:  
• Make sure the power system (including the project and power supply system) is properly grounded before  
connecting to the AC power. The projector may be damaged without the grounding circuit.  
• This is a high-brightness and high-watt projector. Do not modify the AC power cord or replace the power  
cord arbitrarily to avoid causing damages to the projector or safety problems.  
Turn on  
Press ON on the remote control or POWER on the projector� The power and lamp LED  
indicator flashes green to show warm-up.  
AUTO  
POWER  
INPUT SYNC ASPECT  
MENU  
EXIT  
or  
The power and lamp LED indicator will light green and the projector lights turn on when the  
projector is ready for use. Refer to the chapter of LED statuses if the LED indicator flashes  
red� Please contact the Vivitek licensed dealer if the problem cannot be solved�  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Changing the OSD Language  
The project can show the English, French, Spanish, German, Portuguese, Simplified Chinese,  
Traditional, Japanese and Korean menu. Press MENU to show OSD and press◄► to select  
control items. Press▲▼ to select language, ▲▼ to select the language to be used, Enter to  
confirm the selection.  
PICTURE  
CONTROL  
INPUT  
LAMP  
Standard  
Off  
ALIGNMENT  
SERVICE  
Language  
Eco Network Power  
Auto Power off  
Auto Power On  
Projector Control  
Network  
<
<
<
<
>
>
>
>
English  
Franais  
Espaol  
Off  
Both  
Enter  
Enter  
Off  
Deutsch  
Português  
简体中文  
繁體中文  
日本語  
RS232  
Startup Logo  
Trigger  
<
<
<
<
>
>
>
>
Off  
Auto Search  
Dynamic Black  
3D  
Off  
한국어  
Off  
Enter  
Enter  
Language  
Adjusting the projection mode  
The projection mode has influence on the direction of the projected image and cooling.  
The projection mode option can be used to change the direction of the projected screen  
and the cooling fan speed to ensure that the projector is properly cooled� The improper  
projection mode settings may trigger over temperature protection or reduce the service  
life of lamps and elements� Please make sure the correct projection mode is set when the  
projector is installed�  
Press the MENU button on the remote control or the control panel to set the projection  
mode and select ALIGNMENT→ Projection Mode  
Front: Installed on the desk and the projection screen will be shown in the normal direction�  
Rear: Installed on the desk� The image will be projected from behind the screen and  
the projected image will be overturned�  
Ceiling+Front: Ceiling mounted� The image will be projected from the front of the screen  
and will be overturned on 180 degree� The cooling fan speed will be adjusted�  
Ceiling+Rear: Ceiling mounted� The image will be projected from behind the screen  
and the projected image will be overturned on 180 degree� The cooling fan speed will  
be adjusted�  
Up+Front: The projector is installed upwards and the image is projected upward� The  
cooling fan speed will be adjusted�  
Down+Front: The projector is installed downwards and the image is projected  
downward� The cooling fan speed will be adjusted�  
PICTURE  
ALIGNMENT  
INPUT  
LAMP  
CONTROL  
SERVICE  
Projection Mode  
Fan Mode  
<
<
Front  
Normal  
Enter  
Enter  
Execute  
0
>
>
Lens Control  
Lens Memory  
Center Lens  
Keystone  
<
>
Digital Alignment  
H/V Alignment  
Enter  
Enter  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Lens Shift  
The projector has the features to control the screen size, location and focusing� Press the  
Lens Shift button on the control panel or the remote control to shift, zoom in/out or focus  
on the projected image�  
Vertical lens shift  
Press ▲▼ to move upward or downward to vertically move the projected image.  
Horizontal lens shift  
Press ◄ ► to move to the right or left to horizontally move the projected image.  
Zoom in/out  
Press ZOOM+ or ZOOM- on the control panel to enlarge (zoom in) or reduce (zoom out)  
the projected image size�  
Focus  
Press ZOOM+ or - on the control panel to make the screen clear�  
+ +  
- -  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Starting to Use the Projector-Operation  
Select the input source  
Push the INPUT button on the remote  
control to directly select the input source�  
Select the aspect ratio  
Push ASPECT to adjust the aspect ratio of  
the image�  
BLANK  
3D MODE  
Use OSD  
1� Push the MENU button on the remote control or the control panel to show the OSD  
main menu�  
2� Press ◄ or ► to select the sub-menu.  
3� Press ▲ or ▼ to select the item of the sub-menu.  
4� The selected item will be highlighted, press ▲ or ▼ to select the settings of the item  
and press ENTER or the ENTER on the control panel to adjust the value of the item�  
5� Press MENU to return to the previous menu�  
6� Press MENU in the main menu or EXIT to close the OSD menu�  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
OSD Menu Tree  
Main menu  
INPUT  
Sub-menu  
Input Selection  
HDMI  
DVI  
VGA  
Component/BNC  
DisplayPort  
HDBaseT  
Test Pattern  
Color Space  
Color Bar, Crosshatch, Burst, Red, Green, Blue,  
White, Black, H Ramp  
Uncorrected Red, Uncorrected Green, Uncorrected  
Blue, Uncorrected White, Uncorrected Black, Off  
Auto  
YCbCr  
YPbPr  
RGB-PC  
RGB-Video  
Auto  
Input Lock  
48Hz  
50Hz  
Blue  
Background  
Logo  
Blue  
Black  
White  
Auto Sync Adjust Off  
Auto  
Always  
PICTURE  
Picture Mode  
High Bright  
Presentation  
Video  
Contrast  
Brightness  
Saturation  
Hue  
Gamma  
Film  
Graphics  
Video  
Linear  
2�2  
Color  
Color  
Color Temp  
Native  
5400K  
6500K  
9300K  
Red Lift  
Green Lift  
Blue Lift  
Trim  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Main menu  
PICTURE  
Sub-menu  
Color  
Trim  
Hue  
Red Gain  
Green Gain  
Blue Gain  
Red  
Green  
Blue  
Cyan  
Magenta  
Yellow  
Red  
Saturation  
Green  
Blue  
Cyan  
Magenta  
Yellow  
Red  
Gain  
Green  
Blue  
Cyan  
Magenta  
Yellow  
Red  
White Balance  
Green  
Blue  
Sharpness  
Noise Reduction  
Aspect Ratio  
05:04  
04:03  
16:10  
16:09  
1�88:1  
2�35  
LetterBox  
Native  
Unscaled  
Off  
Overscan  
Crop  
Zoom  
VGA Setup  
H Total  
H Start  
H Phase  
V Start  
Auto Sync  
Mode  
LAMP  
Dual Lamp  
Lamp 1  
Lamp 2  
Single  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Main menu Sub-menu  
LAMP  
Power  
Normal  
Eco  
Custom Power Level  
High Altitude  
On  
Off  
Lamp 1 Status  
Lamp 2 Status  
ALIGNMENT  
Projection Mode Front  
Rear  
Ceiling + Front  
Ceiling + Rear  
Up + Front  
Down + Front  
Zoom  
Lens Control  
Focus  
Shift V  
Shift H  
Lens Memory  
Center Lens  
Load Memory  
Edit Memory  
Execute  
Memory Set 1 to 10  
Memory Set 1 to 10  
Digital Alignment Digital Zoom  
Digital Pan  
Digital Scan  
Reset  
H/V Alignment  
H Zoom  
V Zoom  
H Shift  
V Shift  
Reset  
Standard  
Eco  
CONTROL  
Standby Mode  
Auto Power Off  
On  
Off  
Auto Power On On  
Off  
Projection control RS232  
Network  
Automatic switch  
IP Address  
Network  
Subnet  
Gateway  
DHCP  
On  
Off  
Apply  
RS232  
Baud Rate  
115200/57600/38400/19200/  
14400/9600/4800/2400/1200  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Main menu  
CONTROL  
Sub-menu  
RS232  
Channel  
Local  
HDBaseT  
Startup Logo  
Trigger  
On  
Off  
05:04  
04:03  
16:10  
16:09  
1�88  
2�35  
Letter Box  
Native  
On  
Off  
On  
Auto Search  
Dynamic Black  
3D  
Off  
3D Format  
Off  
Auto  
Side by Side  
Top/Bottom  
Frame Sequential  
On  
Off  
Normal  
Reverse  
DLP Link  
3D Swap  
3D 24Hz Display 96Hz  
144Hz  
Language  
English/Français/Español/  
Deutsch/Português/ 简体中文 /  
繁體中文  
/ 日本語 / 한국어  
SERVICE  
Model  
Serial Number  
Software Version  
Active Source  
Pixel Clock  
Signal Format  
H/V Refresh Rate  
Lamp 1 Time  
Lamp 2 Time  
Blue Only  
On  
Off  
Factory Reset  
OK  
Cancel  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
OSD Menu - INPUT  
PICTURE  
INPUT  
LAMP  
Enter  
ALIGNMENT  
CONTROL  
SERVICE  
Input Selection  
Test Pattern  
Color Space  
Input Lock  
Enter  
AUTO  
AUTO  
LOGO  
Always  
<
<
<
<
>
>
>
>
Background  
Auto Sync Adjust  
Input Selection  
This function is same as the shortcut key on the remote control� You can use the  
remote control or this function to select the correct input source�  
HDMI  
HDMI input in PC or media equipment�  
DVI  
DVI input in PC�  
VGA  
RGB signal in PC�  
Component/BNC  
Analog/serial digital interface in media equipment�  
DisplayPort  
DisplayPort input in PC or media equipment�  
HDBaseT  
HDBaseT output of PC, media equipment or HDbaseT transmitter�  
Test Pattern  
The built-in image is provided for installation and adjustment� You can select Test  
Pattern on OSD or the TEST PATTERN button on the remote control to display the test  
pattern� Press the button again to display the next test pattern or press the Exit button  
to exit the test pattern�  
Color Space  
This function allows you to change the corresponding color space for the input signal�  
In most cases, the correct color space can be selected automatically by Auto mode� If  
the selection is not correct, you can use a specific color space forcibly by selecting one  
of the following options:  
Auto: The projector detects the input signal and switches to the corresponding color  
space automatically�  
YCbCr: Set the color space to ITU-R BT601�  
YCbCr: Set the color space to ITU-R BT709�  
RGB-PC: Use the RGB color space and set the black to 0, 0, 0 RGB while set the white  
to 255, 255, 255 RGB (if a 8-bit image is used)�  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
RGB-Video: Use the RGB color space and set the black to 16, 16, 16 RGB while set  
the white to 235, 235, 235 (if a 8-bit image is used) to correspond to the luminance  
value defined in the digital component standard�  
Input Lock  
You can use this function to lock an input source to the internal sync signal (Auto, 48Hz,  
50Hz or 60 Hz)� The sync signal is locked to the current signal source if it’s set to Auto�  
Background  
You can use this function to specify the image to be displayed on the blank screen  
when no signal is input� You can select the Startup logo, Blue, Black, or White�  
The default is Startup logo�  
Auto Sync Adjust  
You can use this function to set auto synchronization for the input signal�  
Auto: The projector memorizes 10 sets of signal sources that you have used lately�  
When the Auto option is selected, the projector will choose the signal that you use last  
time�  
Always: The auto sync function is executed every time�  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
OSD Menu - PICTURE  
PICTURE  
INPUT  
LAMP  
Video  
ALIGNMENT  
CONTROL  
SERVICE  
Picture Mode  
Contrast  
<
<
<
<
<
>
100  
100  
>
>
>
>
Brightness  
Saturation  
Hue  
100  
100  
Color  
Enter  
15  
Sharpness  
Noise Reduction  
Aspect Ratio  
Overscan  
VGA Setup  
Auto Sync  
<
>
<
<
<
0
>
>
>
16:10  
Off  
Enter  
Execute  
Picture Model  
Use ◄► to select a picture model.  
High Bright: The highest brightness output mode is suitable for the occasion where  
high brightness is needed�  
Presentation: The best image effect is suitable for the presentation or picture�  
Video: The best color mode is suitable for play of the video�  
Contrast  
Use ◄► to adjust the contrast of the projected image.  
Note:  
• The brightness and contrast controls affect each other. To obtain the best setting, fine-tune of the  
brightness setting might be needed after adjustment of the contrast.  
Brightness  
Use ◄► to increase or decrease the brightness of the image.  
Saturation  
Use ◄► to adjust the saturation level of the color (the higher the level, the higher the  
saturation)�  
Hue  
Use ◄► to adjust the level of hue for reproduction of the true color.  
Gamma  
When the ambient light is too bright and may affect the display of the details in the  
darker area of the image, you can select from the following gamma options to adjust  
the chrominance of the image�  
Film: Set the chrominance correction to approximately Gamma 2�2�  
Graphics: This options is used for the PC presentation that needs higher brightness at  
the cost of the gray scale accuracy�  
Video: This is similar to the Film option, but there is a different in the dark area of the  
image to correspond to the function that the camera uses for creation of the image�  
Linear: Set Gamma to linear chrominance correction�  
2�2: Set the chrominance correction to 2�2�  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Color  
Use ◄► to adjust the color temp of the projected image.  
Sharpness  
Use ◄► to adjust the sharpness. The purpose of this adjustment is to change the  
value of the high-frequency detail�  
Noise Reduction  
Use ◄► to adjust the noise of the projected image. This function is suitable for  
removing the noise of the image in interlaced scanning input� Generally, noise reduction  
can lower the value of the high-frequency detail and make the image softer�  
Aspect Ratio  
This function allows the user to adjust the aspect ratio of the image�  
With a normal input of 16:10, the aspect ratio:  
Normal output  
16:10  
Output screen ratio  
5:4  
Output screen ratio  
4:3  
Output screen ratio  
16:9  
Output screen ratio  
1.88  
Output screen ratio  
5:4  
Output screen ratio  
Letterbox shape  
Output screen ratio  
Native  
Output screen ratio  
Unscaled  
With a normal input of 4:3, the aspect ratio:  
Normal output  
4:3  
Output screen ratio  
5:4  
Output screen ratio  
4:3  
Output screen ratio  
16:9  
Output screen ratio  
1:88  
Output screen ratio  
2.35:1  
Output screen ratio  
Letterbox shape  
Output screen ratio  
Native  
Output screen ratio  
Unscaled  
Overscan  
Noise may appear on the edge of the projected image, use this function to select one of  
the following options to hide the edge of the image:  
VGA Setup  
Set the H Total, H Start, H Phase and V Start for the VGA signal display�  
Auto Sync  
Use this function to execute the Auto Sync input signal�  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
OSD Menu - LAMP  
PICTURE  
INPUT  
LAMP  
Enter  
ALIGNMENT  
CONTROL  
SERVICE  
Mode  
Power  
Eco  
Off  
High Altitude  
<
<
>
Custom Power Level  
Lamp 1 Status  
--------  
On  
>
Lamp 2 Status  
Off  
Mode  
Use the ◄► function to select the single-lamp or dual-lamp mode.  
Dual: Enable the dual-lamp projection mode�  
Lamp 1: Use Lamp 1 for projection� The system switches to Lamp 2 if Lamp 1 is  
abnormal in activation�  
Lamp 2: Use Lamp 2 for projection� The system switches to Lamp 1 if Lamp 2 is  
abnormal in activation�  
Single: Use the single-lamp mode for the projection� The lamp is not specified in this  
mode, the projector selects the lamp that has the least operation hours automatically  
whenever it is turned on�  
Note:  
1. In the Lamp 1 or Lamp 2 mode, the projector will switch to another lamp when the set lamp becomes  
abnormal. The corresponding LED indicator of the lamp will flash simultaneously for seconds and light up.  
2. When the lamp mode is set to Single, the setting will become valid upon turn-on of the projector next time.  
3. Quick switch of the lamp mode may affect the life of the lamp. The projector will disable the lamp mode  
function (highlighted) every time when a switch is conducted till the switch of the lamp mode is completed.  
The lamp mode options are not available before the switch of the lamp mode is completed.  
Power  
Use the ◄► function to select the ECO, Normal or Custom Power Level mode.  
Normal: Projection is carried out using the normal lamp power to obtain the brightest  
projection display�  
ECO: Projection is carried out in the energy saving mode to ensure the longest service  
life of the lamp�  
Custom Power Level: In addition to the Normal and ECO modes, the lamp power  
equal to 100% to 75% of the power in the Normal mode is used for fine-tune of the  
brightness in the Custom Power Level mode� This function can be used for quick  
installation and routine maintenance in multi-projector applications� Select this mode to  
enable the Custom Power Level function�  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
High Altitude  
Use this function to control the cooling fan of the projector� You can set it to OFF or ON,  
the default setting is OFF�  
Normally, the projector can operate normally when this function is set to OFFThe  
projector detects ambient temperature by default to regulate the cooling fan speed�  
When the temperature rises, the cooling fan speeds up (with higher noise) to exhaust  
the internal heat energy out of the projector and ensure its normal operation� However,  
the projector may turn off automatically if it is used in an environment at excessively  
high temperature or in an area at a high altitude� In this case, you can enable this  
function by setting it to ON and have the cooling fan operate at a higher speed to  
control the internal temperature of the projector�  
Note:  
• The area at a high altitude means the place at an altitude of more than 5000 feet.  
Custom Power Level  
Use the ◄► function to select the Custom Power Level. The projector allows a custom  
power level equal to 100%~75% of the lamp power in the Normal mode� This function  
is available only when the lamp power is set to Custom Power Level� It cannot be  
selected (highlighted) in the Normal or ECO mode�  
Lamp 1 Status  
Show the current status of Lamp 1 (ON/OFF)  
Lamp2 Status  
Show the current status of Lamp 2 (ON/OFF)  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
OSD Menu - ALIGNMENT  
PICTURE  
ALIGNMENT  
INPUT  
LAMP  
>
CONTROL  
SERVICE  
Projection Mode  
Lens Control  
Lens Memory  
Center Lens  
Keystone  
<
Front  
Enter  
Enter  
Execute  
0
<
>
Digital Alignment  
H/V Alignment  
Enter  
Enter  
Projection Mode  
Use the ◄► function to select a projection mode: Front, Rear, Ceiling + Front, Ceiling  
+ Rear, UP and Down�  
Lens Control  
Select this function to open the Lens Control menu for adjustment of Zoom, Focus or  
Shift. You can use the Enter button to switch the Zoom/Focus or Shift menu. Use ◄►  
to adjust zooming and horizontal shift of the lens, or use ▲▼ to adjust focusing and  
vertical shift of the lens�  
Lens Control  
Lens Control  
Zoom  
Focus  
Shift V  
Shift H  
Enter to Shift  
Enter to Zoom/Focus  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Lens Memory  
This projector supports the lens zooming, focusing and lens shift memory function� Up  
to 10 sets of settings can be stored� The name setup in the memory can be input from  
the keyboard simulator� You can store the current lens position (H/V), zoom and focus,  
use the Load Memory function to load the stored lens setting values� The projector will  
adjust to the corresponding lens shift, zoom and focus settings automatically�  
PICTURE  
<
ALIGNMENT  
INPUT  
LAMP  
>
CONTROL  
SERVICE  
Lens Memory  
Projection Mode  
Lens Control  
Lens Memory  
Center Lens  
Keystone  
Front  
Enter  
Enter  
Execute  
0
Load Memory  
Enter  
Enter  
Edit Memory  
Load Memory  
STD 4:3  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
Enter  
<
>
Memory 2  
Memory 3  
Memory 4  
Memory 5  
Memory 6  
Memory 7  
Memory 8  
Memory 9  
Memory 10  
Digital Alignment  
H/V Alignment  
Enter  
Enter  
Load Memory  
Call back the lens setting that you have set and press the Enter button to display the  
lens memory list. Use ▲▼ to select the lens memory setting that you have set and  
press the Enter button to execute the lens setting�  
The projector supports up to 10 sets of lens settings� The lens memories that you have set  
are indicated with different colors� Only the lens memory that you have set can be selected  
from the list� To add or modify any lens memory, please perform the Edit Memory function�  
Edit Memory  
You can set the name using the Edit Memory function and store the current lens  
settings including the lens shift, zoom and focus�  
Press the Enter button to display the Edit Memory window and keyboard simulator� Use  
▲▼◄► and the Enter button to select or confirm the setting.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Change the name of the memory: The default name is Memory_number� You can  
use the Back space button to delete the characters in the dialog box� The Caps  
button is used to selected uppercase and lowercase characters. Use ▲▼◄► to  
select the character and press the Enter button to confirm the input character� The  
maximum allowable 9 characters including texts, numbers, symbols and spaces�  
Cancel: Press the Cancel button to cancel the memory setting�  
Accept: Press the Accept button to confirm the memory setting�  
Clear Memory: Select the Clear Memory button and press the Enter button to  
confirm cancellation of the selected setting� A prompt of the confirmation is shown  
on the button� To confirm the cancellation of the selected setting, press the Enter  
button. Otherwise, Use ▲▼◄► to move the cursor away and do not cancel the  
selected setting�  
Note:  
• The Lens Memory function must be used in conjunction with VivitekD88-ST001, D88-UWZ01, D88-  
WF18501, D88-WZ01, D88-SMLZ01, D88-LOZ101 or D88-LOZ201 serial lens.  
To ensure that the projector can remember the lens parameters precisely, make sure to perform the Center  
Lens function whenever a lens is mounted.  
Center Lens  
This is the lens calibration function� The projector adjusts the lens parameters for the  
lens memory function to work and sets the lens to the default center position�  
Keystone  
Select the Keystone function and use ◄► to adjust the screen for the vertical distortion  
brought about by the projection angle�  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Digital Alignment  
PICTURE  
ALIGNMENT  
Digital Alignment  
INPUT  
LAMP  
>
CONTROL  
SERVICE  
Projection Mode  
Lens Control  
Lens Memory  
Center Lens  
Keystone  
<
Front  
Enter  
Enter  
Execute  
0
Digital Zoom  
Digital Pan  
Digital Scan  
Reset  
<
<
<
0
>
>
>
0
0
Execute  
<
>
Digital Alignment  
H/V Alignment  
Enter  
Enter  
Select this function to enlarge the projected image�  
Digital Zoom: Use ◄► to enlarge the projected image.  
Digital Pan: Use ◄► to move the projected image horizontally. This function is only  
available when the projected image is enlarged�  
Digital Scan: Use ◄► to move the projected image vertically. This function is only  
available when the projected image is enlarged�  
Reset: Set the Digital Alignment back to the factory default value�  
H/V Alignment  
H Zoom: Use ◄► to narrow the horizontal size of the projected image.  
V Zoom: Use ◄► to narrow the vertical size of the projected image.  
H Shit: Use ◄► to move the narrowed projected image horizontally. This function is  
only available when the projected image is narrowed�  
V Shift: Use ◄► to move the narrowed projected image vertically. This function is only  
available when the projected image is narrowed�  
Reset: Set the H/V Alignment back to the factory default value�  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
OSD Menu - CONTROL  
PICTURE  
CONTROL  
INPUT  
LAMP  
Standard  
Off  
ALIGNMENT  
SERVICE  
Standby Mode  
Auto Power off  
<
<
<
>
>
>
Auto Power On  
Network  
Off  
Enter  
RS232  
Enter  
Off  
Startup Logo  
Trigger  
<
<
<
<
>
Off  
>
>
>
Auto Search  
Dynamic Black  
3D  
Off  
Off  
Enter  
Enter  
Language  
Standby Mode  
Use the ◄► function for "Standard" or "Eco" setting.  
Standard Model: The projector can be turned on using the remote control, RS-232  
command or network control�  
Eco: The projector maintains in the standby status at the lowest power (<0�5W)� In this  
mode, the projector can be turned on only using the power switch on the remote control  
or projector�  
Auto Power Off  
This function is set to OFF by default� When it is set to ON and no input signal is  
received within 20 minutes, the projector will turn off automatically�  
Auto Power On  
This function is set to OFF by default� When it is set to ON, the projector will turn on  
automatically when you connect it to an AC power source� When you plug the power  
cable of the projector in an AC socket attached with a switch, you can use this function  
and the power switch (instead of the remote control) to turn on the projector� Set this  
function to OFF if you do not need to use it�  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
PICTURE  
CONTROL  
INPUT  
LAMP  
Standard  
Off  
ALIGNMENT  
>
SERVICE  
Standby Mode  
Auto Power off  
<
<
<
Network  
>
>
IP Address  
<
<
<
xxx.xxx.xxxx.xxx  
255.255.255.0  
xxx.xxx.xxxx.xxx  
Off  
>
>
>
Auto Power On  
Network  
Off  
Enter  
Enter  
Subnet  
Gateway  
DHCP  
RS232  
Startup Logo  
Trigger  
<
<
<
<
Off  
Off  
>
Apply  
Apply  
>
>
>
Auto Search  
Dynamic Black  
3D  
Off  
Off  
Enter  
Enter  
Language  
Network  
Use this function to set up network configurations so that you can control the projector  
via the network�  
Use ▲▼ and the Enter button to select Network and network settings:  
IP Address: To specify an IP address, press the Enter button to show the IP address  
input window. Use the ◄► button to select the number in the address to be changed.  
Use the ▲▼ button to increase or decrease the number in the IP address.  
Network  
IP Address  
172 . xxx . xxx . xxx  
Subnet: Set the subnet� The input method is same as the IP address�  
Gateway: Set the gateway� The input method is same as the IP address�  
DHCP: Set DHCP to ON/OFFWhen DHCP is set to ON, the DHCP server of the  
domain will assign an IP address to the projector� The IP address will appear in the IP  
address window and you don't need to make any input� Otherwise, the domain does  
not or cannot assign any IP address, and 0� 0� 0� 0 is shown on the IP address window�  
Apply: Select this button and press Enter� It takes the projector several seconds to  
execute the change of the network setting till the following message disappears�  
Setting network configuration, please wait  
For more information about the network control connection and setting, refer to Remote  
Control Guide�  
RS232  
Baud Rate: Set the transmission rate to 115200, 57600, 38400, 19200, 14400, 9600,  
4800, 2400 or 1200� The setting of the transmission rate is dependent on the length of the  
RS-232 cable� Low transmission rate is usually set for long transmission cables� If RS-232  
is used for remote control and the signal is unstable or no communication is connected,  
select a suitable transmission rate�  
Channel: The RS232 control command can be sent to the projector through its  
RS-232 port� The command can also be sent to the projector through the external  
HDBaseT connecting to the RJ-45/HDBaseT port� Set the following communication  
channels before sending the control command:  
Local: The RS-232 control command is sent through the RS-232 port on the  
projector� Select an appropriate transmission rate�  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
HDBaseT: Transmission is conducted from the external HDBaseT to the RJ-45/  
HDBaseT port on the projector� The transmission rate is switched to 9600�  
Note:  
• When the Standby Mode is set to the Eco Mode, the LAN and RS-232 control function is turned off.  
Therefore, the projector can only be turned on using the remote control or the button on the projector.  
Before using RS232 or LAN control, set the Standby Mode to Standard.  
Startup Logo  
Use the ◄► function to turn on/off the Startup Logo.  
Trigger  
The projector is provided with a set of trigger output� When automatic screen equipment  
is available, connect it to the screen trigger of the projector using the cable� The screen  
automatically turns on when the projector is powered on� There is a 2-3 second delay  
before this function is activated�  
5:4: When the 5:4 aspect ratio is selected, the trigger outputs 12V power�  
4:3: When the 4:3 aspect ratio is selected, the trigger outputs 12V power�  
16:10: When the 16:10 aspect ratio is selected, the trigger outputs 12V power�  
16:9: When the 16:9 aspect ratio is selected, the trigger outputs 12V power�  
1�88: When the 1�88 aspect ratio is selected, the trigger outputs 12V power�  
2�35: When the 2�35 aspect ratio is selected, the trigger outputs 12V power�  
Letterbox: When the aspect ratio having the letterbox shape is selected, the trigger  
outputs 12V power�  
Standard: When the native aspect ratio is selected, the trigger outputs 12V power�  
Unscaled: When the unscaled aspect ratio is selected, the trigger outputs 12V power�  
Auto: The trigger automatically outputs 12V power�  
Auto Search  
Use the ◄► function to turn on/off Auto Search.  
Dynamic Black  
Use the ◄► function to turn on/off Dynamic Black.  
3D  
Set the 3D format and sync method� The projector detects the type of the connected  
input signal and provides relevant options for setting� The unavailable option is displayed  
using light green texts� Before performing the 3D setting, ensure that the input signal is  
connected� When there's no input signal, no 3D setting shall be performed�  
PICTURE  
CONTROL  
3D  
INPUT  
LAMP  
Standard  
Off  
ALIGNMENT  
>
SERVICE  
Standby Mode  
Auto Power off  
<
<
<
3D Format  
Enter  
On  
>
>
DLP Link  
<
<
<
>
>
>
Auto Power On  
Network  
Off  
Enter  
3D Swap  
Normal  
96Hz  
RS232  
Enter  
Off  
3D 24Hz Display  
Startup Logo  
Trigger  
<
<
<
<
>
3D Format  
Execute  
Off  
>
>
>
Off  
Auto Search  
Dynamic Black  
3D  
Off  
Execute  
Execute  
Auto  
Off  
Side by Side  
Enter  
Enter  
Execute  
Execute  
Top / Bottom  
Language  
Frame Sequential  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
3D Format: Select this option and press the Enter button to enable 3D replay and set  
3D option�  
Off: Turn off the 3D Display Mode� When Auto, Side by Side, Top/Bottom or Frame  
Sequential is selected, the 3D Mode will be turned on� To turn off the 3D Mode,  
select "Off" and press the Enter button.  
Auto: Enable the 3D format to automatically detect the formats of Frame Packing,  
Top/Bottom, Side by Side and Frame Packing�  
This function may only be enabled for the input signal below  
The input signal is HDMI 1�4a 3D�  
The HDMI 1�4a 3D signal connects to the projector through the HDBaseT  
transmitter�  
-
-
Side by Side: Manually switch the 3D Format to Side by Side� This option is only  
applicable to the HDMI input signal or the HDMI signal sent using the HDBaseT  
transmitter�  
Top/Bottom: Manually switch the 3D Format to Side by Side� This option is only  
applicable to the HDMI input signal or the aforementioned signal sent through the  
HDBaseT transmitter�  
Frame Sequential: Set the format to Frame Sequential�  
DLP Link: Set to activate or deactivate the DLP Link sync�  
3D Swap: If the 3D imaged viewed through the 3D glasses for the left and right eyes  
are inverse, set the 3D Swap to "Inverse". If the images are normal, keep the current  
setting as Normal�  
3D 24Hz Projection: Set the 3D 24Hz image frame rate to 144fps or 96fps� This option  
is only applicable when the input signal is 24Hz�  
Note:  
• The projector provides DLP Link and 3D IR sync. After the 3D Mode is enabled, the built-in DLP Link or  
external 3D IR transmitter can be used to synchronize the signal of the 3D glasses. Or, you may turn off  
the DLP Link sync signal and only select the external 3D IR transmitter to synchronize the 3D signal.  
Important reminder:  
The people listed below shall be aware when watching 3D images:  
Children under six years in age  
People who are allergic to light, unhealthy and have the history of cardiovascular  
disease�  
-
-
People who are tired or lack of sleep  
People who are under the impact of drug or alcohol  
-
-
Normally, it's safe to watch 3D images� However, some people might feel uncomfortable�  
Refer to the guidelines revised and released by the 3D League on December 10, 2008�  
People need to take a break for at least 5 to 15 minutes every thirty minutes or one hour�  
Language  
Select the familiar OSD Menu language� English, French, Spanish, German,  
Portuguese, Simplified Chinese, Traditional, Japanese and Korean�  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
OSD Menu - SERVICE  
PICTURE  
CONTROL  
SERVICE  
INPUT  
Model :  
LAMP  
ALIGNMENT  
DU6871  
XXXXXXX  
Serial Number :  
Software Verison :  
Active Source  
Pixel Clock  
MPxx-0Dxx-UDxx-RDxx-SExx-PDxx-xxxx  
VGA  
64.977 MHZ  
1024x768 @60Hz  
H: 49.578 KHZ V: 60 HZ  
168 HRS  
Signal Format  
H/V Refresh Rate :  
Lamp 1 Time  
Lamp 2 Time  
Power On Time  
Blue Only  
168 HRS  
168hrs  
<
Off  
>
Factory  
Execute  
The functions of the projector are related to the display of some basic information of the  
projector�  
Model  
Projector model name�  
Serial Number  
Projector serial number�  
Software Version  
The version of the software installed in the projector�  
Active Source  
Display the current source�  
Pixel Clock  
Display the pixel clock of the current input signal�  
Signal Format  
Display the format of the current input signal�  
H/V Refresh Rate  
Display the H/V refresh rate of the current image�  
Lamp 1 Time  
Display the using hours of Lamp 1�  
Lamp 2 Time  
Display the using hours of Lamp 2�  
Power On Time  
Display the operation Time�  
Blue Only  
The projector only displays blue when this option is enabled� This can help the  
maintenance personnel to inspect the image� Contact professional maintenance  
personnel for the details about the way to use this function�  
Factory Reset  
Use this function to restore the configuration of the menu to the factory default setting�  
All of the user setting options of the projector will be deleted and restored to the factory  
default settings�  
Note:  
• Restoration to factory default settings will not delete and reset the lamp hours.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Replacing the Lamps  
Depending on the lamp model, the lamp life is affected by the installation method and frequency  
of the lamp on/off operation� It is suggested to replace the projector lamp when the lamp is used  
for approximately 1500 hours to ensure high projection quality� In the OSD Menu, the lamp  
using time can be checked from the "OSD Menu - Service". The lamp should be replaced when  
the projected image is obviously darkened� Contact your local dealer to purchase the authorized  
new lamp suitable for your projector�  
Note:  
• Purchase the lamp module produced by Vivitek. Using the lamp that is not made by Vivitek may affect the  
performance of the projector or damage the projector.  
How to replace the projector lamp  
1� Turn off the projector and unplug the power cord� Wait till the projector, lamp and  
peripheral devices to cool off� Then remove the lamp module for replacement�  
Note:  
• When the projector is just turned off, the temperature of the lamp inside the projector is still very high (about  
200~300°C). You might be burnt if attempting to replace the lamp when the projector is not cooled off. The  
lamp can be replaced safely when the lamp is cooled off.  
2� Remove the screw with the screwdriver  
3� Remove the screw with the screwdriver  
and take the lamp cover out  
and take the old lamp out  
4� Insert the new lamp following the  
5� Tighten 3 screws on the lamp with the  
direction of the original lamp  
screwdriver , install the lamp cover  
and use the screwdriver to tighten the  
2 screws on it  
Note:  
• After inserting the new lamp and tightening the 3 screws, please make sure the lamp is installed properly.  
Improper lamp installation may cause to system protection when projector is turned on. In this case, please  
double check if lamp is installed properly.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Installing or Removing the Projection lens  
1� Remove the lens cover if the lens is not installed in the projector�  
Pull the edge of the lens cover with one hand (  
), so that the lens cover can be  
removed easily with the other hand (  
)�  
1
2
2� If the lens is installed in the projector, press the release button and support the lens  
with one hand� Turn the lens counterclockwise to loosen it and pull it from the holder�  
3� Align the " " symbol on the lens label with the " " symbol on the top of the body (align  
to the center of the lens hole)� Make sure the lens is pushed into the holder and turn  
it clockwise to the "Lock" position. When turning the lens, the "Click" sounds twice to  
indicate that the lens is completely fixed.  
Arrow up  
4� Try to pull the lens out of the holder gently to check if the lens is fixed.  
Note:  
• When removing the lens, make sure you press and hold the release button to loosen and unlock the lens  
from inside of the projector.  
• The projector supports the lens memory function. Perform the memory function every time when you install  
the lens.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Replacing the filter  
The dirtiness and replacement interval of the filter may vary depending on the dustiness  
of the environment. It is recommended to conduct regular check of the filter to achieve the  
best projector performance�  
Note:  
• Dirty filter may reduce the air flowing into the projector and the temperature in the projector may rise as a  
result. This may activate the protection mechanism or damage the components.  
• Check, clean and replace the filter regularly.  
• It is recommended to replace the filter every time when you replace the lamp.  
Replace the filter on the left side  
of the projector  
Replace the filter on the right side  
of the projector  
1� Pull the filter cover of the shield away  
1� Pull the filter cover of the shield away  
from the front left side ( ) and remove  
from the front right side (  
) and  
the filter to the front( )�  
remove the filter to the right (  
)�  
2� Install a new filter ( ) and place the  
2� Install a new filter (  
) and place the  
shield on the front side to complete the  
shield on the front side to complete the  
replacement ( )�  
replacement (  
)�  
  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Changing the Color Wheel  
1� The color wheel cover is located on the top cover of the projector� Loosen the screw of  
the color wheel cover with a screwdriver, and open the color wheel cover�  
2� Loosen the 4 screws on the color wheel and remove the color wheel as shown in the  
figure below.  
3� Put in the color wheel to be installed and tighten the 4 screws on the color wheel�  
4� Place the lamp cover and use the screwdriver to tighten the screw on the color wheel cover�  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
LED indicator status  
Power LED indicator  
LED display  
Off  
Projector status  
AC power off  
Recommended actions  
Use the AC power to turn on the projector  
Ready to turn on the  
projector  
Green  
Wait for the projector to display  
Flashing  
Light up  
Orange  
Projector cooling  
Wait till the cooling is complete (~120 seconds)  
To turn on the projector, press the ON button on the  
remote control or the Power button on the control panel�  
Red  
Standby Mode  
Projector on  
Green  
Status LED indicator  
LED display  
Off  
Projector status Recommended actions  
Normal  
Make sure if the color wheel cover is properly  
Red (1 times) Shield breakdown  
mounted� If the failure can't be repaired, contact the  
local VIVITEK service center�  
Contact the local VIVITEK service center�  
Contact the local VIVITEK service center�  
Flashing  
Light up  
Red (4 times) Fan breakdown  
Red System error  
Lamp 1/Lamp 2 LED indicator  
LED display  
Off  
Projector status  
Lamp off  
Recommended actions  
Green  
Ready to light up  
Flashing  
Light up  
Red (6 times) Lamp can't light up  
Red  
Contact the local VIVITEK service center�  
Contact the local VIVITEK service center�  
Lamp service life ends  
Projector lamp operates  
normally�  
Green  
Temperature LED indicator  
Projector  
status  
Normal  
LED display  
Recommended actions  
Off  
Make sure the filter is not dirty, the intake or vent is not obstructed  
and the fan setting is correct� If the failure can't be repaired, contact  
the local VIVITEK service center�  
Abnormal  
temperature  
Flashing  
Red  
Shutter LED indicator  
LED display  
Off  
Projector status  
Shutter on  
Recommended actions  
Flashing  
Green  
Shutter off  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
DU6871/DW6851/DX6831 specifications  
Model  
DU6871  
DW6851  
DX6831  
Display type  
Typical brightness  
Native resolution  
DLP  
7300 ANS lumens  
WUXGA (1920x1200) WXGA (1280x800)  
7000 ANS lumens  
8000 ANS lumens  
XGA (1024x768)  
Maximum resolution WUXGA (1920x1200) @ 60Hz  
Contrast  
3000:1  
2000/2500 hours (Standard/Eco mode), 400Wx2  
Lamp life and type  
Throw Ratio*  
Image Size*  
1�73-2�27:1  
1�81-2�38:1  
40~500"  
1�79-2�35:1  
40~500"  
40~500"  
Projection Distance* 1�83-14�9m  
(6-49ft)  
1�93-15�64m  
(6�3-51�31ft)  
1�79-14�54m  
(5�87-47�07ft)  
Projection Lens*  
F=1�64-1�86  
f=26-34mm  
1�3X  
Zoom Ratio*  
Aspect Ratio  
16:10 Normal  
16:10 Normal  
4:3 Normal  
4:3 compatible with 4:3 compatible with 16:10 compatible with  
16:9 16:9 16:9  
Lens Shift*  
Keystone  
Sync  
0%~+50% (V); +/-10% (H)  
V: +/-30°  
V: 48-120Hz  
H: 15-108kHz  
Yes (built-in)  
Edge blending  
Video compatibility  
I/O Port  
SDTV (480i/576i), EDTV (480p/576p), HDTV (720p, 1080i/p)  
HDMI v1�4, DVI-D, DisplayPort, 3D Sync Out, HDBaseT (share  
with LAN control), RGB In, RGB Out, Component (YPbPr)/RGBHV,  
RS-232C, Screen Trigger, Wire (wired remote control), USB (repair  
port)  
Projection Method  
Size (W x D x W)  
Weight  
Desktop projection, ceiling (front or rear)  
504x520x193mm (19.8"x20.5"x7.6") (excluding the protruding part)  
20kg (44�1lbs)  
(excluding the lens)  
Noise level  
POWER  
35dB/40dB (Dual-lamp Eco/Standard Mode)  
AC100-240V, 50/60Hz  
Power Consumption Standby: 0�5W (No RJ-45, RS-232 activation)  
Accessories  
AC power cord, VGA cord, remote control, lens cap,  
user manual CD  
* Standard Lens  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Outline Dimensions  
504mm  
AUTO  
CENTER  
LENS  
POWER INPUT SYNC ASPECT  
SHUTTER  
DVI-D  
G/Y  
Display Port  
3D Sync Out  
RGB IN  
HDMI  
H
HDBaseT / LAN  
LENS  
SHIFT  
FOCUS ZOOM  
RGB OUT  
R/Pr  
B/Pb  
V
MENU  
EXIT  
RS-232  
TRIGGER USB  
WIRE  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
Supported Signal Input Timing  
Computer  
Component BNC  
VGA  
HDMI/HDBaseT  
Signal type  
Resolution  
Frame rate  
DVI-D  
DisplayPort  
RGBHV  
YUV  
RGBHV  
YUV  
RGB  
YUV  
640x480  
59�94  
75  
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
640x480  
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
640x480  
85  
800x600  
75  
800x600  
85�06  
47�95  
59�94  
60  
848x480  
848x480  
1024x768  
1024x768  
1024x768  
1280x720  
1280x768  
1280x800  
1280x960  
1280x1024  
1280x1024  
1280x1024  
1366x768  
1440x900  
1600x1200  
1920x1080  
75�03  
85�03  
47�95  
59�87  
59�81  
60  
PC  
60�02  
75�02  
85�02  
59�79  
59�887  
60  
47�95  
59�94  
1680x1050  
1920X1200  
60  
V
V
V
V
V
(Reduce Blanking)  
1400X1050  
60  
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
640x480  
66�59  
74�54  
75  
Apple Mac 832x624  
1152x870  
1440x480i  
SDTV  
60  
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
1440x576i  
50  
480p  
576p  
1080i  
1080i  
1080i  
720p  
720p  
59�94  
50  
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
50  
59�94  
60  
50  
59�94  
60  
720p  
EDTV  
1080p  
23�98  
24  
1080p  
1080p  
1080p  
1080p  
1080p  
1080p  
1080p  
25  
29�97  
30  
50  
59�94  
60  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
3D Signal Input Mode  
Signal  
type  
Resolution  
640x480  
Frame rate Frame Packing  
Side by Side  
Top/Bottom  
Farm Sequential  
59�94  
47�95  
59�94  
60  
V
V
V
V
V
V
V
V
V
V
V
V
V
V
848x480  
848x480  
1024x768  
1280x720  
1280x768  
1280x800  
1280x960  
1280x1024  
1366x768  
1440x900  
1600x1200  
1920x1080  
47�95  
59�87  
59�81  
60  
PC  
60�02  
59�79  
59�887  
60  
47�95  
59�94  
1680x1050  
1920X1200  
60  
V
V
(Reduce Blanking)  
1400X1050  
60  
1080i  
1080i  
720p  
59�94  
60  
V
V
50  
V
V
V
V
V
V
V
V
V
V
V
V
V
720p  
59�94  
60  
720p  
EDTV  
1080p  
1080p  
1080p  
1080p  
1080p  
23�98  
24  
50  
V
V
V
59�94  
60  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
DU6871/DW6851/DX6831 lens series  
7 types of optional electric lenses are available for the projector� Contact the authorized  
dealer of Vivitek for details�  
Throw Ratio  
Zoom  
Ratio  
Screen  
Size  
Part Number  
Lens Name  
F Number  
Focal Length  
DU6871  
0�75-0�93:1 0�78-0�99:1 0�77-0�97:1  
0�76:1 0�8:1 0�79:1  
DW6851  
DX6831  
D88-UWZ01  
D88-WF18501  
D88-WZ01  
Ultra Wide Zoom 1�96-2�3  
11�3-14�1mm  
11�6mm  
1�25:1  
40"-500"  
40"-500"  
40"-500"  
40"-500"  
40"-500"  
40"-500"  
40"-500"  
Wide Fix  
1�85  
---  
Wide Zoom  
Standard Lens  
1�85-2�5  
1�7-1�9  
18�7-26�5mm  
26-34mm  
1�41:1  
1�3:1  
1�65:1  
1�5:1  
1�25-1�79:1 1�31-1�87:1 1�3-1�85:1  
1�73-2�27:1 1�81-2�38:1 1�79-2�35:1  
2�22-3�67:1 2�33-3�86:1 2�3-3�81:1  
3�58-5�38-1 3�76-5�64:1 3�71-5�57:1  
5�31-8�26:1 5�56-8�67:1 5�5-8�56:1  
D88-ST001  
D88-SMLZ01  
D88-LOZ101  
D88-LOZ201  
Semi Long Zoom 1�86-2�48  
32�9-54�2mm  
52�8-79�1mm  
Long Zoom 1  
Long Zoom 2  
1�85-2�41  
1�85-2�48  
78�5-121�9mm 1�55:1  
Above lenses can support to vertical shift 0-50%, horizontal shift ±10% except of D88-WF18501�  
• D88-WF18501 is a fixed lens, the vertical and horizontal shift range is 0%, the corners of the projected  
image may appear shadows or distortion if lens is shifted horizontally or vertically�  
Projector lens supports Lens memory function, please perform Center Lens function after changing the  
lens� If you do not perform this function, the projector will not be able to get an accurate lens parameters,  
some of lens control features may not be accurate action�  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DU6871/DW6851/DX6831 DLP Projector - User's Manual  
About the VIVITEK support  
If you have any problems with the setting or operation of the projector, refer to Chapter  
"Status LED indicator" on page 48. If you cannot find solutions from this user guideline,  
please contact us using the contact information below�  
North America  
Vivitek Service Center  
15700 Don Julian Road, Suite B  
City of Industry, CA� 91745  
U�S�A  
Tel: 855-885-2378 (Toll-Free)  
Email: Tservices1@vivitekcorp�com  
URL: www�vivitekusa�com  
Europe, Middle East and Africa  
Vivitek Service & Support  
Zandsteen 15  
2132 MZ Hoofddorp  
The Netherlands  
Tel: +31 20 655 0960  
Email: support@vivitek�eu  
URL: www�vivitek�eu  
China  
Vivitek Service Center  
上海浦东世纪大道 1090 号斯米克大厦 18 1802 室,201209  
Tel: 400-888-3526 (Toll-Free)  
Tel: 021-58360088-142 (Direct)  
Email: service@vivitek�com�cn  
URL: www�vivitek�com�cn  
Asia and Taiwan  
VIVITEK after-sales service  
Vivitek Corporation, Co�, Ltd�  
4F, No�186, Ruiguang Rd�, Neihu Dist�, Taipei City 11491  
TEL: 86-28-797-2088  
FAX: 86-26-600-2358  
E-mail: kenny�chang@vivitek�com�tw  
URL: www�vivitek�com�tw  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Thermador Ventilation Hood VTI1010D User Manual
Toshiba Barcode Reader B 411 SERIES User Manual
Toshiba Personal Computer A205 S7458 User Manual
TRENDnet Network Router TEW811DRU User Manual
Troy Bilt Tiller 643B User Manual
Tyco Motorized Toy Car H9283 User Manual
Uniden Cordless Telephone DWX207 User Manual
ViewSonic Computer Monitor VA2016W User Manual
Vizio Flat Panel Television E190VA User Manual
Weed Eater Lawn Mower Accessory 532 43 46 60 User Manual