Vivitar Digital Camera F536 User Manual

ViviCam F536 Digital Camera

User Manual

Windows and the Windows logo are registered trademarks of Microsoft Corporation.

All other trademarks are the property of their respective companies.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Thank you for purchasing this camera. Everything you need to take quality digital photos and

videos is included with your camera.

Vivitar makes capturing those special moments as easy as possible.

Please read this manual carefully first in order to get the most out of your digital camera.

Note: Your camera needs an SD Memory card (up to 32GB) for normal use.

SD Memory cards are not included and need to be purchased separately.

What’s Included

1. Digital Camera

2. Lithium Battery

3. USB cable

4. Vivitar Experience Image Manager

software Installation CD

5. AC Charger

6. Wrist Strap

Note: SD Memory Card not included

Download from Www.Somanuals.com. All Manuals Search And Download.

Parts of the Camera

1. Shutter Button

2. Power Button

3. Flash Light

4. Microphone

5. Auto Focus Light

6. LCD Screen

7. LED

8. Zoom Out

9. Zoom In

10. Wrist Strap Connector

11. MODE Button

12. Flash/Up/Slide Show Button

13. Delete/Right Button

14. ViviLink/Down Button

15. SET Button

16. Scene/Left Button

17. USB Slot

18. Speaker

19. Optical Lens

20. Tripod Socket

21. Battery Compartment

22. SD Memory Card Slot

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Camera Setup

Installing the Batteries

Installing the Memory Card

Charger Battery Before Use:

 Insert the battery (as shown above).

 Power Off the camera.

 Connect the camera with the

supplied USB cable either to the AC

Charger or to the computer.

Insert SD Memory card (up to 32GB) before

use.

 A charge light will turn off when the

battery is fully charged.

Turning On the Camera

Using the Camera

Selecting

the modes

Accessing the menu

Download from Www.Somanuals.com. All Manuals Search And Download.

When powering the camera ON for the first time the camera will take you through the initial

camera setup.

Powering the Camera ON

1) Make sure the charged lithium battery has been inserted properly into your digital camera.

To charge the lithium battery:

 Insert the battery into the camera.

 Power Off the camera.

 Connect the camera with the USB cable either to the AC adapter or to the computer.

 A charge light will turn on when the battery is fully charged.

2) Make sure an SD card has been properly inserted into your camera (until a click sound is

heard).

Note: After the camera is powered on, an SD icon will appear on the LCD display.

If you do not see the SD icon on the display, please check if the card was inserted properly.

3) Press the POWER button

to turn on the camera.

Setting the Camera Language

1) You will first be prompted to select a language for the camera.

The Language selection menu will appear.

Select the language of your choice and press the SET button to confirm the selection.

2) After selecting a language, you will be asked if you would like to continue with the initial

camera setup.

A message will appear: “Continue with Camera Setup?”

Select “Yes” to continue or “No” to exit the setup.

Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default

settings. These settings can be adjusted at any time manually through the menus in the camera.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Date and Time

The next step in the initial camera setup is to set the date and time on the camera.

Set the Date and Time as Desired and press the SET button to confirm the selection and move to

the next part of the camera setup.

Setting the ViviLink Default Option

Once the Date and Time have been set, you will be asked to set the default ViviLink destination

for photos and videos taken with your camera.

The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos

to the social networks of your choice with the accompanying software application.

1) First you will be asked to choose the default ViviLink social network for Photos.

Highlight the desired default social network and press the SET button to confirm the

selection.

2) Next you will be asked to choose the default ViviLink social network for Videos.

Highlight the desired default social network and press the SET button to confirm the

selection.

3) After the ViviLink Video option is confirmed the camera is now ready to use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Main Camera Modes

Your camera has different modes for the various camera functions.

You can switch modes by pressing the MODE button on your camera after the camera has been

powered ON.

Photo Capture Mode

Use this mode to capture pictures with your camera.

This is the default mode when the camera is powered ON.

To take a picture, aim your camera as desired and press the Shutter button.

The picture will be automatically saved to your camera‟s memory card.

To access the various menus for the Photo Capture mode, press the SET button while in

the Photo Capture mode.

Video Capture Mode

Use this mode to capture videos with your digital camera.

After turning on your camera, press the MODE button once to open the Video Capture

mode. To take a video, aim your camera as desired and press the Shutter button to start

the record. A red record indicator will appear on the LCD screen while record is in progress.

To stop the record, press the Shutter button again. The video will be automatically saved to

your camera‟s memory card.

To access the various menus for the Video Capture mode, press the SET button while in the

Video Capture mode.

Playback Mode (Photos & Videos)

Use this mode to view and manage the photos and videos on your camera.

After turning on your camera, press the MODE button twice to open the Playback mode for

photos and videos. You can scroll through the photos and videos that you‟ve previously

taken to view, edit or delete them as desired.

To access the various menus for the Playback mode for photos and videos, press the SET

button while in the Playback mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Camera Technical Specifications

Image Sensor

CMOS Sensor

(14M) 4416x3312 pixels, (12M) 4000x3000 pixels,

(10M) 3648 X 2736 pixels, (9M) 3456 x 2592 pixels),

(8M) 3264 X 2448 pixels, (7M HD) 3648X2048 pixels,

(5M) 2592x1944 pixels, (3M) 2048x1536 pixels,

(2M HD) 1920x1080 pixels and (VGA) 640x480 pixels

Image Resolution

Video Resolution

File Format

640X480 pixels (30 fps), 320X240 pixels (30 fps)

JPEG/AVI

Internal Memory

External Memory

LCD Display

Lens Focus Length

Zoom

1 Test Photo Use Only

SD Card (up to 32GB)

2.4 Inch TFT

f=6.0-18mm F3.0-5.5

4X Digital Zoom

Exposure

-3.0EV ~ +3.0EV

White Balance

ISO

Auto, Daylight, Cloudy, Fluorescent , Incandescent

Auto / 100 / 200 / 400

Auto / Scenery / Portrait / Night Scenery / Night Portrait /

High Sensitivity / Sport / Beach / Party

Scene

Flash

Auto/Force/Red Eye Reduction/Off

Print Photos

Self-Timer

Anti-Shake

Face Detect

Smile Capture

Macro

Yes

2, 5 or 10 second delay

Yes

Interface

USB 2.0 (HS)

System Requirements Windows XP and above / Mac OSX 10.5 and above

Battery

Lithium Battery 4.2V(Nokia BL-5B)

Working Temperature

0~40C

Download from Www.Somanuals.com. All Manuals Search And Download.

Computer System Requirements – WINDOWS OS

To be able to download photos and videos to your PC, you will need the following minimum

configuration:

 Pentium 4 processor or above with Windows XP service pack 2, Windows Vista or Windows 7

 512 MB RAM, with 100MB of free disk space

 1024 x 768 Recommended screen resolution

 16-bit color or higher display adaptor

 CD-ROM Drive

 QuickTime 6 or higher

 Microsoft Internet Explorer 7 or higher

 Windows Media Player 10 or higher

 Internet connection required

Computer System Requirements – MAC OS

 Macintosh with Intel processor running Mac OS X v10.5 or later

 256 MB RAM, 100 MB free disk space

 Display: 1024 x 768 or higher-resolution monitor

 QuickTime 6 or higher

 Internet connection required

Download from Www.Somanuals.com. All Manuals Search And Download.

Powering ON/OFF Your Digital Camera

 Make sure the batteries have been inserted properly into your digital camera. If your camera

comes with a rechargeable lithium battery, make sure it is fully charged before the first use.

 Make sure an SD card has been inserted into your camera.

(SD card up to 32GB - SD Card not included)

Powering the camera ON

Press the Power

button to turn your camera ON. The camera will be in Photo Capture mode

to start.

Powering the camera OFF

While the camera is on, you can press the Power

button again at any point to turn your

camera OFF. You will see a “Goodbye” splash screen and then the camera will power off

completely.

Note: Your digital camera also has an Auto Power Off feature that will automatically turn off your

camera after a specific period of time that your camera is left idle. The Auto Power Off settings

can be set from the Auto Power Off settings in the Video/Photo Capture Mode menu.

Changing Camera Mode

Your camera has three main modes:

1) Photo Capture Mode - Use this mode to capture photos with your camera.

2) Video Capture Mode - Use this mode to capture videos with your camera.

3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos

you have already taken with your camera.

When the camera is first powered ON, the Photo Capture Mode will be active. The icons that

appear on the LCD screen are the best default settings so that you can begin to capture and

enjoy clear quality photos.

Download from Www.Somanuals.com. All Manuals Search And Download.

To change the active camera mode, make sure the camera is powered ON and press the MODE

button on the back of the camera.

When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display

When in Video Capture Mode, this icon will display on the top-left corner of the LCD display

When in Playback Mode, this icon will display on the top-left corner of the LCD display

Navigating the Menus

Each camera mode has a set of menus specific to that mode.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll between the various menus for

the current mode.

3) Press the UP or DOWN direction control buttons to highlight the desired menu selection.

4) Press the SET button to select and save the highlighted menu option.

5) If the selection can be remembered by the camera, a

selection icon will appear to the

right of the selected menu option. Changes made to these options will remain as is until you

decide to change them again at a later time.

6) Some menu options are single-use functions that are not remembered by the camera and

do not display this icon when selected.

7) At any time you can press the MODE button to exit the menus and return to the previous

screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Photo Capture Mode

The Photo Capture mode allows you to capture pictures with your digital camera.

Taking a Picture

1) Turn on your digital camera.

The camera automatically opens to the Photo Capture Mode.

2) The

camera icon will appear on the top left corner of the LCD.

3) The amount of photos that can be captured with the available memory and as per the

selected resolution will appear on the top right corner of the LCD screen.

4) Use the LCD display on the back of the camera to direct the camera at the scene you would

like to capture.

Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.

Note: The actual shape of these buttons may vary per camera model.

Press the Shutter button on the top of the camera to capture and save your photo to the

memory card.

7) You can also capture your photos using the Flip Screen.

When you would like to quickly and easily include yourself in the photo, simply flip the LCD

display out and hold out the camera facing towards you.

Make sure you can see yourself within the scene on the LCD screen.

Then look at the lens and press the Shutter button to take the picture.

It‟s as easy as twist and shoot!

Note: HD is available for Photo Capture mode only and not for Video Capture Mode.

The lower the resolution setting the more photos can be taken. However lower resolution photos

are of less quality than photos taken at higher resolution.

Download from Www.Somanuals.com. All Manuals Search And Download.

Photo Capture Mode Quick Function Buttons

Your digital camera has a four-directional pad that functions as Quick Function buttons:

Quick Function Button

Left

Action

Scene Selection – Opens the Scene menu

Flash Options – Toggles the Flash options appearing on the LCD

Delete – Allows you to delete the last photo taken

Right

Down

Other

ViviLink – Opens the ViviLink for Photos menu

Captures the Picture

Shutter

SET

 Opens the menu options for Photo Capture Mode

 Saves your selected menu option

Note: To navigate through the Menus, use the Left, Up, Right, and Down

directions control buttons.

 Toggles between the Video Capture Mode, Photo Capture

Mode, and Playback Mode

MODE

 Exits the menu screen

Zooms In

Zooms Out

Hide/Show the LCD Icons

The display of the icons on the LCD screen can be hidden or visible as desired.

1) Hold the MODE button for 2 seconds to hide the display of the icons on the screen.

2) Press the MODE button again to redisplay the icons on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Flash Options

There are several Flash options available on your camera. The options appear on the Photo

Capture Mode LCD screen in sequence.

To change the Flash mode, press the UP Quick Function button until you arrive at your desired

settings.

Note: The Macro mode must be turned OFF when you want to use the Flash.

To change the Macro setting:

- Press SET to open the menus and scroll to the „Macro‟ menu.

- Select „Off‟. (See the section titled „Macro Menu‟ for more details).

When Macro is OFF, the mountain icon appears on the LCD display.

Flash Type

Description

 No flash will appear.

 Use this when you do not want to activate Flash.

Forced Off (Default)

 When you want the camera to determine if Flash is needed, select

Auto Flash.

Auto Flash

 The flash will automatically turn on according to the lighting

conditions.

 Note: An initial flash appears to test your lighting conditions. If

flash is needed, a second flash will appear upon taking the photo.

 The flash is enabled for each photo.

 Note: If you use this option in a well lit environment, your photo

may be appear too bright/light (overexposed).

 Eliminates the red-eye effect in a photo caused by flash.

Forced On

Red Eye

Download from Www.Somanuals.com. All Manuals Search And Download.

Photo Capture Mode Menus

The following are the menus that appear in your camera‟s Photo Capture Mode:

Download from Www.Somanuals.com. All Manuals Search And Download.

Scene Menu

The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to

your current environment.

NOTE: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the

FLASH automatically (if it‟s ON) to optimize the picture quality. If however, you would like to

override it and manually turn ON the Flash – you can do so.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Image Resolution Menu

The Image Resolution menu allows you to choose the desired size of the images taken by your

camera. Keep in mind that images with a higher resolution will also take up more of your

camera‟s memory.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Resolution

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Image Quality Menu

The Image Quality menu allows you to select the desired quality level of the images taken by your

camera. Keep in mind that images with a higher image quality level will also take up more

memory on your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Quality

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Self-Timer Menu

The Self-Timer menu allows you to set a delay between the time that the camera‟s Shutter button

is pressed and the actual capture of the picture.

This is an optimal feature if you don‟t just want to take the picture but would also like to be in the

picture yourself. Just set the desired Self-Timer delay, press the Shutter button on your camera

and position yourself in front of the camera as desired.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Self-Timer menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

Download from Www.Somanuals.com. All Manuals Search And Download.

4) Press the SET button to select and save the desired option.

5) selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Anti-Shake Menu

The Anti-Shake feature reduces image distortion that can be caused by movement of the camera

while capturing the image.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Anti-Shake

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Face Detect Menu

The Face Detect feature when set to „On‟ allows the camera to use a subject‟s face as the basis

for balancing the other colors and focus in the camera‟s display. This feature is meant to ensure

that the color and focus of your pictures will be consistently sharp and high-quality.

Note: To properly use the Face Detect option, please ensure the following:

 Macro mode off - Ensure that the Macro is set to „Off‟. Face Detect will not work if the camera

is in Macro mode.

When Macro is off, the mountain icon appears on the LCD display.

The Macro option is „Off‟ by default when you start using your camera

 Anti-Shake - Ensure that the Anti-Shake option is set to „On‟. The Anti-Shake option is „On‟ by

default when you start using your camera and assists you in properly focusing the image.

 Distance from the camera – The subject‟s face must be no further than 8 to 9 feet (3.5

meters) from the camera and the face must cover at least 20% (1 / 5th) of the picture as „seen‟

on the LCD screen.

 Facing the camera - The face of the subject(s) you are photographing must be facing the

camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears

around the subject`s face.

Face Detect will not work with a side shot of the subject`s head.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Face Detect

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Smile Capture Menu

The Smile Capture feature when set to „On‟ allows the camera to automatically take a picture

when it detects that a subject in the picture is smiling.

Note: To properly use the Smile Capture feature, please ensure the following:

 Macro mode off – Ensure that the Macro is set to „Off‟. Smile Capture will not work if the

camera is in Macro mode.

When Macro is off, the mountain icon appears on the LCD display.

The Macro option is „Off‟ by default when you start using your camera.

 Anti-Shake - Ensure that the Anti-Shake option is set to „On‟. The Anti-Shake option is „On‟ by

default when you start using your camera and assists you in properly focusing the image.

 Distance from the camera – The subject‟s face must cover a majority of the picture as „seen‟

on the LCD screen.

 Facing the camera - The face of the subject(s) you are photographing must be facing the

camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears

around the subject`s face.

Once a smile is detected the camera will automatically take the picture.

Smile Capture will not work with a side shot of the subject`s head.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Smile Capture

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Macro Menu

With the Macro feature you can capture images at close range (30 ~ 45 cm). To enable the Macro

mode, select

mode is ON.

„On‟. The flower icon

will appear on the LCD and indicates that the Macro

To return to the normal mode and disable the Macro mode, select „Off‟. The mountain icon

will appear on the LCD. When Macro mode is off, images can be captured from 1.5m - infinity.

Note:

 The Macro mode must be turned OFF when you want to use the following features of your

camera: Flash, Face Detect and Smile Capture.

 To turn Macro mode off, select the Macro „Off‟ option. The mountain icon

LCD.

will appear on the

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Macro menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

White Balance Menu

The White Balance feature allows your camera to adjust the coloring of the captured images

depending on the type of light source in the current environment.

Properly adjusting the White Balance setting to match your current environment will allow the

camera to properly balance the colors in the images that are taken with your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the White Balance

Download from Www.Somanuals.com. All Manuals Search And Download.

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Color Effect Menu

You can choose to add a color effect to the images taken with your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Color Effect

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Multi SnapShots Menu

When enabled, the Multi SnapShots feature allows you to take five rapid snapshots in a row with

a single click of the shutter button.

This feature can be effective when trying to capture a particular moment in a sporting event or

other scenes with quick movements.

1) Press the SET button to open the menus for the current mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Multi SnapShots

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Image Sharpness Menu

You can set the level of sharpness in the images taken with your camera. The sharpness level

dictates if the edges of objects in the image are more or less distinct.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image

Sharpness menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Light Exposure Menu

The Light Exposure setting helps you control the amount of light that enters your camera‟s lens.

This setting should be adjusted when the environment is lighter or darker than normal.

Download from Www.Somanuals.com. All Manuals Search And Download.

When the environment has more light than is needed, reduce the exposure setting (by using the

negative - count) to reduce the amount of light allowed into the lens by your camera.

If the environment has less light (darker) than is needed, increase the exposure setting (by using

the positive + count) to increase the amount of light allowed into the lens by your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Light Exposure

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

ISO Menu

The ISO menu allows you to set the level of sensitivity that your camera has to light in the

surrounding environment. When the ISO level is increased, the image sensor in your camera will

be more sensitive to light and allow you to capture images in lower-light situations. The higher

sensitivity to light however, may reduce the quality of the images that are taken.

When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will

optimize the image quality in environments with bright lighting.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the ISO menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

8) An icon reflecting your selection will display on the LCD screen

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Metering Menu

The Metering setting will affect how your camera focuses when capturing an image. Depending

on your selection, the camera will be more sensitive to focusing on particular areas in the display

and adjust the image color and lighting accordingly.

Center – Averages the light metered from the entire frame, but giving greater weight to the

subject in the center

Multi – Used in standard conditions the camera divides and adjusts the settings of the image into

several zones for light metering such as complex light conditions, position of subject, brightness,

background, direct light and scenes

Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure

on the subject in the center of the monitor.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Metering menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Menu

You can select your camera‟s language setting by selecting the desired language from the

Language menu.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Language menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Date/Time Menu

When you capture an image with your camera, the image will include a time stamp with the date

and time that the image was taken.

The Date/Time menu allows you to set your camera‟s date and time as desired. You can also

disable the timestamp for future images that will be taken with your camera.

On – The timestamp will appear on photos taken

Off – The date stamp will not appear on photos taken

To Enable/Disable the Timestamp:

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

Download from Www.Somanuals.com. All Manuals Search And Download.

setting or restore the camera‟s default factory settings.

To Set the Date and Time:

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.

3) Press the UP or DOWN direction control buttons to highlight the “Date Setup” menu option

then press the SET button to select the option.

4) The “Date Setup” submenu will open.

5) Scroll through the window with the RIGHT and LEFT navigation buttons.

6) For each field in the menu, use the UP and DOWN navigation buttons to set the date and

time.

7) When you have finished setting the date and time, press the SET button to save your

settings and return to the previous mode.

8) Press the MODE button to exit the menu without saving your settings and return to your

previous screen.

Silent Mode Menu

You have the option of activating the camera‟s Silent mode to disable all of the sound effects

(except for during the Self-Timer countdown) that the camera emits when performing camera

functions.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Silent Mode

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Power Off Menu

You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The

designated time represents when your camera will automatically power off.

When the camera sits idle for the designated period of time, the camera will shut off completely

and will need to be powered on again with the power button before the next use.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Auto Power Off

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Frequency Menu

The options in the Frequency menu represent the frequency of the electrical current in

fluorescent lighting sources in your locale. If your camera is set to a frequency that does not

match your country‟s electric current, you may see waves on the images taken by your camera.

50Hz – UK, Europe and Australia

60Hz – US, Canada and South America

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item

6) Press the LEFT or RIGHT button to select the next menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Format Memory Card Menu

You can use the Format Memory Card menu to delete all of the content that is currently on your

camera‟s memory card.

Keep in mind that formatting the memory card will permanently delete all of the content on

your camera’s memory card.

This option will delete all of the content at one time. If you would like to delete individual images,

use the delete menu in the camera‟s Playback mode.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Format Memory

Card menu.

3) Press the UP or DOWN direction control buttons to highlight the menu options.

4) To exit without formatting the card, select „Cancel‟ and press the SET button.

5) To proceed with the format, select “Yes” and press the SET button.

6) You will be asked to confirm the formatting of the memory card.

 Select “No” to exit without formatting.

 Select “Yes” and press the SET button to begin the format.

The memory card will be completely formatted.

Firmware (Factory Default Settings) Menu

Use this menu to view the Firmware version on your camera or to reset your camera settings to

the Factory Default Settings.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu.

3) The “Default Setting” is selected.

4) Press the SET button to reset the camera to the factory default settings.

5) You will be asked to confirm the resetting to the factory default settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

6) If you would like to proceed with the reset, select „Yes‟ and press the SET button to confirm.

The settings will be reset.

You will automatically exit the menu and return to the previous mode with the digital camera

settings set to the Factory Default Settings.

7) If you would like to exit the format, select „No‟ and press the SET button.

You will automatically exit the menu and return to the previous mode.

Note: After RESETTING to the default settings, it is recommended to select your system

Language, Date/Time and ViviLink for Photos and Videos. If you do not, the next time your

camera is powered on, you will be prompted to define those settings.

Photo Playback Mode

When you first turn on the camera, the camera will be in Photo Capture mode by default. Press

the MODE button twice to open the Playback Mode. The playback mode will allow you to review

and edit photos and videos that you‟ve already taken with you camera.

Viewing Photos on Your Camera

1) Select your Photo:

 Once in Playback mode, press LEFT or RIGHT direction buttons to scroll through the

images on your digital video recorder‟s memory card until you find the image you would

like to view.

 Each captured image (videos and photos) will display on the LCD screen.

 Photos will appear with a „JPG‟ icon on the top left of the LCD screen.

2) Zooming In/Out of your selected Photo:

 Press the T / Zoom In button to Zoom In and magnify the selected photo.

Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the photo.

 Press the W/Zoom Out button to Zoom Out of the selected photo.

Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the photo.

Download from Www.Somanuals.com. All Manuals Search And Download.

Thumbnail View

Easily navigate and select the image you wish to view by using the Thumbnail View.

The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction

buttons to scroll and select images from the thumbnails.

1) Press the W/Zoom Out button

2) All the images on your camera will appear in the Thumbnail View.

3) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the image you

wish to view.

4) Press the SET button to enlarge the selected image full size.

Photo Playback Mode Quick Function Buttons

Your digital camera has a four-directional pad that functions as Quick Function buttons.

Quick Function Button

Left

Action

Displays the PREVIOUS image

Views all the Photos as a Slide Show with 3, 5 or 10 second

intervals

(to exit the Slide Show, press any button)

Displays the NEXT image

Right

Down

ViviLink – Opens the ViviLink for Photos menu

Other

Opens Thumbnail View

 To Navigate in the Thumbnail View: press the UP / DOWN /

LEFT / RIGHT direction buttons

W/Zoom out

 To select a JPG in the Thumbnail View: press the SET

button

 Opens the menu options for Photo Playback Mode

 Saves your selected menu option

SET



Note: To navigate through the Menus, use the Left, Up, Right,

and Down directions control buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

Photo Playback Mode Menus

The following are the menus that appear in your camera‟s Photo Playback Mode:

Delete Menu

While in the Playback Mode, you can delete pictures from your camera using the Delete menu.

1) View the photo you would like to delete.

2) Press the SET button to open the menus for the current mode.

3) Press the LEFT or RIGHT direction control buttons to scroll and select the Delete menu.

4) Press the UP or DOWN direction control buttons to scroll through the menu options.

5) To delete the selected photo, select “Delete This Photo?” and press SET button.

You will be asked to confirm the deletion of the photo.

 If you would like to proceed with deleting the current image: select „Yes‟ and press the

SET button to confirm. The photo will be deleted and you will exit the menu and return to

the Playback mode.

 If you do not want to delete the current image, select „No‟ and press the SET button. The

photo will not be deleted and you will exit the menu and return to the Playback mode.

6) To delete all the images (videos and photos) you have saved on your SD Memory card,

select „Delete All Images‟ and press the SET button.

 If you would like to proceed with deleting all the videos and photos, select „Yes‟ and press

the SET button to confirm.

All of your images will be permanently deleted.

Download from Www.Somanuals.com. All Manuals Search And Download.

A blank „No Files Exist‟ screen will appear.

Press the MODE button to exit the „No Files Exist‟ screen and return to Photo Capture

mode.

Remember: All images will be deleted except images that are Protected/Locked. To

delete a locked image, first unlock the image, then select delete.

 If you do not want to delete all of your videos and photos, select „No‟ and press the SET

button. All images will remain on your SD card and you will exit the menu and return to

the Playback mode.

ViviLink Menu

The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos

to the social networks of your choice with the accompanying Vivitar Experience Image Manager

application.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the ViviLink menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) An icon will appear on the image with the selected ViviLink destination site when you return

to the Playback display.

7) Remember that the ViviLink feature is deactivated by default. A ViviLink destination will only

be assigned to a photo or video if you manually set it from this menu or from the ViviLink

menu in Capture mode (accessible with the ViviLink Quick-Function button in Capture

mode).

8) Changing the ViviLink destination site will also make the selected site the new default

ViviLink option. A new default can be selected at any time through this menu.

9) Press the LEFT or RIGHT button to select the next menu item.

10) Press the MODE button to exit the menu and return to your previous mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rotate Menu

Use this menu to rotate the pictures that you‟ve taken with your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Rotate menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

5) The selected picture will now appear rotated in the Playback mode.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

Crop Image Menu

You can crop any picture on your camera with the Crop feature.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Crop Image

menu.

3) Press the UP or DOWN to highlight the Crop option.

4) Press the SET button to open the Crop option.

5) The Crop window will open on the selected picture.

6) Use the directional buttons to move the Crop box to define the desired crop area.

7) Use the W/T Zoom buttons on the camera to enlarge or shrink the Crop box.

8) When you are ready to crop, press the Shutter button.

9) When you see the cropped picture appear, press the Shutter button again to save or press

the SET button to cancel and return to the previous menu.

10) If you selected to save, the cropped picture will now be saved as a new picture to your

memory card.

Protect/Lock Menu

Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion

or alteration being made to the files.

1) Press the SET button to open the menus for the current mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Protect/Lock

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

5) Press the LEFT or RIGHT button to select the next menu item.

6) Press the MODE button to exit the menu and return to your previous mode.

7) Any image that is locked will display a lock symbol on the LCD screen when viewing that

image in the playback mode. Photos that are not locked will not display the lock symbol.

8) Remember that you cannot delete or edit photos while they are locked.

Print Photos Menu

You can use the Print Photos menu to print the photos that are on your camera directly to a

Pictbridge compatible printer.

1) Scroll through your pictures and find the one you would like to print.

2) Press the SET button to open the menus for the current mode.

3) Press the LEFT or RIGHT direction control buttons to scroll and select the Print Photos

menu.

4) Press the UP or DOWN direction control buttons to scroll through the menu options.

5) Press the SET button when highlighting the “Print This Photo” option to print the selected

photo.

6) You will be asked to connect the camera to the Pictbridge printer.

7) Connect the USB cable provided in the package from the camera to the Pictbridge port of

the printer.

8) Once connected, follow the instructions on the printer to proceed with the printing process.

9) Select the “Cancel” option to exit the menu and return to the previous mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Slide Show Menu

You can view a Slide Show of all the pictures taken with your camera by pressing the UP Quick

Function button while in Playback mode.

The Slide Show menu allows you to set the interval length of time that each picture will display

during the slide show.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Slide Show

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) While in Playback mode, press the UP Quick Function button to initiate the slide show.

9) Press any button to exit the slide show and return to the previous mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Capture Mode

The Video Capture Mode allows you to capture videos with your digital camera. When the

camera is first powered ON, the camera will be in Photo Capture Mode. Press the MODE button

once to access the Video Capture Mode.

Taking a Video

1) While in Video Capture Mode use the LCD display on the back of the camera to direct the

camera at the scene you would like to capture.

Click the T/Zoom In and W/Zoom Out buttons to better set the camera display if

desired.

Note: The actual shape of these buttons may vary per camera model.

Press the Shutter button on the top of the camera to START the video capture.

4) You will see a red icon at the top of the LCD indicating that the record is in progress.

5) To STOP the video record, press the Shutter button again.

6) The video will automatically be saved to the camera‟s memory or SD card.

7) You can also capture your videos using the Flip Screen.

When you would like to quickly and easily include yourself in the video, simply flip the LCD

display out and hold the camera facing towards you. Make sure you can see yourself within

the scene on the LCD screen, look at the lens, then click the Shutter button to begin

recording.

It‟s as easy as twist and shoot!

Note: HD is available for Photo Capture mode only and not for Video Capture Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Capture Mode Quick Function Buttons

Your digital camera has a four-directional pad that functions as Quick Function buttons.

Quick Function Button

Left

Action

Scene Selection - Opens the Scene menu

Light Exposure - Opens the Light Exposure menu

Delete - Opens the Video Playback Delete menu to the „Delete

Right

This Video‟ option

Down

Other

ViviLink - Opens the ViviLink for Videos menu

STARTS/STOPS the video capture

Shutter

SET

 Opens the menu options for Video Capture Mode

 Saves your selected menu option

Note: To navigate through the Menus, use the Left, Up, Right, and Down

directions control buttons.

 Toggles between the Video Capture Mode, Photo Capture

Mode, and Playback Mode

MODE

 Exits the menu screen

Zooms In

Zooms Out

Hide/Show the LCD Icons

The display of the icons on the LCD screen can be hidden or visible as desired.

1) Hold the MODE button for 2 seconds to hide the display of the icons on the screen.

2) Press the MODE button again to redisplay the icons on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Capture Mode Menus

The following are the menus that appear in your camera‟s Video Capture Mode:

Download from Www.Somanuals.com. All Manuals Search And Download.

Scene Menu

The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to

your current environment.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Image Size Menu

The Image Size menu allows you to choose the desired size of the images taken by your camera.

Keep in mind that images with a larger size will also take up more of your camera‟s memory.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Size

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Image Quality Menu

The Image Quality menu allows you to select the desired quality level of the images taken by your

camera. Keep in mind that images with a higher image quality level will also take up more

memory on your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Image Quality

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Macro Menu

With the Macro feature you can capture images at close range (30 ~ 45 cm). To enable the Macro

mode, select

mode is ON.

„On‟. The flower icon

will appear on the LCD and indicates that the Macro

To return to the normal mode and disable the Macro mode, select „Off‟. The mountain icon

will appear on the LCD. When Macro mode is off, images can be captured from 1.5m - infinity.

Note:

 The Macro mode must be turned OFF when you want to use the following features of your

camera in the Photo Capture Mode: Flash, Face Detect and Smile Capture.