DVR 610 Digital Camcorder
with Camera
User Manual
© 2009-2011 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing this camera. Everything you need to take quality digital Videos and
Photos is included with your camera.
Vivitar makes capturing those special moments as easy as possible.
Please read this manual carefully first in order to get the most out of your digital camcorder.
Note: Your digital camcorder requires an SD Memory card (up to 16GB) for normal use.
SD Memory cards are not included and need to be purchased separately.
What‟s Included
1. Digital Camcorder
2. TV Cable
3. Vivitar Experience Image Manager
software Installation CD
4. Wrist Strap
5. Built-in USB Connector
Note: SD Memory Card and batteries not included.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
1. Power Button
2. Shutter Button
3. Left / Zoom Out/ Thumbnail View
4. Right / Zoom In
11. Battery Compartment
12. SD Memory Card Slot
13. USB Connector
14. USB Lever
5. M (Mode) Button
15. AV Out Port
6. SET Button
16. Wrist Strap Connector
17. Speaker
18. Microphone
7. UP / Previous Image / Scene Selection Button
8. Down / Next Image / Delete Last Image Button
9. LCD Flip Screen
19. Tripod Socket
10. Digital Lens
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Camera Setup
Installing the Batteries
Installing the Memory Card
Slide open the battery cover and install 2 AA
alkaline batteries with the correct polarity
(as illustrated inside the battery
SD Memory card (up to 16GB) needed for
normal use.
compartment) into the battery compartment
on the back of the camera.
Turning On the Camera
Using the Camera
4
Download from Www.Somanuals.com. All Manuals Search And Download.
When powering the digital camcorder ON for the first time, the camera takes you through the
INITIAL CAMERA SETUP.
Powering the Camera ON
1. Batteries
Make sure the batteries have been inserted properly into your digital camcorder.
Slide the battery cover on the back of the camera in a downward direction to open the
cover.
Insert 2 x AA (1.5v) batteries (not included) with the correct polarity, according to the
polarity illustrated inside the battery compartment.
Note: Alkaline batteries are recommended.
2. SD Memory Card
Make sure an SD card has been properly inserted into your camera. (SD card not
included.)
To properly insert the SD Card:
Push the SD card into the slot in the direction shown on the camera (see SD icon by the
SD card slot). Push the SD card until you hear a slight clicking sound. This indicates the
SD card has been inserted correctly.
Note:
After the camera is powered on, an SD icon will appear on the LCD display. If you do
not see the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the SD
card.
3. Power On
Press the POWER
button, on the top of the camera, to turn on the camera.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Camera Language
1. You will be prompted to select a language for the camera.
The Language selection menu will appear.
2. Select the language of your choice by pressing the UP or DOWN direction control
buttons.
3. Press the SET button to confirm the selection.
After selecting a language, the digital camcorder opens with the Video Capture mode ready for
you to capture your videos.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Camera Modes
Your camera has different modes for the various camera functions.
You can switch modes by pressing the MODE (M) button on your camera after the camera has
been powered ON.
Video Capture Mode
Use this mode to capture videos with your digital camcorder.
This is the default mode when the camera is powered ON.
To take a video, aim your camera as desired and press the Shutter button to start the
record. A blinking record indicator will appear on the LCD screen while record is in
progress. To stop the record, press the Shutter button again. The video will be
automatically saved to your camera‟s memory card.
To access the various menus for the Video Capture mode, press the SET button while in
the Video Capture mode.
Photo Capture Mode
Use this mode to capture pictures with your camera.
After turning on your camera, press the MODE (M) button once to open the Photo Capture
mode.
To take a picture, aim your camera as desired and press the Shutter button.
The picture will be automatically saved to your camera‟s memory card.
To access the various menus for the Photo Capture mode, press the SET button while in
the Photo Capture mode.
Playback Mode (Photos & Videos)
Use this mode to view and manage the photos and videos on your camera.
After turning on your camera, press the MODE (M) button twice to open the Playback mode
for photos and videos. You can scroll through the photos and videos that you‟ve previously
taken to view, edit or delete them as desired.
To access the various menus for the Playback mode for photos and videos, press the SET
button while in the Playback mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Technical Specifications
Product type
Digital Camcorder
Digital Video Resolution
Digital Photo Resolution
Image Sensor
LCD Display
640*480 pixels (30fps) / 320*240 pixels(30fps )
2M (1600x1200), 1.3M (1280x1024), VGA (640x480)
CMOS Sensor
1.8 Inch TFT
Internal Memory
External Memory
Zoom
Limited for test images (3 seconds for video or 2 photos)
SD card (up to 16GB) needs to be inserted to use the camera
2 x Digital Zoom
Frequency
50Hz / 60 Hz
Auto / Scenery / Portrait / Night Scenery / Night Portrait / High
Sensitivity / Sport / Beach / Party
Scene
Self Timer
2 seconds / 5 seconds / 10 seconds / Off
Anti-Shake
Yes
White Balance
Multi SnapShots
Exposure
Auto / Daylight / Cloudy / Fluorescent / Incandescent
Yes
-3.0EV ~ +3.0EV
ISO
Auto / 100 / 200 / 400
Slide Show
3 seconds / 5 seconds / 10 seconds
Language
English, French ,Spanish, Portuguese, German, Dutch, Italian
Speaker
Built-in
File Format
AVI and JPEG
TV out / Headset
Power Saving
Battery
PAL / NTSC / Headset
1 minute / 3 minutes / 5 minutes / Disable
2 AA batteries (1.5V)
USB 1.1
Transmission interface
Working temperature
-20~45C
Computer System
Requirements
Window XP SP3 / Vista SP1/ Windows 7
Mac OS X v10.5.x or higher
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer System Requirements – WINDOWS OS
To be able to download photos and videos to your PC, you will need the following minimum
configuration:
Microsoft® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7
Pentium® 4 processor (or above)ꢀ
512 MB of RAM, with 250 MB of free hard disk spaceꢀ
16-bit Color monitor, 1024 X 768 recommended screen resolutionꢀ
CD-ROM Drive
QuickTime® 6 or higherꢀ
Microsoft® Internet Explorer 7 or higher
Windows Media Player 10 or higherꢀ
DirectX 9 or higher
Internet connection required
Computer System Requirements – MAC OS
To be able to download photos and videos to your Macintosh, you will need the following
minimum configuration:
Intel processor running Mac OS X v10.5.x or later
256 MB RAM, 250 MB free hard disk space
Display: 1024 x 768 or higher-resolution monitor
QuickTime® 6 or higher
Internet connection required
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering ON/OFF Your Digital Camcorder
Make sure the batteries have been inserted properly into your digital camcorder.
Make sure an SD card has been inserted into your camera.
(SD card up to 16 MB - SD Card not included)
Powering the Digital camcorder ON
Press the Power
button to turn your camera ON.
The camera will be in Video Capture mode to start.
Powering the Digital camcorder OFF
While the camera is on, you can press the Power
button again at any point to turn your
camera OFF. You will see a “Goodbye” splash screen and then the camera will power off
completely.
Note: Your digital camcorder also has an Auto Power Off feature that automatically turns off
your camera after a specific period of time that your camera is left idle. The Auto Power Off
settings can be set from the Auto Power Off setting in the Video Capture Mode or Photo Capture
Mode menu.
Changing Camera Mode
Your camera has three main modes:
1. Video Capture Mode - Use this mode to capture videos with your digital camcorder
2. Photo Capture Mode - Use this mode to capture photos with your digital camcorder.
3. Playback Mode (for photos and videos) - Use this mode to view the videos and photos
you have already taken with your camera.
When the camera is first powered ON, the Video Capture Mode is active. The icons that appear
on the LCD screen are the best default settings so that you can begin to capture and enjoy clear
quality videos and photos.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the active camera mode, make sure the camera is powered ON and press the MODE
(M) button.
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display
Navigating the Menus
Each camera mode has a set of menus specific to that mode.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll between the various menus
for the current mode.
3. Press the UP or DOWN direction control buttons to highlight the desired menu option.
4. Press the SET button to select and save the highlighted menu option.
5. If the selection can be remembered by the camera, a selection icon
appears to the
right of the selected menu option. Changes made to these options remain until you
change them again at a later time.
6. Some menu options are single-use functions that are not remembered by the camera and
do not display the selection icon
when selected.
7. At any time you can press the MODE (M) button to exit the menus and return to the
previous screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Capture Mode
The Video Capture Mode allows you to capture videos with your digital camcorder. When the
camera is first powered ON, the camera will be in Video Capture Mode.
Taking a Video
1. While in Video Capture Mode use the LCD display to direct the camera at the scene you
would like to capture.
2. Click the Right - T/Zoom In and Left - W/Zoom Out buttons to better set the camera
display if desired.
3.
Press the Shutter button to START the video capture.
4. The elapsed time appears on the top right corner of the LCD screen.
A blinking red record indicator appears on the LCD screen while record is in progress.
5. To STOP the video record, press the Shutter button again.
6. The video will automatically be saved to the camera‟s memory or SD card.
7. You can also capture your videos using the Flip Screen.
When you would like to quickly and easily include yourself in the video, simply flip the
LCD display out and hold the camera facing towards you. Make sure you can see yourself
within the scene on the LCD screen, look at the lens, then click the Shutter button to
begin recording.
It‟s as easy as twist and shoot!
Note: The amount of recording time available for the resolution selected appears on the top
center of LCD screen. The lower the resolution setting the more recording time is available.
However, videos recorded at lower resolution are of less quality than videos recorded at the
higher resolution.
Remember, the amount of time that you can capture videos also depends on the size of the SD
memory card inserted as well as the video resolution selected.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Capture Mode Button Functionality
Your digital camcorder has a four-directional pad that functions as Quick Function buttons.
Quick Function Buttons Action
Zooms Out
Left
Up
Scene Selection – Opens the Scene menu
Zooms In
Right
Down
Delete – Allows you to delete the last video captured
Other
Shutter
Starts and stops the video recording
Opens the Menu options for Video Capture Mode
Saves your selected menu option
SET/OK
Note: To navigate through the Menus, use the Left, Up,
Right, and Down directions control buttons.
Toggles between the Video Capture Mode, Photo
Capture Mode, and Playback Mode
MODE (M)
Exits the Menu options screen
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Capture Mode Menus
The following are the settings that appear in your camera‟s Video Capture Mode:
Scene Menu
The Scene Menu allows you to choose scene settings that let your camera adapt properly to your
current environment.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Resolution Menu
The Image Resolution menu allows you to choose the desired size of the images taken by your
camera. The Image Resolution Options include:
VGA (640x480)
QVGA (320x240)
Keep in mind that images with a larger size will also take up more of your camera‟s memory.
Videos captured in VGA are of a better quality than QVGA videos and therefore take up more
memory.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Image
Resolution menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
White Balance Menu
The White Balance feature allows your camcorder to adjust the coloring of the captured images
depending on the type of light source in the current environment.
Properly adjusting the White Balance setting to match your current environment will allow the
camera to properly balance the colors in the images that are taken with your camera.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the White Balance
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Light Exposure Menu
The Light Exposure setting helps you control the amount of light that enters your camera‟s lens.
This setting should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the
negative - count) to reduce the amount of light allowed into the lens by your camera.
If the environment has less light (darker) than is needed, increase the exposure setting (by using
the positive + count) to increase the amount of light allowed into the lens by your camera.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Light Exposure
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Menu
You can select your camera‟s language setting by selecting the desired language from the
Language menu.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Language
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Auto Power Off Menu
You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The
designated time represents when your camera will automatically power off.
When the camera sits idle for the designated period of time, the camera will shut off completely
and will need to be turned on again with the power button before the next use.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Auto Power Off
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequency Menu
The options in the Frequency menu represent the frequency of the electrical current in
fluorescent lighting sources in your locale. If your camera is set to a frequency that does not
match your country‟s electric current, you may see flickering or waves on the images taken by
your camera.
50Hz – UK, Europe and Australia
60Hz – US, Canada and South America
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Format Memory Card Menu
You can use the Format Memory Card menu to delete all of the content that is currently on your
camera‟s memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camera‟s memory card.
This option can only delete all of the content at one time. If you would like to delete individual
images, use the delete menu in the camera‟s Playback mode.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Format
Memory Card menu.
3. Press the UP or DOWN direction control buttons to highlight the menu options.
4. To exit without formatting the card, select „Cancel‟ and press the SET button
18
Download from Www.Somanuals.com. All Manuals Search And Download.
5. To proceed with the format, select “Yes” and press the SET button.
The memory card will be then be automatically completely formatted.
Note: Formatting your memory card permanently deletes all images.
6. Press the MODE (M) button to exit the menu and return to your previous mode.
Firmware (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camera or to reset your camcorder settings
to the Factory Default Settings.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware
(Factory Default Setting) menu.
3. To reset the digital camcorder‟s settings to the Factory Default Settings, press the SET
button to select „Default Setting‟.
To proceed with the reset, select „Yes‟ and press the SET button to confirm.
The settings will be reset.
You will automatically exit the menu and return to the previous mode with the digital
camcorder‟s settings set to the Factory Default Settings.
To exit the resetting to the default settings, select „No‟ and press the SET button.
You will automatically exit the menu and return to the previous mode.
Note: After RESETTING to the default settings, it is recommended to select your system
language using the Video/Photo Capture Mode Menu. If you do not, the next time the digital
camcorder is powered on, you will be prompted to select a system language.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Playback Mode
The Playback mode allows you to review and edit photos and videos that you‟ve already taken
with you camera.
When you first turn on the camera, the camera will be in Video Capture mode by default.
Press the MODE (M) button twice to open the Playback Mode.
Playing Videos on Your Camera
1. Select your Video:
Once in Playback mode, press the UP or DOWN direction buttons to scroll through the
images on your digital camcorder‟s memory card until you find the video you would like
to view.
Each captured image (both videos and photos) is displayed on the LCD screen.
Videos appear with an „AVI‟ icon on the top left of the LCD screen.
2. Play your selected Video:
Press the Shutter button to START playing the video.
Press the Shutter button again to PAUSE the video and to continue playing and
pausing as needed.
While the Video is playing all the icons on the top section of the LCD disappear.
To fully STOP the video and restore the icons to the LCD, press the UP button.
Thumbnail View
Easily navigate and select the image you wish to view by using the Thumbnail View.
The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction
buttons to scroll and select images from the thumbnails.
1. Press the Left - W/Zoom Out button.
2. All the images on your camera will appear in the Thumbnail View.
3. Use the direction buttons to scroll and find the image you wish to view.
Videos appear with an „AVI‟ icon.
4. Press the SET button to select and enlarge the image full size.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Playback Mode Button Functionality
Your digital camcorder has a four-directional pad that functions as Quick Function buttons.
Quick Function Button Action
Opens Thumbnail view (when not playing a selected video).
Allows you to scroll through the images while in Thumbnail view.
Left
Displays the PREVIOUS image (when not playing a selected video).
Up
STOPS the video playback.
Allows you to scroll through the images while in Thumbnail view.
Allows you to scroll through the images while in Thumbnail view.
Right
Down
Displays the NEXT image (when not playing a selected video).
Allows you to scroll through the images while in Thumbnail view.
Other
Shutter
PLAYS the selected video file with sound.
PAUSES the selected playing video.
Opens the menu options for Video Playback Mode.
Saves your selected menu option.
In Thumbnail view, enlarges to full screen the selected thumbnail
image and exits Thumbnail view.
SET/OK
Note: To navigate through the Menus, use the Left, Up, Right, and
Down directions control buttons.
Toggles between the Video Capture Mode, Photo Capture Mode,
and Playback Mode.
MODE (M)
Exits the menu screen.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Playback Mode Menus
The following are the menus that appear in your camera‟s Video Playback Mode:
Delete Menu
While in the Playback mode, you can delete videos from your camera using the Delete menu.
1. View the image you would like to delete.
2. Press the SET button to open the menus for the current mode.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. To delete the selected video (one image), select “Delete This Video” and press the SET button.
You will be asked to confirm:
To delete the video and exit the menu, select „Yes‟ and press the SET button.
To exit the menu without deleting the video, select „No‟ and press the SET button.
5. To delete all the images (including all unlocked photos and videos) on your camera‟s
memory card, select “Delete All Images” and press the SET button.
You will be asked to confirm:
To delete all unlocked videos and photos, select „Yes‟ and press the SET button.
All of your images will be permanently deleted.
A blank „No File‟ screen will appear.
Press the MODE button to exit the „No File‟ screen and return to Video Capture mode.
To exit the menu without deleting the images, select „No‟ and press the SET button.
6. To exit the Delete menu without deleting any image(s), select „Cancel‟ and press the SET
button.
Remember: When selecting to “Delete All Images”, all your images are deleted except images
that are Protected/Locked. To delete a locked image, first unlock the image, then select delete.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Protect/Lock Menu
Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion
or alteration being made to the files.
1. View the image you would like to protect/lock.
2. Press the SET button to open the menus for the current mode.
3. Press the RIGHT or LEFT direction control buttons to scroll and select the Protect/Lock
menu.
4. Press the UP or DOWN direction control buttons to scroll through the menu options.
5. Press the SET button to select and save the desired option.
6. Press the MODE (M) button to exit the menu and return to your previous mode.
7. Any image that is locked will display a lock symbol on the LCD screen when viewing that
image in the playback mode. Photos that are not locked will not display the lock symbol.
Remember: Protected/Locked videos cannot be deleted.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Capture Mode
The Photo Capture mode allows you to capture pictures with your digital camcorder.
Taking a Picture
1. Turn on your digital camcorder.
2. Press the Mode (M) button once to select and enter the Photo Capture mode.
3. The
camera icon will appear on the top left corner of the LCD.
4. The amount of photos that can be captured with the available memory and as per the
selected resolution will appear on the top right corner of the LCD screen.
5. Compose your picture with the LCD screen.
6. Press the Right - T/Zoom In and Left - W/Zoom Out buttons to better set the camera
display if desired.
7. Press the Shutter button to capture and save your photo to the memory card.
8. You can also capture your photos using the Flip Screen, with the Self Portrait Photo
Capture.
When you would like to quickly and easily include yourself in the photo, simply flip the
LCD display out and hold out the camera facing towards you. Make sure you can see
yourself within the scene on the LCD screen and click the Shutter button to take the
picture.
It‟s as easy as twist and shoot!
Note: The lower the resolution setting the more photos can be taken. However lower resolution
photos are of less quality than photos taken at higher resolution.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Capture Mode Button Functionality
Your digital camcorder has a four-directional pad that functions as Quick Function buttons.
Quick Function Button
Action
Zooms Out
Left
Up
Scene Selection – Opens the Scene menu
Zooms In
Right
Down
Delete – Allows you to delete the last photo captured
Other
Captures the Picture
Shutter
Opens the menu options for Photo Capture Mode
Saves your selected menu option
Note: To navigate through the Menus, use the Left, Up, Right, and
SET/OK
Down directions control buttons.
Toggles between the Video Capture Mode, Photo Capture
Mode, and Playback Mode
MODE (M)
Exits the menu screen
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Capture Mode Menus
The following are the menus that appear in your digital camcorder‟s Photo Capture Mode:
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Menu
The Scene Menu allows you to choose scene settings that let your camera adapt properly to your
current environment.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Image Resolution Menu
The Image Resolution menu allows you to choose the desired size of the images taken by your
camera. Keep in mind that images with a higher resolution will also take up more of your
camera‟s memory.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Image
Resolution menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Quality Menu
The Image Quality menu allows you to select the desired quality level of the images taken by your
camera. Keep in mind that images with a higher image quality level will also take up more
memory on your camera.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Image Quality
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Self-Timer Menu
The Self-Timer menu allows you to set a delay between the time that the camera‟s shutter button
is pressed and the actual capture of the picture.
This is an optimal feature if you don‟t just want to take the picture but would also like to be in the
picture yourself. Just set the desired self-timer delay, press the SHUTTER button on your camera
and position yourself in front of the camera as desired.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Self-Timer
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Anti-Shake Menu
The Anti-Shake feature reduces image distortion that can be caused by movement of the camera
while capturing the image.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Anti-Shake
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT button to select the next menu item.
7. Press the MODE button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
White Balance Menu
The White Balance feature allows your camera to adjust the coloring of the captured images
depending on the type of light source in the current environment.
Properly adjusting the White Balance setting to match your current environment will allow the
camera to properly balance the colors in the images that are taken with your camera.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the White Balance
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Color Effect Menu
You can choose to add a color effect to the images taken with your camera.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Color Effect
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT button to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Multi Snapshots Menu
When enabled, the Multi Snapshots feature allows you to take five rapid snapshots in a row with
a single click of the Shutter button.
This feature can be effective when trying to capture a particular moment in a sporting event or
other scenes with quick movements.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Multi
Snapshots menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the SET button to select and save the desired option.
5. A selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Image Sharpness Menu
You can set the level of sharpness in the images taken with your camera. The sharpness level
dictates if the edges of objects in the image are more or less distinct.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Image
Sharpness menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Light Exposure Menu
The Light Exposure setting helps you control the amount of light that enters your camera‟s lens.
This setting should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the
negative - count) to reduce the amount of light allowed into the lens by your camera.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
If the environment has less light (darker) than is needed, increase the exposure setting (by using
the positive + count) to increase the amount of light allowed into the lens by your camera.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Light Exposure
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
ISO Menu
The ISO menu allows you to set the level of sensitivity that your camera has to light in the
surrounding environment. When the ISO level is increased, the image sensor in your camera will
be more sensitive to light and allow you to capture images in lower-light situations. The higher
sensitivity to light however, may reduce the quality of the images that are taken.
When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will
optimize the image quality in environments with bright lighting.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the ISO menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen
32
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Language Menu
You can select your camera‟s system language setting by selecting the desired language from
the Language menu.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Language
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Silent Mode Menu
You have the option of activating the camera‟s Silent mode to disable all of the sound effects
(except for during the Self-Timer countdown) that the camera emits when performing camera
functions.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Silent Mode
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT button to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Auto Power Off Menu
You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The
designated time represents when your camera will automatically power off.
When the camera sits idle for the designated period of time, the camera will shut off completely
and will need to be powered on again with the Power button before the next use.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Auto Power Off
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Frequency Menu
The options in the Frequency menu represent the frequency of the electrical current in
fluorescent lighting sources in your locale. If your camera is set to a frequency that does not
match your country‟s electric current, you may see waves on the images taken by your camera.
50Hz – UK, Europe and Australia
60Hz – US, Canada and South America
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
5. A
selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Format Memory Card Menu
You can use the Format Memory Card menu to delete all of the content that is currently on your
camera‟s memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camera‟s memory card.
This option can only delete all of the content at one time. If you would like to delete individual
images, use the delete menu in the camera‟s Playback mode.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Format
Memory Card menu.
3. Press the UP or DOWN direction control buttons to highlight the menu options.
4. To exit without formatting the card, select „Cancel‟ and press the SET button
5. To proceed with the format, select “Yes” and press the SET button.
The memory card will be then be automatically completely formatted.
Note: Formatting your memory card permanently deletes all images.
6. Press the MODE (M) button to exit the menu and return to your previous mode.
Firmware (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to
the Factory Default Settings.
1. Press the SET button to open the menus for the current mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware
(Factory Default Setting) menu.
3. To reset the digital camcorder‟s settings to the Factory Default Settings, press the SET
button to select „Default Setting‟.
To proceed with the reset, select „Yes‟ and press the SET button to confirm.
The settings will be reset.
You will automatically exit the menu and return to the previous mode with the digital
camcorder‟s settings set to the Factory Default Settings.
To exit the resetting to the default settings, select „No‟ and press the SET button.
You will automatically exit the menu and return to the previous mode.
Note: After RESETTING to the default settings, it is recommended to select your system
language using the Video/Photo Capture Mode Menu. If you do not, the next time the digital
camcorder is powered on, you will be prompted to select a system language.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Playback Mode
The Playback mode allows you to review and edit photos and videos that you‟ve already taken
with you camera.
When you first turn on the camera, the camera will be in Video Capture mode by default.
Press the MODE (M) button twice to open the Playback Mode.
Viewing Photos on Your Camera
1. Select your Photo:
Once in Playback mode, press the UP or DOWN direction buttons to scroll through the
images on your digital camcorder‟s memory card until you find the image you would
like to view.
Each captured image (both videos and photos) is displayed on the LCD screen.
Photos appear with a „JPG‟ icon on the top left of the LCD screen.
2. Zooming In/Out of your selected Photo:
Press the Right / Zoom In (T) button to Zoom In and magnify the selected photo.
Press the Left/Zoom Out (W) button to Zoom Out of the selected photo.
Thumbnail View
Easily navigate and select the image you wish to view by using the Thumbnail View.
The images on your camera are displayed in a 3 X 3 matrix where you can use the direction
buttons to scroll and select images from the thumbnails.
1. Press the LEFT – W/Zoom Out button.
2. All the images on your camera appear in the Thumbnail View.
3. Use the direction buttons to scroll and select the image you wish to view.
4. Press the SET button to enlarge the image full size.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Playback Mode Button Functionality
Your digital camcorder has a four-directional pad that functions as Quick Function buttons.
Quick Function
Action
Button
Zooms out of the selected photo after you have zoomed in.
Opens Thumbnail view.
Left
Allows you to scroll through the images while in Thumbnail view.
Displays the PREVIOUS image.
Up
Allows you to scroll through the images while in Thumbnail view.
Zooms in to the selected photo.
Right
Allows you to scroll through the images while in Thumbnail view.
Displays the NEXT image.
Down
Allows you to scroll through the images while in Thumbnail view.
STOPS the Slide Show.
Other
Opens the menu options for Photo Playback Mode.
Saves your selected menu option.
In Thumbnail view, enlarges to full screen the selected thumbnail
image and exits Thumbnail view.
SET/OK
Note: To navigate through the Menus, use the Left, Up, Right, and Down
directions control buttons.
Toggles between the Video Capture Mode, Photo Capture Mode,
and Playback Mode.
MODE (M)
Exits the menu screen.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Playback Mode Menus
The following are the menus that appear in your camera‟s Photo Playback Mode:
Delete Menu
While in the Playback mode, you can delete photos from your camera using the Delete menu.
1. View the image you would like to delete.
2. Press the SET button to open the menus for the current mode.
3. Press the UP or DOWN direction control buttons to scroll through the Delete menu
options.
4. To delete the selected photo (one image), select “Delete This Photo” and press the SET
button.
You will be asked to confirm:
To delete the video and exit the menu, select „Yes‟ and press the SET button.
To exit the menu without deleting the video, select „No‟ and press the SET button.
5. To delete all the images (including all unlocked photos and videos) on your camera‟s
memory card, select “Delete All Images” and press the SET button.
You will be asked to confirm:
To delete all unlocked videos and photos, select „Yes‟ and press the SET button.
All of your images are permanently deleted.
A blank „No File‟ screen appears.
Press the MODE button to exit the „No File‟ screen and return to Photo Capture
mode.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
To exit the menu without deleting the images, select „No‟ and press the SET button.
6. To exit the Delete menu without deleting any image(s), select „Cancel‟ and press the SET
button.
Remember: When selecting to “Delete All Images”, all your images are deleted except images
that are Protected/Locked. To delete a locked image, first unlock the image, then select delete.
Rotate Menu
Use this menu to rotate the pictures that you‟ve taken with your camera.
1. View the image you would like to rotate.
2. Press the SET button to open the menus for the current mode.
3. Press the LEFT or RIGHT direction control buttons to scroll and select the Rotate menu.
4. Press the UP or DOWN direction control buttons to scroll through the menu options.
5. Press the SET button to select and save the desired option.
6. The selected picture now appears rotated in the Playback mode.
Crop Image Menu
You can crop any picture on your camera with the Crop feature.
1. View the image you would like to Crop.
2. Press the SET button to open the menus for the current mode.
3. Press the LEFT or RIGHT direction control buttons to scroll and select the Crop Image
menu.
4. Press the UP or DOWN direction control buttons to highlight the „Crop‟ option.
5. Press the SET button to open the Crop option.
6. The Crop window opens on the selected picture.
7. Use the directional buttons to move the Crop box to define the desired crop area.
8. When you are ready to crop, press the SHUTTER button.
9. When you see the cropped picture appear, press the SHUTTER button again to save or
press the SET button to cancel and return to the previous menu.
10.If you selected to save, the cropped picture is saved as a new picture to your memory
card.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Protect/Lock Menu
Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion
or alteration being made to the files.
1. View the image you would like to protect/lock.
2. Press the SET button to open the menus for the current mode.
3. Press the RIGHT or LEFT direction control buttons to scroll and select the Protect/Lock
menu.
4. Press the UP or DOWN direction control buttons to scroll through the menu options.
5. Press the SET button to select and save the desired option.
6. Press the MODE (M) button to exit the menu and return to your previous mode.
7. Any image that is locked displays a lock symbol on the LCD screen when viewing that
image in the playback mode. Photos that are not locked do not display the lock symbol.
Remember: Protected/Locked videos cannot be deleted.
Slide Show Menu
The Slide Show menu allows you to play the slide show and set the interval length of time that
each picture is displayed during the slide show.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Slide Show
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. The slide show will begin playing.
6. Press the DOWN button to exit the slide show and return to the Playback mode.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a TV
Your camera has an AV port to use your larger TV screen in place of the camera‟s LCD screen.
On plugging the TV Cable (supplied) to the the camera‟s AV slot and to the TV, the LCD screen
turns blank. Use the camera as you would to capture and playback photos and videos. The
images appear on the TV instead of on the LCD screen.
Note: The only limitation of using the TV screen is that the camera is now not portable.
1. Connect the camera to a TV with the TV cable (supplied):
Connect the black jack into the camera‟s AV slot.
Connect the yellow jack into the TV – Video port.
Connect the white jack into the TV – Audio port.
2. Turn On the TV and the camera, and then set the TV to “AV” mode.
3. You will need to set the TV format on the camera to suit the TV format of your TV set.
4. Make sure the camera is set to the correct TV Output setting. On plugging in the TV out
cable a message appears on the LCD screen to select NTSC or PAL for the type of TV
you are using.
5. Select the option as per the format of the TV set you are using and press the SET button.
6. When the camera is set to Video or Photo capture mode, you can preview the subjects
you want to record on the TV screen and view the recording on the TV.
7. When the camera is set to Playback mode, you can review all the stored photos and
videos on the TV.
Connecting the Camera to a Headset
The camera has an AV port that is also used as a headset port. Plug your headset or speaker
system into the port to listen to the video sound track.
1. Connect the headset jack to the AV port of the camera.
2. Power on your camera.
3. The following options appear on the LCD: „NTSC‟, „PAL‟ or „Headset‟
4. Press the DOWN direction button to select the „Headset‟ option.
5. Press the SET button to confirm your selection and to hear the DVR sound on your headset.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Software
You must be connected to the internet to install and run the Vivitar Experience Image
Manager software.
1. Insert the installation CD into your CD-ROM drive. The installation screen should
automatically open.
2. On PC: The Vivitar Experience Image Manager Installer window appears. If the window
does not appear, open the application‟s CD/DVD drive and click on “Setup.exe” to launch
the installer.
3. On Macintosh: Click the icon that appears on the desktop to install the Vivitar Experience
Image Manager.
4. If you do not have internet access at the time of inserting the CD-ROM, connect to the
internet and then click the “Install Vivitar Experience Image Manager” button to begin the
installation.
Note: If you do not have internet access, you can still download media from the camera. Click the
“How to transfer photos and videos from my camera to my computer” button for instructions.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
5. If you have internet access, the “Choose your language” window opens, choose your
language and click “Next” to open the next window.
6. Select your camera model from the list and click “Next” to open the next window.
7. Click “Next” to confirm your camera model selection and to install the application.
8. Please wait while the application is being installed on your computer.
9. Please review the license terms.
On PC and Macintosh: Click the “I accept the terms of this license agreement” and then
click “Next” to continue.
10.On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to
where the program will be installed, and then click “Install”.
11.Please wait while the application continues the installation process on your computer.
12.On PC: Click the “Close” button when the installation is complete.
Click the “Launch Vivitar Experience Image Manager” to open the application.
13.On Macintosh: Click the “Quit” button when the installation is complete.
Click the “Launch Vivitar Experience Image Manager” to open the application.
14.If you close the application you can run the Vivitar Experience Image Manager from the
Programs (PC) or Applications (Mac) menu on your computer.
Connecting the Camera to the Computer
1. Make sure the SD Memory Card is inserted in the camera.
2. Slide the lever on the side of the camera to reveal the built-in USB connector.
Connect the camera‟s USB connector to the USB port of your computer.
3. The first time you connect the device to the computer you will have to wait a few seconds
until the computer recognizes the device.
4. As your camera is a mass storage device, “MSDC” appears on the LCD, indicating that
your camera is in Mass Storage Mode.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Photos and Videos from your Camera to Your Computer
An SD card needs to be inserted. Do not disconnect the camera‟s built-in USB connector from the
computer during transfer. Doing so will cancel the transfer of any files on their way to your computer.
1. Select the “Get Images” button from the Main menu.
2. The “Get Images from device” window opens.
3. You can select to download photos, videos or both.
4. Select your camera (removable disk) from the device window. If your camera is the only
USB device connected then it will be selected automatically.
5. Select a location on the computer where to place the new photo and video files.
6. Add the new photo and video files to albums if desired.
7. Select to remove the media files from the selected device (removable disk) after the import.
8. Click the “Get Media” button to transfer the photos and videos from your camera to your computer.
9. A media download progress bar appears on the bottom left showing the number of media
files downloading to your computer. A message appears when the download is complete.
10.The photo and video files that you selected are now downloaded to your computer to the
selected folder and albums ready for your use.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Get started!
Using the Vivitar Experience Image Manager, you can:
Upload and manage photos and videos to and from the most popular photo sharing and social
networking sites - Facebook, Flickr, Picasa, MySpace, Photobucket, Twitpic, Twitgoo and
YouTube
Seamlessly transfer photos and videos from one social network to another
Organize your images by creating offline and online albums
Edit images using automatic and manual tools
Use automatic “Geotagging” with built in Google Maps
For more details on how to use the Vivitar Experience Image Manager open the Help file or
click the “Take a Tour” button on the application‟s Home page.
Transfer media from my camera to my computer manually (Using Windows)
1. Slide the lever on the side of the camera to reveal the built-in USB connector.
Use the USB built-in connector on your camera to connect your camera to the USB port
on your computer.
2. “MSDC” appears on the LCD – indicating that your camera is in Mass Storage Mode.
3. A window appears with a list of options, select “Open folder to view files” and click OK.
4. Open the DCIM folder and the folder inside to view the media files.
5. Select the media and copy the files from this folder into your computer. Optionally, select
the files and choose Copy from the Edit menu. Then select a folder and choose Paste
from the Edit menu.
6. We recommend that you copy the images into the Pictures/My Pictures folder and the
videos into the Videos/My Videos folder.
7. Do not disconnect the camera from the computer during transfer. Doing so will cancel the
transfer of any files on their way to your computer.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer media from my camera to my computer manually (Using Macintosh)
1. Slide the lever on the side of the camera to reveal the built-in USB connector.
Use the USB built-in connector on your camera to connect your camera to the USB port
on your computer.
2. “MSDC” appears on the LCD – indicating that your camera is in Mass Storage Mode.
3. The camera‟s device icon appears on the desktop.
4. Click on the device icon and open the DCIM folder and the folder inside to view the media
files.
5. Select the files and drag them into your computer. Optionally, select the files and choose
Copy from the Finder‟s Edit menu. Then select a folder and choose Paste from the Edit
menu.
6. We recommend that you copy the images into the Pictures folder and the videos into the
Movies folder.
7. Do not disconnect the camera from the computer during transfer. Doing so will cancel the
transfer of any files on their way to your computer.
Camera Maintenance
The digital camcorder is a delicate device.
Please handle your camera with care to avoid damaging it.
Do not expose your camera to heat sources.
Do not use you camera in wet or moist conditions.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Sakar Warranty Card
This warranty covers for the original consumer purchaser only and is not transferable. Products
that fail to function properly UNDER NORMAL USAGE, due to defects in material or
workmanship will be repaired at no charge for parts or labor for a period of one year from the time
of purchase.
What Is Not Covered By Warranty:
Damages or malfunctions not resulting from defects in material or workmanship and damages or
malfunctions from other than normal use, including but limited to, repair by unauthorized parties,
tampering, modification or accident.
What To Do When Service Is Required:
When returning your defective product (postage pre-paid) for service, your package should
include:
1. Copy of original bill of sale
2. A detailed written description of the problem.
3. Your return address and telephone number (Daytime)
MAIL TO ADDRESS BELOW:
Sakar US
Sakar UK/Europe
Sakar Australia
Sakar International
Attention: Service Department Return faulty camera to the
Attention: Service Department 2D, Siskin Parkway East
Refund Counter at the
store where purchased
195 Carter Drive
Edison, NJ
08817
4020 Middlemarch Business
Park
Coventry, CV3 4PE
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
software and FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at
[email protected] and one of our technical support team members will answer your
questions. For phone support in the US please call 1-800-592-9541, in the UK call 0800 917 4831,
in Australia call 1800-006-614. If you would like to call from anywhere else, please visit
www.vivitar.com for your local toll free number.
Troubleshooting
Q: I have taken photos and selected the “Get Images” button. I get a message that the
images were successfully transferred but the photos do not appear on my computer.
What do I do?
First ensure that you have in fact taken photos. Press the Shutter button to take some sample
photos and then try downloading them again.
With test photos if the camera powers off before you upload them to the computer the photos are
not stored in the camera‟s memory. These photos should be uploaded quickly before the camera
powers off. If the photos are saved to the SD memory card then all the photos should appear.
Q: How do I make sure I don't lose important pictures?
This camera requires an SD card for normal use. If the camera powers off nothing will happen to
the images stored on the SD memory card. We recommend always downloading your photos to
your computer as soon as possible to prevent unintentional data loss.
Q: I deleted images using the Vivitar Experience Image Manager. The images were also
deleted from my computer. How do I recover images that I accidently deleted?
All images deleted using the Vivitar Experience Image Manager are sent to your computer‟s
Recycle or Trash Bin and can be retrieved from there.
DVR610EN-020311-TA
FWV0.11
49
Download from Www.Somanuals.com. All Manuals Search And Download.
|