®
Visioneer OneTouch
7400 USB Scanner
User's Guide
for Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
Visioneer OneTouch®
7400 USB Scanner
User’s Guide
F O R W I N D O W S
Download from Www.Somanuals.com. All Manuals Search And Download.
C O P Y R I G H T I N F O R M A T I O N
Copyright © 2007 Visioneer, Inc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of Nuance
Communications, Inc. ArcSoft Scrapbook Suite® is a registered brand name of ArcSoft, Inc. Adobe®, Adobe® Acrobat®, Acrobat® Reader®, and the
Adobe® Acrobat® PDF® logo are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries. The Adobe PDF logo
will appear in this product’s software, and full access to Adobe software features is only available if any Adobe product is installed on your computer.
This product is covered by one or more of the following patents: 6, 480, 304; 5,818,976; 5,499,108; 5,517,332.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. ZyINDEX is a registered trademark of
ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, ZyLAB International, Inc. All Rights Reserved. All other products mentioned
herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The software described is furnished under a
licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on
any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any
purpose other than the licensee's personal use and as specifically allowed in the licensing agreement, without the express written permission of Visioneer.
Part Number: 05-0744-000
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software
Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer
is solely responsible for complying with all such laws and regulations.
Visioneer's Limited Product Warranty
IF YOU FIND PHYSICAL DEFECTS IN THE MATERIALS OR THE WORKMANSHIP USED IN MAKING THE PRODUCT DESCRIBED IN
THIS DOCUMENT, VISIONEER WILL REPAIR, OR AT ITS OPTION, REPLACE THE PRODUCT AT NO CHARGE TO YOU, PROVIDED YOU
RETURN IT (POSTAGE PREPAID, WITH PROOF OF YOUR PURCHASE FROM THE ORIGINAL RESELLER) DURING THE 90-DAY PERIOD
AFTER THE DATE OF YOUR ORIGINAL PURCHASE OF THE PRODUCT. UPON RECEIPT DURING THE INITIAL 90-PERIOD BY
VISIONEER OF A VALID REGISTRATION OF THE PRODUCT, THIS LIMITED PRODUCT WARRANTY PERIOD IS EXTENDED TO THE
12-MONTH PERIOD AFTER THE DATE OF YOUR ORIGINAL PURCHASE. IF A VALID REGISTRATION IS NOT RECEIVED DURING THE
INITIAL 90-DAY PERIOD, THE 12-MONTH WARRANTY IS NO LONGER AVAILABLE AND YOUR PRODUCT WARRANTY WILL
TERMINATE AFTER THE 90-DAY INITIAL PERIOD EXPIRES.
THIS IS VISIONEER'S ONLY WARRANTY AND YOUR EXCLUSIVE REMEDY CONCERNING THE PRODUCT, ALL OTHER
REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT,
EXCEPT AS SET OUT ABOVE, THE PRODUCT IS SOLD “AS IS” AND YOU ARE ASSUMING THE ENTIRE RISK AS TO THE PRODUCT'S
SUITABILITY TO YOUR NEEDS, ITS QUALITY AND ITS PERFORMANCE.
IN NO EVENT WILL VISIONEER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in conflict with the
express requirements of applicable law.
RoHS and WEEE Compliance
This product is compliant with RoHS Regulations of the European Parliament and Council Directive on the Restrictions of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment (2002/95/EC), and with the Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC).
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with
FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer
could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Editing or Deleting Scan Configurations . . . . . . . . . . . . . . . . . . 59
Configure Before Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Scan and Burn to a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Scanning with Event Forwarding . . . . . . . . . . . . . . . . . . . . . . . . 69
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
TABLE OF CONTENTS
Uninstalling the PaperPort Software . . . . . . . . . . . . . . . . . . . . 110
Visioneer 7400 USB Scanner Specifications . . . . . . . . . . . . . . . . . . 111
Visioneer 7400 USB Scanner Part List . . . . . . . . . . . . . . . . . . . . . . 111
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Congratulations on purchasing your Visioneer OneTouch 7400 USB
scanner. With this scanner you can quickly scan paper items such as
letters, forms, photos, or magazine articles and place their electronic
images on your computer. With its innovative hinged lid, you can also
lay books flat on the scanner to scan pages.
WHAT’S IN THE BOX
Before starting the installation, check the contents of the box to make
sure that all parts are included. If any items are missing or damaged,
contact the dealer where you purchased the scanner.
Visioneer 7400 USB Scanner
Software CD
USB Cable
Technical Support Card
Quick Install Card
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
1
Download from Www.Somanuals.com. All Manuals Search And Download.
THE VISIONEER ONETOUCH 7400 USB SCANNER
3
Document cover—Protects the document from light and
contamination.
Glass—Items are placed face down aligned at the reference marks.
Reference marks—Marks on the border of the glass show where to
align various paper sizes.
OneTouch buttons—Scans to the appropriate application indicated by
the button. For example, pressing the Email button scans the
document, then opens your Email program with the image of the
scanned document as an attachment to a new message ready for you to
address and send.
Status light—Shows the scanner’s status. Steady green light: scanner is
ready to scan. Blinking green light: scanner is busy.
USB port—Connects the scanner to the computer. Your Visioneer
7400 scanner can connect to either a USB 1.1 or a USB 2.0 port.
Note: The scanner does not have an external power supply. It draws
its power directly from the computer through the USB cable. If you
use a USB Hub with your computer, the Hub must have its own
power supply so the scanner can draw power from it. The scanner also
does not have an on/off switch. It is ready to scan as soon as Windows
loads on your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
WHAT YOU NEED
IBM-compatible Pentium 4 PC, or AMD equivalent with:
■ A CD-ROM drive
■ An available Universal Serial Bus (USB) port; 1.1 or 2.0
■ Microsoft Windows operating system: 2000 (Service Pack 4), XP
(Service Pack 1 and 2), or Vista
■ Windows 2000 and XP: Minimum of 512 megabytes (MB) of
internal memory (RAM)
Windows Vista: Minimum of 1 gigabyte (GB) of internal memory
(RAM)
■ 350 MB of free hard disk space
A VGA or SVGA Monitor
The recommended settings for your monitor are:
■ High Color (16-bit) or True Color (24-bit or 32-bit)
■ Resolution set to at least 800 x 600 pixels
To set your monitor’s colors and resolution:
■ Open the Windows Control Panel
■ Double-click on Display then select the Settings tab
DOCUMENTATION
Your scanner is delivered with the following documentation:
■ Quick Install Guide—Abbreviated installation instructions.
■ Visioneer OneTouch 7400 USB Scanner User’s Guide—On the
Installation CD; contains detailed installation, scanning,
configuration, and maintenance information.
■ ScanSoft PaperPort User’s Guide—On the Installation CD;
contains detailed feature and configuration information for the
PaperPort software.
■ Online Help—For the scanner configuration, TWAIN, and WIA
interfaces.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
5
Installing
Installation is a quick, three-step process:
■ Install the software
■ Connect the scanner
■ Register your scanner
BEFORE YOU BEGIN
Please make sure of the following before you begin installation:
■ If your computer has AntiVirus or AntiSpyware software
running, you may see messages during installation asking you to
allow the installation to proceed. In each case you should allow
the installation to proceed. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your
scanner, but if you do, make sure to turn it back on again when
installation is finished.
■ If you already have a scanner connected to your computer it is
recommended that you remove its driver program prior to
installing your Visioneer OneTouch 7400 USB scanner. Please
refer to the user manual for your previous scanner for
instructions to remove the driver and software applicable to that
scanner.
■ The information in this User’s Guide may cover software not
provided with the scanner you purchased. Disregard any
information about software not applicable to your scanner.
Please visit our web site at www.visioneer.com for the latest
software updates for your Visioneer OneTouch 7400 USB
scanner.
■ If your computer is running Windows Vista, you may see the
Vista User Access Control screen asking you to confirm system
changes. Click the continue button to allow the installation to
proceed.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
STEP 1: INSTALL THE SOFTWARE
The Installation CD contains all the driver software and scanning
software to use your scanner.
To install the software:
1. Start Microsoft Windows and make sure no other applications are
running.
2. Insert the installation CD into your computer’s CD-ROM drive.
The Main Menu automatically opens.
Note: If the CD does not start, check the following:
■ Make sure the CD drive’s door is completely shut.
■ Make sure the CD was inserted in the drive in the proper
direction (label side up).
To launch the CD manually:
■ Open the Windows option for My Computer. You can do this
by double-clicking on the My Computer icon on your
desktop.
■ Double-click the icon for your CD-ROM drive.
■ The Installation menu for the CD should now open.
If the menu does not open:
■ From the list of files on the CD, double-click the file named
START32.EXE.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: INSTALL THE SOFTWARE
7
3. On the installation menu, select Install ScanSoft PaperPort and
Scanner Driver.
4. Make sure the boxes for Nuance PaperPort® and Scanner Driver
are checked.
If you also want to install the ArcSoft® Scrapbook Suite®
software now, select it too. You can also install it later.
5. Click Install Now.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
The PaperPort installation options opens.
1. The Select Language window opens. Click the drop-down menu
arrow and select the language you want to use. Click OK.
The first PaperPort Installation window opens.
2. On the PaperPort Welcome window, click Next.
Installing PaperPort will uninstall any existing version of PaperPort
and will install the newer version while retaining all of your
previous PaperPort files.
3. Read the PaperPort license agreement and select I accept the terms
in this agreement, then click on Next. If you choose not to accept
the license agreement, the installation will terminate and the
PaperPort software will not be installed.
4. On the Customer Information window, accept the current values or
enter new information, then click Next.
5. On the Setup Type window, keep the default Setup Type and click
Next.
6. Click Install to begin the installation.
Reminder: If your computer is running an AntiVirus or
AntiSpyware application, you may see messages asking you to allow
installation. Select the option to allow installation to proceed with
the install.
7. On the Product Registration window, do one of the following:
■ Select Register online, click OK, then follow the registration
instructions.
■ Select Print registration form, click OK, then follow the
instructions to complete and print the registration form.
■ Select Remind me in 7 days and click OK.
8. At the InstallShield Wizard Completed window, click Finish.
If a message window opens instructing you to restart your
computer, click Restart.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: INSTALL THE SOFTWARE
9
The Welcome to the OneTouch 4.0 Setup Wizard opens.
1. Click Next.
2. On the Visioneer License Agreement window, read the license
agreement. If you accept the terms, select I Agree.
If you choose not to accept the license agreement, the installation
will terminate and the scanner driver will not be installed.
3. Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
4. A window opens with image quality samples asking you to select an
image for your Color Space setting.
The Color Space setting sets the gamma value for the scanner so
scanned items look good on your monitor. Gamma controls the
brightness of the midtones of colors. That setting can be changed
later on as you’re scanning.
5. Select the option that looks best to you and click Next.
6. The driver installation will now begin.
Reminder: If your computer is running AntiVirus or AntiSpyware
software, you may see messages asking you to allow installation.
Select the option to allow installation to proceed.
Download from Www.Somanuals.com. All Manuals Search And Download.
7. STOP when you see the “Complete the installation by connecting
your hardware” window. Do NOT click on OK yet. Leave the
window open and proceed to “Step 2: Connect the Scanner” on
page 12.
Note: If you want to see more information about your scanner and a
quick explanation of how to use the OneTouch features, click the
More button on the window. When you’re finished, return to the
window to continue the installation process.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
STEP 2: CONNECT THE SCANNER
1. Remove any tape from the USB cable.
2. Using the steps on the screen as your guide, plug the square end of
the cable into the side of your scanner.
Plug into the Computer
Plug into the Scanner
3. Plug the flat, computer end of the USB cable into an available USB
port on the computer.
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into either connection.
If you use a USB hub, it must have its own power supply already
plugged into an electrical outlet.
Note: Your scanner does not have a power switch. Plugging it in turns
on the power.
Your computer recognizes that a scanner has been plugged into the
USB port. If your computer is running Windows XP or Windows
Vista, you will see a Found New Hardware message similar to the
following.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: REGISTER YOUR SCANNER
13
STEP 3: REGISTER YOUR SCANNER
Registering your scanner is important as it provides you with access to
our free telephone support service. Registration also gives you free access
to software updates for your scanner.
To register your scanner:
1. Right-click on the OneTouch icon in the Windows Notification
Area (at the bottom right corner of the screen).
2. Choose Check for Online Updates from the pop-up menu.
The OneTouch Icon.
3. Follow the instructions on the screen and register your scanner by
entering your scanner’s serial number and your email address.
Note: A valid email address is required.
4. The serial number is located on the underside of the scanner.
Serial Number
5. You will receive a message with your RegID when registration is
complete. Write down your RegID on a piece of paper and keep it
with your scanner so you will be able to find it easily.
Your RegID is important as you will need it when accessing free
telephone support, or checking for online updates.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
VIEW AND SAVE THE USER GUIDES
The User Guides for your scanner, and for the software you received
with it are on the Installation CD.
If you have already removed the installation CD from your CD-ROM
drive, insert the CD back into the drive to access the user guides.
1. On the Main Menu, click User Guides.
2. From the Visioneer User Guides window select the User Guide you
want to view and save to your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEW AND SAVE THE USER GUIDES
15
3. The Scanner Readme file is in HTML format and will open in any
standard browser. The Scanner Readme file has late-breaking
news about your scanner.
®
®
Note: The User Guides are in Adobe Acrobat PDF format. The
®
®
CD also includes a free copy of Acrobat Reader in case your
computer does not have it already installed.
If you need to, click Acrobat Reader to install it now. Follow the
instructions on the installation windows.
To view and save the User Guides:
1. Click the name of a User Guide you want to view and it will open
in Acrobat Reader. Use the Acrobat Reader Save command to save
that User Guide on your computer.
The PhotoImpression and Collage Creator applications are part
of the ArcSoft Scrapbook Suite.
2. Return to the Visioneer User Guides window and repeat the process
to open, view, and save all the other User Guides you want.
3. When you’re finished, click Main Menu to return to the Main
Menu window and click Exit.
4. Remove the CD and store it in a safe place.
That’s it! Installation is finished and your Visioneer scanner is ready to scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
Scanning
This section describes how to scan paper documents, book pages and
photographs:
■ OneTouch Scanner Buttons—Each scanner button is set up to scan
for a particular function, such as Email to attach a scanned item to a
“Scan from the OneTouch Scanner Buttons” on page 17.
■ OneTouch Button Panel—Scanning from the on-screen OneTouch
Button Panel is the same as pressing a scanner button, except you
click an icon that represents the scanner button. See “Scan from the
OneTouch Button Panel” on page 22.
scanning application. The TWAIN interface is available from the
PaperPort software and ArcSoft Scrapbook Suite applications, as well
as from other programs such as Microsoft Word. The TWAIN
interface has two options—the Basic Interface and the Advanced
■ Windows Image Acquisition (WIA) Interface—This option uses
the Microsoft Windows set of choices for scanning paper items only.
Scanning with WIA is available only if your computer is running
Windows XP or Windows Vista. See “Scanning from the Windows
Image Acquisition (WIA) Interface” on page 99.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM ONETOUCH
17
SCANNING FROM ONETOUCH
OneTouch is your main scanning interface for using the scanner. The
OneTouch Buttons on the scanner mirror the software OneTouch
Button Panel. Changing the button settings on the OneTouch Button
Panel makes the same changes to the buttons on the scanner.
SCAN FROM THE ONETOUCH SCANNER BUTTONS
Pressing a scanner button scans the item, and then sends the image to
the Destination Application associated with the button. Each button’s
scanning function are the selected settings shown in the OneTouch
Properties window.
Based on the recommended installation of PaperPort and the scanner
driver, your scanner is preconfigured to scan items for various basic
tasks, such as email or fax, then send the scanned image to an
appropriate, pre-selected Destination Application.
If PaperPort is not installed, then the options for sending to word
processing applications such as Microsoft Word will not be available.
The following table describes the preconfigured button settings. These
are the default settings on installation of the OneTouch software and
they can be reconfigured to reflect your own scanning needs:
Download from Www.Somanuals.com. All Manuals Search And Download.
18
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
Button
Destination
Preconfigured Settings
Scans in Color, 200dpi
Scan
PaperPort
Opens the image in PaperPort
Custom Storage
Scans in Black & White, 150dpi
Immediately saves the image file to a
folder location on your computer.
The image is not opened in an
application for viewing.
E-Mail Email Application Scans in Color, 300dpi
Attaches the scanned image to a new
email message.
OCR
Copy
Microsoft Word
or WordPad
Scans in Black & White, 200dpi
Converts the scanned text into
editable text.
Printer
Scans in Black & White, 200dpi
Prints a Black & White copy of your
scanned item.
Note: The default page size in each configuration is based on the
location selected in your Windows setup.
For example:
■ If the Windows location is set to “United States” the default page
size in each profile will be based on the United States standard
page sizes such as 8.5”x11”.
■ If the Windows location is “United Kingdom” the default page
size in each profile is based on the ISO 216 standard and the
majority of the profiles will default to A4.
Note: The email application will default to the email program
specified in the internet options of Internet Explorer.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM ONETOUCH
19
SCANNING PAPER DOCUMENTS OR PHOTOGRAPHS
1. Place an item face down on the glass. Align the bottom of the item
with the scanner’s reference marks. For custom sizes, align the edge
of the item with the left side of the scanner glass.
Reference marks
2. Close the document cover and press one of the OneTouch buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
3. A scan progress window opens shows the item as it is being
scanned.
4. After scanning has completed the image is sent to the selected
application for the OneTouch button.
In the example below, the image is scanned in the TIFF format and
the Destination Application is the PaperPort Desktop. The scanned
item appears a thumbnail on the PaperPort Desktop.
5. You can now work with the image in its Destination Application.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM ONETOUCH
21
SCANNING PAGES IN A BOOK
Your OneTouch 7400 USB scanner has an innovative hinged lid so you
can lay books flat on the scanner glass to scan their pages.
To scan book pages:
1. Open the document cover and place the book on the glass.
2. Align the edges of the pages with the reference marks.
3. Close the document cover.
Notice how the hinge at the back of the document cover lifts up so
cover lays flat on the book.
4. Now press one of the scanner buttons to scan the pages in the book.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
SCAN FROM THE ONETOUCH BUTTON PANEL
Scanning from the button panel on your computer’s screen works just
like pressing a button on the scanner. The scanner scans the item, then
sends the image to the Destination Application indicated by the button’s
icon. This method of scanning is especially helpful if the scanner is not
located close to your computer.
To scan from the button panel on the screen:
1. Place an item face down on the glass. Align the bottom of the item
with the scanner’s reference marks.
OneTouch Icon.
2. Close the document cover, and click the OneTouch icon on the
right-hand side of the Windows System Tray (at the bottom right
corner of the screen).
The button panel opens on the screen. The five buttons on the
panel correspond to the same five buttons on the scanner.
3. Click a button on the panel.
The scanner starts scanning the item. When the scan is complete, the
scanned image opens in the Destination Application indicated by the
button’s icon just as if you had scanned using a scanner button. For
example, if you click the Scan button, the scanned image opens in the
PaperPort program.
Note: To scan from the Button Panel, the OneTouch Properties
window must be closed. Click the window’s close box, or click the
Cancel or OK button on the window. See the next section, “Scan
from the OneTouch Button Panel.”
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM ONETOUCH
23
ONETOUCH BUTTON PANEL FEATURES
The OneTouch Button Panel is your on-screen set of controls for the
scanner. In addition, the panel shows information about the scanner
and its settings.
Click the green arrows at the top of the panel to cycle back and forth
through three views of the panel.
1. From the main Button Panel:
■ Click the arrow pointing to the left to see the Hardware view
which shows the scanners currently attached to your computer.
■ Click the arrow that points to the right to see the Detail view
which shows the scan setting details of the currently selected
button.
Click these green
Shows the 5 scanning
options, and mirrors
the buttons on the
scanner.
arrows to cycle
through the panel’s
views.
The Button Panel
The Detail View.
The Hardware View.
This view shows the connected scanner(s).
You can click either the green arrow or the
scanner icon to get back to the previous
view.
This view shows the scan settings for the
button currently selected on the One-
Touch Properties window. Right-click the
icon to see the window.
2. On the OneTouch Button Panel:
■ Left-click a Destination Application icon to start the scanning. If
the OneTouch Properties window is open, you must close it first.
■ Right-click a Destination Application icon to see its scan settings.
3. To close the OneTouch Button Panel, click the close button at its
top right corner.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
ABOUT THE ONETOUCH BUTTON PANEL’S NAMES AND ICONS
The button names on the panel are the same as button names on the
scanner. The icons indicate the Destination Applications so you can see,
at a glance, where the image will be sent when scanning is finished.
The Scan button—Scans a page in black and white and sends the
image to the PaperPort software that you received with your scanner.
From there you can easily convert the image to many different formats,
such as PDF or DOC.
The Custom button— Scans the item as a color photo and displays it
in an image processing application. If your computer is running
Windows XP or Windows Vista, and has a CD burner attached, the
Custom button will be pre-configured to burn a CD.
The Email button—Scans a page in color then sends it to your email
application. The email application opens and the image is automatically
attached to a new message ready for you to address and send.
The OCR button—Scans a page in black & white then sends the image
to a word processing application such as Microsoft Word. OneTouch
automatically converts the item’s text to black and white word
processing text, and displays it in a word processing application so that
the text can be edited.
The Copy button—Scans a page in color then sends the image to your
printer/copier. The printer/copier starts and prints a copy of the page.
This is a quick way to print a copy of the original page.
appropriate software, or in some cases the appropriate hardware, for the
initial factory settings. In that case, you can re-set the button’s
Destination Application to a software application that you know is on
your computer.
See “Selecting Settings for a Button” on page 29 to change the settings
of a button.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
25
CONFIGURING THE ONETOUCH BUTTON OPTIONS
When you first connect your scanner to a computer, the scanner’s
software configures each OneTouch button with appropriate settings
consisting of: a Destination Application, a Scan Configuration, and a
File Format. To change the settings, you reconfigure the buttons by
selecting new options from the OneTouch Properties window.
To open the OneTouch Properties window:
1. Left-Click on the OneTouch icon in the Windows Notification
area.
2. When the button panel opens above the OneTouch icon, right-
click the button you want to configure. The OneTouch Properties
window opens for that button.
You can also open the OneTouch Properties by pressing, holding
down, and then releasing a button on the scanner.
For example, right-
click on the Scan
button and the
OneTouch
Properties opens for
that button.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
ABOUT THE ONETOUCH PROPERTIES
The OneTouch Properties window is where you can select new settings
for the buttons. The tabs across the top of the window correspond to
the buttons on the scanner.
The following example of the OneTouch window shows the settings for
Scan button. The button is set to scan with the scan configuration
named Scan US Letter Document and then open PaperPort to display
the scanned image. The format option is set to scan in the TIFF image
format.
The Options tab
shows options
available for each
button.
Click the tab that
corresponds tothe
scanner button
you want to con-
figure.
Select the file
format that you
want the final
image saved as.
Select the mode
configuration that
you want to use
while scanning.
This is where you
decide if you want
to scan in Black &
White, Grayscale
or Color.
Select the application that you want the scanned image to
open in after scanning is complete. You use the destination
application to view and work with your scanned images.
Note: Some of the options on the OneTouch Properties Window
(and other OneTouch windows and dialog boxes) are “grayed out”
and are not available. Grayed out options are not appropriate for your
Visioneer 7400 scanner. If you use the OneTouch application with
other Visioneer scanners, grayed out options become active, if
appropriate.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
27
THE ONETOUCH PROPERTIES OPTIONS
This is a brief overview of the various sections in the OneTouch
Properties window.
Select Destination—The list of applications that OneTouch can send a
scanned image to so that this application opens immediately after
scanning is complete with the scanned image ready for editing.
Select the application you
want OneTouch to send
the scanned image to.
Select Configuration—The list of available configurations to use while
scanning. The configuration’s basic settings include: scanning mode
(Black & White, Greyscale, or Color), resolution (dpi), page size,
brightness (Br), and contrast (Cr).
Click a configuration icon
to view the details of its
settings. Click again to
close the details.
The icons next to each configuration indicates the scanning mode:
Color
Configure Before Scan
Black & White
Grayscale
Download from Www.Somanuals.com. All Manuals Search And Download.
28
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
You can edit the configuration by selecting the configuration then
Configuration Properties options.
Note: If you select the configuration Configure Before Scan, pressing
a OneTouch button opens the TWAIN or WIA interface for you to
change the scan settings, such as color or page size, prior to scanning.
See “Configure Before Scan” on page 61.
Select Format—these are the file formats that OneTouch can save the
scanned item to when scanning is complete. This example shows the
formats that apply when scanning to Microsoft Outlook or to a storage
location.
Button tabs—there is one tab for each of the OneTouch Buttons on the
scanner that also corresponds to the buttons available in the OneTouch
Button Panel.
Options tab—clicking on this tab shows a window for you to select
options applicable to the button tab you are currently viewing.
The 5 button tabs for the 5 buttons on the scanner.
Options Tab.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
29
SELECTING SETTINGS FOR A BUTTON
For each of the five OneTouch buttons, you can select a new
Destination Application, Scan Configuration, and File Format
To select new settings for the Scanner Button:
1. Open the OneTouch Properties window.
2. Click the tab of the button you want to change.
Each button has its own settings. So, as you click the tabs, the
button.
3. From the Select Destination list, select the application where you
want documents sent when scanning is finished.
See “OneTouch Options Tab” on page 47 to display a full list of the
Destination Applications that you can use with the scanner.
4. From the Select Configuration list, select a scan configuration.
To scan in color, select one of the configurations indicated by the
small color icon, such as the Scan Color Document configuration.
5. Select a File Format option.
The available options apply to the Destination Application you
select. For example, if you select Microsoft Word as the Destination
Application, the available formats are for text, such as .txt and .rtf.
But if you select Microsoft Paint as the Destination Application,
then the available formats are for graphics, such as .bmp and .jpg.
6. Click OK to accept the changes and close the window, or click
Apply to accept the changes and keep the window open so you can
work with other features.
With the OneTouch Properties window open, you cannot scan by
clicking a button on the Button Panel. However, you can scan at
any time by pressing a button on the scanner.
Now when you press or click a scanner button, the document is
scanned using the new settings for that button.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
DESTINATION APPLICATION PROPERTIES
The different types of Destination Applications have various properties
that you can select.
Document Management Application—Nuance PaperPort is a
document management software. The OneTouch properties for this
type of destination application allows you to choose which folder on
your computer the scanned image is saved.
Word Processing Applications—word processing applications include
Microsoft Word, Microsoft Excel®, and Corel® WordPerfect®. The
OneTouch properties for this type of destination application allows you
to add word processing applications and set other options applicable
only to text file formats.
Image Editing Applications—image editing applications include
Microsoft Paint, ArcSoft® PhotoImpression, and Adobe® PhotoShop®.
The OneTouch properties for this type of destination application allows
you to add other image editing applications and set other options
applicable only to image file formats.
Email Applications—email applications include Microsoft Outlook
and Microsoft Outlook Express. The OneTouch properties for this type
of destination allows you to choose where the files for attachment to a
blank email are stored on your computer.
Transfer to Storage—The Transfer to Storage option is simply the
option to scan to a folder on the computer without opening any other
application. The OneTouch properties for this type of destination
application allows you to change the folder location where the files are
being stored.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
31
CHANGING DESTINATION APPLICATION PROPERTIES
1. Open the OneTouch Properties window.
2. On the OneTouch Properties window, click a Destination
Application.
3. Click the Properties button.
ClickaDestination
Application.
Click the Properties
button.
A OneTouch 4.0 Link Properties dialog box opens for the type of
Destination Application you selected, and the available options are
for that application.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
PAPERPORT PROPERTIES
These properties apply to PaperPort, and are for designating the folder
to receive your scanned items.
1. Select the PaperPort folder where you want the file of the scanned
image to be located.
2. Click OK.
3. Click OK or Apply on the OneTouch Properties window.
When PaperPort opens after you finish scanning, the thumbnails of
your scanned documents are on the PaperPort Desktop in that
folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
33
TEXT DOCUMENTS PROPERTIES
These properties apply to Microsoft Word, Microsoft Excel®, and the
other applications indicated by their icons in the list. The properties
apply to the OCR settings for the applications.
Click in the OCR settings boxes for the options you want.
These options will apply to all the applications in the group listed
above these options.
■ Always send a file, even when no text was found—The
scanned file is sent to the OCR reader even if the image does not
appear to contain text. This could occur if you scanned a
photograph with a scanner button set for text applications.
■ Show message if text recognition failed—A message will
appear on the screen if the OCR reader does not detect text in
the image.
To add another word processing application to the list, click the Add
Application button. The Add Text Based Link dialog box opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
TEXT DOCUMENT PROPERTIES - ADD APPLICATION
1. Click Browse to find the application you want to add to the list.
When you select the application using the Browse button, steps 1
and 2 on the dialog box are automatically filled in, and the
application icon appears in step 3.
2. Select the icon in Step 3 of the dialog box. That is the icon that will
appear in the OneTouch Destination List.
3. In step 4 of the dialog box, select the file formats that the
application will accept.
Refer to the documentation that you received with the application
to see which text formats the application accepts.
The options you select at step 4 determine the page format icons in
the OneTouch Properties window for that group of applications.
4. Click the Add button.
5. Click OK or Apply on the Link Properties window.
6. Click Refresh on the OneTouch Properties window.
7. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
35
IMAGE DOCUMENTS PROPERTIES
These properties apply to image processing applications such as ArcSoft
PhotoImpression and Microsoft Paint.
Click in the Color document handling settings boxes for the options
you want.
The options will apply to all the applications in the group.
■ Convert Bitmaps using Screen resolution—Use this option to
ensure that an image will fit on the computer’s screen. When a
computer screen is set to a lower resolution, bitmap images with
a higher resolution may be too big to fit on the screen.
Converting the bitmap image to match the screen resolution
ensures that the image fits on the screen.
■ Convert Bitmaps to JPEG—JPEG files can be compressed to
produce smaller files sizes and, therefore, shorter transmission
times when you email the file or upload it to the internet. Use
this option to provide that compression capability to image files.
To add another image editing application to the list, click the Add
Application button. The Add Image Based Link dialog box opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
IMAGE DOCUMENT PROPERTIES - ADD APPLICATION
1. Click Browse to find the application you want to add to the list.
When you select the application using the Browse button, steps 1
and 2 on the dialog box are automatically filled in, and the
application icon appears in step 3.
2. Select the icon in Step 3 of the dialog box. That is the icon that will
appear in the OneTouch Destination List.
3. In step 4 of the dialog box, select the file formats that the
application will accept.
Refer to the documentation that you received with the application
to see which text formats the application accepts.
The options you select at step 4 determine the page format icons in
the OneTouch Properties window for that group of applications.
4. Click the Add button.
5. Click OK or Apply on the Link Properties window.
6. Click Refresh on the OneTouch Properties window.
Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
37
STORAGE PROPERTIES
These properties apply to the Destination Application named Transfer
to Storage. If a CD burner is attached to your computer, you can also
use this dialog box to start the Burn to CD process. See the section
“Scan and Burn to a CD” on page 66.
Windows Vista with a CD burner installed on your computer.
You can also set up multiple configurations to store scanned items in
separate locations. See “The Storage Options Tab (Archive)” on page 57
and “Scanning to Multiple Folders” on page 74.
1. Click the Storage Layout options you want.
■ All documents are in the root—The scanned documents are
saved in the root of the folder specified in the Storage Location.
■ Documents are put into folders by month, week, or type—
Folders are created based on your selection (month, week, or
type) and the scanned documents are saved in those folders. New
folders are created for each month and week so you can keep
track of when you scanned the documents.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
2. Click the Browse button to specify the location to store the
scanned documents, or type a location directly into the box.
If you are scanning to a shared network drive, it must be a mapped
drive. For more information about mapped drives, see your
network administrator.
If you have a CD burner attached to your Windows XP or
Windows Vista computer, the option Show message when ready
to burn 5" CD (700MB), should also be selected so you will see a
message when it’s time to click the Burn to CD button.
3. Click OK.
4. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
39
EMAIL PROPERTIES
These properties apply to email applications so you can specify the
folder for documents that you will attach to an email message.
Microsoft Outlook® will accept direct attachment of documents to a
blank email message as soon as scanning is finished, but other email
applications do not. If you’re using one of those applications, such as
America Online® (AOL), you need to know which folder contains the
scanned documents so you can manually attach them to your email
messages.
1. Click the Browse button for Folder for storing attachments and
choose a folder for your email attachments.
2. If you are using AOL on your computer, and the folder name for
AOL is incorrect, click the Browse button and find the correct
AOL folder.
For scanned images to be auto-attached to a blank email message,
you must have the specific folder location AOL uses to find the
attachments. Please contact AOL for more information about the
folder location in which AOL stores attachments.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
3. If you need to change your email client, or any other internet
options, click the Internet Options button.
The Windows Internet Options Control Panel opens. Click the
Programs tab and choose a new email client from the Email list.
These are the standard Windows Internet options. Please see your
Windows documentation for more information about Internet
options. If you are using AOL, please see the AOL user manual for
making changes to the Internet options applicable to AOL.
4. Select the options for color document handling.
■ Convert Bitmaps using Screen resolution—Use this option to
ensure that an image will fit on the computer’s screen. When a
computer screen is set to a lower resolution, bitmap images with
a higher resolution may be too big to fit on the screen.
Converting the bitmap image to match the screen resolution
ensures that the image fits on the screen.
■ Convert Bitmaps to JPEG—JPEG files can be compressed to
produce smaller files sizes and, therefore, shorter transmission
times when you email the file or upload it to the internet. Use
this option to provide that compression capability to image files.
5. Click OK.
6. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
41
SELECTING FILE FORMAT OPTIONS
The option that you select determines the file format of the scanned
document. Appropriate format options and file types are available for
the type of Destination Application selected for the button.
The available options are for images and text.
Image Formats
Text Formats; TEXT
is only one of several
text formats available.
IMAGE FORMATS
Select an image file format for photos, artwork or other documents that
you want to save as images. BMP and TIFF are standard image file
formats generally used if you want to do additional image processing,
such as photo touch-up or color correction. Both of those file formats
tend to be larger than the JPG format.
Because JPG image files can be reduced in size, the JPG format is often
used for images on web pages, or if file size might be a problem when
electronically sending the files. JPG files are reduced in size by lowering
their image quality, and you can select the degree of quality for your
scanned images from the JPG page format icon.
The PDF format is often used to create images of text pages. You may
want to select PDF as the page format when scanning text pages that do
not require OCR processing or other processing. The PDF format is
also used to put multi-page documents on web sites as pdf-readable
files. As with the JPG option, the PDF format can be reduced in size or
quality.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
To select a JPEG or PDF file size:
1. Select JPG or PDF as the format.
2. Right-click on the JPG or PDF icon.
A menu opens.
3. Choose the file size/image quality option for your scanned images.
Minimize Size—Smallest file size, lowest image quality.
Normal—Medium file size, some loss of image quality.
Maximum Quality—Largest file size, no loss of image quality.
Your selection pertains only to the button currently selected on the
OneTouch Properties window. Other buttons that have JPG or
PDF selected as the Format are not affected, so you can set the JPG
or PDF file size/image quality independently for each button.
4. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
43
TEXT FORMATS
The Text Formats are for text file types. The names of the formats
indicate their file types.
Selecting the text format option also selects OCR processing as an
automatic step for scanning. Therefore, when you scan a document
with the text format selected, the text portions of the document are
automatically converted to editable text. See “Scanning with Optical
Character Recognition (OCR)” on page 45
Select a text format for documents with text or numbers, such as a
business letter, report, or spreadsheet. The text format icon has several
file formats available, depending on the Destination Application you
select.
The specific file format is the file name extension on the text format
icon.
The specific text format; this example is for Rich Text
Format (RTF) used with Microsoft Word, WordPad,
and other word processing applications.
As you select Destination Applications that are text applications, the
text format icon changes to match the file type of the application. In
some cases, the Destination Application supports several file types, and
you can right-click on the icon to choose the particular file type and
OCR options for that application.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
To select a file type for the text format:
1. Select the Destination Application.
2. Right-click on the text format icon.
A menu opens. The following figure shows an example for the
TEXT format with Microsoft Outlook selected as the Destination
Application. The menu options depend on the type of Destination
Application you select.
3. Choose the file type you want for the text format.
Your selection of a file type pertains only to the button currently
selected on the OneTouch Properties window. Other buttons that
have a text option selected as the Format are not affected, so you
can set the text file type independently for each button.
Simple Text—The .txt file format. Text with no formatting; used
by the standard Microsoft Notepad application.
Rich Text Format—The .rtf file format. Text that retains
formatting when converted. Available with Microsoft WordPad and
Word.
Excel Spreadsheet—The .xls file format used by Microsoft Excel.
HTML Document—The .htm file format used to create web
pages.
4. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
45
SCANNING WITH OPTICAL CHARACTER RECOGNITION (OCR)
Optical Character Recognition (OCR) converts text and numbers on a
scanned page into editable text and numbers. You can then work with
the text and numbers to edit, spell check, change font or type size, sort,
calculate, and so forth.
To scan with OCR:
1. Select a Destination Application that has one of the Text formats
(TEXT, RTF, XLS, or HTML).
2. Scan the document.
Your scanned pages open in the Destination Application with their
text ready for editing and other text processing.
Note: OCR scanning is also for spreadsheets so you can work in
Microsoft Excel (or other spreadsheet applications) with the figures
and text from the original spreadsheets.
To select OCR settings:
1. Select the Destination Application.
2. Right-click on a text format icon to see the drop-down menu.
3. Choose OCR options.
A dialog box of OCR options opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
4. Select the option you want for the OCR conversion of your
documents.
Auto orient page—Select this option to check the page orientation
and automatically rotate an improperly oriented page image so the
text is recognizable by the OCR process.
Single column output—Select this option to produce a single
column of text in the Destination Application, even if the original
image had multiple columns of text.
5. Click OK.
Note that the OCR options apply to all the Destination
Applications for which OCR applies. If you change them for one
Destination Application, those changes apply to the others as well.
Note: If scanning to a text editing application, such as Microsoft Word
or Microsoft Excel, then the text formats available are applicable only
to that application (TXT & RTF for Microsoft Word, XLS for
Microsoft Excel, and HTML for Internet Explorer.) However, if you
have selected the destination Transfer to Storage, then all TEXT
formats will be available for this destination as OneTouch is writing
the file directly to your folder location and does not open any other
application.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
47
ONETOUCH OPTIONS TAB
From the OneTouch Options tab you can choose what type of
applications appear in each button’s tab destination list. Show or hide
the scanning progress window when scanning from OneTouch. You can
also choose to save permanent soft copies of your scanned images to
your computer.
To select options:
1. Open the OneTouch Properties window and click the Options tab.
Options tab.
Click the arrow to
see the menu to
choose the button.
2. Click the menu arrow and choose the button for new options.
3. Individual button Destination options:
Show All Destinations—This option selects all the Destination
Application categories. The list of Destination Applications
available for the selected button will include all the applications on
your computer that fall into these categories. The list also includes
printers and other devices connected to your computer so, for
example, you can scan an item and have it printed immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
Select Destinations—Select this option to individually choose the
types of applications to include in the list of Destination
Applications. Check the boxes for the type of application to
include.
Document Management includes PaperPort and other
applications for processing and keeping track of your scanned
documents.
Image Editors include ArcSoft PhotoImpression, Microsoft
Paint and other drawing and graphics applications.
Text Editors include Microsoft Word and WordPad, Microsoft
Excel, and other word processing and spreadsheet applications.
scanned documents to text that you can edit.
PDF applications are for documents scanned to PDF format.
about attaching scanned documents to your email messages.
Storage and CD-R/W is for either storing scanned documents
in a folder, or sending them to a CD burner to create a CD
containing the scanned documents. See “Transferring Scanned
Documents to Storage” on page 73 and “Scan and Burn to a
CD” on page 66 for details.
to your printer or fax software for faxing.
Sti Event Forwarding is for using another application’s
interface for scanning. The OneTouch Event Forwarding dialog
box opens so you can select which application to use to
continue scanning. See “Scanning with Event Forwarding” on
page 69 for details.
Show Progress Window—Select this option to display the progress
window of the document(s) during scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
49
Create copies of scanned documents—Sometimes the image of a
scanned document is only saved as a temporary file until its
Destination Application is finished using it. In those cases you may
or may not want an additional, permanent copy saved on your hard
drive.
For example, if you scan a picture to an email application, the
scanned image is saved as a temporary file, then attached to the
email, and the email is sent. But because you already have the
original picture, you may not want to also save a permanent file of
that image as well. The same situation may occur when you scan
directly to a printer or scan to a fax application. You already have
the paper version (and in the case of a printer, you would have two
paper copies—the original and the scanned printed version) so
there’s no need for an electronic file too. However, by selecting this
Create copies of scanned documents option, you can choose to
save permanent copies of those types of images on your hard drive.
The copies will be saved in the folder specified in the Folder Copy
Options section.
You can selectively choose which buttons you have turned this
feature on. After you turn this feature on it is used no matter where
you set the scanning destination. By selecting the Fax and Print
box and clicking the Create copies of scanned documents option,
every scanned document you fax or print from the scanner is also
saved as a permanent file on your hard drive.
This option is not available if Document Management or Storage
and CD-R/W are selected because, by default, file copies for those
types of Destination Applications are already automatically saved.
For that reason, this option is disabled if the Destination
Application is PaperPort because it is Document Management
software.
Likewise, the option is also not available if the Destination
Application is set to Transfer to Storage because it uses Storage and
CD-R/W software.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
Folder Copy Options—This section of the dialog box sets the
location for copies of your scanned documents and how you want
to group them.
To specify another location for copies, click the Browse button and
find the folder you want to use for the copies. Select the grouping
option for the documents. The Group by button option groups the
documents under the name of the scanner button. Group by type
arranges the scanned documents by the type of file, such as .doc or
.jpg. If you also want to group them by date you can choose the
week and month options.
The following example shows the folders if a new location is named
My Scanned Documents, and the selections are Group items by
type and Group items by month.
4. Click OK to save the options for the selected button.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
51
CREATING A NEW SCAN CONFIGURATION
The scan configurations are where you select the scanning resolution,
brightness, mode (color, black&white, or grayscale), and a number of
other settings.
Configurations.
Lock Icon.
Click New to create a
new Configuration.
Note the lock icon on the preset configurations. Although you can
unlock and edit the preset configurations, we recommend that you leave
them locked, and only add new configurations. That way, you will
always have the original factory-set configurations available.
To create a new configuration:
1. Open the OneTouch Properties window and click the tab of the
button that you want to have a new configuration.
2. Scroll through the applications in the Select Destination list and
click the type of application for which you want to create a new
scan configuration.
When you create a new scan configuration, it will appear for the
buttons that are set for the same types of Destination Applications.
For example, if you create a new configuration for a button that is
set to show image editor applications, that new configuration also
Download from Www.Somanuals.com. All Manuals Search And Download.
52
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
appears for any other buttons set for image editors, but not for
buttons set for text editing applications. Thus, you can create
specific sets of scan configurations for specific functions and they
appear only when appropriate.
3. Click the New button.
If you want to start from the settings of another configuration,
select the configuration, then click the Copy button.
If the Scan Settings tab is not selected, click it.
THE SCAN SETTINGS TAB
1. On the Scan Configuration Properties dialog box, type a name.
Type a new name for
the configuration.
If the configuration
is locked, click the
lock to unlock it.
The icon becomes a
key.
Select the scan mode
and drag the slider to set
the resolution.
Drag the sliders to set
the Brightness and
Contrast.
Note: If a destination application has additional features available,
there will be additional tabs in this Scan Configuration Properties
window applicable to that destination. The features in these additional
tabs are covered later on in this section.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
53
2. Select scan settings for the new scan configuration.
■ Mode—Select a scanning mode:
Black&White to scan in black and white. For example, letters
and memos are usually scanned in black and white. This scan
mode produces the smallest file size.
GrayScale to scan items such as documents containing
drawings or black and white photographs. The scanning
produces an image of up to 256 shades of gray.
Color to scan color photographs and other color items. Color
scans have the largest file size.
■ Resolution—Drag the slider to the right or left to adjust the
dots per inch (dpi) of the resolution. The maximum resolution is
1200 dpi; the minimum is 50 dpi. The higher the dpi setting,
the sharper and clearer the scanned image. However, higher dpi
settings take longer to scan and produce larger files for the
scanned images.
■ Brightness and Contrast—Sometimes an item is scanned with
the brightness and contrast set too light or too dark. For
example, a note written with a light pencil may need to be
scanned darker to improve legibility.
Brightness refers to the lightness or darkness of the image.
Contrast is the range between the darkest and lightest portions of
the image. The greater the contrast, the more the difference
between the lighter and darker shades in the image.
Drag the sliders to the right or left to adjust the brightness and
contrast of the scanned image. The Contrast setting does not
apply to the Black&White mode.
3. If you want to lock the configuration, click the Key icon to change
it from a Key to a Lock.
4. Click the Page Settings tab to select page settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
THE PAGE SETTINGS TAB
Click to toggle
between inches
and millimeters.
■ Size—Click Standard, click the menu arrow and choose a page
size from the list, or click Custom and enter the horizontal and
vertical page dimensions in the boxes. The maximum size is 8.5"
by 11.69". The units of measurement can be inches or
millimeters. Click the name of the units, inches or millimeters,
to toggle between them.
■ Improvements and Settings—Only the options that apply to
the selected Destination Application are available.
Reduce Moire Patterns—Moire patterns are wavy, rippled lines
that sometimes appear on the scanned images of photographs or
illustrations, particularly newspaper and magazine illustrations.
Selecting Reduce Moire Patterns will limit or eliminate moire
patterns in the scanned image. This option is only available for
the Grayscale or Color Mode at 300 dpi or less.
Invert Image—Only available for Black&White Mode, this
option reverses the black and whites of an image.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
55
Original Image
Inverted Image
5. Click the Advanced Settings tab.
THE ADVANCED SETTINGS TAB
The options of the Advanced Settings tab are for the Color or
Grayscale scanning mode.
1. Drag the sliders to the left and right to change the color settings. As
you do, the image changes to show the effects of the new settings.
Saturation is the strength or purity of a color, hue is the color your
eyes see as reflected from the image, and gamma controls the
brightness of the midtones of the color.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
2. Click OK to save the new configuration.
It will now appear in the list of Scan Configurations list on the
OneTouch Properties window for the appropriate Destination
applications.
THE DEVICE SETTINGS TAB
A Device Settings tab appears on the Scan Configurations dialog box
when your selected Destination Application sends the scanned image to
a printer, fax application, or other device. You use the options on the
Device Settings tab to select settings for the device.
1. Click on the Device Settings tab.
Fit to page, reduce image if necessary—If the scanned image is
too big to be printed or faxed on a single page, the image will
automatically be reduced to fit the page.
Actual size, crop image if necessary—If the scanned image is to
big to be printed or faxed on a single page, the image will
automatically be cropped around its edges to fit on the page.
Center image on page—The image will be printed in the center of
the page instead of at the top right corner.
Maintain aspect ratio—The aspect ratio is the length-to-width
relationship of the image’s dimensions. Select this option so the
image’s relative proportions remain constant.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
57
AutoRotate image for best fit—If the image is a Landscape format
and the device is printing in the Portrait mode, or vice versa, rotate
the image to fit on the page.
Collate copies—If you’re printing more than one page, collate the
copies. Enter the number of copies in the Copies box.
Advanced—click to see additional settings for the device. The
dialog that opens is specific to the device. For example, if the device
is your printer, the dialog box is your printer’s setup settings.
2. Click OK or Apply.
THE STORAGE OPTIONS TAB (ARCHIVE)
A Storage Options tab is on the Scan Configurations dialog box when
the selected Destination Application is set as Transfer to Storage, such as
for the Archive scanner button. You use the options on this tab to select
where you want to save your scanned items for storage when scanning
with that particular Scan Configuration.
override the storage options that apply to the Storage Properties. This
means that you can create separate Scan Configurations to store
scanned items at various locations in addition to the main location set
by the Storage Properties. See “Storage Properties” on page 37 and
“Transferring Scanned Documents to Storage” on page 73 for more
details.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
1. Click on the Storage Options tab.
2. Click the Storage Layout options you want.
All documents are in the root—The scanned documents are saved
in the root of the folder specified in the Storage Location.
Documents are put into folders by month, week, or type—
Folders are created based on your selection (month, week, or type)
and the scanned documents are saved in those folders. New folders
are created for each month and week so you can keep track of when
you scanned the documents. Type refers to the file type selected as
the Page Format on the OneTouch Properties window.
By default, the location of the archived documents is at
C:\Documents and Settings\<your user name>\My
Documents\My OneTouch Archive then in a folder based on your
selection for the Storage Layout. For example, if the file type is
TIFF, and you select Documents are put into folders by type, the
default location of scanned archive documents is at C:\Documents
and Settings\<your user name>\My Documents\My OneTouch
Archive\TIFF Documents.
3. If you want to store your archive documents in some other location,
click the Browse button to specify the new location.
4. Click OK or Apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
59
EDITING OR DELETING SCAN CONFIGURATIONS
Your scanner comes with a number of configurations pre-set at the
factory. To ensure that your scanner will always have a set of correct scan
configurations, do not delete the preset configurations. We also
recommend that you keep those configurations locked so they are not
inadvertently deleted. That way, you will always have the factory-
settings available. If you do edit or delete them, and want to get the
factory pre-sets back again, you will need to uninstall then reinstall your
scanner.
To edit or delete a scan configuration:
1. Open the OneTouch Properties window.
2. Select the scan configuration you want to edit or delete.
The selection must be an unlocked configuration.
The following example shows a new scan configuration that was
created named “Scan for Light Text.”
Select the scan
configuration to edit
or delete. It must be
unlocked, as indicated
by not having a lock
displayed here.
3. To delete the configuration, click the Delete button.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
4. To edit the configuration, click the Edit button.
The Scan Configuration Properties dialog box opens for that
configuration.
You can make changes to a configuration, but for the changes to be
saved, the configuration must first be unlocked. Click the Lock
icon to unlock the configuration. Clicking it toggles between
locking and unlocking the configuration. The key icon indicates
the configuration is unlocked.
Click the Lock/Key
icon to toggle between
locked and unlocked.
5. Edit the settings and click OK.
6. Click OK to close the dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
61
CONFIGURE BEFORE SCAN
You can set up a button so that, when you press that button or click it
on the Button Panel, a different scanning interface opens before the
scanning starts.You can then use the interface to select new settings or
scanning options. To set up a button for this capability, you select
Configure Before Scan as its Scan Setting.
Choosing Configure Before Scan simply opens either the TWAIN or
then use the interface to change the Resolution, Scan Mode, and other
type and to the same Destination Application already selected in the
OneTouch Properties window for that button. Please see “Scanning
from the TWAIN Interface” on page 81 for detailed instructions on
scanning with the TWAIN interface or “Scanning from the Windows
Image Acquisition (WIA) Interface” on page 99 for detailed instructions
on scanning with the WIA interface.
The option Configure Before Scan can be used when you want to scan
multiple pages and have them appear in one file. The OneTouch file
formats TIFF and PDF support multiple page files.
TO SET CONFIGURE BEFORE SCAN:
1. Open the OneTouch Properties window.
2. Using the arrows, choose the button that you want to set to
configure before scanning.
3. Select the scan configuration Configure Before Scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
Select a button.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and choose
the interface to use
for scanning.
use for configuring before scanning.
TWAIN—The Basic Interface or Advanced Interface opens for you
to configure the scanning. See “Scanning From the Basic TWAIN
Interface” on page 85 or “Scanning From the Advanced TWAIN
WIA—The Windows Image Acquisition (WIA) interface opens for
you to configure the scanning. The WIA option is only available if
your computer is running Microsoft Windows XP or Windows
Vista. See “Scanning from the Windows Image Acquisition (WIA)
Interface” on page 99.
5. Click OK or Apply on the OneTouch Properties window.
TO SCAN USING CONFIGURE BEFORE SCAN
1. Put the document or photo on the flatbed glass.
2. Click on the button you set to use the Configure Before Scan
option.
In the example above, the Scan button has been setup to use the
Configure Before Scan option.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
63
3. The Basic TWAIN interface will open.
4. Choose your scan settings, such as the Picture Type of Color,
Grayscale or Black & White, Resolution in DPI, and Page Size.
5. Click on the Scan button in the TWAIN interface.
6. Your documents will be scanned and sent to the Destination
Application specified in the OneTouch 4.0 Properties.
In the example shown on the previous page, the Destination
Application is PaperPort.
TO SCAN MULTIPLE PAGES
You can use Configure Before Scan to create multi-page documents
when scanning from the flatbed glass. First, please make sure your
OneTouch Properties are set to scan as a TIFF, PDF or a text file type.
The image file types BMP and JPG do not support multi-page
documents.
1. Click on the Scan button in the OneTouch Button panel or press
the Scan button on the scanner.
2. When the TWAIN interface opens, select the appropriate scan
settings for your document.
3. Click on the Scan button in the TWAIN interface.
4. After the scanning progress bar closes, you can place a new page on
the flatbed glass then click on Scan again.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
5. Click on the Done button when you are finished scanning all the
pages in your document.
6. All of the pages you scanned will be sent to the Destination
Application set in the OneTouch Properties window.
CANCELING A CONFIGURE BEFORE SCAN
To cancel a scan after scanning has begun:
1. Click on the Cancel button in the scanning progress window.
2. The following window will open asking you if you want to cancel
the entire job.
■ Yes—scanning stops and all pages scanned in this batch, up to
this point, will be deleted. The TWAIN interface will close and
you can restart your scan from the beginning.
Choose Yes if the TWAIN scan settings are incorrect for your
current scanning batch.
For instance, if the Picture Type is Black & White but your
documents are in color, choose yes to delete any scanned pages,
then select the correct Picture Type and restart the scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
65
■ No—scanning stops, but all pages scanned in this batch, up to
this point, are not deleted. You can place a new page on the
flatbed glass, adjust the TWAIN settings for the new page, then
click on the Scan button in the TWAIN interface to continue
scanning. At the end of the scanning batch, all pages from the
first portion of the scan and second will be sent to the
Destination Application.
Choose this option if, for instance, you have been scanning a
black & white document but you want to insert a color page
into the document and did not change the Picture Type prior to
clicking on the scan button. Instead of having to re-scan the
entire stack, you can stop the current scan, change the Picture
Type from Black & White to Color, then restart the scanning
without losing the pages already scanned.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
SCAN AND BURN TO A CD
If you have a CD burner attached to your Windows XP or Windows
Vista computer, you can scan directly from your scanner onto a CD.
To scan and burn to a CD:
1. Open the OneTouch Properties window.
2. Click the Custom button tab, or other button you want to set as
the Burn to CD destination.
3. Select Burn to CD as the Destination Application.
You do not need to have a CD in the burner to select the
destination.
Note: If you have a CD burner installed on your computer and the
Burn to CD Destination Application is not in the list, click the
Options tab, click the Storage and CD-R/W option, click Apply,
then click the tab of the Copy button.
If you do not have a CD burner installed on your computer then the
Burn to CD option will not be available.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
67
4. Choose a Page Format and a Scan Configuration.
See the notes on page 68 for more information about the scan
configurations when the Destination Application is Burn to CD.
5. Click OK.
The OneTouch Properties window closes.
6. Now start scanning using the button you selected to use to scan and
burn to CD.
When scanning is finished, a bubble message on the screen tells you
that files are waiting to be burned to the CD.
7. On the OneTouch window, make sure that the Burn to CD
Destination Application is still selected and click the Properties
button.
The OneTouch 4.0 Link Properties window opens.
8. Make sure a CD is in the CD burner.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
9. Click the Burn to CD button.
The CD burner begins and your scanned documents are written to
the CD.
Note: Until you click Burn to CD these files are stored in your
computer at C:\Documents and Settings\<your user name>\Local
Settings\Application Data\Microsoft\CD Burning. This is where
Windows XP stores all files waiting to be burned to a CD by the
automatic CD writing wizard. If other files are also waiting in this
location, they will get written with the OneTouch files on the CD.
Note: When scanning items to burn to a CD, you should always use
one of the factory-set default configurations, or a custom
configuration specifically set up for CD burning. The default
configurations are already set up to send the scanned images to the
proper storage location where the Windows XP CD writing wizard
can find the files to burn to the CD. Likewise, when you create a
custom configuration for CD burning, the OneTouch software will
automatically make sure the storage location is correct.
the new configuration. You won’t need to select a storage location
because it will be correctly preset for you by the OneTouch software.
Note however, that if you have created other custom configurations
with different storage locations (for example, see “Scanning to
Multiple Folders” on page 74), do not use them for the Burn to CD
Destination Application. Otherwise, the Windows XP CD writing
wizard will not be able to find the images to burn onto the CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
69
SCANNING WITH EVENT FORWARDING
You use event forwarding to specify another application to use for
scanning before you start. A typical example is if you want to use
another application’s interface to select scanning options before you start
scanning. When you press the scanner button designated for event
forwarding, the scanner waits to start scanning until you select the
application to use. After you select the application, its interface opens
and you use it to continue scanning.
To scan with event forwarding:
1. Open the OneTouch Properties window.
2. Click the tab of the button you want to use for event forwarding.
3. Select Still Image Client as the Destination Application.
Note that you cannot choose a page format for this option because
the actual Destination Application is not selected until after you
press the scanner button.
4. Choose a Scan Configuration.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
5. Click OK.
The OneTouch Properties window closes.
6. Start scanning using the button you selected for event forwarding.
A dialog box opens for you to select the application to use for
scanning.
7. Select the application in the box and click OK.
Now the application you selected opens and you can continue the
scanning from that application’s interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
71
CREATING AN HTML WEB PAGE FROM YOUR SCANNED DOCUMENTS
You can convert scanned pages to HTML format for posting directly to
your web site. Those pages are then viewable by visitors to your web site
without the need for any internet plug-ins or other special processing.
This is, essentially, from your scanner to a web-ready format in one
automatic step.
To scan and create an HTML web page:
1. Open the OneTouch Properties window.
2. Click the tab of the button you want to use to scan pages for
HTML conversion. In the sample below it is the Scan button.
3. Select Microsoft Explorer as the Destination Application.
4. Choose HTML as the Format.
Choose HTML.
5. Choose a Scan Configuration that has the settings for the image on
the HTML page.
For example, if you want the image to be in color on the HTML
page, choose a color configuration.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
6. Click OK.
The OneTouch Properties window closes.
7. Put the document on the scanner glass and close the lid.
8. Press the scanner button you’ve set up for HTML scanning.
When scanning is finished, the document is first converted to
editable text using the OCR process, then is converted into an
HTML format. Microsoft Internet Explorer then opens showing
your converted page.
Note: Depending on the complexity of the document, its conversion
to the HTML format may take a few moments.
9. Choose Save As from the Internet Explorer File menu, give the
page a name, and save it in the location you use for your web page
files.
You may also want to write down the address shown in the Address
bar to make sure you’ll know where to find your new HTML page
later on.
10. You can now use Microsoft Internet Explorer or other application
to post the document to your web page as you would any other
HTML page.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
73
TRANSFERRING SCANNED DOCUMENTS TO STORAGE
documents without having to manually save or process them in any
other way. If you choose a text format for the file format, the documents
are also automatically converted by the OCR process into editable text
and numbers before they are stored. See the section, “Scanning with
Optical Character Recognition (OCR)” on page 45, to set up the
Archive button for the OCR process.
documents to storage. If you changed the settings for the Archive
button, or want to set up another scanner button for archiving, please
see the steps in the section “Selecting Settings for a Button” on page 29,
and also see the sections “Storage Properties” on page 37 and “The
Storage Options Tab (Archive)” on page 57.
To transfer documents to storage:
1. Press the button you’ve set up to transfer to storage.
2. Scanning begins and your scanned pages are stored in the location
that you specified on the OneTouch 4.0 Link Properties window.
Your scanned documents will be
stored at the location you
specified on the OneTouch 4.0
Link Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
Note: The Storage Location shown in the example above is the
default place where your scanned documents are stored if you haven’t
created any new scanning configurations or selected a new storage
location. If you create a new scan configuration that has its own
storage location and you use that configuration to scan, your scanned
documents will be stored at the new location instead of the default.
SCANNING TO MULTIPLE FOLDERS
When archiving documents with the Archive button with the Transfer
to Storage as the Destination Application, you can scan the documents
to multiple folders. For example, one folder might be for “Business
Receipts,” a second folder might be for “Personal Receipts,” and a third
folder might be for “Annual Receipts.”
To scan to multiple folders, you create multiple configurations, each
with a different storage location for the scanned documents. Scan one
set of documents using the scan configuration with the appropriate
storage location for that set. Then switch to another scan configuration
and scan the next set of documents to store them in their folder.
Setting up multiple folders for transfer to storage:
1. Using Microsoft Windows, create the folders you want to use for
storing scanned items. Note that you can also create the folders later
while creating the new scan configurations.
2. Open the OneTouch Properties window.
3. Click the Archive tab.
You can click another tab to use its button for archiving instead.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
75
4. Select Transfer to Storage as the Destination Application.
Select Transfer to Storage.
Click the New button.
5. Click the New button.
The Scan Configuration Properties dialog box opens.
6. Click the Scan Settings, Page Settings, and Advanced Settings
tabs, and select the settings you want.
To help you remember which folder it is, give the new
configuration a name that indicates the folder name, such as
“Storage for Business Receipts.”
7. Click the Storage Options tab. This is where you set the different
folder locations for the new configurations.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
8. Click the Browse button.
9. Select the folder you created for storing the scanned documents.
If you haven’t created the folder yet, you can click the Make New
Folder button and type the name for the new folder.
10. Click OK. The selected folder will now be set as the Storage
Location, such as “Business Receipts.”
11. Click OK. The new configuration is now listed as a Transfer to
Storage configuration.
12. Repeat the process to create additional new configurations, such as
one named “Storage for Personal Receipts.”
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
77
13. Make sure to designate separate folders as the Storage Locations for
the new configurations.
You will now have multiple configurations set up for the Transfer to
Storage destination, and each configuration stores scanned
documents in separate folders.
Thenewconfigurations
apply to the Transfer to
Storage Destination
Application.
Scan to multiple storage folders:
1. Open the OneTouch Properties window.
2. Click the Archive tab (or other tab if you set up another button for
archiving).
3. Make sure Transfer to Storage is selected as the Destination
Application.
4. Select one of the configurations you created for storage.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
5. Click OK. The OneTouch Properties window closes.
The OneTouch panel will show the name of the configuration.
6. Scan the documents you want to store.
The documents are scanned to the folder specified for the
configuration.
7. When scanning is finished, open the OneTouch Properties window
again and select the other configuration you created for storage.
8. Click OK.
The OneTouch panel will show the name of the other
configuration.
9. Now scan the next set of documents.
When scanning is finished, the two sets of documents are stored in the
two separate folders.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTON OPTIONS
79
When selecting the storage location for scanned documents, you can
select a local folder, or a folder on a server or mapped drive. You select a
mapped drive using the Browse button.
1. See “Scanning to Multiple Folders” on page 74 or “Transferring
Scanned Documents to Storage” on page 73 for the steps to select
the Transfer to Storage options.
2. On either the OneTouch 4.0 Link Properties window, or from the
Scan Configuration Properties window, click the Browse button.
The Browse For Folder window opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
3. Select a storage location on the mapped drive or server for the
scanned documents.
Servers and mapped drives are represented by an icon that indicates
its network connection.
Select a mapped drive or
server as indicated by the
icon.
4. Click OK.
Now when you scan using Transfer to Storage as the Destination
Application, the documents are stored on the server or mapped
drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
81
SCANNING FROM THE TWAIN INTERFACE
You can scan from any TWAIN scanning application instead of
scanning from the OneTouch buttons on your scanner or using the
OneTouch button panel.
A NOTE ABOUT THE TWAIN STANDARD
Your scanner uses the TWAIN interface to scan photographs and
documents. TWAIN is a widely recognized standard that computers use
to receive images from scanners, digital cameras, and other digital
devices. The TWAIN scanning interface can be accessed from any
TWAIN scanning application you have installed on the computer.
Applications such as Nuance PaperPort and ArcSoft PhotoImpression,
which were provided with your scanner, and many other applications,
will use the TWAIN interface for scanning. This section specifically
describes how to use the features of the TWAIN interface for scanning,
however, the instructions in this section may use the PaperPort software
as an example only.
Refer to the User Guide you received with your other scanning
application for instructions on setting up that application to access the
TWAIN interface. As previously stated, the scanning method is the
same, but you will need to refer to your product's user guide for
instructions on how to access the scanner and how file handling works.
Instructions for setting up the PaperPort software to access the TWAIN
interface is provided in this User’s Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
ACCESSING THE TWAIN INTERFACE
As previously stated, you can access the TWAIN interface from any
TWAIN compliant scanning application. You can configure any of your
OneTouch buttons to automatically open the TWAIN interface when
you press a button on the scanner.
Below are instructions for accessing the TWAIN interface from
OneTouch and from PaperPort.
Opening the TWAIN Interface from OneTouch
1. First choose a OneTouch button that you would like to change the
scanning function for, in this example we used the Scan button.
2. Press, hold down, then release the Scan button.
3. When the OneTouch Properties window opens, the Scan tab will
be the active tab.
4. Under Select Configuration click on Configure Before Scan.
5. Right-Click on Configure Before Scan and make sure there is a
check mark next to TWAIN.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
83
6. Click OK to save your changes and close the OneTouch Properties
window.
7. Press the button on the scanner or click on the button on the
OneTouch Panel.
8. The TWAIN interface will now open.
This is the Basic
TWAIN Interface
Click either Advanced Interface or Basic Interface to
toggle between the two TWAIN interface options.
Note: If you choose to use OneTouch Configure Before Scan for
scanning from the TWAIN interface, the final image will be sent to
the destination application set for that button. Please see “Destination
Application Properties” on page 30 for more information on
OneTouch destinations.
Note: At this time the TWAIN interface is where you will adjust your
scan settings. Please see the following section for adjusting the scan
settings in the Basic and Advanced interfaces.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
Opening the TWAIN Interface from PaperPort
1. Open the PaperPort software.
2. Select your Visioneer 7400 scanner in the Scan Pane.
If you do not see a Scan pane down the left side of the PaperPort
window, click on the scan button on the toolbar. The scan button is
on the PaperPort tool bar.
3. Now click on the Scan button in the scan pane window.
Note: If the Scan button in the Scan pane is not active, or there is no
scanner listed in the Scan Pane, you may need to setup PaperPort to
access the scanner. Please see “Setting Up Your Scanner to Work With
PaperPort” on page 102 for instructions on setting up PaperPort to
work with the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
85
SCANNING FROM THE BASIC TWAIN INTERFACE
The Basic Interface allows you to choose modify the basic settings for
scanning. In this interface you can preview the item, make adjustments,
then scan the item with the adjustments appearing in the final image.
1. The Scan Type menu’s option is only Scan Reflective Using for
scanning paper items.
2. Choose the color, grayscale, or black and white option from the
Picture Type menu.
3. Click the Preview button.
The scanner scans the item and displays a preview image. You can
now use the options on the Basic Interface to adjust the image.
4. To adjust the brightness and contrast, drag their sliders to the left or
right.
5. To choose another resolution, use the Resolution (DPI) menu.
6. You can also change the picture type; for example, from color to
grayscale or black & white.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
7. Change the page size from the Paper Size menu.
If you do not want to use one of the preset paper sizes available, you
can create a custom size by telling the scanner to scan only a certain
area. Simply click in the Preview window then drag a box around
the area that you want to scan.
Click and drag a box in the
preview window to scan
only that area of the image.
This is the image that appears in your
application when scanning is complete.
The basic TWAIN interface only allows for one crop area. To create
multiple crop areas change to the advanced TWAIN interface and
select the crop areas from within that interface. See “Creating
Multiple Crop Areas” on page 96.
8. To preview the item with the new settings, click the Preview button
again in the Basic Interface.
9. When you are satisfied with the preview image, click Scan.
10. When you’re finished scanning items, click Done to close the Basic
Interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
87
SCANNING FROM THE ADVANCED TWAIN INTERFACE
Here are the basic steps for scanning with the Advanced TWAIN
Interface. The next section will walk you through all of the image
adjustment options that are available in the Advance TWAIN Interface.
1. Start your TWAIN application and open the TWAIN interface.
If the Basic Interface opens, click the Advanced Interface button.
2. The Advanced Interface opens.
Scan Reflective means that a
“picture” is being taken of the
item on the glass.
Click an icon to select a
configuration—Color, Grey
Scale, or Black&White.
Clicking the “+” sign shows
details of the scan settings.
Click a setting in the list to
change it. The setting’s options
appear on the right side of the
Advanced Interface where you
can make changes if necessary.
Check the Scan Info to
make sure your computer
has sufficient space for the
image. Warning icons on
this box appear if your
computer does not have
enough space for the
When you are satisfied
with the scan settings,
click Scan.
Use these buttons to manu-
ally select settings.
Click Preview to
viewthe imagein
the window.
scanned image’s file.
If you don’t need all the
features of the Advanced
Interface, click Basic
Interface to return to it.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
3. Click one of the icons to select a configuration.
For example, select Color Configurations then select Custom to
scan a color item with the preset Custom scan settings.
The configuration settings appear as a list. Click the + (plus) sign to
see the full list. Click the - (minus) sign to collapse the list.
■ Black&White is for letters, memos, pen and ink drawings, and
other black and white material. This setting produces the
smallest file size for scanned items.
■ Grey Scale scans the image using up to 256 true shades of gray.
Use this setting to scan black and white photographs and other
higher quality black and white images. You can also scan a color
photo with this setting to turn its colors into gray shades. The
file size is about one third the size of a color scan.
■ Color scans the image in full color. Use this setting to scan color
photographs and other color images. The file size is the largest of
the image type options.
4. Click the Preview button to view the image before scanning.
5. Review the image to determine if adjustments are needed.
6. To adjust a setting, click the setting in the list on the left below the
selected configuration.
A panel opens on the right side of the Advanced Interface for the
selected setting. Select new options on that panel.
7. (optional) To preview the image again, click the Preview button
again. Re-adjust the settings if necessary.
8. When you’re satisfied with the image, click the Scan button.
9. When you’re finished scanning items, click Done to close the
Advanced Interface.
10. Your scanned image will now be in your scanning application.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
89
ADVANCED INTERFACE IMAGE ADJUSTMENT OPTIONS
There are several features you can adjust in the Advanced Interface to
produce the best possible image for the items you’re scanning.
To adjust a setting:
1. On the left side of the Advanced Interface, select a configuration,
for example, Color Configurations.
Click a setting in the list of settings, or click its corresponding button on
the right side of the Advanced Interface.
Resolution
Brightness/Contrast
Color (Gamma,
Saturation, and
Hue)
Scan Size
Note: The list of scan settings for a configuration applies only to that
type of configuration. For example, the Black&White Configuration
does not have a setting for adjusting the Color Hue.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
The following figure shows an example of the Advanced Interface if you
click the Resolution setting in the list, or click the Resolution button.
Click to close the
settings panel
Note: The information in the scan settings list and the options you
select on the various settings panels are interactive. As you change the
settings on the panel, the numbers in the list on the left also change.
Note: The location of various buttons on the panels may be slightly
different on your Advanced Interface window. The appearance of the
window depends on your monitor’s screen resolution.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
91
ADJUSTING THE RESOLUTION
Resolution determines the amount of detail you can see in the scanned
image. The resolution setting for a scan is in dots-per-inch (dpi). The
higher the resolution, the finer the details, however, higher dpi settings
also take longer to scan and produce larger files sizes. Usually the higher
resolution settings are used for precision work, such as photographs or
fine artwork.
The following figure shows the resolution options.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
To adjust the resolution:
1. To use one of the preset resolutions for typical scanned items, click
one of the options in the list.
For example, to set the resolution for scanning a business card,
select Business Card. That setting is preset to read small print on a
typical business card.
2. To set the resolution manually, drag the Resolution slider to the left
to decrease the resolution or to the right to increase it.
You can also type a number directly into the resolution setting box,
or click the up and down arrows to increase or decrease the setting.
3. Click Reset to return the resolution to its original setting.
The resolution panel also includes an advanced setting for Moire
patterns. Moire patterns are wavy, rippled lines that sometimes appear
on the scanned images of photographs or illustrations, particularly
newspaper and magazine illustrations. To scan the image and limit or
eliminate moire patterns, select the Reduce Moire option.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
93
ADJUSTING THE BRIGHTNESS AND CONTRAST
Sometimes an item is scanned with the brightness and contrast set to be
too light or too dark. For example, a note written with a light pencil
may need to be scanned darker to improve legibility.
The following figure shows the brightness and contrast options.
Contrast is only available for Color and Grey Scale configurations.
To adjust the brightness and contrast:
1. Drag the Brightness slider to the left to make the item darker or to
the right to make the item lighter.
2. Drag the Contrast slider to the left to decrease the contrast or to
the right to increase the contrast.
You can also type a number directly into the brightness or contrast
setting boxes, or click the up and down arrows next to the box.
3. Click Reset to return the settings to their original numbers.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
ADJUSTING GAMMA, SATURATION, AND COLOR HUE
If you’re using the Color Configuration to scan, you can adjust a group
of color settings. Gamma controls the brightness of the color midtones,
saturation is the strength or purity of a color, and hue is the color your
eyes see as reflected from the image.
The following figure shows the color options.
To adjust the color settings:
1. Drag the Gamma, Saturation, and Color Hue sliders to the left to
decrease the settings or to the right to increase the settings.
You can also type a number directly into the setting boxes, or click
the up and down arrows next to the boxes.
2. Click Reset to return the settings to their original numbers.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
95
ADJUSTING INPUT SIZE
You can scan documents up to 8.5" by 11.69", but you can select other
scan sizes, or adjust the input size to scan only specific sections of an
image. For example, if you’re scanning a photograph and want to focus
on one section, adjusting the input size removes the rest of the
photograph from the final scanned image.
The following figure shows the input size options.
To set the image size:
■ To scan at one of the preset input sizes, select the image size from the
menu.
■ To scan a specific area of the image, click on the image and drag a box
around the area you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
CREATING MULTIPLE CROP AREAS
When you click and drag your mouse in the preview window a dotted
outline shows the selected area in the image.
The following figure shows an example of a manually selected area.
The images that appear in the scanning
application when scanning is finished.
The Scan Info box shows the size and
position of the area. Note that there are
two tabs at the tope of the scan info
box, one tab for each crop area.
The selected scan areas.
Note that the selected area in the example has the number “1” in its
upper left corner indicating it is your first selected area. You can select
up to six separate areas on an image at a time.
■ To move the dotted outline, put the pointer in the selected area and
drag the mouse.
■ To resize the selected area, put the pointer on a dotted line and drag
the line.
As you drag the dotted line, the menu selection for the image size
changes to Custom to indicate you are customizing the size.
The Scan Info box on the lower left portion of the Advanced
Interface shows the information for the new area. If you selected
multiple areas, tabs on the Scan Info box represent each area. Click
on an area’s tab to see its Scan info.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE TWAIN INTERFACE
97
■ If you want to remove the selected area and start over, click Remove
on the Scan Info box.
Note: Clicking Remove re-selects the entire 8.5" by 11.69" area.
■ When the settings are what you want, click Scan.
THE SCAN INFO BOX
The following figure shows the information on the Scan Info
box:
Tabs for each selected area. Click a tab to
see the information for its area.
Location of the top
left corner of the
image in the
Physical size of the
image to scan.
Size of the file of the
scanned image.
Preview window.
Current location of
the pointer as you
drag it on the
Click to remove the
selected area.
The space on your
computer’s hard drive.
Preview window.
THE RULER UNITS
The ruler around the edges of the image help you precisely position a
custom sized image. You can change the ruler units to suit the type of
measurements you want.
To set the ruler units:
1. Click the arrow icon at the top left corner of the Preview Image on
the Advanced Interface.
2. As you click the icon, the ruler units cycle among inches,
centimeters, and pixels.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
CREATE A SCANNING PROFILE
You cannot change the settings of the preset profiles in the Advanced
Interface. However you can create new profiles and save them for future
use.
To create a new profile:
1. On the Advanced Interface, select one of the preset profiles, for
example, Black&White Configurations>Custom.
2. Adjust the settings as required then click the Save As button.
The Save Profile dialog box opens.
3. Type a name for the new profile and click OK. The name must be
at least two characters long.
Your new profile is added to the configuration list.
To change or delete a profile you created:
1. Select your profile from the configuration list.
2. Make changes to the profile as needed, and then click Save.
3. If you want to delete the selected profile, click Delete.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE WINDOWS IMAGE ACQUISITION (WIA) INTERFACE
99
SCANNING FROM THE WINDOWS IMAGE ACQUISITION
(WIA) INTERFACE
Microsoft Windows XP and Vista include their own set of scanning
options—known as Windows Image Acquisition (WIA)—for acquiring
images from scanners, digital cameras, and other digital devices.
The instructions in this section are for scanning using WIA from within
the Microsoft Paint application. In most scanning applications the
scanner will be listed as WIA: Visioneer 7400.
You can also scan using the WIA interface from the OneTouch option
Configure Before Scan. As with scanning from the TWAIN interface,
simply open the OneTouch Properties, right-click on the Configure
Before Scan option and choose WIA from the list.
To scan using WIA from Microsoft Paint:
1. On the Windows taskbar, click Start, point to All Programs, point
to Accessories, then click Paint.
The Paint window opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
2. The scan window opens. Use this window to select scanning
options and start the scan process.
3. Choose the desired scanning mode of Color, Grayscale, or Black
and White. Please see the next page Fine Tuning Your Scans for
instructions using the Custom Settings.
5. Adjust settings of the previewed image as desired:
■ Change the button selection for the type of image.
■ Adjust the custom settings; refer to the next section, “Fine
Tuning Your Scans”.
■ Change the size of the scanned image. To do this, click and hold
the mouse pointer over one of the four sizing-boxes on the
corners of the previewed image. Then drag the box to increase or
decrease the size of the image.
6. Preview the image again. When you are satisfied with the image,
click the Scan button.
7. The scanned images will open in Microsoft Paint (or other
application you’re using to scan with the WIA interface).
Note: The WIA scanning options do not save your last used settings.
Any time you open the WIA scanning interface the default settings
will be selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE WINDOWS IMAGE ACQUISITION (WIA) INTERFACE 101
FINE TUNING YOUR SCANS
You can select new settings before scanning to adjust how you want to
scan a particular item.
To select the scanner settings before you scan:
1. On the Scan using Visioneer OneTouch 7400 window, select the
Custom Settings button, and then click Adjust the quality of the
scanned picture.
The Advanced Properties dialog box opens.
2. Select the options for scanning.
Brightness and Contrast—Drag the sliders to the right or left to
adjust the brightness and contrast of the scanned image. The
Contrast setting does not apply to Black and White picture or text.
Resolution (DPI)—Choose the dots per inch (dpi) of resolution
from the drop-down list. The maximum resolution is 600 dpi, the
minimum is 75 dpi. The higher the dpi setting, the sharper and
clearer the scanned image. However, higher dpi settings take longer
to scan and produce larger files for the scanned images.
Picture type—Select the appropriate type from the drop-down list.
3. Click OK.
The Custom Settings button is set to scan with the new options. If
you want to reset the settings and start over, click Reset.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
SETTING UP YOUR SCANNER TO WORK WITH
PAPERPORT
When you open the PaperPort software the first time, you will be
looking at the PaperPort desktop. This initial view has a tree of folders
down the left side of the desktop. Click on the Scan button on the
toolbar to open the Scan pane on the left side of the screen.
If there is no scanner listed in the top of the Scan pane, or the if the scan
button at the bottom of the scan pane does not activate, then PaperPort
needs to have the scanner added to the scanner database using the
PaperPort Scanner Setup Wizard.
Note: Setting up your scanner is a one-time-only process for each
scanner option. Therefore, you may have to set up your scanner once
each for TWAIN: Visioneer 7400 and WIA: Visioneer 7400. The
setup process, described below, is the same for each option. You will
not have to set up the scanner again for an option unless you
uninstall the scanner and PaperPort software, then re-install them.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR SCANNER TO WORK WITH PAPERPORT 103
To setup your scanner:
1. In the scan pane, click on the Select button.
2. When the Available Scanners window opens, select either TWAIN:
Visioneer 7400 or WIA: Visioneer 7400.
Reminder: You will have to run the setup wizard for each driver.
3. Click on the OK button.
A window opens to begin the setup process.
4. Click No then click Next.
The next window offers you the option to run hardware
diagnostics.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
5. Click Yes (recommended) then click Next.
The next window is for checking the connection between your
scanner and the computer.
6. Click Next.
After the Setup Wizard checks the connections, the next window is
displayed. It has a series of setup options, but only the Basic scan
test is necessary because your scanner was already tested and
calibrated when you installed the OneTouch 4.0 software.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR SCANNER TO WORK WITH PAPERPORT 105
7. Click Next.
The next window tells you to insert a page or photo into the
scanner.
8. Place an item face down on the glass. Align the edge of the item
with the arrow at the upper-left corner of the glass and close the lid.
9. Click Next.
The TWAIN Interface opens.
Note: If you are setting up the scanner for WIA, the WIA interface
opens instead.
Download from Www.Somanuals.com. All Manuals Search And Download.
106
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
10. Click the Scan button on the TWAIN interface.
The Setup Wizard runs the scan test.
A message window opens that says “Basic scan test passed.”
11. Click Next on the message window.
The final Setup window opens to let you know the setup process is
finished.
12. Click Finish.
Your scanner is now setup for the scanning option you selected (in
the example above, it’s the TWAIN option) and the Scan button on
the PaperPort window will now become active.
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING THE SCANNER GLASS 107
Maintenance
This section contains information on cleaning, troubleshooting,
uninstalling, and scanner specifications.
CLEANING THE SCANNER GLASS
Scanning items that have excessive amounts of dirt or dust may dirty the
glass. To ensure the best quality scanned item, wipe the scanner glass
with a soft clean cloth to rid the glass of dust or other debris.
TROUBLESHOOTING
In addition to the troubleshooting information contained in this
section, please see the Readme file on the Installation CD. The Readme
file contains additional information that may help you diagnose
problems with the scanner.
If you try all the troubleshooting procedures described in this section
and in the Readme file, and the scanner still has problems, you may
have a malfunctioning scanner. Please see the technical support card
that you received with your scanner. Also visit our web site at
www.visioneer.com for additional technical information.
Problem: The scanner won’t scan. What’s wrong?
Check for one of these possible problems:
• Is a cable loose or not plugged in securely? Inspect the cable
connections. Make sure all the cables are plugged in securely.
• Is the scanner’s status light on? If the light is not on, plug the USB
cable into a different USB port on the computer. If the scanner is
plugged into a USB hub, try plugging the scanner directly to the back
of the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
• Did you restart the computer after installing the software? If you
didn’t restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
• Did you plug in your scanner before installing the software? If you
plugged in your scanner before installing the software Windows may
not have associated the correct driver files to the scanner. Try
unplugging the scanner for 10 seconds then plugging the scanner
back in. Also try rebooting the computer.
• Did you plug the scanner into a USB hub? If you’re using a USB
hub to connect the scanner, the hub must have its own power supply.
If the hub does not have its own power supply, plug the scanner into
a USB port on the computer.
• Did you select another TWAIN source for acquiring images? If
you use multiple TWAIN devices with your computer, you may have
selected another source for images. Make sure your scanning
application has the Visioneer 7400 scanner selected.
Problem: During installation I got the error message: PaperPort
Installation is not complete. What do I do?
The installation procedure was not successful. You need to reboot your
computer then launch the PaperPort software installation again.
Problem: I got the error message: PaperPort cannot allocate enough
memory to perform internal critical operations. What do I do?
Close any other active applications so that additional memory is
available. If you click Continue, PaperPort moves the file to the
PaperPort data directory and renames the file with the prefix “bad.”
This allows you to recover the file later.
To recover the file, you can import it into PaperPort by using the Import
command in the File menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 109
Problem: The installation will not complete successfully. If
installation finishes, the scanner’s OneTouch 4.0 options do not
seem to work properly. What do I do?
A likely cause is that some driver programs are already installed on your
and OneTouch options, and you need to remove those other drivers and
re-install your Visioneer 7400 USB scanner. Please see the
section “Uninstall Your Scanner” on page 110, but in Step 3, instead of
uninstalling OneTouch 4.0, uninstall the other scanner’s driver
programs. After uninstalling the other scanner’s driver programs,
uninstall OneTouch 4.0 using the steps on page 110, then reinstall it
using the steps on page 6.
Problem: My computer keeps giving me out of memory error
messages. What do I do?
Make sure that your system meets the minimum requirements for using
the scanner.
■ A minimum of 256 MB (megabytes) of internal memory (RAM)
for Windows 2000 and Windows XP
■ 512 MB is the minimum requirement as set by Microsoft for
Windows Vista
Problem: My computer keeps giving me out of hard drive space
error messages. What do I do?
The minimum requirement of 200MB free hard drive space is for the
installation of the software and basic scanning functions. High
resolution scans result in files that can be over 1 gigabyte in size. Free up
space on your hard drive for the software to be able to save the scanned
images.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
UNINSTALL YOUR SCANNER
To uninstall the scanner, remove the Visioneer OneTouch 7400
software, the PaperPort software, or other scanner software provided
with your scanner.
UNINSTALLING THE ONETOUCH SOFTWARE
1. Open the Windows Control Panel from your start menu.
2. Windows 2000 or XP: Double-click the Add/Remove Programs
icon.
Windows Vista: Double-click the Programs and Features icon.
3. From the list of programs, select OneTouch 4.0.
4. Click the Change/Remove or Uninstall button.
5. Follow the uninstall wizard through removing the scanner driver.
6. When the uninstall is complete, unplug the scanner’s USB cable
from the computer.
UNINSTALLING THE PAPERPORT SOFTWARE
1. Open the Windows Control Panel from your start menu.
2. Windows 2000 or XP: Double-click the Add/Remove Programs
icon.
Windows Vista: Double-click the Programs and Features icon.
3. From the list of programs, select OneTouch 4.0.
4. Select PaperPort and click the Remove or Uninstall button.
5. Follow the uninstall wizard through removing the PaperPort
software.
The PaperPort software is removed from your computer.
6. Close all open windows and reboot (restart) your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
VISIONEER 7400 USB SCANNER SPECIFICATIONS 111
VISIONEER 7400 USB SCANNER SPECIFICATIONS
Bit Depth
48-Bit color (internal), 16-Bit gray
(internal), 1-Bit line art/text
Scanning resolution
Maximum Item sizes
Scanner dimensions
Height
Width
Length
Weight
USB Standard
Operating temperature
Optical resolution: 1200 x 1200 dpi
8.5 x 11.69 inches (21.6 x 29.7 cm)
1.4 inches (33 mm)
10.1 inches (257 mm)
14.9 inches (378 mm)
3.3 pounds (1.46 kg)
USB 2.0 Full Speed
50°–104° F (5°–35° C without
condensation)
Relative humidity
20%–80% (@35° C without
condensation)
VISIONEER 7400 USB SCANNER PART LIST
Please use the following part name and number when ordering a
replacement USB cable for your scanner.
Part Name
Part Number
USB Cable
35-0073-000
Download from Www.Somanuals.com. All Manuals Search And Download.
112
VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
I N D E X
Burn to CD 66
Numerics
7400 USB Scanner
Document Cover 2, 3
Maintenance 107
Reference Marks 2, 3, 19
Scanner 1, 2
Burn to CD Properties 67
Document Management 30
Email 30
Email Properties 39
File Formats 41, 43
Image Editing 30
Image Properties 35
OCR 45
Serial Number 13
Specifications 111
Status Light 3
Status light 2
PaperPort 20
Troubleshooting 107
USB Cable 1, 111
USB Port 2, 3
Word Processing 30
Word Processing Properties 33
A
Actual size 56
Document Management Applications 48
Adobe Acrobat Reader 15
Adobe PhotoShop 30
AutoRotate Image 57
F
B
Black&White 53, 54, 88, 100
Blurred Images 54, 92
Brightness 53, 101
Image 41
JPG Properties 42
Properties 41
Text 43
C
Collate copies 57
Color 53, 88, 100
Color Space 10
Fit to page 56
G
Gamma 10, 55
GrayScale 53, 88
Grayscale 100
Configure Before Scan 61
TWAIN 82
Contrast 53, 101
Corel WordPerfect 30
H
HTML 71
Hue 55
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
114
Settings 17
I
Image Editing Applications 48
Image File
BMP 41
JPG 41
PDF 41
TIFF 41
Show All Destinations 47
Online Updates 13
Optical Character Recognition (OCR) 33, 43, 45
Options 45
Installation 5, 6
CD 6
Connect the Scanner 11, 12
OneTouch 9
PaperPort 8
Options Tab
Invert Image 54
Setup 102
M
Maintain aspect ratio 56
Microsoft
Notepad 44
Outlook 28, 30, 39, 44, 48
Outlook Express 30
WordPad 43, 44, 48
Moire Patterns 54, 92
Registration 13
RegID 13
Saturation 55
O
Scan Configuration
New 51
Scan Settings Tab 52
Storage Options Tab 57, 75
Scanner Readme 14
Scanning 16, 19, 22
Books 21
OneTouch 17, 28, 29
Add Text Application 33, 34
Button Panel 16, 22, 24, 29
Button Panel Features 23
Button Tabs 26, 28
Configuring 25
Destination Application 17, 22, 25, 34, 36
Destination Link Properties 31, 35, 37, 39
Document Format 28, 29
File Format 25
Icon 13, 22, 25
Configure Before Scan 82
Download from Www.Somanuals.com. All Manuals Search And Download.
Event Forwarding 69
TWAIN Interface 81
WIA 99
Input Size 95
Shortcut Menu 25
Multiple Crop Areas 96
Options 89
Spreadsheet Applications 45
Sti Event Forwarding 48
Still Image Client 69
System Requirements 4, 109
Options 85
T
Text Editing Applications 48
Text File 43
Excel Spreadsheet (*.xls) 44
Options 44
Simple Text (*.txt) 44
Windows
Mapped Drive 79
Multiple Locations 74, 77
Server Location 79
2000 4
Vista 5, 12, 16, 24, 62, 99
XP 4, 12, 16, 24, 62, 99
Windows Image Acquisition (WIA) 16, 28, 61, 99
Options 100
Storage Options Tab 75
Troubleshooting 107
TWAIN 16, 28, 61
TWAIN Advanced Interface
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
116
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Taylor Electric Grill AG 1350 BL User Manual
Taylor Scale TE10C User Manual
Teac Computer Drive HD2U 100 User Manual
Telex Stereo Amplifier 1790 6A User Manual
Toshiba Portable DVD Player SD C2502 User Manual
Toshiba Power Supply G3 TOSVERT 130 User Manual
Transcend Information Network Card TS0MFLRD6E User Manual
Uniden Automobile Alarm 100xr User Manual
Wacom Graphics Tablet DTK 2400 User Manual
Weber Gas Grill FT 600 User Manual