O w n e r’s
G u i d e
T9700S AND T9700HRT
PLATFORM TREADMILLS
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
ongratulations on choosing a VISION FITNESS Treadmill. You’ve taken
C
an important step in developing and sustaining an exercise program! Your
Treadmill is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your Treadmill can improve the quality of your
life in so many ways…
Here are just a few of the health benefits of aerobic exercise:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
• Reduced Stress
• Help In Countering Anxiety and Depression
• An Improved Self Image
The key to reaping these benefits is to develop the exercise habit. Your
new Treadmill will help you eliminate the obstacles that prevent you from
getting in your exercise time. Snow and rain and darkness won't
interfere with your workout when you have your Treadmill in the comfort of
your home. This Owner’s Guide provides you with basic information on
starting an exercise program. A more complete knowledge of your new
Treadmill will assist you in realizing your goal of a healthy lifestyle.
Service to your Treadmill should only be performed by your
VISION FITNESS retailer. Please contact your authorized VISION FITNESS
retailer should service be required. If a question or problem arises which
cannot be handled by your VISION FITNESS retailer, please contact us:
VISION FITNESS
P.O. Box 280
500 South C.P. Avenue
Lake Mills, WI 53551
Ph: 1.800.335.4348
Fax: 1.920.648.3373
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
A L L M O D E L S
G E N E R A L
SAFETY INSTRUCTIONS . . . . . . . . . . 4
MOVING & LEVELING . . . . . . . . . . . . 7
POWER & EMERGENCY STOP . . . . . 8
FEEDBACK DISPLAY . . . . . . . . . . . . . 9
FEATURES & QUICK KEYS . . . . . . . 12
USER ENGINEERING MODE . . . . . . . 45
TROUBLESHOOTING . . . . . . . . . . . . 48
COMMON QUESTIONS . . . . . . . . . . 50
TENSIONING THE BELT . . . . . . . . . . 51
PREVENTIVE MAINTENANCE . . . . . . .52
HOME WARRANTY . . . . . . . . . . . . . 54
COMMERCIAL WARRANTY . . . . . . . . 56
DEVELOPING A FITNESS PROGRAM . 58
EXERCISE GUIDELINES . . . . . . . . . . 59
BALANCED FITNESS . . . . . . . . . . . .60
STRETCHING . . . . . . . . . . . . . . . . .61
WEEKLY WORKOUT LOGS . . . . . . . . 64
MONTHLY WORKOUT LOGS . . . . . . 66
T 9 7 0 0 S CONSOLE
FEATURES . . . . . . . . . . . . . . . . . . 14
EASY START . . . . . . . . . . . . . . . . . 15
T 9 7 0 0 H R T CONSOLE
USER LOG-IN . . . . . . . . . . . . . . . . 16
FEATURES . . . . . . . . . . . . . . . . . . 17
CHOOSING PROGRAM, LEVEL, TIME . 18
PROGRAM DETAILS . . . . . . . . . . . . 20
HRT - FAT BURN . . . . . . . . . . . . . . 24
HRT - SPEED TRAINING . . . . . . . . . . 28
HRT - ENDURANCE . . . . . . . . . . . . . 33
HEART RATE TRAINING . . . . . . . . . . 38
RATE OF PERCEIVED EXERTION . . . . .39
CUSTOM PROGRAMS . . . . . . . . . . . 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE
HANDLEBARS
SIDE
RAILS
MOTOR
COVER
RUNNING BELT
LEVELERS
TRANSPORT WHEELS
3
T 9 7 0 0 S
T 9 7 0 0 H R T
FULL PLATFORM TREADMILLS
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using an electrical product, basic precautions should always be
followed, including the following:
Read all instructions before using this exercise product.
WARNING!
To reduce the risk of burns, fire, electrical shock or injury
to persons:
•
Use this exercise product for its intended use as described in this Owner’s
Guide. Do not use attachments not recommended by the manufacturer.
Never drop or insert any object into any opening.
Do not remove the Treadmill motor covers or roller covers. Service should
be performed only by an authorized VISION FITNESS retailer.
Never operate this Treadmill if it has a damaged cord or plug, if it is not
working properly, if it has been damaged, or immersed in water. Return
the Treadmill to a retailer for examination and repair.
Keep the cord away from heated surfaces.
•
•
•
•
•
•
Do not use outdoors.
To disconnect, turn the switch to the OFF position, then remove plug from
outlet.
•
•
Never place the power cord under carpeting or place any object on
top of the power cord, which may pinch and damage it.
Unplug your VISION FITNESS Treadmill before moving it.
CHILDREN
•
•
Keep children off your VISION FITNESS Treadmill at all times.
When the VISION FITNESS Treadmill is in use, young children and pets
should be kept at least 10 feet away.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER REQUIREMENTS
This product is for use on a nominal 120-volt circuit, and has a grounding
plug that looks like the plug illustrated below. An improper connection of
the equipment grounding conductor can result in a risk of an electrical
shock. Do not modify the plug that was provided with this product. If this
plug does not fit into your outlet, have a qualified electrician install the
proper outlet. Adapters, extension cords and surge protectors should not
be used with this product. Also, a GFI protected receptacle should not be
used. It is recommended to use a 20 amp dedicated circuit.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER SAFETY TIPS FOR YOUR VISION FITNESS TREADMILL
CAUTION!: If you experience chest pains, nausea, dizziness or shortness of
breath, stop exercising immediately and consult your physician before
continuing.
•
•
Do not wear clothing that might catch on any part of the Treadmill.
Read this Owner’s Guide before operating this Treadmill.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MOVING YOUR VISION FITNESS TREADMILL
Your VISION FITNESS Treadmill has a pair of transport wheels built
into the front legs. To move, firmly grasp the back end of the frame,
carefully lift and roll.
CAUTION: Our Treadmills are well-built and heavy, weighing up to
300 lbs.! Use care and additional help if necessary.
PLACEMENT IN YOUR HOME
It is important that you place your Treadmill in a comfortable and inviting
room. Your Treadmill is designed to use minimal floor space. Many
people will place their Treadmills facing the TV or a picture window. If at
all possible, avoid putting your Treadmill in an unfinished basement. To
make exercise a desirable daily activity for you, the Treadmill should be in
an attractive setting.
NOTE: If you place your Treadmill facing out from a wall, you should leave
3 feet between the wall and the Treadmill to ensure safe operation.
LEVELING
The Treadmill should be level for optimum use. Once you have placed the
Treadmill where you intend to use it, raise or lower one or both of the
adjustable levelers located on the back of the Treadmill frame. A carpenter’s
level is recommended. If your Treadmill is not level, the running belt may
not track properly. Once you have leveled the Treadmill, lock the levelers
in place by tightening the nuts against the frame.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER
Ensure that your Treadmill is
properly connected to a power
outlet, then turn on the Power
switch, located at the front of the
main frame.
EMERGENCY STOP
If at any time you need to stop the
Treadmill quickly, simply press the
red Emergency Stop button. This
will instantly cut all power and the
Treadmill will come to a stop. To
resume your workout, you will
need to re-enter any data.
SAFETY MAGNET
Your VISION FITNESS Treadmill
will not start unless the Safety
Magnet is inserted into the circle in
the console overlay. You should
attach the clip end to your cloth-
ing. If at any time you need to
stop the Treadmill quickly simply
pull the Safety Magnet off the
console. This will cut all power to
the Treadmill and it will come to a
complete stop. To resume your
workout, place the Safety Magnet
back in place. This will send you
back to the start-up mode.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700S & T9700HRT FEEDBACK DISPLAY
ALPHANUMERIC MESSAGE CENTER
This is a display that will scroll the operation instructions in the top center
display window. It will also display your feedback when the LED next to
the appropriate word is lit.
TIME
Shown as Minutes:Seconds. View the Time remaining or the Time elapsed
in your workout.
DISTANCE
Shown as Miles or Kilometers. View Distance traveled during workout.
CALORIES
Shown as estimated accumulated Calories burned during workout.
HEART RATE
Shown as Beats-per-Minute. You can monitor your Heart Rate at any time
during a workout by using the Heart Rate Chest Strap or gripping the
Heart Rate Sensors on the front handlebar.
AVERAGE SPEED
Shown as Miles per Hour or Kilometers per Hour. Equals accumulated
Distance ÷ elapsed Time. Corresponds to simulated outdoor walking or
running Speed.
9
PACE
Shown as Time (Minutes:Seconds) required to travel 1 mile at current Speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700S & T9700HRT
FEEDBACK DISPLAY
ELEVATION
Shown as percentage of incline,
Elevation is visible in the left-hand
LED window. Indicates how steeply
inclined the running surface is, to
simulate walking/running on a hill.
SPEED
Shown as Miles/Hour or
Kilometers/Hour, Speed is visible
in the right-hand LED window.
Indicates how fast the running
surface is moving, to simulate
outdoor walking/running.
PROFILE MATRIX WINDOW 10 X 21
The Left dots #1-10 will show an
Elevation Profile in 10 segments in
ORANGE. This profile is not an
exact representation of the
elevation profile, but just a bar
graph.
The Right dots #1-10 will show a
Speed Profile in 10 segments in
RED. This profile is not an exact
representation of the speed profile,
but just a bar graph.
(continued on next page.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700S & T9700HRT
FEEDBACK DISPLAY
PROFILE MATRIX WINDOW 10 X 21
The Center column will be the
Segment Progress Bar. The bar will
be displayed in GREEN and
shows how much time is left in
your current segment. This will take
the segment time and divide it into
10 dots and as you complete
more of the segment more of the
dots are lit.
For example: if your workout is 10 minutes long, each segment is 1 minute
long. The Segment Progress Bar will then divide that 1 minute into 10 dots
of 6 seconds per dot. The dots would clear and start counting up as each
segment passes. There would be an audio beep to signal the segment
change.
SCAN FUNCTION
To scan through the functions
during your workout, simply press
the SELECT button. To continuously
Scan, press and hold until the
Console double-beeps (about 2
seconds.)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700S & T9700HRT FEATURES
USER LOG-IN
The console on the T9700S and T9700HRT has a special feature that
allows you to Log-In and save all data from your workout. To use this
function follow these steps.
PRESS LOG-IN BUTTON
When selected, the green LED
next to the button will be lit. Use
the Arrow keys to choose a user
I.D. number (1-10). This will
appear in the Alphanumeric
Message Center. Then press
SELECT. Press START or use arrows
to select time of workout.
SPEED QUICK KEYS
After pressing the Start button, you can change the speed of the tread-
mill by pressing one of the Speed Quick Key buttons numbered 1-9.
Each key represents a mile/kilometer per hour. For example, when you
press 3, the treadmill will adjust the speed to 3 mph/kmph.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ELEVATION QUICK KEYS
After pressing the Start button, you can change the elevation of the
treadmill by pressing one of the Elevation Quick Key buttons numbered
1-9. Each key represents a % incline. For example if you press 3, the
treadmill will elevate to a 3% incline.
CONTACT HR BAR
Using the contact heart rate bar will give you a quick view of your heart
rate. To use the contact heart rate bar, just grab the metal handgrips. Your
heart rate will appear in the Alphanumeric Message Center. Your heart
rate is an excellent indicator of exercise intensity. For more information
about your heart rate and exercise, please see Page 38 of this Owner’s
Guide.
NOTE: For the Heart Rate Training programs you must use the chest
transmitter. See Page 40.
CARDIO PORT
A Cardio Port is located on the back of the console that is compatible to
entertainment protocol such as Cardio Theater. The top port is the active
port to use for this function.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700S FEATURES
USER TOTALS BUTTON
To use this function you will need to use the same User Log-In code and
follow these three steps.
PRESS TOTALS BUTTON
When selected, the orange LED
next to the button will be lit. Use
the Arrow keys to enter your User
I.D. Number. This is the same
number that you use to log-in
before you begin working out.
Then press SELECT.
TOTALS ARE DISPLAYED
Now your accumulated totals for
Distance, Hours, Calories, and
Average Speed are displayed.
They will scroll across the
Alphanumeric Message Center.
RESET USER TOTALS
When reviewing your user totals,
simply press and hold the STOP
key on the overlay. This will clear
the user total information.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700S EASY START
To start the T9700S, simply press
START; the Treadmill will start and
Time will count up.
CHOOSING A TIME
Choose Time using Arrow keys
and press SELECT. The Time
window will blink to let you know
what time you have input. Time
will count down.
ENTERING YOUR WEIGHT
Enter weight using Arrows and
press START. The Alphanumeric
Message Center window will
display “Weight lbs. 150” to let
you know what Weight you have
input. After you press START the
Matrix will display a 3,2,1 count
down and “beep”. The belt will
start after the count down
15
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT FEATURES
USER LOG-IN
The console on the T9700HRT has a special feature that allows you to
Log-In and save all data from your workout. To use this function follow
these steps.
PRESS LOG-IN BUTTON
When selected, the green LED
next to the button will be lit. Use
the Arrow keys to choose a user
I.D. number (1-10). This will
appear in the Alphanumeric
Message Center. Then press
SELECT.
CHOOSE A PROGRAM
Select the desired program by
using one of the Program
Quick-Keys or press START to enter
the Manual mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT FEATURES
USER TOTALS BUTTON
To use this function you will need to use the same User Log-In code and
follow these three steps.
PRESS TOTALS BUTTON
When selected, the orange LED
next to the button will be lit. Use
the Arrow keys to enter your User
I.D. Number. This is the same
number that you use to log-in
before you begin working out.
Then press SELECT.
TOTALS ARE DISPLAYED
Now your accumulated totals for
Distance, Hours, Calories, and
Average Speed are displayed.
They will scroll across the
Alphanumeric Message Center.
RESET USER TOTALS
When reviewing your user totals,
simply press and hold the STOP
key on the overlay. This will clear
the user total information.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHOOSE A PROGRAM
Select the desired program by
using one of the Quick-Keys or
user program keys. You may also
press START to enter the Manual
mode.
CHOOSING A LEVEL
Choose Level using Arrow keys
and press SELECT. The elevation &
speed window will display the
programs maximum elevation &
speed.
The
Alphanumeric
Message Center will also display
“Level1”, etc..
CHOOSING A TIME
Choose Time using Arrow keys
and press SELECT. The Time
window will blink to let the user
know what time they have input.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERING YOUR WEIGHT
Enter weight using Arrows and
press START. The Alphanumeric
Message Center window will dis-
play “Weight lbs. 150” to let the
user know what their Weight is.
After you press START the Matrix
will display a 3,2,1 count down
and “beep”. The belt will start after
the count down
19
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT PROGRAM DETAILS
PROGRAM QUICK-KEYS
We have made choosing a program
simple and easy with our program
Quick-Key feature. All you need to do
is press one of the pre-set program
Quick-Keys and you are on your way
to starting your program. We have
divided our programs into three
categories; Fat Burn, Speed Training,
and Endurance. By doing this you
now have a quick reference on what
type of workout you will be doing.
PROGRAM LEVELS
All programs, except for Heart Rate Training programs, have 9 levels. By having
9 levels to choose from, you can change the intensity of your workout as your
fitness level improves. In general, the beginner levels have lower level numbers and
the most advanced levels have higher level numbers. For example, L9 will be the
most advanced workout and L1 will be the beginner level. If you are not sure what
fitness level you are at, you should start out at a lower level and work up to a
comfortable level.
NOTE: All programs can provide an aerobic and cardiovascular benefit in
addition to the specific benefits listed.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT PROGRAM DETAILS - FAT BURN
The Fat Burn programs use changes in speed or elevation to increase your
calorie burn, yet keep you within your Target Heart Rate Zone. Great for
people who want to drop a few pounds, or just to keep a consistent
exercise program moving along.
Set the speed you want
to exercise at, and the program will change
the elevation to keep you in your Target Heart
Rate Zone. The program default time is 32
minutes.
Uses gradual fitness
intervals of changing elevation to increase
your calorie burn, yet not overexert you. The
program default time is 32 minutes.
Uses randomly chosen
speed and elevation changes to increase or
decrease your workout intensity. The program
default time is 32 minutes.
This
program
uses
gradual fitness intervals of speed and
elevation to increase your calorie burn. The
program default time is 32 minutes.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT PROGRAM DETAILS - SPEED TRAINING
The Speed Training Programs use effort intervals and recovery intervals to
help with your performance training. These programs are great for
building speed and peak performance for all athletic activities.
Set your heart rate goal,
as well as effort and recovery interval times,
and the program will adjust your speed to
reach the goal. The program default time is
32 minutes.
Challenge yourself with
this effort and recovery speed interval
program. The program default time is 32
minutes.
Helps you to develop
strength with effort and recovery elevation
intervals. The program default time is 24
minutes.
This speed training
program improves your cardiovascular
capacity by gradually increasing speed
followed by a gradual cool down. The
program default time is 32 minutes.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT PROGRAM DETAILS - ENDURANCE TRAINING
The Endurance Training Programs uses gradual increases in elevation
and/or speed to develop endurance. These programs are great training
tools for those who have set a personal goal of competing in a race, or
for those who want to increase their endurance in other activities.
Increases your endurance
by changing speed and elevation, while
keeping at the Target Heart Rate that you set.
The program default time is 32 minutes.
Imagine yourself running
through beautiful scenery as this 5K program
gradually changes elevation. There is no pre-
set time. You run at your own pace.
This program simulates a
10K run that gradually increases in elevation,
before its gradual decent. There is no preset
time. You control the pace.
Improves your cardio-
vascular conditioning by simulating a plateau
hill climb. The program default time is 48
minutes.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT HEART RATE TRAINING - FAT BURN
HEART RATE TRAINING - ELEVATION ONLY
Program default is 32:00 minutes
Enter Target Heart Rate, Time, & Weight.
The treadmill has a manual mode warm up until you reach your Target
Heart Rate. During the warm up mode you control both speed and
elevation. This does not count for the program time. Once you reach your
Target Heart Rate, the treadmill now controls your Heart Rate by Elevation
only to keep you in your Target Zone. You now only have control of the
Speed of the treadmill. This will repeat throughout the program.
NOTE: You can follow these instructions below or you can use the scrolling
instructions in the Alphanumeric Message Center.
CHOOSE THE FAT BURN HRT PROGRAM
Press the HRT Elevation Button
under the Fat Burn section of
Quick-Keys.
ENTER TARGET HEART RATE
(See Page 38 to determine your
recommended Target Heart Rate.)
Using either set of Arrow buttons,
enter your Target Heart Rate and
press the SELECT button.
NOTE: The Function Window will
blink and the heart rate LED will be lit
to let you know what your Target
Zone is.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CHOOSE PROGRAM TIME
After you have chosen your Target
Heart Rate, the time window will
show the program default time of
32:00. You may change the Time,
using either set of Arrow
buttons. Press the SELECT button to
enter your Time. The Minimum
Time for this program is 5 minutes.
If you are ready to begin
exercising, press the START button.
Optionally, if you wish to enter
your weight, proceed to the next
step.
NOTE: The function window will
blink and the time LED will be lit to
let you know what time you have
input.
ENTERING YOUR WEIGHT
Enter weight using Arrows and
press START. The Alphanumeric
Message Center window will dis-
play “Weight lbs. 150” to let the
user know what their Weight is.
After you press START the Matrix
will display a 3,2,1 count down
and “beep”. The belt will start after
the count down
25
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP MODE
Now the treadmill is in the manual
warm up mode. You are now in
control of both the speed and
elevation to reach your target
Heart Rate Zone. Once a steady
Heart Rate within 5+/- Beats Per
Minute of your entered Target
Zone is found, the console will
beep 3 times and then enter the
Heart Rate Training mode.
NOTE: The matrix window will
scroll: “At target beginning heart
rate training.”
PROGRAM MODE
Now the treadmill will auto-
matically adjust your elevation to
keep you in your Target Zone. This
will repeat throughout the
program.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
COOL-DOWN MODE
After you have completed your
timed workout, the console will
display: “Cool Down Mode, Press
Stop to complete workout”. This is
to let you know that your program
has ended. You are now in a
manual mode cool down and
have control of the Speed and
Elevation. This lets you cool down
at your own pace. You may now
press the SELECT button to view
your totals.
ENDING THE PROGRAM
Once you feel your cool down has
elapsed, press the STOP button
and the treadmill will stop.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT HEART RATE TRAINING - SPEED TRAINING
HEART RATE TRAINING - SPEED ONLY
Program default is 32:00 minutes
Enter Target Heart Rate, Program Time, Work Time, Rest Time, & Weight.
The treadmill has a manual mode warm up until you reach your Target
Heart Rate. During the warm up mode you control both speed and
elevation. This does not count for the program time. Once you reach your
Target Heart Rate, the treadmill now controls your Heart Rate by Speed
only to keep you in your Target Zone. You now only have control of the
Elevation of the treadmill. This will repeat throughout the program.
NOTE: You can follow the instructions below or you can use the scrolling
instructions in the Alphanumeric Message Center.
CHOOSE THE SPEED TRAINING HRT
PROGRAM
Press the HRT Interval Button under
the Speed Training section of
Quick-Keys.
ENTER TARGET HEART RATE
(See Page 38 to determine your
recommended Target Heart Rate.)
Using either set of Arrow buttons,
enter your Target Heart Rate and
press the SELECT button.
NOTE: The Function Window will
blink and the heart rate LED will be lit
to let you know what your Target
Zone is.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CHOOSE PROGRAM TIME
After you have chosen your Target
Heart Rate, the time window will
show the program default time of
32:00. You may change the Time,
using either set of Arrow
buttons. Press the SELECT button to
enter your Time.
NOTE: The function window will
blink and the time LED will be lit to
let you know what time you have
input.
CHOOSE INTERVAL WORK TIME
After you have chosen your
Program Time, you will now need
to enter your HRT Interval Work
Time. This is the time that you are
using Heart Rate feedback to
control speed. To change the time
use either set of Arrow buttons to
enter your Interval Work Time and
press the SELECT button.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHOOSE INTERVAL REST TIME
After you have chosen your
Program Time, you will now need
to enter your HRT Interval Rest
Time. This is the rest time between
your Work Interval. To change the
time, use either set of Arrow
buttons to enter your Interval Rest
Time and press the SELECT button.
If you are ready to begin
exercising, press the START button.
Optionally, if you wish to enter
your weight, proceed to the next
step.
ENTERING YOUR WEIGHT
Enter weight using Arrows and
press START. The Alphanumeric
Message Center window will
display “Weight lbs. 150” to let
you know what your Weight is.
After you press START the Matrix
will display a 3,2,1 count-down
and “beep”. The belt will start after
the count-down
30
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP MODE
Now the treadmill is in the manual
warm up mode. You are now in
control of both the speed and
elevation to reach your target
Heart Rate Zone. Once a steady
Heart Rate within 5+/- Beats Per
Minute of your entered Target
Zone is found, the console will
beep 3 times and then enter the
Heart Rate Training mode.
NOTE: The matrix window will
scroll: “At target beginning heart
rate training.”
PROGRAM MODE
Now the treadmill will auto-
matically adjust your speed to
keep you in your Target Zone. This
will repeat throughout the
program.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
COOL-DOWN MODE
After you have completed your
timed workout, the console will
display: “Cool Down Mode, Press
Stop to complete workout”. This is
to let you know that your program
has ended. You are now in a
manual mode cool down and
have control of the Speed and
Elevation. This lets you cool down
at your own pace. You may now
press the SELECT button to view
your totals.
ENDING THE PROGRAM
Once you feel your cool down has
elapsed, press the STOP button
and the treadmill will stop.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
T9700HRT HEART RATE TRAINING - ENDURANCE
HEART RATE TRAINING - ELEVATION & SPEED
Program default is 32:00 minutes
Enter Target Heart Rate, Time, & Weight.
The treadmill has a manual mode warm up until you reach your Target
Heart Rate. During the warm up mode you control both speed and
elevation. This does not count for the program time. Once you reach your
Target Heart Rate, the treadmill now controls your Heart Rate by Speed
and Elevation. The speed will be automatically adjusted first up to 1 MPH
greater or less than the current Target Heart Rate Speed. After the console
automatically adjusts your speed up to 1 MPH more or less than the Target
Heart Rate Speed, the elevation will take over and adjust your elevation
to keep you in your Target Zone. This will repeat throughout the program.
NOTE: You can follow these instructions below or you can use the scrolling
instructions in the Alphanumeric Message Center.
CHOOSE THE ENDURANCE HRT
PROGRAM
Press the HRT Elevation & Speed
Button under the Endurance
section of Quick-Keys.
ENTER TARGET HEART RATE
(See Page 38 to determine your
recommended Target Heart Rate.)
Using either set of Arrow buttons,
enter your Target Heart Rate and
press the SELECT button.
NOTE: The Function Window will
blink and the heart rate LED will be lit
to let you know what your Target
Zone is.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CHOOSE PROGRAM TIME
After you have chosen your Target
Heart Rate, the time window will
show the program default time of
32:00. You may change the Time,
using either set of Arrow
buttons. Press the SELECT button to
enter your Time. The Minimum
Time for this program is 5 minutes.
If you are ready to begin
exercising, press the START button.
Optionally, if you wish to enter
your weight, proceed to the next
step.
NOTE: The function window will
blink and the time LED will be lit to
let you know what time you have
input.
ENTERING YOUR WEIGHT
Enter weight using Arrows and
press START. The Alphanumeric
Message Center window will dis-
play “Weight lbs. 150” to let the
user know what their Weight is.
After you press START the Matrix
will display a 3,2,1 count down
and “beep”. The belt will start after
the count down
34
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP MODE
Now the treadmill is in the manual
warm up mode. You are now in
control of both the speed and
elevation to reach your target
Heart Rate Zone. Once a steady
Heart Rate within 5+/- Beats Per
Minute of your entered Target
Zone is found, the console will
beep 3 times and then enter the
Heart Rate Training mode.
NOTE: The matrix window will
scroll: “At target beginning heart
rate training.”
PROGRAM MODE
Now the treadmill will auto-
matically adjust your speed and
elevation to keep you in your
Target Zone for your work
intervals. This will repeat throughout
the program. It will adjust speed
first, then elevation. Never both at
the same time.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
COOL-DOWN MODE
After you have completed your
timed workout, the console will
display: “Cool Down Mode, Press
Stop to complete workout”. This is
to let you know that your program
has ended. You are now in a
manual mode cool down and
have control of the Speed and
Elevation. This lets you cool down
at your own pace. You may now
press the SELECT button to view
your totals.
ENDING THE PROGRAM
Once you feel your cool down has
elapsed, press the STOP button
and the treadmill will stop.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL HEART RATE TRAINING RECOMMENDATIONS
To use the Heart Rate Training Program, it is important to determine your
Target Heart Rate, using the chart below. After determining your Target,
you should use the treadmill in MANUAL mode to see if the Target you
have selected is correct. This will give you a good base to start your Heart
Rate Training. If you feel your Target is too low or too high, keep using the
treadmill in the MANUAL mode until you feel comfortable during your
workout; then you can begin using the Heart Rate Training Program.
EXERCISE INTENSITY
T
To reap the most cardiovascular benefits from your workout, it is necessary
to exercise within a recommended intensity. The two ways to monitor
exercise intensity are Target Heart Rate, and Perceived Exertion.
T790HR
TARGET HEART RATE
Target Heart Rate is a percentage of your maximum heart rate. Target
Heart Rate will vary for each individual, depending on age, current level
of conditioning, and personal fitness goals. Exercise heart rate should
range from 55% to 85% of your maximum heart rate. As a point of
reference, we use the predicted maximum heart rate formula of
(220 minus age) to determine your heart rate training zone. Please use the
following chart to determine your predicted Target Heart Rate.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
RATE OF PERCEIVED EXERTION
Rate of Perceived Exertion (R.P.E.) is one of the easiest ways to monitor
exercise intensity. By becoming familiar with the RPE scale, you can
continually assess your level of intensity and insure a level of exertion that
is comfortable. An increase in exercise intensity is directly related to
elevation in exercise heart rate. Consequently RPE can be used alone or
together with heart rate when monitoring exercise intensity.
RPE SCALE
0
Nothing at all
Very, very weak
Very weak
Weak
.5
1
2
3
Moderate
4
5
Somewhat strong
Strong
6
7
Very strong
8
9
10
Very, very, strong
Maximal
The recommended RPE range for most people is between 3 (moderate)
and 5 (strong). The RPE should be independent of your pace; it is
dependent on the feelings caused by the exertion.
NOTES FOR YOUR HEART RATE TRAINING PROGRAMS
• If there is no Heart Rate detected, the Treadmill will not speed up or down.
• If the Heart Rate detected is higher than the Target Zone by 10 BPM the
console will “beep” 4 times to warn the user.
• If the Heart Rate detected is higher than the Target Zone by 15 BPM,
the console will “beep” 4 times, stop, and then continue beeping 4 times
again and the same process will repeat 5 times.
• If the user’s Heart Rate is 20 beats over their Target Zone, the Treadmill
will “beep” 5 times then Shut Down.
39
NOTE: At all times the speed and elevation keys are operative for the user.
Download from Www.Somanuals.com. All Manuals Search And Download.
Prior to wearing the Strap on your chest, moisten the two rubber
contact pads with several drops of water and spread about with your
fingers.
T
T790HR
USING THE WIRELESS
CHEST TRANSMITTER
Center the Transmitter Strap just
below the breast or pectoral
muscles, directly over your sternum
with the VISION FITNESS logo
facing out.
Adjust the elastic strap length to
avoid bouncing or sliding.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOM PROGRAMS
Design your own Programs by setting the desired Speed and Elevation. All
Programs have 10 intervals and a minimum program Time of 10 minutes.
By designing your own programs you now can control your fitness goals
workout by workout. This allows you to modify your training based on
certain events or milestones you may have set for yourself.
PROGRAM DETAILS
PROGRAMMING A PROGRAM
T790HR
Select a user program by pressing
one of the User Program Buttons.
T
ENTER PROGRAM TIME
Enter Time using Arrows, then
press the SELECT button to save
total workout time.
NOTE: The Alphanumeric Message
Center will scroll two messages:
“Press arrow keys to modify
program” and “Press select to
accept program”.
ENTERING YOUR WEIGHT
After you have completed entering
your segment data, you may now
enter your Weight. By entering
your Weight, the totals for Calories
will be adjusted according to your
entered Weight.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTER SEGMENT SPEED
The #1 column will blink. Press Speed Arrows to change the segment
column Speed (Speed numeric values changing with red column).
NOTE: The Alphanumeric Message Center will scroll: “Press select to move
to next interval”.
ENTER SEGMENT ELEVATION
Then press the Elevation Arrows to change the segment column Elevation
(notice Elevation numeric values changing with orange column).
NOTE: The Alphanumeric Message Center will scroll: “Press select to move
to next interval”.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SAVING SEGMENT DATA
Press the SELECT button to store Speed and Elevation, then proceed to the
next column.
NOTE: Repeat entering segment speed and segment elevation until all 10
segments are completed.
BEGINNING WORKOUT
Begin your exercising in your new
Custom Program by pressing the
START button.
NOTE: This program will be saved
permanently and may be changed
by repeating the steps above.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
USER ENGINEERING MODE (Models T9700S & T9700HRT Only)
Your treadmill offers a User Engineering Mode that can access certain
data and help to troubleshoot your treadmill. User Engineering Mode is
designed for you to access functions that will not affect important treadmill
settings. To access this mode please hold down SPEED DOWN and
SELECT for 5 seconds while the treadmill is in any state of setting up a
program.
When in the User mode, "USER MODE" displays in the
alphanumeric window. To access the data press the ELEVATION keys to
scroll through the available data/functions. To select the data/function,
press START. To exit, press STOP.
UNITS
P6 represents units, English or Metric. You can select this configuration for
your treadmill.
The treadmill configuration appears in the alphanumeric window. If an "E"
is shown, the treadmill is configured in English units (miles/mph); "M"
represents a Metric configuration (kilometers/kph). Press the SPEED arrows
to toggle between English and Metric.
In order to save the modified value, press SELECT. Note that changing
units does affect the stored value of weight and clears any stored user
programs.
Changing units may also require you to perform
auto-calibration.
DEFAULT WEIGHT
P8 represents default weight. Weight appears in the right window. To
modify weight, press the SPEED arrows. To save the new default weight,
press SELECT prior to exiting. If Units is modified immediately prior,
weight defaults to 150 lbs. or 68 kg.
ACCUMULATED TIME
P9 represents accumulated time, in hours. The SPEED keys are disabled
while viewing. To exit, press STOP. This information can not be modified.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCUMULATED DISTANCE
P10 represents accumulated distance, in either miles or kilometers. The
SPEED keys are disabled while viewing. To exit, press STOP. This
information can not be modified.
DECK LUBRICATION MESSAGE
P16 represents whether the service message for deck lubrication has been
enabled. If enabled, a "1" appears in the right window. Otherwise, a
"0" appears if disabled.
CLEAN TREADMILL MESSAGE
P17 represents whether the service message for clean treadmill has been
enabled. If enabled, a "1" appears in the right window. Otherwise, a
"0" appears if disabled.
To disable the message, you must press one of the SPEED keys so that a
"0" appears in the right window. Then press SELECT to save prior to exit-
ing. To exit, press STOP.
CHECK MOTOR BRUSHES MESSAGE
P18 represents whether the service message for check motor brushes has
been enabled. If enabled, a "1" appears in the right window. Otherwise,
a "0" appears if disabled.
To disable the message, you must press one of the SPEED keys so that a
"0" appears in the right window. Then press SELECT to save prior to
exiting. To exit, press STOP.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO-CALIBRATION (Models T9700S & T9700HRT Only)
DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO-CALIBRATION!
You need to access User Engineering Mode to run the Auto Calibration.
To access this mode, please hold down SPEED DOWN and SELECT for
5 seconds. When in the User mode, "User Mode" appears in the
alphanumeric window. To access the data press the ELEVATION keys until
"Auto-Cal" appears. Press Start to select this function.
To begin auto-cal, press START. The treadmill will run through minimum
and maximum speed and maximum incline. This will take 3-5 minutes. Let
the treadmill perform this complete function before exiting the Engineering
Mode.
Elevation A/D or Elevation in % appears in the left window. PWM value
or Speed appears in the right window. "Cal Passed" will appear in the
center window when the auto-calibration is complete. The treadmill will
come to a complete stop and return to the start-up screen in the
alphanumeric window.
EXIT USER ENGINEERING MODE
P19 represents exit mode. When you press START to select the function,
the console performs a reboot, returning to program setup.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING YOUR TREADMILL
Our Treadmills are designed to be reliable and easy to use. If, however,
you have a problem, these troubleshooting steps may indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: Check to make sure the Treadmill is connected to a
functioning outlet, and that the Treadmill is turned on.
PROBLEM: The Treadmill’s built-in circuit breaker trips repeatedly,
shutting-off for no apparent reason.
SOLUTION: The lubricating wax coating on the deck is wearing down
and needs to be replenished; contact your VISION FITNESS retailer.
PROBLEM: The Treadmill shuts off when elevated.
SOLUTION: Check to make sure that the power cord is not stretched so
tight that when the Treadmill is elevated the cord is pulled out of the wall
outlet.
PROBLEM: The running belt does not stay in the center of the Treadmill
when you are running on it.
SOLUTION: 1) Check to make sure the Treadmill is level. 2) The running
belt is loose and needs to be properly tensioned (see Page 51 for proper
procedure).
PROBLEM: The belt moves within 1/4” of -- but does not touch -- the side rail.
SOLUTION: There is nothing wrong, this is normal and will not cause any
damage.
NOTE: If the above steps do not remedy the problem, discontinue use, turn
the power off and contact your VISION FITNESS retailer.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING YOUR HEART RATE MONITOR CHEST STRAP
PROBLEM: No pulse reading appears
SOLUTION: There may be a poor connection between the contact
pads and skin. Remoisten electrodes.
SOLUTION: Transmitter is not properly positioned. Reposition the chest strap.
SOLUTION: Verify that the distance between transmitter and receiver is not
beyond the recommended range of 36 inches.
PROBLEM: There is an erratic pulse rate.
SOLUTION: Chest strap is too loose; readjust according to directions.
NOTE: It is possible that heart rate monitors will not function properly on
some people due to a variety of reasons. It may be necessary to
experiment with the fit and position of the chest strap. Outside
interference sources such as computers, motors, etc. are also a major
source of problems for heart rate monitors.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMON TREADMILL QUESTIONS
Q: Are the sounds my Treadmill makes normal?
A: All Treadmills make a certain type of thumping noise due to the belt
riding over the rollers. This noise will diminish over time, although it might
not totally go away. With use, the belt will stretch, causing the belt to ride
more smoothly over the rollers. It might appear that one Treadmill is
louder another. There are many reasons for this and may not be due to a
defect.
Q: Why is the Treadmill I had delivered louder than the one at the store?
A: All fitness products seem quieter in a large store showroom because
there is generally more background noise than in your home. This is due
to many acoustic differences. A number of precautions can be taken to
reduce noise. For instance, a heavy rubber mat can help reduce
reverberation through the floor. And finally, if a fitness product is placed
close to a wall, there will more reflected noise.
Q: When should I be worried about a noise?
A: As long as the sounds your Treadmill makes are no louder than a
normal conversational tone of voice, it is considered normal noise. If your
Treadmill is louder than this, you may want to call your service technician.
Sometimes an initial diagnosis can be made over the phone.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
TENSIONING THE BELT
If the running belt slips when used, use the supplied 8mm Allen wrench to
turn the left and right tension bolts clockwise 1/4-turn at a time until the belt
no longer slips.
CENTERING THE BELT
If the running belt is too far to the right side, use the supplied 8mm Allen
1
wrench to turn the right tension bolt clockwise /4-turn at a time until the
belt remains centered during use.
If the running belt is too far to the left side, turn the left tension bolt
clockwise 1/4-turn at a time until the belt remains centered during use.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
PREVENTIVE MAINTENANCE
Following are several tips on taking care of your VISION FITNESS tread-
mill. The location of your treadmill is important in maintaining your tread-
mill. Find a location that does not accumulate dust and dirt easily. A clean
environment can help to prolong the life and improve the performance of
your treadmill.
CLEANING TREADMILL
IMPORTANT: Before cleaning, be sure to turn off and unplug the treadmill.
• After each use wipe the perspiration off the console and treadmill surfaces.
• Every week clean the treadmill surfaces including the console,
motor cover and side rails using a damp cloth. Do not use solvents
as they may cause damage to the treadmill.
• Each week vacuum around and under the treadmill.
QUARTERLY INSPECTION
• Every 3 months check the tightness of the assembly bolts to assure
they are properly tightened.
• Every 3 months check the power cord.
DECK WAXING
VISION FITNESS treadmills feature low maintenance pre-waxed decks. To
maximize Treadmill life, the decks can easily have wax reapplied. You can
use the chart below as a guide to the frequency of waxing the deck.
Failure to wax the deck can result in a voided warranty. Please contact
your VISION FITNESS retailer for the appropriate wax to use.
FREQUENCY OF USE TYPE OF USE FREQUENCY OF APPLICATION
1-5 HOURS/WEEK
6-10 HOURS/WEEK
1-5 HOURS/WEEK
6-10 HOURS/WEEK
10+ HOURS/WEEK
WALKING
WALKING
RUNNING
RUNNING
RUNNING
EVERY 12 MONTHS
EVERY 6 MONTHS
EVERY 6 MONTHS
EVERY 4 MONTHS
EVERY 3 MONTHS
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED HOME USE WARRANTY
VISION FITNESS extends the following exclusive, limited warranty, which shall
apply only to the use of the device in the home, for residential,
non-commercial purposes only. Any other use of the device shall void this
warranty.
VISION FITNESS hereby extends the following limited warranties for the
following components of the device, for the time period indicated:
FRAME - LIFETIME VISION FITNESS warrants the Frame against defects in
workmanship and materials for the life of the product, so long as it remains in the
possession of the original owner.
MOTOR - TEN YEARS VISION FITNESS warrants the Motor against defects in
workmanship and materials for a period of ten years from the date of
original purchase, so long as the device remains in the possession of the
original owner.
BELT, DECK, and ROLLERS* - FIVE YEARS VISION FITNESS warrants the Belt,
Deck, and Rollers against defects in workmanship and materials for a period of
five years from the date of original purchase, so long as the device remains in the
possession of the original owner.
*ALL OTHER PARTS and ELECTRONICS - THREE YEARS
LABOR - TWO YEARS VISION FITNESS shall cover the Labor cost for the repair
of the device for a period of two years from the date of original
purchase, so long as the device remains in the possession of the original owner.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED HOME USE WARRANTY (continued)
EXCLUSIVE REMEDY
The exclusive remedy for any of the above warranties shall be repair or
replacement of defective Parts, or the supply of Labor to cure any defect,
provided that Labor shall be limited to two years. All Labor shall be supplied by
the local Retailer and the product must be located within that Retailer’s
service area. Products located outside the Retailer’s service area will not be
covered by the Labor warranty.
EXCLUSIONS AND LIMITATIONS
This warranty applies only to the original owner and is not transferable. This
warranty is expressly limited to the repair or replacement of a defective Frame,
Electronic component, or defective Part and is the sole remedy of the warranty. The
warranty does not cover normal wear and tear, improper assembly or
maintenance, or installation of parts or accessories not originally intended or
compatible with the Fitness Product as sold. The warranty does not cover failure to
follow instructions and warnings in the Owner’s Guide or failure to provide
reasonable and necessary maintenance. The warranty does not apply to
damage or failure due to accident, abuse, corrosion, discoloration of paint or
plastic, or neglect. VISION FITNESS shall not be responsible for incidental or
consequential damages. Parts and Electronic components reconditioned to As
New Condition by VISION FITNESS or its vendors may sometimes be supplied as
warranty replacement parts and constitute fulfillment of warranty terms. Any
warranty replacement parts shall be warranted for the remainder of the original
warranty term.
VISION FITNESS expressly disclaims all other warranties, express or implied,
including but not limited to all warranties of fitness for a particular purpose or of
merchantability. This warranty gives you specific legal rights and your rights may
vary from state to state.
WARRANTY REGISTRATION
Your warranty card must be completed and sent to VISION FITNESS before a
warranty claim can be processed. You may also register via our website at
www.visionfitness.com. Inside the enclosed warranty card you will find a
customer survey. Your care in completing the survey will be of value to us in
serving you in the future. Comments and suggestions are always welcome. We
are certain you will enjoy your new Treadmill. Thank you for selecting a VISION
55
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED COMMERCIAL WARRANTY
COMMERCIAL USES DEFINED VISION FITNESS warrants the T9700S and
T9700HRT model treadmills for use in non-dues paying commercial facilities.
Examples of non-dues paying commercial facilities include but are not limited to:
Hotels, Resorts, Police and Fire Stations, Apartment Complexes, Rehabilitation and
Sports Medicine Clinics, Hospitals, Elementary, Middle, and High Schools. Please
note: VISION FITNESS does not provide any warranties for the T9700S or the
T9700HRT when used in dues-paying facilities such as YMCAs and Private Health
Clubs or Colleges and Universities. For such facilities, all warranties including
implied warranties of fitness for a particular purpose and merchantability are
excluded.
FRAME - LIFETIME VISION FITNESS warrants the Frame against defects in
workmanship and materials for the lifetime of the original owner so long as the
device remains in the possession of the original owner.
ELECTRONICS, MOTORS - 3 YEARS VISION FITNESS warrants the electronic
components and the motors against defects in workmanship and materials for a
period of 3 years from the date of original purchase, so long as the device remains
in the possession of the original owner.
PARTS - 2 YEARS VISION FITNESS warrants the original parts against defects in
workmanship and materials for a period of 2 years from date of original purchase,
so long as the device remains in the possession of the original owner.
LABOR - 1 YEAR For a period of one year from date of purchase, VISION
FITNESS, through its local retailers, will provide the necessary labor for repair and
replacement of frames, electronics, motors, and parts under this warranty, so long
as the device remains in the possession of the original owner.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED COMMERCIAL WARRANTY (continued)
EXCLUSIVE REMEDY
The exclusive remedy for any of the above warranties shall be repair or
replacement of defective parts or the supply of labor to cure any defect, provided
that the labor be limited to 1 year.
EXCLUSIONS AND LIMITATIONS
This warranty applies only to the original owner and is not transferable. This
warranty is expressly limited to the repair or replacement of a defective frame,
electronic component, or defective part and is the sole remedy of the warranty.
The warranty does not cover normal wear and tear, improper assembly or
maintenance, or installation of parts or accessories not originally intended or
compatible with the product as sold. This warranty does not cover failure to follow
instructions and warnings in the Owner’s Guide or failure to provide
reasonable and necessary maintenance. This warranty does not apply to damage
or failure due to accident, abuse, corrosion, discoloration of paint or plastic or
neglect. VISION FITNESS shall not be responsible for incidental or consequential
damages. Parts and electronic components reconditioned to As New Condition
by VISION FITNESS or its vendors may sometimes be supplied as warranty
replacement parts and constitute fulfillment of warranty terms. Any warranty
replacement parts shall be warranted for the remainder of the original warranty
term.
VISION FITNESS expressly disclaims all other warranties, express or implied,
including but not limited to all warranties of fitness for a particular purpose or of
merchantability. This warranty gives you specific rights and your rights may vary
from state to state.
WARRANTY REGISTRATION
Your warranty card must be completed and sent to VISION FITNESS before a
warranty claim can be processed. You may also register via our website at
www.visionfitness.com. Inside the enclosed warranty card you will find a customer
survey. Your care in completing the survey will be of value to us in serving you in
the future. Comments and suggestions are always welcome. We are certain you
will enjoy your new treadmill. Thank you for selecting a VISION FITNESS product.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
DEVELOPING A FITNESS PROGRAM
By purchasing this piece of VISION FITNESS exercise equipment, you
have made a commitment to exercise and now have the convenience of
exercising in your own home. Your new equipment offers the flexibility to
exercise at whatever time suits you best. It will be easier to maintain a con-
sistent exercise program that will help you achieve your fitness goals.
ACHIEVING YOUR FITNESS GOALS
An important step in developing a long-term fitness program is to
determine your goals. Is your primary goal to lose weight? Improve
muscle tone? Relieve stress? Prepare for the spring racing schedule?
Knowing what your goals are will help you develop a more successful
exercise program. If possible, try to define your personal goals in precise,
measurable terms over specific periods of time. Examples of these goals
might include:
• Decrease your waistline by two inches over the next two months.
• Run the local 5K race this summer.
• Lose 10 pounds in the next three months.
• Get 30 minutes of cardiovascular exercise at least five days per week.
• Improve your race time by two minutes over the next year.
• Move from walking a mile to jogging a mile within the next three months.
The more specific the goal, the easier it will be to track your progress. If
your goals are long-term, divide them into monthly and weekly segments.
Long-term goals can lose some of the motivational benefits. Short-term
goals are easier to achieve and will allow you to see the progress you are
making. Every time you reach a goal, it is important to set a new goal.
This will lead to a healthier lifestyle and will provide the motivation that
you will need to move forward.
TRACK YOUR PROGRESS
Now that you have set your exercise goals, it is time to write them down and
make an exercise schedule that will help you achieve them. By keeping a fitness
diary, you will stay motivated and know where you are in terms of reaching your
goals. As time goes on, you will be able to look back with pride to see how
far you’ve come. See pages 64-67 at the end of this section for weekly and
annual exercise logs. Copy these logs to keep your own Fitness Diary.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
WARM-UP
A warm-up activity should be a progressive aerobic activity that utilizes the
muscles you will be using during the workout. There is no set warm-up
intensity. A typical warm-up will produce a small amount of perspiration,
but not leave you feeling fatigued. Intensity and fitness level will affect the
duration of your warm-up, but 5-10 minutes is usually recommended.
EXERCISE DURATION
A common question asked is, how much exercise do I need? We
recommend following the guidelines set up by the American College of
Sports Medicine (ACSM) for healthy aerobic activity.
• Exercise three to five days per week.
• Warm up for five to 10 minutes before aerobic activity.
• Maintain your exercise activity for 30 to 45 minutes.
• Gradually decrease the intensity of your workout, then stretch to
cool down during the last five to 10 minutes.
If weight loss is a major goal, participate in your aerobic activity at least
30 minutes for five days each week.
EXERCISE INTENSITY
The next question asked is, how hard do I need to workout? To reap the
most cardiovascular benefits from your workout, it is necessary to exercise
within a recommended intensity range. We recommend using one of two
methods to measure exercise intensity. These two methods are performed
by monitoring your exercise heart rate or by using the Rate of Perceived
Exertion (RPE). Please see pages 38 and 39 for the Target Heart Rate
Chart and RPE Scale.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
BALANCED FITNESS
While cardiovascular exercise has been the primary method of fitness for
many programs over the years, it should not be the only method. Strength
Training and Flexibility Training have become more popular as exercise
has developed. Incorporating Strength and Flexibility Training into your
current exercise program will give you the balance you need to improve
your athletic performance, reduce susceptibility to injury, increase meta-
bolic rate, increase bone density, and reach your goals faster.
STRENGTH TRAINING
Strength Training was once known as an activity performed by young
males only. That has changed with the advances in scientific research on
Strength Training over the last 20 years or so. Research has proven that,
after age 30, we begin to lose muscle mass if we do not incorporate
Strength Training into our exercise program. With this decrease in muscle
mass, our ability to burn calories decreases, our physical ability to do
work decreases and our susceptibility to injuries increases. The good news
is that, with a proper Strength Training program, we can maintain or even
build muscle as we age. A proper Strength Training program will work the
muscle groups of the upper and lower body. There are now many options
available for Strength Training including: yoga, Pilates, selectorized
machines, free weights, stability balls or medicine balls, exercise tubing
and body weight exercises, just to name a few.
Recommendations for a minimum Strength Training program include:
FREQUENCY: Two to three days per week
VOLUME: One to three sets consisting of eight to 12 repetitions.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
STRETCHING
Flexibility Training is not associated with fitness as often as cardiovascular
exercise or Strength Training, even though it is just as important. A good
stretching program will help to maintain flexibility of the hips and lower
back. A flexible person will be less likely to injure themselves in common
activities, such as reaching, twisting and turning, or in uncommon
activities such as the annual softball game.
Before stretching, take a few minutes to warm-up the muscles because
stretching a cold muscle can cause injury. Start your stretch slowly,
exhaling as you gently stretch the muscle. Try to hold each stretch 15 to
30 seconds. Don’t bounce when you stretch. Holding a stretch offers less
chance of injury. Don’t strain or push a muscle too far. If it hurts, ease up.
Here are a few stretches you can incorporate into your exercise program:
SEATED TOE TOUCH
Sit on the floor with your legs
together and straight out in front of
you. Do not lock your knees.
Extend your fingers toward your
toes, exhaling as you go. Hold for
15 to 30 seconds. Return to the
start position, and repeat as nec-
essary.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
STANDING QUADRICEPS STRETCH
Using a wall to provide balance,
grasp your left ankle with your left
hand and hold to stretch. Your
knee should be pointing toward
the floor. Hold the stretch for 15 to
30 seconds. Repeat with your
right leg, and continue to alternate
as necessary.
STANDING CALF STRETCH
Standing about three to four feet
from the wall, take one step for-
ward with your left foot. Place your
hands on the wall in front of you.
Bend your left leg slowly, using
your movement to control the
amount of stretch in the right calf.
Your right heel should remain on
the ground. Slowly bring yourself
back to the starting position and
switch legs. Repeat as necessary.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
i t a l l
s t a r t s
w i t h a
v i s i o n
500 South C.P. Avenue
Lake Mills, WI 53551
•
P.O. Box 280
toll free 1.800.335.4348
fax 1.920.648.3373
•
phone 1.920.648.4090
©2004 Vision Fitness. All Rights Reserved.
HRT is a Trademark of Vision Fitness.
8.04 Part #Z97TM52C-OM
OM18.10PRD
REV5
Download from Www.Somanuals.com. All Manuals Search And Download.
|