Original User Manual
Up-right Vacuum Cleaner
GTR1500-EU
220-240 V~; 50 / 60 Hz; 850 W; Class I; IP20
english
deutch
francais
User Manual…………………………………………….1-9
Betriebsanleitung……………………………………… xxx
Notice d’utilisation …………………………………….. xxx
nederlands Gebruiksaanwijzing……………………………………. xxx
italiano
espanol
portugues
Istruzioni sull ´uso………………………………… xxx
Instrucciones de manejo……………………………… xxx
Instruções de operação……………………………….. xxx
VIPER CLEANING EQUIPMENT CO., LTD.
Liang Bian village, Liao Bu town, Dong Guan city, Guang Dong Province, China
Company information:
WWW.vipercleaning.eu
VA50531(1) – 2009-12-01
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
USER MANUAL
INTENDED USE OF THE APPLIANCE
This dust vacuum cleaner is a cleaning appliance for commercial use, for example in hotels, schools, hospitals, factories,
shops, offices, and rental businesses.
The appliance is intended for sucking dry, non-flammable dusts of textile floorings and wall coverings.
INTRODUCTION (CAUTION: Read the instruction manual before using the appliance)
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact
VIPER in case of doubts concerning the interpretation of the instructions and for any further information.
TARGET
This Manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. VIPER will not be answerable for damages coming from
the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.
DECLARATION OF CONFORMITY
The declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.
CE-declaration is print in Quick Start Guide
IDENTIFICATION DATA
The machine model and serial number are marked on the plate .
The machine model year is written in the declaration of conformity and it is also indicated by the first two figures of the machine
serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
OTHER REFERENCE MANUALS
–
–
Service Manual (that can be consulted at VIPER Service Centers)
Spare Parts List (see www.vipercleaning.eu)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed out by qualified personnel or by VIPER Service
Centers. Only original spare parts and accessories must be used.
Contact VIPER for service or to order spare parts and accessories, specifying the machine model and serial number.
2
GTR1500-EU
VA50531(1)2009-12
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
ENGLISH
CHANGES AND IMPROVEMENTS
VIPER constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessories must be approved and performed by VIPER.
CONVENTIONS
Forward, backward, front, rear, left or right and up are intended with reference to the operator’s position, that is to say in working
position with the handle.
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.
Check that the machine is equipped with the following features:
1. Technical documents:
•
UP-RIGHT VACUUM CLEANER Quick Start Guide
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.
SYMBOLS
DANGER!
It indicates a dangerous situation with risk of death for the operator.
WARNING!
It indicates a potential risk of injury for people or damage to objects.
CAUTION!
It indicates a caution related to important or useful functions.
Pay careful attention to the paragraphs marked by this symbol.
NOTE
It indicates the necessity to refer to the User Manual before performing any procedure.
VA50531(1)2009-12
GTR1500-EU
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
USER MANUAL
GENERAL INSTRUCTIONS
Specific warnings and cautions to inform about potential damages to people and machine are shown below.
DANGER!
–
–
Always disconnect the power supply cable when the machine is not in use, before performing maintenance
procedures and before replacing parts or converting the appliance to another.
This machine must be used by properly trained and authorised personnel only. Children or disabled people cannot
use this machine.
–
–
–
Do not wear jewels when working near electrical components.
Do not work under the lifted machine without supporting it with safety stands.
Do not operate the machine near toxic, dangerous, flammable and/or explosive powders, liquids or vapours.
WARNING!
–
–
–
The machine power supply cable is grounded and the relevant plug is grounded too. In case of machine malfunction
or breakdown, grounding connection reduces the risk of electric shock.
The power supply cable plug must be connected to an appropriate outlet, which is grounded according to law in
force.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
–
–
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
–
–
–
–
Improper connection can cause electric shock. Consult a qualified technician to make sure that the outlet is properly
grounded.
Do not tamper with the power supply cable plug. If the power supply cable plug cannot be connected to the outlet,
have new grounded outlet installed by a qualified technician, according to the law in force.
Before connecting the power supply cable to the electrical mains, check that frequency and voltage, shown on the
machine serial number plate, match the electrical mains voltage.
Regularly examine the supply cable for damage, such as cracking or ageing, cuts, etc. If the damaged is found, replace
the cord before further use.
–
–
To avoid any risk, if the power supply cable is damaged, contact VIPER Service Center or a qualified technician.
Do not pull or carry the machine by the power supply cable and never use the power supply cable as a handle. Do not
close a door on the power supply cable, or pull the power supply cable around sharp edges or corners. Do not run
the machine on the power supply cable.
–
–
Keep the power supply cable away from heated surfaces.
To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is plugged in.
Disconnect the machine from the electrical mains when not in use and before performing maintenance procedures.
To avoid electric shock, do not expose the machine to rain or other bad weather conditions. Store the machine
indoors, in a dry place.
–
–
–
–
Do not allow to be used as a toy. Close attention is necessary when used near children.
Use only as shown in this Manual. Use only VIPER's recommended accessories.
Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving
parts.
–
–
–
–
–
–
–
–
Do not leave the machine unattended without being sure that it cannot move independently.
While using this machine, take care not to cause damage to people or objects.
Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.
Do not put any can containing fluids on the machine.
This appliance is not suitable for picking up hazardous dust.
This appliance is for dry use only and is not be used or stored outdoors in wet conditions.
Use extra care when cleaning on stairs.
This appliance is suitable for commercial use, for example in hotels, schools, hospitals, shops, offices, and rental
businesses.
–
The following materials should not be sucked into the vacuum cleaner:
-
-
-
hot materials (burning cigarettes, hot ashes, etc.)
liquids
flammable, explosive dusts(e.g. magnesium or aluminium dust, etc.)
–
The machine storage temperature must be between 0°C and +40°C.
–
If used on plush carpet or carpet with thick padding, do not leave machine in one place with machine turned on. When
using accessory tools, keep floor brush off carpet by keeping handle in locked position and lowering handle with one
hand to raise brush off floor. Operate accessories with other hand.
4
GTR1500-EU
VA50531(1)2009-12
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
ENGLISH
–
–
–
–
–
–
The humidity must be between 30% and 95%.
Do not use the machine as a means of transport.
Do not use the machine on slopes with a gradient exceeding the specifications.
In case of fire, use a powder fire extinguisher, not a water one.
Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.
Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep
the openings free from dust, hairs and any other foreign material which could reduce the air flow.
Do not remove or modify the plates affixed to the machine.
–
–
If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is
less than 2.5 m/s2 (98/37/EEC-EN 1033/1995).
–
–
This machine cannot be used on roads or public streets.
In case of machine malfunctions, ensure that these are not due to lack of maintenance. If necessary, request
assistance from the authorised personnel or from an authorised Service Center.
If the machine
–
•
•
•
•
•
does not work properly
is damaged
has water or foam leaks
has been left outdoors exposed to bad weather conditions
is wet or has been dropped into water
turn it off immediately and contact VIPER Service Center or a qualified technician.
If parts must be replaced, require ORIGINAL spare parts from an Authorised Dealer or Retailer.
To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this
Manual, must be performed by the authorised personnel or by an authorised Service Center.
Carefully read all the instructions before performing any maintenance/repair procedure.
Do not wash the machine with direct or pressurized water jets, or with corrosive substances.
WARNING only use the accessory provide with the appliance, The use of other non original accessory may impair
safety.
–
–
–
–
–
–
The machine must be disposed of properly, because of the presence of toxic-harmful materials (electrical components,
etc.), which are subject to standards that require disposal in special centres (see Scraping chapter).
–
–
For indoor use only.
WARNING do not allow the supply cord to come into contact with the rotating brushes
VA50531(1)2009-12
GTR1500-EU
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
USER MANUAL
MACHINE DESCRIPTION
MACHINE STRUCTURE
1. On/off switch
2. Hose
11. Handle grip
12. Cable
3. Handle assembly
4. Telescopic handle grip
5. Cover release
6. Dust bag housing
7. Cover
13. Hose hook
14. Retaining ring
15. Carrying handle
16. Cable hook
17. Dusting tool
18. Crevice tool
19. Upholstery tool
8. Foot pedal
9. Brush/suction head
10. Brush roller release
11
1
12
13
2
3
4
14
15
16
5
6
17
18
19
7
8
9
10
GTR1500-EU
6
GTR1500-EU
VA50531(1)2009-12
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
ENGLISH
TECHNICAL DATA
Model
GTR1500-EU
Voltage
220 V-240 V
850 W
Power
Current
4 A
Frequency
50/60 Hz
6L
Dust bag capacitor
Vacuum
1957 mm H2O
1900 L/Min
381 MM
3000 rpm
75 dB(A)
9,7 Kg
Flow rate
Working width
Brush speed
Sound pressure level at workstation
Weight
Length of Power cord
12 M
VA50531(1)2009-12
GTR1500-EU
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
USER MANUAL
WIRING DIAGRAM FOR GTR1500-EU
L
220-240V;
50/60Hz
N
M 1
M 2
Green/yellow
H05VV-F; 3G1,0mm²
Vacuum
M otor
8
GTR1500-EU
ENGLDISowHnload from Www.Somanuals.com. All Manuals Search And Download.
VA50531(1)2009-12
USER MANUAL
ENGLISH
SETUP OF UPRIGHT VACUUM
ADDITIONAL MACHINE SETUP
1) Ensure the paper filter bag and
exhaust filter cartridge are in the
bag housing of the machine, and
positioned in their proper places.
2) Securely replace bag housing cover
prior to operating machine.
!!! Read operators manual thoroughly prior
to operating or servicing this machine.
Carefully check the shipping carton for
signs of damage. Report any carton
damage to carrier immediately.
Check carton contents to ensure carton is
complete. Contact your Viper distributor if
anything is missing.
Contents:
Upright Vacuum assembly
Paper filter bag (inside tank)
Exhaust filter (installed inside
tank)
Handle tube with power cord
Flexible suction hose
Extendable wand
Dusting brush (installed on back
of machine)
Crevice tool (installed on back of
machine)
Upholstery tool (installed on
back of machine)
3) Place the crevice tool, dusting
brush and upholstery tool into their
holding spots on the rear of the bag
housing.
ASSEMBLY OF HANDLE & POWER CORD
1) Raise handle latch and place
handle assembly into top of bag
housing as shown in photo below.
2) Lower handle latch to lock handle
assembly in place.
MACHINE OPERATION
!!!
Read
operators
manual
thoroughly prior to operating or
servicing this machine.
!!! Do not operate machine without
filter bag or filter cartridge properly
installed.
STANDARD UPRIGHT MODE
1) Plug power cord into a grounded
outlet.
!!! Do not use an extension cord in
conjunction with the standard power
cord.
VA50531(1)2009-12
GTR1500-EU
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
USER MANUAL
2) Step on red head release lever to
lower the head to operating
position.
3) Turn power switch to “on”
position.
4) While operating machine,
periodically check the lights
located on the head of the
machine.
located on the head of the
machine.
a. Green Light = Machine is
functioning properly
b. Yellow Light = Bag is full
(machine will
automatically shut down
after :35 seconds once
bag is full)
a. Green Light = Machine is
functioning properly
c. Red Light = Check brush
assembly
b. Yellow Light = Bag is full
(machine will
6) If the Yellow Light is illuminated,
it is time to replace the filter bag
with a new one, or the pickup
hose has an obstruction.
7) If the Red Light is illuminated,
UNPLUG THE MACHINE and
check the brush for obstructions.
automatically shut down
after :35 seconds once
bag is full)
c. Red Light = Check brush
assembly
5) If the Yellow Light is illuminated,
it is time to replace the filter bag
with a new one, or the pickup
hose has an obstruction.
6) If the Red Light is illuminated,
UNPLUG THE MACHINE and
check the brush for obstructions.
MAINTENANCE
To keep the machine performing
well for many years, please follow
the
following
maintenance
VACUUMING WITH ACCESSORY
TOOLS AND WAND
procedures.
!!! Always confirm that the
machine is unplugged prior to
performing any maintenance or
repairs.
!!! While using the wand and
accessories, the brush inside the
head assembly is spinning.
!!! Though the brush is spinning,
it is elevated off the floor, so it
will not damage the carpet.
1) Check filter bag prior to use to
confirm that it is not full or
damaged. For optimal
performance, the bag should be
replaced when ¾ full, or if the
bag is damaged.
1) Plug power cord into a grounded
outlet.
2) Check exhaust filter to ensure it
is clean and properly installed.
3) Check brush assembly to ensure
that the brush bristles are not
worn out, or clogged with debris.
4) Clean outside of machine with a
mild cleaner and cloth.
!!! Do not use an extension cord
in conjunction with the standard
power cord.
2) While keeping the machine in
storage position, remove the
wand from its storage position in
the back of the housing.
5) If the supply cord is damaged, it
must be replaced by the
3) Attach the desired attachment to
the end of the wand.
4) Turn power switch to “on”
position.
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
5) While operating machine,
periodically check the lights
10
GTR1D5o0w0n-lEoaUd from Www.Somanuals.com. All Manuals Search And Download.
VA50531(1)2009-12
USER MANUAL
ENGLISH
6) Check vacuum hose for holes and
clogs. If either is found, replace
hose immediately.
7) Lubricate wheels with a water
resistant lubricant on a monthly
basis.
8) Check machine for loose or
missing nuts, screw and bolts and
replace as necessary.
POOR BRUSH PICKUP
Worn brush assembly
o Replace brush assembly
Debris caught in brush
o Remove clogged debris
Do
not
dispose
of
electrical appliances as
unsorted municipal waste,
use separate collection
facilities.
MACHINE STORAGE
1) Unplug machine from power
source
2) Store machine in upright position
in a dry area
TROUBLESHOOTING
MACHINE DOES NOT OPERATE
Bad power cord
o May need to be replaced
Bad on/off switch
o May need to be replaced
Poor wiring
o Contact Service Center
Defective vacuum motor
o Contact service center
Work carbon brushes in vacuum
motor
o Contact service center
POOR VACUUM PERFORMANCE
Filter bag is full
o Replace filter bag
Clogged hose
o Remove obstruction
Clogged extension wand
o Remove obstruction
Defective vacuum hose
o Replace hose
Loose vacuum hose connections
o Check and tighten all hose
connections
Front cover loose
o Check and secure front bag
cover housing
VA50531(1)2009-12
GTR1500-EU
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|