Viper Automobile Alarm 5902 User Manual

The company behind Viper Auto Security Systems

is Directed Electronics.

Vista, CA 92081

www.viper.com

Since its inception, Directed Electronics has had one

purpose, to provide consumers with the finest vehicle

security and car stereo products and accessories

available. The recipient of nearly 100 patents and

Innovations Awards in the field of advanced electronic

technology, Directed Electronics is ISO 9001 registered.

NO ONE DARES COME CLOSE

Quality Directed Electronics products are sold and serviced

throughout North America and around the world.

Call (800) 876-0800 for more information about our

products and services.

G5902V 2009 07

Directed Electronics is committed to delivering

world class quality products and services that

excite and delight our customers.

^M59^D02 ^L

O W N E R’ S G U I D E

Directed Electronics is an

ISO 9001 registered company.

Download from Www.Somanuals.com. All Manuals Search And Download.

Congratulations

Congratulations on the purchase of your state-of-the-art remote start

and security system. Reading this Owner’s Guide prior to using your

system will help maximize the use of your system and its many fea-

tures. For more information please visit the below website:

http://www.vipe r .com – For general and additional guide infor-

mation.

For any additional questions please contact your authorized Directed

dealer or contact Directed at 1-800-753-0600.

What you get

Welcome to the best generation of security with remote start. Your

system contains everything you need.

Responder HD remote control with Responder SST technology for

superior range and reliability

1-way Companion remote control

AC adapter for charging your remote control

Full color owner’s guide

Quick reference card

Warranty card

Warranty

Card

Quick

Reference Card

G5902V 2009-07

Download from Www.Somanuals.com. All Manuals Search And Download.

Important information

Government Regulations and Safety information

Read the Government Regulations and Warning! Safety

First sections of this manual prior to operating this system.

Warning! Failure to heed this information can result in

death, personal injury or property damage and may also

result in the illegal use of the system beyond its intended

purpose.

Your Warranty

Your Responder HD system comes with a warranty. Please make sure

you receive the warranty registration card and proof of purchase from

your dealer indicating the product was installed by an authorized

Directed dealer. Your product warranty must be validated within 10

days of purchase. You can validate it online at www.prodregiste r .

com/directed or complete and return the warranty registration card.

Quick Reference Card

Carry this card with you to reference your system’s many features.

Replacement remote controls

If additional remote controls are desired, please see your authorized

dealer or visit us at www.directedstore.com to order. Part numbers

are: 7941V for Responder HD 2-way remote control and 7652V

for the companion remote control. Your system can also be used with

optional Responder LC3 LCD 2-way remote control (7752V).

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Getting Started.................................................................................................... 4

Charging the remote control:................................................................. 4

Keys to using this manual...................................................................... 5

Remote Control Information.................................................................................. 6

Control Center..................................................................................... 7

Status Screen Icons.............................................................................................. 8

Using your System............................................................................................. 10

Commands and Confirmations ............................................................ 10

Navigation ....................................................................................... 10

Performing Commands....................................................................... 10

Fault Condition Alerts......................................................................... 11

Basic commands (function level 1) ...................................................................... 12

Arm ................................................................................................. 12

AUX/Trunk........................................................................................ 12

Disarm ............................................................................................. 13

Remote Start...................................................................................... 13

Advanced commands: Function Level 2............................................................... 14

Silent Arm......................................................................................... 14

AUX 1.............................................................................................. 14

Silent Disarm..................................................................................... 15

Runtime Reset.................................................................................... 15

Advanced commands: Function Level 3 .............................................................. 16

Sensor Bypass................................................................................... 16

AUX 2.............................................................................................. 16

Remote Valet .................................................................................... 17

Advanced Start ................................................................................. 17

Advanced commands: Function Level 4 .............................................................. 18

Silent Mode 2 ................................................................................... 18

AUX 3.............................................................................................. 18

Car finder......................................................................................... 19

Defroster........................................................................................... 19

Advanced commands: Function Level 5............................................................... 20

Car Select ........................................................................................ 20

AUX 4.............................................................................................. 20

Last Trigger ....................................................................................... 21

Temp Request .................................................................................... 21

Configuring your System.................................................................................... 22

Navigating menus and configuring features ......................................... 22

Settings Menu ................................................................................................... 24

Button Auto Lock ............................................................................... 24

Alert Types ....................................................................................... 24

Animations ....................................................................................... 24

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Beeps ..................................................................................... 25

Paging ............................................................................................ 25

Temp Units ....................................................................................... 25

Adjustments Menu............................................................................................. 26

Clock Settings .................................................................................. 26

Timer Start ........................................................................................ 26

Smart Start........................................................................................ 27

Remote Pair ...................................................................................... 28

Sensor Adjust ................................................................................... 29

Options Menu................................................................................................... 31

Power Off ........................................................................................ 31

Parking Meter .................................................................................. 31

Countdown Timer .............................................................................. 32

Name Tags ....................................................................................... 33

Demo Mode...................................................................................... 33

Level 5 Screen................................................................................... 34

Alarm Features ................................................................................................. 35

Normal Arm Protection....................................................................... 35

Sensor Silent Arm protection ............................................................... 35

Full Silent Arm Protection .................................................................... 36

Sensor Warn-away Messages ............................................................. 36

Full trigger Messages ......................................................................... 36

Emergency Override .......................................................................... 36

Trigger Zone Fault Report.................................................................... 37

Alarm Trigger Report.......................................................................... 37

Last Trigger Report............................................................................. 38

Nuisance Prevention (NPC)................................................................. 38

Remote Start Features........................................................................................ 39

Pit Stop Mode ................................................................................... 39

Key Takeover..................................................................................... 39

Remote Start Safe-lock........................................................................ 40

Disabling Remote Start ....................................................................... 40

Advanced Start ................................................................................. 40

Temperature Reporting........................................................................ 41

Remote Start Time-out Alert.................................................................. 42

Manual Transmission Start (MTS mode) ................................................ 42

Turbo Timer Mode.............................................................................. 43

Remote Start Not Available................................................................. 44

Remote and System Operations.......................................................................... 45

Passive Arming.................................................................................. 45

Auto Re-arming.................................................................................. 45

Valet Mode....................................................................................... 46

Power Save....................................................................................... 46

Rapid Resume ................................................................................... 46

Automatic Remote Updates ................................................................. 46

Download from Www.Somanuals.com. All Manuals Search And Download.

Out of Range .................................................................................... 47

No Remote Output............................................................................. 47

Feature not Available ......................................................................... 47

No Function Assigned ........................................................................ 48

1-way Companion Remote Control..................................................................... 49

Accessing Commands ........................................................................ 50

Sensor Bypass operation .................................................................... 50

Button Auto Lock................................................................................ 50

Car Select......................................................................................... 50

Programming .................................................................................... 51

Battery Information (1-Way) ................................................................ 52

System Expansion Options................................................................................. 53

Battery Information (Responder HD).................................................................... 55

Low Battery....................................................................................... 55

Battery Life........................................................................................ 56

Battery Disposal ................................................................................ 57

Glossary of Terms.............................................................................................. 58

Specifications.................................................................................................... 59

Government Regulations.................................................................................... 60

Warning! Safety First......................................................................................... 62

Installation ........................................................................................ 62

Remote Start Capable ........................................................................ 62

Manual Transmission Vehicles ............................................................. 62

Interference....................................................................................... 64

Upgrades and Batteries...................................................................... 64

Water/Heat Resistance ...................................................................... 64

Limited lifetime consumer warranty..................................................................... 65

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Your Responder HD remote is powered by an internal rechargeable

battery that can only be serviced by an authorized Directed dealer.

Due to transit and storage time prior to your purchase, the battery

charge may have depleted. To ensure proper operation, check the

battery level and connect the battery charger if not fully charged. See

Battery Information and Status Screen Icons sections for more informa-

tion about the battery.

Charging the remote control:

1. Plug the AC adapter into a 110V AC outlet. Insert the mini-USB

connector into the port on the remote control. The Status screen

Info Center then indicates the remote control is charging.

2. While the Status screen is off, the blue transmit LED will continue

blinking until fully charged (the remote control also remains

functional to command the system or access the Status screen to

check the battery level).

3. Once fully charged the remote control is ready for use. Discon-

nect the mini-USB end from the remote control ﬁrst and then the

AC adapter from the AC outlet.

Mini-USB

Port

If the battery is excessively depleted when the charger is

connected, functionality may be delayed while it charges to

the minimum voltage required to operate the display, after

which normal charging resumes.

Note

Download from Www.Somanuals.com. All Manuals Search And Download.

Keys to using this manual

Speciﬁc actions (in bold type) and style conventions are used consis-

tently throughout this manual, they are as follows:

Toggle: implies rolling the menu wheel up or down and releas-

ing.

Press: implies pushing directly inward on the menu wheel or com-

mand button and releasing.

Hold: is used after Toggle or Press actions when the menu wheel

or command button needs to be held in position for an extended

period of time, typically several seconds.

ARMED

this style denotes a still or an animation shown on the

HD display, labeled speciﬁcally with the command it identiﬁes.

Set Clock

denotes highlighted on-screen text when conﬁguring

the system or remote control.

Blue text denotes non-highlighted screen titles or on-screen text

(such as used in the conﬁguration menus).

Italicized words denote section/sub headings in this guide and

can be located through the table of contents.

An asterisk (*) when used after a word or phrase denotes that

additional details can be found in related sections usually noted

at the bottom of the page or end of the section.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Information

Internal

Antenna

Wheel

Display

Remote

Details

1-800-274-0200

RPN 7941V

IC: 1513A-7941

FCC ID:EZSDEI7941

Reset

Button

Command

Buttons

Feature

Description

Internal Antenna*

Display

Used for transmitting and receiving information

Full color display

Command buttons (4):

Used to perform arming, disarming, auxiliary channel and

remote start commands

Menu wheel

Used to access Function Level screens, control Status

Screen info center content, and navigates the remote

control and system configuration menus

Reset Button**

Mini USB Port

Resets the remote control’s microprocessor

Used for charging the internal battery (not shown)

Avoid touching or grasping the area where the internal antenna is located as it may

reduce range.

** Should the remote stop responding to button presses, insert a pin or the end of a

paper clip, and press in on the reset button for one second.

Download from Www.Somanuals.com. All Manuals Search And Download.

Control Center

Control button

Status LED

The Control Center, typically located on the upper part of the front

windshield sends and receives commands or messages to and from

your system. It consists of:

The In-vehicle system antenna, for 2 way communication.

The Status LED, as a visual indicator of the system’s status.

The Control button, for placing the system into Valet Mode* and

to perform the Emergency Override** operation.

See Remote and System Operations section for details.

See Alarm Features for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Status Screen Icons

Clock

Battery Level

Page/Alerts

Siren Status

Timer Mode/Smart Start

Remote Start Status

System Status

Sensor Status

Info Center

Name Tag

The table below describes all the Status screen icons.

Feature

Description

Clock

Indicates the time in 12 or 24 hour format

Battery level

Full

Empty

Timer Mode

/ Smart Start

Timer Mode is enabled.

Smart Start is enabled.

Remote Start

Remote start is active, the engine is running.

Manual

Transmission Start mode is enabled, the engine can be started

System Status

The system is armed, the alarm is enabled.

The system is disarmed, the alarm is disabled.

The system is Locked in Valet, the alarm is disabled.

The system is Unlocked in Valet, the alarm is disabled.

Second system operation: If set to control a second system, the

above lock icons will contain a “2”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Feature

Description

Name Tag

Info Center

Displays a personalized name tag 1-15 characters long

Displays the Remote Start runtime, Temperature Auto-report, Parking

meter and Countdown timers. While Status screen is on, press the

menu wheel to change the displayed information.

Sensor Status

Trigger Zones are enabled and functioning normally.

Trigger zone fault found when arming and is bypassed.

NPC On, a sensor has triggered excessively and is bypassed

Remote Sensor bypass On, the bypassed sensor will not

trigger the alarm.

Siren Status

Page/Alerts

Siren is enabled and will sound for all alarm outputs.

Siren is disabled for sensor triggers, remote is paged for all

triggers (Sensor Silent Arm).

Siren is disabled for all triggers, remote is paged for all trig-

gers (Full Silent Arm).

Pager On,

Pager Off.

Battery Save On (Red dot), Battery Save Off (No dot).

Tone On (icon is not present when Tone is Off).

Vibrate On (icon is not present when Vibrate is Off).

Example

Page Off, Vibrate On & Tone On.

Varying combinations of these icons reflect the Paging and Alert

Types menu settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using your System

Commands and Conﬁrmations

Commands, Basic or Advanced, are used to activate system features

and are performed by pressing one of the Command buttons. Basic

commands control the most often used security and remote start fea-

tures while Advanced commands control more specialized features

and request reports.

Conﬁrmations for Basic or Advanced commands are indicated

ﬁrst by siren chirps and vehicle light ﬂashes, and then as animations,

still screens and beeps or tones on the remote control. A description

of each feature conﬁrmation is found in the following Basic command

and Advanced command sections.

Navigation

To navigate to the Status and Function level screens, toggle the menu

wheel up or down, the screens will cycle as shown in the facing dia-

gram. These screens remain displayed for 3 seconds before reverting

to a blank screen. To display a screen for an extended 20 second

period; toggle and hold the menu wheel on the desired screen for this

duration, after which the display reverts to a blank screen.

Performing Commands

Perform Basic commands by pressing one of the command buttons

while the remote control display is blank or the Status screen is On.

Perform Advanced commands by pressing one of the command but-

tons while a Function Level screen is displayed.

Advanced command example: Silent Arm

1. Toggle the menu wheel to display the Function Level 2 screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Press the

button while this screen is still on to perform the

Silent Arm command.

3. The Responder HD remote will play the

followed by the Status screen.

SILENT ARM

animation

Status Screen

Blank

Display

Toggle

Menu Wheel

Up or Down

Command

Buttons

Fault Condition Alerts

If, when performing a command, a condition exists that does not al-

low the activation of a feature, a fault screen and tone plays as an

alert. For more details on the condition and possible resolutions, use

the fault screen title and locate the respective section through the table

of contents.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic commands (function level 1)

Arm

Press and release

The alarm arms, doors lock (if connected), and the siren chirps and

ARMED

lights ﬂash once. The

animation and beeps play to conﬁrm. If

anima-

Valet mode* is On the doors lock and the

tion and tone play. Exit Valet mode to arm the alarm normally.

LOCKED (IN VALET)

If a trigger zone fault is detected the siren chirps once again and the

Trigger Zone Fault report** plays.

To Arm and Panic

Press and hold

The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds

PANIC

the siren and ﬂashes the lights. The

tones play to conﬁrm. Press the

put.

animation and siren

button to stop the out-

AUX/Trunk

Press and hold

AUX

The Trunk opens (if connected) when this button is pressed for 2 sec-

TRUNK RELEASE

onds. The

animation and tones play to conﬁrm.

See Remote and System Operations section for details.

See Alarm Features for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disarm

Press and release

The alarm disarms, doors unlock (if connected), and the siren chirps

DISARM

and lights ﬂash twice. The

animation and beeps play to con-

UNLOCK (IN VALET)

ﬁrm. If Valet mode* is On the doors unlock and the

animation and tone play.

More than 2 siren chirps and remote beeps indicates a trigger has

occurred. The Disarm animation is then replaced by the Alarm Trigger

report.**

Remote Start

Press and release

Activates (or if On, deactivates) the remote starter. The engine and lights

REMOTE START ACTIVATED

turn On and the

animation and On tones play,

REMOTE START DEACTIVATED

or the engine and lights turn Off and the

animation and Off tones play to conﬁrm. The Remote Start status icons

in the Status screen are updated accordingly. If Remote Start fails to

activate, a fault screen and tone plays to identify the reason.***

***

See Remote and System Operations for details.

See Alarm Features for details.

See Remote Start Not Available (Remote Start Features).

For Manual transmission vehicles see the Manual Transmission Start sec-

tion under Remote Start Features for more details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced commands: Function Level 2

From blank screen, toggle menu wheel down 2 times

Silent Arm

Press and release

The alarm arms, doors lock (if connected), and the lights ﬂash once.

SILENT ARM

The

animation plays to conﬁrm. Valet mode* or Trigger

Zone Fault report** messages may be received.

AUX 1

Press and release

AUX

AUX CHANNEL

Activates (or if On, deactivates) the Aux 1 output. The

animation and On tones or Off tones play to conﬁrm.

See Remote and System Operations section for details.

See Alarm Features for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Silent Disarm

Press and release

The alarm disarms, doors unlock (if connected), and the lights ﬂash

SILENT DISARM

twice. The

animation plays to conﬁrm. The Alarm Trig-

ger report* may replace the Silent Disarm animation.

Runtime Reset

Press and release

If more time is needed while remote start is active, runtime reset

will reset the runtime counter to the pre-programmed setting. The

RUNTIME RESET

animation and tones play to conﬁrm. The Remote

Start runtime is reset in the Status screen.

Remote Start must be active to use this feature.

Note

See Alarm Features for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced commands: Function Level 3

From blank screen, toggle menu wheel down 3 times

Sensor Bypass

Press and release

to access menu

The Sensor Bypass menu screen has four options, pressing the appro-

priate button as shown below activates that bypass level. An appropri-

ate screen and beeps play to conﬁrm.

Warn away

Press and release

: all sensor warn-away

output and messages to the remote are defeated.

AUX

Optional sensors

Press and release

: optional sensor

warn-away and full trigger output and messages to the remote

are defeated.

Shock sensor

Press and release

: shock sensor warn-

away and full trigger output and messages to the remote are

defeated.

Bypass all

Press and release

: shock and optional sensor

warn-away and full trigger output and messages to the remote

are defeated.

System needs to be armed to perform Sensor Bypass.

Perform arm command any time to turn Sensor Bypass Off.

Note

AUX 2

Press and release

AUX

AUX CHANNEL

Activates (or if On, deactivates) the Aux 2 output. The

animation and On tones or Off tones play to conﬁrm.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Valet

Press and release

VALET MODE ENTER

Enters (or if On, exits) Valet Mode. The

EXIT VALET MODE

animation and beeps play to conﬁrm. See Valet

Mode for more details

Advanced Start*

Press and release

Displays the Advanced Start menu screen with two options:

Timer Mode

Press and release

Activates (or if On, deactivates) Timer Mode. The lights ﬂash

quickly four times for On and slowly four times for Off. The

TIMER MODE ACTIVATED

TIMER MODE DEACTIVATED

animation

and beeps play to conﬁrm.

Smart Start

Press and release

Activates (or if On, deactivates) Smart Start. The lights ﬂash

quickly ﬁve times for On and slowly ﬁve times for Off. The

SMART START ACTIVATED

SMART START DEACTIVATED

and beeps play to conﬁrm.

animation

Advanced Start will not start the engine unless the system

has been Armed or Locked In Valet.

Note

* See Remote Start Features for more details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced commands: Function Level 4

From blank screen, toggle menu wheel down 4 times

Silent Mode 2

Press and release

Displays Silent mode 2 menu screen with two options:

Sensor Silent*

Press and release

The alarm arms, doors lock, and the siren chirps and lights ﬂash

SENSOR SILENT MODE

3 times. The

conﬁrm.

screen and beeps play to

Full Silent*

Press and release

The alarm arms, doors lock, and the siren chirps and lights ﬂash

FULL SILENT MODE

4 times. The

ﬁrm.

screen and beeps play to con-

AUX 3

Press and release

AUX

AUX CHANNEL

Activates (or if On, deactivates) the Aux 3 output. The

animation and On tones or Off tones play to conﬁrm.

* See Alarm Features for more details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Car ﬁnder

Press and release

The siren emits one long chirp and the lights ﬂash for 10 seconds. The

CAR FINDER

animation and beeps play to conﬁrm. The light ﬂashes

stop if armed or disarmed while Car Finder is in progress.

Defroster*

Press and release

Activates the vehicle Defroster circuit (if connected) while Remote Start

DEFROSTER ON

is activated. The

screen and beeps play to conﬁrm.

For convenience, the Defroster circuit will also automatically activate

10 seconds after remote starting if the temperature is below 55°F.

Remote Start must be active to use this feature.

Note

* This feature must be installed and turned on by an authorized Directed

dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced commands: Function Level 5

From blank screen, toggle menu wheel down 5 times

Car Select

Press and release

Sends a request message to the selected car which, if within range,

CAR 1

CAR 2

responds with its status information. The

screen and

beeps play to conﬁrm the change followed by the updated Status

screen.

Car 2 must have a Name Tag set in the Options menu before it can

be selected. If the selected car does not respond the remote displays

CAR 1 NOT AVAILABLE

the

screen (or car 2 if applicable) and remains

in the newly selected car mode.

AUX 4

Press and release

AUX

AUX CHANNEL

Activates (or if On, deactivates) the Aux 4 output. The

screen and On tones or Off tones play to conﬁrm.

Download from Www.Somanuals.com. All Manuals Search And Download.

Last Trigger*

Press and release

Requests a report of the most recent alarm triggers for display on the

remote. The last trigger report clears when the ignition is turned on.

Temp Request

Press and release

Requests the vehicle’s interior temperature and temporarily displays it

in the status screen info center.

* See Alarm Features for more details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Conﬁguring your System

You can customize the way the HD remote communicates information

and adjust a variety of system features in the Settings, Adjustments and

Options conﬁguration menus. The following features are listed and

deﬁned in the same sequential order as they appear on your system.

Button Auto Lock Clock Settings

Power Off

No features, used

only to exit menus

Alert Types

Animations

Button Beeps

Paging

Timer Start

Parking Meter

Countdown Timer

Name Tags

Demo Mode

Level 5 screen

Smart Start

Remote Pair

Sensor Adjust

Temp Units

Navigating menus and conﬁguring features

Conﬁguring your system is performed via the menu wheel and com-

mand buttons.

Toggle Up

Wheel

Press in

to Enter

Toggle Down

Download from Www.Somanuals.com. All Manuals Search And Download.

The following instructions discuss how to access and conﬁgure the

many features available, allowing you to customize your HD remote

control to your personal preferences.

To access the main menu screens (from a blank display):

1. Press and hold the menu wheel for 3 seconds, the remote control

enters the main menu and displays the Settings screen.

2. Toggle the menu wheel to scroll through the Settings, Options,

Adjustments and Exit main menu screens.

3. Press the menu wheel to enter a displayed main menu.

4. Toggle the menu wheel to highlight a menu item.

5. Press the menu wheel to access the menu item screen.

Making selections, go back and exit:

6. Toggle the menu wheel to move the highlight to the desired con-

ﬁguration and then press to set. The selected conﬁguration is

indicated by the pointer on the right. Continue to hold the menu

wheel to return to normal operation or release to remain within

Back

the menu. Highlight

and press to return to the previous

menu or continue holding to return to normal operation.

Adjust timers and features

7. When adjustment screens are accessed, the current settings are

displayed. Toggle the menu wheel to highlight a settings ﬁeld

and then press it to adjust the setting. Follow the on-screen in-

structions or the description in each feature section to adjust the

feature settings.

Menus are automatically exited after a 30 second lapse in button

activity.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings Menu

Button Auto Lock

Options: ON, OFF (default)

When ON, the remote buttons lock after a 20 second lapse be-

tween button presses to prevent unintentional operations. If a button

BUTTON LOCK ON

is pressed when locked the

and fault tone play.

When OFF, the buttons do not lock and always perform a command

when pressed.

To unlock the buttons; press the

button followed by the

button, the Status screen and unlock tones play to conﬁrm.

Auto unlocking: After turning the ignition off, a message to the remote

unlocks the buttons until the next command is performed. If Auto Un-

locking is not desired, it can be turned off by an authorized Directed

Dealer.

Alert Types

Options: Tone (default), Tone+Vibrate, Vibrate, Screen Only

There are several ways for the HD to alert you when it has received a

message from the system. Select Tone to be alerted by tones that are

unique for each message. Select Vibrate and the HD silently alerts you

with a gentle vibration. Select Tone+Vibrate to be alerted by both, or

select Screen Only when you don’t want to be interrupted.

Animations

Options: Play All (default), Triggers Only

Download from Www.Somanuals.com. All Manuals Search And Download.

Select Play All and all available animations and still screens play

when a message is received from the system. Select Triggers Only and

the animations are only played if a message indicating the security

system has triggered and the siren is sounding. Screen stills are active

for features in this selection.

Button Beeps

Options: ON (default), OFF

When Button Beeps are ON you hear a beep each time you press

a button. These beeps can be turned OFF if you prefer silent button

presses.

Paging

Options: Battery Save (default), ON, OFF

Paging is how the HD remote monitors your system’s messages. Bat-

tery Save extends battery life by turning Paging Off after 72 hours if

the remote control is not used during this period. Just press any button

to resume system monitoring. When ON it wakes up every few sec-

onds to listen for pages from the system. When OFF it does not wake

up to receive remote start or alarm trigger pages.

When off, responses are still received when a command

is performed.

Note

Temp Units

Options: Fahrenheit (default), Celsius

Temperature can be displayed in your choice of temperature scales.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjustments Menu

Clock Settings

Options: Set Clock, Time Format

Used to adjust the clock and set the Status screen time format.

Setting the clock

Clock Settings

1. Toggle to

and press the menu wheel, the Clock

Settings screen is displayed.

2. Press the menu wheel to enter the Set Clock ﬁeld, or toggle to

Time Format to select a 12 Hour or 24 Hour display and press

the menu wheel on your highlighted choice to set (a pointer to the

right indicates your selection).

3. In the Set Clock ﬁeld, to adjust and save a new clock setting,

follow the on-screen instructions.

Menu wheel: Press the menu wheel to highlight the charac-

ter to be adjusted. Toggle to adjust up/down.

: Press to highlight the character to be adjusted.

AUX

: Press to reset the clock.

: Press to save new settings and go back to the Clock

Settings screen.

Timer Start*

Options: How Many? (Starts), How Often? (Hours)

The Timer Start adjustment screens are used to set how many times (1

- 24 starts) and how often (every 1-24 hours) the Timer Mode feature

starts the engine, when enabled.

Before beginning adjustment the system must be in commu-

nication range of the remote and in the disarmed state.

Note

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Timer Start

1. Disarm the system then access the Adjustments feature menu.

Timer Start

2. Toggle to

and press the menu wheel, the Timer

Start screen with current setting is displayed. If the system is not

NO FUNCTION ASSIGNED

ready the

screen and tone plays. Return

to Step 1.

3. Press the menu wheel to enter the

How Many? (Starts)

ﬁeld or

toggle and press to enter the How Often? (Hours) ﬁeld.

4. To adjust and save new settings follow the on-screen instruction.

Menu Wheel: toggle to adjust the setting up/down.

or : Press to adjust the setting up/down.

AUX

: Press to reset the setting to default.

: Press to delete new settings and go back to the Adjust-

ment feature menu.

* See Advanced Start under Remote Start Features for more details.

Smart Start*

Options: Low Temp Start, High Temp Start

The Smart Start adjustment screens are used to set the low temperature

and high temperature thresholds the Smart Start feature uses to start the

engine, when enabled.

Before beginning adjustment the system must be in commu-

nication range of the remote and in the disarmed state.

Note

Setting the Low and High Temperature thresholds:

1. Disarm the system then access the Adjustments feature menu.

Smart Start

2. Toggle to

and press the menu wheel, the Smart

Start screen with current setting is displayed. If the system is not

Download from Www.Somanuals.com. All Manuals Search And Download.

NO FUNCTION ASSIGNED

ready the

to Step 1.

screen and tone plays, return

Low Temp Start

3. Press the menu wheel to enter the

ﬁeld or

toggle and press to enter the High Temp Start ﬁeld.

4. To adjust and save new settings follow the on-screen instruc-

tions.

Menu Wheel: Toggle to adjust the setting up/down. Press

to save new settings and go back to the Adjustments feature

menu.

: Press to adjust the setting up/down.

AUX

: Press to reset the setting to default.

: Press to delete new settings and go back to the Adjust-

ment feature menu.

* See Remote Start Features for more details.

Adjusting Battery Level:

The battery level threshold for the Smart Start feature is preset to

On-10.5 volts; your authorized Directed dealer can adjust this setting

within the 9 to 12 volt range or to Off.

Remote Pair

Remote Pair is a process where the Responder HD and the system in

the vehicle learn each others encrypted identiﬁcation, securing their

communication from intruders. Please note that your remote controls

come pre-programmed from the factory.

How to Remote Pair

Make sure the remote control is set for the desired Car 1 or Car 2

operation for the system it is to be paired with.

Download from Www.Somanuals.com. All Manuals Search And Download.

Placing the system into the remote pair mode

1. Open one or more of the vehicle doors.

2. Turn the ignition to the On position.

3. Press, release, then press and hold the Control button (on Con-

trol Center).

4. The control center LED begins to ﬂash and the siren emits one

chirp to conﬁrm the system is in Pair mode, the Control button

can be released. The system will stay in Pair mode for 60

seconds or until the doors are closed or ignition turned off.

The siren will emit one short and one long chirp when it exits

remote pair mode.

1. Toggle to

and press the menu wheel, the Remote

Remote Pair

Pair screen with on-screen instructions is displayed.

2. Press and hold the

button. The remote’s LED ﬂashes, then

the siren chirps, and remote tones play to conﬁrm pairing. The

PAIRING SUCCESSFUL

screen is displayed before returning to the

Adjustments feature menu screen.

3. If the remote does not learn the system ID it displays the

PAIRING FAILED

screen after the button is released before re-

turning to the Remote Pair screen. Press and hold the

button to try again. If the siren chirps but remote tones are not

played, Press and hold the

button to try again until the

tones are played. If the siren does not chirp shortly after the

remote LED begins ﬂashing make sure the system is in remote

pair mode.

Sensor Adjust

Your Responder HD security with remote start system has a built in

shock sensor used to detect intrusion attempts on your vehicle. The

sensor sensitivity can be adjusted to optimize your vehicle’s detection

Download from Www.Somanuals.com. All Manuals Search And Download.

levels without generating false alarms.

If you feel your security system shock sensor is too sensitive or not

sensitive enough, it is highly recommended that you contact your au-

thorized Directed dealer/professional and have the sensor adjusted

for optimized security detection performance.

Download from Www.Somanuals.com. All Manuals Search And Download.

Options Menu

Power Off

Options: Power Off

Power Off

With

highlighted, press the menu wheel, the

POWER OFF

animation and tones play to conﬁrm. When an ex-

tended period of non-use is anticipated turning the power off will

preserve the battery charge.

To turn the remote on, Press and hold the menu wheel for 3 sec-

VIPER

onds, the

animation and On tones play to conﬁrm the remote

control is ready for normal operation. The remote also turns itself on

and begins charging when the battery charger is connected.

Parking Meter

Options: Start Meter, Parking Meter Set

The Parking Meter tracks and alerts you to the time remaining when

parked in a metered parking spot. As the metered time runs out the re-

motecontrolemitsalertsat15minutesremaining(1beep)and5minutes

PARKING METER TIMER EXPIRED

remaining (2 beeps). At expiration the

animation and 4 beeps are played followed by an alert output of 2

beeps each minute for 10 minutes. The next button press replays the

animation and stops the alert output, a command is not performed.

Starting and Setting the Parking Meter

Parking Meter

1. Toggle to

and press the menu wheel, the Parking

Meter screen with current setting is displayed.

Start Meter

2. With

highlighted, press the menu wheel to start

the meter or toggle the Menu Wheel to enter the Parking Meter

Set ﬁeld.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. To adjust and save a new meter setting follow the on-screen in-

structions.

Menu wheel: Press to highlight the digit to be adjusted.

Toggle to adjust the setting up/down.

: Press to highlight the digit to be adjusted.

AUX

: Press to reset the meter.

: Press to save new setting and go back to the Parking

Meter screen.

To Stop, Start and Clear the Parking Meter time (in the Info Center):

With the Status screen displayed, press and hold the menu

wheel for 3 seconds, the colon in the timer meter stops

blinking and 2 beeps are emitted to conﬁrm the meter has

stopped. The meter remains in the display.

Press and hold again for 3 seconds to restart the meter (the

timer meter colon begins blinking again).

Press and hold for 6 seconds any time, the timer will clear

from the display.

Countdown Timer

Options: Start Timer, Countdown Timer Set

Your Responder HD remote control has a feature for setting a count-

down timer designed to be used as a reminder only. At expiration the

COUNTDOWN TIMER EXPIRED

animation and 4 beeps play followed by

an alert output of 2 beeps every minute for 10 minutes.

Setting, Stopping, Starting and Clearing of the Countdown timer and

alert uses the same process as previously described for the Parking

Meter.

Download from Www.Somanuals.com. All Manuals Search And Download.

Name Tags

Options: Set Name Tag1, Set Name Tag2

Name tags allow you to personalize your Responder HD remote con-

trol by adding a unique name to the Status screen for the system it

controls. For Name Tag1; Remote 1 is the default setting. Name Tag2

is used when your Responder HD remote control is used to control

a companion system in another vehicle. For more details on Name

Tag2, please contact your authorized Directed dealer.

Setting the Name Tags

Name Tags

1. Toggle to

played.

and press the Name Tags screen is dis-

Set Name Tag1

Set Name Tag2

2. Toggle to

and press the

menu wheel to enter the ﬁeld.

3. To set and save a name tag follow the on-screen instructions.

Menu wheel: Toggle the menu wheel up/down to adjust the

highlighted character. Press to move the highlight to the next

character on the right.

: Press to highlight the character to be changed.

AUX

: Press to delete all characters.

: Press to save the name tag and go back to the Name

Tags screen.

Demo Mode

Options: Demo Once, Demo Once muted, Demo loop, Demo loop

muted

Demo Mode plays a pre-selected group of animations as a demon-

stration tool to show friends or family. Running it shortens the battery

life over time if used excessively. Please note that the accelerated

Download from Www.Somanuals.com. All Manuals Search And Download.

battery depletion caused by this using this feature can result in a dead

battery. Use sparingly to maintain battery life.

Demo Once plays the animations once with tones and beeps;

Demo Once Muted plays animations only.

Demo Loop plays the animations continuously with tones and

beeps; Demo Loop Muted plays animations only.

The supplied battery charger must be connected to your

Responder HD remote control for Demo Loop or Demo Loop

Muted to operate.

Note

Level 5 Screen

Options: Aux 4 (default), Garage

This feature allows you to choose the Function level 5 screen ac-

cording to your system’s conﬁguration. Aux 4 is for normal use as an

auxiliary channel output. Garage is for use as an optional garage

door opener. For more details on these settings, please contact your

authorized Directed Dealer or call 1- 800 - 753-0600.

Download from Www.Somanuals.com. All Manuals Search And Download.

Alarm Features

Normal Arm Protection

Status LED: The Control Center Status LED ﬂashes as a visual indicator

that your vehicle’s security system is active.

Starter Kill: The Failsafe starter kill relay prevents the engine from

starting

May require additional parts and installation

Note

Sensor triggers: The onboard shock sensor can distinguish minor im-

pacts from major impacts to the vehicle exterior. Minor impacts causes

the system to emit a Warn-away output by chirping the siren and

ﬂashing the parking lights for 3 seconds. Major impacts caused for

example by a forcible entry attempt, results in a Full Trigger output. The

siren sounds and the lights ﬂash for 30 seconds or longer. Both Warn-

away and Full Triggers send a message to the remote control.

Point of entry triggers: Opening the Hood or Trunk causes a Full Trig-

ger output, while opening a Door or turning on the Ignition causes the

the siren to chirp 3 seconds before beginning the Full Trigger output.

This 3 second delay allows time to disarm and silence the siren in

case of accidental trigger. The Full Trigger message is still sent to the

remote.

Sensor Silent Arm protection

Sensor warn-away and Sensor full trigger activations only send mes-

sages to the remote, while the vehicle’s light ﬂash and siren outputs

are defeated. Point of entry triggers will activate the light ﬂash, siren,

and send messages normally.

Download from Www.Somanuals.com. All Manuals Search And Download.

Full Silent Arm Protection

Sensor warn-away, Sensor full trigger and Point of entry activations

will only send messages to the remote, with vehicle light ﬂash and

siren outputs defeated.

Sensor Warn-away Messages

When the remote receives a Sensor Warn-away message it emits 10

WARN AWAY

beeps (if on) and plays a sensor zone speciﬁc

anima-

tion once. Warn-away messages cannot be reviewed or displayed

in reports.

Full trigger Messages

A Full Trigger message generates a Full Trigger output of siren tones

TRIGGER

and zone speciﬁc

animation for 15 seconds followed by an

alert that consists of 2 beeps per minute for 10 minutes.

To stop the output and alert, press a command button to perform a

command, or toggle the menu wheel. If the output is not stopped, the

next press or toggle of the remote control buttons or wheel replays

TRIGGER

the zone speciﬁc

normal operation.

animation for review before returning to

Emergency Override

The following procedure disarms the system when a programmed re-

mote is not available. Number of presses__________

1. Turn the ignition On.

2. Press the control button on the Control Center the correct

number of times (the default is 1 press).

3. After a few seconds the siren output ceases and the system

is disarmed.

Download from Www.Somanuals.com. All Manuals Search And Download.

As a precaution, if programmed for Passive Arming or Auto

re-arming the system should be placed into Valet Mode until

a remote is available .

Note

Trigger Zone Fault Report

When armed by remote command the system runs a status check

of the alarm trigger zones. Faulty zones (usually caused by dome

light delay or open trunk) are bypassed and reported via the control

center LED and remote, while all other trigger zones remain active

and are monitored to protect the vehicle. Should a faulty zone self

correct (dome light turns off) it becomes active and is then monitored

normally.

The siren chirps once again a few seconds following the arming chirps

as an audible alert, the control center LED ﬂashes in groups to indicate

the zone number. The remote emits a fault tone, displays a screen for

each faulty zone, and then updates the Sensor status icon in the Status

screen. Press any button within 20 seconds of the fault tone to review

the report without performing a command.

Alarm Trigger Report

The most recent alarm triggers (if any) are reported when the

alarm is disarmed via the remote control, siren chirps, parking light

and control center LED ﬂashes. The siren chirps 4 times (or 5 times if

NPC On*), the lights ﬂash 3 times, and the control center LED ﬂashes

in groups to indicate the last two zones that were triggered (see Table

of Zones). The remote control Disarm output is replaced by screens

and beeps that identify the two most recent triggers.

* See Nuisance Prevention (NPC) following this for more details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Zones

Zone Name

Zone # (led flashes)

Trunk

Shock Sensor

Door

Optional Sensor

Ignition

Hood

Last Trigger Report

The Last Trigger report displays the two most recent alarm triggers

depending on the system state when requested. When disarmed, the

report will display screens for the two most recent Alarm Zone triggers

since the vehicle was last driven. When armed, the report will display

screens for two most recent Alarm Zone triggers since the system was

armed.

The last trigger report clears when ignition is turned on.

Note

Nuisance Prevention (NPC)

NPC monitors all alarm zones and, if any are triggered excessively,

bypasses them until corrected. If a point of entry (trunk, hood, door)

is left open following a forced entry, it is bypassed. It becomes active

again only after being closed.

Sensors that trigger excessively are bypassed and reported to the

remote via Sensor Status icon in the Status Screen, and by NPC On

screens that are displayed during the Disarm Trigger and Last Trigger

reports.

Bypassed sensors automatically reset after one hour and after the

vehicle is driven. Disarming then re-arming the alarm does not reset

bypassed sensors.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Start Features

Pit Stop Mode

To exit vehicle with engine running

The system keeps the engine running during short trips into the house

or convenience store. To perform Pit Stop:

1. With the engine running, set the parking brake and release the

foot brake.

2. Press the

will play the

button, the vehicle lights will turn on and the remote

REMOTE START ACTIVATED

message.

3. Turn the key to off, and remove it from the ignition, the engine

continues running for the programmed runtime.

4. Exit the vehicle and arm the alarm.

For Pit Stop on manual transmission vehicles, follow the di-

rections in the Manual Transmission Start (MTS mode) sec-

tion found further into Remote Start Features.

Note

Key Takeover

When you are ready to drive

The system keeps the engine running until the vehicle is ready to be

driven. To perform Driver Takeover:

1. Disarm the system and enter the vehicle, do not step on the foot

brake.

2. Insert the key, turn it to the run position, and then step on the foot

brake, the remote start then turns off.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. The vehicle lights turn off to indicate remote start is off, and then

REMOTE START DEACTIVATED

after a few seconds the remote plays the

message.

4. The vehicle is ready to drive.

Remote Start Safe-lock

Remote start safe-lock makes sure the doors are locked when Remote

Start is activated and after it is deactivated, even if they are unlocked

when remote start is activated. Door locks may require additional

parts and labor.

Disabling Remote Start

Remote start can be disabled by moving the Toggle Switch to the Off

position. If remote start is attempted while Off, the engine will not

start and a message will let you know the switch is Off. (See Remote

start not available) move the switch back to the On position to resume

normal operation.

Toggle Switch location:

Advanced Start

The Advanced start Timer Mode and Smart Start features automati-

cally start the engine as set in the Adjustments menu.

Precautions for the Advanced Start features:

Park the vehicle in a well ventilated area away from windows

and doors that lead into inhabited spaces.

Arm and Lock the vehicle, the engine will not start unless the

doors are locked.

Only one Advanced start feature can be enabled at any given

time.

For manual transmission vehicles MTS mode must be enabled

Download from Www.Somanuals.com. All Manuals Search And Download.

before Advanced start can be activated.

Timer Mode operation

Activation begins a countdown timer as set in the How Often? (Hours)

screen of the Adjustments menu (default 3 hours). When the timer

REMOTE START ACTIVATED

expires the engine starts and the

message is

sent to the remote control. When the Remote start runtime expires the

REMOTE START DEACTIVATED

engine shuts off, the

message is sent to the

remote control and the countdown timer restarts. This will repeat as

many times as set in the How Many? (Starts) screen of the Adjustments

menu (default 6 starts). Timer Start is exited after the ﬁnal start.

Smart Start operation

Smart Start uses the “Hours” and “Starts” settings used in Timer Mode

in addition to temperature to automatically start the engine. Activation

begins the countdown timer. When the timer expires the vehicle inte-

rior temperature is checked and, if it exceeds the temperature thresh-

olds as set in the Low Temp and High Temp screens of the Adjustments

REMOTE START ACTIVATED

menu, the engine starts and the

message is

sent to the remote control. When the Remote start runtime expires the

REMOTE START DEACTIVATED

engine shuts off, the

message is sent to the

remote control and the countdown timer restarts. Smart Start is exited

after the ﬁnal start.

The vehicle battery voltage is also monitored and if below

10.5 volts the engine will start. The battery threshold can

be changed by an authorized Directed dealer if a higher or

lower threshold is desired.

Note

Temperature Reporting

During Remote start the vehicle interior is checked regularly for tem-

Download from Www.Somanuals.com. All Manuals Search And Download.

perature changes. If a change in temperature is detected this report

will be sent to the remote for display. Each time the remote receives

this report it will beep, update, and display the newest temperature

information in the Status screen info center.

Temperature report must be turned on by an authorized Di-

rected dealer.

Note

Remote Start Time-out Alert

During remote start a message is sent three minutes before

and again at one minute before the engine turns off. The

REMOTE START TIMEOUT IMMINENT

animation and tones play as an alert

to reset the runtime if desired.

Manual Transmission Start (MTS mode)

When installed into a manual transmission vehicle, the system requires

that the MTS mode is properly set when parking. If MTS mode is not

properly set or is defeated after being properly set the system will

REMOTE START NOT AVAILABLE

not start the engine and the

tones play as an alert.

screen and

1. With the engine running, set the parking brake and leave the

engine running. For Pit Stop or Turbo Timer mode (to leave the

engine running after arming) open the driver door.

2. Release the foot brake (if pressed during Step 1), or press and

release the foot brake anytime. As long as the engine is running

there is no time limit to perform this step.

3. Within 20 seconds of foot brake release, press any command

button on the remote, after 20 seconds return to Step 2 (For Turbo

Timer Mode, press the optional dash mounted activation button

or send the Timer Mode command from the Advanced Start menu

Download from Www.Somanuals.com. All Manuals Search And Download.

screen).

4. The vehicle lights ﬂash 5 times to conﬁrm MTS mode en-

able and the remote start activates the ignition outputs. The

REMOTE START ACTIVATED

animation and beeps play to conﬁrm.

5. Turn Off and remove the key from the ignition switch, the engine

remains running.

6. Exit the vehicle, close all the doors and arm the system.

7. The engine turns off and after

few seconds, the

REMOTE START DEACTIVATED

message plays to conﬁrm. If the door is

opened in Step 3 then the engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and

can be activated by remote control or optional dash mounted activa-

tion button.

1. With the engine running, set the parking brake.

2. Within 20 seconds, press the optional dash mounted activation

button or send the Timer Mode command from the Advanced

Start menu screen.

3. The vehicle lights turn on and the remote start activates the igni-

REMOTE START ACTIVATED

tion outputs. The

play to conﬁrm.

animation and beeps

4. Turn Off and remove the key from the ignition switch, the engine

remains running.

5. Exit the vehicle, close all the doors and arm the system.

6. The engine runs for the Turbo Mode runtime.

Turbo Timer must be turned on by an authorized Directed

dealer.

Note

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Start Not Available

For user safety, the system must be properly conﬁgured or remote start

will not activate. Refer to the table below for the screens and parking

light ﬂashes that will identify the conﬁguration issue and resolution.

Fault Message

Flashes *

Solution

Release foot brake

BRAKE ON

Close hood

HOOD OPEN

REMOTE START NOT AVAILABLE

If displayed after a Remote Start com-

mand:

MTS mode isn’t enabled

Enable MTS mode

If displayed after an Advanced Start

command it may be one of the fol-

lowing:

MTS mode isn’t enabled

Brake is on

Enable MTS mode

Release foot brake

Close hood

Hood is open

Toggle switch set

Alarm triggered

Reset switch

Check alarm status

Reset switch or place shifter

in park position

TOGGLE SWITCH

Check alarm status

ALARM TRIGGERED

* Refers to the number of parking light ﬂashes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote and System Operations

Passive Arming*

Park and exit the vehicle, after the doors are closed the Passive arm-

ing countdown begins. The led ﬂashes quickly and upon reaching 20

seconds the siren then chirps once. At 30 seconds the system arms

itself.

Anytime before the system arms you can re-enter the vehicle or

open the trunk to load or unload items and, after closing passive arm-

ing resumes.

To stay secure in case of accidental disarming the system, if a

door is not opened within 30 seconds the system re-arms itself and

locks the doors.

Auto Re-arming*

Auto re-arm ensures the vehicle stays protected if it is not entered after

disarming by remote control. After disarming by remote, the alarm

automatically re-arms itself (and locks the doors if programmed on) in

30 seconds. Open any point of entry to stop the re-arm until the next

disarm by remote.

Onetime Bypass*

Turn the ignition On for one to three seconds and then Off. The siren

chirps once to conﬁrm one-time bypass is enabled.

One-time bypass can be used to temporarily bypass the Passive arm-

ing operation for one cycle. It also bypasses the comfort closure and

auxiliary channel outputs programmed to activate when arming. After

the next disarm all operations return to normal.

* These features must be turned on by an authorized Directed dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Valet Mode

Valet mode can be entered and exited by performing the Remote Valet

command or manually using the vehicle key and the control button.

When entered, the alarm functions are defeated while the conve-

nience features still operate normally.

Arm and Disarm commands lock and unlock the doors while the

LOCKED IN VALET

UNLOCK IN VALET

and

animations and beeps play

to conﬁrm.

Use the following steps to manually enter and exit Valet Mode:

1. Turn the ignition switch On and then Off

2. Immediately press and release the control button once

3. The control center LED turns On when entering and Off when

exiting.

Power Save

To reduce power consumption the control center status LED modiﬁes

its output if the vehicle is parked for an extended period. If Armed the

ﬂashing is reduced after 24 hours. When Valet mode is On, the LED

turns off after 1 hour and resets each time the ignition is turned off.

Rapid Resume

If power is ever disconnected by a mechanic or thief, the system will

resume the state it was in at the time of disconnection, when power

is reconnected.

Automatic Remote Updates

The system sends a silent message to all remote controls after any

major action has occurred. When the remote receives this message it

updates the status screen icons. This way all users are able to quickly

review the system status just by accessing the status screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Out of Range

Each time a command is performed the remote will expect a command

response from the system. If a command response is not received the

OUT OF RANGE

screen and tone plays as an alert.

No Remote Output

Occasionally when a command is performed the remote may not

generate a command response output or Out of Range output. This

indicates that the system received the command but it was an incom-

plete command (e.g. Aux button pressed too short to activate the trunk

release) or it was an illegal message (e.g. the command was cor-

rupted due to local RF interference). These are temporary normal func-

tions of the system and remote, perform the command again within 10

seconds to return to normal operation.

Feature not Available

FEATURE NOT AVAILABLE

The

message is a generic one which varies in

cause and solution depending upon the command used:

Command

Cause

Reason/Solution

Runtime Reset Remote Start is Off

Sensor Bypass System is not armed

Only available when Remote Start is On

Only available when system is armed

Defroster

Remote Start is Off.

Not configured for

this.

Only available when Remote Start is On.

Only available when configured for

Defroster control.

Car Select

Car 2 name tag is

not set.

Set Car 2 name tag to activate Car 2

capability.

Car 1 or Car 2 is out

of range.

Move to within range .

Download from Www.Somanuals.com. All Manuals Search And Download.

No Function Assigned

The HD remote is designed for one button activation, all commands

can therefore be performed using one hand. If more than one button is

NO FUNCTION ASSIGNED

pressed at a time, the

as an alert.

screen and tone plays

Download from Www.Somanuals.com. All Manuals Search And Download.

1-way Companion Remote Control

LED

Command

Buttons

Function

Button

Basic

Advanced

Commands

(Function

Level 1)

Function

Level 2

Function

Level 4

Function

Level 5

Level 3

Direct Access

Level

Button

x 1

x 2

x 3

x 4

Arm/Lock

(Panic)

Silent Arm

Sensor

Bypass

Silent Disarm Remote Valet Car Finder

Sensor Silent Full Silent

Mode Mode*

Disarm/

Unlock

Remote Start

Runtime

Reset

Timer

Smart Start* Defroster*

Mode*

Aux/Trunk

Not Used

AUX 1

AUX 2

AUX 3

AUX 4

Used to access function levels for Advanced Commands

with multiplier in third row implies button presses)

(

* These Function Level commands on the 1-way do not reside in the exact same Function

Level location as on the HD remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the 1 way companion remote

The companion 1 way remote commands the system features as

shown in the previous table, but without the message display of the Re-

sponder HD remote. Siren chirps and vehicle parking light ﬂashes are

used to indicate that a command has been received and activated as

described in the Basic and Advanced command sections.

Accessing Commands

Similar to the HD remote, Basic commands are performed when

a command button is pressed directly. To perform Advanced Com-

mands press the button 1 to 4 times to access function levels,

in the table for example implies pressing 4 times. The LED ﬂashes in

groups for a few seconds to indicate the level. Press the desired com-

mand button while the LED is ﬂashing to perform the command.

Sensor Bypass operation

The lights ﬂash each time this command is received to indicate the

Sensor bypass type. 2 ﬂashes indicates sensor Warn-away zones

are bypassed, 3 ﬂashes indicates sensor Warn-away and Full Trigger

zones are bypassed. 1 ﬂash indicates sensor bypass is off.

Button Auto Lock

When On, the remote control buttons lock if more than 20 seconds

lapses between button presses. If a button is pressed when locked, a

fault tone is emitted. To unlock the buttons; press the button followed

by the

button, the buttons unlock and tones play to conﬁrm.

Car Select*

Car 2 must ﬁrst be turned On (See Remote Features menu under the

following Programming section to turn on). Press and hold the but-

Download from Www.Somanuals.com. All Manuals Search And Download.

ton for 3 seconds. The remote ﬂashes the LED and beeps once or

twice to indicate the selected Car is 1 or 2, release the button for Car

Select or continue to hold for programming.

Release the button, then press and release while the LED and

beeps continue to perform Car Select. Once the car is selected a com-

mand can be performed by pressing one of the command buttons.

* See System Expansion Options for more details .

Programming

To enter; hold the button for 8 seconds, the remote emits one long

beep and turns the LED on, the programming main menu has been

accessed.

To exit; press and release the button to go back and repeat to exit.

1 short and 1 long beep is emitted for each step back, the LED turns

off when programming is exited.

Sensor Adjust

The

button is used for sensor adjustment, to avoid unintended

alarm triggers, it is recommenced that an authorized Directed

dealer perform all sensor adjustments.

Remote Features menu

Press and release the

button, 2 LED ﬂashes and beeps indi-

cate the remote features menu is accessed and can be set. Press

buttons indicated below, 1beep and ﬂash turns the feature on, 2

beeps and ﬂashes turns the feature off.

Autolock feature: Press

Remote Beeps: Press

Car 2 feature: Press

to turn on/off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Learning

Press the

button,3 LED ﬂashes and beeps indicates the remote

is ready to program to the system.

Per the instruction in the Remote Pair section of this guide, follow-

ing step 4 of Placing the system into the remote pair mode. Press

and hold the

button, the siren emits one long chirp to conﬁrm

the remote has been learned.

Battery Information (1-Way)

The 1way companion remote is powered by one 3V coin cell lithium

battery (P/N CR-2032) that should last approximately one year under

normal use.

Battery Replacement

Rear View

1. Slide the battery cover up by ap-

plying equal pressure at its top and

bottom (the arrow on the cover indi-

cates the direction), remove the cover

from the remote control housing.

Battery

Clip

Battery

Cover

2. Gently pry up on the battery to re-

move it from the holder. Insert a new

battery into the holder and under the

clip with the positive (+) side up. Replace the battery cover. The re-

mote control is now ready for use.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Expansion Options

Controlling two vehicles (Car Select)

The Responder HD and 1way companion remote can control systems

in two different vehicles saving the need for multiple remote controls.

This feature also allows for customized system conﬁgurations on each

vehicle that has more than one driver. See Owner Recognition for

details.

When you select the car you wish to control, the remote con-

trol sends a request to the selected car which, if within range, re-

sponds with its system status information. The remote then displays the

new car screen followed by the updated status screen. If the newly

selected car does not respond the remote control then displays the

CAR 1 NOT AVAILABLE

screen (or Car 2 if applicable) and remains in

the newly selected car mode.

Owner recognition

The system can be conﬁgured to recognize the remote used when

disarming and change selected features to match the remote users

preferences. Memory seat adjustment, siren chirps, passive arming,

remote button auto unlocking, alarm output duration can all be custom

set for each remote user at the time of installation.

Comfort closure

Comfort Closure emulates turning the key in the door cylinder or hold-

ing the lock button of an OEM keyless entry. It will automatically close

the windows and sunroof on vehicles with this type of OEM conve-

nience feature.

Alarm output duration

The length of time the siren sounds can be adjusted from 1 to 180

Download from Www.Somanuals.com. All Manuals Search And Download.

seconds at the time of installation.

Arming and warn-away chirp control

The system arm, disarm and sensor warn-away chirps can be conﬁg-

ured for those that prefer a custom silent alarm operation.

Driver door priority unlocking

The door unlocking operation can be conﬁgured to emulate an OEM

style of driver priority unlocking for added security during disarming.

Auxiliary Channels

The Auxiliary Channel outputs of this system can activate many of the

convenience features found in today’s vehicles. Once a command

is performed to activate a convenience feature the Responder HD

displays an animation that matches the feature. The system installer

can clarify if any of the below listed features are compatible with your

vehicle.

Trunk release

Windows open/close

Left Sliding door open/close

Right Sliding door open/close

Rear Hatch open/close

Sunroof open/close

Audio system

Headlights

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery Information (Responder HD)

The Responder HD remote control is powered by an internal recharge-

able battery that can be serviced only through an authorized Directed

Electronics dealer. The information and precautions in this section

can help maximize your battery’s life and usage in providing your

Responder HD remote control with many years of trouble free opera-

tion.

The battery information for the 1way companion remote control can

be found in the 1-way Companion Remote Control section of this

manual.

Warnings! NEVER connect the supplied AC adapter

to products other than the Responder HD remote con-

trol. It is a high current device designed speciﬁcally for

rapid charging of the Responder HD battery and may

cause severe damage or explosion when connected to

any other products.

Charging the battery when the temperature is below

32°F (0°C) or above 113°F (45°C) may cause severe

battery damage and/or reduce battery life. Avoid

placing the remote control in areas exposed to ex-

treme cold or heat (direct sunlight) when charging the

battery.

Low Battery

After a command is performed the Responder HD and

1way companion remote controls check their battery level

and, when the level requires attention, will begin generat-

Download from Www.Somanuals.com. All Manuals Search And Download.

ing alerts. Once the alerts begin they will continue to command the

system for several days but should be charged at the earliest opportu-

nity or failure to control the system may occur.

Low Battery Alerts

When disarming the system using a remote control with a low battery

the siren will emit one additional chirp as an alert. If conﬁrmation

chirps are programmed off, the system will still emit one chirp as an

alert when disarming. The Responder HD remote control also inter-

LOW BATTERY ON REMOTE

rupts each Status screen output and plays the

screen with several alert beeps.

To preserve power at critically low battery levels the

HD remote disables the color display, stops receiving

messages from the system, and only performs basic

commands. The beeps and blue transmit LED continues

to operate while performing basic commands until the

battery is charged.

Important

Battery Life

The Responder HD remote control has many features that make it one

of the most unique remote controls on the market today, including su-

perior long range communication with the system. The default feature

settings provide for excellent battery charge duration. However, to

maximize this duration between charges, the following suggestions

will help:

Turn the remote Off: When not in use and/or out of range of the

vehicle, the remote can be turned off in the Options menu.

Set animations to Trigger only: The animations that play during

commands can be turned off in the Options menu. Only the trig-

Download from Www.Somanuals.com. All Manuals Search And Download.

ger message animations will play.

Turn Paging off: The remote will not wake up to check for mes-

sages with Paging off in the Settings menu.

Caution! The remote will not receive trigger messages from the

system.

Turn Beeps off: The Button beeps can be turned off in the Settings

menu. The command beeps still play normally.

Battery Disposal

Directed Electronics cares about the environment. If you

need to dispose of the battery, please do so in accordance

with your municipal requirements for battery disposal or re-

turn to Directed Electronics at: One Viper way, Vista, CA

92081 (Shipping and/or handling costs are the sole responsibility of

the owner/sender and will not be covered by Directed Electronics).

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary of Terms

Document Terminology

Control Module

The “brain” of your system. Usually hidden underneath the

dash area of the vehicle. It houses the microprocessor which

monitors your vehicle and controls all of the system’s func-

tions.

Responder HD (2-way A hand-held, remote control which operates the various func-

Remote Control)

tions of your system and receives messages and pages from

the system.

Companion Remote A hand-held, remote control which operates the various func-

(1-way Remote Con- tions of your system but does not provide message display.

trol)

Control Center

The control center contains the system’s radio-frequency an-

tenna, the control button, and the Status LED. For maximum

remote-control range, the Control Center is usually located at

the top of the windshield, centered near the rear-view mirror.

Status LED

A light used to indicate the status of your system. It is located

on your system’s Control Center.

Control Button

A small push button located on your system’s Control Center.

It is used to override (disarm) the alarm when a remote is not

available or to enter or exit Valet Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Responder HD 2-way SST Remote Control

Power Requirements:

Display:

5 VDC, 500 mA

128 by 128 pixel, 65k, Color Organic Light Emitting Diode

(OLED)

Frequency:

900 - 928 MHz Spread Spectrum

Operating Temperature: -10°C to +40°C (23°F to 104°F)

Security with Remote Start System (in Vehicle)

Power Requirements:

Siren Output:

11VDC - 14VDC

120 dB at 1 meter

Frequency:

900 - 928 MHz Spread Spectrum

Operating Temperature: -40°C to +85°C (-40°F to 185°F)

1-way SST Remote Control

Power Requirements:

Frequency:

3 VDC, CR2032 Coin Cell Battery

900 MHz

Operating Temperature: -10°C to +40°C (23°F to 104°F)

Download from Www.Somanuals.com. All Manuals Search And Download.

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates and can radiate radio frequency en-

ergy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television, which can be

determined by turning the equipment OFF and ON, the user is encouraged to

try to correct the interference by one or more of the following measures:

s 2EORIENT OR RELOCATE THE RECEIVING ANTENNAꢀ

s )NCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVERꢀ

s #ONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH

the receiver is connected.

s #ONSULT THE DEALER OR AN EXPERIENCED RADIO ꢁ 46 TECHNICIAN FOR HELPꢀ

Remote Controls

To satisfy FCC RF exposure compliance requirements, this device should be

used in hand-held, hand operated conﬁgurations only. The device and its an-

tenna must maintain a separation distance of 20 cm or more from the person’s

body, except for the hand and wrists, to satisfy RF exposure compliance. This

device is designed to be used in a person’s hands and its operating conﬁgu-

rations do not support normal transmissions while it is carried in pockets or

holsters next to a person’s body.

Download from Www.Somanuals.com. All Manuals Search And Download.

Control Center

To satisfy FCC RF exposure compliance requirements, the device and its an-

tenna must maintain a separation distance of 20 cm or more from the person’s

body, except for the hand and wrists, to satisfy RF exposure compliance.

This device complies with the Industry Canada Radio Standards Speciﬁcation

RSS 210. Its use is authorized only on a no-interference, no-protection basis;

in other words, this device must not be used if it is determined that it causes

harmful interference to services authorized by IC. In addition, the user of this

device must accept any radio interference that may be received, even if this

interference could affect the operation of the device.

WARNING! Changes or modiﬁcations not expressly approved by the party

responsible for compliance could void the user’s authority to operate this de-

vice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning! Safety First

Please read the safety warnings below before proceeding. Improper

use of the product may be dangerous or illegal.

Installation

Due to the complexity of this system, installation of this product must only be

performed by an authorized Directed dealer. If you have any questions, ask

your retailer or contact Directed directly at 1-800-753-0600.

Remote Start Capable

When properly installed, this system can start the vehicle via a command

signal from the remote control transmitter. Therefore, never operate the system

in an enclosed area or partially enclosed area without ventilation (such as a

garage). When parking in an enclosed or partially enclosed area or when

having the vehicle serviced, the remote start system must be disabled using the

installed menu wheel. It is the user’s sole responsibility to properly handle and

keep out of reach from children all remote control transmitters to assure that the

system does not unintentionally remote start the vehicle. THE USER MUST IN-

STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA

ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIV-

ING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STOR-

AGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the

sole responsibility of the user.

Manual Transmission Vehicles

Remote starters on manual transmission vehicles operate differently than those

with automatic transmission because you must leave your car in neutral. You

must read this Owner’s Guide to familiarize yourself with the proper procedures

regarding manual transmission remote starters. If you have any questions, ask

your authorized Directed dealer or contact Directed at 1-800-753-0600.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before remote starting a manual transmission vehicle, be sure to:

Leave the vehicle in neutral and be sure no one is standing in front or

behind the vehicle.

Only remote start on a ﬂat surface

Have the parking brake fully engaged

WARNING! It is the responsibility of the owner to ensure the parking/emer-

gency brake properly functions. Failure to do so can result in personal injury or

property damage. We recommend the owner have the parking / emergency

brake system inspected and adjusted by a qualiﬁed automotive shop biannu-

ally.

Use of this product in a manner contrary to its intended mode of operation may

result in property damage, personal injury, or death. (1) Never remotely start

the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle

with the keys in the ignition. The user must also have the neutral safety feature

of the vehicle periodically checked, wherein the vehicle must not remotely start

while the car is in gear. This testing should be performed by an authorized

Directed dealer in accordance with the Safety Check outlined in the product

installation guide. If the vehicle starts in gear, cease remote start operation im-

mediately and consult with the authorized Directed dealer to ﬁx the problem.

After the remote start module has been installed, contact your authorized dealer

to have him or her test the remote start module by performing the Safety Check

outlined in the product installation guide. If the vehicle starts when performing

the Neutral Safety Shutdown Circuit test, the remote start unit has not been

properly installed. The remote start module must be removed or the installer

must properly reinstall the remote start system so that the vehicle does not start

in gear. All installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN

Download from Www.Somanuals.com. All Manuals Search And Download.

GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPER-

ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY

RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME-

DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN

AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED

REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR

PAY FOR INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel injected vehicles only. Use of this

product in a standard transmission vehicle must be in strict accordance

with this guide.

This product should not be installed in any convertible vehicles, soft or

hard top with a manual transmission. Installation in such vehicles may

pose certain risk.

Interference

All radio devices are subject to interference which could affect proper

performance.

Upgrades and Batteries

Any upgrades to this product and/or installation of batteries must be

performed by an authorized dealer. Do not attempt to perform any

unauthorized modiﬁcations to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please

take care to keep this product dry and away from heat sources. Any

damage from water or heat will void the warranty.

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited lifetime consumer warranty

Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace

(at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf-

ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated

sensors and accessories, which proves to be defective in workmanship or material under

reasonable use during the lifetime of the vehicle provided the following conditions are

met: the unit was purchased from an authorized Directed dealer, the unit was profession-

ally installed and serviced by an authorized Directed dealer; the unit will be professionally

reinstalled in the vehicle in which it was originally installed by an authorized Directed

dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the

bill of sale or other dated proof of purchase bearing the following information: consumer’s

name, telephone number and address; the authorized dealers name, telephone number

and address; complete product description, including accessories; the year, make and

model of the vehicle; vehicle license number and vehicle identification number. All com-

ponents other than the unit, including without limitation the siren, the remote transmitters

and the associated sensors and accessories, carry a one-year warranty from the date of

purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR

WITHOUT PROOF OF PURCHASE WILL BE DENIED. This warranty is non-transferable

and is automatically void if: the original purchaser has not completed the warranty card

and mailed it within ten (10) days from the date of purchase to the address listed on the

card; the unit’s date code or serial number is defaced, missing or altered; the unit has

been modified or used in a manner contrary to its intended purpose; the unit has been

damaged by accident, unreasonable use, neglect, improper service, installation or other

causes not arising out of defects in materials or construction. The warranty does not cover

damage to the unit caused by installation or removal of the unit. Directed, in its sole

discretion, will determine what constitutes excessive damage and may refuse the return

of any unit with excessive damage.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING

BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY

OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF

NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED;

AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY

TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION

WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY

FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED

DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT,

ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A

GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE

AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY

Download from Www.Somanuals.com. All Manuals Search And Download.

LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT,

DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR

COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR

ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM

OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE

SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS

AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE

MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY

LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.

DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER,

INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL

DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF

EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE

LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A

LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO

THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT

HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED

DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE

USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER

CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.

Some states do not allow limitations on how long an implied warranty will last or the

exclusion or limitation of incidental or consequential damages. This warranty gives you

specific legal rights and you may also have other rights that vary from State to State.

This warranty is only valid for sale of product(s) within the United States of America.

Product(s) sold outside of the United States of America are sold “AS-IS” and shall have

NO WARRANTY, express or implied. This product may be covered by a Guaranteed

Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call

Directed Customer Service at 1-800-876-0800.

Make sure you have all of the following information from your authorized Directed

dealer:

A clear copy of the sales receipt, showing the following:

Date of purchase

Your full name and address

Authorized dealer’s company name and address

Type of alarm installed

Year, make, model and color of the automobile

Automobile license number

Vehicle identification number

All security options installed on automobile

Installation receipts

920-0003 06-06

Download from Www.Somanuals.com. All Manuals Search And Download.

Teac CD Player LPR400 User Manual
Technicolor Thomson Stereo System CS196 User Manual
Technika Flat Panel Television LCD32 909V User Manual
Timex Clock 75333TKL User Manual
Toshiba Flat Panel Television 26AV502U User Manual
Troy Bilt Tiller 634BM User Manual
Tut Systems Switch SMS2000 User Manual
Velodyne Acoustics Speaker VLF 810 User Manual
Viking Ventilation Hood DBCV3082 User Manual
Wayne Dalton Garage Door Opener DS 350 User Manual