OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
Standard Features & Accessories
All models include
• 27”D.
power when cooking temperatures
reach uncomfortable levels
• Variable speed ventilator controls
o Separate controls for on/off and
speed control
stainless steel for increased rigidity,
seamless appearance, and easy
cleaning
o Separate removable trough catches
liquefied grease
• Agency-certified for outdoor use
o Keeps outdoor air fresh
o Designed and constructed for damp
environments
• Canopy only—must also purchase
interior or exterior ventilator kit, sold
separately (see Installation Notes &
Accessories for recommended Viking
ventilators)
• Heavy-duty construction; professional-
type size, design, and styling
o Virtually seamless stainless steel
design with no visible screws
• Easy cleanup
• 50-watt halogen lights with dimmer
control
o Power switch and dimmer control are
separate, allowing you to leave
dimmer at favorite position
o Commercial-type baffle filter system
efficiently removes grease and
heated vapors from the air; especially
designed for use with commercial-
type products
o Design of low-profile filter system
means less interior hood space to be
cleaned
• Heat sensor turns the ventilator on full
o Canopy interior is completely lined in
Model Options
VWH3678T
36”W. Hood (for 30”W. grills)
VWH4878T
48”W. Hood (for 41”W. grills)
VWH6078T
60”W. Hood (for 53”W. grills)
FINISH DETAILS FOR ALL MODELS
• Stainless Steel (SS)
• Accessory Rail Option—Front of hood
(Must be ordered factory-installed)
o Stainless Steel/Chrome (CR)—Stainless
steel rail with chrome supports/brackets
and hooks (included).
o Brass Trim Option (BR)—Brass
nameplate, rail, supports/brackets, and
hooks (included). Brass components
have a durable protective coating for
maintenance-free normal use.
ORDERING INSTRUCTIONS
If ordering optional decorative rail, specify code at end (VWH3678T-CR).
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
Dimensions & Specifications
CLEARANCE DIMENSIONS
66”min.
(167.6 cm)
30”min.
72”max.
(76.2 c
(182.9 cm)
m)
36”max.
(91.4 cm)
36 ”
(91.4 cm)
Note: Viking Outdoor hoods must be installed in a covered, non-enclosed area, and should be protected from the elements as much
as possible.
The bottom of the hood should be 30” (76.2 cm) to 36” (91.4 cm) above the grill surface. The hood should be installed 4-1/2” (11.4
cm) plus the distance between the back trim and surface from the back wall. (Note: There is a 3” minimum clearance from the back
trim to non-combustible surfaces, and a 24” minimum to combustible surfaces.) This will require building the hood out from the wall.
Any combustible material used for this purpose must be covered with locally-supplied stainless steel. Viking also recommends using a
backsplash.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
Installation Requirements
VWH3678T
36”W. Hood (for 30”W. grills)
VWH4878T
48”W. Hood (for 41”W. grills)
VWH6078T
60”W. Hood (for 53”W. grills)
UTILITY
REQUIREMENTS
Proper installation/ ducting is
extremely important to ensure
maximum performance. Use a qualified
and trained installer.
• 10” duct run for 900 – 1500
CFM
o Never use flexible duct; it
creates back pressure/air
turbulence and greatly
reduces performance.
DUCTING
• Check with a qualified and
trained installer or local codes
for makeup air requirements, if
any.
ELECTRICAL
• Hardwire direct with two-wire
with ground
• Max. duct run
• 120 VAC/60 Hz
o For 1,200 CFM—50’ (15.2 m)
o For 1,500 CFM—75’ (22.9 m)
o Duct run length is for
general reference only; for
longer duct runs, increase
duct size and contact a
qualified and trained
installer.
PLUMBING
Not applicable
GAS
Not applicable
o The 1,500 CFM ventilator
should be used with longer
duct runs.
o Straight runs and gradual
turns are best; for example,
each 90° elbow is equivalent
to 5 – 10 feet (1.52 – 3.05
cm) of straight run.
Model
Ventilator Kits
Interior Exterior
Duct Size
Max. Amps*
Interior
Exterior
Interior
8.7
Exterior
6.1/6.8
8.8/9.5
8.8/9.5
VWH3678T
VWH4878T
VWH6078T
VIV1200
VIV1200
VIV1200
VEV1200/1500
VEV1200/1500
VEV1200/1500
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
11.5
11.5
*Maximum amp rating for hoods includes recommended ventilator kit rating.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
Installation Notes & Accessories
✪
Recommended Ventilator Kits
• Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty
• See ventilation product pages (indoor) for more information and additional specifications
Model
Description
Approx. ship wt. lbs. (kg)
VIV1200
VEV1200
VEV1500
1,200 CFM interior-power
1,200 CFM exterior-power
1,500 CFM exterior-power
43 (19.4)
53 (23.9)
47 (21.3)
Duct Covers
• Stainless Steel (SS)
• Constructed of 18-gauge stainless steel
• 12”D.
• Extends height of hood by 12”—conceals duct
Model
Description
Approx. ship wt. lbs. (kg)
DCW36T
DCW48T
DCW60T
Outdoor 36”W. duct cover
Outdoor 48”W. duct cover
Outdoor 60”W. duct cover
11 (5.0)
14 (6.3)
24 (10.8)
Backsplashes
• Stainless Steel (SS)
• 30”H.
• Backsplashes protect the wall space below hood
• Create a continuous finish between cooking surface and hood
• Low maintenance, easy to clean
• Hemmed edges with screw holes
• Kit includes backsplash and fastening screws
Model
BKS36
BKS48
BKS60
Description
Approx. ship wt. lbs. (kg)
9 (4.1)
36”W. backsplash
48”W. backsplash
60”W. backsplash
14 (6.3)
20 (9.0)
Compliance Information
WARRANTY SUMMARY*
• One-year full warranty—complete product
• Five-year limited warranty—ventilator motor
• Lifetime limited warranty—rust through on all stainless-steel components
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items
*Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty. For complete warranty see Use & Care Guide.
Warranty valid on Viking products shipped within the United States and Canada.
PLANNING AND DESIGN GUIDE
RELEASED 12/1/07
©2007 VRC— INFORMATION SUBJECT TO CHANGE
V I K I N G R A N G E . C O M
•
1 - 8 8 8 - V I K I N G 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|