DRAM-1M
Telecommunication Peripheral Products
Memory Expansion Kit for the
TMS-6X and TMS-12A
Application Note
July 21, 1998
Expand the Digital Voice Memory of
Your TMS-6X or TMS-12A
The DRAM-1M memory expansion kit
expands the digital voice memory of the TMS-
6X and TMS-12A call sequencers. The kit
provides 88 additional seconds of digital
memory, for a total of 2 minutes. Each kit
includes three DRAM chips.
Sales...(715) 386 - 8861
Specifications
Installation
Important: Electronic components are sensitive to static
electricity. Personnel and the work area should be grounded
before handling.
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-
condensing humidity
Description: Three 18 pin DRAM chips
1. Disconnect the power to the call sequencer.
Made in the U.S.A.
2. Open the closure of the TMS-12A or TMS-6X,by removing the
exposed screws.
3. Carefully insert the DRAM chips with the indents facing in the
TMS-12A
direction as shown in the diagram below.
4. Replace the cover of the call sequencer.
TMS-6X
Product Support Line...(715) 386-8666
Fax Back Line...(715) 386-4345
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking
Electronics, its affiliates and/or subsidiaries assume no responsibility for errors and/or omissions contained in this information. Revisions of
this document or new editions of it may be issued to incorporate such changes.
ZF290150 Rev B
Fax Back Doc # 811
Printed in the U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|