®
ViewSonic
PJL7211
- User Guide
XGA LCD Projector
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
- 사용자 안내서
Model No. : VS12890
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this unit near water.
Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide for
further instructions.
7.
8.
9.
Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade and the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience
receptacles and the point where they exit from the unit. Be sure that the power outlet is
located near the unit so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the unit. When a cart is used, use caution when
moving the cart/unit combination to avoid injury from tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is
spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the
unit does not operate normally or has been dropped.
ViewSonic
ꢀꢀ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of
the European Parliament and the Council on restriction of the use of certain hazardous substances
in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the
maximum concentration values issued by the European Technical Adaptation Committee (TAC)
as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or
more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
ViewSonic
ꢀꢀꢀ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyright© ViewSonic© Corporation, 2009. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks
of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing
this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you
may mail or fax to ViewSonic.
For Your Records
Product Name:
PJL7211
ViewSonic XGA LCD Projector
VS12890
Model Number:
Document Number:
Serial Number:
Purchase Date:
PJL7211_UG_ENG Rev. 1A 08-18-09
_______________________________
_______________________________
Personal Identification Number (PIN):
The lamp in this product contains mercury.
Please dispose of in accordance with local, state or federal laws.
ViewSonic
ꢀv
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
PProJjeLc7to2r 11
User’s Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
NOTICE
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
• Mac® is a registered trademark of Apple Inc.
• Windows® is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
All other trademarks are the properties of their respective owners.
ViewSonic
ꢁ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
About this manual 1 PICTURE menu 25
Brightness, contrAst, gAmmA,
color temp, color, tint, shArpness,
my memory
Contents 2
Projector features 3
Preparations 3
Checking the contents of package. . . 3
IMAGE menu 28
Aspect, over scAn, v position, h position,
Part names 4
h phAse, h size, Auto Adjust execute
Projector . . . . . . . . . . . . . . . . . . . . . . 4
Control panel. . . . . . . . . . . . . . . . . . . 5
Rear panel . . . . . . . . . . . . . . . . . . . . 5
Remote control . . . . . . . . . . . . . . . . . 6
Setting up 7
Arrangement . . . . . . . . . . . . . . . . . . . 7
Connecting your devices. . . . . . . . . . 9
INPUT menu 30
progressive, video nr, color spAce,
video FormAt, computer in, FrAme locK,
resolution
SETUP menu 33
Keystone, eco mode, mirror
SCREEN menu 34
Connecting power supply . . . . . . . . ꢁꢁ
Using the security bar and slot . . . . ꢁꢁ
Remote control 12
Installing the batteries. . . . . . . . . . . ꢁꢂ
About the remote control signal . . . ꢁ3
Changing the frequency of remote control signal . . ꢁ3
Power on/off 14
Turning on the power . . . . . . . . . . . ꢁ4
Turning off the power . . . . . . . . . . . ꢁ4
Operating 15
Selecting an input signal. . . . . . . . . ꢁ5
Searching an input signal . . . . . . . . ꢁ6
Selecting an aspect ratio. . . . . . . . . ꢁ6
Adjusting the projector’s elevator . . ꢁ7
Adjusting the zoom and focus. . . . . ꢁ7
Using the automatic adjustment feature. . . ꢁ8
Adjusting the position . . . . . . . . . . . ꢁ8
Correcting the keystone distortions. . ꢁ9
Using the magnify feature. . . . . . . . ꢁ9
Temporarily freezing the screen . . . ꢂ0
Temporarily blanking the screen . . ꢂ0
lAnguAge, menu position, BlAnK,
stArt up,
,
M
yScreen
, M
yScreen Lock
messAge, source nAme, templAte, c.c.
OPTION menu 39
Auto seArch, direct on,
Auto oFF, lAmp time, Filter time,
my Button, my source, service
SECURITY menu 44
security pAssword chAnge,
pAssword, pin locK,
M
yScreen
my text pAssword, my text displAy,
my text writing
Maintenance 49
Replacing the lamp . . . . . . . . . . . . . 49
Cleaning and replacing the air filter . . 5ꢁ
Other care. . . . . . . . . . . . . . . . . . . . 53
Troubleshooting 54
Related messages . . . . . . . . . . . . . 54
Regarding the indicator lamps . . . . 55
Shutting the projector down . . . . . . 56
Using the menu function . . . . . . . . ꢂꢁ Resetting all settings. . . . . . . . . . . . 56
Phenomena that may be easy
to be mistaken for machine defects. . 57
Specifications 59
EASY MENU 23
Aspect, Keystone, picture mode,
eco mode, mirror, reset, Filter time,
lAnguAge, AdvAnced menu, exit
ViewSonic
ꢂ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector features / Preparations
Projector features
The projector provides you with the broad use by the following features.
ü This projector realizes the large projection image, even if in a small space.
ü This projector is the bright and value XGA (1024x768 pixels) projector.
XGA is the mainstream native resolution as standard projectors, and this
projector is compatible with up-to UXGA (1600x1200 pixels) by resizing.
ü Computer and Video inputs as well as Component video input supported
through COMPUTER IN port provide you sufficient projection function.
Preparations
Checking the contents of package
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
Your projector should come with the items
shown below. Check that all the items are
included. Require of your dealer immediately if
any items are missing.
(ꢁ)
ASPECT
AUTO SEARCH BLANK
(3)
(4)
M
A
G
N
I
F
Y
F
R
E
E
Z
E
PAGE
UP
VOLUME
ON
㧗
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
POSITION
ENTER
ESC
RESET
(1) Remote control with two AA batteries
(2) Power cord
(3) Computer cable
(ꢂ)
(4) User’s manuals (Book x1, CD x1)
NOTE • Keep the original packing materials, for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
ViewSonic
3
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Part names
Projector
(ꢁ)
HOT!
(ꢂ) (3)
(4)
(1) Lamp cover
The lamp unit is inside.
(2) Focus ring
(3) Zoom ring
(4) Control panel
(5) Elevator buttons (x 2)
(6) Elevator feet (x 2)
(7) Remote sensor
(8) Lens
(7)
(5)
(6)
(8)
(9)
(6)
(ꢁ0)
(6)
(9) Intake vents
(6)
(10) Filter cover
The air filter and intake vent
are inside.
(11) Exhaust vent
(12) AC IN (AC inlet)
(13) Rear panel
(14) Security bar
(15) Security slot
(ꢁꢁ)
HOT!
(ꢁ3)
(4)
(ꢁ)
HOT!
(ꢁꢂ)
(ꢁ4)
(ꢁ5)
(ꢁ3)
(ꢁꢁ)
HOT!
WARNING ►HOT! : Do not touch around the lamp cover and the exhaust
vents during use or just after use, since it is too hot.
►Do not look into the lens or vents while the lamp is on, since the strong light is
not good for your eyes.
►Do not handle the elevator buttons without holding the projector, since the
projector may drop down.
CAUTION ►Maintain normal ventilation to prevent the projector from
heating up. Do not cover, block or plug up the vents. Do not place anything that
can stick or be sucked to the vents, around the intake vents. Clean the air filter
periodically.
►Do not use the security bar and slot to prevent the projector from falling down,
since it is not designed for it.
ViewSonic
4
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Control panel
(1) STANDBY/ON button
(2) INPUT button
(5) (6)
(3) MENU button
It consists of four cursor buttons.
(4) POWER indicator
(5) TEMP indicator
(ꢁ)
(ꢂ)
(3)
(4)
(6) LAMP indicator
Rear panel
(1) COMPUTER IN port
(2) Shutdown switch
(3) VIDEO port
(3)
(ꢂ)
(ꢁ)
CAUTION ►Use the shutdown switch only when the projector is not
turned off by normal procedure, since pushing this switch stops operation of the
projector without cooling it down.
ViewSonic
5
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Remote control
(1) VIDEO button
(2) COMPUTER button
(3) SEARCH button
(4) STANDBY/ON button
(5) ASPECT button
(6) AUTO button
(ꢂ)
(ꢁ)
(6)
(5)
(ꢁꢂ)
(8)
(9)
(ꢁ5)
(ꢁ3)
(ꢁ6)
(ꢁ8)
(ꢁ0)
(4)
(3)
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
(7)
MAGNIFY
FREEZE
PAGE
UP
VOLUME
*
㧗
ON
*
DOWN
OFF
(ꢁꢁ)
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
(7) BLANK button
*
(8) MAGNIFY - ON button
(9) MAGNIFY - OFF button
(10) MY SOURCE/DOC.CAMERA button
(11) VOLUME - button
(12) FREEZE button
*
POSITION
(ꢁ4)
ENTER
(ꢁ7)
(ꢁ9)
(ꢂꢁ)
ESC
RESET
(ꢂ0)
(13) MY BUTTON - 1 button
(14) MY BUTTON - 2 button
(15) KEYSTONE button
(16) POSITION button
(17) MENU button
These buttons don’t work.
*
(18) ▲/▼/◄/► cursor buttons
(19) ENTER button
(20) ESC button
(21) RESET button
(22) Battery cover
(ꢂꢂ)
Back of
the remote control
NOTICE
►When one of the buttons marked with “*” was pressed, a message
“NOT AVAILABLE” appears on the screen.
• The VOLUME - button only works when being pressed with the RESET
button to change the remote signal frequency. Otherwise, a message “NOT
AVAILABLE” appears.
ViewSonic
6
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Setting up
Install the projector according to the environment and manner the projector will be
used in.
Arrangement
Refer to the illustrations and tables below to determine screen size and projection
distance.
The values shown in the table are calculated for a full size screen: 1024 x 768
a Screen size (diagonal)
b Projection distance (±10%)
c1 , c2 Screen height (±10%)
On a horizontal surface
Suspended from the ceiling
• Keep a space of 30 cm or more between the
sides of the projector and other objects such
as walls.
• For the case of installation in a special state
such as ceiling mount, the specified mounting
accessories and service may be required.
Before installing the projector, consult your
dealer about your installation.
4 : 3 screen
16 : 9 screen
a
b
Projection distance
b
c1
Screen
height
c2
Screen
height
c1
c2
Screen size
(diagonal)
Projection distance
Screen
height
Screen
height
min. max.
min.
max.
type
(inch)
m
m
inch
m
inch cm inch cm inch
m
inch
m
inch cm inch cm inch
30 0.8 0.8 33 1.0 40
40 1.0 1.1 45 1.4 54
50 1.3 1.4 56 1.7 68
60 1.5 1.7 68 2.1 8ꢂ
70 1.8 2.0 80 2.4 96
38
5ꢁ
64
76
89
ꢁ5
ꢂ0
ꢂ5
30
35
8
3
4
5
6
7
8
9
0.9 36 1.1 44
1.2 49 1.5 59
1.6 6ꢂ 1.9 74
1.9 74 2.3 89
35
47
59
7ꢁ
ꢁ4
ꢁ9
ꢂ3
ꢂ8
3ꢂ
37
ꢂ
3
ꢁ
ꢁ
ꢁ
ꢂ
ꢂ
ꢂ
ꢂ
3
3
4
5
7
8
ꢁ0
ꢁ3
ꢁ5
ꢁ8
ꢂ0
ꢂ3
ꢂ5
30
38
3
4
2.2 87 2.7 ꢁ04 8ꢂ
5
80 2.0 2.3 9ꢁ 2.8 ꢁꢁ0 ꢁ0ꢂ 40
90 2.3 2.6 ꢁ03 3.1 ꢁꢂ3 ꢁꢁ4 45
ꢁ00 2.5 2.9 ꢁꢁ4 3.5 ꢁ37 ꢁꢂ7 50
ꢁꢂ0 3.0 3.5 ꢁ37 4.2 ꢁ65 ꢁ5ꢂ 60
ꢁ50 3.8 4.4 ꢁ7ꢂ 5.2 ꢂ07 ꢁ9ꢁ 75
2.5 99 3.0 ꢁꢁ9 94
6
2.8 ꢁꢁꢂ 3.4 ꢁ35 ꢁ06 4ꢂ
6
ꢁ0 3.2 ꢁꢂ4 3.8 ꢁ50 ꢁꢁ8 46
ꢁꢂ 3.8 ꢁ50 4.6 ꢁ80 ꢁ4ꢁ 56
ꢁ5 4.8 ꢁ87 5.7 ꢂꢂ5 ꢁ76 69
ꢂ0 6.4 ꢂ50 7.6 30ꢁ ꢂ35 93
7
8
ꢁ0
ꢁ4
ꢂ00 5.1 5.8 ꢂ30 7.0 ꢂ76 ꢂ54 ꢁ00 5ꢁ
ꢂ50 6.4 7.3 ꢂ87 8.8 345 3ꢁ8 ꢁꢂ5 64
300 7.6 8.8 345 10.5 4ꢁ4 38ꢁ ꢁ50 76
ꢂ5 8.0 3ꢁ3 9.6 376 ꢂ94 ꢁꢁ6 ꢁ7
30 9.5 376 11.5 45ꢂ 353 ꢁ39 ꢂꢁ
ViewSonic
7
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Arrangement (continued)
WARNING ►Place the projector in a stable horizontal position. If the
projector falls or is knocked over, it could cause injury and/or damage to the
projector. Using a damaged projector could then result in fire and/or electric
shock.
• Do not place the projector on an unstable, slanted or vibrational surface such
as a wobbly or inclined stand.
• Do not place the projector on its side, front or rear position.
• Consult with your dealer before a special installation such as suspending from
a ceiling or somewhere else.
►Place the projector in a cool place, and ensure that there is sufficient
ventilation. The high temperature of the projector could cause fire, burns and/or
malfunction of the projector.
• Do not stop-up, block or otherwise cover the projector’s vents.
• Keep a space of 30 cm or more between the sides of the projector and other
objects such as walls.
• Do not place the projector on metallic thing or anything weak in heat.
• Do not place the projector on carpet, cushions or bedding.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place anything near the projector lens or vents, or on top of the
projector.
• Do not place anything that may be sucked into or stick to the vents on the
bottom of the projector. This projector has some intake vents also on the
bottom.
►Do not place the projector anyplace where it may get wet. Getting the projector
wet or inserting liquid into the projector could cause fire, electric shock and/or
malfunction of the projector.
• Do not place the projector in a bathroom or the outdoors.
• Do not place anything containing liquid near the projector.
►Use only the mounting accessories the manufacturer specified, and leave
installing and removing the projector with the mounting accessories to the
service personnel.
• Read and keep the user’s manual of the mounting accessories used.
CAUTION ►Avoid placing the projector in smoky, humid or dusty place.
Placing the projector in such places could cause fire, electric shock and/or
malfunction of the projector.
• Do not place the projector near humidifiers, smoking spaces or a kitchen.
►Position the projector to prevent light from directly hitting the projector’s remote
sensor.
ViewSonic
8
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations to
connect them. To input component video signal to the projector, an RCA to D-sub
cable or adapter is required. For more information, please see the description of
the COMPUTER IN item of the INPUT menu.
VCR/DVD player
PC
RGB OUT
COMPONENT VIDEO OUT
CB/PB CR/PR
VIDEO OUT
Y
WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior
to connecting them to projector. Connecting a live device to the projector
may generate extremely loud noises or other abnormalities that may
result in malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about
non-accessory cables which may be required a specific length or a ferrite
core by the regulations. For cables with a core only at one end, connect
the end with the core to the projector.
►
Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
NOTICE
►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
ViewSonic
9
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting your devices (continued)
NOTE
• Be sure to read the manuals for devices before connecting them to
the projector, and make sure that all the devices are suitable to be connected
with this product. Before connecting to a PC, check the signal level, the signal
timing, and the resolution.
- Some signal may need an adapter to input this projector.
- Some PCs have multiple screen display modes that may include some signals
which are not supported by this projector.
- Although the projector can display signals with resolution up to UXGA
(1600X1200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and the projector panel are identical.
• While connecting, make sure that the shape of the cable’s connector fits the
port to connect with. And be sure to tighten the screws on connectors with
screws.
• When connecting a laptop PC to the projector, be sure to activate the PC’
s external RGB output. (Set the laptop PC to CRT display or to simultaneous
LCD and CRT display.) For details on how this is done, please refer to the
instruction manual of the corresponding laptop PC.
• When the picture resolution is changed on a PC depending on an input,
automatic adjustment function may take some time and may not be completed.
In this case, you may not be able to see a check box to select “Yes/No” for the
new resolution on Windows. Then the resolution will go back to the original.
It might be recommended to use other CRT or LCD monitors to change the
resolution.
• In some cases, this projector may not display a proper picture or display
any picture on screen. For example, automatic adjustment may not function
correctly with some input signals. An input signal of composite sync or sync on
G may confuse this projector, so the projector may not display a proper picture.
About Plug-and-Play capability
Plug-and-Play is a system composed of a PC, its operating system and
peripheral equipment (i.e. display devices). This projector is VESA DDC 2B
compatible. Plug-and-Play can be used by connecting this projector to a PC
that is VESA DDC (display data channel) compatible.
• Take advantage of this feature by connecting a computer cable to the
COMPUTER IN port (DDC 2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Please use the standard drivers in your PC as this projector is a Plug-and-
Play monitor.
ViewSonic
ꢁ0
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
Connecting power supply
Put the connector of the power cord into the
AC IN (AC inlet) of the projector.
1.
Firmly plug the power cord’s plug into the
outlet. In a couple of seconds after the
power supply connection, the POWER
2.
indicator will light up in steady orange.
Please remember that when the DIRECT ON function
activated, the connection of the power supply make
the projector turn on.
AC IN
Power cord
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Never modify the power cord.
Using the security bar and slot
A commercial anti-theft chain or wire up to
Security slot
10 mm in diameter can be attached to the
security bar on the projector.
Also this product has the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
Security bar
Anti-theft chain or wire
WARNING ►Do not use the security bar and slot to prevent the projector
from falling down, since it is not designed for it.
CAUTION ►Do not place anti-theft chain or wire near the exhaust vents. It
may become too hot.
NOTE • The security bar and slot is not comprehensive theft prevention
measures. It is intended to be used as supplemental theft prevention measure.
ViewSonic
ꢁꢁ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Remote control
Installing the batteries
Please insert the batteries into the remote control before using it. If the remote control
starts to malfunction, try to replace the batteries. If you will not use the remote control for
long period, remove the batteries from the remote control and store them in a safe place.
Holding the hook part of the battery
cover, remove it.
1
2
3
1.
2.
Align and insert the two AA batteries
(HITACHI MAXELL, Part No.LR6 or R6P)
according to their plus and minus terminals
as indicated in the remote control.
3. Replace the battery cover in the direction of the arrow and snap it back into place.
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
•
Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
ViewSonic
ꢁꢂ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
About the remote control signal
The remote control works with the projector’s remote
sensor. This projector has a remote sensor on the front.
The sensor senses the signal within the following range
when the sensor is active:
60 degrees (30 degrees to the left and right of the sensor)
within 3 meters about.
Approx.
3 m
30º
30º
NOTE • The remote control signal reflected in the screen or the like may be
available. If it is difficult to send the signal to the sensor directly, attempt to
make the signal reflect.
• The remote control uses infrared light to send signals to the projector (Class 1
LED), so be sure to use the remote control in an area free from obstacles that
could block the remote control’s signal to the projector.
• The remote control may not work correctly if strong light (such as direct
sun light) or light from an extremely close range (such as from an inverter
fluorescent lamp) shines on the remote sensor of the projector. Adjust the
position of projector avoiding those lights.
Changing the frequency of remote control signal
The accessory remote control has the two choices on signal
frequency, Mode 1:NORMAL and Mode 2:HIGH. If the remote
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
control does not function properly, attempt to change the
signal frequency.
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
In order to set the Mode, please keep pressing the
combination of two buttons listed below simultaneously for
about 3 seconds.
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
(ꢂ)
(ꢁ)
POSITION
ENTER
(1) Set to Mode 1:NORMAL... VOLUME - and RESET buttons
ESC
RESET
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE
item of the OPTION menu of the projector to be controlled
should be set to the same mode as the remote control.
ViewSonic
ꢁ3
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Power on/off
Power on/off
STANDBY/ON button
Turning on the power
POWER indicator
Make sure that the power cord is firmly and
correctly connected to the projector and the
outlet.
1.
Make sure that the POWER indicator is
steady orange.
2.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
MAGNIFY FREEZE
ON
PAGE
UP
VOLUME
㧗
DOWN
OFF
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the POWER
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
3.
POSITION
ENTER
ESC
RESET
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and light in steady green.
To display the picture, select an input signal according to the section “Selecting an
input signal”.
Turning off the power
Press the STANDBY/ON button on the projector or the remote control. The
message “Power off?” will appear on the screen for about 5 seconds.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking
1.
2.
in orange. Then the POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete.
Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING ►A strong light is emitted when the projector’s power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
NOTE • Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn
on/off. Please refer to the DIRECT ON and AUTO OFF items of the OPTION
menu.
• Use the shutdown switch only when the projector is not turned off by normal
procedure.
ViewSonic
ꢁ4
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Operating
Selecting an input signal
INPUT button
Press the INPUT button on the projector.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN
VIDEO
ó
● While ON is selected for the AUTO SEARCH item in the
OPTION menu, the projector will keep checking the ports
alternately till an input signal is detected.
COMPUTER button
Press COMPUTER button on the remote control to
select the COMPUTER IN port.
1.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
MAGNIFY
FREEZE
PAGE
UP
VOLUME
Press VIDEO button on the remote control to select the
㧗
ON
1.
VIDEO port.
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
VIDEO button
Press the MY SOURCE / DOC. CAMERA button on
the remote control. The input signal will be changed
into the signal you set as MY SOURCE.
MY SOURCE /
1.
DOC. CAMERA button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
● This function also can use for document camera. Select
the input port that connected the document camera.
ASPECT
AUTO SEARCH BLANK
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
ViewSonic
ꢁ5
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Searching an input signal
SEARCH button
Press SEARCH button on the remote control.
The projector will start to check its input ports in order, and
1.
display the image of the proper signal found first.
The projector checks the selected port first. When no signal
is found in the port, the projector checks the other port.
If no proper signal is found in either port, the projector
selects the first port again.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
PAGE
UP
VOLUME
MAGNIFY
FREEZE
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
COMPUTER IN
VIDEO
ó
● While ON is selected for the AUTO SEARCH item in the OPTION menu,
the projector will keep checking the ports alternately till an input signal is
detected.
Selecting an aspect ratio
ASPECT button
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
1.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
For a computer signal
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
NORMAL 4:3 16:9 16:10
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
For a video signal or component video signal
POSITION
4:3 16:9 14:9
For no signal
4:3 (fixed)
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
ViewSonic
ꢁ6
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Adjusting the projector’s elevator
When the place to put the projector is slightly uneven to the left or right, use the
elevator feet to place the projector horizontally.
Using the feet can also tilt the projector in order to project at
a suitable angle to the screen, elevating the front side of the
projector within 14 degrees.
14°
This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is
adjustable while pushing the elevator button on the same side as it.
1. Holding the projector, push the elevator buttons to loose the elevator feet.
2. Position the front side of the projector to the desired height.
3. Release the elevator buttons in order to lock the elevator feet.
After making sure that the elevator feet are locked, put the projector down
gently.
4.
If necessary, the elevator feet can be manually twisted to make more precise
adjustments. Hold the projector when twisting the feet.
5.
1
5
To loose an elevator foot, push the
elevator button on the same side as it.
To finely adjust, twist the foot.
CAUTION ►Do not handle the elevator buttons without holding the
projector, since the projector may drop down.
►Do not tilt the projector other than elevating its front within 14 degrees using
the adjuster feet. A tilt of the projector exceeding the restriction could cause
malfunction or shortening the lifetime of consumables, or the projector itself.
Adjusting the zoom and focus
Zoom ring
1. Use the zoom ring to adjust the screen size.
2. Use the focus ring to focus the picture.
Focus ring
ViewSonic
ꢁ7
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Using the automatic adjustment feature
AUTO button
Press AUTO button on the remote control.
1.
Pressing this button performs the following.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
For a computer signal
ASPECT
AUTO SEARCH BLANK
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted.
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
KEYSTONE
MY BUTTON
MUTE
MENU
1
2
POSITION
For a video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for the
VIDEO FORMAT item in the INPUT menu. The vertical position and horizontal
position will be automatically set to the default.
For a component video signal
The vertical position, horizontal position and horizontal phase will be
automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also please
note that it may not function correctly with some input.
● When this function is performed for a video signal, a certain extra such as a line
may appear outside a picture.
● When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the PC model.
●
The items adjusted by this function may vary when the FINE or DISABLE is selected
for the AUTO ADJUST item of the SERVICE item in the OPTION menu.
Adjusting the position
KEYSTONE
POSITION
MY BUTTON
1
MUTE
MENU
Press the POSITION button on the remote control when no menu
2
1.
is indicated.
The “POSITION” indication will appear on the screen.
ENTER
Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press the RESET button
on the remote control during the operation.
ESC
RESET
2.
To complete this operation, press the POSITION button again.
Even if you do not do anything, the dialog will automatically
disappear after a few seconds.
POSITION button
●
When this function is performed on a video signal or component video signal, some
image such as an extra-line may appear at outside of the picture.
● When this function is performed on a video signal or component video signal, the
range of this adjustment depends on OVER SCAN in IMAGE menu setting. It is
not possible to adjust when OVER SCAN is set to 10.
● If the POSITION button is pressed when a menu is indicated on screen, the
displayed picture does not move its position but the menu does.
ViewSonic
ꢁ8
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
KEYSTONE button
Correcting the keystone distortions
Press KEYSTONE button on the remote
control. A dialog will appear on the screen to
aid you in correcting the distortion.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
1.
ASPECT
AUTO SEARCH BLANK
MAGNIFY
FREEZE
PAGE
UP
VOLUME
㧗
ON
Use the ◄/► buttons for adjustment.
To close the dialog and complete this operation, press
KEYSTONE button again. Even if you do not do anything, the
DOWN
OFF
2.
KEYSTONE
MY BUTTON
MUTE
1
2
dialog will automatically disappear after a few seconds.
● The adjustable range of this function will vary among inputs. For some input, this
function may not work well.
● When the projector is inclined to near ±30 degree or over, this function may not
work well.
MAGNIFY
ON/OFF button
Using the magnify feature
Press the ON button of MAGNIFY on the remote control.
The “MAGNIFY” indication will appear on the screen and the
projector will go into the MAGNIFY mode. When the ON button
1.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
of MAGNIFY is pressed first after the projector is started, the
picture will be zoomed twice. The indication will disappear in
several seconds with no operation.
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
Use the ▲/▼ cursor buttons to adjust the zoom level.
2.
To move the zoom area, press the POSITION button in the MAGNIFY mode, then
use the ▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom
area, press the POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
● The projector automatically exits from the MAGNIFY mode when the input signal
is changed or when the display condition is changed.
● In the MAGNIFY mode, the keystone distortion condition may vary, it will be
restored when the projector exits from the MAGNIFY mode.
NOTE • The zoom level can be finely adjusted. Closely watch the screen to
find the level you want.
ViewSonic
ꢁ9
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Temporarily freezing the screen
FREEZE button
Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen (however,
1.
MY SOURCE/
COMPUTER
VIDEO
DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
the indication will not appear when the OFF is selected for the
MESSAGE item in the SCREEN menu), and the projector will
go into the FREEZE mode, which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
● The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
● If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
● Images might appear degraded when this function is operated, but it is not a
malfunction.
Temporarily blanking the screen
BLANK button
Press the BLANK button on the remote control.
1.
The BLANK screen will be displayed instead of the screen of
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
input signal. Please refer to the BLANK item in the SCREEN
ASPECT
AUTO SEARCH BLANK
menu.
FREEZE
PAGE
UP
VOLUME
MAGNIFY
㧗
ON
To exit from the BLANK screen and return to the input signal
screen, press the BLANK button again.
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
● The projector automatically exits from the BLANK mode when
some control buttons are pressed.
CAUTION ►If you wish to have a blank screen while the projector's lamp
is on, use the BLANK function above.
Taking any other action may cause the damage on the projector.
ViewSonic
ꢂ0
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Using the menu function
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, SECURITY and EASY
MENU.
EASY MENU consists of functions often used, and the other menus are classified
into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector
is displaying any menu, the MENU button on the projector works as the cursor
buttons. The basic operations of these menus are as follows.
INPUT button
ENTER button
MENU button
Cursor buttons
MENU
POSITION
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
M
A
G
N
I
F
Y
F
R
E
E
Z
E
PAGE
UP
VOLUME
ON
㧗
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
MENU
ENTER
1
2
POSITION
ENTER
RESET
ESC
RESET
ESC
MENU button
(Cursor buttons)
ESC button
RESET button
To start the MENU, press the MENU button. The MENU you last used (EASY
or ADVANCED) will appear. EASY MENU has priority to appear just after
powered on.
1.
2. In the EASY MENU
(1) Use the ▲/▼ cursor buttons to select an item to
operate. If you want to change it to the ADVANCED
MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
In the ADVANCED MENU
(1) Use the ▲/▼ cursor buttons to select a menu.
If you want to change it to the EASY MENU,
select the EASY MENU.
The items in the menu appear on the right side.
(2) Press the ► cursor button or ENTER button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
button or ENTER button to progress. The operation menu or dialog of the
selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
(continued on next page)
ViewSonic
ꢂꢁ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Using the menu function (continued)
To close the MENU, press the MENU button again or select EXIT and press
the ◄ cursor button or ENTER button. Even if you do not do anything, the
dialog will automatically disappear after about 30 seconds.
3.
●
If you want to move the menu position, use the cursor buttons after pressing the
POSITION button.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
● When you want to reset the operation, press RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE) cannot be
reset.
● In the ADVANCED MENU, when you want to return to the previous display,
press the ◄ cursor button or ESC button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication
EXIT
Meaning
Selecting this word finishes the OSD menu. It’s the same as
pressing the MENU button.
RETURN
Selecting this word returns the menu to the previous menu.
Selecting this word cancels the operation in the present
menu and returns to the previous menu.
CANCEL or NO
Selecting this word executes the prepared function or shifts
the menu to the next menu.
OK or YES
ViewSonic
ꢂꢂ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
EASY MENU
From the EASY MENU, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then
perform it according to the following table.
Item
Description
Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu.
ASPECT
Using the ◄/► buttons corrects the vertical keystone
distortion. See the KEYSTONE item in SETUP menu.
KEYSTONE
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
ó
ó
ó
DAYLIGHT
WHITEBOARD
BOARD(GREEN)
ó
ó
GAMMA
COLOR TEMP
2 MID
3 LOW
NORMAL
1 DEFAULT
2 DEFAULT
3 DEFAULT
4 DEFAULT
4 DEFAULT
5 DEFAULT
6 DEFAULT
CINEMA
DYNAMIC
PICTURE MODE
1 HIGH
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYLIGHT
4 Hi-BRIGHT-1
5 Hi-BRIGHT-2
2 MID
6 Hi-BRIGHT-3
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and
COLOR TEMP items in PICTURE menu.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
(continued on next page)
ViewSonic
ꢂ3
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Using the ◄/► buttons turns off/on the eco mode.
See the ECO MODE item in SETUP menu.
ECO MODE
Using the ◄/► buttons switches the mode for mirror status.
See the MIRROR item in SETUP menu.
MIRROR
RESET
Performing this item resets all of the EASY MENU items except the
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the
button performs resetting.
►
The usage time of the air filter is shown in the menu.
Performing this item resets the filter time which counts usage time
of the air filter.
FILTER TIME
LANGUAGE
A dialog is displayed for confirmation. Selecting the OK using the
button performs resetting.
►
See the FILTER TIME item in OPTION menu.
Using the ◄/► buttons changes the display language.
See the LANGUAGE item in SCREEN menu
.
Press the
►
or ENTER button to use the menu of PICTURE,
ADVANCED MENU
EXIT
IMAGE, INPUT, SETUP, SCREEN, OPTION or SECURITY.
Press the ◄ or ENTER button to finish the OSD menu.
ViewSonic
ꢂ4
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE menu
From the PICTURE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ◄/► buttons adjusts the brightness.
Dark Light
BRIGHTNESS
ó
Using the ◄/► buttons adjusts the contrast.
Weak Strong
CONTRAST
ó
Using the ▲/▼ buttons switches the gamma mode.
1 DEFAULT
6 CUSTOM
6 DEFAULT
1 CUSTOM
2 DEFAULT
2 CUSTOM
3 DEFAULT
3 CUSTOM
4 DEFAULT
5 CUSTOM
5 DEFAULT
4 CUSTOM
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then
pressing the ► button or the ENTER button displays a dialog to aid
you in adjusting the mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the ◄/► buttons,
and adjust the level using the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the
pattern changes as below.
GAMMA
No pattern Gray scale of 9 steps
ð
Ramp Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the test
pattern (Gray scale of 9 steps) except the darkest in the left end.
If you want to adjust the 2nd tone from left end on the test pattern,
use the equalizing adjustment bar “1”. The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• Lines or other noise might appear on the
screen when this function is operated, but it
is not a malfunction.
(continued on next page)
ViewSonic
ꢂ5
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Using the ▲/▼ buttons switches the color temperature mode.
1 HIGH
1 CUSTOM
2 MID
2 CUSTOM
6 CUSTOM
3 LOW
6 Hi-BRIGHT-3
5 CUSTOM
3 CUSTOM
5 Hi-BRIGHT-2
4 CUSTOM
4 Hi-BRIGHT-1
To adjust CUSTOM
Selecting a mode whose name
includes CUSTOM and then pressing
the ► button or the ENTER button
displays a dialog to aid you in adjusting
the OFFSET and GAIN of the selected
mode.
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
COLOR TEMP
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
ð
Ramp Gray scale of 15 steps
• Lines or other noise might appear on the screen
when this function is operated, but it is not a
malfunction.
Using the ◄/► buttons adjusts the strength of whole color.
Weak
Strong
ó
COLOR
TINT
• This item can be selected only for a video and component video
signal.
Using the ◄/► buttons adjusts the tint.
Reddish
Greenish
ó
• This item can be selected only for a video and component video
signal.
Using the ◄/► buttons adjusts the sharpness.
Weak
Strong
ó
SHARPNESS
• There may be some noise and/or the screen may flicker for a
moment when an adjustment is made. This is not a malfunction.
(continued on next page)
ViewSonic
ꢂ6
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
This projector has 4 memories for adjustment data (for all the items
of the PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or
ENTER button performs each function.
SAVE-ꢁ
SAVE-2
SAVE-3
SAVE-4
ó
ó
ó
ó
ó
LOAD-4 LOAD-3
LOAD-2
LOAD-1
ó
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function’s name.
• Remember that the current data being stored of a memory will be
lost by saving new data into the memory.
MY MEMORY
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function’s name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
• There may be some noise and the screen may flicker for a
moment when loading data. This is not malfunction.
• You can perform the LOAD function using MY BUTTONs. Please
see the MY BUTTON item in the OPTION menu.
ViewSonic
ꢂ7
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL
4:3
16:9
16:10
ó
ó
ó
For a video signal or component video signal
4:3 16:9 14:9
ASPECT
ó
ó
For no signal
4:3 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)
Large (It reduces picture)
ó
• This item can be selected only for a video and component video
signal.
OVER SCAN
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
Using the ◄/► buttons adjusts the vertical position.
Down
Up
ó
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the RESET button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal or component
video signal, the range of this adjustment depends on OVER SCAN
setting. It is not possible to adjust when the OVER SCAN is set to
10.
V POSITION
Using the ◄/► buttons adjusts the horizontal position.
Left
Right
ó
•
Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button when the H POSITION is
selected will reset the H POSITION to the default setting.
H POSITION
•
When this function is performed on a video signal or component video
signal, the range of this adjustment depends on OVER SCAN setting. It
is not possible to adjust when the OVER SCAN is set to 10.
(continued on next page)
ViewSonic
ꢂ8
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right
Left
ó
H PHASE
• This item can be selected only for a computer signal or a
component video signal.
Using the ◄/► buttons adjusts the horizontal size.
Small
Large
ó
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
by pressing the RESET button on the remote control during this
operation.
H SIZE
• Images might appear degraded when this function is operated, but
it is not a malfunction.
Selecting this item performs the automatic adjustment feature.
For a computer signal
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
For a video signal
The video format best suited for the respective input signal will be
selected automatically. This function is available only when the
AUTO is selected for the VIDEO FORMAT item in the INPUT menu.
The vertical position and horizontal position will be automatically set
to the default.
AUTO ADJUST
EXECUTE
For a component video signal
The vertical position, horizontal position and horizontal phase will
be automatically set to the default.
• The automatic adjustment operation requires approx. 10 seconds.
Also please note that it may not function correctly with some input.
• When this function is performed for a video signal, a certain extra
such as a line may appear outside a picture.
• When this function is performed for a computer signal, a black
frame may be displayed on the edge of the screen, depending on
the PC model.
• The items adjusted by this function may vary when the FINE or
DISABLE is selected for the AUTO ADJUST item of the SERVICE
item in the OPTION menu.
ViewSonic
ꢂ9
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ▲/▼ buttons switches the progress mode.
TV FILM OFF
ó
ó
• This function is performed only for the VIDEO input, and for
480i@60 or 576i@50 signal at the COMPUTER IN input.
• When the TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select OFF, even
though the screen image may lose sharpness.
PROGRESSIVE
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH
MID
LOW
ó
ó
VIDEO NR
• This function is performed only for the VIDEO input, and for
480i@60 or 576i@50 signal at the COMPUTER IN input.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the ▲/▼ buttons switches the mode for color space.
AUTO
RGB
SMPTE240
REC709
REC601
ó
ó
ó
ó
• This item can be selected only for a computer signal or a
component video signal.
COLOR SPACE
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except the AUTO.
(continued on next page)
ViewSonic
30
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Using the ◄/► buttons
switches the mode for video
format.
AUTO
NTSC
PAL
SECAM
ó
ó
ó
N-PAL
M-PAL
NTSC4.43
ó
ó
VIDEO FORMAT
• This item is performed only for a video signal from the VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
Use the ◄/► buttons to select
the computer input signal type.
AUTO
SYNC ON G OFF
ó
• Selecting the AUTO mode allows
you to input a sync on G signal or component video signal from the
port. To input component video signal to the projector, an RCA to
D-sub cable or adapter is required.
COMPUTER IN
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
Use the ◄/► buttons to turn the
frame lock function on/off .
ON
OFF
ó
• This item can be performed only on a signal with a vertical
frequency of 49 to 51Hz, 59 to 61 Hz.
FRAME LOCK
• When ON is selected, moving pictures are displayed more
smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select OFF.
(continued on next page)
ViewSonic
3ꢁ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
The resolution for the COMPUTER IN input signals can be set on
this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼
buttons and press the ► button.
The RESOLUTION menu will be
displayed.
(2) In the RESOLUTION menu select the
resolution you wish to display using
the ▲/▼ buttons.
Selecting AUTO will set a resolution
appropriate to the input signal.
(3) Pressing the ► or ENTER button when
selecting a STANDARD resolution will
automatically adjust the horizontal and
STANDARD
vertical positions, clock phase and
horizontal size.
↓
The INPUT_INFORMATION dialog will be
displayed.
(4) To set a custom resolution use the ▲/▼ buttons to select
the CUSTOM and the RESOLUTION_CUSTOM box will be
RESOLUTION
displayed.
CUSTOM
Set the horizontal (HORZ) and
↓
vertical (VERT) resolutions using
the ▲/▼/◄/► buttons.
This function may not support all
resolutions.
(5) Move the cursor to OK on screen and press the ► or ENTER
button. The message “ARE YOU SURE YOU WISH TO
CHANGE RESOLUTION?” appears. To save the setting, press
the ► button.
The horizontal and vertical positions, clock phase and horizontal
size will be automatically adjusted.
The INPUT_INFORMATION dialog
will be displayed.
(6) To revert back to the previous resolution without saving
changes, move the cursor to CANCEL on screen and press the
◄ or ENTER button.
The screen will then return to the RESOLUTION menu
displaying the previous resolution.
• For some pictures, this function may not work well.
ViewSonic
3ꢂ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP menu
From the SETUP menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image Shrink the top of the image
ó
KEYSTONE
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
Using the ▲/▼ buttons turns off/on the eco mode.
NORMAL
ECO
ó
ECO MODE
MIRROR
• When the ECO is selected, acoustic noise and screen brightness
are reduced.
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL
H:INVERT
V:INVERT
H&V:INVERT
ó
ó
ó
ViewSonic
33
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN menu
From the SCREEN menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
Description
Using the ▲/▼/◄/► buttons switches the OSD (On Screen
Display) language.
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ó
ó
ó
LANGUAGE
(shown in the LANGUAGE dialog)
Press the ENTER or INPUT button to save the language setting.
Using the ▲/▼/◄/► buttons adjusts the menu position.
MENU POSITION To quit the operation, press the MENU button on the remote control
or keep no operation for about 10 seconds.
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature. It
is displayed by pressing the BLANK button on the remote control.
MyScreen
ORIGINAL
BLUE
WHITE
BLACK
ó
ó
ó
ó
BLANK
MyScreen : Screen can be registered by the MyScreen item.
ORIGINAL : Screen preset as the standard screen.
BLUE, WHITE, BLACK : Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the plain black screen after several minutes.
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen
ORIGINAL
OFF
ó
ó
MyScreen : The screen can be registered by the MyScreen item
ORIGINAL : The screen preset as the standard screen.
OFF : Plain black screen.
.
START UP
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen after several minutes. If
also the BLANK screen is the MyScreen or ORIGINAL, the plain
black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu, the START UP is fixed to the MyScreen.
(continued on next page)
ViewSonic
34
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
This item allows you to capture an image for use as a MyScreen
image which can be used as the BLANK screen and START UP
screen. Display the image you want to capture before executing the
following procedure.
1. Selecting this item displays a dialog
titled “MyScreen”. It will ask you if
you start capturing an image from
the current screen.
Please wait for the target image to be displayed, and press the
ENTER or INPUT button when the image is displayed. The image
will freeze and the frame for capturing will appear.
To stop performing, press the RESET button on the remote
control.
2. Using the ▲/▼/◄/► buttons adjusts
the frame position.
Please move the frame to the position
of the image which you want to use. The
frame may not be able to be moved for
some input signals.
MyScreen
To start registration, press the ENTER
or INPUT button on the remote control.
To restore the screen and return to the previous dialog, press the
RESET button on the remote control.
Registration takes several minutes.
When the registration is completed, the registered screen and the
following message is displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed:
“A capturing error has occurred. Please try again.”
• This function cannot be selected when the ON is selected to the
MyScreen Lock item.
• This function cannot be selected when the ON is selected to the
MyScreen PASSWORD item in the SECURITY menu.
(continued on next page)
ViewSonic
35
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Using the ▲/▼ buttons turns on/off the MyScreen lock function.
ON
OFF
ó
When the ON is selected, the item MyScreen is locked. Use this
function for protecting the current MyScreen.
MyScreen Lock
• This function cannot be selected when the ON is selected to the
MyScreen PASSWORD item in the SECURITY menu.
Using the ▲/▼ buttons turns on/off the message function.
ON
OFF
ó
When the ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ.”
“NOT AVAILABLE”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of “FREEZE” and “II” while freezing the screen by
pressing the FREEZE button.
MESSAGE
The indication of the TEMPLATE displayed by changing.
• When the OFF is selected, please remember if the picture is
frozen. Do not mistake freezing for a malfunction.
(continued on next page)
ViewSonic
36
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN menu to select the
SOURCE NAME and press the ► or ENTER button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be
named and press the ► button. Right
side of the menu is blank until a name is
specified.
The SOURCE NAME dialog will be
displayed.
(3) The current name will be displayed on
the first line. Use the ▲/▼/◄/► buttons
and the ENTER or INPUT button to
select and enter characters. To erase 1
character at one time, press the RESET
button or press the ◄ and INPUT button
at the same time. Also if you move the
cursor to DELETE or ALL CLEAR on
screen and press the ENTER or INPUT
button, 1 character or all characters will
be erased. The name can be a maximum
of 16 characters.
SOURCE NAME
(4) To change an already inserted character,
press the ▲ button to move the cursor to
the first line, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is
selected. Then, follow the same procedure as described at the
item (3) above.
(5) To finish entering text, move the cursor to the OK on screen and
press the ►, ENTER or INPUT button. To revert to the previous
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄, ENTER or INPUT button.
Using the ▲/▼ buttons switches the mode for the template screen.
Press the ► button to display the selected template, and press
the ◄ button to close the displayed screen.
The last selected template is displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed.
TEMPLATE
TEST PATTERN
DOT-LINE1
ó
DOT-LINE4
DOT-LINE3
DOT-LINE2
ó
ó
(continued on next page)
ViewSonic
37
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
The C.C. is the function that displays a
transcript or dialog of the audio portion of
a video, files or other presentation or other
relevant sounds. It is required to have NTSC
format video or 480i@60 format component
video source supporting C.C. feature to
utilize this function.
It may not work properly, depending on equipment or signal source.
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from following options
using ▲/▼ buttons.
ON
OFF
ó
ON : Closed Caption is on.
OFF : Closed Caption is off.
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue,
narration, and / or sound effects of a television program or other
video sources. The Closed Caption availability is depending upon
broadcaster and/or content.
C.C.
MODE
(Closed Caption)
Select Closed Caption MODE setting from following options using
▲/▼ buttons.
CAPTIONS
TEXT
ó
CAPTIONS : Display Closed Caption.
TEXT : Display Text data, which is for additional information such
as news reports or a TV program guide. The information
covers the entire screen. Not all of the C.C. program has
Text information.
CHANNEL
Select Closed Caption CHANNEL from following options using ▲
/▼ buttons.
1
2
3
4
ó
ó
ó
ꢁ: Channel 1, primary channel / language
ꢂ: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some
channel might be used for secondary language or empty.
ViewSonic
38
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION menu
From the OPTION menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item, except for the items LAMP TIME
and FILTER TIME. Then perform it according to the
following table
Item
Description
Using the ▲/▼ buttons turns on/off the automatic signal search
function.
ON
OFF
ó
When the ON is selected, detecting no signal automatically cycles
through input ports in the following order. The search is started from
the current port. Then when an input is found, the projector will stop
searching and display the image.
AUTO SEARCH
COMPUTER IN
VIDEO
ó
Using the ▲/▼ buttons turns on/off the DIRECT ON function.
ON OFF
ó
When set to the ON, the lamp in projector will be automatically
turned on without the usual procedure, only when the projector is
supplied with the power after the power was cut while the lamp was
on.
DIRECT ON
• This function does not work as long as the power has been
supplied to the projector while the lamp is off.
•
After turning the lamp on by the DIRECT ON function, if neither
input nor operation is detected for about 30 minutes, the projector is
turned off, even though the AUTO OFF function is disabled.
(continued on next page)
ViewSonic
39
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Using the ▲/▼ buttons adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes)
Short (min. 0 minute = DISABLE)
ó
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
AUTO OFF
If one of the projector’s buttons or the remote control buttons is
pressed during the corresponding time, projector will not be turned
off.
Please refer to the section “Turning off the power”.
The lamp time is the usage time of the lamp, counted after the last
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp time, select the OK using the ► button.
LAMP TIME
CANCEL OK
ð
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section “Replacing the lamp”.
The filter time is the usage time of the air filter, counted after the last
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the filter time, select the OK using the ► button.
FILTER TIME
CANCEL OK
ð
•
Please reset the filter time only when you have cleaned or replaced
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section “Cleaning and replacing
the air filter”.
(continued on next page)
ViewSonic
40
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
This item is to assign one of the following functions to the MY
BUTTON 1/2 on the remote control.
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a
MY BUTTON - (1/2) and press the ► button to display the MY
BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or INPUT
button to save the setting.
• COMPUTER IN: Sets port to COMPUTER IN.
• VIDEO: Sets port to the VIDEO.
• INFORMATION: Displays the INPUT_INFORMATION or the
SYSTEM_INFORMATION or nothing.
• MY MEMORY: Loads one of adjustment data stored.
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
MY BUTTON
dialog “No saved data” appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the
current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE.
• FILTER RESET: Displays the filter time reset confirmation
dialogue.
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item appear or disappear.
U
sing ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote
control.
Select the picture input that is connected with a document camera.
MY SOURCE
COMPUTER IN
VIDEO
ó
(continued on next page)
ViewSonic
4ꢁ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Selecting this item displays the SERVICE
menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to execute
the item.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed of the cooling
fans. The HIGH is the mode for use at highlands etc. Note that the
projector is noisier when the HIGH is selected.
HIGH
NORMAL
ó
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the
DISABLE is selected, the automatic adjustment feature is disabled.
FINE
FAST
DISABLE
ó
ó
FINE: Finer tuning including H.SIZE adjustment.
FAST: Faster tuning, setting H.SIZE to prearranged data for the
input signal.
• Depending on conditions, such as input image, signal cable to
the projector, environment around the projector, etc., the automatic
adjustment may not work correctly. In such a case, please
choose DISABLE to disable the automatic adjustment, and make
adjustment manually.
SERVICE
GHOST
1. Select a color element of ghost using
the ◄/► buttons.
2. Adjust the selected element using the ▲
/▼ buttons to disappear ghost.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message
when to replace the filter unit
100h
200h
500h
1000h
2000h
5000h
OFF
ó
ó
ó
ó
ó
ó
After choosing an item except OFF, the message “REMINDER
***HRS PASSED .....” will appear after the timer reaches the interval
time set by this feature.
When the OFF is chosen, the message will not appear. Utilize
this feature to keep the air filter clean, setting the suitable time
according to your environment of this projector.
• Please take care of the filter unit periodically, even if there is
no message. If the air filter becomes to be blocked by dust or
other matter, the internal temperature will rise, which could cause
malfunction, or reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector
and the condition of the filter unit.
(continued on next page)
ViewSonic
4ꢂ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When ON
is selected, the buttons on the projector except the STANDBY/ON
button are locked.
ON
OFF
ó
• Please use this function to prevent tampering or accidental
operation. This function does not have any effect on the remote
control.
REMOTE FREQ.
(1) Use the ▲/▼ button to change the projector’s remote sensor
frequency setting.
1:NORMAL
2:HIGH
ó
(2) Use the ◄/► button to change the projector’
s remote sensor on or off.
ON
OFF
ó
The factory default setting is for both 1:NORMAL and 2:HIGH to be
on. If the remote control does not function correctly, disable either
of them.
SERVICE
(continued)
It's not possible to disable both options at the same time.
INFORMATION
Selecting this item displays a dialog titled
“INPUT_INFORMATION”. It shows the information
about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock
function is working.
• This item can’t be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT
is displayed together with the input information in the
INPUT_INFORMATION box.
FACTORY RESET
Selecting OK using the ► button performs this function. By this
function, all the items in all of menus will collectively return to the
initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE, FILTER MESSAGE and SECURITY settings are not
reset.
CANCEL OK
ð
ViewSonic
43
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURITY menu
This projector is equipped with security functions.
From the SECURITY menu, items shown in the table
below can be performed.
To use SECURITY menu: User registration is required
before using the security functions.
Enter the SECURITY menu
1. Use the ▲/▼ buttons on the SECURITY menu to select ENTER PASSWORD and press the ►
button. The ENTER PASSWORD box will be displayed.
2. Use the ▲/▼/◄/► buttons to enter the registered password. The
factory default password is 2578. This password can be changed.
Move the cursor to the right side of the ENTER PASSWORD box
and press the ► button to display the SECURITY menu.
• It is strongly recommended the factory default password to be
changed as soon as possible.
• If an incorrect password is input, the ENTER PASSWORD box
will be displayed again. If incorrect password is input 3 times, the
projector will turn off. Afterwards the projector will turn off every time
an incorrect password is input.
3. Items shown in the table below can be performed.
If you have forgotten your password
(1). While the ENTER PASSWORD box is displayed, press and hold
the RESET button on the remote control for about 3 seconds or
press and hold the INPUT button for 3 seconds while pressing the
► button on the projector.
(2). The 10 digit Inquiring Code will be displayed. Contact your dealer
with the 10 digit Inquiring Code. Your password will be sent after
your user registration information is confirmed.
• If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will
close. If necessary, repeat the process from (1).
Item
Description
(1) Use the ▲/▼ buttons on the SECURITY
menu to select SECURITY PASSWORD
CHANGE and press the ► button to display
the ENTER NEW PASSWORD box.
(2) Use the ▲/▼/◄/► buttons to enter the new password.
(3) Move the cursor to the right side of
the ENTER NEW PASSWORD box and
press the ► button to display the NEW
PASSWORD AGAIN box, enter the same
password again.
(4) Move the cursor to the right side of the
NEW PASSWORD AGAIN box and press the
► button and the NOTE NEW PASSWORD
box will be displayed for about 30 seconds,
please make note of the password during
this time.
SECURITY
PASSWORD
CHANGE
Pressing the ENTER button on the remote control or
►
button on the
projector will close the NOTE NEW PASSWORD box.
• Please do not forget your password.
(continued on next page)
ViewSonic
44
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
The MyScreen PASSWORD function can be used to prohibit access to the
MyScreen function and prevent the currently registered MyScreen image
from being overwritten.
1 Turning on the MyScreen PASSWORD
1-1 Use the ▲/▼ buttons on the SECURITY menu
to select MyScreen PASSWORD and press the
► button to display the MyScreen PASSWORD
on/off menu.
1-2 Use the ▲/▼ buttons on the MyScreen
PASSWORD on/off menu to select ON.
The ENTER NEW PASSWORD box (small)
will be displayed.
ENTER NEW PASSWORD
box (small)
1-3 Use the ▲/▼/◄/► buttons to enter the
password. Move the cursor to the right side
of the ENTER NEW PASSWORD box (small)
and press the ► button to display the NEW
PASSWORD AGAIN box, enter the same
PASSWORD again.
1-4 Move the cursor to the right side of the
NEW PASSWORD AGAIN box and press
the ► button to display the NOTE NEW
PASSWORD box for about 30 seconds,
please make note of the password during
this time.
Pressing the ENTER button on the remote control or ► button on the
MyScreen
PASSWORD
projector will return to MyScreen PASSWORD on/off menu.
When a password is set for MyScreen:
The MyScreen registration function (and menu) will be unavailable.
The MyScreen Lock menu will be unavailable.
The START UP setting will be locked on MyScreen (and the menu will be
•
•
•
unavailable).
Turning the MyScreen PASSWORD off will allow normal operation of these
functions.
Please do not forget your MyScreen PASSWORD.
•
2 Turning off the MyScreen PASSWORD
2-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off
menu.
2-2 Select OFF to display the ENTER
PASSWORD box (large). Enter the registered
password and the screen will return to the
MyScreen PASSWORD on/off menu.
ENTER PASSWORD box
(large)
If an incorrect PASSWORD is input, the menu will
close. If necessary, repeat the process from 2-1.
3 If you have forgotten your password
3-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off
menu.
3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit
Inquiring Code will be displayed inside the box.
3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will
be sent after your user registration information is confirmed.
(continued on next page)
ViewSonic
45
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
PIN LOCK is a function which prevents the projector from being used unless
a registered Code is input.
1 Turning on the PIN LOCK
1-1 Use the ▲/▼ buttons on the SECURITY menu to
select PIN LOCK and press the ► button or the
ENTER button to display the PIN LOCK on/off
menu.
1-2 Use the ▲/▼ buttons on the PIN LOCK
on/off menu to select ON and the Enter PIN
Code box will be displayed.
1-3 Input a 4 part PIN code using the ▲/▼/◄/►,
COMPUTER or INPUT button.
The PIN Code again box will appear. Reenter
the same PIN code. This will complete the PIN
code registration.
If there is no key input for about 55 seconds
while the Enter PIN Code box or the PIN Code again box is displayed,
the menu will close. If necessary, repeat the process from 1-1.
•
Afterwards, anytime the projector is restarted after AC power is turned off
the Enter PIN Code box will be displayed. Enter the registered PIN code.
The projector can be used after entering the registered PIN code. If an
incorrect PIN code is input, the Enter PIN code box will be displayed again.
If an incorrect PIN Code is input 3 times, the projector will turn off.
Afterwards the projector will turn off every time an incorrect PIN code is
input. The projector will also turn off if there is no key input for about 5
minutes while the Enter PIN code box is displayed.
PIN LOCK
This function will activate only when the projector is started after AC power
is turned off.
Please do not forget your PIN code.
•
2 Turning off the PIN LOCK
2-1 Follow the procedure in 1-1 to display the PIN LOCK on/off menu.
2-2 Use the ▲/▼ buttons to select OFF and the Enter PIN Code box will be
displayed.
Enter the registered PIN code to turn the PIN LOCK function off.
If an incorrect PIN Code is input 3 times, the menu will close.
3 If you have forgotten your PIN Code
3-1 While the Enter PIN Code box is displayed, press and hold the RESET
button for three seconds or press and hold the INPUT button for 3
seconds while pressing the ► button on the projector.
The 10 digit Inquiring Code will be displayed.
If there is no key input for about 5 minutes
while the Inquiring Code is displayed, the
•
projector will turn off.
3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN Code will
be sent after your user registration information is confirmed.
(continued on next page)
ViewSonic
46
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
The MY TEXT PASSWORD function can prevent the MY TEXT from being
overwritten. When the password is set for the MY TEXT;
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit
changing the DISPLAY setting.
• The MY TEXT WRITING menu will be unavailable, which can prevent the
MY TEXT from being overwritten.
1 Turning on the MY TEXT PASSWORD
1-1 Use the ▲/▼ buttons on the SECURITY menu to
select the MY TEXT PASSWORD and press the
► button to display the MY TEXT PASSWORD
on/off menu.
1-2 Use the ▲/▼ buttons on the MY TEXT
PASSWORD on/off menu to select ON. The
ENTER NEW PASSWORD box (small) will
be displayed.
1-3 Use the ▲/▼/◄/► buttons to enter the
password. Move the cursor to the right side
of the ENTER NEW PASSWORD box (small)
and press the ► button to display the NEW
PASSWORD AGAIN box, and then enter the
same password again.
ENTER NEW PASSWORD
box (small)
1-4 Move the cursor to the right side of the
NEW PASSWORD AGAIN box and press
► button to display the NOTE NEW
PASSWORD box for about 30 seconds,
then please make note of the password
during this time.
MY TEXT
PASSWORD
Pressing the ENTER button on the remote control or ► button on the
projector will return to the MY TEXT PASSWORD on/off menu.
2 Turning off the MY TEXT PASSWORD
2-1 Follow the procedure in 1-1 to display the MY TEXT PASSWORD on/off
menu.
2-2 Select OFF to display the ENTER
PASSWORD box (large). Enter the
registered password and the screen will
return to the MY TEXT PASSWORD on/off
menu.
ENTER PASSWORD box
(large)
If an incorrect password is input, the menu will
close. If necessary, repeat the process from 2-1
3 If you have forgotten your password
3-1 Follow the procedure in 1-1 to display the MY TEXT PASSWORD on/off
menu.
3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit
inquiring code will be displayed inside the box.
3-3 Contact your dealer with the 10 digit inquiring code. Your password will
be sent after your user registration information is confirmed.
(continued on next page)
ViewSonic
47
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
(1) Use the ▲/▼ buttons on the SECURITY menu to
select the MY TEXT DISPLAY and press the ►
button to display the MY TEXT DISPLAY on/off
menu.
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to
select on or off.
ON
OFF
ó
MY TEXT
DISPLAY
When it is set ON, the MY TEXT will be
displayed on the START UP screen and the
INPUT_INFORMATION when the INFORMATION
on the SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
(1) Use the ▲/▼ buttons on the
SECURITY menu to select the MY
TEXT WRITING and press the ►
button. The MY TEXT WRITING
dialog will be displayed.
(2) The current MY TEXT will be
displayed on the first 3 lines. If not
yet written, the lines will be blank.
Use the ▲/▼/◄/► buttons and the
ENTER or INPUT button to select and
enter characters. To erase 1 character
at one time, press the RESET button
or press the ◄ and INPUT button at
the same time. Also if you move the
cursor to DELETE or ALL CLEAR on
screen and press the ENTER or INPUT
button, 1 character or all characters will
be erased. The MY TEXT can be input
up to 24 characters on each line.
MY TEXT
WRITING
(3) To change an already inserted
character, press the ▲/▼ button to
move the cursor to one of the first 3
lines, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and press
the ►, ENTER or INPUT button. To revert to the previous MY TEXT
without saving changes, move the cursor to the CANCEL on screen and
press the ◄, ENTER or INPUT button.
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
•
ViewSonic
48
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Replacing the lamp
A lamp has finite product life. Using the lamp for long periods of time could cause
the pictures darker or the color tone poor. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare
a new lamp, make contact with your dealer and tell the lamp type number.
Type number : RLC-054 (DT01026)
lamp cover
3
Replacing the lamp
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.
1.
Prepare a new lamp. If the projector is mounted on
a ceiling, or if the lamp has broken, also ask the
dealer to replace the lamp.
2.
In case of replacement by yourself, follow the following procedure.
Loosen the screw (marked by arrow) of the lamp
cover and then slide and lift the lamp cover to the
side to remove it.
3.
Loosen the 3 screws (marked by arrow) of the lamp,
and slowly pick up the lamp by the handles. Never
loosen any other screws.
4.
4
Handles
Insert the new lamp, and retighten firmly the 3
screws of the lamp that are loosened in the previous
process to lock it in place.
5.
6.
7.
While putting the interlocking parts of the lamp cover
and the projector together, slide the lamp cover back in
place. Then firmly fasten the screw of the lamp cover.
Turn the projector on and reset the lamp time using
the LAMP TIME item in the OPTION menu.
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using
the ▼/▲ button, then press the ► button.
6
(3) Point at the OPTION in the left column of the menu
using the ▼/▲ button, then press the ► button.
(4) Point at the LAMP TIME using the ▼/▲ button, then press the ► button. A dialog will appear.
(5) Press the ► button to select “OK” on the dialog. It performs resetting the lamp time.
CAUTION ►Do not touch any inner space of the projector, while the lamp
is taken out.
NOTE • Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
ViewSonic
49
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the lamp (continued)
Lamp warning
HIGH TEMPERATURE
HIGH PRESSURE
HIGH VOLTAGE
WARNING ►The projector uses a high-pressure mercury glass lamp. The
lamp can break with a loud bang, or burn out, if jolted or scratched, handled
while hot, or worn over time. Note that each lamp has a different lifetime, and
some may burst or burn out soon after you start using them. In addition, when
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and
for gas containing mercury to escape from the projector’s vent holes.
►About disposal of a lamp: This product contains a mercury lamp; do not put
it in a trash. Dispose of it in accordance with environmental laws.
• For product disposal, consult your local government agency
For more information, call your dealer.
• If the lamp should break (it will make a loud bang when it does),
unplug the power cord from the outlet, and make sure to request a
replacement lamp from your local dealer. Note that shards of glass
could damage the projector’s internals, or cause injury during handling,
so please do not try to clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does),
Disconnect
the plug
from the
power
ventilate the room well, and make sure not to breathe the gas that
comes out of the projector vents, or get it in your eyes or mouth.
• Before replacing the lamp, turn the projector off and unplug the power
outlet
cord, then wait at least 45 minutes for the lamp to cool sufficiently.
Handling the lamp while hot can cause burns, as well as damaging the lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp cover while the projector is suspended from
a ceiling. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in
high places is dangerous, so ask your local dealer to have the lamp
replaced even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. At the lamp
replacing, make sure that the screws are screwed in firmly. Loose
screws could result in damage or injury.
• Use only the lamp of the specified type.
• If the lamp breaks soon after the first time it is used, it is possible
that there are electrical problems elsewhere besides the lamp. If this
happens, consult your local dealer or a service representative.
•
Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• Using the lamp for long periods of time, could cause it dark, not to light
up or to burst. When the pictures appear dark, or when the color tone is
poor, please replace the lamp as soon as possible. Do not use old (used)
lamps; this is a cause of breakage.
ViewSonic
50
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and replacing the air filter
Please check and clean the air filter periodically. When the indicators or a
message prompts you to clean the air filter, comply with it as soon as possible.
Replace the air filter when it is damaged or heavily soiled. To prepare a new air
filter, make contact with your dealer and tell the air filter type number.
When you replace the lamp, please replace the air filter. An air filter of specified
type will come together with a replacement lamp for this projector.
Filter cover
Turn the projector off, and unplug the power cord.
Allow the projector to sufficiently cool down.
2
3
1.
2. Use a vacuum cleaner on and around the filter cover.
While supporting the projector with one hand, use
3.
your other hand to pull the filter cover forward in the
direction of the arrow.
Use a vacuum cleaner for the filter vent of the
projector and the outer side of the filter unit.
4.
Take the filter out pulling the filter’s knob up while
holding the filter cover.
Use a vacuum cleaner on both sides of the filter.
If the filter is damaged or heavily soiled, replace it
with the new one.
5.
Filter unit
4
6.
7. Put the filter back into the filter cover.
Filter cover
8. Put the filter unit back into the projector.
7
Turn the projector on and reset the filter time using
9.
the FILTER TIME item in the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the FILTER TIME using the ▼/▲ button,
then press the ► button. A dialog will appear.
(3) Press the ► button to select “OK” on the dialog.
It performs resetting the filter time.
Knob
Filter
(continued on next page)
ViewSonic
5ꢁ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and replacing the air filter (continued)
WARNING ►Before taking care of the air filter, make sure the power cable
is not plugged in, then allow the projector to cool sufficiently. Taking care of the
air filter in a high temperature state of the projector could cause an electric shock,
a burn or malfunction to the projector.
►Use only the air filter of the specified type. Do not use the projector without the
air filter or the filter cover. It could result in a fire or malfunction to the projector.
►Clean the air filter periodically. If the air filter becomes clogged by dust or the
like, internal temperatures rise and could cause a fire, a burn or malfunction to
the projector.
NOTE • Please replace the air filter when it is damaged or too soiled.
• When you replace the projection lamp, please replace the air filter. An air filter
of specified type will come together with a replacement lamp for this projector.
• Please reset the filter time only when you have cleaned or replaced the air
filter, for a suitable indication about the air filter.
• The projector may display the message such as “CHECK THE AIR FLOW” or
turn off the projector, to prevent the internal heat level rising.
ViewSonic
5ꢂ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Other care
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and
inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display
quality. Please take care of the lens, being cautious of handling.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
1.
After making sure that the projector is cool adequately, lightly wipe the lens
with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint,
etc.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
1.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner
diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a
soft, dry cloth.
2.
WARNING ►Before caring, make sure the power cord is not plugged in,
and then allow the projector to cool sufficiently. The care in a high temperature
state of the projector could cause a burn and/or malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so
dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in
a fire, an electric shock, and/or malfunction to the projector.
• Do not put anything containing water, cleaners or chemicals near the projector.
• Do not use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the
following. Incorrect care could cause not only an injury but adverse influence
such as discoloration, peeling paint, etc.
►Do not use cleaners or chemicals other than those specified in this manual.
►Do not polish or wipe with hard objects.
ViewSonic
53
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If an abnormal operation should occur, stop using the projector immediately.
WARNING ►Never use the projector if abnormal operations such as smoke, strange odor,
excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter,
etc. should occur. In such cases, immediately disconnect the power plug from the power outlet. After
making sure that the smoke or odor has stopped, contact to your dealer or service company.
Otherwise if a problem occurs with the projector, the following checks and measures are
recommended before requesting repair.
If this does not resolve the problem, please contact your dealer or service company. They
will tell you what warranty condition is applied.
Related messages
When some message appears, check and cope with it according to the following table.
Although these messages will be automatically disappeared around several minutes, it will
be reappeared every time the power is turned on.
Message
Description
There is no input signal.
Please confirm the signal input connection, and the status
of the signal source.
The horizontal or vertical frequency of the input
signal is not within the specified range.
Please confirm the specs for your projector or the signal source specs.
An improper signal is input.
Please confirm the specs for your projector or the signal source specs.
The internal temperature is rising.
Please turn the power off, and allow the projector to cool
down at least 20 minutes. After having confirmed the
following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please set
FAN SPEED of the SERVICE item in the OPTION menu to HIGH.
A note of precaution when cleaning the air filter.
Please immediately turn the power off, and clean or change
the air filter referring to the “Cleaning and replacing the
air filter” section of this manual. After you have cleaned or
changed the air filter, please be sure to reset the filter timer.
The button operation is not available with following
condition.
One of the invalid buttons on the remote control was
pressed.
ViewSonic
54
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Regarding the indicator lamps
When operation of the LAMP, TEMP and POWER indicators differs from usual,
check and cope with it according to the following table.
POWER
indicator indicator indicator
LAMP
TEMP
Description
Lighting
In Orange
Turned
off
Turned
off
The projector is in a standby state.
Please refer to the section “Power on/off”.
Blinking
In Green
Turned
off
Turned
off
The projector is warming up.
Please wait.
Lighting
In Green
Turned
off
Turned
off
The projector is in an on state.
Ordinary operations may be performed.
Blinking
In Orange
Turned
off
Turned
off
The projector is cooling down.
Please wait.
The projector is cooling down. A certain error
has been detected.
Please wait until POWER indicator finishes blinking,
and then perform the proper measure using the item
descriptions below.
Blinking
In Red
(discre- (discre-
tionary) tionary)
The lamp does not light, and there is a possibility
that interior portion has become heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
sufficiently cooled down, please make confirmation of
Blinking
In Red
or
Lighting
In Red
Lighting Turned the following items, and then turn the power on again.
In Red
off
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy,
please change the lamp referring to the section
“Replacing the lamp”.
The lamp cover has not been properly fixed.
Please turn the power off, and allow the projector to
cool down at least 45 minutes. After the projector has
Blinking
In Red
or
Lighting
In Red
Blinking Turned sufficiently cooled down, please make confirmation of
In Red
off
the attachment state of the lamp cover. After performing
any needed maintenance, turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
The cooling fan is not operating.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
Turned Blinking sufficiently cooled down, please make confirmation
Blinking
In Red
or
Lighting
In Red
off
In Red that no foreign matter has become caught in the fan,
etc., and then turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
(Continued on next page)
ViewSonic
55
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Regarding the indicator lamps (continued)
POWER
indicator indicator indicator
LAMP
TEMP
Description
There is a possibility that the interior portion
has become heated.
Please turn the power off, and allow the projector to cool down at least
20 minutes. After the projector has sufficiently cooled down, please make
Turned Lighting confirmation of the following items, and then turn the power on again.
Blinking
In Red
or
Lighting
In Red
off
In Red • Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please set FAN
SPEED of SERVICE item in OPTION menu to HIGH
.
It is time to clean the air filter.
Please immediately turn the power off, and clean or
change the air filter referring to the section “Cleaning
and replacing the air filter”. After cleaning or changing
the air filter, please be sure to reset the filter timer.
After the remedy, reset the power to ON.
Lighting
In Green
Simultaneous
blinking in Red
There is a possibility that the interior portion
has become overcooled.
Please use the unit within the usage temperature
parameters (5°C to 35°C).
Lighting
In Green
Alternative
blinking in Red
After the treatment, reset the power to ON.
NOTE
•
When the interior portion has become overheated, for safety
purposes, the projector is automatically shut down, and the indicator lamps
may also be turned off. In such a case, disconnect the power cord, and wait at
least 45 minutes. After the projector has sufficiently cooled down, please make
confirmation of the attachment state of the lamp and lamp cover, and then turn
the power on again.
Shutting the projector down
Shutdown switch
Only when the projector can not be turned off by usual
procedure, please push the shutdown switch using a pin
or similar, and disconnect the power plug from the power
outlet. Before turning it on again, wait at least 10 minutes
to make the projector cool down enough.
Resetting all settings
When it is hard to correct some wrong settings, the FACTORY RESET function
of SERVICE item in OPTION menu can reset all settings (except LANGUAGE,
FILTER TIME, LAMP TIME, FILTER MESSAGE and SECURITY settings and etc.)
to the factory default.
ViewSonic
56
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it
according to the following table.
Reference
page
Phenomenon
Cases not involving a machine defect
The electrical power cord is not plugged in.
Correctly connect the power cord.
ꢁꢁ
The main power source has been interrupted during
operation such as by a power outage (blackout), etc.
Please disconnect the power plug from the power outlet,
and allow the projector to cool down at least 10 minutes,
then turn the power on again.
11, 14
49, 50
Power does not
come on.
Either there is no lamp and/or lamp cover, or either
of these has not been properly fixed.
Please turn the power off and disconnect the power plug from
the power outlet, and allow the projector to cool down at least
45 minutes. After the projector has sufficiently cooled down,
please make confirmation of the attachment state of the lamp
and lamp cover, and then turn the power on again.
The signal cables are not correctly connected.
Correctly connect the connection cables.
9
–
Signal source does not correctly work.
Correctly set up the signal source device by referring to the
manual of the source device.
The input changeover settings are mismatched.
Select the input signal, and correct the settings.
ꢁ5
ꢂ5
No pictures are
displayed.
The brightness is adjusted to an extremely low level.
Adjust BRIGHTNESS to a higher level using the menu
function.
The computer cannot detect the projector as a plug
and play monitor.
Make sure that the computer can detect a plug and play
monitor using another plug and play monitor.
ꢁ0
ꢂ0
The BLANK screen is displayed.
Press the BLANK button on the remote control.
(Continued on next page)
ViewSonic
57
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Phenomena that may be easy to be mistaken for machine defects (continued)
Reference
page
Phenomenon
Cases not involving a machine defect
The FREEZE function is working.
Video screen
display freezes.
ꢂ0
Press the FREEZE button to restore the screen to normal.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR
TEMP, COLOR, TINT and/or COLOR SPACE settings,
using the menu functions.
Colors have a
faded- out
appearance, or
Color tone is
poor.
26, 30
30
COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB,
SMPTE240, REC709 or REC601.
The brightness and/or contrast are adjusted to an
extremely low level.
Adjust BRIGHTNESS and/or CONTRAST settings to a
higher level using the menu function.
ꢂ5
The ECO MODE function is working.
Select NORMAL for the ECO MODE item in the SETUP
menu.
Pictures appear
dark.
33
The lamp is approaching the end of its product
lifetime.
49, 50
Replace the lamp.
Either the focus and/or horizontal phase settings are
not properly adjusted.
Adjust the focus using the focus ring, and/or H PHASE
using the menu function.
17, 29
Pictures appear
blurry.
The lens is dirty or misty.
Clean the lens referring to the section “Caring for the lens”.
53
NOTE • Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and it does not constitute or
imply a machine defect.
ViewSonic
58
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specification
Item
Specification
Product name
Liquid Crystal Panel
Lens
Liquid crystal projector
786,432 pixels (1024 horizontal x 768 vertical)
Zoom lens, f = 19 ~ 22 mm (approximately)
190W UHP
Lamp
Power supply
Power consumption
Temperature range
AC 100-120V/3.0A, AC220-240V/1.5A
250W
5 ~ 35°C (Operating)
317 (W) x 98 (H) x 288 (D) mm
* Not including protruding parts. Please refer to the following figure.
Size
Weight (mass)
approx. 3.2kg
Computer input port
COMPUTER IN ..................................D-sub 15 pin mini x1
Video input port
Ports
VIDEO ..................................................................... RCA x1
Lamp: RLC-054 (DT01026)
Air filter: For more information, please consult your dealer.
Optional parts
ViewSonic
59
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (continued)
317
214
103
[UNIT:mm]
CEILING MOUNT SURFACE
30
LENS CENTER
M4 INSERT NUT
A-A
5:1
3 THREADS DETAILS
A
A
95
163
ViewSonic
60
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
T=Telephone
Country/Region
Australia/New Zealand
Canada
Web Site
E-mail
F=Fax
AUS=1800 880 818
NZ=0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-1202
Europe/Middle East/Baltic
countries/North Africa
Contact your reseller
T= 852 3102 2900
T= 1800 11 9999
T= 080 265 9080
T= 0800 666 0194
T= 0800 891 6984
T= 800 440 303
Hong Kong
India
Korea
Latin America (Argentina)
Latin America (Brazil)
Latin America (Chile)
Latin America (Columbia)
Latin America (Mexico)
T= 01 800 915 6588
T= 001 800 514 6518
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
Latin America (Peru)
Macau
T= 0800 53458
T= 853 700 303
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-1202
Puerto Rico & Virgin Islands
Singapore/Malaysia/Thailand
South Africa
T= 65 6461 6044
United Kingdom
T (Toll-Free)= 1-800-688-6688
United States
T (Toll)= 1-424-233-2530
F= 1-909-468-1202
ViewSonic
6ꢁ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under
normal use, during the warranty period. If a product proves to be defective in material or
workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace
the product with a like product. Replacement product or parts may include remanufactured or
refurbished parts or components.
Limited Three (3) year General Warranty
Subject to the more limited one (1) year warranty set out below, North and South America: Three (3)
years warranty for all parts excluding the lamp, three (3) years for labor, and one (1) year for the
original lamp from the date of the first consumer purchase; Europe except Poland: Three (3) years
warranty for all parts excluding the lamp, three (3) years for labor, and ninety (90) days for the
original lamp from the date of the first consumer purchase; Poland: Two (2) years warranty for all
parts excluding the lamp, two (2) years for labor, and ninety (90) days for the original lamp from
the date of the first consumer purchase.
Limited One (1) year Heavy Usage Warranty:
Under heavy usage settings, where a projector’s use includes more than four (4) hours average
daily usage, North and South America: One (1) year warranty for all parts excluding the lamp,
one (1) year for labor, and ninety (90) days for the original lamp from the date of the first
consumer purchase; Europe: One (1) year warranty for all parts excluding the lamp, one (1) year
for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase.
Other regions or countries: Please check with your local dealer or local ViewSonic office for the
warranty information.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’
s installed lamp only. All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration, failure, or malfunction resulting from:
a. Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, improper
maintenance, unauthorized product modification, or failure to follow instructions
supplied with the product.
b. Operation outside of product specifications.
c. Operation of the product for other than the normal intended use or not under normal
conditions.
d. Repair or attempted repair by anyone not authorized by ViewSonic.
e. Any damage of the product due to shipment.
f. Removal or installation of the product.
g. Causes external to the product, such as electric power fluctuations or failure.
h. Use of supplies or parts not meeting ViewSonic’s specifications.
i. Normal wear and tear.
j. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
ViewSonic
6ꢂ
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer
Support (please refer to “Customer Support” page). You will need to provide your product’s
serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic
service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact
ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained
herein including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic
shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon
inconvenience, loss of use of the product, loss of time, loss of profits, loss of business
opportunity, loss of goodwill, interference with business relationships, or other commercial
loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. Some states do not allow limitations on implied warranties and/or do not allow the
exclusion of incidental or consequential damages, so the above limitations and exclusions may
not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and
Canada, contact ViewSonic or your local ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.
For users in Europe and Russia, full details of warranty provided can be found in www.
viewsoniceurope.com under Support/Warranty Information.
4.3: Projector Warranty
PRJ_LW01 Rev. 1h 06-25-07
ViewSonic
63
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Mexico Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
How long the warranty is effective:
3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer
purchase.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only.
All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, unauthorized attempted repair, or failure to follow instructions supplied with the product.
b. Any damage of the product due to shipment.
c. Causes external to the product, such as electrical power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static
image is displayed on the product for an extended period of time.
4. Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to
the attached Customer Support page). You will need to provide your product’s serial number, so please record
the product information in the space provided below on your purchase for your future use. Please retain your
receipt of proof of purchase to support your warranty claim.
For Your Records
Product Name: ________________________
Document Number: ____________________
Purchase Date: ________________________
Model Number: __________________________
Serial Number: ___________________________
Extended Warranty Purchase? _______________(Y/N)
If so, what date does warranty expire? _________
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including
the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility of
such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
ViewSonic
64
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
Tel: (55) 3605-1099
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV. Compumantenimietnos Garantizados, S.A. de C.V.
Calle Juarez 284 local 2
AV. GREGORIO MENDEZ #1504
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
E-Mail: [email protected]
COL, FLORIDA C.P. 86040
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: [email protected]
Puebla, Pue. (Matriz):
Veracruz, Ver.:
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
CONEXION Y DESARROLLO, S.A DE C.V. Av.
Americas # 419
72160 PUEBLA, PUE.
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: [email protected]
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01-22-91-00-31-67
E-Mail: [email protected]
Chihuahua
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: [email protected]
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: [email protected]
Distrito Federal:
Guadalajara, Jal.:
QPLUS, S.A. de C.V.
Av. Coyoacán 931
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail : [email protected]
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: [email protected]
Guerrero Acapulco
Monterrey:
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
Tel: 8129-5103
E-Mail: [email protected]
MERIDA:
Oaxaca, Oax.:
ELECTROSER
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: [email protected]
Fax: 01(52)95-15-13-67-00
E-Mail. [email protected]
Tijuana:
FOR USA SUPPORT:
STD
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
4.3: ViewSonic Mexico Limited Warranty
PRJ_LW03 Rev. 1A 06-25-07
ViewSonic
65
PJL7211
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|