N2750w LCDTV Display
User’s Guide
Guide de I’utilisateur
Guía de usuario
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © ViewSonic Corporation, 2004. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material,
or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you
may mail or fax to ViewSonic.
E
N
G
L
I
For Your Records
Product Name:
Model Number:
ViewSonic N2750w
VS10576-1M
S
H
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product
properly at the end of its useful life. Your local waste disposal company may provide information
about proper disposal.
ViewSonic N2750w 2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
ATTENTION:
Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety,
please read all the safety and operating instructions before you operate this product follow its operating and keep this
user guide for future reference.
INSTALLATION
1. Grounding or Polarization
Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature.If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
2. Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire
or electric shock.
3. Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit
from the product.
4. Ventilation
Slots and openings around the cabinet are provided for ventilation.
To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or
covered.
Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
E
N
G
L
I
5. Other Notices
Avoid exposure the N2750w to direct sunlight or high temperature.
Avoid exposure the N2750w to moisture or high humidity.
Do not attempt repair yourself. Your warranty does not cover repair or attempted repair by anyone not authorized
by ViewSonic.
S
H
If your N2750w will not be used for a long period of time, unplug the power cord and remove the batteries from
the remote control.
6. Precautions
Sit at least 27" from your LCD display.
Avoid touching the screen. Skin oils are difficult to remove.
Never remove the rear cover. Your LCD display contains high-voltage parts. You may be seriously injured if you
touch them.
Avoid exposing your LCD display to direct sunlight or another heat source. Orient your LCD display away from direct
sunlight to reduce glare.
Always handle your LCD display with care when moving it.
Place your LCD display in a well-ventilated area. Do not place anything on your LCD display that prevents heat
dissipation.
Ensure the area around the LCD display is clean and free of moisture.
Do not place heavy objects on the LCD display, video cable, or power cord.
If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off and call your dealer or
ViewSonic. It is dangerous to continue using the LCD display.
ViewSonic N2750w 3
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA INSTALLATION INSTRUCTIONS
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National
Electrical Code, ANSI/NFPA70, provides information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a
heavy storm lighting may strike while you are holding the cable cord, causing serious injury; turn off you LCD and
wait for the wether to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be
fatal.
Cleaning the LCD Display
Make sure the LCDDisplay is turned off.
Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft,
lint-free cloth, and wipe the screen.
E
N
G
L
I
To clean the case:
1 Use a soft, dry cloth.
2 If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
S
H
Disclaimer
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD display screen or
case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display. ViewSonic
will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
ViewSonic N2750w 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
®
Congratulations on your purchase of a ViewSonic LCD TV display. Important!
Save the original box and all packing material for future shipping needs.
Package Contents
Your LCD TV display package includes:
LCDTV Display
RCAA/V Cable
Audio Cable
L-Shape Power Cable
39-Key Remote Control with batteries
ViewSonic User Guide
Quick Start Guide
E
N
G
L
I
S
H
ViewSonic N2750w 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front View of the Product
1
2
3
4
5
6
E
N
G
L
I
7
8
S
H
Volume Down
1
2
3
4
5
6
Decrease sound volume or adjust a highlighted control while in OSD menu.
Volume Up
Increase sound volume or adjust a highlighted control while in OSD menu.
MENU
Turn OSD menu ON/OFF.
CH Down
Channel down when source is at TV or select a control while in OSD menu.
CH Up
Channel up when source is at TV or select a control while in OSD menu.
ENTER
To highlight a control in OSD menu.
Power button
7
8
Remote control receiver
ViewSonic N2750w 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View of the Product
A
B
C
D
E
F
G
J
K L
M
N
H I
O
TV signal input
A
B
C
D
E
F
E
N
G
L
I
Connect to the antenna or cable service.
YCbCr signal input
Connect the external video devices with component output to these jacks.
S-Video input
Connect the external video device such as VCR, DVD and video game into this jack.
S
H
AV Video input
Connect the external video device such as VCR, DVD and video game into this jack.
Audio output
Connect this port to your external speaker.
AV/ S-Video signal Audio input (left/right)
Connect the external audio into this jack.
YCbCr signal Audio input (left/right)
Connect the external audio into this jack.
G
Earphone output (light blue)
H
I
PC Audio input (light green)
YPbPr signal Audio input (left/right)
Connect the external audio into this jack.
J
YPbPr signal input
K
Connect the external video devices with progressive component output to these jacks.
L VGA signal input
M
DVI-D signal input
Power (AC input)
Using cable provided, connect to a power source.
N
O
AC power switch
ViewSonic N2750w 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
E
N
G
L
I
S
H
ViewSonic N2750w 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control button function as follow
A
B
C
D
POWER button
INFO button
SLEEP button
MTS button
Power ON/OFF
Source and channel display
TV Sleep time setup
Select MONO, SAP, Stereo and DUAL when it is
available
E
F
MUTE button
C.C button
Mute ON/OFF
Select Close Caption
G
H
I
Menu button
POP button
PIP button
Select OSD menu
Turn picture on picture ON/OFF
Turn picture in picture ON/OFF
Display Picture OSD menu on video input mode
Favorite channel up
J
Picture button
CH Up button
SOUND button
TV button
K
L
Display Sound OSD menu on video input mode
Switch to TV input mode
M
N
O
P
Q
R
E
N
G
L
I
Source button
Select Input Source
0~100+ number button Input channel number
LAST button
Return to previous channel
Setup V-Chip
S
H
V-CHIP button
UP/ DOWN/ Left/
UP/DOWN for OSD function Select and Left/Right for
function adjust
Right/ ENTER button
VOL- and VOL+ button
Adjust the Volume when
there is no OSD menu display
CH- and CH+ button
Change the channel on
TV mode when there is no OSD menu display
S
T
U
V
EXIT button
OSD exit
PC AUTO button
PIP SWAP button
PIP SOUND button
Auto-adjust screen size/position when in PC mode
Swap main and sub picture of PIP or POP
Select the sound from main or sub picture of PIPor POP
Display OSD TV menu
W TV MENU button
X
Y
CH Down button
SET UP button
Favorite Channel Down
Display Setup OSD menu on video input mode
ViewSonic N2750w 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1. Insert Remote Control Batteries
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
CAUTION
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries incor-
rectly may result in cracking or leakage, which may pose a risk of fire or lead to
personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
When the remote control will not to be used for an extended period, remove
the batteries.
E
N
G
L
I
S
H
2. Connecting with the antenna
Make sure the power is off before installing N2750w.
Connect the LCD TV to TV antenna terminal or CATV box by 75-ohm coaxial cable.
RF Cable or Adapter
ViewSonic N2750W 10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect Audio Cable
Connect Video/Audio cables from compatible devices into the back panel of N2750w.
OPTIONAL:
To connect an external amplifier, con-
nect the L/R RCA cable from the TV
AUDIO OUT port to the appropriate
AUDIO IN port on a compatible ampli-
fier as shown on the right.
Stereo system
Audio in Cable
(Cable not supplied)
E
N
G
L
I
4. Connect AV, S-Video, YCbCr, YPbPr, DVI to Video Devices
Connect Video/Audio cables from compatible devices into the back panel of N2750w.
AV model:
S
H
RCA A/V Cable
VCR
ViewSonic N2750w 11
Download from Www.Somanuals.com. All Manuals Search And Download.
S-Video model:
S-Video Cable
(Cable not supplied)
VCR
Audio in Cable
(Cable not supplied)
YCbCr model:
E
N
G
L
I
YCbCr Cable
(Cable not supplied)
S
H
DVD Palyer
or VCR
Audio in Cable
(Cable not supplied)
ViewSonic N2750w 12
Download from Www.Somanuals.com. All Manuals Search And Download.
YPbPr model:
YPbPr Cable
(Cable not supplied)
DVD Palyer
or VCR
Audio in Cable
(Cable not supplied)
DVI model:
E
N
G
L
I
DVD Palyer
(DVD Palyer should have
the DVI output terminal)
S
H
Audio Cable
DVI Cable
(Cable not supplied)
ViewSonic N2750w 13
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connect to the PC
VGA (15pin D-Sub):
Connect the VGA cable from VGA output of PC to the VGA terminal input of N2750w.
PC up to 1280 x 1024, 1024 x 768 is the preferred resolution.
PC
VGA 15 Pin Cable
(Cable not supplied)
E
N
G
L
I
PC Audio in:
Connect the Audio In cable (green) from audio output of your PC to the audio input
terminal (green) of N2750w.
S
H
PC
PC Audio in Cable
(Cable not supplied)
ViewSonic N2750w 14
Download from Www.Somanuals.com. All Manuals Search And Download.
DVI-D:
Connect the DVI cable from DVI output of PC to the DVI terminal input of N2750w.
PC
DVI Cable
(Cable not supplied)
E
N
G
L
I
Earphone:
Connect Earphone from compatible devices into the back panel of N2750w.
S
H
Earphone
(Earphone not supplied)
ViewSonic N2750w 15
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Connect power cable
Connect the power cord to the N2750w then to a properly grounded AC outlet. Turn on
the AC Switch on the back of N2750w
AC Switch
Switch to ON
AC wall socket
E
N
G
L
I
7. Turn Power ON
Press the Power
button on top of the
LCD display. Or press
the Power On (red)
button on the Remote
Control. Turn Video
source power ON.
S
H
8. Select input source for your LCDTV display, via either OSD menu or
Remote control
The Source key of N2750w is the shortcut key for selection of input to display.
TV key of remote control is shortcut for TV selection.
ViewSonic N2750w 16
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
To operate the function of your LCD TV, you can use your remote control or
those buttons above your LCD TV to set input sources, such as OSD sources,
volume adjusting, and ect.
Powering the LCD TV
Before using the LCD TV:
1. Insert the power plug.
2. Connect external equipment properly.
3. Turn on the Main AC Power Switch. (If the LCD TV will not be used for a long
period of time, please turn it off)
Power On/Off
To turn the LCD TV on/off :
Press the POWER button under the LCD TV or press the Power button on your
remote control to turn on/off the TV. The power LED indicator lights up when the
LCD TV is working.
Select input source
To select the required input sources. Use
to move your cursor bar, and input
with Enter.(please refer to page 15 )
E
N
G
L
I
VOLUME Adjusting
Press
or VOL-/+ to adjust the volume.
If you prefer to deaden the volume, press MUTE.
If you want to open the volume, press MUTE again, or press
adjust the sound.
directly to
S
H
INFO –
To display the information of current source and TV channel.
Press INFO, and the current state will be displayed on the screen.
Channel Select
Press number key, CH-/+ key or
button to select your desired channel.
If your desired channel is below 100, directly press number key. If your desired
channel is over 100, press 100+ key first, and then press the other two number
keys.
Ex: Your desired number is 8.
Press 0
press 8 or press 8 only.
Ex: Your desired number is 110.
Press 100
press 1
press 0.
ViewSonic N2750w 17
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Functions
User controls and indicators
Power on /off switch
To switch on the unit when first pressed, and switch off when pressing again.
The monitor is used in a normal operation state. For this, there is no OSD
windows displayed on the screen unless it is turned on by pressing MENU.
To move the cursor bar, please use CH
to select your desired item, and
then press ENTER. In addittion, you can adjust the volume by using VOL”+”
or “-”.
Press
to adjust the condition.
Use EXIT to leave OSD Menu.
Press MENU again to get into next page of OSD menu.
Ex: When in page 1, press MENU for one time to get into page 2; two times to
get into page 3.
Source Input: TV
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 TV MENU
Source Input: AV, S-Video, YCbCr
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
E
N
G
L
I
Page 4 SETUP MENU
Page 5 SOUND MENU
Page 6 SOUND MENU
Page 7 PARENTAL CONTRAL
Page 6 PARENTAL CONTRAL
S
H
ViewSonic N2750w 18
Download from Www.Somanuals.com. All Manuals Search And Download.
How to adjust the desired items:
Use
to move cursor bar up and down
ENTER to input the desired item
Use
to adjust the item.
BRIGHTNESS: To adjust the luminance of the image. (right: Max, left: low)
CONTRAST: To adjust the contrast ratio of the image. (right: high contrast, left:
low contrast)
SHARPNESS: To adjust the sharpness of image. (right: sharpen, left: soften)
COLOR: To adjust color saturation. (right: brilliant color, left: pale color)
TINT: To adjust the video hue level. (right: more greenish tone, left: more reddish
tone)
FINE TUNE: To adjust the delay time of data and clock with
ASPECT RATIO: To select the image size for 16:9 or 4:3 with
.
.
3D COMB: To provide high quality images with minimal dot crawl and cross color
noise. (Except in S-Video, YCbCr mode)
NR FUNCTION: To reduce the noise of picture.
COLOR TEMP ERATURE: To select the color temperature, either warm, medium
or cool.
Press MENU again of the next Menu (INPUT SELECT).
Source Input: TV
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 TV MENU
Source Input: AV, S-Video, YCbCr
Page 1 PICTURE MENU
Page 2 INPUT SELECT
E
N
G
L
I
Page 3 PIP/POP MENU
Page 4 SETUP MENU
S
H
Page 5 SOUND MENU
Page 6 SOUND MENU
Page 7 PARENTAL CONTRAL
Page 6 PARENTAL CONTRAL
ViewSonic N2750w 19
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is to select your input sources, such as VGA, YPbPr, AV, S-VIDEO, TV,
DVI, and YCbCr.
How to select the input sources:
Use
to move cursor bar up and down
ENTER to input the desired item.
Press MENU again of the next Menu (PIP/POP MENU).
Source Input: TV
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 TV MENU
Source Input: AV, S-Video, YCbCr
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 SOUND MENU
Page 6 SOUND MENU
Page 7 PARENTAL CONTRAL
Page 6 PARENTAL CONTRAL
E
N
G
L
I
S
H
PIP/POP Menu allows you watch two screens from different sources at the same
time. According to your preference, there are two kinds of screen for selection
PIP or POP screen.
How to select the desired items:
Use
to move cursor bar up and down
Use
to select your desired item
Press ENTER to input the instruction
EXIT to close the OSD menu.
INPUT: To select sub-screen input sources of PIP/POP. In PIP Menu, the input
sources of sub-screen are specially designated as following,
The input sources in TV/ AV/ S-Video/ YCbCr mode are VGA or YPbPr.
MODE: To select PIP or POP screen. If you want to return to the full main
screen, select “Disable.”
ViewSonic N2750w 20
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP Screen
POP Screen
When selecting PIP , it will show the other items to offer the adjusting function--
INPUT, MODE, AUDIO, SWAP, PIP SIZE, and PIP POSITION as following:
E
N
G
L
I
S
H
AUDIO: To select the source of the sound from main screen or sub-screen.
SWAP: To exchange the main screen to sub-screen, including video and sound.
PIP SIZE: To adjust the size of sub-screen. The function only acts on PIP.
PIP POSITION: To set the position of sub-screen. This function only acts on PIP.
ViewSonic N2750w 21
Download from Www.Somanuals.com. All Manuals Search And Download.
E
N
G
L
I
S
H
When selecting POP, it will show the other items to offer the adjusting function—
INPUT, MODE, AUDIO, and SWAP.
Press MENU again of the next Menu (SETUP MENU).
ViewSonic N2750w 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Input: TV
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 TV MENU
Source Input: AV, S-Video, YCbCr
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 SOUND MENU
Page 6 SOUND MENU
Page 7 PARENTAL CONTRAL
Page 6 PARENTAL CONTRAL
E
N
G
L
I
S
H
OSD POSITION-H: To adjust the horizontal position of OSD.
OSD POSITION-V: To adjust the vertical position of OSD.
OSD TIME OUT: To setup the displaying time of OSD.
TRANSPARENCY: To adjust the transparency of OSD.
OSD COLOR: To select your favorite OSD color.
LANGUAGE: To select OSD Language.
MEMORY RECALL: Recall factory pre-sets.
Press MENU again of the next Menu (TV MENU in TV Mode, SOUND MENU in
AV, S-Video, YCbCr Mode).
ViewSonic N2750w 23
Download from Www.Somanuals.com. All Manuals Search And Download.
(It does not function in any other mode except in TV mode)
Source Input: TV
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 TV MENU
Page 6 SOUND MENU
Page 7 PARENTAL CONTRAL
MTS: The function is to provide the multi-channel TV sound. The system with
MTS can receive Dual, Stereo, SAP(Secondary Audio Program), or Mono sound.
Both Stereo and Mono sound receive from TV broadcasts in main sound.
However, the SAP feature permits the TV station to broadcast other information,
so that it can be audio in another language. With Dual sound, you can enjoy the
main sound (normal program soundtrack) and the second language at the same
time.
TV/CATV SELECT: To select TV signal input from TV or CATV.
AUTO SCAN: To auto scan the TV channels (TV or CATV).
1. Function: To look for all the channels viewable in the set area. Kindly suggest
you auto scan all the channels before watching your TV for the first time.
2. After auto scan all the channels, you need not to do it again when turning on
your TV next time.
E
N
G
L
I
S
H
SET CHANNEL: To select your desired channels by
CHANNEL: To add or delete the appointed TV channel.
How to do?
.
1. Use the function “SET CHANNEL” to select the desired channel.
2. Move your cursor bar to CHENNEL by using
.
3. Press or one time to add or delete the appointed channel.
4. Press EXIT to exit the menu.
Ps. After input the instruction of Add/Del Channel, as running the channels by using
with
your remote control, the channel you deleted will be passed over, and the channel you added
will be shown up.
LABEL: To set a name for the channel with 0~9 and A~Z.
ViewSonic N2750w 24
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set a name for the channel?
1. Move your cursor bar to LABEL by using
.
2. Press to get into the CHANNEL LABEL page.
3. Use to pick up the numbers or letters, and then press ENTER to input
the words.
4. After setting a name, move your cursor to SAVE for saving the input.
How do I cancel the name?
1. Get into the CHANNEL LABEL page (see above instruction).
2. Move your cursor by using
to select the “blank,” which is the last in the
line of numbers, exactly beside “ --.“
3. Press ENTER several times to delete the name.
E
N
G
L
I
S
H
FAVORITE: To set the favorite 10 channels.
How to do?
1. Move your cursor bar to FAVORITE by using
.
2. Press to get into the FAVORITE CHANNEL page.
3. Input the channel number.
4. Press ENTER to input the favorite channel.
5. Use
to move the cursor to setup the next favorite channel in proper order.
6. Press EXIT to exit the FAVORITE CHANNEL page.
7. After setting the favorite channels, you can use your remote control to select
those setting channels by pressing Favorite CH+ / CH- buttons.
ViewSonic N2750w 25
Download from Www.Somanuals.com. All Manuals Search And Download.
FINE TUNE: To improve TV channel reception when needed. Use
your cursor to Fine Tune, then press to adjust it.
to move
SLEEP TIME: To set up the off timer. There are several kinds of timing to
choose: 10 min, 20 min, 30min, 40 min, 50 min, and 60min.
E
N
G
L
I
Press MENU again of the next Menu (SOUND MENU).
S
H
ViewSonic N2750w 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Input: TV
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 TV MENU
Source Input: AV, S-Video, YCbCr
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 SOUND MENU
Page 6 SOUND MENU
Page 7 PARENTAL CONTRAL
Page 6 PARENTAL CONTRAL
E
N
G
L
I
S
H
VOLUME: To adjust the volume.
BASS: To adjust the bass.
TREBLE: To adjust the treble.
BALANCE: To adjust the left and right audio balance.
SRS WOW: To turn SRS(WOW) on/off.
TRU BASS: To adjust the tru bass.
Press MENU again of the next Menu (PARENTAL CONTRAL).
ViewSonic N2750w 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Input: TV
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 TV MENU
Source Input: AV, S-Video, YCbCr
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 SOUND MENU
Page 6 SOUND MENU
Page 7 PARENTAL CONTRAL
Page 6 PARENTAL CONTRAL
E
N
G
L
I
S
H
Parental control is to set up V-Chip condition and password.
V-Chip is transmitted from TV station to help parents monitor what their children
watch. According to the pre-set of factory, viewers can see all of the channels.
However, setting V-Chip can block the appointed channels.
The parental control lists settings for two types of guidelines—Television Rating
Guide and Movie Rating Guide.
CAPTION: To set up close caption mode. (CC1~CC4,TX1~TX4)
CHANGE PASSWORD:To re-set your password.
How to do?
1. Move the cursor to the item of CHANGE PASSWORD.
2. Press .
3. There will appear captions “ENTER PASSWORD.”
ViewSonic N2750w 28
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Enter 0000 if you have not assigned the special password.
E
N
G
L
I
S
H
5. Use remote control to enter four digit numbers to set the new password.
ViewSonic N2750w 29
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Enter the 4 digit numbers again to verify your new password, and then it will
show OK on the screen, and then turn back to the Parental Control page.
TV RATING GUIDE: To setup TV Rating.
How to set up TV Rating?
1. Move the cursor to the item of TV RATING GUIDE.
2. Press .
3. There will appear captions “ENTER PASSWORD.” Input your password with
your remote control.
E
N
G
L
I
S
H
4. Select your TV Rating.
ViewSonic N2750w 30
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Move the cursor by using
to select the rating grade you expect to block.
6. Press ENTER to set block or unblock condition. ("B" means block; "U" means
unblock.)
7. Press EXIT to leave the page.
8. The above steps are only set up the instruction of V-Chip condition, you should
get to VCHIP TEMP DISABLE to open the function of blocking.
E
N
G
L
I
The TV Ratings are defined as following
TV-Y All children
TV-PG Parental guidance suggested
S
H
TV-Y7 Directed to older children:
this program is designed for
children age 7 and above
TV-14 Parents strongly cautioned:
thisprogram contains some
material that is unsuitable for
children under 14 years of age
TV-G General audience
TV-MA Mature audience only
As usual, TV Rating Guide will show one or more letters added to advice parents
that a show contains high levels of violence, sex, adult language, or suggestive
dialogue.
V
S
Violence
Sexual situations
L
Coarse or crude indecent language
Suggestive dialogue (usually means talk about sex)
Fantasy violence
D
FV
ViewSonic N2750w 31
Download from Www.Somanuals.com. All Manuals Search And Download.
MPAA RATING GUIDE: To setup the movie ratings.
Enter your password with your remote control.
You can reference the operating steps of TV RATINGGUIDE, for they are the same
way as MPAA RATING GUIDE.
E
N
G
L
I
S
H
ViewSonic N2750w 32
Download from Www.Somanuals.com. All Manuals Search And Download.
The Movie Ratings are defined as following
G
General audience
R
Restricted
NC-17 No one 17 and under limited
X Adult audience only
PG
Parental guidance suggested
PG-13 Parents strongly cautioned.
VCHIP TEMP DISABLE: To temporarily disable V-chip setting in TV mode once
correct password is entered.
E
N
G
L
I
S
H
ViewSonic N2750w 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Input: VGA, DVI, YPbPr
The menus in VGA, DVI, and YPbPr mode are as following:
In VGA Mode:
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 SOUND MENU
E
N
G
L
I
How to adjust the desired items:
Use
to move cursor bar up and down
ENTER to input the desired item
Use
to adjust the item.
AUTO ADJUST: Auto adjust picture's Horizontal position, Vertical position, Fine
Tune and H.Size. Press to start the function.
BRIGHTNESS: To adjust the luminance of the image. (right: Max, left: low)
CONTRAST: To adjust the contrast ratio of the image. (right: high contrast, left:
low contrast)
S
H
IMAGE H.POSITION: To adjust the horizontal position of the video with
.
IMAGE V.POSITION: To adjust the vertical position of the video with
.
FINE TUNE: To adjust the delay time of data and clock with
H.SIZE: To adjust the horizontal pixel clock of the video (VGA mode only).
ASPECT RATIO: To select the image size for 16:9 or 4:3 with
.
.
INFORMATION: To show displaying mode condition (VGA mode only). Press to
show the current resolution.
TEXT/GRAPHIC MODE: To select text mode or graphic mode (VGA mode only).
COLOR TEMP ERATURE: To select the color temperature, either warm, medium
or cool.
Press MENU again of the next Menu (INPUT SELECT).
ViewSonic N2750w 34
Download from Www.Somanuals.com. All Manuals Search And Download.
In DVI, YPbPr Mode:
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 SOUND MENU
How to adjust the desired items:
Use
to move cursor bar up and down
ENTER to input the desired item
Use
to adjust the item.
E
N
G
L
I
AUTO ADJUST: Auto adjust picture's Horizontal position, Vertical position, Fine
Tune and H.Size. Press to start the function.
BRIGHTNESS: To adjust the luminance of the image. (right: Max, left: low)
CONTRAST: To adjust the contrast ratio of the image. (right: high contrast, left:
low contrast)
S
H
IMAGE H.POSITION: To adjust the horizontal position of the video with
.
IMAGE V.POSITION: To adjust the vertical position of the video with
.
SHARPNESS: To adjust the sharpness of image. (right: sharpen, left: soften)
COLOR: To adjust color saturation. (right: brilliant color, left: pale color)
TINT: To adjust the video hue level. (right: more greenish tone, left: more reddish
tone)
FINE TUNE: To adjust the delay time of data and clock with
.
ASPECT RATIO:To select the image size for 16:9, 4:3 or 1:1 with
.
COLOR TEMP ERATURE: To select the color temperature either warm, medium
or cool.
Press MENU again of the next Menu (INPUT SELECT).
ViewSonic N2750w 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Input: VGA, DVI, YPbPr
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 SOUND MENU
This page is to select your input sources, such as VGA, YPbPr, AV, S-VIDEO, TV,
DVI, and YCbCr.
How to select the input sources:
E
N
G
L
I
Use
to move cursor bar up and down
ENTER to input the desired item.
Press MENU again of the next Menu (PIP/POP MENU).
Source Input: VGA, DVI, YPbPr
S
H
Page 1 PICTURE MENU
Page 2 INPUT SELECT
Page 3 PIP/POP MENU
Page 4 SETUP MENU
Page 5 SOUND MENU
PIP/POP Menu allows you watch two screens from different sources at the same
time. According to your preference, there are two kinds of screen for selection
PIP or POP screen.
ViewSonic N2750w 36
Download from Www.Somanuals.com. All Manuals Search And Download.
How to select the desired items:
Use to move cursor bar up and down
Press ENTER to input the instruction
Use
to select your desired item
EXIT to close the OSD menu.
INPUT: To select sub-screen input sources of PIP/POP. In PIP Menu, the input
sources of sub-screen are specially designated as following,
The input sources in VGA/ YPbPr mode are TV/ AV/ S-Video/ DVI/ or YCbCr.
MODE: To select PIP or POP screen. If you want to return to the full main
screen, select “Disable.”
PIP Screen
POP Screen
When selecting PIP , it will show the other items to offer the adjusting function--
INPUT, MODE, AUDIO, SWAP, PIP SIZE, and PIP POSITION as following:
E
N
G
L
I
S
H
AUDIO: To select the source of the sound from main screen or sub-screen.
SWAP: To exchange the main screen to sub-screen, including video and sound.
ViewSonic N2750w 37
Download from Www.Somanuals.com. All Manuals Search And Download.
|