Venturer Portable DVD Player PVS1262 User Manual

B. Using Headphones / Earphones  
POWER SUPPLY  
REMOTE CONTROL  
Turn down the volume before connection, and  
then adjust the level.  
IMPORTANT SAFETY  
INSTRUCTIONS  
When headphones / earphones are connected,  
no sound will be output from the unit's speaker.  
Using the Remote Control  
A. Using the AC adapter  
This AC adapter operates on AC 100V -120V.  
TO CHANGE REMOTE BATTERY  
1. Open the  
battery door.  
Point the remote control at the REMOTE  
SENSOR located on the unit.  
Headphones /  
Earphones  
(3.5mm diameter plug)  
When there is a strong ambient light  
source, the performance of the infrared  
REMOTE SENSOR may be degraded,  
causing unreliable operation.  
Caution: Avoid listening to sound at levels  
which may be harmful to your ears.  
Cautions:  
1. Read Instructions - All the safety and operating instructions should be read before the  
appliance is operated.  
The included AC adapter is for use  
with this unit only. Do not use them  
with other equipment.  
When the unit is not going to be used  
for long time, disconnect the AC  
adapter from the AC outlet.  
When the AC adapter is plugged in,  
the apparatus is not completely  
disconnected from the main, even  
when the power is turned off.  
2. Retain Instructions - The safety and operating instructions should be retained for future  
reference.  
3. Heed Warnings - All warnings on the appliance and in the operating instructions should  
be adhered to.  
4. Follow Instructions - All operating and use instructions should be followed.  
5. Water and Moisture - The appliance should not be used near water - for example, near  
a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming  
pool, and the like.  
6. Carts and Stands - The appliance should be used only with a cart or stand that is  
recommended by the manufacturer.  
6A. An appliance and cart combination should be moved with care. Quick  
stops, excessive force, and uneven surfaces may cause the  
appliance and cart combination to overturn.  
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall  
or ceiling only as recommended by the manufacturer.  
8. Ventilation - The appliance should be situated so that its location or  
position does not interfere with its proper ventilation. For example,  
the appliance should not be situated on a bed, sofa, rug, or similar  
surface that may block the ventilation openings; or, placed in a built-in installation, such  
as a book case or cabinet, that may impede the flow of air through the ventilation openings.  
9. Heat - The appliance should be situated away from heat sources such as radiators, heat  
registers, stoves, or other appliances (including amplifiers) that produce heat.  
10. Power Sources - The appliance should be connected to a power supply only of the type  
described in the operating instructions or as marked on the appliance.  
11. Grounding or Polarization - Precautions should be taken so that the grounding or  
polarization means of an appliance are not defeated.  
12. Power-Cord Protection - Power-supply cords should be routed so that they are not likely  
to be walked on or pinched by items placed upon or against them, paying particular  
attention to cords at plugs, convenience receptacles, and the point where they exit from  
the appliance.  
13. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.  
14. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet  
when left unused for a long period of time.  
15. Object and Liquid Entry - Care should be taken so that objects do not fall, and liquids  
are not spilled, into the enclosure through openings.  
16. Damage Requiring Service - The appliance should be serviced by qualified service  
personnel when:  
2. Insert one  
CR2025 (3V)  
size battery.  
The recommended effective distance for  
remote operation is about 16 feet (5  
meters).  
To AC  
outlet  
1
2
To "DC IN  
9V" jack  
SOUND SYSTEM  
Remove the PVC sheet before operating  
the Remote Control.  
BATTERY REPLACEMENT  
Dolby Digital  
When the battery becomes weak, the  
operating distance of the remote control  
will be greatly reduced and you will need to  
replace the battery.  
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital  
can reproduce from one to 5.1 discrete channels of excellent quality audio.  
The unit automatically recognizes the Dolby Digital bitstream and provides  
a downmix suitable for two-channel listening. An additional Dolby Digital  
decoder is required for reproduction of the discrete multi-channel soundtracks  
available on many DVDs.  
AC Adapter  
B. Using a car plug adapter  
A 12V car plug adapter allows the unit to be used with vehicles that have a 12V, negative  
ground electrical system.  
Note:  
If the remote control is not to be used for a long time, remove the battery to avoid damage  
caused by the corrosive effects of battery leakage.  
Manufactured under license from Dolby Laboratories.  
'Dolby' and  
the double-D symbol are trademarks of Dolby Laboratories.  
WARNING: Do not dispose of battery in fire, battery may explode or leak.  
WARNING:  
To Car plug  
12V jack  
To the cigarette  
lighter socket  
1
Disconnect the car plug  
adapter when not in use.  
Not for use in 24V  
vehicles.  
2
Basic playback  
DVD  
CD  
PLAYING A DISC  
CONTROL REFERENCE GUIDE  
Car plug adapter  
Remote Control  
This owner’s manual explains the basic instructions for operating this unit. Some  
DVDs are produced in a manner that allows specific or limited operation during  
playback. Therefore, this unit may not respond to all operating commands. THIS IS  
NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in  
question for more information about the options available on that DVD.  
” may appear on the screen during operation. A “  
operation is not permitted by the unit or disc.  
Cautions:  
selected chapter or track.  
6) Cursor ( ) buttons  
• When purchasing a car plug adapter, seek expert advice to ensure that it is fully compatible  
with the unit.  
TV MODE  
MENU  
GOTO  
,
,
,
15  
14  
1
Use to highlight selections on a menu  
screen and adjust certain settings.  
ENTERbutton  
STOP  
PLAY  
PAUSE  
• In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.  
• Make sure the unit is fastened securely to prevent it from falling or flying through the air in  
the event of an accident.  
2
” means that the desired  
PREV  
SEARCH  
NEXT  
3
13  
12  
11  
10  
Confirm selections on a menu screen.  
7) Number (0 - 9) buttons  
Use when creating programmes, and  
entering a parental level password. Also  
use to select a CD track directly.  
8) SETUP button  
4
MEMORY  
ANGLE  
DISPLAY  
AUDIO  
• When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may  
become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.  
• After use, disconnect the 12V car plug adapter from both the unit and cigarette lighter socket.  
M
5
Playing a Disc  
ENTER  
1. Slide the POWER ON/OFF switch on the front of the unit to the ON position.  
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.  
2. Open the disc door.  
6
2
6
3
SUBTITLE/  
RETURN  
C.Using the rechargeable battery  
4
5
8
3. Hold the disc by its sides and carefully place it onto the spindle with  
the label side facing up, pushing gently until you hear a “click”.  
4. Close the disc door.  
7
9
• Charge the rechargeable battery before using them for the first time. The normal charging  
time should be completed at least 4-5 hours. The green charging light will go out when the  
battery becomes fully charged.  
In stop mode, open and close the  
SETUP menu.  
7
9
0
SETUP  
REPEAT A-B button  
It takes a short while for your unit to load the disc. After loading, the  
unit will automatically either bring you to the main menu of the DVD, or  
start playing the DVD.  
A. The power-supply cord or the plug has been damaged; or  
B. Objects have fallen, or liquid has been spilled, into the appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or exhibits a marked change in  
performance; or  
8
• The rechargeable battery is suitable when adapting the unit for portable use and when it  
is convenient for you to enjoy the unique functions of the unit out of doors.  
A-B  
DISC  
Perform point-to-point repeat playback  
on a DVD or CD.  
REPEAT  
REPEAT DISC button  
To recharge the battery  
5. If the unit does not automatically start playing the DVD, press the  
PLAY button.  
Repeat chapter or title of a DVD.  
Repeat single track or whole CD.  
9) SUBTITLE button  
Place battery on  
the bottom of the  
DVD player  
1
E. The appliance has been dropped, or the enclosure damaged.  
17. Servicing - The user should not attempt to service the appliance beyond that described  
in the operating instructions. All other servicing should be referred to qualified service  
personnel.  
Pausing playback (still mode)  
Press the II PAUSE button. To resume normal playback, press the  
Each time you press the II PAUSE button, the picture advances one frame.  
1) TV MODE button  
Select one of the subtitle languages  
programmed on a DVD.  
RETURNbutton  
PLAY button.  
In stop mode, select whether to output  
the video signal in PAL or NTSC. When  
the TV shows “AUTO” this means the  
output signal depends on the DVD If the  
TV shows “PAL” or “NTSC” it means the  
output signal is fixed to either “PAL” or  
“NTSC”. For best results, keep this set  
on “AUTO” or “NTSC”.  
Return to the normal operation after  
using the SETUP menu of a DVD.  
10) AUDIO button  
Select one of the audio sound tracks  
programmed on a DVD or select the  
audio output mode on an AUDIO CD.  
11) ANGLEbutton  
Switches between multiple camera  
angles when the DVD you are playing  
has multiple camera angles recorded.  
12) DISPLAY button  
Stopping playback  
Press the  
playback at the position where the disc was stopped, press the  
If you press the STOP button twice, the unit’s memory will be cleared and pressing the  
STOP button at the location where you want to interrupt playback. To resume  
PLAY button.  
To BATTERY  
IN jack  
To the  
slots  
DISC FORMATS  
2
3
PLAY button will reset the disc to the beginning.  
The unit can playback.  
2)  
STOP button  
Skipping to a different track  
Stop playing a disc.  
Audio CDs  
DVDs  
Press the  
Press the  
PREV button repeatedly to skip to the start of the current or previous track.  
NEXT button to skip to the next track.  
PLAY button  
[8cm/12cm disc]  
Compatible  
[8cm/12cm disc]  
Press to start or resume playback a disc.  
PAUSE button  
For audio CDs, use the number buttons on the remote control to jump immediately to the  
desired track number.  
Charging  
7light ON  
Region Management Information  
Pause playback, frame advance.  
PREV button  
Change disc status information displayed  
on the screen.  
Region Management Information: This unit is designed and manufactured to respond to the  
Region Management Information that is encoded on DVDs. If the Region number printed on  
the DVD does not correspond to the Region number of this unit,it cannot play that disc.  
3)  
4)  
Move back through titles, chapters or  
tracks on a disc.  
Fast Forward/Fast Reverse  
1. Press the SEARCH or  
13)  
NEXT button  
5To AC  
outlet  
To DC IN  
4 9V jack  
6Turn power to OFF  
position this will  
start recharging  
the battery  
Move forward through titles, chapters or  
tracks on a disc.  
SEARCH button when a disc is playing.  
/
SEARCH buttons  
1
The region number of this unit is 1.  
• The disc begins a fast scan at two times normal (x2) speed.  
• Four speeds are available. Each time the SEARCH button is pressed, the speed of the  
fast scan changes in the following sequence:  
Recharging is  
8completed when  
SEARCH: Fast reverse playback.  
14) GOTO button  
SEARCH: Fast forward playback.  
charging light  
goes out  
Disc Function or Operation that is Not Available  
Skip directly to a location on a DVD.  
15) MENUbutton  
5) MEMORY button  
When the  
symbol appears on the screen, it indicates that the function or operation  
In stop mode, enter the number of a  
attempted is not available at that time. This occurs because the DVD manufacturer determines  
the specific functions of DVDs. Certain functions may not be available on some DVDs. Be  
sure to read the documentation provided with the DVD.  
Open and close DVD menu.  
X 2  
X 4  
X 8  
X 20  
Note:  
Unit  
Warnings:  
• It could only be recharged when the unit is OFF and using the AC adapter.  
• The rechargeable battery cannot be recharged when the unit is ON.  
Cautions:  
You also can press and hold  
fast scan speeds.  
2. Press the  
/
(PREV/NEXT) buttons repeatedly to select different  
Icons Used on DVDs  
Sample lcons  
PLAY button when you reach the desired point to resume playback at normal  
16  
15  
1. English  
2. French  
• The included AC adapter is for use with this unit only. Do not use them with other equipment.  
• When the unit is not going to be used for long time, disconnect the AC adapter from the AC  
outlet.  
• When the AC adapter is plugged in, the apparatus is not completely disconnected from the  
main, even when the power is turned off.  
2
Language selections for audio  
speed.  
1
1. English  
2. French  
2
Language selections for subtitles  
Screen aspect ratio  
14  
13  
12  
11  
SKIP (Forward / Reverse)  
While you are playing a disc, press the  
chapter or track. Press the  
automatically start playing it.  
LB  
NEXT button to move to the beginning of the next  
PREV button to move to the previous chapter or track and  
Multiple camera angles  
Region code indicator  
2
Condition and attention:  
• When rechargeable battery power is low, the unit will stop playing.  
• Do not short-circuit the terminals.  
• Recharge the battery when you are ready to use it again.  
• While using the rechargeable battery, the environmental temperature should be 5°C (41°F) to  
35°C (95°F).  
To get the longest service life of the rechargeable battery, charge at indoor-temperature.  
• Never dispose the rechargeable battery in fire or water. Never heat up the rechargeable battery.  
• Do not open the rechargeable battery, refer servicing only to qualified service personnel.  
2
3
4
DVD  
Note:  
Audio selection  
When playing back a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played,  
but the graphic images will not be shown.  
On some discs, the sound is recorded in two or more formats. Follow the directions below  
to select the type of playback.  
1. While a disc is playing, press the AUDIO button to  
10  
9
5
6
7
8
Title, Chapter and Tracks  
show the current audio format number.  
: [1ENG  
5.1CH]  
T
DVDs are divided into “titles” and “chapters”. If  
the disc has more than one movie on it, each movie  
would be a separate “title”. “Chapters” are sections  
of titles.  
2. Press the AUDIO button repeatedly to select the desired  
1) TFT cover  
STOP button  
Turning on the unit  
1. Slide the POWER ON/OFF switch on the front of the unit to the "ON"  
position.  
audio format.  
Chapte r 1 Chapte r 2 Chapte r 3  
Chapter 1 Chapter  
2
2) Rechargeable battery  
3) DC IN 9V / Car Plug 12V jack  
4) AUDIO OUT L / R jacks  
VOL MAX  
Stop playing a disc.  
Notes :  
9)  
PLAY button  
• If only one audio format is recorded, the number does not change.  
• About two seconds later, playback continues in the new audio format.  
Press to start or resume playback a disc.  
Audio CDs are divided into “tracks”. A “track” is  
2. The DVD logo (start-up picture) will appear on the screen.  
10) Disc Door  
usually one song on an Audio CD.  
Track 1  
Track  
2
Track 3  
Track 4  
Track 5  
Adjust the VOLUME to MAX when  
connecting the unit to another device.  
VIDEO OUT jack  
11) POWER ON / OFF switch  
12) POWER ON indicator  
Note :  
DVD  
Numbers identify each title, chapter, and track on a disc. Most discs have these numbers  
recorded on them, but some do not.  
When the POWER ON / OFF switch is in  
the ON position, the light will illuminate.  
13) CHARGING indicator  
Subtitle selection  
5) Headphone jack  
6) VOLUME + / - controls  
Adjust the volume.  
1. While a DVD is playing, press the SUBTITLE / RETURN button to  
display the current language setting, as shown in the example below.  
2. Press the SUBTITLE / RETURN button repeatedly to select the desired  
subtitle language.  
CONNECTIONS  
: [2ESP]  
Notes on Unauthorized Discs  
You may not be able to play some DVDs on this unit, particularly if they were purchased from  
outside your geographic area or made for business purposes.  
Charge the rechargeable battery before  
using them for the first time. The normal  
charging time should be completed at  
least 4-5 hours. The green charging light  
will go out when the battery becomes fully  
charged.  
A. Connecting a TV  
7)  
PREV button  
Press PREV button to go back to  
If your TV has audio/video inputs, you can also connect the unit to your TV using an  
audio/video cable.  
previous chapters /tracks. Press and  
Notes :  
You must adjust the VOLUME to  
hold  
PREV button to begin fast scan.  
MAXIMUM when you connect this  
• If only one language is recorded, the language does not change.  
NEXT button  
unit to other equipment.  
• About two seconds later, playback continues with the new subtitle you selected.  
• The number of languages recorded differs depending on the disc.  
• If no button is pressed within a few seconds, playback continues without changing the  
current subtitle.  
• This function can only be used for discs on which subtitles have been recorded in multiple  
languages.  
TV  
Press  
NEXT button to advance  
14) Remote sensor  
ACCESSORIES  
Put down the TFT cover when the  
chapters / tracks. Press and hold  
NEXT button to begin fast scan.  
PAUSE button  
Receives the remote control unit signals.  
15) BRIGHTNESS button  
playback mode is chosen.  
R
AUDIO  
IN  
Please check and identify the supplied accessories.  
To order accessories contact web site (http://www.venturersupport.com/pvs1262)  
ToVIDEO/AUDIO  
OUT jacks  
8)  
Adjust the relative lightness or darkness  
of the colour.  
L
Watching a DVD on your TV  
1. Turn on the unit.  
2. Turn on the TV and set it to DVD  
mode.  
Press to pause playback of disc. Each  
time you press the PAUSE button the  
picture advances one frame. Press the  
Remote with battery ....................................................................................... x 1  
AC adapter ................................................................................................... x 1  
Rechargeable battery ..................................................................................... x 1  
16) Screen switch  
VIDEO  
IN  
• On some DVDs, subtitles are activated from the main menu of the DVD. Press the MENU  
button to activate the main menu.  
WIDE : Wide screen  
PLAY  
button to resume playback.  
NORMAL : Normal screen  
AUDIO /VIDEO cable (not supplied)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E - 4  
E - 2  
E - 3  
E - 5  

Thales Navigation GPS Receiver CGRS User Manual
Toastmaster Bread Maker TBR20H User Manual
Toyota Automobile 2009 4Runner User Manual
Traulsen Refrigerator ARI132HUT FHS User Manual
Traulsen Refrigerator VPS48S User Manual
Tripp Lite TV Cables s456 003 User Manual
Verbatim Network Card Pretec User Manual
Viper Automobile Alarm 591XV User Manual
VIPowER Computer Hardware VP 6020 User Manual
Vivitar Camera Flash VIV DF 183 User Manual