VEC415_Manual_NP_032806 4/18/06 12:20 PM Page 8
VEC415
TW O YEAR LIMITED WARRAN TY PRO GRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than
those described herein. Any implied warranty of merchantability or fitness for a particular purpose on
this product is limited in duration to the duration of this warranty.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in
materials and workmanship for two years from the date of purchase without additional charge. The
warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for
any amount of damage in excess of the retail purchase price of the product under any circumstances.
Incidental and consequential damages are specifically excluded from coverage under this warranty.
Slim Po1w0 0eWra tItnverter
This product is not intended for commercial use. This warranty does not apply to damage to units from
misuse or incorrect installation/ connection. Misuse includes wiring or connecting to improper polarity
power sources.
w ith USB Cha rg ing Port
RETURN/ REPAIR POLICY: Defective products may be returned to manufacturer. Any defective product
that is returned to manufacturer within 30 days of the date of purchase will be replaced free of charge.
If such a product is returned more than 30 days but less than two years from the purchase date,
manufacturer will repair the unit or, at its option, replace it, free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer’s option.
A unit may be replaced with a new or reconditioned unit of the same or comparable design. The
repaired or replaced unit will then be warranted under the terms of the remainder of the warranty
period. The customer is responsible for the shipping charges on all returned items. During the warranty
period, manufacturer will be responsible for the return shipping charges to the customer in the United
States.
LIMITATIONS: This warranty does not cover accessories, such as charging adapters, bulbs, fuses and
batteries, damage or defects resulting from normal wear and tear (including chips, scratches, abrasions,
discoloration or fading due to usage or exposure to sunlight), accidents, damage during shipping to our
service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow
instructions for care and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department toll free at (866)
584-5504 for general repair information and charges if applicable. You may also contact us through
our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations
on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential
damages, so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser
specific legal rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax
or mail (see below). We suggest that you keep the original packaging in case you need to ship the unit.
When returning a product, include your name, address, phone number, dated sales receipt (or copy)
and a description of the reason for return and product serial number. After repairing or replacing the
unit, we will make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector
Manufacturing. Enter “VEC415” as Model and “100 Watt Slim Power Inverter” as Product Type. All
Vector products must be registered within 30 days of purchase to activate this warranty. Mail the
completed registration form, along with a copy of the original sales receipt, to:
USER’S MAN UAL
& WARRAN TY IN FO RMATIO N
ATTN.: CUSTOMER SERVICE
4140 SW 30th Ave., Ft. Lauderdale, FL 33312
• TOLL FREE: (866) 584-5504 • FAX: (954) 584-5556 •
IMPO RTAN T SAFETY IN FO RMATIO N , SAVE THESE IN STRUCTIO N S
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIO NAL MANUAL. THIS MANUAL CO NTAINS IMPO RTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
WARRANTY IS NON-TRANSFERABLE.
BD032806
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312
Toll Free: (866) 584-5504
© 2006 VECTOR MANUFACTURING
MADE IN CHINA
w w w .ve cto rm fg .co m
8
Download from Www.Somanuals.com. All Manuals Search And Download.
VEC415_Manual_NP_032806 4/18/06 12:20 PM Page iv
TABLE O F CO N TEN TS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How This Inverter Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
2
2
3
4
4
4
4
4
5
5
6
6
6
6
6
6
7
7
MAXX SST Soft Start Technology® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
®
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Source Requirements and Runtimes . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rated Versus Actual Current Draw of Equipment . . . . . . . . . . . . . . . . . . . . . . .
Operation of the 115 Volt AC Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation of the USB Power Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protective Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuse Replacement (DC Accessory Adapter) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Common Audio/ Visual Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fault LED Lights/ Alert Buzzer Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Common Power Output Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IN TRO DUCTIO N
Thank you for purchasing the VEC 4 1 5 1 0 0 Wa tt Slim Po w e r In ve rte r w ith
USB Ch a rg in g Po rt. This inverter can be used to operate personal electronics and
mobile office equipment, such as: laptop computers, digital/ video cameras, MP3
players, cell phones, PDAs, and more. It can also be used to recharge 110/ 120 volt
AC devices that have an appropriate recharging adapter with a standard North
American two- or three-prong plug.
Please read this User’s Manual carefully before use to ensure optimum performance
and to avoid damage to this product.
FEATURES
• 100 watts output
®
• MAXX SST Soft Start Technology®
• Plug and play
• Electronic circuit protection prevents damage due to overload/ insufficient ventilation
(overheat condition)
• Low-battery protection — unit automatically shuts down when battery discharges
below 10.7 volts
• Automotive and airplane 12 volt DC adapters
• 5 volt DC USB power port
• Manual ON/ OFF Pushbutton with Bi-color Power/ Fault LED
• Audible fault warning
• Compact size, efficient and quiet
• Convenient carrying case
• Airplane Adapter
1
Download from Www.Somanuals.com. All Manuals Search And Download.
VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 2
DC. The second stage is a MOSFET bridge stage that converts the high voltage DC
into 115 volts, 60 Hz AC.
Co n tro ls a n d Fu n ctio n s
The DC-to-DC converter stage uses creative, high frequency, zero voltage switching
power conversion techniques that replace the bulky transformers found in less
technologically advanced models.The inverter stage uses advanced power MOSFET
transistors in a full bridge configuration.
1
Slim Po w e r In ve rte r O utp ut Wa ve fo rm
The AC output waveform of this inverter is known as a modified sine wave. It is a
stepped waveform that has characteristics similar to the sine wave shape of utility
power. This type of waveform is suitable for most AC loads, including linear and
switching power supplies used in electronic equipment, transformers, and small motors.
The modified sine wave produced by this inverter has an RMS (root mean square)
voltage of 115 volts. Most AC voltmeters (both digital and analog) are sensitive to
the average value of the waveform rather than the RMS value. They are calibrated
for RMS voltage under the assumption that the waveform measured will be a pure
sine wave. These meters will not correctly read the RMS voltage of a modified sine
wave. Non-TRUE RMS meters will read about 20 to 30 volts low when measuring the
output of this inverter. For accurate measurement of the output voltage of this unit, use
a TRUE RMS reading voltmeter such as a Fluke 87, Fluke 8080A, Beckman 4410 or
Triplett 4200.
1 1 5 vo lt AC O utp ut
2
3
5
4
1 . INVERTER CARRY CASE
2 . USB PO W ER PO RT
CAUTIO N
Re ch a rg e a b le De vice s
3 . O N/ O FF PUSHBUTTO N/
BI-CO LO R PO W ER/ FAULT LED
4 . STANDARD NO RTH AMERICAN
• Certain rechargeable devices are designed to be charged by plugging them
directly into an AC receptacle. These devices may damage the inverter or the
charging circuit.
1 1 5 VO LT AC O UTLET
6
5 . 1 2 VO LT DC/ AIRPLANE ADAPTER
CO RD PO RT
• When using a rechargeable device, monitor its temperature for the initial ten
minutes of use to determine if it produces excessive heat.
6 . DETACHABLE 2 -PRO NG 1 2 VO LT DC
ADAPTER CO RD
• If excessive heat is produced, this indicates the device should not be used with this
inverter.
7 . 1 2 VO LT DC VEHICLE ACCESSO RY
7
ADAPTER
8 . AIRPLANE ADAPTER CO RD
• This problem does not occur with most of the battery-operated equipment. Most of
these devices use a separate charger or transformer that is plugged into an AC
receptacle.
HO W THIS IN VERTER W O RKS
MAXX SST® So ft Sta rt Te ch n o lo g y®
This inverter is an electronic device that converts low voltage DC (direct current)
electricity from a battery to 115 volt AC (alternating current) household power. In
designing this inverter, Vector has incorporated design techniques previously
employed in computer power supplies. The result of these design innovations is a
smaller, lighter and easier-to-use power inverter.
Vector’s Soft Start Technology gradually “ramps up” the inverters power to slowly start
appliances that require a surge to get started. This gradual ramp up protects the
inverter and the appliance, as well as the power source, from damage and failure.
The Slim Power Inverter converts power in two stages. The first stage is a DC-to-DC
conversion process that raises the low voltage DC at the inverter input to 145 volts
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 4
4. Rotate the plug slightly to make sure there is good contact.
5. Push the ON/ OFF pushbutton to turn the unit ON.
O PERATIN G IN STRUCTIO N S
Once properly connected to a 12 volt DC power source, the ON/ OFF switch controls
power to the unit. The bi-color LED indicator lights blue when the inverter is connected
to DC power and the power pushbuton is set to ON. (If the bi-color LED indicator
lights red, refer to the “Troubleshooting” section on page 7 of this manual.)
6. The LED in the ON/ OFF Pushbutton will light blue, indicating a proper connection.
7. If the inverter does not work, make sure the ignition/ accessory switch is actually
powering the accessory outlet. Some vehicles require the ignition switch to be
turned on.
ALWAYS TURN THE INVERTER ON BEFORE THE CONNECTED DEVICE.
8. Plug the USB-powered device into the inverter’s USB Power Port and operate
normally.
The standard North American 115 volt AC and USB outlets allow the user to operate
multiple devices simultaneously. Simply plug the equipment into the unit and operate
normally.
N o te : En su re w a tta g e o f a ll e q u ip m e n t sim u lta n e o u sly p lu g g e d in to th e VEC4 1 5 d o e s
n o t e x ce e d 1 0 0 w a tts co n tin u o u s.
N o te s: Th is in ve rte r ’s USB Po w e r Po rt d o e s n o t su p p o rt d a ta co m m u n ica tio n . It o n ly
p ro vid e s
d e vice .
5
vo lts/ 5 0 0 m A DC m a x im u m p o w e r to a n e x te rn a l USB-p o w e re d
USB p o w e r o u tp u t is n o t co n tro lle d b y th e O N / O FF Po w e r p u sh b u tto n . USB
p o w e r is a lw a y s o n w h e n th e Po w e r Co rd is co n n e cte d to a 1 2 vo lt DC p o w e r
so u rce . Re m e m b e r to d isco n n e ct th e Po w e r Co rd fro m a n y p o w e r so u rce w h e n
th e u n it is n o t in u se .
Ra te d Ve rsu s Actu a l Cu rre n t Dra w o f Eq u ip m e n t
Most electrical tools, appliances, electronic devices and audio/ visual equipment have
labels that indicate the power consumption in amps or watts. Be sure that the power
consumption of the item to be operated is below 100 watts. If the power consumption
is rated in amps AC, simply multiply by the AC volts (115) to determine the power.
Pro te ctive Fe a tu re s
The inverter monitors the following conditions:
Resistive loads are the easiest for the inverter to run; however, it will not run larger
resistive loads (such as electric stoves and heaters), which require far more wattage
than the inverter can deliver. Inductive loads (such as TVs and stereos) require more
current to operate than do resistive loads of the same wattage rating.
Low Battery Voltage — This condition is not harmful to the inverter, but could damage
the power source, so the inverter will automatically shut down when input voltage
drops below 10.7 volts DC.
Input Voltage Too High — The inverter will automatically shut down when DC input
voltage exceeds 15.0 volts, as this can harm the unit.
For safety reasons, the unit will simply shut down if it is overloaded. To restart the unit,
simply remove the load and press the ON/ OFF pushbutton to reset.
Thermal Shutdown Protection — The inverter will automatically shut down when the
unit becomes overheated.
O p e ra tio n o f th e 1 1 5 Vo lt AC O u tle t
Overload/ Short Circuit Protection — The inverter will automatically shut down when
a short circuit occurs.
1. Connect the Power Cord to the inverter.
2. Connect either the 12 Volt DC Vehicle Accessory Adapter or the 12 Volt DC
Airplane Adapter to the end of the 12 Volt Power Cord.
AC Ground Leakage — The inverter will automatically shut down when leakage
current exceeds safety level.
N o te s: Th e LED in th e O N / O FF Pu sh b u tto n w ill lig h t re d to in d ica te a Fa u lt co n d itio n
b e fo re a u to m a tic sh u td o w n o ccu rs.
3. Insert the selected adapter Plug into a vehicle’s (or other 12 volt DC power
source’s) DC accessory outlet or airplane DC power outlet.
4. Rotate the vehicle accessory plug slightly to make sure there is good contact.
5. Push the ON/ OFF Pushbutton to turn the Inverter ON.
If u n it sh u ts d o w n , tu rn it O FF, re m o ve th e lo a d , w a it a fe w m in u te s, th e n tu rn
it b a ck O N .
6. The LED in the ON/ OFF Pushbutton will light blue, indicating a proper connection.
O p e ra tin g Tip s
7. If the Inverter does not work, make sure the ignition/ accessory switch is actually
powering the accessory outlet. Some vehicles require the ignition switch to be
turned on.
The 1 0 0 Wa tt Slim In ve rte r should only be operated in locations that are:
DRY — Do not allow water or other liquids to come into contact with the inverter.
COOL — Surrounding air temperature should ideally be 0-40°C (32-104°F). Keep
the inverter away from direct sunlight, when possible.
8. Plug the (110/ 120 volt AC) appliance into the Inverter’s three-prong AC outlet
and operate normally.
WELL-VENTILATED — Keep the area surrounding the inverter clear to ensure free air
circulation around the unit. Do not place items on or over the inverter during
operation. The unit will shut down if the internal temperature gets too hot. The inverter
can be reset after it cools down.
N o te : Th e In ve rte r w ill n o t o p e ra te a p p lia n ce s a n d e q u ip m e n t th a t g e n e ra te h e a t,
su ch a s h a ir d ry e rs, e le ctric b la n k e ts, m icro w a ve o ve n s a n d to a ste rs.
O p e ra tio n o f th e USB Po w e r Po rt
1. Connect the Power Cord to the inverter.
SAFE — Do not use the inverter near flammable materials or in any locations that may
accumulate flammable fumes or gases. This is an electrical appliance that can briefly
spark when electrical connections are made or broken.
2. Connect either the 12 Volt DC Vehicle Accessory Adapter or the 12 Volt DC
Airplane Adapter to the end of the 12 Volt Power Cord.
3. Insert the selected adapter Plug into a vehicle’s (or jump-starter’s) DC accessory
outlet or airplane DC power outlet.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
VEC415_Manual_NP_032806 4/18/06 12:21 PM Page 6
Co m m o n Po w e r O u tp u t Pro b le m s
CARE AN D MAIN TEN AN CE
Po ssib le Ca use s
Re co m m e n d a tio n s
Sto ra g e
Battery voltage
below 10.7 volts
Recharge battery or check
DC power supply.
1. Ideal storage temperature range is 0-40°C (32-104°F).
2. Store and use the 1 0 0 Wa tt Slim Po w e r In ve rte r in a cool, dry place with
Equipment being operated
draws too much power
Reduce load to maximum 100 watts.
adequate ventilation for all-around air circulation.
3. Avoid locations that are exposed to heating units, radiators, direct sunlight, or
excessive humidity or dampness.
Inverter in thermal
shutdown condition
Allow inverter to cool down. Ensure
there is adequate ventilation around
the unit, and the load is no more
Fu se Re p la ce m e n t (1 2 Vo lt DC Acce sso ry Co rd )
1. Unscrew the cap of the barrel end of the 12 Volt DC Cord (turning counter-
clockwise) and lift off.
than 100 watts for continuous operation.
AC output is shorted
Disconnect the AC appliance. Press the
inverter ON/ OFF Power pushbutton to
turn the unit OFF. Wait a few seconds,
then press the pushbutton again to turn it
back ON.
2. Pull the fuse straight out.
3. Replace with a new 10 amp fuse.
4. Screw the cap back onto the plug (turning clockwise).
TRO UBLESHO O TIN G
SPECIFICATIO N S
Output Power:
Co m m o n Au d io / Visu a l Pro b le m s
Problem: Buzzing Sound in Audio Systems
100 watts continuous
Output Voltage (RMS):
Output Frequency:
Output Waveform:
DC Input :
115 volts AC ±10%
60Hz ±3Hz
Some inexpensive stereo systems and boom boxes make a buzzing sound when
operated from the inverter, because the power supply in the electronic device does
not properly filter the modified sine wave produced by the inverter. The only solution
to this problem is to use a sound system that has a higher quality power supply.
Modified Sine Wave (MSW)
13.8VDC, 8 Amps
>85%
Problem: Television Interference
The 1 0 0 Wa tt Slim Po w e r In ve rte r is shielded to minimize interference with TV
signals. However, in some instances, some interference may still be visible, especially
when the TV signal is weak. Try the following to improve the picture:
Efficiency:
Low Voltage Audible Alarm:
Low Voltage Shutdown:
<11 Volts Input Voltage
<10.7 Volts Input Voltage
1. Move the 100 Watt Inverter as far away as possible from the TV set, the antenna,
and the antenna cables. Use a short AC extension cord, if necessary.
Operating/ Storage Temperature: 0-40°C (32-104°F)
2. Adjust the orientation of the antenna cables, and the TV power cord to minimize
interference.
Operating/ Relative Humidity:
5-95% non-condensing
3. Make sure that the antenna feeding the TV provides an adequate (snow-free)
signal and that high quality, shielded antenna cable is used.
Fa u lt LED Lig h ts/ Ale rt Bu zze r So u n d s
When the Power/ Fault LED turns from blue (indicating the unit is powered) to red and
the alert buzzer sounds, a fault condition is present and the unit will automatically shut
down shortly. See “Protective Features” on page 5 and “Common Power Output
Problems” below.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|