7.1 Channel PCIe Sound Card
User Manual
Model: UGT-S110
All brand names and trademarks are properties of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
z
z
Installation Guide x 1
Driver CD x 1
* User’s Manual Is on Driver CD
Note: Contents may vary depending on the market/country.
Hardware Installation
1.
Turn off the computer, Unplug the power cord.
2.
Open the computer case. Check with your computer
manufacturer if you need additional instructions. Remove any old
third-party sound cards or the metal PCIe slot bracket.
Insert the sound card into a blank PCIe slot. Make sure that all of
its pins are touching the PCIe slot’s contacts.
3.
4.
Check the sound card is inserted into the PCIe slot firmly, and
secure it with a screw.
5.
6.
Close the case. Plug in the power cord and other cables.
Connect the Mini-DIN to 3.5mm fan-out cable bundled in this
package and use for 8-channel line output jack.
Software Installation
For Windows® 2000/ XP/2003/Vista/7 (32/64 bit)
UGT‐S110
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
Start your PC, place the Driver CD into the CD-ROM drive.
Click the Start button on the taskbar and click Run. Type
“D:\UGT-S110\2000_XP_2003_Vista_7\Setup.exe”.
(Assuming you have placed the CD in CD-ROM drive labeled as
D).
Follow any on-screen instructions to complete the software
installation.
3.
4.
Restart your system.
Once you have rebooted the computer, this 7.1 Channel PCIe
Sound card is ready to be used.
Physical Connections
UGT‐S110
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
The rear panel of this 7.1 Channel PCIe Sound Card has the following
jacks:
1.
Line In (blue): Connect to tape/CD/DVD player, or other audio
sources for output mixing and/or recording
2.
3.
MIC In (pink): Connect to microphone
Line Out (green): Connect to headphone or amplifying speakers.
In 4-channel, 6-channel, and 8-channnel configurations, the
function of this port becomes Front Speaker Out
4.
Rear-Speaker/Surround-Speaker (black): Connect to Rear
speakers while 4/6/8 channel speaker mode is enabled (via
external amplifier)
UGT‐S110
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
Center/Subwoofer (orange): Connect to center/subwoofer
speakers while 6/8 channel speaker mode is enabled (via external
amplifier)
6.
7.
Back-Speaker (gray): Connect to back speakers while 8 channel
speaker mode is enabled (via external amplifier)
S/PDIF Out: Connect to digital input of external audio device
via an optical S/PDIF cable
Please refer to the audio configuration table below for the function of
the audio ports in 2, 4, 6, 8-channel configuration.
UGT‐S110
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Port
2-channel
4-channel
(*)
6-channel
8-channel
Green
Black
Orange
Gray
Line Out
Front
Speaker
Rear
Front
Front
Speaker
Rear
Speaker
Rear
-
-
-
Speaker
-
Speaker
Center
Speaker
Center
/Subwoofer /Subwoofer
-
-
Back
Speaker
(*) 4-Channel mode is not available on Vista/7 (32/64 bit)
In addition to the rear panel jacks, this 7.1 Channel PCIe Sound Card
also has the following internal connection:
The Function
Analog CD/IN Port(Signals: L-G-G-R)
Analog CD/IN Port(Signals: G-R-G-L)
J3
J5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
The Vantec 7.1 Channel PCIe Sound Card comes with a 1 year
limited warranty(90 day parts). If your unit becomes defective within
how to receive warranty exchange or repair. Cosmetic defects and
missing parts are not covered under this warranty. Please check the
contents of the unit to make sure you received all parts. Also, check for
any cosmetic flaws. If any parts are missing or if there are cosmetic
defects, please contact the retailer from which you purchased the unit
immediately and ask for a replacement.
Vantec Thermal Technologies
UGT‐S110
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
|