| 7-Port USB 2.0 & FireWire 400   Combo PCI Host Card   User Manual   Model: UGT-UF100   All brand names and trademarks are properties of their respective owners.   w w w . v a n t e c u s a . c o m   Download from Www.Somanuals.com. All Manuals Search And Download.   Package Contents   z z z 1 x 7-Port USB 2.0 FireWire 400 Combo PCI Host Card   1x 1394a DV cable (6-pin to 4-pin)   1 x User’s Manual   System Requirements   z Windows® 2000/XP/Server 2003/Vista   z Available PCI slot   Hardware Description   3 UGT-UF100   Page 3   Download from Www.Somanuals.com. All Manuals Search And Download.   Hardware Installation   1. Turn Off the power to your computer.   2. Unplug the power cord and remove your computer’s cover.   3. Remove the slot bracket from an available PCI slot   4. To install the card, carefully align the card’s bus connector   with the selected PCI slot on the motherboard. Push the   board down firmly.   5. Connect the system power source to the board’s power   connector.   6. Replace the slot bracket’s holding screw to secure the card.   4 UGT-UF100   Page 4   Download from Www.Somanuals.com. All Manuals Search And Download.   7. Replace the computer cover and reconnect the power cord.   Driver Installation   For Windows® XP/2000   Windows® 2000/XP will automatically detect and install the   correct driver for the PCI USB 2.0 & IEEE 1394a Combo.   However, please ensure you have the latest Service Pack   Installed.   For Windows® XP   z Windows® XP Service Pack 1 or later   For Windows® 2000   z Windows® 2000 Service Pack 4 or later   For Windows® Server 2003/Vista   Windows® Server 2003 has built-in driver support for this   controller. Just install the board and Windows will automatically   detect and install the correct drivers for it. No additional driver is   necessary.   5 UGT-UF100   Page 5   Download from Www.Somanuals.com. All Manuals Search And Download.   To Verify Windows Installation   1. Right click My Computer, then click Manage. Click Device   Manager.   2. Double click IEEE 1394 Bus host controllers option and a   VIA OHCI Compliant IEEE 1394 Host Controller should   be displayed   3. Double click Universal Serial Bus controllers option.   - USB Root Hub (USB 2.0 Root Hub in Windows® 2000)   - USB Root Hub   - USB Root Hub   - VIA Rev 5 or later USB Universal Host Controller   (VIA USB Universal Host Controller in Windows® 2000)   - VIA Rev 5 or later USB Universal Host Controller   (VIA USB Universal Host Controller in Windows® 2000)   - VIA USB Enhanced Host Controller   6 UGT-UF100   Page 6   Download from Www.Somanuals.com. All Manuals Search And Download.   7 UGT-UF100   Page 7   Download from Www.Somanuals.com. All Manuals Search And Download.   |