User’s manual
TL86009
DECT 6.0 expansion handset
for use with AT&T model
TL86109
corded/cordless telephone/
answering system with
BLUETOOTH® wireless technology
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts checklist
Your telephone package contains the following items.
User’s manual
TL86009
DECT 6.0 expansion handset
for use with AT&T model
TL86109
corded/cordless telephone/
answering system with
BLUETOOTH® wireless technology
User’s manual
Cordless handset
Charger for cordless
handset with power
adapter installed
Battery for cordless
handset
Battery compartment
cover
Belt clip for
cordless handset
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual
TL86009
DECT 6.0 expansion handset
for use with AT&T model
TL86109
corded/cordless telephone/
answering system with
BLUETOOTH® wireless technology
Table of contents
Getting started
Precautions for users
of implanted cardiac
Installation....................................... 1
Quick reference guide............... 2
Charger installation..................... 5
Battery installation and
pacemakers.............................26
Pacemaker patients.............26
Especially about telephone
answering systems...............26
charging............................................ 6
For C-UL compliance.................27
Battery charging........................... 8
Mesures de sécurité
Belt clip & optional headset... 9
importantes..............................27
FCC Part 68 and ACTA.............30
FCC Part 15...................................32
Adding handset to your
telephone base
Adding and registering
handsets.........................................10
Expand your telephone
system..............................................11
Add and register a
handset......................................11
Replace a handset.....................12
California Energy Commission
battery charging testing
instructions......................................33
Limited warranty.........................34
Technical specifications..........37
DECT 6.0 digital
technology...............................37
Telephone operating
range...........................................38
Extended range and
clarity..........................................38
Appendix
Troubleshooting..........................13
Maintenance..................................23
Important safety
information....................................24
Safety information................24
Especially about corded
telephones...............................25
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Installation
You must install and
charge the handset
battery before using
the cordless handset.
See pages 6-8 for easy
instructions.
Your product may be shipped with a protective sticker covering
the handset display - remove it before use.
For customer service or product information, visit our website at
In Canada, dial 1 (866) 288-4268.
Avoid placing the telephone base too close to:
• Communication devices such as television sets, VCRs, or other
cordless telephones.
• Excessive heat sources.
• Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting.
• Excessive dust sources such as a workshop or garage.
• Excessive moisture.
• Extremely low temperature.
• Mechanical vibration or shock such as on top of the washing
machine or work bench.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Quick reference guide
Softkeys (2)
Press to select a menu item
displayed above the key.
OFF/CLEAR
While using menus, press
to cancel an operation,
back up to the previous
menu, or exit the menu
display. Press and hold to
return to idle mode.
CHARGE light
(blue ring around
DIR/ /VOL/ /CID)
On when the handset is
charging in the charger.
While entering names or
numbers, press to delete a
digit or a character.
DIR/ /VOL
Press to scroll up while
in menus.
During a call, press to
hang up.
Press to increase the
volume level during a call.
Press to show directory
entries when the telephone
is not in use.
VOL/ /CID
Press to scroll down while
in menus.
While entering names or
numbers, press to move
the cursor to the right.
Press to decrease the
volume level during a call.
Press to show the
caller ID history when the
telephone is not in use.
CELL
Press to make or answer a
cell call.
While entering names or
numbers, press to move
the cursor to the left.
Flashes quickly when there
is an incoming cell call.
Flashes slowly when a cell
call is on hold.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Quick reference guide
1 LINE/FLASH/
2 LINE/FLASH
1
Press 1 LINE/FLASH
to make or answer a
call on line 1. During a
call, press to answer an
incoming call on line 1
when you receive a call
waiting alert.
While reviewing a caller
ID history entry, press
repeatedly to add or
remove 1 in front of
the telephone number
before dialing or saving
it in the directory.
Press 2 LINE/FLASH
to make or answer a
call on line 2. During a
call, press to answer an
incoming call on line 2
when you receive a call
waiting alert.
TONE
Press to switch to tone
dialing temporarily
during a call if you have
pulse service.
#
Press repeatedly to
display other dialing
options when reviewing
a caller ID history entry.
/SPEAKER
Press to turn on the
handset speakerphone.
Press again to resume
normal handset use.
REDIAL/PAUSE
Press to view the
redial list.
While entering numbers,
press and hold to insert
a dialing pause.
HOLD
Press to put a call
on hold.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Quick reference guide
EQ
During an outside call, intercom
call, message or announcement
playback, press to change the
quality of the audio to best suit
your hearing.
Press the MENU softkey to
enter the main menu which
includes the following:
PLAY MESSAGES
ANSWERING SYS
DIRECTORY
CALL LOG
INTERCOM
RINGER
SETTINGS
WEBSITE
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Charger installation
Install the charger, as shown below.
Plug the power adapter into an electrical outlet
not controlled by a wall switch.
IMPORTANT INFORMATION:
1. Use only the power adapter provided with this product. To obtain a
replacement, visit our website at www.telephones.att.com or
call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Battery installation and charging
Install the battery, as shown below.
Step 1
Step 2
Plug the battery connector
securely into the socket inside
the handset battery compartment,
matching the color-coded label.
Insert the supplied
Align the cover flat
against the battery
compartment, then
slide it upwards until
it clicks into place.
battery with the label
THIS SIDE UP facing up,
as indicated.
1
G P 0 8 4
E S .
E S . P I L
e
U T
L E S
T T E R I
A
c h i n
M H )
A
-
N i
L E
H
:
A h
P E R C E R
q u é e n
i
m
r
b
E N T
O U
V E R S
T É
4 0 0
V
F a
4
:
Ô
S S E M
n a
N É R E R
/
( 2 .
2
C
l e s
p i
C h i
I N C I i n
V E R T I
A
B U R N O R P U N C T U R E
B
B l o c -
A S
/
P
M a d e
N G
/
c k
N E
a
3 4 2 / B T 2 8 4 3 4
P
D O N O T
A R N I
W
B C T 1 E 8 4
y
e r
T H I S S I D E U P
/
B a t t
Step 3
Charge the handset by placing
it face up in the charger. The
CHARGE light is on when charging.
CHARGE light
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Battery installation and charging
After you install your telephone or power
returns following a power outage, the handset
will prompt you to set the date and time. To skip
SET DATE
--/--/--
MM/DD/YY
setting the date and time, press
OFF/CLEAR.
SET
SET TIME
--:-- --
SET
To replace the battery, press the tab and slide
the battery compartment cover downwards. Lift
out the old battery and disconnect it from the
handset. Follow the instructions on page 6 to
install and charge the new battery.
IMPORTANT INFORMATION:
1. Use only the supplied rechargeable battery or replacement battery (model
BT166342/BT266342). To order, visit our website at
In Canada, dial 1 (866) 288-4268.
2. If you do not use the handset for a long time, disconnect and remove the
battery to prevent possible leakage.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Battery charging
Once you have installed the battery, the screen indicates the battery
status (see the following table). If necessary, place the handset
in the charger to charge the battery. For best performance, keep
the handset in the charger when not in use. The battery is fully
charged after 16 hours of continuous charging. See the table on
page 37 for battery operating times.
If the screen shows Low battery, you need to charge the battery
without interruption for at least 25 minutes to give the handset
enough charge to use the telephone for a short time. The
following table summarizes the battery charge indicators and
actions to take.
Battery indicators
Battery status
Action
The screen is blank or
The battery has very little
Charge without
shows Place in charger. or no charge. The handset interruption until the
cannot be used.
screen shows
Low battery or
HANDSET X (at least
five minutes).
The screen shows
Low battery and
flashes.
Battery has enough
charge to be used for a
short time.
Charge without
interruption until
the screen shows
HANDSET X (at least
25 minutes).
The screen shows
HANDSET X.
Battery is charged.
To keep the battery
charged, place it in
the charger when not
in use.
NOTE: If you are on a phone call in low battery mode, you hear four short
beeps every minute.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Belt clip & optional headset
To remove the belt clip:
To attach the belt clip:
Gently lift either of the
belt clip tabs, shown
in the figure, outwards
to remove the belt clip
from the handset.
Snap the belt clip
into the slots on both
sides of the handset, as
shown in the figure.
For handsfree telephone conversations, you can use any industry
standard 2.5 mm headset (purchased separately). For best
results, use an AT&T 2.5 mm headset. To purchase a headset,
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Lift the plastic
cover here.
Plug a 2.5 mm headset
into the jack on the side
of handset (beneath the
small plastic cover).
Side of handset
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding handset to your telephone base
Adding and registering handsets
Before using a new TL86009 handset, you must register it with
the AT&T TL86109 telephone system (purchased separately).
The AT&T TL86109 telephone system can accommodate up to
12 handsets.
The handset provided with the TL86109 comes registered as
HANDSET. You can register up to 11 additional handsets to the
telephone base, and they will be assigned numbers in the order
they are registered (HANDSET 2, HANDSET 3, HANDSET 4 and
so on). Your first handset is then renamed as HANDSET 1.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding handset to your telephone base
Expand your telephone system
Add and register a handset
When first purchased, each expansion handset shows
Press [HOLD] on base for 4 sec, then press [#] on handset
after a battery is installed. Each handset should be charged
without interruption for at least 25 minutes before registering
to the telephone base. For more details on battery charging,
see the table on page 8.
To register a handset:
1. Press and hold HOLD on the
telephone base for about
four seconds until it shows
Registering...Please wait.
Then, release the button.
2. Press # (pound key) on the
handset. Its screen shows
Registering handset... and
it takes up to 60 seconds to
complete the registration. The
handset and telephone base
show HANDSET X Registered (X represents the handset
number assigned) and you hear a beep when the registration
completed.
NOTES:
•
If the registration fails, the handset shows Registration failed for a few
seconds and then Press [HOLD] on base for 4 sec, then press [#] on
handset. Try the registration process again.
•
•
You cannot register a handset if any other system handset is in use.
You cannot register more than 12 handsets to the telephone base.
Registration slots are full shows on the base screen while you are in
step 2.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding handset to your telephone base
Replace a handset
If you want to replace a handset or reassign the designated
handset number of a registered handset, you must deregister all
the handsets and then individually register each handset.
To make deregistration easier, read all of the instructions on this
page before you begin.
To deregister all handsets:
1. Press and hold FLASH on the telephone base for about
4 seconds until it shows Deregister all handsets?
Then, release the button.
2. Press the Yes softkey to continue. You hear a confirmation tone
from the telephone base.
3. The telephone base displays PLEASE WAIT... All system
handsets show Out of range OR no power at base for a few
seconds, and then you hear a confirmation tone from
the handset.
4. All the handsets show Press [HOLD] on base for 4 sec, then
press [#] on handset when the deregistration completed.
The deregistration process takes about 10 seconds to complete.
If deregistration fails, you may need to reset the telephone and
try again.
To reset:
• Unplug the power from the telephone base, then plug it
back in.
After deregistering, register each handset individually. See
Add and register a handset on page 11.
NOTES:
•
You cannot deregister the handset(s) if any other system handset is
in use.
•
During deregistration, your DECT 6.0 headset(s) will also be
deregistered.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
If you have difficulty with your telephone, please try the
following suggestions. For customer service, or to purchase
accessories or replacement parts, visit our website at
In Canada, dial 1 (866) 288-4268.
My phone doesn’t work at all.
• Make sure the power cord is securely plugged in.
• Make sure that the battery connector is securely plugged into
the cordless handset.
• Make sure the telephone line cord is securely and firmly
plugged into the telephone cord line and the telephone
wall jack.
• Charge the battery in the cordless handset for at least 16
hours. For optimum daily performance, return the cordless
handset to the charger when not in use.
• If the battery is depleted, it may take approximately five
minutes to charge the handset before it shows Low battery.
See page 8 for details.
• Reset the telephone base. Unplug the electrical power. Wait
for approximately 15 seconds, then plug it back in. Allow up
to one minute for the cordless handset and telephone base
to reset.
• You may need to purchase a new battery. Please refer to
Battery installation and charging (pages 6-7) in this user’s
manual.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
The display shows NO LINE. I cannot get a dial tone.
• First try all the suggestions, as mentioned above.
• If the previous suggestions do not work, disconnect the
telephone line cord from your telephone and connect the
telephone line cord to another telephone.
• If there is no dial tone on that telephone either, your telephone
line cord may be defective. Install a new telephone
line cord.
• If changing the telephone line cord does not help, the wall
jack (or the wiring to this wall jack) may be defective. Try
using a different wall jack in your home to connect your
TL86109 telephone, or contact your telephone service
provider (charges may apply).
I cannot dial out.
• First try all the suggestions in the above entry.
• Make sure you have a dial tone before dialing. The cordless
handset may take a second or two to find the telephone base
and produce a dial tone. This is normal. Wait an extra second
before dialing.
• Eliminate any background noise. Noise from a television, radio
or other appliances may cause the phone to not dial out
properly. If you cannot eliminate the background noise, first
try muting the cordless handset before dialing, or dialing from
another room in your home with less background noise.
• If the other phones in your home are having the same
problem, the problem is in your wiring or local service.
Contact your telephone service provider (charges may apply).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
My cordless handset isn’t performing normally.
• Make sure the power cord is securely plugged into the
telephone base. Plug the power adapter into a different
working electrical outlet not controlled by a wall switch.
• Move the cordless handset closer to the telephone base. You
might have moved out of range.
• Reset the telephone base. Unplug the electrical power. Wait
for 15 seconds, then plug it back in. Allow up to one minute
for the cordless handset and telephone base to reset.
• Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
The handset registration is unsuccessful.
Follow the steps to register the handset again.
1. Make sure the handset is out of the charger and shows
Press [HOLD] on base for 4 sec, then press [#] on handset
before you begin.
2. Press and hold HOLD on the telephone base for about four
seconds until it shows Registering...Please wait.
Then, release the button.
3. Press # (pound key) on the handset. Its screen shows
Registering handset... and it takes up to 60 seconds to
complete the registration. The handset shows HANDSET X
Registered (X represents the handset number assigned) and
you hear a beep when the registration completed.
Refer to Add and register a handset on page 11 for details.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Out of range OR no power at base appears on my cordless
handset.
• Ensure that the telephone base is powered up.
• Move the cordless handset closer to the telephone base. You
might have moved out of range.
• Reset the telephone base. Unplug the electrical power. Wait
for 15 seconds, then plug it back in. Allow up to one minute
for the cordless handset and telephone base to reset.
• Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
The batteries do not hold a charge.
• If the cordless handset is in the charger and the charge light
does not come on, refer to The charge light is off (page 21)
in this Troubleshooting guide.
• Charge the battery in the cordless handset for at least 16
hours. For optimum daily performance, return the cordless
handset to the charger when not in use.
• If the battery is depleted, it may take approximately five
minutes to charge the handset before it shows Low battery.
See page 8 for details.
• You may need to purchase a new battery. Please refer to
Battery installation and charging (pages 6-7) in this
user’s manual.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
I get noise, static, or a weak signal even when I’m near the
telephone base.
• If you subscribe to high-speed Internet service (DSL - digital
subscriber line) through your telephone lines, you must install
a DSL filter between each telephone line cord and telephone
wall jack. The filter prevents noise and caller ID problems
caused by DSL interference. Please contact your DSL service
provider for more information about DSL filters.
• You may be able to improve the performance of your cordless
phone by installing your new telephone base as far as
possible from any other existing cordless telephone system
that may already be installed.
• Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
• Do not install this phone near a microwave oven or on
the same electrical outlet. You may experience decreased
performance while the microwave oven is operating.
• If your phone is plugged in with a modem or a surge
protector, plug the phone (or modem/surge protector) into a
different location. If this doesn’t solve the problem, relocate
your phone or modem farther apart from one another, or use
a different surge protector.
• Relocate your phone to a higher location. The phone may
have better reception when installed in a high area.
• If the other phones in your home are having the same
problem, the problem is in your wiring or local service.
Contact your telephone service provider (charges may apply).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
I experience poor sound quality when using the
speakerphone.
• For increased sound quality while using the speakerphone,
place the handset on a flat surface with the dial pad
facing up.
• When using a speakerphone, controlling background noise
in your environment is essential. While you are listening to
your party, press the MUTE softkey to temporarily turn your
microphone off. When it is your turn to speak, remember to
press the MUTE softkey again to turn the microphone on.
• Excessive background noise will cause a speakerphone to fade
in and out. Try controlling the background noise by turning off
any audio devices near the speakerphone. Also, try to avoid
interrupting the person at the other end of the conversation
while they are speaking. If background noise cannot be
controlled, you should terminate speakerphone operation and
return to normal handset mode.
I hear other calls while using my phone.
• Disconnect the telephone base from the telephone jack, and
plug in a different telephone. If you still hear other calls, the
problem is probably in your wiring or local service. Call your
telephone service provider.
While on a call or playing messages, there is too much noise,
or the voice sounds tinny, shrill or flat.
• While on a call or playing messages, press the EQ button
on the side of the handset until you find the settings that
sounds the best.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
My cordless handset does not ring when I receive a call.
• Make sure that the ringer is not turned off. Refer to
Ringer volume on your user’s manual.
• Make sure the telephone line cord is plugged securely into the
telephone base and the telephone jack. Make sure the power
cord is securely plugged in.
• The cordless handset may be too far from the telephone base.
• Charge the battery in the cordless handset for at least 16
hours. For optimum daily performance, return the cordless
handset to the charger when not in use.
• You may have too many extension phones on your telephone
line to allow all of them to ring simultaneously. Try unplugging
some of the other phones.
• The layout of your home or office might be limiting the
operating range. Try moving the telephone base to another
location, preferably to a higher location.
• If the other phones in your home are having the same
problem, the problem is in your wiring or local service.
Contact your telephone service provider (charges may apply).
• Test a working phone at the phone jack. If the other phone
has the same problem, the problem is the phone jack. Contact
your telephone service provider (charges may apply).
• Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
• Remove and install the battery again. Wait for the cordless
handset to reestablish its connection with the telephone base.
Allow up to one minute for this to take place.
• Your line cord might be malfunctioning. Try installing a new
line cord.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
My calls cut in and out while I’m using my cordless handset.
• Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
• Do not install this phone near a microwave oven or on
the same electrical outlet. You may experience decreased
performance while the microwave oven is operating.
• If you plug your phone in with a modem or surge protector,
plug the phone (or modem/surge protector) into a different
location. If this doesn’t solve the problem, relocate your
phone or modem farther apart from one another, or use a
different surge protector.
• Relocate your telephone base to a higher location. The phone
may have better reception when installed in a high area.
• If the other phones in your home are having the same
problem, the problem is in your wiring or local service.
Contact your telephone service provider (charges may apply).
• Excessive background noise will cause a speakerphone to fade
in and out. Try controlling the background noise by turning off
any audio devices near the speakerphone. Also, try to avoid
interrupting the person at the other end of the conversation
while they are speaking. If background noise cannot be
controlled, you should stop speakerphone operation and
return to normal handset mode.
• When using a speakerphone, controlling background noise
in your environment is essential. While you are listening to
your party, press the MUTE softkey to temporarily turn your
microphone off. When it is your turn to speak, remember to
press the MUTE softkey to turn the microphone on.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
The charge light is off.
• Make sure the power and line cords are plugged in correctly
and securely.
• Unplug the electrical power. Wait for 15 seconds, then plug it
back in. Allow up to one minute for the cordless handset and
telephone base to reset.
• Clean the cordless handset and charger charging contacts
each month using a pencil eraser or cloth.
My caller ID isn’t working.
• Caller ID is a subscription service. You must subscribe to this
service from your telephone service provider for this feature
to work on your phone.
• The caller must be calling from an area that supports
caller ID.
• Both your and your caller’s telephone service providers must
use caller ID compatible equipment.
• If you subscribe to high-speed Internet service (DSL - digital
subscriber line) through your telephone lines, you must install
a DSL filter between each telephone line cord and telephone
wall jack. The filter prevents noise and caller ID problems
caused by DSL interference. Please contact your DSL service
provider for more information about DSL filters.
My telephone does not receive caller ID when on a call.
• Make sure you subscribe to caller ID with call waiting
features provided by your telephone service provider. Caller
ID features work only if both you and the caller are in areas
offering caller ID service, and if both telephone companies use
compatible equipment.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
I subscribe to a nontraditional telephone service that uses my
computer to establish connections, and my telephone does
not work.
• Make sure your computer is powered on.
• Make sure your Internet connection is working properly.
• Make sure that the software is installed and running for your
nontraditional telephone service.
• Make sure to plug your USB telephone adapter into a
dedicated USB port on your computer. Do not plug into a
multiple port USB hub (USB splitter) that is not powered.
• In a few rare instances, the USB port on your computer may
not have enough power. In these instances, try using a USB
hub with its own external power supply.
• If you are using a firewall, it may prevent access to your
nontraditional telephone service provider. Contact your service
provider for more information.
Common cure for electronic equipment:
If the telephone is not responding normally, try resetting the
telephone. Do the following in the order listed:
1. Disconnect the power to the telephone base.
2. Disconnect the cordless handset battery.
3. Wait a few minutes.
4. Connect power to the telephone base.
5. Install the battery again.
6. Wait for the cordless handset to reestablish its connection
with the telephone base. Allow up to one minute for this to
take place.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Maintenance
Taking care of your telephone
• Your cordless telephone contains sophisticated electronic
parts, so it must be treated with care.
• Avoid rough treatment.
• Place the handset down gently.
• Save the original packing materials to protect your telephone
if you ever need to ship it.
Avoid water
• Your telephone can be damaged if it gets wet. Do not use the
handset in the rain, or handle it with wet hands. Do not install
the telephone base near a sink, bathtub or shower.
Electrical storms
• Electrical storms can sometimes cause power surges harmful
to electronic equipment. For your own safety, take caution
when using electric appliances during storms.
Cleaning your telephone
• Your telephone has a durable plastic casing that should
retain its luster for many years. Clean it only with a soft cloth
slightly dampened with water or a mild soap.
• Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when
you are wet or standing in water. If the telephone base should fall into
water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND
TELEPHONE LINE CORDS FROM THE WALL. Then, pull the telephone out by the
unplugged cords.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Important safety information
This symbol is to alert you to important operating or servicing instructions
that may appear in this user’s manual. Always follow basic safety precautions
when using this product to reduce the risk of injury, fire, or electric shock.
Safety information
•
Read and understand all instructions in the user’s manual. Observe all markings
on the product.
•
•
Avoid using a telephone during a thunderstorm. There might be a slight
chance of electric shock from lightning.
Do not use a telephone in the vicinity of a gas leak. If you suspect a gas leak,
report it immediately, but use a telephone away from the area where gas is
leaking. If this product is a cordless model, make sure the base is also away from
the area.
•
Do not use this product near water, or when you are wet. For example, do
not use it in a wet basement or shower, or next to a swimming pool, bathtub,
kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning.
If the product comes in contact with any liquids, unplug any line or power cord
immediately. Do not plug the product back in until it has dried thoroughly.
•
•
Install this product in a protected location where no one can trip over any
line or power cords. Protect cords from damage or abrasion.
If this product does not operate normally, read the Troubleshooting section
on pages 13-22 of this user’s manual. If you cannot solve the problem, or if the
product is damaged, refer to the Limited warranty section on pages 34-36.
Do not open this product except as may be directed in your user’s manual.
Opening the product or reassembling it incorrectly may expose you to
hazardous voltages or other risks.
•
•
Replace batteries only as described in your user’s manual (pages 6-7). Do not
burn or puncture batteries — they contain caustic chemicals.
This power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling or an under-the-table/cabinet outlet.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Important safety information
CAUTIONS:
• Use only the power adapter provided with this product. To obtain a
replacement, visit our website at www.telephones.att.com or
call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
• Use only the supplied rechargeable battery or replacement battery (model
BT166342/BT266342). To order, visit our website at
In Canada, dial 1 (866) 288-4268.
• To prevent risk of fire or battery explosion, replace with the correct battery
type. Dispose of used batteries according to the instructions.
Especially about cordless telephones
•
Privacy: The same features that make a cordless telephone convenient create
some limitations. Telephone calls are transmitted between the telephone
base and the handset by radio waves, so there is a possibility that your
cordless telephone conversations could be intercepted by radio receiving
equipment within range of the cordless handset. For this reason, you should
not think of cordless telephone conversations as being as private as those on
corded telephones.
•
•
Electrical power: The telephone base of this cordless telephone must be
connected to a working electrical outlet which is not controlled by a wall
switch. Calls cannot be made from the handset if the telephone base is
unplugged, switched off or if the electrical power is interrupted.
Potential TV interference: Some cordless telephones operate at frequencies
that may cause interference to TVs and VCRs. To minimize or prevent such
interference, do not place the telephone base of the cordless telephone
near or on top of a TV or VCR. If interference is experienced, moving the
cordless telephone farther away from the TV or VCR will often reduce or
eliminate the interference.
•
•
Rechargeable batteries: This product contains nickel-metal hydride rechargeable
batteries. Exercise care in handling batteries in order not to create a short
circuit with conductive material such as rings, bracelets, and keys. The battery
or conductor may overheat and cause harm. Observe proper polarity between
the battery and the battery charger.
Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe
manner. Do not burn or puncture. Like other batteries of this type, if burned or
punctured, they could release caustic material which could cause injury.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Important safety information
The RBRC Seal means that the manufacturer is voluntarily
®
participating in an industry program to collect and recycle
nickel-metal hydride rechargeable batteries when taken out
of service within the United States. These batteries may be
taken to a participating local retailer of replacement batteries
or recycling center. Or you may call 1-800-8-BATTERY
locations accepting spent Ni-MH batteries.
®
for
RBRC® and 1-800-8-BATTERY® are registered trademarks of the
Rechargeable Battery Recycling Corporation.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones): Wireless
Technology Research, LLC (WTR), an independent research entity, led a
multidisciplinary evaluation of the interference between portable wireless
telephones and implanted cardiac pacemakers. Supported by the U.S. Food and
Drug Administration, WTR recommends to physicians that:
Pacemaker patients
•
•
Should keep wireless telephones at least six inches from the pacemaker.
Should NOT place wireless telephones directly over the pacemaker, such as in
a breast pocket, when it is turned ON.
•
Should use the wireless telephone at the ear opposite the pacemaker.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from
other persons using wireless telephones.
Especially about telephone answering systems
Two-way recording: This unit does not sound warning beeps to inform the other
party that the call is being recorded. To ensure that you are in compliance
with any federal or state regulations regarding recording a telephone call, you
should start the recording process and then inform the other party that you are
recording the conversation.
SAVE THESE INSTRUCTIONS
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
For C-UL compliance
In compliance with the bilingual requirements for safety, caution, and warning
markings of Canadian Federal and Provincial/Territorial statutes and regulations,
the French version of Important safety information is included.
Mesures de sécurité importantes
Ce symbole vous alertera d’informations importantes ou d’instructions
d’entretien pouvant apparaître dans ce guide d’utilisation. Respectez
toujours les mesures de sécurité et de sécurité de base lorsque vous
utilisez ce produit, afin de réduire les risques de blessures, d’incendie, ou
d’électrocution.
Information relative à la sécurité
• Veuillez lire et comprendre toutes les instructions de ce guide d’utilisation.
Relectez toutes les inscriptions apparaissant sur le produit.
• Évitez d’utiliser le téléphone pendant un orage. Il pourrait y avoir un faible
risque d’électrocution.
• N’utilisez pas un téléphone à proximité d’une fuite de gaz. Si vous soupçonnez
la présence d’une fuite de gaz, rapportez-la immédiatement, mais utilisez un
téléphone situé dans un autre endroit que celui de la fuite de gaz. Si ce produit
est un modèle sans fil, assurez-vous que le socle du téléphone se trouve
également à l’extérieur de cet endroit.
• N’utilisez pas ce produit près de l’eau ou lorsque vous êtes mouillés. Par
exemple, ne l’utilisez pas dans des sous-sols humides ou sous la douche,
ou près d’une piscine, d’un bain, d’un évier de cuisine, ou d’une cuve de
lavage. N’utilisez pas de liquides, ou de vaporisateurs aérosol de nettoyage.
Si le produit entre en contact avec du liquide, débranchez immédiatement le
fil téléphonique ou le cordon d’alimentation. Ne rebranchez pas le produit
avant qu’il soit complètement sec.
• Installez cet appareil dans un endroit protégé où personne ne peut trébucher
sur les cordons d’alimentation ou la ligne téléphonique. Protégez les câbles
contre les dommages ou l’abrasion.
• Si le produit ne fonctionne pas correctement, consultez la section Dépannage
(Troubleshooting) des pages 13-22 de ce guide d’utilisation. Si vous ne
pouvez pas régler le problème, ou si le produit est endommagé, consultez
la section Garantie limitée (Limited warranty) des pages 34-36. N’ouvrez
pas ce produit, sauf tel qu’indiqué dans le guide d’utilisation. L’ouverture
du produit ou le remontage inadéquat pourrait vous exposer à des tensions
dangereuses ou autres dangers.
• Remplacez les piles uniquement tel que décrit dans votre guide d’utilisation
(pages 6-7). N’incinérez pas et ne percez pas les piles — elles contiennent des
produits chimiques caustiques.
• L’adaptateur de courant est conçu pour être orienté verticalement ou installé
sur le plancher. Les broches ne sont pas conçues pour se maintenir en place
si la fiche est branchée dans une prise de courant au plafond, sous la table
ou sous une armoire.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
For C-UL compliance
MISES EN GARDE:
• N’utilisez seulement l’adaptateur inclus avec ce produit. Pour obtenir une pièce
de rechange, visitez notre site Web au www.telephones.att.com
ou composez le 1-800-222-3111. Au Canada, composez le
1-866-288-4268.
• N’utilisez que la pile de rechargeable incluse ou une pile de rechange (modèle
BT166342/BT266342). Pour commander, visitez notre site Web
www.telephones.att.com ou composez le
1-800-222-3111. Au Canada, composez le 1-866-288-4268.
• Afin de prévenir les risques d’incendie ou d’explosion de la pile, replacez la
pile avec une pile du même type. Jetez les piles épuisées en respectant les
instructions.
Spécifiquement en rapport avec les téléphones sans fil
• Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil
si pratiques créent également des restrictions. Les appels téléphoniques sont
transmis entre le socle du téléphone et le combiné par le biais d’ondes radio, et
il se peut que vos conversations téléphoniques soient interceptées par d’autres
équipements de réception d’ondes radio au sein de la portée du téléphone sans
fil. Pour cette raison, vous ne devez pas considérer les conversations sur un
téléphone sans fil comme étant aussi confidentielles que celles d’un téléphone
à cordon.
• Alimentation électrique : La base de ce téléphone sans fil doit être branchée
à une prise de courant électrique fonctionnelle. La prise électrique ne doit
pas être contrôlée par un interrupteur mural. Les appels ne peuvent pas être
effectués à partir du combiné si la base n’est pas branchée, si elle est hors
fonction ou si le courant électrique est coupé.
• Interférences potentielles aux téléviseurs : Certains téléphones sans fil
fonctionnent sur des fréquences pouvant causer des interférences aux
téléviseurs et magnétoscopes. Pour réduire ou prévenir de tels parasites,
ne pas déposer la base du téléphone sans fil à proximité d’un téléviseur ou
magnétoscope, ni directement sur celui-ci. Si votre téléviseur affiche des
interférences, éloignez le téléphone sans fil de celui-ci afin de réduire les
parasites.
• Piles rechargeables : Vous devez recycler ou jeter les piles de manière
écologique. Ne pas jeter dans les rebuts domestiques. Ne pas brûler ni percer
les piles. Comme pour les autres piles du même type, si elles sont brûlées
ou percées, des matières corrosives peuvent s’en échapper, ce qui risque de
causer des brûlures ou autres blessures corporelles.
• Piles rechargeables à l’hydrure métallique de nickel : Jetez ces piles de
manière sécuritaire. N’incinérez pas et ne peercez pas les piles. Comme pour
les autres piles du même type, si elles sont brûlées ou percées, des matières
corrosives peuvent s’en échapper, ce qui risque de causer des brûlures ou
autres blessures corporelles.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
For C-UL compliance
Le sceau de l’organisme de recyclage RBRCMD sur les piles à
l’hydrure métallique de nickel signifie que le fabricant de cet
appareil participe volontairement au programme industriel visant
à reprendre et recycler ce type de piles lorsqu’elles ne servent
plus, au sein du territoire des États-Unis et du Canada. Vous devez
apporter ces piles chez un détaillant participant ou le centre de
recyclage le plus près de chez vous. Ou vous pouvez composer le
1-800-8-BATTERYMD afin de connaître les endroits qui acceptent les
piles à l’hydrure métallique de nickel mortes.
RBRCMD et 1-800-8-BATTERYMD sont des marques déposées de
Rechargeable Battery Recycling Corporation.
Mesures préventives pour les utilisateurs de stimulateurs cardiaques
implantés dans l’organisme
Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) :
L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche
indépendante, a mené une évaluation pluridisciplinaire des interférences entre
les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans
l’organisme. Appuyée par l’Administration des aliments et drogues (FDA) des États-
unis, la firme WTR recommande aux médecins :
Avis aux détenteurs de stimulateurs cardiaques
•
•
•
Ils doivent tenir le téléphone sans fil à une distance d’au moins six pouces du
stimulateur cardiaque.
Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur
cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en fonction.
Ils doivent utiliser le téléphone sans fil en l’appuyant sur l’oreille qui se trouve
dans la direction opposée au stimulateur cardiaque.
L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les
détenteurs de simulateurs cardiaques causé par les gens qui utilisent un
téléphone sans fil à proximité de ceux-ci.
Spécifiquement en rapport avec les répondeurs téléphoniques
Enregistrement deux voies : Cet appareil n’émet pas de bips d’avertissement qui
permettent de prévenir l’autre partie que vous enregistrez la conversation. Pour
assurer votre conformité aux règlements fédéraux ou provinciaux en rapport avec
les enregistrements des conversations téléphoniques, vous devriez informer l’autre
partie lorsque vous activez l’enregistrement.
CONSERVEZ CES INSTRUCTIONS
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical
requirements adopted by the Administrative Council for Terminal Attachments
(ACTA). The label on the back or bottom of this equipment contains, among other
things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must
be provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the
telephone network must comply with the applicable Part 68 rules and technical
requirements adopted by ACTA. A compliant telephone cord and modular plug
is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. An RJ11 jack should normally be used
for connecting to a single line and an RJ14 jack for two lines. See Installation
Instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices
you may connect to your telephone line and still have them ring when you
are called. The REN for this product is encoded as the 6th and 7th characters
following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In
most, but not all areas, the sum of all RENs should be five (5.0) or less. For more
information, please contact your telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired
alarm dialing equipment connected to your telephone line, ensure the connection
of this equipment does not disable your alarm equipment. If you have questions
about what will disable the alarm equipment, consult your telephone service
provider or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular
jack until the problem has been corrected. Repairs to this telephone equipment
can only be made by the manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined under the Limited Warranty.
If this equipment is causing harm to the telephone network, the telephone
service provider may temporarily discontinue your telephone service. The
telephone service provider is required to notify you before interrupting service.
If advance notice is not practical, you will be notified as soon as possible. You
will be given the opportunity to correct the problem and the telephone service
provider is required to inform you of your right to file a complaint with the FCC.
Your telephone service provider may make changes in its facilities, equipment,
operation, or procedures that could affect the proper functioning of this product.
The telephone service provider is required to notify you if such changes
are planned.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
FCC Part 68 and ACTA
If this product is equipped with a corded or cordless handset, it is hearing aid
compatible.
If this product has memory dialing locations, you may choose to store emergency
telephone numbers (e.g., police, fire, medical) in these locations. If you do store
or test emergency numbers, please:
•
Remain on the line and briefly explain the reason for the call before
hanging up.
•
Perform such activities in off-peak hours, such as early morning or
late evening.
Industry Canada
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference,
including interference that may cause undesired operation.
The term ‘’IC:‘’ before the certification/registration number only signifies that the
Industry Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The
REN is an indication of the maximum number of devices allowed to be connected
to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs
of all the devices does not exceed five.
This product meets the applicable Industry Canada technical specifications.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
FCC Part 15
This equipment has been tested and found to comply with the requirements for a
Class B digital device under Part 15 of the Federal Communications Commission
(FCC) rules.
These requirements are intended to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. Privacy of communications may not be ensured
when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of
radio frequency energy that can be safely absorbed by a user or bystander
according to the intended usage of the product. This product has been tested
and found to comply with the FCC criteria. The handset may be safely held
against the ear of the user. The telephone base shall be installed and used such
that parts of the user’s body other than the hands are maintained at a distance
of approximately 20cm (8 inches) or more. If you choose to use a clipping device,
please make sure to only use the supplied AT&T belt clip.
This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
For body worn operation, this handset has been tested and meets FCC RF
exposure guidelines when used with an accessory that contains no metal and
that positions the handset a minimum of (0mm) from the body.
Use of other accessories may not ensure compliance with FCC RF exposure
guidelines.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
California Energy Commission battery charging
testing instructions
This telephone is set up to comply with the energy-conserving standards right out
of the box. These instructions are intended for California Energy Commission (CEC)
compliance testing only. When the CEC battery charging testing mode is activated, all
telephone functions on the cordless handsets, except battery charging, will be disabled.
When first purchased and properly installed for charging (see Battery installation and
charging on pages 6-7), put the handset in the handset charger to charge. The CEC
battery charging testing mode is activated while charging.
If you have registered the handset to the TL86109 base, below are the testing
instructions.
To activate the CEC battery charging testing mode:
1. When the phone is not in use, press and hold FLASH on the telephone base for
about 4 seconds until it shows Deregister all handsets? Then, release the button.
2. Press the YES softkey to continue. You hear a confirmation tone from the
telephone base.
3. The telephone base displays PLEASE WAIT... All system handsets show Out of
range OR no power at base for a few seconds, and then you hear a confirmation
tone from the handset.
When the phone successfully enters the CEC battery charging testing mode, all
handsets show Press [HOLD] on base for 4 sec, then press [#] on handset.
When the phone fails to enter this mode, repeat all the steps mentioned
above.
To deactivate the CEC battery charging testing mode:
1. Unplug the telephone base power adapter from the power outlet, then plug it back
in. The telephone base is powered up as normal.
2. Register your handsets back to the telephone base. See page 11 for handset
registration instructions.
BC
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Limited warranty
The AT&T brand is used under license - any repair, replacement or warranty
service, and all questions about this product should be directed to: In the United
States of America, call 1 (800) 222-3111 or visit
www.telephones.att.com; in Canada, call
1 (866) 288-4268.
1. What does this limited warranty cover?
The manufacturer of this AT&T-branded product warrants to the holder of
a valid proof of purchase (“CONSUMER” or “you”) that the product and all
accessories provided in the sales package (“PRODUCT”) are free from defects
in material and workmanship, pursuant to the following terms and conditions,
when installed and used normally and in accordance with the PRODUCT
operating instructions. This limited warranty extends only to the CONSUMER
for products purchased and used in the United States of America and Canada.
2. What will be done if the PRODUCT is not free from defects in materials
and workmanship during the limited warranty period (“materially
defective PRODUCT”)?
During the limited warranty period, the manufacturer’s authorized service
representative repairs or replaces at the manufacturer’s option, without
charge, a materially defective PRODUCT. If the manufacturer repairs the
PRODUCT, they may use new or refurbished replacement parts. If the
manufacturer chooses to replace the PRODUCT, they may replace it with a
new or refurbished PRODUCT of the same or similar design. The manufacturer
retains the defective parts, modules, or equipment. Repair or replacement
of the PRODUCT, at the manufacturer’s option, is your exclusive remedy. The
manufacturer returns the repaired or replacement products to you in working
condition. You should expect the repair or replacement to take approximately
30 days.
3. How long is the limited warranty period?
The limited warranty period for the PRODUCT extends for ONE (1) YEAR from
the date of purchase. If the manufacturer repairs or replaces a materially
defective PRODUCT under the terms of this limited warranty, this limited
warranty also applies to repaired or replacement PRODUCT for a period of
either (a) 90 days from the date the repaired or replacement PRODUCT is
shipped to you or (b) the time remaining on the original one-year limited
warranty; whichever is longer.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Limited warranty
4. What is not covered by this limited warranty?
This limited warranty does not cover:
•
•
PRODUCT that has been subjected to misuse, accident, shipping or other
physical damage, improper installation, abnormal operation or handling,
neglect, inundation, fire, water, or other liquid intrusion; or
PRODUCT that has been damaged due to repair, alteration, or modification
by anyone other than an authorized service representative of the
manufacturer; or
•
•
•
PRODUCT to the extent that the problem experienced is caused by signal
conditions, network reliability or cable or antenna systems; or
PRODUCT to the extent that the problem is caused by use with non-AT&T
accessories; or
PRODUCT whose warranty/quality stickers, PRODUCT serial number plates
or electronic serial numbers have been removed, altered or rendered
illegible; or
•
PRODUCT purchased, used, serviced, or shipped for repair from outside
the United States of America or Canada, or used for commercial or
institutional purposes (including but not limited to products used for rental
purposes); or
•
•
PRODUCT returned without a valid proof of purchase (see item 6);
or
Charges for installation or setup, adjustment of customer controls, and
installation or repair of systems outside the unit.
5. How do you get warranty service?
To obtain warranty service in the United States of America, visit
in Canada, please dial 1 (866) 288-4268. NOTE: Before calling for
service, please review the user’s manual. A check of the PRODUCT’s controls
and features might save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage
during transit and transportation and are responsible for delivery or handling
charges incurred in the transport of the PRODUCT(s) to the service location.
The manufacturer will return repaired or replaced PRODUCT under this
limited warranty. Transportation, delivery or handling charges are prepaid. The
manufacturer assumes no risk for damage or loss of the PRODUCT in transit.
If the PRODUCT failure is not covered by this limited warranty, or proof of
purchase does not meet the terms of this limited warranty, the manufacturer
notifies you and requests that you authorize the cost of repair prior to any
further repair activity. You must pay for the cost of repair and return shipping
costs for the repair of products that are not covered by this limited warranty.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Limited warranty
6. What must you return with the PRODUCT to get warranty service?
You must:
a. Return the entire original package and contents including the PRODUCT
to the service location along with a description of the malfunction or
difficulty; and
b. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT
purchased (PRODUCT model) and the date of purchase or receipt; and
c. Provide your name, complete and correct mailing address, and telephone
number.
7. Other limitations
This warranty is the complete and exclusive agreement between you and the
manufacturer of this AT&T branded PRODUCT. It supersedes all other written
or oral communications related to this PRODUCT. The manufacturer provides
no other warranties for this PRODUCT. The warranty exclusively describes all
of the manufacturer’s responsibilities regarding the PRODUCT. There are no
other express warranties. No one is authorized to make modifications to this
limited warranty and you should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you specific legal rights, and
you might also have other rights that vary from state to state or province to
province.
Limitations: Implied warranties, including those of fitness for a particular
purpose and merchantability (an unwritten warranty that the PRODUCT is
fit for ordinary use) are limited to one year from date of purchase. Some
states/provinces do not allow limitations on how long an implied warranty
lasts, so the above limitation might not apply to you. In no event shall the
manufacturer be liable for any indirect, special, incidental, consequential,
or similar damages (including, but not limited to lost profits or revenue,
inability to use the PRODUCT or other associated equipment, the cost of
substitute equipment, and claims by third parties) resulting from the use of
this PRODUCT. Some states/provinces do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion
might not apply to you.
Please retain your original sales receipt as proof
of purchase.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Technical specifications
RF frequency band
1921.536MHz — 1928.448MHz
Channels
5
Operating temperature
Handset voltage
32°F — 122°F
0°C — 50°C
2.4 — 3.2 VDC
6VDC @ 400mA
2.4V 750mAH
Charger voltage
(DC adapter output)
Replacement battery
Operating times*
Talk time (handset): up to seven hours
Talk time (speakerphone): up to five hours
Standby: up to seven days
* Operating times vary depending on your actual use and the age of the battery.
DECT 6.0 digital technology
The AT&T DECT 6.0 products offer unsurpassed range
performance and sound clarity. This is achieved through a unique
antenna design and advances in noise-filtering technology.
An independent laboratory has confirmed that AT&T DECT 6.0
products perform up to 45% better in range competitions. Now,
calls can be taken in the basement, backyard and garage with
exceptional sound quality.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Technical specifications
Telephone operating range
This cordless telephone operates within the maximum power
allowed by the Federal Communications Commission (FCC). Even
so, this handset and telephone base can communicate over
a certain distance — which can vary with the locations of the
telephone base and handset, the weather, and the construction
of your home or office.
Extended range and clarity
This telephone base comes with an antenna which gives much
better clarity and covers a longer range than before.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by
Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited
is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
© 2010-2014 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
RBRC® and 1-800-8-BATTERY® are registered trademarks of the Rechargeable Battery Recycling Corporation.
Printed in China. Issue 6.1 AT&T 10/14.
Download from Www.Somanuals.com. All Manuals Search And Download.
|