Go to www.vtechphones.com
to register your product for
enhanced warranty support and
latest VTech product news.
CS6719
CS6719-15
CS6719-16
CS6719-2
DECT 6.0 cordless telephone
BC
User’s manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Never push objects of any kind into
this product through the slots in the
telephone base or handset because
they may touch dangerous voltage
points or create a short circuit. Never
spill liquid of any kind on the product.
10.To reduce the risk of electric shock,
do not disassemble this product,
but take it to an authorized service
facility. Opening or removing parts of
the telephone base or handset other
than specified access doors may
expose you to dangerous voltages or
other risks. Incorrect reassembling
can cause electric shock when the
product is subsequently used.
11.Do not overload wall outlets and
extension cords.
There is a remote risk of electric
shock from lightning.
14.Do not use the telephone to report
a gas leak in the vicinity of the
leak. Under certain circumstances,
a spark may be created when the
adapter is plugged into the power
outlet, or when the handset is
replaced in its cradle. This is a
common event associated with the
closing of any electrical circuit. The
user should not plug the phone
into a power outlet, and should
not put a charged handset into
the cradle, if the phone is located
in an environment containing
concentrations of flammable or
flame-supporting gases, unless there
is adequate ventilation. A spark in
such an environment could create a
fire or explosion. Such environments
might include: medical use of
oxygen without adequate ventilation;
industrial gases (cleaning solvents;
gasoline vapors; etc.); a leak of
natural gas; etc.
12.Unplug this product from the wall
outlet and refer servicing to an
authorized service facility under the
following conditions:
• When the power supply cord or
plug is damaged or frayed.
• If liquid has been spilled onto the
product.
• If the product has been exposed
to rain or water.
• If the product does not operate
normally by following the
15.Only put the handset of your
telephone next to your ear when it is
in normal talk mode.
16.The power adapters are intended to
be correctly oriented in a vertical or
floor mount position. The prongs are
not designed to hold the plug in place
if it is plugged into a ceiling,
operating instructions. Adjust only
those controls that are covered
by the operation instructions.
Improper adjustment of other
under-the-table or cabinet outlet.
controls may result in damage and
often requires extensive work by
an authorized technician to restore
the product to normal operation.
• If the product has been dropped
and the telephone base and/or
handset has been damaged.
SAVE THESE INSTRUCTIONS
Battery
• CAUTION: Use Only Supplied
Battery.
• Do not dispose of the battery in a fire.
Check with local waste management
codes for special disposal instructions.
• Do not open or mutilate the battery.
Released electrolyte is corrosive and
• If the product exhibits a distinct
change in performance.
13.Avoid using a telephone (other than
cordless) during an electrical storm.
Download from Www.Somanuals.com. All Manuals Search And Download.
may cause burns or injury to the eyes
or skin. The electrolyte may be toxic if
swallowed.
by radio receiving equipment within
range of the cordless handset. For
this reason, you should not think of
cordless telephone conversations as
being as private as those on corded
telephones.
• Exercise care in handling batteries in
order not to create a short circuit with
conductive materials.
• Charge the battery provided with this
product only in accordance with the
instructions and limitations specified
in this manual.
• Electrical power: The telephone
base of this cordless telephone must
be connected to a working electrical
outlet. The electrical outlet should not
be controlled by a wall switch. Calls
cannot be made from the cordless
handset if the telephone base is
unplugged, switched off or if the
electrical power is interrupted.
• Potential TV interference: Some
cordless telephones operate
Precautions for users of
implanted cardiac pacemakers
Cardiac pacemakers (applies only to
digital cordless telephones):
Wireless Technology Research, LLC
(WTR), an independent research entity,
led a multidisciplinary evaluation of the
interference between portable wireless
telephones and implanted cardiac
pacemakers. Supported by the U.S.
Food and Drug Administration, WTR
recommends to physicians that:
at frequencies that may cause
interference to televisions and
VCRs. To minimize or prevent
such interference, do not place
the telephone base of the cordless
telephone near or on top of a TV or
VCR. If interference is experienced,
moving the cordless telephone farther
away from the TV or VCR often
reduces or eliminates the interference.
• Rechargeable batteries: Exercise
care in handling batteries in order
not to create a short circuit with
conducting material such as rings,
bracelets and keys. The battery or
conductor may overheat and cause
harm. Observe proper polarity
between the battery and the battery
charger.
Pacemaker patients
• Should keep wireless telephones at
least six inches from the pacemaker.
• Should NOT place wireless telephones
directly over the pacemaker, such as in
a breast pocket, when it is turned ON.
• Should use the wireless telephone at
the ear opposite the pacemaker.
WTR’s evaluation did not identify any
risk to bystanders with pacemakers
from other persons using wireless
telephones.
• Nickel-metal hydride rechargeable
batteries: Dispose of these batteries
in a safe manner. Do not burn or
puncture the battery. Like other
batteries of this type, if burned or
punctured, they could release caustic
material which could cause injury.
About cordless telephones
• Privacy: The same features that make
a cordless telephone convenient
create some limitations. Telephone
calls are transmitted between the
telephone base and the cordless
handset by radio waves, so there is a
possibility that the cordless telephone
conversations could be intercepted
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in the box
Your telephone package contains the
following items. Save your sales receipt
and original packaging in case it is
necessary to ship your telephone for
warranty service.
1 set for CS6719-2
NOTE
• To purchase replacement batteries or
power adapters, visit our website at
www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial
1 (800) 267-7377.
Important Safety
Instructions
Abridged user’s
manual
1 set for CS6719/CS6719-2/CS6719-3
1 set for CS6719/CS6719-15/
CS6719-16/CS6719-2
1 set for CS6719/CS6719-15/CS6719-16;
2 sets for CS6719-2;
Download from Www.Somanuals.com. All Manuals Search And Download.
1
5 –
Overview
• Press repeatedly to show other
dialing options when reviewing a
caller ID log entry.
Handset overview
6 – INT
• Press to start an intercom
a
b
p
conversation or transfer a call (for
multi-handset models only).
7 – Microphone
8 –
o
n
m
• Make or answer a call using the
handset speakerphone.
• During a call, press to switch
between the speakerphone and
the handset.
c
d
l
9 – MUTE/DELETE
k
j
• Mute the microphone during a
call.
• Delete digits or characters while
using the dialing keys.
• Silence the ringer temporarily
while the handset is ringing.
e
f
i
h
g
10 –
1 – Handset earpiece
2 – LCD display
• While you have set the dial mode
to pulse and on a call, press to
switch to tone dialing temporarily.
3 – MENU/SELECT
11 –
• Show the menu.
• Press to add a space when
entering names.
• While in a menu, press to select
an item, or save an entry or
setting.
12 – 1
• Press repeatedly to add or
remove 1 in front of the caller ID
log entry before dialing or saving
it to the directory.
• Press and hold to set or dial your
voicemail number.
4 – OFF/CANCEL
• Hang up a call.
• Silence the ringer temporarily
while the handset is ringing.
•
Press and hold to erase the
missed call indicator while the
phone is not in use.
/FLASH
13 –
• Press to return to the previous
menu; or press and hold to return
to idle mode, without making
changes.
• Make or answer a home call.
• Answer an incoming home call
when you hear a call waiting
alert.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
14 – REDIAL/PAUSE
Telephone base overview
• Press repeatedly to review the
redial list.
• Press and hold to insert a dialing
pause while entering a number.
d
15 – VOLUME/ /
• Review the directory when the
phone is not in use.
• Increase the listening volume
during a call.
• Scroll up while in a menu, or in
the directory, caller ID log, or
redial list.
a
b
c
• Move the cursor to the right when
entering numbers or names.
1 – IN USE light
VOLUME/ /CID
• Review the caller ID log when the
phone is not in use.
• Decrease the listening volume
during a call.
• Flashes when there is an incoming
call, or another telephone sharing
the same line is in use.
• On when the handset is in use.
• Scroll down while in a menu, or
in the directory, caller ID log, or
redial list.
• Move the cursor to the left when
entering numbers or names.
2 – /FIND HANDSET
• Press to page all system
handsets.
3 – Charging pole
4 – Charge light
16 – CHARGE light
• On when the handset is
charging.
Charger overview
a
1 – Charging pole
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Display icons overview
Handset and Telephone base
lights overview
The battery icon flashes
Handset lights
when the battery is low
and needs charging.
On when the handset
speakerphone is in
use.
The battery icon animates
when the battery is
charging.
CHARGE
On when the handset
is charging in the
telephone base or
handset charger.
The battery icon becomes
solid when the battery is
fully charged.
The handset ringer is off.
Telephone base lights
IN USE
On when the telephone
line is in use.
There are new voicemail
received from your
telephone service
provider.
On when you are
registering a handset.
Flashes quickly when
there is an incoming
call.
ECO
NEW
The ECO mode activates
automatically to reduce
power consumption when
the handset is within
range from the telephone
base.
Flashes when another
telephone sharing the
same line is in use.
Flashes when you
are deregistering all
handsets.
There are new caller ID
log entries.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Mount the telephone base
Connect
The telephone comes ready for tabletop
use. If you have already installed the
telephone for tabletop use, unplug the
telephone line cord from the telephone
wall jack, and unplug the telephone base
power adapter from the wall outlet before
mounting your telephone on a wall.
Follow the steps below to mount your
telephone on a wall.
You can choose to connect the telephone
base for desktop usage or wall mounting.
NOTES
• Use only the power adapters supplied with
this product.
• Make sure the electrical outlets are not
controlled by wall switches.
• The adapters are intended to be correctly
oriented in a vertical or floor mount
position. The prongs are not designed to
hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
1. Route the telephone line cord
through the rectangular hole on the
wall mount bracket. Then plug the
two ends of the telephone line cord
into the telephone base and the wall
outlet as shown.
TIP
• If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall
jack. Contact your DSL service provider
for more information.
Connect the telephone base
2 Align the holes on the bracket with
the standard wall plate and slide the
bracket down until it clicks securely in
place.
Connect the charger
A
Download from Www.Somanuals.com. All Manuals Search And Download.
5
3. Align the grooves on the telephone
base with the tabs on the wall mount
bracket, and then slide it down until it
clicks securely in place.
Install and charge the battery
Install the battery as shown below.
NOTES
• Use only supplied battery.
• If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.
4. Connect the power adapter to the
telephone base and an electrical
outlet not controlled by a wall switch.
THIS SIDE UP
THIS SIDE UP
Download from Www.Somanuals.com. All Manuals Search And Download.
6
When it is fully charged, you can expect
the following performance:
Charge the battery
Place the handset in the telephone base
or the charger to charge.
Operation
Operating time
While in handset
use (talking*)
Seven hours
While in
speakerphone
mode (talking*)
Three hours
Five days
While not in use
(standby**)
* Operating times vary depending on your actual
use and the age of the battery.
** Handset is not charging or in use.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table below).
NOTES
• For best performance, keep the handset in
the telephone base or charger when not
in use.
• The battery is fully charged after 12 hours
of continuous charging.
• If you place the handset in the telephone
base or the charger without plugging
in the battery, the screen displays
No battery.
Battery
indicators
Battery
status
Action
The screen
is blank, or
shows Put
in charger
and
The battery
has no
Charge
without
charge or
very little
charge. The
handset
interruption
(at least 30
minutes).
flashes.
cannot be
used.
The screen
The battery
has enough
Charge
shows Low
without
battery and charge to be
flashes.
interruption
(at least 30
minutes).
used for a
short time.
The screen
shows
HANDSET X.
The battery is To keep
charged.
the battery
charged,
place it in the
telephone
base or
charger when
not in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Operating range
Before use
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, this handset and
telephone base can communicate over
only a certain distance - which can
vary with the locations of the telephone
base and handset, the weather, and the
layout of your home or office.
After you install your telephone or
power returns following a power outage,
the handset will prompt you to set the
date and time.
Set date and time
1. Use the dialing keys (0-9) to enter
the month (MM), date (DD) and year
(YY). Then press SELECT.
When the handset is out of range, the
handset displays Out of range or no pwr
at base.
2. Use the dialing keys (0-9) to enter the
hour (HH) and minute (MM). Then
press or to choose AM or PM.
If there is a call while the handset is
out of range, it may not ring, or if it
does ring, the call may not connect well
when you press . Move closer to the
telephone base, and then press
to answer the call. If the handset
moves out of range during a telephone
conversation, there may be interference.
To improve reception, move closer to the
telephone base.
3. Press SELECT to save.
Check for dial tone
Press . If you hear a dial tone, the
installation is successful.
If you do not hear a dial tone:
• Make sure the installation procedures
described above are properly done.
• It may be a wiring problem. If you
have changed your telephone
service to digital service from a
cable company or a VoIP service
provider, the telephone line may need
to be rewired to allow all existing
telephone jacks to work. Contact your
cable/VoIP service provider for more
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Set date and time
1. Press MENU when the handset is not
Configure your telephone
Using the handset menu
in use.
1. Press MENU when the phone is not
2. Press or to highlight Set date/time,
in use.
and then press SELECT.
2. Press or until the screen displays
the desired feature menu.
3. Use the dialing keys (0-9) to enter
the month (MM), date (DD) and year
(YY). Then press SELECT.
3. Press SELECT to enter that menu.
4. Use the dialing keys (0-9) to enter the
hour (HH) and minute (MM). Then
press or to choose AM or PM.
• To return to the previous menu, press
CANCEL on the handset.
• To return to idle mode, press and hold
5. Press SELECT to save.
CANCEL on the handset.
Set language
The LCD language is preset to English.
You can select English, French or
Spanish to be used in all screen displays.
1. Press MENU when the handset is not
in use.
2. Press or to highlight Settings,
and then press SELECT.
3. Press SELECT to select
LCD language.
4. Press or to highlight English,
Français or Español, and then press
SELECT.
• The screen displays Set English?
when you choose English.
• The screen displays Set Français?
when you choose Français.
• The screen displays Set Español?
when you choose Español.
5. Press SELECT to save your
selection. You hear a confirmation
tone
NOTE
• If you accidentally changed the LCD
language to French or Spanish, you can
reset it to English
easily by pressing
MENU and then entering 364
.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Home area code
Dial mode
If you dial your local calls using only
seven digits (area code not required),
you can program your home area code
so that when you receive a call within
your local area, the telephone number
is automatically stored without the area
code in the caller ID log.
The dial mode is preset to touch-tone
dialing. If you have pulse (rotary)
service, you must change the dial
mode to pulse dialing before using the
telephone to make a call.
1. Press MENU when the phone is not
in use.
1. Press MENU when the phone is not
2. Press or to highlight Settings,
in use.
and then press SELECT.
2. Press or to highlight Settings,
3. Press or to highlight Dial mode,
and then press SELECT.
and then press SELECT.
3. Press or to highlight Home area
4. Press or to choose Touch-tone
code, and then press SELECT.
or Pulse.
4. Use the dialing keys to enter a
three-digit home area code.
5. Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
5. Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
Temporary tone dialing
NOTE
If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This
is useful if you need to send touch-
tone signals to access your telephone
banking or long distance services.
• If, in the future, your telephone service
provider requires you to dial the area code
when making a local call, or, if you move to
a location that requires it, delete the home
area code you have already programmed,
following the steps above. After you have
deleted the home area code, _ _ _ will
appear on the display.
1. During a call, press
.
2. Use the dialing keys to enter the
number you wish to dial.
3. The telephone sends touch-tone
signals. The telephone automatically
returns to pulse dialing mode after
you end the call.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Make a call
Telephone Operations
1. Press
or on the handset.
2. When you hear a dial tone, dial the
number.
Handset control key panel:
• The handset displays Unable to
call if the telephone line is in use.
NOTES
•
•
The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
While entering numbers, press and hold
PAUSE to insert a dialing pause
(a p appears).
Predial a call
1. Enter the telephone number.
2. Press
or to dial.
NOTES
•
•
•
The handset displays Unable to call if
the telephone line is in use.
The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
While entering numbers, press DELETE
or CANCEL to make corrections;
press and hold PAUSE to insert a dialing
pause (a p appears).
Answer a call
Press
, or
,
, or any dialing key (0-9,
) to answer.
End a call
Press OFF on the handset, or place the
handset in the telephone base or
handset charger.
Speakerphone
When the handset is on a call, press
to switch between the speakerphone
and the handset earpiece. When the
speakerphone is active, the handset
displays Speaker.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
charger to exit the call. The call
continues on the other handset until
both handsets hang up.
Volume control
During a call, press /VOLUME/ .
If this is a cell call and the volume is too
loud or quiet, try changing the volume
on your cell phone. On some cell
phones, changing the volume on the
cell phone affects your cell call volume
on the CS6719 handset.
NOTE
If you have paired a DECT 6.0 cordless
headset and speakerphone to the telephone
base, you can also join a call in progress
using the paired device. Refer to the user’s
manuals of the respective product for more
information.
NOTES
•
•
The handset and speakerphone volume
settings are independent.
Call waiting
When the volume reaches the minimum
or maximum setting, you hear two beeps.
When you subscribe to call waiting
service with your telephone service
provider, the handset flashes and you
hear a beep if someone calls while you
are already on a call.
Mute
The mute function allows you to hear
the other party but the
other party cannot hear you.
• Press FLASH on the handset to put
your current call on hold and take the
new call.
• Press FLASH on the handset at any
time to switch back and forth
between calls.
• During a call, press MUTE. The
handset displays Muted until the
mute function is turned off.
• Press MUTE again to resume the
conversation. The handset briefly
displays Microphone on.
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
directory, caller ID log or redial list while
you are on a call.
Join a call in progress (for
multiple handset models only)
Another handset can join you on a
home call. That call continues until
all parties hang up. You can share an
outside call with up to two handsets at
the same time.
You can buy additional expansion
handsets (CS6709) for this telephone
base. You can register up to five devices
to the telephone base.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes)
from the directory, caller ID log or
redial list.
To access a number from the
directory while on a call:
1. Press MENU.
To join a call:
2. Press SELECT to select Directory.
• When a handset is already on a call,
3. Press or to scroll to the desired
entry.
press
or on another handset to
join the call.
4. Press SELECT to dial the displayed
• Press OFF or place the handset
in the telephone base or handset
number.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
To access a number from the
caller ID log while on a call:
1. Press MENU.
Transfer a call
While on an outside call, you can
transfer the call from one handset to
another.
2. Press or to highlight Caller ID
log, and then press SELECT.
1. During a call, press MENU.
3. Press or to scroll to the desired
entry.
2. Press or to scroll to Transfer,
then press SELECT.
4. Press SELECT to dial the displayed
• If you have two handsets, your
handset displays Calling HS X and
then Transferred.
number.
To access a number from the
redial list while on a call:
1. Press REDIAL to enter the redial list.
• If you have three or more
handsets, your handset
displays Transfer to: Use the
dialing keys to select a destination
handset.Your handset displays
Calling HS X
2. Press
,
, or REDIAL repeatedly to
browse to the desired entry.
3. Press SELECT to dial the displayed
number.
and then Transferred.
The destination handset rings and its
screen displays Incoming call.
Find handset
This feature helps you find misplaced
handsets.
3. To answer on the destination handset,
press
,
, or any dialing key
(0-9,
handset.
, or ) on the destination
To start the paging tone:
• Press /FIND HANDSET on the
telephone base.
NOTES
All idle handsets ring and their
screens display ** Paging **.
•
•
If the destination handset does not answer
the call within 30 seconds, the call will
be reverted to the originating handset. If
To stop the paging tone:
• Press , OFF, or any dialing key
you do not press
,
, or any dialing
key (0-9,
, or
) on your handset
to reconnect the outside call within 30
seconds, the call ends automatically.
(0-9,
, or
) on a handset.
If the destination handset is in the directory
or caller ID log, or is out of range, the
originating handset displays Unable to
call and then reconnects to the outside
call.
Intercom
Use the intercom feature for
conversations between two handsets.
You can buy additional expansion
handsets (CS6709) for this telephone
base.You can register up to five
handsets to the telephone base.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
1. Press INT on your handset when not
Answer an incoming call during
an intercom call
When you receive an outside call during
an intercom call, there is an alert tone.
in use.
• If you have only one handset, your
handset displays INT needs 2 HS.
• If you have two handsets, your
• To answer the outside call, press
.
handset displays Calling HS X.
The intercom call ends automatically.
• If you have three or more
• To end the intercom call without
answering the outside call, press
OFF. The telephone continues to
ring.
handsets, your handset displays
Intercom to. Use the dialing keys
to enter a destination handset.Your
handset displays Calling HS X.
The destination handset rings and its
screen displays HS X is calling.
Call transfer using intercom
Use the intercom feature to transfer an
outside call to another system handset.
2. To answer the intercom call, press
,
, INT or any dialing key (0-9,
1. During a call, press INT.
, or
) on the destination handset.
Both handsets now display Intercom.
• If you have two handsets, the
outside call is put on hold and your
handset displays Calling HS X.
3. To end the intercom call, press OFF
or place the handset back in the
telephone base or charger. Both
handsets now display Intercom
ended.
• If you have three or more
handsets, your handset displays
Intercom to. Use the dialing keys
to enter a handset number. The
outside call is put on hold and your
handset displays Calling HS X.
NOTES
•
•
You can cancel the intercom call before it is
answered by pressing OFF or INT on the
originating handset.
The destination handset rings and its
screen displays HS X is calling.
If the destination handset does not answer
the intercom call within 100 seconds, is on
a call or out of range, the originating
handset displays Unable to call and
returns to idle mode.
2. To answer the intercom call on the
destination handset, press
,
, INT
or any dialing key (0-9,
, or
).
The outside call is still on hold and both
handsets now display Intercom. You
can now have a private conversation
with the destination handset.
•
•
Press OFF or MUTE on the destination
handset to temporarily silence the intercom
ringer.
You can use four handsets on two pairs
of intercom calls. For example, when four
handsets are used on two pairs of intercom
calls, use the fifth handset for an outside call.
NOTES
• To cancel the intercom call before it is
answered, press OFF, or INT on your
handset.
•
If there is an incoming call while the
originating handset displays Calling HS X,
the intercom request will be stopped and
the screen displays Incoming call.
• If the destination handset does not
answer within 100 seconds, is in use, on
a call or is out of range, the originating
handset displays Unable to call and then
reconnects to the outside call.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
3. From this intercom call, you have the
following options:
Redial list
Each handset stores the last 10
telephone numbers dialed (up to 30
digits). When there are already 10
entries, the oldest entry is deleted to
make room for the new entry.
• You can let the destination handset
join you on the outside call in
a three-way conversation.
Press and hold INT on the
originating handset.
• You can transfer the call. Press
OFF, or place your handset back in
the telephone base or charger.Your
handset displays Transferred.
The destination handset is then
connected to the outside call.
Review a redial list entry
1. Press REDIAL to enter the redial list.
2. Press
,
, or REDIAL repeatedly
to browse until the desired entry
displays.
• You can press INT to switch
between the outside call (Outside
call displays) and the intercom call
(Intercom displays).
Dial a redial list entry
1. Press REDIAL to enter the redial list.
2. Press
,
, or REDIAL repeatedly
to browse until the desired entry
displays.
• The destination handset can end
the intercom call by pressing OFF,
or by placing the handset back
in the telephone base or charger.
The outside call continues with the
original system handset.
3. Press
or to dial.
-OR-
1. Press
or to take the line.
2. Press REDIAL to enter the redial list.
3. Press , or REDIAL repeatedly
,
to browse until the desired entry
displays.
4. Press SELECT to dial the displayed
number.
Delete a redial list entry
1. Press REDIAL to enter the redial list.
2. Press
,
, or REDIAL repeatedly
to browse until the desired entry
displays.
• When the handset displays the number
you want to delete, press DELETE.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
6. When Enter name displays, use
the dialing keys to enter a name (up
to 15 characters). Each time you
press a key, the character on that
key appears. Additional key presses
produce other characters on that key.
Press the key repeatedly until the
desired character appears. The first
character of every word is capitalized.
Directory
The directory can store up to 50 entries,
which are shared by all handsets.
Each entry may consist of a telephone
number up to 30 digits, and a name up
to 15 characters.
Each handset directory is independent
(for multiple handset models only). Any
additions, deletions or edits made on
one handset are not reflected on other
handsets.
7. Press SELECT to save. You hear
a confirmation tone and then the
handset returns to the previous
menu.
If the telephone number in the directory
exceeds 15 digits, a dash appears after
the 14th digit and then the remaining
digits are shown beginning with a dash
alternately.
-OR-
1. Use the dialing keys to enter a
number (up to 30 digits) when the
phone is not in use. Press SELECT.
The handset displays Enter number.
-OR-
Add a directory entry
Copy a number from the redial list by
1. Press MENU when the phone is not
pressing REDIAL. Then press
,
in use.
, or REDIAL repeatedly to find the
desired number. Press SELECT for
three times to copy the number.
2. Press or to highlight Directory,
and then press SELECT.
3. Press SELECT to choose
2. Press SELECT to move on to the
Add contact.
name.
4. When Enter number displays, use
the dialing keys to enter a number
(up to 30 digits).
3. When Enter name displays, use
the dialing keys to enter a name (up
to 15 characters). Each time you
press a key, the character on that
key appears. Additional key presses
produce other characters on that key.
Press the key repeatedly until the
desired character appears. The first
character of every
-OR-
Copy a number from the redial list
by pressing REDIAL. Then press
,
, or REDIAL repeatedly to find the
desired number. Press SELECT to
copy the number.
word is capitalized.
5. Press SELECT to move on to the
name.
4. Press SELECT to save. The handset
displays Saved and then returns
to the previous menu. You hear a
confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
While entering names and numbers,
you can:
-OR-
i. Press MENU when the phone is
not in use.
• Press or to move the cursor to
the left or right.
ii. Press or to highlight
Directory, and then press
SELECT.
• Press DELETE to erase a digit.
• Press and hold DELETE to erase
iii. Press or to highlight Review,
all digits.
and then press SELECT.
• Press and hold PAUSE to enter a
2. Use the dialing keys to enter the
letter associated with the name.
For example, if you have entries for
Jenny, Jessie, Kristen and Laura in
your directory, press 5 (JKL) once
to see Jenny (when Jenny displays,
press to see Jessie), twice to see
Kristen, or three times to see Laura.
If there is no name entry matching
your search, the next closest match
in alphabetical order appears. If
necessary, press or to browse.
dialing pause (a p appears).
• Press 0 to add a space.
Review directory entries
Directory entries appear alphabetically.
1. Press
when the phone is not in
use. The handset displays Entries
in DIR X for a few seconds, and
then displays the first entry in the
directory.
2. Press or to browse through the
directory.
Delete a directory entry
-OR-
1. Search for the desired entry in the
directory (see Review and dial
from the directory or Alphabetical
search).
1. Press MENU when the phone is not
in use.
2. Press or to highlight Directory,
and then press SELECT.
2. When the desired entry appears,
press DELETE. The screen displays
Delete contact? and the number.
3. Press or to highlight Review, and
then press SELECT.
4. The handset displays Entries in
DIR X for a few seconds and then
displays the first directory entry.
Press or to browse through the
directory.
3. Press SELECT to confirm. The
screen displays Deleting ... and
then Contact deleted. You hear a
confirmation tone.
NOTE
Dial a directory entry
• If the telephone number in the directory
exceeds 15 digits, - appears in front of the
telephone number and shows the remaining
numbers alternately.
1. Search for the desired entry in the
directory (see Review directory
entries or Alphabetical search).
2. Press
or to dial.
Alphabetical search
1. Press
use.
when the phone is not in
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Speed dial
Reassign a speed dial entry
You can copy up to 9 directory entries
into the speed dial locations (0 and
2-9) so that you can dial these numbers
using fewer keys than usual.
1. Press MENU when the phone is not
in use.
2. Press or to scroll to Directory,
then press SELECT.
The speed dial memory locations are
stored in the telephone base and are
shared by all handsets. Changes made
to the speed dial entries on one handset
apply to all.
3. Press or to scroll to Speed dial,
then press SELECT.
4. Press or , or use the dialing keys
to choose the speed dial location you
want to reassign.
5. Press SELECT twice. The screen
Assign a speed dial entry
1. Press MENU when the phone is not
displays Reassign SD.
6. Press SELECT. The screen displays
Copy from DIR... and then the first
entry of the directory.
in use.
2. Press or to scroll to Directory,
then press SELECT.
7. Press or to browse to the desired
entry.
3. Press or to scroll to Speed dial,
then press SELECT.
-OR-
4. Press or or the dialing keys (0 or
2-9) to choose the desired speed dial
location.
Use the alphabetical search to find
the desired entry.
8. Press SELECT to save. You hear
a confirmation. The name (up to 12
characters) appears in the selected
speed dial location.
5. Press SELECT. The screen displays
Copy from DIR... and then the first
entry in the directory.
6. Press or to browse to the desired
entry.
Dial a speed dial number
• Press and hold a dialing key (0 or
2-9) to dial the number stored in the
corresponding speed dial location.
-OR-
Use the alphabetical search to find the
desired entry.
7. Press SELECT to save. You hear
a confirmation. The name (up to 12
characters) appears in the selected
speed dial location.
When the speed dial location is empty,
the screen displays the speed dial list.
See Assign a speed dial entry to add a
new entry.
NOTES
• If the directory is empty, when you press
SELECT in Step 5, the screen displays
Directory empty.
• If the speed dial location you selected is
occupied, the new directory entry you
selected replaces the old one.Take caution
not to replace entries you do not wish to
delete from the speed dial locations.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Delete a speed dial entry
1. Press MENU when the phone is not
Caller ID
If you subscribe to caller ID service,
information about each caller appears
after the first or second ring. If
you answer a call before the caller
information appears on the screen, it
will not be saved in the caller ID log.
in use.
2. Press or to scroll to Directory,
then press SELECT.
3. Press or to scroll to Speed dial,
then press SELECT.
The caller ID log stores up to 50 entries.
Each entry has up to 24 digits for the phone
number and 15 characters for the name.
4. Press or , or use the dialing keys
to choose the desired speed dial
location, then press DELETE. The
screen displays Clear SD #X?
If the telephone number has more that
15 digits, only the last 15 digits appear.
5. Press SELECT to confirm. You hear
a confirmation tone.
If the name has more than 15 characters,
only the first 15 characters are shown
and saved in the caller ID log.
NOTE
• Deleting the speed dial entries does not
affect the entries in the directory.
Entries appear in reverse chronological
order. When the caller ID log is full, the
oldest entry is deleted to make room for
new incoming call information.
Caller ID log entries are shared by all
system handsets (for multiple handset
models only). Any deletions made on
one handset are reflected on all other
handsets.
NOTE
• This product can provide information
only if both you and the caller are in
areas offering caller ID service and if
both telephone service providers use
compatible equipment. The time and
date are sent by your telephone service
provider along with the call information.
Review the caller ID log
Review the caller ID log to find out who
called, to return the call, or to copy the
caller’s name and number into your
directory.
1. Press CID when the phone is not in
use. The handset displays the first
entry in the caller ID log.
2. Press or to browse.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
-OR-
If you do not want to review the missed
calls one by one, press and hold
CANCEL on the handset when not in
use to clear the missed call indicator. All
the entries are then considered old and
kept in the caller ID log.
1. Press MENU when the phone is not
in use.
2. Press or to scroll to Caller ID
log, and then press SELECT twice
to choose Review. The handset
displays the first entry in the caller ID
log.
View dialing options
Although the caller ID log entries
received have 10 digits (the area code
plus the seven-digit number), in some
areas, you may need to dial only the
seven digits, or 1 plus the seven digits,
or 1 plus the area code plus the seven
digits. You can change the number of
digits that you dial from the caller ID
log and store the new number to the
directory.
3. Press or to browse.
NOTE
• You hear a double beep when you reach
the beginning or end of the caller ID log.
Memory match
If the incoming telephone number
matches the last seven digits of a
telephone number in your directory,
the name that appears on the screen
matches the corresponding name in
your directory.
While reviewing the caller ID log, press
(pound key) repeatedly to display
different dialing options for local and
long distance numbers before dialing
or saving the telephone number in the
directory.
For example, if Linda Jones Smith calls,
his name appears as Linda if this is
how you entered it into your directory.
NOTE
Press 1 repeatedly if you need to add
or remove 1 in front of the telephone
number before dialing or saving it in
the directory.
The number shown in the caller ID log will be
in the format sent by the telephone service
provider. The telephone service provider
usually delivers 10-digit phone numbers
(area code plus telephone number). If the
phone number of the caller does not match
a number in your directory, the name will
appear as it is delivered by the telephone
service provider.
When the number is displayed in
the correct format for dialing, press
or to dial.
Dial a caller ID log entry
Missed call indicator
1. Search for the desired caller ID log
When there are calls that have not
been reviewed in the caller ID log, the
handsets display XX missed calls.
entry (see Review the Caller ID log).
2. When the desired entry displays,
press
or to dial.
Each time you review a caller ID log
entry marked NEW, the number of
missed calls decreases by one.
When you have reviewed all the
missed calls, the missed call indicator
goes away.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
To delete all entries:
1. Press MENU when the phone is not
Save a caller ID log entry to the
directory
1. Search for the desired caller ID log
in use.
2. Press or to scroll to Caller ID
log, and then
entry (see Review the Caller ID log).
2. When the desired entry displays,
press SELECT.
press SELECT.
3. Press or to scroll to Del all calls,
3. Press SELECT to choose To
Directory. Then the handset displays
Enter number.
and then press SELECT.
4. When the screen shows Delete all?
Press SELECT to confirm. The
screen displays Deleting... and then
you hear a confirmation tone.
4. Use the dialing keys to edit the
number, when necessary. Press
SELECT to move to the name. The
handset displays Enter name.
5. Use the dialing keys to add or edit the
name.
Sound settings
Key tone
6. Press SELECT when done and the
screen shows Saved.
You can turn the key tone on or off for
each handset. If you turn the key tone
off, there are no beeps when you press
the handset keys.
While entering names and numbers,
you can:
• Press or to move the cursor to
the left or right.
1. Press MENU when the handset is not
in use.
• Press DELETE to erase a digit.
2. Press or to highlight Settings,
• Press and hold DELETE to erase
and then press SELECT.
all digits.
3. Press or to highlight Key tone,
• Press and hold PAUSE to enter a
and then press SELECT.
dialing pause (a p appears).
4. Press or to highlight Key tone:On
• Press 0 to add a space.
or Key tone:Off.
NOTE
5. Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
• If you save an entry which already exists
in the directory, the handset displays
Number repeated and then returns to
previous screen.
Delete the caller ID log entries
Ringer tone
1. Search for the desired caller ID log
You can choose from different ringer
tones for each handset.
entry (see Review the Caller ID log).
2. Press DELETE to delete the
1. Press MENU when the handset is not
displayed entry.
in use.
2. Press or to highlight Ringers,
and then press SELECT.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
3. Press or to highlight Ringer
tone, and then press SELECT.
To silence the handset ringer:
4. Press or to sample each ringer
tone.
• Press OFF or MUTE on the handset
and it displays Ringer muted and
.
5. Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
NOTES
•
Each handset and the base ring when
there is an incoming call unless the ringer
volume of that device is turned off.
NOTE
Quiet mode
• If you turn off the ringer volume, you will
not hear ringer tone samples.
You can turn on the quiet mode for a
period of time (1-12 hours). During this
period, all tones (except paging tone)
are muted.
Handset ringer volume
You can set the ringer volume or turn
the ringer off on each handset. When
1. Press and hold
) when the
the ringer is off,
screen.
appears on the
handset is not in use.
2. The handset displays Quiet: _ _
hours. Use the dialing keys (0-9) to
enter the desired duration (1-12).
1. Press MENU when the handset is not
in use.
2. Press or to highlight Ringers,
3. Press SELECT to save. You hear a
confirmation tone.
and then press SELECT.
3. Press or to select Ringer
The handset displays Quiet mode on
volume, and then press SELECT.
and
.
4. Press or to sample each volume
level.
To turn off the quiet mode:
•
Press and hold
when the handset
5. Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
is not in use. The handset displays Quiet
mode off briefly and then returns to idle.
NOTE
• When you change the settings of the ringer
tone or ringer volume, you can still hear
the samples even if the quiet mode is on.
NOTE
• The ringer volume also determines the
ringer volume for intercom calls. If the
ringer volume is set to off, that handset
is silenced for all incoming calls except
paging tone.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the
handset without disconnecting the call.
The next call rings normally at the preset
volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Retrieve voicemail from
telephone service
Expand your telephone
system
Voicemail is a feature available from
most telephone service providers. It
may be included with your telephone
service, or may be optional. Fees may
apply.
You can add new handsets (CS6709,
purchased separately) to your telephone
system. Your telephone base supports a
maximum of five handsets.
For more details, refer to the user’s
manual that comes with your CS6709
new handset.
Retrieve voicemail
When you received a voicemail, the
handset displays New voicemail
and
.
To retrieve, you typically dial an access
number provided by your telephone
service provider, and then enter a
security code. Contact your telephone
service provider for instructions on how
to configure the voicemail settings and
listen to messages.
Turn off the new voicemail
indicators
If you have retrieved your voicemail
while away from home, and the
handset still displays the new voicemail
indicators, use this feature to turn off the
indicators.
NOTE
• This feature turns off the indicators only, it
does not delete your voicemail messages.
1. Press MENU when the handset is not
in use.
2. Press or to highlight Settings,
and then press SELECT.
3. Press or to highlight Clr
voicemail, and then press SELECT.
The handset displays Reset VM
icon?.
4. Press SELECT to save your
selection. You hear a confirmation
tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Screen messages
A system handset or
another telephone on
the same line is
in use.
Line in use
Low battery
There are no caller ID
log entries.
Call log
empty
The battery needs to
be recharged.
You are calling
another handset (for
intercom calls).
Calling HS X
(for models with two
or more
MUTE is turned off
and the person on the
other end can hear
you.
Microphone
on
handsets only)
A directory entry is
deleted.
Contact
deleted
You have turned
off the handset
microphone. The
other party cannot
hear you but you can
hear the other party.
Muted
There are no directory
entries.
Directory
empty
The directory is full.
You cannot save any
new entry unless you
delete some current
entries.
Directory
full
There are new
New
voicemail
voicemail message(s)
from your telephone
service provider.
You have just ended
a call.
Ended
You place the handset
in the telephone base
or charger without
installing a battery
in it.
No battery
The handset
registration is not
successful.
Failed
Another handset is
calling (for intercom
calls).
HS X is
calling
(for models with two
or more handsets
only)
There is no telephone
line connected.
No line
Another handset
is already in the
directory or caller ID
log.
Not
available
There is an incoming
call.
Incoming
call
Two handsets are
required for an
intercom call.
The telephone
INT needs 2
HS
Number
number you have
entered is already
stored in the directory.
repeated
The handset is on an
intercom call.
Intercom
The telephone base
has lost power, or
the handset is out of
range.
Out of range
or no pwr at
base
The intercom call has
just ended.
Intercom
ended
You have started the
intercom process or
started transferring a
call, and need to enter
the desired handset
number.
The handset is on a
call.
Intercom to
Phone
(for models with
three or more
handsets only)
The battery is very
low. Put the handset
in the telephone
base or charger for
recharging.
Put in
charger
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Frequently asked
questions
Below are the questions most frequently
asked about the cordless telephone.
If you cannot find the answer to your
question, visit our website at
The quiet mode is
turned off.
Quiet mode
off
The quiet mode is
turned on.
Quiet mode
on
The handset
registration is in
progress.
Registering...
www.vtechphones.com or call
The handset ringer
is muted temporarily
during an incoming
call.
Ringer muted
1 (800) 595-9511 for customer service.
My telephone Make sure the telephone
does not work base is installed properly,
at all.
and battery is installed
and charged correctly.
For optimum daily
The handset ringer is
turned off.
Ringer off
Saved
Your selection has
been saved.
performance, return the
handset to the telephone
base after use.
The handset
speakerphone is in
use.
Speaker
The display
shows No
line. I cannot
hear the dial
tone.
Disconnect the telephone
line cord from your
telephone and connect
it to another telephone.
If there is no dial tone
on that other telephone
either, then the telephone
line cord may be defective.
Try installing a new
Screen display on
a non-registered
handset.
To register
HS...
...see manual
You have transferred
an outside call to
another cordless
handset.
Transferred
telephone line cord.
If changing telephone line
cord does not help, the
wall jack (or the wiring to
this wall jack) may be
defective. Contact your
telephone service provider.
The handset is out of
range while on a call.
Unable to
call
Failed phone call (the
telephone line is in
use).
You may be using a new
cable or VoIP service, the
existing telephone jacks in
your home may no longer
work. Contact your service
provider for solutions.
Failed intercom call
(there are already two
handsets being used).
There are new calls in
the caller ID log.
XX missed
calls
All system handsets
are being paged.
** Paging **
Download from Www.Somanuals.com. All Manuals Search And Download.
25
I cannot dial
out.
Make sure there is a dial
tone before dialing. It is
normal if the handset
takes a second or two
to synchronize with the
telephone base before
producing a dial tone. Wait
an extra second before
dialing.
My handset
beeps
and is not
performing
normally.
Move the handset closer
to the telephone base. It
may be out of range.
I hear other
calls when
using the
Disconnect the telephone
base from the telephone
wall jack. Plug in a
telephone.
different telephone. If you
still hear other calls, the
problem is probably in
the wiring or telephone
service. Contact your
telephone service
Eliminate any background
noise. Mute the handset
before dialing, or dial
from another room in
your home with less
background noise.
provider.
I hear noise
on the
Make sure the telephone
line cord is plugged in
securely.
The display
shows To
register HS...
and ...see
manual
alternately.
The handset
does not work
at all.
The handset is
cordless
deregistered from the
telephone base.
handset and
the keys do
not work.
Place the handset in the
telephone base to register
it back. The handset
shows Registered and
you hear a beep when
the registration process
completes. This process
takes about 90 seconds to
complete.
The display
shows Low
battery.
Place the handset in the
telephone base or charger
for charging.
The battery
does not
Make sure the handset is
placed in the telephone
base or charger correctly.
charge in the
handset or
the handset
battery does
not accept
charge.
If the battery is completely
depleted, charge the
battery for at least 30
minutes before use.
You may need to purchase
a new battery.
The telephone Make sure the ringer
does not ring volume is not set to off.
when there is
The handset may be too
an incoming
far from the telephone
call.
base. Move it closer to the
telephone base.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
There is
interference
during a
telephone
conversation.
My calls fade
out when
I am using
the cordless
handset.
The handset may be out
of range. Move it closer to
the telephone base.
The telephone Caller ID is a subscription
does not service.You must
receive caller subscribe to this service
ID or the
telephone
does not
show caller
ID during call
waiting.
from your telephone
service provider for this
feature to work on your
telephone.
If you subscribe to high-
speed Internet service
(DSL - digital subscriber
line) through your
telephone line, you must
install a DSL filter between
the telephone line cord
and the telephone wall
jack.The filter prevents
noise and caller ID
problems caused by DSL
interference. Contact your
DSL service provider for
more information about
DSL filters.
Both your and the
caller’s telephone service
providers must use
equipment compatible
with the caller ID service.
The caller may not be
calling from an area which
supports caller ID.
The caller ID information
displays after the first or
second ring.
Appliances or other
cordless telephones
plugged into the same
circuit as the telephone
base can cause
The display
The handset may be out
shows Out of of range. Move it closer to
range or no
pwr at base.
the telephone base.
interference. Try moving
the appliance or telephone
base to another outlet.
Make sure the power cord
is securely plugged into
the telephone base. Use
a working electrical outlet
not controlled by a wall
switch.
The location of your
telephone base can
impact the performance
of your cordless phone.
For better reception,
install the telephone base
in a centralized location
within your home or
office, away from walls
or other obstructions.
In many environments,
elevating the telephone
base improves overall
performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
I subscribe
to a
Make sure your computer
is powered on, and
ECO mode
This power conserving technology
reduces power consumption for optimal
battery performance. The ECO mode
activates automatically whenever
the handset is synchronized with the
telephone base.
nontraditional your Internet is working
telephone
service that
uses my
properly.
Make sure to plug your
USB telephone adapter
into a dedicated USB port
on your computer. Do not
plug into a multiple port
USB hub (USB splitter)
that is not powered.
computer
to establish
connections,
and my
The handset shows ECO when the
ECO mode activates.
telephone
doesn’t work.
In a few rare instances,
the USB port on your
computer may not have
enough power. In these
instances, try using a USB
hub with its own external
power supply.
If you are using a firewall,
it may prevent access
to your nontraditional
telephone service. Contact
your service provider for
more information.
I accidentally
set my LCD
language
While the handset is not in
use or is on a call, press
MENU and then enter
364# to change the
handset LCD language
back to English.
to Spanish
or French,
and I don’t
know how to
change it back
to English.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
General product care
The RBRC® seal
The RBRC® seal on the nickel-metal
hydride battery indicates that VTech
Communications, Inc. is voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
Taking care of your telephone
Your cordless telephone contains
sophisticated electronic parts, so it must
be treated with care.
Avoid rough treatment
Place the handset down gently. Save the
original packing materials to protect your
telephone if you ever need to ship it.
The RBRC® program provides a
convenient alternative to placing used
nickel-metal hydride batteries into the
trash or municipal waste, which may be
illegal in your area.
VTech’s participation in RBRC® makes it
easy for you to drop off the spent battery
at local retailers participating in the
RBRC® program or at authorized VTech
product service centers. Please call
1 (800) 8 BATTERYTM for information
on Ni-MH battery recycling and disposal
bans/restrictions in your area. VTech’s
involvement in this program is part of its
commitment to protecting our environment
and conserving natural resources.
Avoid water
Your telephone can be damaged if
it gets wet. Do not use the handset
outdoors in the rain, or handle it with wet
hands. Do not install the telephone base
near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause
power surges harmful to electronic
equipment. For your own safety, take
caution when using electrical appliances
during storms.
Cleaning your telephone
Your telephone has a durable plastic
casing that should retain its luster for
many years. Clean it only with a dry non-
abrasive cloth. Do not use dampened
cloth or cleaning solvents of any kind.
RBRC® is a registered trademark
of Rechargeable Battery Recycling
Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
and (2) this device must accept
any interference received, including
interference that may cause undesired
operation. Privacy of communications
may not be ensured when using this
telephone.
FCC, ACTA and IC
regulations
FCC Part 15
This equipment has been tested and
found to comply with the requirements
for a Class B digital device under Part
15 of the Federal Communications
Commission (FCC) rules. These
To ensure safety of users, the FCC
has established criteria for the amount
of radio frequency energy that can be
safely absorbed by a user or bystander
according to the intended usage of the
product. This product has been tested
and found to comply with the FCC
criteria. The handset may be safely
held against the ear of the user. The
telephone base shall be installed and
used such that parts of the user’s body
other than the hands are maintained at
a distance of approximately 20 cm
(8 inches) or more.
requirements are intended to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
This Class B digital apparatus complies
with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
FCC Part 68 and ACTA
This equipment complies with
• Reorient or relocate the receiving
antenna.
Part 68 of the FCC rules and with
technical requirements adopted by the
Administrative Council for Terminal
Attachments (ACTA). The label on
the back or bottom of this equipment
contains, among other things, a
product identifier in the format US:
AAAEQ##TXXXX. This identifier must
be provided to your telephone service
provider upon request.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications to this
equipment not expressly approved by
the party responsible for compliance
could void the user’s authority to
operate the equipment.
The plug and jack used to connect this
equipment to premises wiring and the
telephone network must comply with
applicable Part 68 rules and technical
requirements adopted by ACTA. A
compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a compatible
modular jack that is also compliant. An
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference,
Download from Www.Somanuals.com. All Manuals Search And Download.
30
RJ11 jack should normally be used for
connecting to a single line and an RJ14
jack for two lines. See the installation
instructions in the user’s manual.
may make changes in its facilities,
equipment, operation, or procedures
that could affect the proper functioning
of this product. The telephone service
provider is required to notify you if such
changes are planned.
The Ringer Equivalence Number (REN)
is used to determine how many devices
you may connect to your telephone
line and still have them ring when you
are called. The REN for this product is
encoded as the 6th and 7th characters
following the US: in the product identifier
(e.g., if ## is 03, the REN is 0.3). In
most, but not all areas, the sum of
all RENs should be five (5.0) or less.
For more information, contact your
telephone service provider.
If this product is equipped with a corded
or cordless handset, it is hearing aid
compatible.
If this product has memory dialing
locations, you may choose to store
emergency telephone numbers (e.g.,
police, fire, medical) in these locations.
If you do store or test emergency
numbers, please:
Remain on the line and briefly explain
the reason for the call before hanging up.
This equipment may not be used with
Party Lines. If you have specially wired
alarm dialing equipment connected
to your telephone line, ensure the
Perform such activities in off-peak hours,
such as early morning or late evening.
connection of this equipment does not
disable your alarm equipment. If you
have questions about what will disable
alarm equipment, consult your telephone
service provider or a qualified installer.
Industry Canada
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
If this equipment is malfunctioning, it
must be unplugged from the modular jack
until the problem has been corrected.
Repairs to this telephone equipment can
only be made by the manufacturer or its
authorized agents. For repair procedures,
follow the instructions outlined under the
Limited warranty.
Privacy of communications may not be
ensured when using this phone.
The term ‘’IC:‘’ before the certification/
registration number only signifies
that the Industry Canada technical
specifications were met.
If this equipment is causing harm to
the telephone network, the telephone
service provider may temporarily
The Ringer Equivalence Number (REN)
for this terminal equipment is 0.1. The
REN is an indication of the maximum
number of devices allowed to be connected
to a telephone interface. The termination
on an interface may consist of any
combination of devices subject only to
the requirement that the sum of the RENs
of all the devices does not exceed five.
discontinue your telephone service. The
telephone service provider is required
to notify you before interrupting service.
If advance notice is not practical, you
will be notified as soon as possible. You
will be given the opportunity to correct
the problem and the telephone service
provider is required to inform you of
your right to file a complaint with the
FCC. Your telephone service provider
This product meets the applicable
Industry Canada technical
specifications.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
California Energy
Commission battery
charging testing
instructions
This telephone meets the California Energy
Commission (CEC) regulations for energy
consumption. It is not necessary to activate
the energy conserving mode during normal
usage, unless you want to charge the battery
only and disable all telephone functions.
For C-UL compliance only
Mesures de sécurité
importantes
Afin de réduire les risques d’incendie,
de blessures corporelles ou
d’électrocution, suivez toujours ces
mesures préventives de base lorsque
vous utilisez votre téléphone :
1. Lisez et comprenez bien toutes les
instructions.
2. Observez toutes les instructions
et mises en garde inscrites sur
l’appareil.
To activate the CEC battery charging
testing mode:
1.Unplug the telephone base power
adapter from the power outlet. Make sure
all handsets are plugged with charged
batteries before proceeding.
3. Débranchez ce téléphone de la prise
murale avant de le nettoyer. N’utilisez
pas de nettoyeurs liquides ni en
aérosol. N’utilisez qu’un chiffon doux
et légèrement humecté.
4. N’utilisez pas ce produit près de l’eau,
tel que près d’un bain, d’un lavabo,
d’un évier de cuisine, d’un bac de
lavage ou d’une piscine, ou dans un
sous-sol humide ou sous la douche.
5. Ne déposez pas ce téléphone sur un
chariot, support ou table chancelants.
L’appareil pourrait tomber et être
sérieusement endommagé.
6. Le boîtier de l’appareil est doté de
fentes et d’ouvertures d’aération
situées à l’arrière ou en dessous.
Afin d’empêcher la surchauffe,
ces ouvertures ne doivent pas être
obstruées en plaçant l’appareil sur
un lit, divan, tapis ou autre surface
similaires. Ne placez pas cet
appareil à proximité d’un élément de
chauffage ni d’une plinthe électrique.
De plus, ne l’installez pas dans une
unité murale ou un cabinet fermé qui
ne possède pas d’aération adéquate.
7. Ne faites fonctionner cet appareil
qu’avec le type d’alimentation indiqué
sur les étiquettes de l’appareil. Si
2.While you press and hold
/FIND HANDSET, plug the telephone base
power adapter back to the power outlet.
3.After about 20 seconds, when the
IN USE light starts flashing, release
/FIND HANDSET and then press it again
within 2 seconds.
The process takes up to one minute to
complete. When the phone successfully
enters the CEC battery charging testing
mode, the IN USE light turns off and all
handsets display To register HS... and
...see manual alternately.
When the phone fails to enter this mode,
repeat Step 1 through Step 3 above. The
telephone base will be powered up as
normal if you fail to press /FIND HANDSET
within 2 seconds in Step 3.
To deactivate the CEC battery charging
testing mode:
1.Unplug the telephone base power adapter
from the power outlet, and then plug
it back in. Then the telephone base is
powered up as normal.
2.Place the handset in the telephone base
to register it back. The handset displays
Registering....
NOTE
The handset shows Registered and you hear a
beep when the registration process completes.
The registration process takes about 90 seconds
to complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
vous ne connaissez pas le voltage
de votre maison, consultez votre
marchand ou votre fournisseur
d’électricité.
• Si le produit ne fonctionne pas
• normalement en respectant les
instructions de fonctionnement.
Réglez uniquement les
commandes indiquées dans le les
instructions de fonctionnement.
Les réglages incorrects des autres
commandes pourraient provoquer
un dommage qui pourrait exiger
un travail exhaustif de la part d’un
technicien autorisé afin de rétablir
le fonctionnement normal de
8. Ne déposez rien sur le cordon
d’alimentation. Installez cet appareil
dans un endroit sécuritaire, là où
personne ne pourra trébucher sur
la ligne d’alimentation ni le cordon
téléphonique modulaire.
9. N’insérez jamais d’objets à travers
les fentes et ouvertures de cet
appareil, car ils pourraient toucher
à des points de tension dangereux
ou court-circuiter des pièces, ce qui
constituerait un risque d’incendie ou
d’électrocution. N’échappez pas de
liquides dans l’appareil.
10.Afin de réduire les risques
d’électrocution, ne démontez pas
l’appareil, mais apportez-le plutôt
à un centre de service qualifié s’il
doit être réparé. En enlevant le
couvercle, vous vous exposez à des
tensions dangereuses ou autres
dangers similaires. Un remontage
inadéquat peut être à l’origine d’une
électrocution lors d’une utilisation
ultérieure de l’appareil. Débranchez
l’appareil avant de procéder au
nettoyage. Utilisez un chiffon humide
et doux.
l’appareil.
• Si le produit a été échappé et que
le socle et/ou le combiné a été
endommagé.
• Si le produit affiche une nette
diminution de sa performance.
13.Évitez d’utiliser un téléphone (autre
qu’un sans fil) pendant un orage.
Les éclairs peuvent être à l’origine
d’une électrocution.
14.N’utilisez pas le téléphone pour
rapporter une fuite de gaz à
proximité de la fuite. En certaines
circonstances, une flammèche
pourrait être provoquée lorsque
l’adaptateur est branché à une
prise de courant, ou lorsque le
combiné est déposé sur le socle.
Ceci est un événement commun
associé à la fermeture d’un circuit
électrique. L’utilisateur ne devrait pas
brancher le téléphone à une prise de
courant, et ne devrait pas déposer
le combiné chargé sur le socle, si
le téléphone se trouve à proximité
d’un endroit comportant des
concentrations de gaz inflammables,
à moins que la ventilation soit
adéquate. Une flammèche dans
un tel endroit pourrait provoquer
un incendie ou une explosion.
De tels environnements peuvent
comprendre: des endroits où l’on
utilise de l’oxygène médical sans
11.Ne surchargez pas les prises de
courant et les rallonges.
12.Débranchez cet appareil de la prise
de courant et communiquez avec le
département de service à la clientèle
de VTech dans les cas suivants:
• Lorsque le cordon d’alimentation
est endommagé ou écorché.
• Si du liquide a été échappé dans
l’appareil.
• Si l’appareil a été exposé à une
source d’humidité telle que la
pluie ou l’eau.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
ventilation adéquate; des gaz
de recherche indépendante, a mené
industriels (dissolvants de nettoyage, une évaluation pluridisciplinaire des
des vapeurs d’essence, etc.); une
fuite de gaz naturel, etc.
interférences entre les téléphones
sans fil portatifs et les stimulateurs
cardiaques implantés dans l’organisme.
Appuyée par l’Administration des
aliments et drogues (FDA) des États-
Unis, la firme WTR recommande aux
médecins:
15.Ne placez que le combiné de votre
téléphone près de votre oreille
lorsqu’en mode de conversation.
16.Ces adaptateurs ont été conçus pour
être orientés en position verticale
ou montés au sol. Les broches ne
sont pas conçues pour maintenir
l’adaptateur en place si celui-ci est
barnché dans une prise au plafond
ou sous une table/ armoire.
Avis aux détenteurs de stimulateurs
cardiaques
• Ils doivent tenir le téléphone sans fil
à une distance d’au moins six pouces
du stimulateur cardiaque.
• Ils ne doivent PAS placer le téléphone
sans fil directement sur le stimulateur
cardiaque, tel que dans une poche
de chemise, lorsque celui-ci est en
marche.
• Ils doivent utiliser le téléphone sans
fil en l’appuyant sur l’oreille qui se
trouve dans la direction opposée au
stimulateur cardiaque.
CONSERVEZ CES INSTRUCTIONS
Pile
• MISE EN GARDE : N’utilisez que la
pile incluse.
• Ne jetez pas la pile au feu. Vérifiez
les instructions spécifiques de mise
aux rebus auprès des autorités
locales.
• N’ouvrez pas et ne mutilez pas la
pile. L’électrolyte qui s’en échapperait
est corrosif et pourrait causer des
brûlures ou des blessures aux yeux
ou à la peau. L’électrolyte est toxique
si avalé.
L’étude effectuée par l’organisme WRS
n’a pas identifié de risque pour les
détenteurs de simulateurs cardiaques
causés par les gens qui utilisent un
téléphone sans fil à proximité de ceux-ci.
• Soyez prudents lorsque vous
manipulez les piles afin d’éviter les
courts-circuits provoqués par des
matériaux conducteurs.
• Rechargez la pile incluse avec cet
appareil, selon les instructions et
limites spécifiées dans ce guide
d’utilisation.
À propos des téléphones sans fil
• Alimentation électrique: Les mêmes
caractéristiques qui constituent
des avantages pour les téléphones
sans fil affichent également des
restrictions. Les appels téléphoniques
sont transmis entre le combiné sans
fil et le socle par le biais d’ondes
radio ; il y a donc la possibilité que
vos conversations téléphoniques
sans fil soient interceptées par
Stimulateurs cardiaques implantés
dans l’organisme
Les simulateurs cardiaques (s’applique
uniquement aux téléphones numériques
sans fil):
des équipements de réception
radio se trouvant dans la portée du
combiné sans fil. Pour cette raison,
vous ne devez pas percevoir les
L’organisme ‘Wireless Technology
Research, LLC (WTR)’, une firme
Download from Www.Somanuals.com. All Manuals Search And Download.
34
communications téléphoniques sans fil
comme étant aussi confidentielles.
Limited Warranty
What does this limited warranty
cover?
• Alimentation électrique: Le socle
de ce téléphone sans fil doit être
branché à une prise électrique
fonctionnelle. La prise électrique
ne doit pas être contrôlée par un
interrupteur mural. Les appels ne
pourront pas être effectués du
combiné sans fil si le socle est
débranché ou mis hors tension ou si
le courant est coupé.
The manufacturer of this VTech Product
warrants to the holder of a valid proof of
purchase (“Consumer” or “you”) that the
Product and all accessories provided
in the sales package (“Product”)
are free from defects in material and
workmanship, pursuant to the following
terms and conditions, when installed
and used normally and in accordance
with the Product operating instructions.
This limited warranty extends only to the
Consumer for Products purchased and
used in the United States of America
and Canada.
• Possibilité d’interférences aux
téléviseurs: Certains téléphones
sans fil fonctionnent sur des
fréquences pouvant causer des
interférences aux téléviseurs et aux
magnétoscopes. Pour réduire ou
prévenir de telles interférences, ne
placez pas le socle du téléphone
sans fil près ou sur un téléviseur ou
magnétoscope. S’il y a présence de
parasites, il est conseillé d’éloigner
le téléphone sans fil du téléviseur
ou du magnétoscope afin de réduire
possiblement les interférences.
What will VTech do if the Product is
not free from defects in materials
and workmanship during the
limited warranty period (“Materially
Defective Product”)?
During the limited warranty period,
VTech’s authorized service
representative will repair or replace
at VTech’s option, without charge, a
Materially Defective Product. If we
repair the Product, we may use new or
refurbished replacement parts. If we
choose to replace the Product, we may
replace it with a new or refurbished
Product of the same or similar design.
We will retain defective parts, modules,
or equipment. Repair or replacement of
the Product, at VTech’s option, is your
exclusive remedy. VTech will return the
repaired or replacement Products to
you in working condition. You should
expect the repair or replacement to take
approximately 30 days.
• Piles rechargeables: Manipulez
les piles avec soin afin de ne pas
les court-circuiter avec des bagues,
bracelets ou clés. Les piles ou le
conducteur peut surchauffer et
causer des blessures. Respectez la
polarité adéquate entre la pile et le
chargeur.
• Les bloc-piles rechargeables à
l’hydrure métallique de nickel:
Jetez ces blocs-piles de manière
écologique et sécuritaire. Ne les
incinérez pas et ne les percez pas.
Tel que les autres piles de ce type,
elles pourraient dégager une matière
toxique qui peut causer des blessures
corporelles si elles sont brûlées ou
percées.
How long is the limited warranty
period?
The limited warranty period for the
Product extends for ONE (1) YEAR from
the date of purchase. If VTech repairs or
replaces a Materially Defective Product
under the terms of this limited warranty,
this limited warranty also applies to
the repaired or replacement Product
Download from Www.Somanuals.com. All Manuals Search And Download.
35
for a period of either (a) 90 days from
the date the repaired or replacement
Product is shipped to you or (b) the
time remaining on the original one-year
warranty; whichever is longer.
How do you get warranty service?
To obtain warranty service in the United
States of America, please visit our
call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial
1 (800) 267-7377.
What is not covered by this limited
warranty?
NOTE: Before calling for service, please
review the user’s manual - a check of
the Product’s controls and features may
save you a service call.
This limited warranty does not cover:
1. Product that has been subjected
to misuse, accident, shipping or
other physical damage, improper
installation, abnormal operation or
handling, neglect, inundation, fire,
water or other liquid intrusion; or
2. Product that has been damaged due
to repair, alteration or modification
by anyone other than an authorized
service representative of VTech; or
3. Product to the extent that the
problem experienced is caused by
signal conditions, network reliability,
or cable or antenna systems; or
4. Product to the extent that the
problem is caused by use with non-
VTech accessories; or
5. Product whose warranty/quality
stickers, product serial number plates
or electronic serial numbers have
been removed, altered or rendered
illegible; or
6. Product purchased, used, serviced,
or shipped for repair from outside the
United States of America or Canada,
or used for commercial or institutional
purposes (including but not limited to
Products used for rental purposes);
or
Except as provided by applicable law,
you assume the risk of loss or damage
during transit and transportation and
are responsible for delivery or handling
charges incurred in the transport of
the Product(s) to the service location.
VTech will return repaired or replaced
Product under this limited warranty.
Transportation, delivery or handling
charges are prepaid. VTech assumes no
risk for damage or loss of the Product
in transit. If the Product failure is not
covered by this limited warranty, or proof
of purchase does not meet the terms of
this limited warranty, VTech will notify
you and will request that you authorize
the cost of repair prior to any further
repair activity.You must pay for the
cost of repair and return shipping costs
for the repair of Products that are not
covered by this limited warranty.
What must you return with the
Product to get warranty service?
1. Return the entire original package
and contents including the Product to
the VTech service location along with
a description of the malfunction or
difficulty; and
2. Include a “valid proof of purchase”
(sales receipt) identifying the Product
purchased (Product model) and the
date of purchase or receipt; and
3. Provide your name, complete
and correct mailing address, and
telephone number.
7. Product returned without a valid proof
of purchase (see item 2 on the next
page); or
8. Charges for installation or set up,
adjustment of customer controls,
and installation or repair of systems
outside the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Other limitations
Technical Specifications
This warranty is the complete and
exclusive agreement between you
and VTech. It supersedes all other
written or oral communications related
to this Product. VTech provides no
other warranties for this Product. The
warranty exclusively describes all of
VTech’s responsibilities regarding the
Product. There are no other express
warranties. No one is authorized to
make modifications to this limited
warranty and you should not rely on any
such modification.
State/Provincial Law Rights: This
warranty gives you specific legal
rights, and you may also have other
rights, which vary from state to state or
province to province.
Limitations: Implied warranties,
including those of fitness for a particular
purpose and merchantability (an
Frequency
control
Crystal controlled PLL
synthesizer
Transmit
frequency
Handset:
1921.536-1928.448 MHz
Telephone base:
1921.536-1928.448 MHz
Channels
5
Nominal
effective
range
Maximum power allowed
by FCC and IC. Actual
operating range may vary
according to environment
conditions at the time of
use.
Power
requirements battery
Handset: 2.4V Ni-MH
Telephone base:
6V AC @ 300mA
unwritten warranty that the Product is
fit for ordinary use) are limited to one
year from the date of purchase. Some
states/provinces do not allow limitations
on how long an implied warranty lasts,
so the above limitation may not apply to
you. In no event shall VTech be liable
for any indirect, special, incidental,
consequential, or similar damages
(including, but not limited to lost profits
or revenue, inability to use the Product
or other associated equipment, the cost
of substitute equipment, and claims by
third parties) resulting from the use of
this Product. Some states/provinces do
not allow the exclusion or limitation of
incidental or consequential damages,
so the above limitation or exclusion may
not apply to you.
Charger: 6V AC @ 300mA
Memory
Handset directory:
50 memory locations;
up to 30 digits and
15 characters
Handset caller ID log:
50 memory locations;
up to 24 digits and
15 characters
Please retain your original sales
receipt as proof of purchase.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Designed to fit your home.
And your life.
VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
Copyright © 2014 for VTech Communications, Inc.
All rights reserved. 09/14. CS6719_CIB_V4.0
Document order number: 91-007064-020-100
Download from Www.Somanuals.com. All Manuals Search And Download.
|