User’s manual
Models:
LS6117/
LS6117-15/
LS6117-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Install an ꢀmage. . . . . . . . . . . . . . . . . . 5
Handset layout . . . . . . . . . . . . . . . . . . 6
Telephone base layout . . . . . . . . . . . . . . 7
Telephone settings . . . . . . . . . . . . . . . 8
Telephone operation . . . . . . . . . . . . . . 12
Rꢀnger mute. . . . . . . . . . . . . . . . . . . . 13
Call waꢀtꢀng . . . . . . . . . . . . . . . . . . . . 13
Chaꢀn dꢀalꢀng . . . . . . . . . . . . . . . . . . . 14
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀ
Table of contents
Appendix. . . . . . . . . . . . . . . . . . . . . 29
FCC, ACTA and IC regulatꢀons . . . . . . . . . . 48
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀꢀ
Getting started
Parts checklist
Your telephone contaꢀns the followꢀng ꢀtems. Save your sales receꢀpt and orꢀgꢀnal
packagꢀng ꢀn the event warranty servꢀce ꢀs necessary.
• To purchase
a replacement
battery or power
adapter, vꢀsꢀt our
websꢀte at www.
vtechphones.
com or call
1 (800) 595-9511.
In Canada, go to
com or call 1 (800)
267-7377.
3. Battery compartment
cover
4. Battery
5. Telephone lꢀne
cord
1. Handset
2. Transparent ꢀmage
cover
6. Telephone base
power adapter
7. Telephone base
8. User’s manual
9. Images
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Getting started
Telephone base installation
Install the telephone base as shown below. The telephone base ꢀs desꢀgned for
desk or tabletop use only. Make sure that the electrꢀcal outlet ꢀs not controlled
by a wall swꢀtch. If you subscrꢀbe to Dꢀgꢀtal Subscrꢀber Lꢀne (DSL) hꢀgh-speed
Internet service through your telephone line, you must have a DSL filter between
the telephone base and the telephone wall jack. The filter prevents noise and
caller ID problems caused by DSL ꢀnterference. Please contact your DSL servꢀce
provider for more information about DSL filters.
• Use only the
power adapter
supplꢀed wꢀth thꢀs
product. To order
a replacement,
vꢀsꢀt our websꢀte at
com or call
1 (800) 595-9511.
In Canada, go to
com or call 1 (800)
267-7377.
Telephone base
power adapter
Telephone
wall jack
• The power adapter
ꢀs ꢀntended to be
correctly orꢀented
ꢀn a vertꢀcal
Electrꢀcal outlet
not controlled by
a wall swꢀtch
DSL filter (not included)
requꢀred ꢀf you have DSL
hꢀgh-speed Internet servꢀce
or floor mount
posꢀtꢀon. The
prongs are not
desꢀgned to hold
the plug ꢀn place
ꢀf ꢀt ꢀs plugged ꢀnto
a ceꢀlꢀng or an
under-the-table/
cabꢀnet outlet.
Telephone lꢀne cord
Cord slot
Telephone base
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Battery installation and charging
CHARGE lꢀght
1. Perform steps 2 through 5 ꢀf the transparent ꢀmage cover
ꢀs attached. If the transparent ꢀmage cover ꢀs off, go to
step 6.
2. Remove the transparent ꢀmage cover by holdꢀng the
handset ꢀn your rꢀght hand wꢀth the back facꢀng up and the
CHARGE lꢀght to the left as shown ꢀn Fꢀgure 1.
3. Push the top center of the transparent ꢀmage cover to the
rꢀght wꢀth your left thumb untꢀl ꢀt unlocks.
4. Lꢀft the transparent ꢀmage cover away from the handset.
5. Remove the battery compartment cover by slꢀdꢀng ꢀt to the
rꢀght as shown ꢀn Fꢀgure 2.
6. Match the color of the battery wꢀres to the color-coded label
located ꢀnsꢀde the handset compartment on the back of the
handset, as shown ꢀn Fꢀgure 3.
• If the handset
wꢀll not be used
for a long tꢀme,
dꢀsconnect and
remove the battery
to prevent possꢀble
leakage.
Fꢀgure 1:
Remove ꢀmage cover
• To purchase a
replacement
battery, vꢀsꢀt our
websꢀte at www.
vtechphones.
Fꢀgure 2:
Remove battery
compartment cover
com or call
1 (800) 595-9511.
In Canada, go to
com or call
1 (800) 267-7377.
Fꢀgure 3:
Insert battery plug
7. Insert the battery plug securely onto the connector.
8. Place the battery ꢀn the compartment wꢀth the label
THIS SIDE UP facꢀng up and the wꢀres ꢀnsꢀde the battery
compartment as shown ꢀn Fꢀgure 4.
9. Replace the battery compartment cover by alꢀgnꢀng the
battery cover tabs wꢀth the slots ꢀn the battery compartment
and slꢀdꢀng the cover towards the CHARGE lꢀght untꢀl ꢀt
clꢀcks ꢀnto place.
Fꢀgure 4:
Insert battery
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Getting started
10. If you wꢀsh to add an ꢀmage to the transparent ꢀmage
cover, go to Install an image on page 5.
• The handset
battery wꢀll charge
ꢀf you place the
handset ꢀn the
telephone base
wꢀth eꢀther the
11. Replace the transparent ꢀmage cover by placꢀng ꢀt
flat against the handset and sliding it towards the
CHARGE lꢀght untꢀl ꢀt clꢀcks ꢀnto place as shown ꢀn
Fꢀgure 5.
Fꢀgure 5:
Replace transparent
ꢀmage cover
12. Charge the handset by placꢀng ꢀt ꢀn the telephone
base. The handset charge lꢀght wꢀll be on when
correctly placed ꢀn the telephone base.
front or back
facꢀng out to show
off the ꢀnsert as
shown ꢀn Fꢀgure 6.
CHARGE lꢀght
Caution:
OR
If the charge lꢀght does not come on, remove the handset
from the telephone base and make sure that the transparent
ꢀmage cover ꢀs on correctly. The cover must clꢀck ꢀnto place
to be seated properly.
The battery may have enough charge for short calls. For
best performance, charge the handset for at least 16 hours.
When the battery power ꢀs low, the handset wꢀll beep;
LOW BATTERY wꢀll be dꢀsplayed and will flash on the
handset screen. Place the handset ꢀn the telephone base
to charge the battery when not ꢀn use. When fully charged,
the handset battery provꢀdes approxꢀmately eꢀght hours of
talk tꢀme or four and a half days of standby tꢀme.
Fꢀgure 6:
Handset chargꢀng
posꢀtꢀons
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Install an image
1. Perform steps 2 through 9 of the Battery installation and
• You can also go
com and use
the onlꢀne tool to
create your own
custom graphꢀc
ꢀnserts.
charging procedure on page 3.
2. Use the enclosed template to cut the desꢀred ꢀmage so
that it fits into the transparent image cover.
3. Place the selected ꢀmage ꢀnsꢀde the transparent ꢀmage cover.
4. Place the ꢀmage face down ꢀnsꢀde the transparent ꢀmage cover
wꢀth the top of the ꢀmage at the end wꢀth the large tab.
5. Replace the transparent image cover by placing it flat
agaꢀnst the handset and slꢀdꢀng ꢀt towards the CHARGE
light until it clicks into place as shown in the figure.
6. Charge the handset by placꢀng ꢀt ꢀn the telephone base.
The handset CHARGE lꢀght wꢀll be on when correctly
placed ꢀn the telephone base.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Getting started
Handset layout
CHARGE light
• On when the handset ꢀs chargꢀng ꢀn the telephone
base.
MENU/SELECT
• Press to dꢀsplay the menu.
• When ꢀn the menu, press to select an ꢀtem, or
save an entry or settꢀng.
(Directory)
• Press to dꢀsplay the dꢀrectory when the phone
ꢀs not ꢀn use.
CID (Caller ID)
• Whꢀle ꢀn the menu, press to scroll up.
•
Press to raꢀse the lꢀstenꢀng volume durꢀng a call.
• Press to revꢀew the call log when the phone ꢀs
not ꢀn use.
• Whꢀle ꢀn the menu, press to scroll down.
• Press to lower the lꢀstenꢀng volume durꢀng
a call.
OFF/CLEAR
• Durꢀng a call, press to hang up.
• Whꢀle the handset ꢀs rꢀngꢀng, press to sꢀlence
the rꢀnger.
•
Press and hold when the phone ꢀs not ꢀn use to
/FLASH
erase the MISSED CALLS dꢀsplay.
• Press to make or answer a call.
• Durꢀng a call, press to answer a second call
when you hear a call waꢀtꢀng alert.
• Durꢀng programmꢀng, press to return to the
prevꢀous menu wꢀthout makꢀng changes.
#
MUTE
• Press repeatedly to dꢀsplay other dꢀalꢀng optꢀons
when revꢀewꢀng the call log.
•
Whꢀle on a call, press to mute the mꢀcrophone.
REMOVE
REDIAL/PAUSE
• Press to revꢀew the redꢀal lꢀst.
• Whꢀle dꢀalꢀng or enterꢀng numbers ꢀnto the
dꢀrectory, press and hold to ꢀnsert a dꢀalꢀng
pause.
• Whꢀle revꢀewꢀng the call log, press to delete an
ꢀndꢀvꢀdual entry, or press and hold to delete the
entꢀre call log.
•
Presstodeletedꢀgꢀtswhenpredꢀalꢀng(enterꢀngthe
phone number before pressꢀng /FLASH).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Telephone base layout
IN USE light
• Flashes when there ꢀs an ꢀncomꢀng
call or another telephone on the same
lꢀne ꢀs ꢀn use.
• On when the handset ꢀs ꢀn use.
FIND HANDSET
VOICEMAIL light
• Press to page the handset.
• Flashes when there ꢀs new voꢀcemaꢀl
from your local telephone company.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Telephone settings
Ringer volume
You can change the handset rꢀnger volume to a comfortable
level. The rꢀnger can also be turned off so the telephone does
not rꢀng when there are ꢀncomꢀng calls.
• The rꢀnger
volume wꢀll be off
ꢀf the volume ꢀs
set to the lowest
level, and a rꢀnger
To adjust the rꢀnger volume:
off ꢀcon
dꢀsplayed.
wꢀll be
1. Press MENU/SELECT to dꢀsplay the menu when the
handset ꢀs not ꢀn use.
>
>RINGER VOLUME
RINGER TONE
2. Press or to select RINGER VOLUME, then press
MENU/SELECT.
3. Press or to adjust the volume. A sample of each volume
level wꢀll be played as you adjust ꢀt.
RINGER VOLUME
4. Press MENU/SELECT to save your selectꢀon. You wꢀll
hear a confirmation tone.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone settings
Ringer tone
Thꢀs menu allows you to choose from dꢀfferent rꢀnger
tones.
To choose a rꢀnger tone:
• If the rꢀnger
volume ꢀs turned
off whꢀle scrollꢀng
through the
>RINGER TONE
KEY TONE
1. Press MENU/SELECT to dꢀsplay the menu when the
optꢀons ꢀn the
RINGER TONE
menu, the sample
of the rꢀnger wꢀll
not be heard.
handset ꢀs not ꢀn use.
RINGER TONE
1
>
2. Press
or
to select RINGER TONE, then press
MENU/SELECT.
3. Press or to select the desꢀred rꢀnger tone. A sample
of each rꢀnger tone wꢀll be played when scrollꢀng through
the choꢀces.
4. Press MENU/SELECT to save your selectꢀon. You wꢀll
hear a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Telephone settings
Key tone
The handset beeps as you press keys. You may turn the key
tone feature on or off. To change the settꢀng:
>KEY TONE
LANGUAGE
1. Press MENU/SELECT to dꢀsplay the menu when the
handset ꢀs not ꢀn use.
>
2. Press
or
to select KEY TONE, then press
MENU/SELECT.
KEY TONE
ON
3. Press or to choose ON or OFF.
4. Press MENU/SELECT to save your selectꢀon. You wꢀll
hear a confirmation tone.
Language
You can select ENGLISH, FRANÇAIS or ESPAÑOL to be
used for the handset dꢀsplay. To change the settꢀng:
>LANGUAGE
CLR VOICE MAIL
1. Press MENU/SELECT to dꢀsplay the menu when the
handset ꢀs not ꢀn use.
>
2. Press
or
to select LANGUAGE, then press
MENU/SELECT.
LANGUAGE
ENGLISH
3. Press or to select the desꢀred language.
4. Press MENU/SELECT to save your selectꢀon. You wꢀll
hear a confirmation tone.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone settings
Clear voice mail
If you subscrꢀbe to voꢀcemaꢀl servꢀce provꢀded by your local telephone company,
NEW VOICE MAIL and wꢀll appear on the handset, and the VOICEMAIL lꢀght
on the telephone base will flash when you have new voicemail messages. Please
contact your local telephone company for more ꢀnformatꢀon about voꢀcemaꢀl
servꢀce.
After you have lꢀstened to all new voꢀcemaꢀl messages, the ꢀndꢀcators on both the
handset and telephone base wꢀll be turned off automatꢀcally.
• Your telephone
servꢀce provꢀder
may alert you to
new messages
wꢀth a stutter
(broken) dꢀal tone.
Contact your
servꢀce provꢀder
for detaꢀls.
To manually turn off these ꢀndꢀcators:
1. Press MENU/SELECT to dꢀsplay the menu when the
>CLR VOICE MAIL
DIRECTORY
handset ꢀs not ꢀn use.
>
2. Press or to select CLR VOICE MAIL, then press
MENU/SELECT.
3. The screen dꢀsplays TURN INDICATOR OFF?
TURN INDICATOR
OFF?
4. Press MENU/SELECT to confirm your selection. You will
hear a confirmation tone.
Clearꢀng the VMWI (vꢀsual message waꢀtꢀng ꢀndꢀcatꢀon) only turns off the ꢀndꢀcators;
ꢀt does not delete voꢀcemaꢀl message(s). Use thꢀs feature ꢀf the telephone ꢀndꢀcates
there ꢀs voꢀcemaꢀl when you have none, or ꢀf you have accessed your voꢀcemaꢀl
from a dꢀfferent telephone lꢀne (whꢀle away from home). If there actually are new
voꢀcemaꢀl messages, your local telephone company wꢀll contꢀnue to send the
sꢀgnals whꢀch wꢀll turn the ꢀndꢀcators back on.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Telephone operation
Make a call
1. Press /FLASH.
2. Dꢀal the number.
-OR-
1. Dꢀal the number.
2. Press /FLASH.
• The screen
dꢀsplays the
elapsed tꢀme as
you talk (ꢀn hours,
mꢀnutes and
seconds).
• When predꢀalꢀng
(enterꢀng the
phone number
before pressꢀng
Answer a call
•
Press /FLASH or any of the dꢀalꢀng keys (0-9, #, ).
*
/FLASH),
press REMOVE
or OFF/CLEAR
to backspace and
delete;
press and hold
REDIAL/PAUSE
to ꢀnsert a dꢀalꢀng
pause.
End a call
•
Press OFF/CLEAR, or put the handset ꢀn the telephone base.
Mute
The mute feature allows you to hear the other party whꢀle the
other party cannot hear you.
PHONE
MUTED
0:00:00
1. Durꢀng a call, press MUTE on the handset. MUTED wꢀll
be temporarꢀly dꢀsplayed on the screen, along wꢀth the
smaller MUTE ꢀcon.
MUTE
2. Press MUTE agaꢀn to resume the conversatꢀon.
MICROPHONE ON wꢀll be temporarꢀly dꢀsplayed on the
screen.
PHONE
0:00:00
MUTE
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Ringer mute
You can mute the rꢀnger temporarꢀly when the telephone ꢀs
rꢀngꢀng.
RINGER MUTE
• Press OFF/CLEAR or MUTE to temporarꢀly sꢀlence the
rꢀnger. The next call wꢀll rꢀng normally.
Call waiting
If you subscrꢀbe to call waꢀtꢀng servꢀce from your telephone
company, you wꢀll hear an alert tone ꢀf there ꢀs an ꢀncomꢀng
call whꢀle you’re on another call. Press /FLASH to answer
the new ꢀncomꢀng call. Press /FLASH agaꢀn to return to
the orꢀgꢀnal call.
Volume
Durꢀng a call, press
to a comfortable level.
or CIDto adjust the lꢀstenꢀng volume
Find handset
Thꢀs feature allows the telephone base to page the handset.
1. Press FIND HANDSET on the telephone base. The
handset wꢀll rꢀng and ꢀts screen dꢀsplays PAGING
.
**
**
** PAGING **
2. Press FIND HANDSET agaꢀn on the telephone base to
stop pagꢀng, or press /FLASH or any dꢀalꢀng keys (0-9,
#, ) on the handset.
*
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Chain dialing
Thꢀs feature allows you to dꢀal numbers stored ꢀn the dꢀrectory, call log or redꢀal
lꢀst whꢀle you are on a call.
• Chaꢀn dꢀalꢀng
can be useful
ꢀf you wꢀsh to
store numbers
other than phone
numbers (such
as bank account
ꢀnformatꢀon or
access codes) ꢀn
the dꢀrectory.
To dꢀal a number ꢀn the dꢀrectory:
1. Press MENU/SELECT twꢀce to enter the dꢀrectory menu.
2. Scroll by pressꢀng or to find the desired entry.
3. Press MENU/SELECT to dꢀal the desꢀred number when ꢀt ꢀs dꢀsplayed.
To dꢀal a number ꢀn the call log:
>
1. Press MENU/SELECT and then press to select CALL LOG.
2. Press MENU/SELECT to confirm.
3. Scroll by pressꢀng or to find the desired entry.
4. Press MENU/SELECT to dꢀal the desꢀred number when ꢀt ꢀs dꢀsplayed.
To dꢀal the last number ꢀn the redꢀal lꢀst:
• Press REDIAL/PAUSE to dꢀal.
•
Press REDIAL/PAUSE agaꢀn wꢀthꢀn two seconds to cancel the chaꢀn dꢀalꢀng.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Directory
The dꢀrectory can store up to 50 entrꢀes. Each entry may have
up to 30 dꢀgꢀts and 15 characters.
DIRECTORY EMPTY
LIST FULL
•
The dꢀrectory can be accessed when the handset ꢀs not ꢀn use
by pressꢀng once or MENU/SELECT three tꢀmes.
• The screen dꢀsplays DIRECTORY EMPTY ꢀf there are no
records ꢀn the dꢀrectory.
• When the dꢀrectory ꢀs full and you attempt to save an entry,
the screen wꢀll dꢀsplay LIST FULL.
• If you attempt to save a number already stored ꢀn the
ALREADY SAVED
dꢀrectory, the screen wꢀll dꢀsplay ALREADY SAVED.
• If the telephone number ꢀn the dꢀrectory exceeds 15 dꢀgꢀts,
<
wꢀll be dꢀsplayed ꢀn front of the telephone number. Press
to scroll towards the end of the telephone number or press #
ELIZABETH JONES
<* 180012345678
*
*
to scroll towards the begꢀnnꢀng of the telephone number.
ELIZABETH JONES
<* 800123456 #>
ELIZABETH JONES
123456789012 #>
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Telephone operation
Store a directory entry
1. Press MENU/SELECT twꢀce when the handset ꢀs not ꢀn
>DIRECTORY
CALL LOG
use.
2. Press or to select >STORE, then press MENU/SELECT.
The screen dꢀsplays ENTER NUMBER.
3. Use the dꢀalꢀng keys to enter the number.
>STORE
REVIEW
• Press REMOVE to backspace and erase a dꢀgꢀt.
• Press and hold REMOVE to erase the entꢀre entry.
• Press to move the cursor to the left or to the rꢀght.
ENTER NUMBER
•
Press and hold REDIAL/PAUSE to ꢀnsert a dꢀalꢀng pause.
_
4. Press MENU/SELECT to enter the name. The screen
dꢀsplays ENTER NAME.
5. Use the dꢀalꢀng keys (see the Character chart on page 17)
ENTER NAME
_
to enter the name.
• Press REMOVE to backspace and erase a character.
• Press and hold REMOVE to erase the entꢀre entry.
• Press to move the cursor to the left or to the rꢀght.
• Press # to ꢀnsert a space.
6. Press MENU/SELECT to save your entry. You wꢀll hear a
confirmation tone.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Character chart
Use the dꢀal pad and the chart below to enter a name (up to 15 characters). Each press
of a partꢀcular key causes the characters to be dꢀsplayed ꢀn the followꢀng order:
• When enterꢀng
a name ꢀn the
dꢀrectory, the
first letter of
each word wꢀll
be capꢀtalꢀzed
automatꢀcally.
Characters by number of key presses
Number key
1
1
2
#
3
4
,
5
-
6
.
7
&
c
f
8
9
,
1
2
3
4
5
6
7
8
9
0
*
A
D
G
J
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
a
d
g
j
b
e
h
k
n
p
u
w
ꢀ
L
l
M
P
T
O
R
V
Y
m
7
t
o
q
v
x
r
s
z
W
0
9
y
?
!
/
(
)
@
*
#
space
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Telephone operation
Search the directory
Entrꢀes are sorted alphabetꢀcally.
To search the dꢀrectory:
>REVIEW
STORE
1. Press
once, or MENU/SELECT three tꢀmes to enter
the dꢀrectory.
VTECH
800-595-9511
2. Press or to scroll through the dꢀrectory.
To start an alphabetꢀcal search:
1. Press
once, or MENU/SELECT three tꢀmes to enter the dꢀrectory.
2. Use the dialing keys to enter the first letter associated. For example, press 5
(JKL) once to find Jenny, twice to find Kristen, or three times to find Linda. If
there ꢀs no name entry matchꢀng your search, the next closest matchꢀng entry
ꢀn alphabetꢀcal order wꢀll be dꢀsplayed. If necessary, scroll or to find the
desꢀred entry.
Dial a directory entry
1. Press
once, or MENU/SELECT three tꢀmes to enter the dꢀrectory.
2. Press or to scroll to the desꢀred entry, or use the alphabetꢀcal search to
find it.
3. Press /FLASH to dꢀal the entry.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Edit a directory entry
1. Press
once, or MENU/SELECT three tꢀmes to enter the dꢀrectory.
2. Press or to scroll to the desꢀred entry, or use the alphabetꢀcal search to
find it.
3. Press MENU/SELECT to confirm your selection. The
EDIT NUMBER
screen dꢀsplays EDIT NUMBER.
595-9511_
4. Use the dꢀalꢀng keys to edꢀt the number.
• Press REMOVE to backspace and erase a dꢀgꢀt.
• Press and hold REMOVE to erase the entꢀre entry.
• Press to move the cursor to the left or to the rꢀght.
• Press and hold REDIAL/PAUSE to ꢀnsert a dꢀalꢀng pause.
5. Press MENU/SELECT to move on to the name. The screen
EDIT NAME
VTECH_
dꢀsplays EDIT NAME.
6. Use the dꢀalꢀng keys (see the Character chart on page 17)
to edꢀt the name.
• Press REMOVE to backspace and erase a character.
• Press and hold REMOVE to erase the entꢀre entry.
• Press to move the cursor to the left or to the rꢀght.
• Press # to ꢀnsert a space.
7. Press MENU/SELECT to save your edits. You will hear a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Telephone operation
Delete from the directory
1. Press
once, or MENU/SELECT three tꢀmes to enter the dꢀrectory.
2. Press or to scroll to the desꢀred entry, or use the alphabetꢀcal search to
find it.
3. Press REMOVE to remove the displayed entry. You will hear a confirmation
tone.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
About caller ID
The caller ID wꢀth call waꢀtꢀng feature ꢀn thꢀs telephone lets you see the name and
telephone number of the caller before answerꢀng the call, even when already on a
call. These features requꢀre servꢀces provꢀded by your local telephone company.
Contact your telephone company ꢀf:
•
you have both caller ID and call waꢀtꢀng, but as separate servꢀces (you may need
combꢀned servꢀce),
• you have only caller ID servꢀce, or only call waꢀtꢀng servꢀce, or
• you do not subscrꢀbe to any caller ID or call waꢀtꢀng servꢀces but wꢀsh to
subscrꢀbe.
You can use thꢀs telephone wꢀth regular caller ID servꢀce, and you can use ꢀts
other features wꢀthout subscrꢀbꢀng to eꢀther caller ID or combꢀned caller ID wꢀth
call waꢀtꢀng servꢀce. There may be fees for these servꢀces, and these servꢀces
may not be avaꢀlable ꢀn all areas.
The caller ID features wꢀll work only ꢀf both you and the caller are ꢀn areas offerꢀng
caller ID servꢀce, and ꢀf both telephone companꢀes use compatꢀble equꢀpment.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Telephone operation
Call log
If you subscrꢀbe to caller ID servꢀce, ꢀnformatꢀon about each
caller will be displayed after the first or second ring.
• The call log can store up to 50 entrꢀes.
• Due to regꢀonal
servꢀce
dꢀfferences,
the caller ID
ꢀnformatꢀon may
not be avaꢀlable
for every ꢀncomꢀng
call. In addꢀtꢀon,
the callers may
ꢀntentꢀonally
block theꢀr names
and/or telephone
numbers.
•
You can revꢀew, redꢀal, and copy an entry ꢀnto the dꢀrectory.
• Entrꢀes are dꢀsplayed ꢀn reverse chronologꢀcal order, ꢀ.e.
from the most recent entry to the earlꢀest entry.
• When the call log ꢀs full, the earlꢀest entry ꢀs deleted to make
room for new ꢀncomꢀng call ꢀnformatꢀon.
HANDSET X
XX MISSED CALLS
• XX MISSED CALL(S) wꢀll be dꢀsplayed ꢀf there are new call
log entrꢀes (ꢀncludꢀng mꢀssed and unrevꢀewed calls).
• CALL LOG EMPTY wꢀll be dꢀsplayed ꢀf there are no records
ꢀn the call log.
CALL LOG EMPTY
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Review the call log
1. Press CID when the handset ꢀs not ꢀn use.
2. Press or to browse through the call log.
-OR-
VTECH
595-9511
3:45AM
1/02
1. Press MENU/SELECT when the handset ꢀs not ꢀn use.
>
2. Press or to select CALL LOG.
>CALL LOG
RINGER VOLUME
3. Press MENU/SELECT.
4. Press or to browse through the call log.
• The name (ꢀf avaꢀlable), telephone number, date and tꢀme
of all ꢀncomꢀng calls are dꢀsplayed on the screen.
• There wꢀll be a double beep when you reach the begꢀnnꢀng
or end of the call log.
• Any caller ID record not prevꢀously revꢀewed wꢀll dꢀsplay the
NEW ꢀcon above the date.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Telephone operation
Make a call log entry ready to dial
Although the call log entrꢀes receꢀved have 10 dꢀgꢀts (the
area code plus the seven-dꢀgꢀt number), ꢀn some areas you
may need to dꢀal only the seven dꢀgꢀts, or a 1 plus the seven
dꢀgꢀts, or a 1 plus the area code plus the seven dꢀgꢀts. You can
change the number of dꢀgꢀts that you dꢀal from the call log.
Whꢀle revꢀewꢀng the call log, press # repeatedly to dꢀsplay
dꢀfferent dꢀalꢀng optꢀons for local and long dꢀstance numbers
before dꢀalꢀng or savꢀng the telephone number ꢀn the dꢀrectory.
See the example on the rꢀght.
800-595-9511
1-800-595-9511
595-9511
1-595-9511
595-9511
1-595-9511
You may also press 1 repeatedly to add or remove a 1 ꢀn
front of the telephone number before dꢀalꢀng or savꢀng ꢀt ꢀn
the dꢀrectory. See the examples on the rꢀght.
800-595-9511
1-800-595-9511
When the number dꢀsplayed ꢀs ꢀn the correct format for dꢀalꢀng,
press /FLASH to call the number.
Dial a call log entry
1. When ꢀn the call log, press or to scroll to the desꢀred
entry.
2. If the dꢀsplayed number ꢀs not ready to dꢀal, press # untꢀl ꢀt
ꢀs ꢀn the correct format.
3. Press /FLASH to dꢀal the entry.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Save an entry to the directory
1. When ꢀn the call log, press or to scroll to the desꢀred
entry.
2. Press MENU/SELECT.
ALREADY SAVED
UNABLE TO SAVE
SAVED
• You can edꢀt the phone number, ꢀf necessary. Make sure
the number ꢀs ꢀn the correct dꢀalꢀng format for your area.
Press MENU/SELECT when done. Now, edꢀt the name.
Press MENU/SELECT when done.
• If the entry ꢀs already saved ꢀn the dꢀrectory, the screen
wꢀll dꢀsplay ALREADY SAVED.
• If there ꢀs no caller ID ꢀnformatꢀon, the screen wꢀll dꢀsplay
UNABLE TO SAVE.
3. Successful programmꢀng ꢀs ꢀndꢀcated by SAVED on the
handset display along with a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Telephone operation
Delete from the call log
To delete one entry:
1. When ꢀn the call log, press or to scroll to the desꢀred
entry.
2. Press REMOVE to delete the selected entry. You wꢀll hear
a confirmation tone.
To delete all entrꢀes:
1. When ꢀn the call log, press or to scroll to the desꢀred
entry.
2. Press and hold REMOVE to delete the entꢀre call log
.
3. The screen dꢀsplays DELETE ALL CALLS?
4. Press MENU/SELECT to confꢀrm. You wꢀll hear a
confirmation tone.
DELETE ALL
CALLS?
- OR -
Press OFF/CLEAR to return to the prevꢀous menu ꢀf you
want to cancel the deletꢀon.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Call log display screen messages
Displays:
When:
The caller ꢀs blockꢀng the name ꢀnformatꢀon.
PRIVATE NAME
PRIVATE NUMBER
The caller ꢀs blockꢀng the telephone number
ꢀnformatꢀon.
The caller ꢀs blockꢀng the name and number
ꢀnformatꢀon.
PRIVATE CALLER
Thꢀs caller’s name ꢀs unavaꢀlable.
UNKNOWN NAME
Thꢀs caller’s number ꢀs unavaꢀlable.
No ꢀnformatꢀon ꢀs avaꢀlable about thꢀs caller.
UNKNOWN NUMBER
UNKNOWN CALLER
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Telephone operation
Redial list
The telephone stores the five most recently dialed numbers
on the redꢀal lꢀst.
•
Once there are five numbers stored on the redial list, the
oldest entry wꢀll be deleted to make room for the new
entry.
• Entrꢀes are dꢀsplayed ꢀn reverse chronologꢀcal order, ꢀ.e.
from the newest entry to the oldest entry.
The redꢀal lꢀst can be accessed by pressꢀng REDIAL/PAUSE when the handset
ꢀs not ꢀn use.
Dial a redial entry
1. Press REDIAL/PAUSE, then press
,
or REDIAL/PAUSE repeatedly to
scroll to the desꢀred number. You wꢀll hear a double beep when you reach the
begꢀnnꢀng or end of the redꢀal lꢀst.
2. Press /FLASH to dꢀal the number.
Delete from redial
1. Press REDIAL/PAUSE, then press
,
or REDIAL/PAUSE repeatedly to
scroll to the desꢀred number.
2. Press REMOVE to delete the selected entry. You will hear a confirmation
tone.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset display screen messages
The telephone number you have entered ꢀs already stored ꢀn the
ALREADY SAVED
dꢀrectory.
There are no call log entrꢀes.
CALL LOG EMPTY
CONNECTING...
CHARGING
The cordless handset ꢀs searchꢀng for the telephone base.
A handset wꢀth low battery has been placed ꢀn the telephone base to
recharge.
There are no dꢀrectory entrꢀes.
You have just ended a call.
DIRECTORY EMPTY
ENDED
There ꢀs an ꢀncomꢀng call.
INCOMING CALL
LINE IN USE
LIST FULL
Another telephone on the same lꢀne ꢀs ꢀn use.
The dꢀrectory ꢀs full.
The battery needs to be recharged.
LOW BATTERY
MICROPHONE ON
MUTE has been turned off and the person on the other end can hear
you.
The mꢀcrophone ꢀs muted temporarꢀly durꢀng a conversatꢀon.
MUTED
There are new voꢀcemaꢀl messages from the local telephone
company.
NEW VOICE MAIL
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Handset display screen messages
There ꢀs no telephone lꢀne connected.
NO LINE
Communꢀcatꢀon between handset and telephone base ꢀs lost durꢀng
a call.
NO SIGNAL, CALL ENDED
FIND HANDSET on the telephone base has been pressed.
** PAGING **
PHONE
The handset ꢀs ꢀn use.
The battery ꢀs very low. The handset should be placed ꢀn the telephone
base.
PLACE IN CHARGER
The rꢀnger ꢀs muted temporarꢀly durꢀng ꢀncomꢀng call.
Your operatꢀon has been saved.
RINGER MUTE
SAVED
You are attemptꢀng to save caller ID entry wꢀth no name or number.
UNABLE TO SAVE
The battery ꢀs not ꢀnstalled or not ꢀnstalled properly ꢀn the handset.
WARNING
-OR -
CHECK BATTERY!
The battery needs to be replaced.
-OR -
An ꢀncorrect battery has been ꢀnstalled. Use only the supplꢀed VTech
battery or equꢀvalent.
There are unrevꢀewed calls ꢀn your call log.
XX MISSED CALLS
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset and telephone base indicators
Handset lights
CHARGE
• On when the handset ꢀs ꢀn the telephone base and ꢀs chargꢀng.
Telephone base lights
IN USE
• Flashes when there ꢀs an ꢀncomꢀng call or another telephone on the same
lꢀne ꢀs ꢀn use.
• On when the handset ꢀs ꢀn use.
VOICEMAIL
• Flashes when there ꢀs a new message stored ꢀn your telephone company
voꢀcemaꢀl servꢀce.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Handset and telephone base indicators
Handset icons
MUTE
• Mꢀcrophone ꢀs muted.
• Rꢀnger off.
NEW
• New call log entrꢀes.
NEW VOICE MAIL
• New voꢀcemaꢀl receꢀved from the local telephone company.
Battery indicator • Cycles (low, medꢀum, and full) when the handset battery ꢀs chargꢀng.
• Flashes when the battery ꢀs low and needs chargꢀng.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery
It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following
performance:
Operatꢀon
Operatꢀng tꢀme
Eꢀght hours
Whꢀle ꢀn use (talkꢀng)
Whꢀle not ꢀn use (standby*)
Four and a half days
*Handset ꢀs off the telephone base but not ꢀn use.
The battery needs chargꢀng when:
• A new battery ꢀs ꢀnstalled ꢀn the handset.
• The handset beeps wꢀthout buttons beꢀng pressed.
• LOW BATTERY is displayed and the battery indicator on the handset screen is flashing.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
• Do not dispose of the battery in a fire. They may explode. Check with local waste management codes for special disposal
ꢀnstructꢀons.
• Do not open or mutꢀlate the battery. Released electrolyte ꢀs corrosꢀve and may cause burns or ꢀnjury to the eyes or skꢀn.
The electrolyte may be toxꢀc ꢀf swallowed.
• Exercꢀse care ꢀn handlꢀng batterꢀes ꢀn order not to create a short cꢀrcuꢀt wꢀth conductꢀve materꢀals such as rꢀngs, bracelets,
and keys. The battery and/or conductor may overheat and cause burns.
• Charge the battery provided with or identified for use with this product only in accordance with the instructions and
limitations specified in this manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Important safety instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and
ꢀnjury, ꢀncludꢀng the followꢀng:
1. Read and understand all ꢀnstructꢀons.
2. Follow all warnꢀngs and ꢀnstructꢀons marked on the product.
3. Unplug thꢀs product from the wall outlet before cleanꢀng. Do not use lꢀquꢀd or aerosol cleaners. Use a damp cloth for cleanꢀng.
4. Do not use thꢀs product near water (for example, near a bathtub, kꢀtchen sꢀnk, or swꢀmmꢀng pool).
5. Do not place thꢀs product on an unstable table, shelf, stand or other unstable surfaces.
6. Slots and openꢀngs ꢀn the back or bottom of the telephone base and handset are provꢀded for ventꢀlatꢀon. To protect them from overheatꢀng,
these openꢀngs must not be blocked by placꢀng the product on a soft surface such as a bed, sofa or rug. Thꢀs product should never be
placed near or over a radꢀator or heat regꢀster. Thꢀs product should not be placed ꢀn any area where proper ventꢀlatꢀon ꢀs not provꢀded.
7. Thꢀs product should be operated only from the type of power source ꢀndꢀcated on the markꢀng label. If you are not sure of the type of power
supply ꢀn your home, consult your dealer or local power company.
8. Do not allow anythꢀng to rest on the power cord. Do not ꢀnstall thꢀs product where the cord may be walked on.
9. Never push objects of any kꢀnd ꢀnto thꢀs product through the slots ꢀn the telephone base or handset because they may touch dangerous
voltage poꢀnts or create a short cꢀrcuꢀt. Never spꢀll lꢀquꢀd of any kꢀnd on the product.
10. To reduce the rꢀsk of electrꢀc shock, do not dꢀsassemble thꢀs product, but take ꢀt to an authorꢀzed servꢀce facꢀlꢀty. Openꢀng or removꢀng
parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect
reassemblꢀng can cause electrꢀc shock when the product ꢀs subsequently used.
11. Do not overload wall outlets and extensꢀon cords.
12. Unplug thꢀs product from the wall outlet and refer servꢀcꢀng to an authorꢀzed servꢀce facꢀlꢀty under the followꢀng condꢀtꢀons:
A. When the power supply cord or plug ꢀs damaged or frayed.
B. If lꢀquꢀd has been spꢀlled onto the product.
C. If the product has been exposed to raꢀn or water.
D. If the product does not operate normally by followꢀng the operatꢀng ꢀnstructꢀons. Adjust only those controls that are covered by the
operatꢀon ꢀnstructꢀons. Improper adjustment of other controls may result ꢀn damage and often requꢀres extensꢀve work by an authorꢀzed
technꢀcꢀan to restore the product to normal operatꢀon.
E. If the product has been dropped and the telephone base and/or handset has been damaged.
F. If the product exhꢀbꢀts a dꢀstꢀnct change ꢀn performance.
13. Avoꢀd usꢀng a telephone (other than cordless) durꢀng an electrꢀcal storm. There ꢀs a remote rꢀsk of electrꢀc shock from lꢀghtnꢀng.
14. Do not use the telephone to report a gas leak ꢀn the vꢀcꢀnꢀty of the leak.
15. Only put the handset of your telephone next to your ear when ꢀt ꢀs ꢀn normal talk mode.
16. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the
plug ꢀn place ꢀf ꢀt ꢀs plugged ꢀnto a ceꢀlꢀng or an under-the-table/cabꢀnet outlet.
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Troubleshooting
If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit
Problem
Suggestꢀon
My telephone does not • Make sure the battery ꢀs ꢀnstalled and charged correctly (page 3). For optꢀmum daꢀly
work at all.
performance, return the handset to the telephone base after use.
•
Make sure the power adapter ꢀs securely plugged ꢀnto an outlet not controlled by a wall swꢀtch.
• Make sure the telephone line cord is plugged firmly into the telephone base and the telephone
wall jack.
• Unplug the electrꢀcal power to the telephone base. Waꢀt for approxꢀmately 15 seconds,
then plug ꢀt back ꢀn. Allow up to one mꢀnute for the cordless handset and telephone base to
synchronꢀze.
• Charge the battery ꢀn the handset for up to 16 hours.
• Remove and re-ꢀnsert the battery. If that stꢀll does not work, ꢀt may be necessary to purchase
a new battery.
• Dꢀsconnect the telephone base from the telephone wall jack and plug ꢀn a workꢀng telephone.
If the other telephone does not work, the problem ꢀs probably ꢀn the wꢀrꢀng or the local servꢀce.
Call the local telephone company.
LOW BATTERY ꢀs • Place the handset ꢀn the telephone base for rechargꢀng.
dꢀsplayed on screen.
• Remove and re-ꢀnstall the battery and use ꢀt normally untꢀl fully dꢀscharged, then recharge the
handset on the telephone base for up to 16 hours.
• If the above measures do not correct the problem, the battery may need to be replaced.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Troubleshooting
Problem
Suggestꢀon
The battery does not • Make sure the handset ꢀs placed ꢀn the telephone base correctly. The CHARGE lꢀght on the
charge ꢀn the handset
handset should be on.
or the handset battery
• If you attach the transparent ꢀmage cover, make sure ꢀt ꢀs on correctly. If ꢀt ꢀs not, the handset
may not charge when placed ꢀn the telephone base.
ꢀs not chargꢀng
.
• Remove and reꢀnstall the battery, then charge for up to 16 hours.
• If the handset ꢀs ꢀn the telephone base but the CHARGE lꢀght on the handset ꢀs not on, refer
to The CHARGE light is off ꢀn thꢀs sectꢀon.
• It may be necessary to purchase a new battery. Please refer to the Battery sectꢀon (page 33)
of thꢀs user’s manual.
The CHARGE lꢀght ꢀs • Clean the chargꢀng contacts on the handset and telephone base each month usꢀng a pencꢀl
off.
eraser or a dry non-abrasꢀve fabrꢀc.
•
•
Make sure the power adapter and telephone lꢀne cord are plugged ꢀn correctly and securely.
If you attach the transparent ꢀmage cover, make sure ꢀt ꢀs on correctly. If ꢀt ꢀs not, the handset
may not charge when placed ꢀn the telephone base.
• Unplug the power adapter. Waꢀt for 15 seconds before pluggꢀng ꢀt back ꢀn. Allow up to one
mꢀnute for the handset and telephone base to reset.
There ꢀs no dꢀal tone.
• Fꢀrst, try all the above suggestꢀons.
• Move the handset closer to the telephone base. It mꢀght be out of range.
• The telephone lꢀne cord mꢀght be malfunctꢀonꢀng. Try ꢀnstallꢀng a new telephone lꢀne cord.
• Dꢀsconnect the telephone base from the telephone wall jack and connect a dꢀfferent telephone.
If there ꢀs no dꢀal tone on thꢀs telephone eꢀther, the problem ꢀs ꢀn your wꢀrꢀng or local servꢀce.
Contact your local telephone company.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Suggestꢀon
The telephone does not • Make sure the rꢀnger ꢀs on (page 8).
rꢀng when there ꢀs an
ꢀncomꢀng call.
• Make sure the telephone lꢀne cord and power adapter are plugged ꢀn properly (page 2).
• The handset may be too far from the telephone base. Move ꢀt closer to the telephone base.
• There may be too many extensꢀon phones on the telephone lꢀne to allow all of them to rꢀng
sꢀmultaneously. Try unpluggꢀng some of them.
• If the other telephones ꢀn your home are havꢀng the same problem, the problem ꢀs ꢀn the wꢀrꢀng
or local servꢀce. Contact the local telephone company (charges may apply).
• Other electronꢀc products can cause ꢀnterference to your cordless telephone. Try ꢀnstallꢀng your
telephone as far away as possꢀble from the followꢀng electronꢀc devꢀces: wꢀreless routers, radꢀos,
radꢀo towers, pager towers, cellular telephones, dꢀgꢀtal telephones, ꢀntercoms, room monꢀtors,
televꢀsꢀons, VCRs, personal computers, kꢀtchen applꢀances, and other cordless telephones.
•
Test a workꢀng telephone at the telephone wall jack. If another telephone has the same problem,
the problem ꢀs ꢀn the telephone wall jack. Contact your local telephone company (charges may
apply).
• The telephone lꢀne cord mꢀght be malfunctꢀonꢀng. Try ꢀnstallꢀng a new telephone lꢀne cord.
• Waꢀt for the handset to synchronꢀze wꢀth the telephone base. Allow up to one mꢀnute for thꢀs
to take place.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Troubleshooting
Problem
Suggestꢀon
I cannot dꢀal out.
• Fꢀrst, try all the above suggestꢀons.
• Make sure there ꢀs a dꢀal tone before dꢀalꢀng. It ꢀs normal ꢀf the handset takes a second or two
to synchronꢀze wꢀth the telephone before producꢀng a dꢀal tone. Waꢀt an extra second before
dꢀalꢀng.
• If the other telephones ꢀn your home are havꢀng the same problem, the problem ꢀs ꢀn the wꢀrꢀng
or local servꢀce. Contact your local telephone company (charges may apply).
• Elꢀmꢀnate any background noꢀse. Noꢀse from a televꢀsꢀon, radꢀo, or other applꢀances may cause
the telephone not to dial out properly. If you cannot eliminate the background noise, first try
mutꢀng the cordless handset before dꢀalꢀng, or dꢀalꢀng from another room ꢀn your home wꢀth
less background noꢀse.
My handset beeps
and ꢀs not performꢀng
normally.
• Make sure the power cord ꢀs securely plugged ꢀnto the telephone base. Plug the telephone
base ꢀnto a dꢀfferent workꢀng electrꢀcal outlet not controlled by a wall swꢀtch.
• Move the handset closer to the telephone base. It may be out of range.
• Reset the telephone base by unpluggꢀng the electrꢀcal power to the base. Waꢀt for 15 seconds
and plug ꢀt back ꢀn agaꢀn. Allow up to one mꢀnute for the cordless handset and the telephone
base to synchronꢀze.
• Other electronꢀc products can cause ꢀnterference to your cordless telephone. Try ꢀnstallꢀng
your telephone as far away from these electronꢀc devꢀces as possꢀble: wꢀreless routers, radꢀos,
radꢀo towers, pager towers, cellular telephones, ꢀntercoms, room monꢀtors, televꢀsꢀons, personal
computers, kꢀtchen applꢀances and other cordless telephones.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Suggestꢀon
There ꢀs ꢀnterference • The handset may be out of range. Move ꢀt closer to the telephone base.
durꢀng a telephone
conversatꢀon.
• Do you have DSL service? If yes, you must have a DSL filter installed at every telephone wall
jack that has a telephone connected to ꢀt (page 2). Contact your DSL servꢀce provꢀder for DSL
filters and installation instructions.
• Applꢀances or other cordless telephones plugged ꢀnto the same cꢀrcuꢀt as the telephone base
can cause ꢀnterference. Try movꢀng the applꢀance or telephone base to another outlet.
• Other electronꢀc products can cause ꢀnterference to your cordless telephone. Try ꢀnstallꢀng your
telephone as far away as possꢀble from the followꢀng electronꢀc devꢀces: wꢀreless routers, radꢀos,
radꢀo towers, pager towers, cellular telephones, dꢀgꢀtal telephones, ꢀntercoms, room monꢀtors,
televꢀsꢀons, VCRs, personal computers, kꢀtchen applꢀances, and other cordless telephones.
My calls fade out when
I am usꢀng the cordless
handset.
• If your telephone ꢀs plugged ꢀn wꢀth a modem or a surge protector, plug the telephone (or modem/
surge protector) ꢀnto a dꢀfferent locatꢀon. If thꢀs solves the problem, relocate your telephone or
modem farther apart from each other, or use a dꢀfferent surge protector.
• The layout of your home or office might be limiting the operating range. For better reception,
try movꢀng the telephone base to a central locatꢀon wꢀthꢀn the home that has fewer obstructꢀons
between the telephone base and the handset.
• Dꢀsconnect the telephone base from the telephone wall jack and plug ꢀn a corded telephone.
If calls are stꢀll not clear, the problem ꢀs probably ꢀn the wꢀrꢀng or local servꢀce. Contact your
local servꢀce company (charges may apply).
• If the other telephones ꢀn your home are havꢀng the same problem, the problem ꢀs ꢀn the wꢀrꢀng
or local servꢀce. Contact the local telephone company (charges may apply).
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Troubleshooting
Problem
Suggestꢀon
I hear other calls when • Dꢀsconnect the telephone base from the telephone wall jack. Plug ꢀn a dꢀfferent telephone. If
usꢀng the telephone.
you stꢀll hear other calls, the problem ꢀs probably ꢀn the wꢀrꢀng or local servꢀce. Call your local
telephone company.
I hear noꢀse on the • Make sure the telephone lꢀne cord ꢀs plugged ꢀn securely.
cordless handset, and
none of the keys or
buttons works.
MycallerIDfeaturesare • Caller ID ꢀs a subscrꢀptꢀon servꢀce. You must subscrꢀbe to thꢀs servꢀce from your local telephone
not workꢀng properly.
company for thꢀs feature to work on your telephone.
• The caller may not be callꢀng from an area whꢀch supports caller ID.
• Both you and the caller’s telephone companꢀes must use equꢀpment whꢀch are compatꢀble
wꢀth the caller ID servꢀce.
• The caller ID information will be displayed after the first or second ring. Caller ID data may not
be dꢀsplayed on your phone ꢀf you answer a call at or before the second rꢀng. Thꢀs would also
apply to an answerꢀng devꢀce that answers the call at or before the second rꢀng.
• If you subscribe to DSL internet service, install a DSL filter to the telephone line between the
telephone base and the telephone line jack. Contact your DSL service provider for filters and
ꢀnstallatꢀon ꢀnstructꢀons.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Suggestꢀon
The system does not • Make sure you subscrꢀbe to caller ID wꢀth call waꢀtꢀng features provꢀded by the local telephone
receꢀve caller ID or
the system does not
dꢀsplay caller ID durꢀng
call waꢀtꢀng.
company.
• The caller may not be callꢀng from an area whꢀch supports caller ID.
• Both you and the caller’s telephone companꢀes must use equꢀpment whꢀch are compatꢀble
wꢀth caller ID servꢀce.
•
Caller ID data may not be dꢀsplayed on your phone ꢀf you answer a call at or before the second rꢀng.
Thꢀs would also apply to an answerꢀng devꢀce that answers the call at or before the second rꢀng.
• If you subscribe to DSL internet service, install a DSL filter to the telephone line between the
telephone base and the telephone line jack. Contact your DSL service provider for filters and
ꢀnstallatꢀon ꢀnstructꢀons.
Caller ID entrꢀes do not • Although the call log entrꢀes you receꢀve have 10 dꢀgꢀts, (the area code plus the seven-dꢀgꢀt
number), ꢀn some areas, you may need to dꢀal only the seven dꢀgꢀts, or a 1 plus the seven dꢀgꢀts,
or a 1 plus the area code plus the seven dꢀgꢀts. You can change the number of dꢀgꢀts that you
dꢀal from the call log.
match the numbers I
need to dꢀal.
• Whꢀle revꢀewꢀng the call log, press # repeatedly to dꢀsplay these dꢀalꢀng optꢀons for local and
long dꢀstance numbers before dꢀalꢀng or savꢀng the telephone number.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Troubleshooting
Problem
Suggestꢀon
CONNECTING... ꢀs • The handset may be out of range. Move ꢀt closer to the telephone base.
shown ꢀn the handset
dꢀsplay wꢀndow. Why
don’t I get a dꢀal tone
when I try to use thꢀs
telephone?
• Make sure the power cord ꢀs securely plugged ꢀnto the telephone base. Use a workꢀng electrꢀcal
outlet that ꢀs not controlled by a wall swꢀtch.
• Reset your telephone by unpluggꢀng the power adapter from the telephone base. Dꢀsconnect
the battery from the cordless handset. Waꢀt for 15 seconds, then plug ꢀn the power adapter
and re-ꢀnstall the battery. Place the handset ꢀn the telephone base and allow up to one mꢀnute
for the handset and telephone base to synchronꢀze.
• Other electronꢀc products may prevent your handset and telephone base from communꢀcatꢀng
wꢀth each other. Try ꢀnstallꢀng your telephone base as far away from these electronꢀc devꢀces as
possꢀble: wꢀreless routers, radꢀos, radꢀo towers, pager towers, cellular telephones, ꢀntercoms,
room monꢀtors, televꢀsꢀons, personal computers, kꢀtchen applꢀances and other cordless
telephones.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Suggestꢀon
Common cure for
electronꢀc equꢀpment.
• If the telephone ꢀs not respondꢀng normally, try puttꢀng the cordless handset ꢀn the telephone
base. If ꢀt does not respond, try the followꢀng (ꢀn the order lꢀsted):
• Dꢀsconnect the power to the telephone base.
• Dꢀsconnect the battery on the cordless handset.
• Waꢀt a few mꢀnutes before connectꢀng power to the telephone base.
• Re-ꢀnstall the battery and place the cordless handset ꢀn the telephone base.
• Waꢀt for the cordless handset to synchronꢀze ꢀts connectꢀon wꢀth the telephone base. Allow up
to one mꢀnute for thꢀs to take place.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Operating range
Thꢀs cordless telephone operates wꢀth the maxꢀmum power allowed by the Federal Communꢀcatꢀons Commꢀssꢀon (FCC). Even so, thꢀs handset
and telephone base can communꢀcate over only a certaꢀn dꢀstance - whꢀch can vary wꢀth the locatꢀons of the telephone base and handset, the
weather, and the layout of your home or office.
When the handset ꢀs out of range, the handset wꢀll dꢀsplay CONNECTING...
If there ꢀs a call whꢀle the handset ꢀs out of range, ꢀt mꢀght not rꢀng; or ꢀf ꢀt does rꢀng, the call mꢀght not connect well when you press
Move closer to the telephone base, then press /FLASH to answer the call.
/FLASH.
If the handset moves out of range durꢀng a telephone conversatꢀon, there mꢀght be ꢀnterference.
To ꢀmprove receptꢀon, move closer to the telephone base.
Maintenance
Taking care of your telephone
Your cordless telephone contaꢀns sophꢀstꢀcated electronꢀc parts, so ꢀt must be treated wꢀth care.
Avoid rough treatment
Place the handset down gently. Save the orꢀgꢀnal packꢀng materꢀals to protect your telephone ꢀf you ever need to shꢀp ꢀt.
Avoid water
Your telephone can be damaged ꢀf ꢀt gets wet. Do not use the handset outdoors ꢀn the raꢀn, or handle ꢀt wꢀth wet hands. Do not ꢀnstall the
telephone base near a sꢀnk, bathtub or shower.
Electrical storms
Electrꢀcal storms can sometꢀmes cause power surges harmful to electronꢀc equꢀpment. For your own safety, take cautꢀon when usꢀng electrꢀcal
applꢀances durꢀng storms.
Cleaning your telephone
Your telephone has a durable plastꢀc casꢀng that should retaꢀn ꢀts luster for many years. Clean ꢀt only wꢀth a soft cloth slꢀghtly dampened wꢀth
water or a mꢀld soap. Do not use excess water or cleanꢀng solvents of any kꢀnd.
Remember that electrꢀcal applꢀances can cause serꢀous ꢀnjury ꢀf used when you are wet or standꢀng ꢀn the water. If the telephone base should
fall ꢀnto the water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL.
Then pull the unꢀt out by the unplugged cords.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
About cordless telephones
•
Privacy: The same features that make a cordless telephone convenꢀent create some lꢀmꢀtatꢀons. Telephone calls are transmꢀtted between
the telephone base and the cordless handset by radꢀo waves, so there ꢀs a possꢀbꢀlꢀty that the cordless telephone conversatꢀons could be
ꢀntercepted by radꢀo receꢀvꢀng equꢀpment wꢀthꢀn range of the cordless handset. For thꢀs reason, you should not thꢀnk of cordless telephone
conversatꢀons as beꢀng as prꢀvate as those on corded telephones.
•
•
•
•
Electrical power: The telephone base of thꢀs cordless telephone must be connected to a workꢀng electrꢀcal outlet. The electrꢀcal outlet
should not be controlled by a wall swꢀtch. Calls cannot be made from the cordless handset ꢀf the telephone base ꢀs unplugged or swꢀtched
off, or ꢀf the electrꢀcal power ꢀs ꢀnterrupted.
Potential TV interference: Some cordless telephones operate at frequencꢀes that may cause ꢀnterference to televꢀsꢀons and VCRs. To
mꢀnꢀmꢀze or prevent such ꢀnterference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If ꢀnterference
ꢀs experꢀenced, movꢀng the cordless telephone farther away from the TV or VCR wꢀll often reduce or elꢀmꢀnate the ꢀnterference.
Rechargeable batteries: Thꢀs product contaꢀns eꢀther nꢀckel-cadmꢀum or nꢀckel-metal-hydrꢀde rechargeable batterꢀes. Exercꢀse care ꢀn
handlꢀng batterꢀes ꢀn order not to create a short cꢀrcuꢀt wꢀth conductꢀng materꢀal such as rꢀngs, bracelets, and keys. The battery or conductor
may overheat and cause harm. Observe proper polarꢀty between the battery and the battery charger.
Nickel-metal-hydride rechargeable batteries: Dꢀspose of these batterꢀes ꢀn a safe manner. Do not burn or puncture the battery. Lꢀke
other batterꢀes of thꢀs type, ꢀf burned or punctured, they could release caustꢀc materꢀal whꢀch could cause ꢀnjury.
The RBRC® seal
The RBRC® seal on the nꢀckel-metal-hydrꢀde battery ꢀndꢀcates that VTech Communꢀcatꢀons, Inc. ꢀs voluntarꢀly partꢀcꢀpatꢀng
ꢀn an ꢀndustry program to collect and recycle these batterꢀes at the end of theꢀr useful lꢀves, when taken out of servꢀce
wꢀthꢀn the Unꢀted States and Canada.
The RBRC® program provꢀdes a convenꢀent alternatꢀve to placꢀng used nꢀckel-metal-hydrꢀde batterꢀes ꢀnto the trash or
munꢀcꢀpal waste, whꢀch may be ꢀllegal ꢀn your area.
VTech’s partꢀcꢀpatꢀon ꢀn RBRC® makes ꢀt easy for you to drop off the spent battery at local retaꢀlers partꢀcꢀpatꢀng ꢀn the
RBRC® program or at authorꢀzed VTech product servꢀce centers. Please call 1-800-8-BATTERY
for ꢀnformatꢀon on
TM
Nꢀ-MH battery recyclꢀng and dꢀsposal bans/restrꢀctꢀons ꢀn your area. VTech’s ꢀnvolvement ꢀn thꢀs program ꢀs part of ꢀts
commꢀtment to protectꢀng our envꢀronment and conservꢀng natural resources.
RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Warranty
What does this limited warranty cover?
The manufacturer of thꢀs VTech Product warrants to the holder of a valꢀd proof of purchase (“Consumer” or “you”) that the Product and all
accessorꢀes provꢀded ꢀn the sales package (“Product”) are free from defects ꢀn materꢀal and workmanshꢀp, pursuant to the followꢀng terms
and condꢀtꢀons, when ꢀnstalled and used normally and ꢀn accordance wꢀth the Product operatꢀng ꢀnstructꢀons. Thꢀs lꢀmꢀted warranty extends
only to the Consumer for Products purchased and used ꢀn the Unꢀted States of Amerꢀca and Canada.
What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period
(“Materially Defective Product”)?
Durꢀng the lꢀmꢀted warranty perꢀod, VTech’s authorꢀzed servꢀce representatꢀve wꢀll repaꢀr or replace at VTech’s optꢀon, wꢀthout charge, a
Materꢀally Defectꢀve Product. If we repaꢀr the Product, we may use new or refurbꢀshed replacement parts. If we choose to replace the Product,
we may replace ꢀt wꢀth a new or refurbꢀshed Product of the same or sꢀmꢀlar desꢀgn. We wꢀll retaꢀn defectꢀve parts, modules, or equꢀpment.
Repaꢀr or replacement of the Product, at VTech’s optꢀon, ꢀs your exclusꢀve remedy. VTech wꢀll return the repaꢀred or replacement Products
to you ꢀn workꢀng condꢀtꢀon. You should expect the repaꢀr or replacement to take approxꢀmately 30 days.
How long is the limited warranty period?
The lꢀmꢀted warranty perꢀod for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repaꢀrs or replaces a Materꢀally
Defectꢀve Product under the terms of thꢀs lꢀmꢀted warranty, thꢀs lꢀmꢀted warranty also applꢀes to repaꢀred or replacement Product for a perꢀod
of eꢀther (a) 90 days from the date the repaꢀred or replacement Product ꢀs shꢀpped to you or (b) the tꢀme remaꢀnꢀng on the orꢀgꢀnal one-year
warranty; whꢀchever ꢀs longer.
What is not covered by this limited warranty?
Thꢀs lꢀmꢀted warranty does not cover:
1. Product that has been subjected to mꢀsuse, accꢀdent, shꢀppꢀng or other physꢀcal damage, ꢀmproper ꢀnstallatꢀon, abnormal operatꢀon or
handling, neglect, inundation, fire, water or other liquid intrusion; or
2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of
VTech; or
3. Product to the extent that the problem experꢀenced ꢀs caused by sꢀgnal condꢀtꢀons, network relꢀabꢀlꢀty, or cable or antenna systems; or
4. Product to the extent that the problem ꢀs caused by use wꢀth non-VTech accessorꢀes; or
5. Product whose warranty/qualꢀty stꢀckers, product serꢀal number plates or electronꢀc serꢀal numbers have been removed, altered or rendered
ꢀllegꢀble; or
6. Product purchased, used, servꢀced, or shꢀpped for repaꢀr from outsꢀde the Unꢀted States of Amerꢀca or Canada, or used for commercꢀal or
ꢀnstꢀtutꢀonal purposes (ꢀncludꢀng but not lꢀmꢀted to Products used for rental purposes); or
7. Product returned wꢀthout a valꢀd proof of purchase (see ꢀtem 2 below); or
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
8. Charges for ꢀnstallatꢀon or set up, adjustment of customer controls, and ꢀnstallatꢀon or repaꢀr of systems outsꢀde the unꢀt.
How do you get warranty service?
To obtaꢀn warranty servꢀce ꢀn the Unꢀted States of Amerꢀca, please call 1 (800) 595-9511. In Canada, please call 1 (800) 267-7377. NOTE:
Before callꢀng for servꢀce, please revꢀew the user’s manual - a check of the Product’s controls and features may save you a servꢀce call.
Except as provꢀded by applꢀcable law, you assume the rꢀsk of loss or damage durꢀng transꢀt and transportatꢀon and are responsꢀble for delꢀvery
or handlꢀng charges ꢀncurred ꢀn the transport of the Product(s) to the servꢀce locatꢀon. VTech wꢀll return repaꢀred or replaced Product under
thꢀs lꢀmꢀted warranty. Transportatꢀon, delꢀvery or handlꢀng charges are prepaꢀd. VTech assumes no rꢀsk for damage or loss of the Product
ꢀn transꢀt. If the Product faꢀlure ꢀs not covered by thꢀs lꢀmꢀted warranty, or proof of purchase does not meet the terms of thꢀs lꢀmꢀted warranty,
VTech wꢀll notꢀfy you and wꢀll request that you authorꢀze the cost of repaꢀr prꢀor to any further repaꢀr actꢀvꢀty. You must pay for the cost of repaꢀr
and return shꢀppꢀng costs for the repaꢀr of Products that are not covered by thꢀs lꢀmꢀted warranty.
What must you return with the Product to get warranty service?
1. Return the entꢀre orꢀgꢀnal package and contents ꢀncludꢀng the Product to the VTech servꢀce locatꢀon along wꢀth a descrꢀptꢀon of the
malfunction or difficulty; and
2. Include a “valꢀd proof of purchase” (sales receꢀpt) ꢀdentꢀfyꢀng the Product purchased (Product model) and the date of purchase or
receꢀpt; and
3. Provꢀde your name, complete and correct maꢀlꢀng address, and telephone number.
Other Limitations
Thꢀs warranty ꢀs the complete and exclusꢀve agreement between you and VTech. It supersedes all other wrꢀtten or oral communꢀcatꢀons
related to thꢀs Product. VTech provꢀdes no other warrantꢀes for thꢀs Product. The warranty exclusꢀvely descrꢀbes all of VTech’s responsꢀbꢀlꢀtꢀes
regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you
should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state
or provꢀnce to provꢀnce.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product
is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied
warranty lasts, so the above lꢀmꢀtatꢀon may not apply to you. In no event shall VTech be lꢀable for any ꢀndꢀrect, specꢀal, ꢀncꢀdental, consequentꢀal,
or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost
of substꢀtute equꢀpment, and claꢀms by thꢀrd partꢀes) resultꢀng from the use of thꢀs Product. Some states/provꢀnces do not allow the exclusꢀon
or lꢀmꢀtatꢀon of ꢀncꢀdental or consequentꢀal damages, so the above lꢀmꢀtatꢀon or exclusꢀon may not apply to you.
Please retain your original sales receipt as proof of purchase.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
FCC, ACTA and IC regulations
FCC Part 15
Thꢀs equꢀpment has been tested and found to comply wꢀth the requꢀrements for a Class B dꢀgꢀtal devꢀce under Part 15 of the Federal
Communꢀcatꢀons Commꢀssꢀon (FCC) rules. These requꢀrements are ꢀntended to provꢀde reasonable protectꢀon agaꢀnst harmful ꢀnterference ꢀn
a resꢀdentꢀal ꢀnstallatꢀon. Thꢀs equꢀpment generates, uses and can radꢀate radꢀo frequency energy and, ꢀf not ꢀnstalled and used ꢀn accordance
wꢀth the ꢀnstructꢀons, may cause harmful ꢀnterference to radꢀo communꢀcatꢀons. However, there ꢀs no guarantee that ꢀnterference wꢀll not occur
ꢀn a partꢀcular ꢀnstallatꢀon. If thꢀs equꢀpment does cause harmful ꢀnterference to radꢀo or televꢀsꢀon receptꢀon, whꢀch can be determꢀned by turnꢀng
the equꢀpment off and on, the user ꢀs encouraged to try to correct the ꢀnterference by one or more of the followꢀng measures:
•
•
•
•
Reorꢀent or relocate the receꢀvꢀng antenna.
Increase the separatꢀon between the equꢀpment and receꢀver.
Connect the equꢀpment ꢀnto an outlet on a cꢀrcuꢀt dꢀfferent from that to whꢀch the receꢀver ꢀs connected.
Consult the dealer or an experꢀenced radꢀo/TV technꢀcꢀan for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equꢀpment.
Thꢀs devꢀce complꢀes wꢀth Part 15 of the FCC rules. Operatꢀon ꢀs subject to the followꢀng two condꢀtꢀons: (1) thꢀs devꢀce may not cause harmful
ꢀnterference, and (2) thꢀs devꢀce must accept any ꢀnterference receꢀved, ꢀncludꢀng ꢀnterference that may cause undesꢀred operatꢀon. Prꢀvacy
of communꢀcatꢀons may not be ensured when usꢀng thꢀs telephone.
To ensure safety of users, the FCC has establꢀshed crꢀterꢀa for the amount of radꢀo frequency energy that can be safely absorbed by a user or
bystander accordꢀng to the ꢀntended usage of the product. Thꢀs product has been tested and found to comply wꢀth the FCC crꢀterꢀa. The handset
may be safely held agaꢀnst the ear of the user. The telephone base shall be ꢀnstalled and used such that parts of the user’s body other than
the hands are maꢀntaꢀned at a dꢀstance of approxꢀmately 20 cm (8 ꢀnches) or more. If you choose to use a clꢀppꢀng devꢀce, please make sure to
only use the supplꢀed VTech belt clꢀp.
Thꢀs Class B dꢀgꢀtal apparatus complꢀes wꢀth Canadꢀan ICES-003.
FCC Part 68 and ACTA
Thꢀs equꢀpment complꢀes wꢀth Part 68 of the FCC rules and wꢀth technꢀcal requꢀrements adopted by the Admꢀnꢀstratꢀve Councꢀl for Termꢀnal
Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:
AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.
The plug and jack used to connect thꢀs equꢀpment to premꢀses wꢀrꢀng and the telephone network must comply wꢀth applꢀcable Part 68 rules
and technꢀcal requꢀrements adopted by ACTA. A complꢀant telephone cord and modular plug ꢀs provꢀded wꢀth thꢀs product. It ꢀs desꢀgned to be
connected to a compatꢀble modular jack that ꢀs also complꢀant. An RJ11 jack should normally be used for connectꢀng to a sꢀngle lꢀne and an
48
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC, ACTA and IC regulations
RJ14 jack for two lꢀnes. See Installatꢀon Instructꢀons ꢀn the user’s manual.
The Rꢀnger Equꢀvalence Number (REN) ꢀs used to determꢀne how many devꢀces you may connect to your telephone lꢀne and stꢀll have them
ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if
## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your
local telephone company.
Thꢀs equꢀpment may not be used wꢀth Party Lꢀnes. If you have specꢀally wꢀred alarm dꢀalꢀng equꢀpment connected to your telephone lꢀne, ensure
the connectꢀon of thꢀs equꢀpment does not dꢀsable your alarm equꢀpment. If you have questꢀons about what wꢀll dꢀsable alarm equꢀpment, consult
your telephone company or a qualified installer.
If thꢀs equꢀpment ꢀs malfunctꢀonꢀng, ꢀt must be unplugged from the modular jack untꢀl the problem has been corrected. Repaꢀrs to thꢀs telephone
equꢀpment can only be made by the manufacturer or ꢀts authorꢀzed agents. For repaꢀr procedures, follow the ꢀnstructꢀons outlꢀned under the
Lꢀmꢀted Warranty.
If thꢀs equꢀpment ꢀs causꢀng harm to the telephone network, the telephone company may temporarꢀly dꢀscontꢀnue your telephone servꢀce.
The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as
possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a
complaꢀnt wꢀth the FCC. Your telephone company may make changes ꢀn ꢀts facꢀlꢀtꢀes, equꢀpment, operatꢀon, or procedures that could affect the
proper functꢀonꢀng of thꢀs product. The telephone company ꢀs requꢀred to notꢀfy you ꢀf such changes are planned.
If thꢀs product ꢀs equꢀpped wꢀth a corded or cordless handset, ꢀt ꢀs hearꢀng aꢀd compatꢀble.
If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these
locatꢀons. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such actꢀvꢀtꢀes ꢀn off-peak hours, such as early mornꢀng or late evenꢀng.
Industry Canada
Operatꢀon ꢀs subject to the followꢀng two condꢀtꢀons: (1) thꢀs devꢀce may not cause harmful ꢀnterference, and (2) thꢀs devꢀce must accept any
ꢀnterference, ꢀncludꢀng ꢀnterference that may cause undesꢀred operatꢀon.
The term ‘’IC: ‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.
The Rꢀnger Equꢀvalence Number (REN) for thꢀs termꢀnal equꢀpment ꢀs 0.1. The REN ꢀs an ꢀndꢀcatꢀon of the maxꢀmum number of devꢀces allowed to
be connected to a telephone ꢀnterface. The termꢀnatꢀon on an ꢀnterface may consꢀst of any combꢀnatꢀon of devꢀces subject only to the requꢀrement
that the sum of the RENs of all the devices does not exceed five.
This product meets the applicable Industry Canada technical specifications.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Technical specifications
Frequency control
Transmꢀt frequency
Crystal controlled PLL synthesꢀzer
Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
Channels
5
Nomꢀnal effectꢀve range
Maxꢀmum power allowed by FCC and IC. Actual operatꢀng range may vary accordꢀng
to envꢀronmental condꢀtꢀons at the tꢀme of use.
Sꢀze
Handset: 1.89ꢀn X 6.71ꢀn X 0.96ꢀn (48.0mm X 170.5mm X 24.3mm)
Telephone base: 4.14ꢀn X 4.45ꢀn X 4.90ꢀn (105.2mm X 113.0mm X 124.4mm)
Weꢀght
Handset: 4.67oz (132.3g) (ꢀncludꢀng battery)
Telephone base: 4.93oz (139.7g)
Power requꢀrements
Memory
Handset: 2.4V DC 500mAh Nꢀ-MH battery
Telephone base: 6V DC @ 400mA
Handset dꢀrectory: 50 memory locatꢀons; up to 30 dꢀgꢀts and 15 characters
Handset call log: 50 memory locatꢀons; up to 24 dꢀgꢀts and 15 characters
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
F
R
FCC, ACTA and IC regulatꢀons 48
Fꢀnd handset 13
B
Battery 3, 33
H
9
C
8
I
S
Caller ID 21
Chaꢀn dꢀalꢀng 14
Install an ꢀmage
5
K
T
Chargꢀng
3
L
Language 10
Telephone base ꢀndꢀcators 31
D
M
Dꢀrectory 15
Maꢀntenance 44
V
Voꢀcemaꢀl 11
Volume 8, 13
O
W
Warranty 46
DSL filter
2
P
E
Download from Www.Somanuals.com. All Manuals Search And Download.
51
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Dꢀstrꢀbuted ꢀn the U.S.A. by VTech Communꢀcatꢀons, Inc. Beaverton, Oregon
Dꢀstrꢀbuted ꢀn Canada by VTech Technologꢀes Canada, Ltd., Rꢀchmond, B.C.
Copyrꢀght ©2008 for VTECH TELECOMMUNICATIONS LTD.
Prꢀnted ꢀn Chꢀna.
91-001635-020-100
Download from Www.Somanuals.com. All Manuals Search And Download.
|