CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 1
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 3
INTRODUCTION
The One For All 3 Device Universal Remote Control (URC-3021) is designed
to remotely operate up to three home entertainment devices. It also
features intuitive and easy-to-use keys for instant control of DVD and PVR
(or DVR) components. Moreover, its sophisticated technology will allow you
to consolidate your original home entertainment remote controls into one
easy-to-use product. Advanced features include:
•
Intuitive buttons to allow easy access to functions and menus on your DVD
player, PVR (or DVR), and Cable/Satellite devices
•
•
Direct code setup for easy device programming
Step-and-Set code search and Code Verification for an alternate way to pro-
gram devices
•
•
Power Macro for master on/off control of all of your equipment with a single
keystroke
Volume Lock/Unlock feature to lock or unlock the volume control to one mode
or individual modes
•
•
•
•
Device Key Re-Assignment to remotely control a second (duplicate) device
Channel Scan and Favorite Channel Scan for easy channel surfing
Color-coded keys to quickly locate popular functions
Extensive code library for popular video devices including DVD players and
PVRs (or DVRs)
The URC-3021 remote control requires two (2) new AAA alkaline batter-
ies (not included) and some easy programming to control your devices.
For best results, please read and perform all instructions listed here. Also,
keep this guide for future reference.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 4
FEATURES AND FUNCTIONS
Use the illustration below to locate features on the One For All 3 Device
Universal Remote Control (URC-3021) and then study the Key Charts (on
the next two pages) to learn how they function.
To find out what type of devices can be controlled by each device key after
programming, see the Device Table on page 6.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 5
Key Charts
When the LED (red light) blinks, the remote control
is working and (after programming) is sending
signals.
Press DVD/VCR, CBL/SAT, or TV once to select a
desired home entertainment device to control.
Also see the Device Table on page 6.
Press POWER once to turn on or off the selected
device. For master power control, see Programming
A Master Power Macro on page 10.
Use the keypad (1 ~ 9 and 0) to directly select
channels (e.g., 009 or 031).
Use TV/VID to switch the TV’s input to view TV or
video programs.
Press ENTER once after entering the channel
numbers on some TVs.
Use GUIDE to display your selected device’s
program guide or setup menu.
Press MENU once to display your selected device’s
main menu.
Use INFO to display the current channel and
program or on-screen directory.
Use EXIT to exit from your selected device’s guide
or menu.
Use the Cursor Keys to move the cursor in the pro-
gram guide and menu screens.
Use SELECT (OK) to choose options from your
selected device’s menu or guide.
Press LAST once to recall the last channel.
Use FAV to scan all channels, or after programming,
to scan up to10 favorite channels.
Use CHL (or CHM) to select the next higher (or
lower) channel.
Press SUBTITLE/CC once to display (or turn off) sub-
titles or closed captions, if available on your DVD
player or cable/satellite service.
For a PVR (or DVR), press PVR MENU once to dis-
play a list of your recorded shows.
Press MUTE once to turn the sound off or on.
Use VOLL (or VOLM) to raise (or lower) the sound
volume.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 6
Use REW, PLAY, FWD, PAUSE,or STOP to control your VCR,
PVR (or DVR), or DVD player.
For a DVD player, use SKIP F. or SKIP R. to view the next
or previous chapter.
For a VCR, PVR (or DVR), or VOD (if available), use SCAN-
or SCAN+ to quickly scan forward or back through a video
program. Use REPLAY for an instant replay. Use QUICK
SKIP to advance the video program a preset amount (as
set on your device).
Press REC twice to record a VCR or PVR (or DVR)
program.
Use SLEEP to set the sleep timer on a selected device if
equipped with this feature.
Use SET for all programming sequences.
Device Table
NOTE: Please refer to the table below when performing the instructions in “Programming
Device Control” on page 8.
After programming, the One For All 3 Device Universal Remote Control will
be able to control the following types of devices:
DEVICE KEY
CONTROLS THESE TYPES OF DEVICES
•
•
•
•
•
•
•
•
DVD Player
VCR
PVR (or DVR)
TV/DVD Player Combo
VCR/DVD Player Combo
TV/VCR Combo
TV/VCR/DVD Player Combo
VCR/DVD Player Combo
•
•
•
•
Cable Box (or Converter)
Cable Box/PVR (or DVR) Combo
Satellite Receiver
Satellite Receiver/PVR (or DVR) Combo
•
Television
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 7
INSTALLING BATTERIES
❶
❷
❷
❸
1.
2.
On the remote control’s back, push the tab and lift off the
battery cover.
Obtain two (2) new AAA alkaline batteries. Match the +
and – marks on the batteries to the + and – marks in the
battery case, then insert the new batteries.
3.
4.
Press the battery cover back into place. The tab should
click when the cover is locked.
Test the remote control by pressing any mode key (e.g.,
TV). If the batteries are inserted correctly, the LED (red
light) will blink.
NOTE: When batteries need replacement, the remote control will stop operat-
ing. Remove the old batteries and insert new ones within 10 minutes to
ensure all of your programming information is restored.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 8
PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box. To control devices other than the default brands, perform the fol-
lowing steps; otherwise skip this section:
1.
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2.
On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once. After program-
ming a VCR Combo device, you will be able to control channel selec-
tion, volume, and VCR functions.
NOTE: To program control of a DVD Player, DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once. After pro-
gramming a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3.
4.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed cor-
rectly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5.
6.
Aim the remote control at the device and press POWER
once. The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
Repeat steps 1 through 5 for each device you want to con-
trol. For future reference, write down each working device
code in the following boxes:
DVD/VCR Code:
Device Type:__________________
CBL/SAT Code:
Device Type:__________________
TV Code:
Device Type:__________________
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 9
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1.
2.
On the remote control, press TV once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
3.
Enter 9 - 9 - 1. The LED will blink twice.
4.
Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CHL, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5.
6.
To lock in the code, press and release SET. The LED will
blink twice.
To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
CHECKING THE CODES
If you have set up the remote control using the Searching For Your Code pro-
cedure as above, you may need to find out which four-digit code is operat-
ing your equipment. For example, to find out which code is operating your
TV:
1.
2.
On the remote control, press TV once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
3.
Enter 9 - 9 - 0. The LED will blink twice.
4.
To view the code for the first digit, press 1 once. Wait 3
seconds, count the LED blinks (e.g., three blinks = 3) and
write down the number in the leftmost box in the TV
code boxes on page 8.
NOTE: If a code digit is “0”, the LED will not blink.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 10
5.
Repeat step 4 (on the previous page) three more times for
remaining digits. Use 2 for the second digit, 3 for the third
digit, and 4 for the fourth digit.Write down the code dig-
its in the remaining TV code boxes on page 8.
6. To check for codes of other devices, repeat steps 1
through 5 (starting on the previous page), but substitute
the appropriate device key for each device you are check-
ing.Write down the device’s code digits in the appropriate
code boxes on page 8.
PROGRAMMING A MASTER POWER MACRO
In its default state, the POWER key on the One For All 3 Device Universal
Remote Control will individually power your home entertainment devices
on or off. However, you can also program a Master Power Macro onto the
POWER key that will sequentially turn on or off all the devices with a single
key press.
Programming The Power Key For The Master Power Macro
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 9 - 5. The LED will blink twice. Then press POWER
once.
3.
4.
For the first device you want in the power-on sequence,
press its device key (e.g., CBL/SAT) once.
Repeat step 3 up to two more times to add desired
devices to the power-on sequence (e.g., DVD/VCR and TV).
5.
To save the settings and exit the program, press and hold
SET until the LED blinks twice, then release SET.
Operating The Master Power Macro
1.
2.
After programming, point the remote control at the
devices and press POWER for at least 2 seconds to sequen-
tially turn on (or off) your devices.
NOTE: When POWER is pressed for less than 2 seconds, a power com-
mand will only be sent to the currently-selected device. This allows
you to still individually power devices on or off.
Devices will turn on (or off) according to your pro-
grammed sequence.
NOTE: The currently-selected device will always turn on or off first,
followed by the remaining programmed sequence. After the master
power sequence has been completed, the remote control will be set to
control the first powered-on device.
NOTE: If one or more devices does not have a POWER key, the power
off/on sequence may be slightly delayed when the remote control signals
the device(s). This action is normal.
continued on next page...
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 11
PROGRAMMING A MASTER POWER MACRO (cont’d)
Clearing The Master Power Macro
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 9 - 5. The LED will blink twice. Then press POWER
once.
3.
Press and hold SET until the LED blinks twice, then release
SET. The Master Power Macro is now cleared.
RE-ASSIGNING DEVICE KEYS
The One For All 3 Device Universal Remote Control can be set to control a
DVD player and a VCR (or a PVR) or a second DVD player by re-assigning
the unused CBL/SAT key as follows:
1.
On the remote control, press and hold SET until the LED
(red light) blinks twice, then release SET.
2.
Enter 9 - 9 - 2. The LED will blink twice.
3.
4.
Press DVD/VCR once.
Press CBL/SAT once. The LED will blink twice. The CBL/SAT key
is now ready to be set up to control your VCR (or PVR) or
second DVD player. See Programming Device Control on page
8.
NOTE: Only one device can be assigned to an unused device key at a time.
USING CHANNEL SCAN
In the CBL/SAT or TV mode, use the FAV key to start a 3-second scan of all
channels. Or, if programmed, use the FAV key to scan only your favorite
channels to view a desired channel (see Programming Favorite Channel Scan
on next page. )
1.
Press CBL/SAT or TV once.
2.
Press FAV once.
•
If Favorite Channel Scan has been set up, scanning of favorite
channels will start with up to 100 channel changes or until
stopped by pressing any key.
•
If Favorite Channel Scan has not been set up, scanning
will start with the current channel, and continue up to
100 channel changes or until stopped by pressing any key.
3.
To stop scanning channels at any time, press any key once.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 12
PROGRAMMING FAVORITE CHANNEL SCAN
In the CBL/SAT or TV mode, you can store a list of up to 10 favorite channels,
in any order, that will be immediately scanned when FAV is pressed (see
Using Channel Scan on the previous page).
NOTE: Favorite channels can only be programmed for one mode. After programming, if FAV
is pressed while in another mode, the remote control will start scanning all channels instead
(if applicable to the selected device).
1.
On the remote control, press CBL/SAT or TV once.
2.
3.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
Enter 9 - 9 - 6. The LED will blink twice.
4.
5.
Use the keypad to enter a favorite channel number (e.g.,
031). Then press SET once.
NOTE: If the original remote control required pressing an Enter key
to change the channel, also press the ENTER key after the channel
number (e.g., 0 - 3 - 1 - ENTER). On some satellite receivers and cable
boxes, you may need to press the SELECT (OK) key instead of ENTER.
If desired, repeat step 4 for each channel to be stored, up
to a total of 10 channels.
NOTE: If you try entering more than 10 channels, the remote control
will automatically exit programming. To change your favorite chan-
nel list at this point, you will first need to delete the existing list by
performing the steps in “Clearing Custom Programming” on page 14.
Then, perform the instructions in this section once again.
6.
To exit programming with less than 10 favorite channels
stored, press and hold SET until the LED blinks twice.
Otherwise, the remote control will automatically exit the
program after 10 channels have been stored.
CHANGING VOLUME LOCK
The One For All 3 Device Universal Remote Control is set at the factory for
independent volume control of each selected device. However, you may
change the Volume Lock setting to Global Volume Lock so that a device’s vol-
ume will be locked to one mode (e.g., to control TV volume in all other
modes).After that, if desired, you can perform Individual Volume Unlock on
a selected device to set its volume control for independent operation.
Locking Volume Control To One Mode
(Global Volume Lock)
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
continued on next page...
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 13
CHANGING VOLUME LOCK (cont’d)
Locking Volume Control To One Mode
(Global Volume Lock)
2.
3.
Enter 9 - 9 - 3 and then press any mode key once (e.g., TV).
The LED will blink twice.
Now, when you press VOLL, VOLM, or MUTE, the volume of
the selected device (e.g., TV) will be controlled, regardless
of the mode you have selected.
Unlocking Volume Control For A Single Device (Individual Volume
Unlock)
1.
After performing Global Volume Lock (above), press a desired
mode key where you want volume to be unlocked (e.g.,
DVD/VCR) and controlled within its own mode.
2.
3.
Press and and hold SET until the LED (red light) blinks twice,
then release SET.
Enter 9 - 9 - 3 and then press VOLMonce. The LED will
blink four times.
4.
5.
If desired, repeat steps 1 through 3 (of this section) for
each device that you want volume to be unlocked.
After selecting a device that has volume unlocked (e.g.,
DVD/VCR), pressing VOLL, VOLM, or MUTE will control the
device’s volume only in its own mode.
Unlocking All Volume Control (Restoring Default Setting)
NOTE: Performing these instructions will restore independent volume control for all pro-
grammed devices (e.g., TV volume control in TV mode, VCR volume in DVD/VCR mode,
etc.).
1.
On the remote control, press and hold SET until the LED (red
light) blinks twice, then release SET.
2.
Enter 9 - 9 - 3 and then press VOLLonce. The LED will
blink four times.
3.
Volume will again be independently controlled according
to its default states for all programmed devices.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 14
CLEARING CUSTOM PROGRAMMING
The One For All 3 Device Universal Remote Control contains an Operational
Feature Reset program. If desired, you can use it to clear custom program-
ming, except your setup codes and reassigned device keys, and reset them
to original factory settings.Also see Restoring Factory Default Settings below.
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, and Volume Lock.
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 8 - 0. The LED will blink twice. The remote con-
trol will return to normal operation.
RESTORING FACTORY DEFAULT SETTINGS
The One For All 3 Device Universal Remote Control also contains a Factory
Reset program that you can use to reset all custom settings and setup codes
to original factory settings.Also see Clearing Custom Programming above.
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, Volume Lock, Reassigned Devices, and all
device settings.
1.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
2.
Enter 9 - 8 - 1. The LED will blink twice. The remote con-
trol will return to normal operation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 15
TROUBLESHOOTING
PROBLEM:
SOLUTION:
PROBLEM:
LED (red light) does not blink when you press a key.
Replace batteries with two new AAA alkaline batteries.
LED blinks when you press a key, but home entertain-
ment device does not respond.
SOLUTION:
Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet
away.
PROBLEM:
SOLUTION:
The unit does not control home entertainment devices
or commands are not working properly.
Try all listed codes for the device brands being set up.
Make sure they can be operated with an infrared remote
control.
PROBLEM:
SOLUTION:
Changing channels does not work.
If original remote required pressing ENTER or SELECT to
change channels, press ENTER or SELECT on this remote after
entering the channel number.
PROBLEM:
SOLUTION:
Tried Searching For Your Code method and still could not
find a working code.
Clear the device key as follows: Press and hold SET until
the LED (red light) blinks twice, then release. Next enter
9 - 9 - 2. Then press the device key to be cleared twice.
Now repeat the Searching For Your Code method on page
9.
PROBLEM:
SOLUTION:
CHL and CHMdo not work for your RCA TV.
Due to RCA design (1983-1987), only the original
remote control will operate these functions.
PROBLEM:
SOLUTION:
No remote control of volume.
See Changing Volume Lock on page 12 to lock/unlock
volume.
For assistance, please contact us in any of the following ways:
•
•
•
E-mail: [email protected]
Consumer Help Line: (330) 405-8612
INSTRUCTIONS TO THE USER
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide a reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment into an outlet or a circuit different from that to which the
receiver is connected.
•
Consult dealer or experienced radio/TV technician for help.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 16
LIFETIME WARRANTY
One For ALL ("OFA") warrants this product to be free from defects in materials
and workmanship, under normal use, throughout the period of the product’s
ownership by the original purchaser. This warranty does not cover damages or
failures caused by products or services not supplied by OFA, or which result from
accident, misuses, abuse, neglect, mishandling, misapplication, faulty installation,
set-up adjustment, improper maintenance, alteration, maladjustment of con-
sumer controls, modifications, commercial use, or that is attributable to acts of
God.
There are no express warranties except as listed above. OFA SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF
WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental or consequen-
tial damagers, or limitations on how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
To obtain warranty service for a defective product, please return the product,
preferably in the original carton, along with your purchase receipt, to the store of
original purchase for the first 90 days.A note detailing the complaint would be
helpful. The store, at its option, will replace or repair this product if found to be
defective.
If the unit has been purchased more than 90 days ago, please return it to CT
Global Inc. 8918 Stone Green Way, Louisville, KY 40220 together with the original
receipt and $3.95 to cover postage and handling. It will be repaired or replaced at
the manufacturer’s option. The manufacturer reserves the right to substitute a
currently manufactured model with equal or superior features.
One For All: (330) 405-8655
URC-3021
March 2004
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 17
ADDITIONAL INFORMATION
As you update your home entertainment system, One For All® has a universal
remote control that will fit your needs. Look for these exciting products at a
retailer near you:
One For All Access 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-3605
One For All Big Easy 3-Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-3300
One For All DVD Expert 4-Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-4041
One For All Big Easy 4-Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-4330
One For All Access 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-4605
One For All Access 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-5705
One For All 4 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-4021
One For All 3 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-3021
One For All PVR 6-Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-6131
One For All 6-Device Home Theater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-6011
One For All 8-Device Home Theater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-8011
One For All 8L-Device Home Theater
With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-8811
One For All A/V LCD 8 Device
With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-8910
One For All IR/RF LCD 8 Device
With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-9910
One For All 8 Device Home Theater Remote
Powered By Kameleon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-9960
ONE FOR ALL® is the registered trademark of Universal Electronics Inc.
Computime International Ltd. is the Licensee of the ONE FOR ALL® brand for
USA and Canada.
Copyright 2004 by Universal Electronics Inc. No part of this publication may be
reproduced, transmitted, transcribed, stored in any retrieval system, or translat-
ed to any language, in any form or by any means, electronic, mechanical, mag-
netic, optical, manual, or otherwise, without the prior written permission of
Universal Electronics Inc.
The One For All® 3 Device Universal Remote Control is compatible for use in
North America, excluding Mexico.
This One For All® 3 Device Universal Remote Control is covered by one or more
of the following US Patents:
6,587,067
6,587,067
6,496,135
5,481,256
5,515,052
5,959,751
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 18
MANUFACTURER’S CODES
Setup Codes for Cable Boxes
Americast
Bell South
Director
0899
0899
0476
Philips
0305, 0317
Pioneer
Pulsar
0877, 1877, 0144, 0533
0000
General Instrument 0476, 0810, 0276
Quasar
0000
GoldStar
Hamlin
Jerrold
0144
Runco
0000
0009
Samsung
Scientific Atlanta
Sony
0144
0476, 0810, 0276
0000
0877, 1877, 0477
1006
Memorex
Motorola
Pace
0476, 0810, 0276
0237
Supercable
Toshiba
Zenith
0276
0000
Panasonic
Paragon
0000, 0107
0000
0000, 0525, 0899
Setup Codes for Cable Box/PVR (or DVR) Combos
Motorola
1376
Scientific Atlanta
1877
Pioneer
1877
Setup Codes for DVD Players
Apex Digital
0672, 0717, 0794, 1056, 0755,
0797, 1100, 0796, 1061
Mintek
0839, 0717
0521, 1521
0717
Mitsubishi
Nesa
Axion
1072
Blaupunkt
Blue Parade
CineVision
Curtis Mathes
CyberHome
Daewoo
Denon
0717
Norcent
Onkyo
1003
0571
0503
0876
Oritron
Panasonic
Philips
0651
1087
0490, 1762
0503, 0539, 0646
0525, 0571
0539
1024, 1023, 0816
0784
Pioneer
Polk Audio
Proscan
Qwestar
RCA
0490
Dual
1068
0522
DVD2000
Emerson
Enterprise
Fisher
0521
0651
0591, 0675
0591
0522, 0571, 0717
0623
Rotel
0670
Rowa
0823
Funai
0675
Samsung
Sanyo
0573, 1075, 0820
0670
GE
0522, 0815, 0717
0744, 0715, 0783
0699
Go Video
GPX
Shinsonic
Sony
0533, 0839
0533, 1533, 0864, 1033
0675
Greenhill
Hitachi
0717
Sylvania
Symphonic
Technics
Theta Digital
Toshiba
Tredex
0573
0675
Hiteker
JVC
0672
0490
0558, 0623
0490, 0534
0717, 1020
0651
0571
Kenwood
KLH
0503
0799
Koss
Urban Concepts
Xbox
0503
Lasonic
Magnavox
Marantz
Microsoft
0798
0522
0503, 0675
0539
Yamaha
Zenith
0490, 0539, 0545
0503, 0591
0522
Setup Codes For DVD Player/VCR Combos
Apex Digital
Go Video
Hitachi
1061
Sanyo
0104
0744, 0715
0000
Sony
0864
Sylvania
Symphonic
Toshiba
0675, 0000
0675, 0000
0503
Panasonic
RCA
1762
0060
Samsung
1075, 0820
continued on next page...
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 19
MANUFACTURER’S CODES
Setup Codes for PVRs (or DVRs)
Panasonic
Philips
0616
Sonic Blue
Sony
0616, 0614
0636
0618
ReplayTV
0614, 0616
Tivo
0636, 0618
Setup Codes for Satellite Receivers
AlphaStar
0772
Mitsubishi
Motorola
Next Level
Panasonic
Paysat
0749
DirecTV
0392, 0566, 0639, 0247, 0749,
1749, 0724, 0819, 1856
0869
0869
Dish Network System 1005, 0775
0247, 0701
0724
Dishpro
Echostar
Expressvu
GE
1005, 0775
1005, 0775
0775
Philips
0749, 1749, 0724, 0722
0392, 0566
0869
Proscan
RadioShack
RCA
0566
General Instrument 0869
0392, 0566, 0855, 0143
1276
GOI
0775
0819
0775
Samsung
SKY
Hitachi
HTS
0856
Sony
0639, 1639
0869
Hughes Network
Systems
Star Choice
Toshiba
UltimateTV
Uniden
0749, 1749
0775
0749, 1749, 0790, 1285
0392, 0639
0724, 0722
0856, 1856
JVC
Magnavox
Memorex
0724, 0722
0724
Zenith
Setup Codes for Satellite Receiver/PVR (or DVR) Combos
Echostar
Expressvu
Proscan
1005
0775
0392
RCA
Sony
0392
0639
Setup Codes for TVs
AOC
0030
Crown Mustang
Curtis Mathes
0672
Admiral
Advent
0093, 0463
0047, 0054, 0154, 0451, 0093,
0060, 0702, 0030, 0145, 0166,
1147, 1347
0761, 0842
Aiko
0092
Daewoo
0451, 1661, 0092, 0672, 0623
Akai
0702, 0030, 0672, 0812
Denon
0145
Alfide
0672
Dumont
0017
America Action
Anam
0180
Durabrand
Electroband
Emerson
0178, 0180
0000
0180
Apex Digital
Audiovox
Baysonic
Bell & Howell
Bradford
Broksonic
CXC
0748, 0765, 0767
0451, 0180, 0092, 0623
0180
0154, 0236, 0463, 0180, 0178,
0171, 0623
Envision
Fisher
0030
0154
0154
0180
Fujitsu
Funai
0683, 0809
0180, 0171
0180
0236, 0463
0180
Futuretech
GE
Candle
0030
0047, 0051, 0451, 0178, 1147,
1347
Carnivale
Carver
0030
0054
Gateway
1755, 1756
0017, 0030
0030, 0178
0053
Celebrity
Celera
0000
Gibralter
GoldStar
0765
Changhong
Cineral
Citizen
0765
Gradiente
Grundig
0451, 0092
0060, 0030, 0092
0180
0672
Grunpy
0180
Clarion
Contec
Hallmark
Harman/Kardon
Harvard
0178
0180
0054
Craig
0180
0180
Crosley
Crown
0054
Havermy
Hello Kitty
0093
0180, 0672
0451
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 20
Hitachi
Infinity
Inteq
0145, 1145
RCA
0047, 1047, 1147, 1247, 1347,
1447, 1547
0054
RadioShack
Realistic
Runco
SSS
0047, 0154, 0180, 0030, 0178
0017
0154, 0180, 0030, 0178
JBL
0054
0017, 0030
JCB
0000
0180
JVC
0463, 0053
Sampo
Samsung
Sansei
Sansui
Sanyo
0030, 1755
Jensen
KEC
0761
0060, 0702, 0030, 0178, 0812
0180
0451
KLH
0765, 0767
0463
KTV
0180, 0030
0154
Kenwood
Kioto
0030
Scotch
Scott
0178
0706
0236, 0180, 0178
LXI
0047, 0054, 0154, 0156, 0178
0150, 0030, 0178
0060, 0030
Sears
0047, 0054, 0154, 0156, 0178,
0171
MGA
MTC
Semivox
Semp
0180
Magnavox
Marantz
Matsushita
Megatron
Memorex
Midland
Mitsubishi
Motorola
Multitech
NAD
0054, 0706, 0030, 1454, 1254
0054, 0030
0156
Sharp
0093
0250, 0650
Sheng Chia
Sony
0093
0178, 0145
0000, 1100, 0810
0154, 0250, 0463, 0150, 0178
0047, 0017, 0051
0093, 0150, 1250, 0178, 0836
0093
Soundesign
Squareview
Starlite
0180, 0178
0171
0180
Supreme
Sylvania
Symphonic
TMK
0000
0180
0054, 0030, 0171
0156, 0178, 0866
0030, 1704, 0704
0092
0180, 0171
NEC
0178
NTC
TNCi
0017
Nikko
0030, 0178, 0092
0748, 0824
TVS
0463
Norcent
Onwa
Tandy
0093
0180
Technics
Techwood
Teknika
Telefunken
Toshiba
0051, 0250
Optimus
Optonica
Orion
0154, 0250, 0166, 0650
0093
0051
0054, 0180, 0150, 0060, 0092
0702
0236, 0463
Panasonic
Penney
0051, 0250, 0650
0154, 0156, 0060, 1356, 1656,
1704, 0650
0047, 0156, 0051, 0060, 0030,
0178, 1347
Toshiba
1256
Philco
Philips
Pilot
0054, 1661, 0463, 0030, 0145
Vector Research
Victor
0030
0054, 1454, 0690
0030
0053
Vidikron
Vidtech
0054
Pioneer
Portland
Prima
Prism
0166, 0866
0092
0178
ViewSonic
Wards
1755
0761
0054, 0030, 0178, 0866
0156
0051
Waycon
Proscan
Proton
Pulsar
Quasar
0047
White Westinghouse 0463, 0623
0178
Yamaha
Zenith
0030
0017
0017, 0463, 0178, 0092
0051, 0250, 0650
Setup Codes For TV/DVD Player Combos
Sylvania
0675
Setup Codes For TV/VCR Combos
America Action
Audiovox
Broksonic
Citizen
0278
GoldStar
1237
0278
Harley Davidson
Hitachi
0000
0479, 1479
0000
1278
Lloyd’s
0000
Colt
0072
Magnasonic
Magnavox
Magnin
1278
Curtis Mathes
Daewoo
Emerson
Funai
1035
0000, 1781
0240
1278
0479, 1479, 1278
0000
Memorex
0162, 1237
continued on next page...
GE
0240, 1035, 0807, 1060
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 21
MANUFACTURER’S CODES
Setup Codes For TV/VCR Combos, continued
MGA
0240
Sansui
0000, 1479, 0479
0240
Mitsubishi
Optimus
Orion
0807
Sanyo
0162
Sears
0000, 1237
0000, 1232
1781
1479, 0479
0162, 1035
0240, 1035, 1237
0162, 1035
0000
Sony
Panasonic
Penney
Sylvania
Symphonic
Thomas
Toshiba
Zenith
0000
Quasar
0000
RadioShack
RCA
1145, 0845
0000, 1479, 0479
0240, 0807, 1060, 1035
1014
Samsung
Setup Codes For TV/VCR/DVD Player Combos
Sharp
0807
Setup Codes For VCRs
ABS
1972
Harley Davidson
Harman/Kardon
Harwood
0000
Admiral
Adventura
Aiko
0048, 0209
0081, 0038
0072
0000
0278
Hewlett Packard
HI-Q
1972
Aiwa
0037, 0000
0047
Akai
0041
Hitachi
0000, 0042, 0041
Alienware
America Action
American High
Asha
1972
Hughes Network
Systems
0042
0278
iBUYPOWER
Jensen
1972
0035
0041
0240
JVC
0067, 0041
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
0037, 0278
KEC
0037, 0278
0240
Kenwood
KLH
0067, 0041, 0038
0104
0072
0184, 0121, 0209, 1479, 0479
Kodak
0035, 0037
0037
Lloyd’s
0000
Canon
0035
Logik
0072
Carver
0081
LXI
0037
CCE
0072, 0278
Magnasonic
Magnavox
Magnin
Marantz
Marta
1278
Citizen
0037, 0278, 1278
0035, 0039, 0081, 0000, 1781
Colt
0072
0240
Craig
0037, 0047, 0240, 0072
0035, 0081
0037
Curtis Mathes
Cybernex
CyberPower
Daewoo
Denon
0060, 0035, 0162, 0041, 1035
0240
Matsushita
Media Center PC
MEI
0035, 0162
1972
1972
0045, 0278, 1278
0042
0035
Memorex
0035, 0162, 0037, 0048, 0039,
0047, 0240, 0000, 0104, 0209,
0479, 1237
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
0038, 0039
0000
0037
MGA
0240, 0043
0037
MGN Technology 0240
0032
Microsoft
Mind
1972
Emerson
0037, 0184, 0000, 0121, 0043,
0209, 0278, 0479, 1479, 1278
1972
Minolta
Mitsubishi
Motorola
MTC
0042
Fisher
Fuji
0047, 0104
0035, 0033
0000
0067, 0043, 0807
0035, 0048
0240, 0000
0000, 0072
0104, 0067, 0041, 0038
0037
Funai
Garrard
Gateway
GE
0000
Multitech
NEC
1972
0060, 0035, 0240, 0807, 1060,
1035
Nikko
Noblex
0240
Go Video
GoldStar
Gradiente
0432
Northgate
Olympus
1972
0037, 0038, 1237
0000
0035
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 22
Optimus
1062, 0162, 0037, 0048, 0104,
0432
Shogun
Singer
0240
0072
Orion
0184, 0209, 1479, 0479
Sonic Blue
Sony
0614, 0616
Panasonic
Penney
1062, 0035, 0162, 1035, 0616
0035, 0032, 0033, 0000, 1232,
0636
0035, 0037, 0240, 0042, 0038,
1035, 1237
STS
0042
Pentax
0042
Sylvania
Symphonic
Tagar Systems
Tatung
0035, 0081, 0000, 0043, 1781
Philco
0035
0000
Philips
Pilot
0035, 0081, 0618
0037
1972
0041
Pioneer
Polk Audio
Profitronic
Proscan
Protec
0067
Teac
0000, 0041
0035, 0162
0035, 0037, 0000
0000
0081
Technics
Teknika
Thomas
Tivo
0240
0060, 1060
0072
0636, 0618
0240
Pulsar
0039
TMK
Quasar
RadioShack
Radix
0035, 0162, 1035
0000
Toshiba
0045, 0043, 1145, 0845
0037, 0240
1972
Totevision
Touch
0037
Randex
RCA
0037
Unitech
0240
0060, 0240, 0042, 1035, 0880,
0807, 1060
Vector
0045
Vector Research
Video Concepts
Videomagic
Videosonic
Viewsonic
Villain
0038
Realistic
0035, 0037, 0048, 0047, 0000,
0104
0045
0037
ReplayTV
Runco
0616, 0614
0039
0240
1972
Samsung
Sanky
0240, 0045, 1014
0048, 0039
0000
Wards
0060, 0035, 0048, 0047, 0081,
0240, 0000, 0042, 0072
Sansui
0000, 0067, 0209, 0041, 1479,
0479
White Westinghouse 0209, 0072
Sanyo
Scott
Sears
0047, 0240, 0104
XR-1000
Yamaha
Zenith
0035, 0000, 0072
0184, 0045, 0121, 0043
0038
0035, 0037, 0047, 0000, 0042,
0104, 1237
0039, 0033, 0000, 0209, 1479,
0479
Sharp
0048, 0807
0072
ZT Group
1972
Shintom
22
Download from Www.Somanuals.com. All Manuals Search And Download.
|