PA600 Rugged Enterprise PDA
- 2D/HF Model -
unitech
User’s Manual
382647G Version 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
1. This Transmitter must not cohabitate or operate in conjunction with any other
antenna(s) or transmitter(s).
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with FCC RF exposure com-
pliance requirements, avoid direct contact to the transmitting antenna during
transmission.
3. Any changes or modifications (including the antennas) made to this device that
are not expressly approved by the manufacturer may void the user’s authority
to operate the equipment.
FCC Label Statement
This device complies with part 15 of the FCC rules. Operation is subject to the follow-
ing two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Canadian Compliance Statement
This Class B Digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le
material broilleur du Canada.
European Conformity Statement
Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC 89/336/
EEC directives.
RoHS Statement
This device conforms to RoHS (Reduction Of Hazardous Sub-
stances) European Union regulations that set maximum con-
centration limits on hazardous materials used in electrical and
electronic equipment.
Laser Information
The Unitech PA600 series is certified in the U.S. to conform with DHHS/CDRH 21CFR
Subchapter J and IEC 825-1 requirements. Please note that Class II and Class 2
products are not considered to be hazardous. The PA600 series contains an internal
Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set
forth in the above regulations. The scanner is designed so that there is no human
access to harmful laser light during normal operation, user maintenance or service
operation.
The laser safety warning label required by the DHHS/IEC is on the PA600’s back
panel.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
CAUTION! Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous laser light. Use of
optical instruments with the scanner will increase eye hazard. Optical
instruments include binoculars, microscopes and magnifying glasses.
However, this does not include eye glasses worn by the user.
Battery Notices
The PA600 is equipped with a Lithium-Ion Battery Pack and Backup Battery. Both bat-
teries will discharge power if not frequently used.
Recharge the PA600 for at least 16 hours in order to fully charge the main battery and
backup battery. Recharge the PA600 through either of the following:
1. Plug the USB Charging Cable to the PA600 and insert the AC Adapter into the
USB Charging Cable’s power jack.
2. Place the PA600 into the Docking Station and plug the AC Adapter to the Dock-
ing Station’s power jack.
The Backup Battery ensures data stored on SDRAM is safe for up to 2 hours, when
the Main Battery disconnects from the P600. To prevent data loss, do not leave the
PA600 uncharged without the Main Battery for an extended time period.
NOTE: Rechargeable batteries are advised to replace every year or when 500
charge/discharge cycles occur to guarantee optimal performance. It is
normal that the battery balloons or expands beyond one year or the
maximum of 500 cycles. Although it does not cause harm, it can not be
used again and must be disposed of according to the location's safe bat-
tery disposal procedures.
If the performance decrease of greater than 20% in a Lithium-Ion bat-
tery, the battery is at the end of its life cycle. Do not continue to use, and
ensure the battery is disposed of properly.
The length of time that a battery power lasts depends on the battery type and how the
device is used. Conserve battery life through the following:
•
Avoid frequent full discharges because this places additional strain on the bat-
tery. Several partial discharges with frequent recharges are better than a deep
one. Recharging a partially charged lithium-Ion battery does not cause harm
because there is no memory.
•
•
Keep the lithium-Ion battery cool. Avoid a hot car. For prolonged storage, keep
the battery at a 40 percent charge level.
Do not leave the lithium-Ion battery discharged and unused for an extended
period because the battery will wear out and the longevity of the battery will be
at least shorter than half of the one with frequent recharges.
Battery charge notice
It is important to consider the environmental temperature whenever the Lithium-Ion
Battery Pack is charged. Charging is most efficient at room temperature or in a slightly
cooler environment. It is essential that batteries are charged within the temperature
range of 50°F - 113°F (10°C to 45°C). Charging batteries outside of this specified tem-
perature range could damage the batteries and shorten their charging life cycle.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION! Do not charge batteries at a temperature lower than 0°C, which will
increase the internal resistance to cause heat and make the batteries
unstable and unsafe. Please use a battery temperature detecting
device for a charger to ensure a safe charging temperature range.
Storage and safety notice
Although charged Lithium-Ion batteries may be left unused for several months, their
capacity may be depleted due to build up of internal resistance. If this happens they
will require recharging prior to use. Lithium-Ion batteries may be stored at tempera-
tures between (-4° - 140°) -20°C to 60°C, however they may deplete more rapidly at
the higher temperature ranges. It is recommended to store batteries within normal
room temperature ranges.
Warranty
The following items covered under Unitech Limited Warranty are free from defects
during normal use:
•
•
PA600 – 1-year limited warranty.
Lithium-Ion battery – 6-month limited warranty.
The warranty becomes void if the equipment is modified, improperly installed or used,
damaged by accident or neglect, or if any parts are improperly installed or replaced by
the user. Use only the AC Adapter supplied. Using the wrong AC Adapter may dam-
age the unit and will void the warranty.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Preface
About This Manual
i
Regulatory Compliance Statements .................................................................... i
FCC Warning Statement...................................................................................... i
FCC Label Statement ......................................................................................... ii
Canadian Compliance Statement....................................................................... ii
European Conformity Statement ........................................................................ ii
RoHS Statement................................................................................................. ii
Taiwan NCC Warning Statement........................................................................ ii
Laser Information................................................................................................. iii
Battery Notices..................................................................................................... iii
Battery charge notice......................................................................................... iv
Storage and safety notice.................................................................................. iv
Warranty ............................................................................................................... iv
Chapter 1
Getting Started
1
Introducing the PA600.......................................................................................... 1
Features................................................................................................................. 2
Package Contents................................................................................................. 3
A Tour of the PA600.............................................................................................. 4
Front View........................................................................................................... 4
Back View........................................................................................................... 5
Getting Started...................................................................................................... 6
Installing the Battery ........................................................................................... 6
Charging the Battery........................................................................................... 8
Charging the Battery Using the USB Cable ....................................................8
Charging the Battery with the Docking Station ...............................................9
Checking the Battery Status ...........................................................................9
Connecting the PA600 to a PC......................................................................... 10
Turning PA600 on for the First Time................................................................. 11
Powering On .................................................................................................11
Using the Stylus ............................................................................................12
Calibrating the PA600 Screen ......................................................................13
Setting the Date and Time ............................................................................15
Chapter 2
Using the Hardware
16
Keypads and Function Buttons......................................................................... 16
Adjusting the Screen Brightness ...................................................................... 18
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the SD/MMC memory card ...................................................................... 18
Inserting a Storage Card ..............................................................................18
Removing a Storage Card ............................................................................19
Using the Laser Scanner.................................................................................... 19
Using the RFID HF Reader ................................................................................. 22
Chapter 3
Getting Connected
24
Establishing Device-PC Connection................................................................. 24
Installing Microsoft ActiveSync ......................................................................... 24
Connecting the Device to Your Computer ........................................................ 27
Synchronizing with Your Computer.................................................................. 29
Connection options........................................................................................... 29
USB Connection ...........................................................................................29
Bluetooth Connection ...................................................................................31
WiFi Connection ...........................................................................................35
Synchronizing Information ................................................................................ 37
Synchronization Options................................................................................... 37
Using ActiveSync to Exchange Files................................................................ 37
Chapter 4
Bar Code Scanner Programs
39
Scanner Setting................................................................................................... 39
Scan2Key............................................................................................................. 39
Bar Code Symbologies (1D bar Code) ............................................................. 40
Bar Code Symbologies (2D bar Code) ............................................................. 40
Chapter 5
Advanced Settings
41
Adjusting Settings .............................................................................................. 41
Checking Main and Backup Battery Status...................................................... 42
Extending Battery Life........................................................................................ 43
Changing the Automatic Power Settings .......................................................... 43
Adjusting Backlight Setting ............................................................................... 44
Viewing Flash Memory Files.............................................................................. 45
Performing a hardware reset ............................................................................. 46
Performing a Warm Boot .................................................................................. 46
Performing a Cold Boot .................................................................................... 47
Appendix
System Specification
48
49
Worldwide Support
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Getting Started
Introducing the PA600 MCA
The PA600 MCA (Mobile Clinical Assistant) was designed for
users who need a compact and rugged mobile computer for data
collection in real time transactions. This compact and lightweight
device incorporates a Windows CE 5.0 operating system, a laser
bar code scanner and an RFID Reader. In addition, the PA600
contains a 3.5-inch QVGA color touch-screen, keypad and wire-
less communication capability.
unitech
To reduce total cost of ownership, the PA600 is sealed to meet
IP64 standards and can withstand multiple 4-foot drops to con-
crete. Thanks for purchasing the PA600 Rugged Enterprise PDA.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Internal System
Audio
•
Microsoft Windows CE 5.0 Profes-
sional Plus Operating System.
520 Mhz Intel PXA270 Processor.
•
•
•
•
Microphone.
Speaker.
Headset Connector.
Receiver.
•
System Memory
Wireless Connectivity
•
•
128 MB SDRAM.
320 MB Flash ROM.
•
•
IEEE 802.11b/g.
Bluetooth.
Display
Expansion Slot
Accommodates Secure Digital
•
•
3.5” QVGA LCD Touch-screen.
240 x 320 Pixel Resolution.
•
(SD) Memory Cards and can Serve
as an SDIO Port.
Bar Code Scanner
•
•
Built-in 2D Bar Code Scan Engine.
Built-in Vibration.
Battery System
•
•
•
3.7V 2200mAH Lithium-Ion Battery
Pack.
Charging Time: Less Than five-
Hours.
Embedded Backup Battery Cell.
RFID HF Reader
•
•
Built-in RFID HF Reader.
HF 13.56Mhz Supports ISO 15693
and ISO 14443A/B.
User-friendly Interface
Communication
•
Quick Launch Hot Keys for
•
•
•
USB Host & Client.
802.11b/g.
Bluetooth 1.2 Class 2
(Supports Bluetooth Printer,
Bluetooth Modem and Bluetooth
ActiveSync).
Enabling Backlight, Calibration,
Software Keyboard, and Other
Device Management Tasks.
Trigger Keys for Bar Code Scan-
ning.
•
2
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting Started
Package Contents
Ensure the following items are in the PA600 MCA box:
unitech
AC Adapter with Universal
Plugs
PA600 Terminal
Battery Pack
Stylus
USB Charging Cables
Elastic Stylus String
Unitech CD-ROM
If anything appears missing or damaged, please contact a local Unitech representa-
tive.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
A Tour of the PA600
Front View
8
1
7
6
2
3
4
5
No. Component
Description
1.
Status Indicator.
Indicates battery charging and bar code scanning status.
Green - Battery is fully charged, or bar code
scanning is successful.
Red - Battery is charging, bar code scanner is
operating.
2.
3.
Left Scanner
Trigger Button.
Press to activate the Laser Bar Code Scanner.
Power Button.
Press to start the PA600. Also, press this button down
for at least three seconds to turn the PA600 off.
4.
5.
Microphone.
Records audio.
Universal
Connects the PA600 to a USB Charging/
Connector.
Communication Cable. This USB cable connects to
the computer’s USB Port and accepts the 5V AC
Adapter to provide power to the PA600.
This unit can simultaneously recharge and perform a
Microsoft ActiveSync operation. In addition use it to
connect peripheral hardware, such as a docking
station. This port can also support USB and RS232
hosting for devices such as a USB or RS232 scanner,
keyboard or USB memory key.
6.
7.
8.
Keypad.
LCD Touch-screen. Displays applications and data on the PA600. It is touch-
sensitive and responds to the Stylus or finger.
Speaker.
Enables audio from the PA600.
4
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting Started
Back View
9
10
11
12
13
14
15
16
17
18
No. Component
Description
9.
Battery
Compartment.
Houses the removable and rechargeable 3.7V 2200
mAH Battery Pack.
10. Battery
Compartment
Opens the Battery Compartment.
Release Latch.
11. Reset Button.
Press the Stylus into the PA600’s Reset Button to
Clean Boot the device.
12. Handstrap.
13. Speaker.
14. Stylus.
Enables users to securely hold the PA600.
Enables audio from the PA600.
Enables users to interact with the operating system. To
use the Stylus, remove it from its holder and hold it like a
pen or pencil.
15. Strap Holder.
Secures the handstrap.
16. Memory Card Slot.
Accommodates Secure Digital (SD) memory cards
and can serve as a SDIO port.
17. Bar Code Scanner
Window.
Scans bar codes.
18. RFID Antenna.
Receives the radio frequency signals.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Install and charge the battery, check the battery status, turn on the PA600 and cali-
brate the PA600’s screen through the following:
Installing the Battery
WARNING!If the Battery Pack is handled improperly there is risk of fire and/or
burns. Do not disassemble, crush, puncture, short external contacts,
or dispose the battery pack in fire or water. Do not attempt to open or
service the battery pack. Dispose of used batteries according to local
recycling guidelines.
A Backup Battery cell is embedded in the PA600 to prevent data loss when the remov-
able Battery Pack disconnects from the PA600. The Backup Battery will maintain data
and system settings for up to 6 hours.
NOTE: Initially charge the Main Battery for at least 16 hours to provide the bat-
tery with enough power.
1. Access the Battery Compartment by pushing the Battery Compartment Cover
Latch in the direction as shown below:
Components of the Battery Compartment are highlighted below:
Compartment Contacts
Plastic Battery Tab
Battery Hook
NOTE: Do not remove the Plastic Battery Tab, it is useful for removing the Bat-
tery.
6
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting Started
2. Locate the Backup Battery Switch in the Battery Compartment, and use a Sty-
lus to move it to the left in the ON position.
Backup Battery
Switch
3. Position the Battery so the Battery Contacts align with the Battery Compartment
Contacts. Place the Battery on top of the Plastic Tab as shown below:
Contacts
Plastic Tab
4. Simultaneously slide the Battery Pack into the Battery Compartment while pull-
ing the Battery Hook until the battery snaps into place as shown below:
Battery Hook
5. Replace the Battery Compartment Cover.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
Charge the PA600 for at least 16 hours prior to initial use. After the initial charge, the
PA600 will recharge to full capacity in about 4 hours. Only use the PA600 USB Charg-
ing Cable or the PA600 Cradle for charging the device.
CAUTION! Operating the PA600 for the first time without the AC Adapter, and
without fully charging the Backup Battery may result in RAM memory
data loss. When the Main Battery is removed, the Backup Battery
retains RAM data for 2 hours. Charge the battery within this time
period to avoid data loss
NOTE: Turn the Backup Battery switch to the ON position before charging the
Battery. Data loss may occur if the Backup Battery is not properly
charged.
Charging the Battery Using the USB Cable
1. Press and hold the USB Charging Cable’s Release Buttons while connecting to
the PA600 (1).
2. Plug the AC Adapter Cable into the USB Charging Cable’s power jack (2).
3. Plug the other end of the AC Adapter Cable into an electrical outlet (3).
3
2
1
8
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting Started
Charging the Battery with the Docking Station
1. Plug the AC Adapter Cable into the Docking Station’s power jack, and connect
the other end of the AC Adapter into an electrical outlet.
2. Slide the PA600 down into the Docking Station until it
unitech
snaps into place.
3. The connection is secure when the PA600’s bottom
edge aligns with the Cradle. (The PA600’s LED indica-
tor lights up red).
LED Status
LED
Meaning
PA600
Solid Red
Solid Green
Charging.
Charging Complete.
Power is On.
Docking
Station
Power LED
Charging LED:
Sync LED
Charging (For Spare Battery Only).
Synchronization is Occurring.
Checking the Battery Status
If the battery level becomes low during the course of normal use, a status icon
appears on the PA600’s screen indicating low or very low battery status. In both
cases, perform a Microsoft ActiveSync operation to backup data, and recharge the
PA600 as soon as possible. If the battery level reaches low status, the device will
enter a sleep mode and cannot power up until the battery is charged, or until the
PA600 connects to an external power source.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the PA600 to a PC
Connect the PA600 to a PC with the USB Cable through the following:
NOTE: Connect the PA600 with an external power supply while synchronizing.
1. Press and hold the USB Charging Cable’s Release Buttons while connecting to
the PA600 (1).
2. Connect the USB Charging Cable to the PC/Notebook’s USB Port and plug the
AC Adapter Cable into the USB Charging Cable’s power jack (2).
3. Plug the other end of the AC Adapter into an electrical outlet (3).
2
3
1
10
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting Started
Turning PA600 on for the First Time
Charge the PA600 for at least 16 hours prior to initial use. Start the PA600, calibrate
the display, learn some basic Stylus usage, and setup the date and time through the
following:
Powering On
1. Start the PA600 by pressing the
Power Button on the front panel.
NOTE: The PA600’s screen ships
with a protective plastic film.
Remove the plastic film by
peeling from one corner to
another. The screen will be
more susceptible to scratch-
ing without the film, but it will
be more legible.
2. The Unitech PA600 welcome
Power Button
screen appears for a moment fol-
lowed by the Windows Mobile
screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Stylus
CAUTION! Never use anything other than the PA600 Stylus on the PA600’s
screen. Using an object other than the PA600 Stylus could cause per-
manent damage.
1. Remove the Stylus from its holder.
2. Hold the Stylus like a pencil.
3. Lightly tap the tip of the Stylus to make a menu choice.
4. Use the Stylus to print letters or numbers into a field or on a form.
12
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting Started
Calibrating the PA600 Screen
The calibration screen automatically appears when the PA600 powers on for the first
time or after the system is reset. Calibrate the screen at any time through the
following:
1. Tap Start → Settings → Control Panel.
2. Double-tap Stylus. The Stylus Properties win-
dow appears.
NOTE: Or, simultaneously press FUNC and
ESC.
3. Tap the Calibration tab.
4. Tap Recalibrate to calibrate the screen. The
align screen window appears.
5. Tap the target firmly and accurately.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The target moves to the next location.
6. Continue tapping the target until calibration is
complete.
7. Press ENTER to accept the new calibration
settings or ESC to retain the old settings.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Getting Started
Setting the Data and Time
Set Date and Time
In the Date/Time Properties window, use the
stylus to select the current date and time, time
zone, and daylight saving time option.
Set Date
•
Tap the left or right arrows to scroll
through the year and month, or tap
the year and month to select the set-
ting.
•
•
•
Tap on the Hr/Min/Sec/AM/PM to
input the Hr/Min/Sec and set the time.
Tap the arrow and set the correct time
zone from the drop down menu.
Check the box to enable Windows to
automatically adjust for daylight
saving time.
•
Tap OK to save the settings and exit
the Date/Time Properties dialog or tap
X to exit without saving.
Set Time
Set Time
Zone
To change the time and date at any time tap
→ Settings → Control Panel → Double-
tap Date/Time.
Set
Daylight
Saving
Time
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Using the Hardware
Keypads and Function Buttons
The keypad enables users to enter data and interact with the operating system. The
FUNC button activates secondary key functions.
Press
and a Fn icon appears on the PA600’s
taskbar.
Function Activated Icon
The following table describes the keypad keys.
Key
Main Function
Secondary Function
Turns the PA600 on and off.
—
Number 1.
Alphanumeric 2, a, b and c.
Alphanumeric 3, d, e and f.
Enter key.
Up navigation key.
OK.
16
Copyright 20086 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Using the Hardware
Key
Main Function
Secondary Function
Backspace.
Escape key.
Alphanumeric 4, g, h and i.
Alphanumeric 5, j, k and l.
Left navigation key.
—
Alphanumeric 6, m, n and o.
Right navigation key.
Enables/disables secondary
function keys.
—
Tab.
Windows key opens Start menu.
Decreases screen brightness.
Alphanumeric 7, p, q, r and s.
Alphanumeric 8, t, u and v.
Down navigation key.
Alphanumeric 9, w, x, y and z.
Increases screen brightness.
Alpha.
—
Asterisk.
Illuminates keypad.
Number 0 and space.
Period.
—
Pound and Slash.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Screen Brightness
Adjust the screen brightness by pressing
FUNC to enable the secondary key func-
tion and press 7 (decrease brightness) or
9 (increase brightness).
Increase
Brightness
Decrease
Brightness
Function Button
Using the SD/MMC memory card
The PA600’s expansion slot is compatible with a range of SD and MMC storage cards,
which are primarily used to backup or transfer files and data. The expansion slot also
supports SDIO cards for additional connectivity options.
Inserting a Storage Card
1. Remove the SD Compartment Cover by rotating the screws counterclockwise
with a screwdriver as shown below:
2. Insert the SD Card with the notched end facing up and into the slot as shown
below:
18
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Using the Hardware
3. Replace the SD Compartment Cover with the four compartment screws.
Removing a Storage Card
1. Remove the SD Compartment Cover by rotating the screws counterclockwise
with a screwdriver.
2. Press the card in, and release. The card should automatically release.
3. Remove the SD Card from the slot.
4. Replace the SD compartment cover and the four compartment screws.
Using the Laser Scanner
The PA600 has an integrated laser scanner that reads all major bar code labels.
NOTE: Reading software must be enabled in order to operate the scanner. This
can be a user loaded application or a preload utility such as Scanner
Settings and Scan2Key.
Test the PA600’s bar code scanner through the
following:
Scan Button
unitech
19
Download from Www.Somanuals.com. All Manuals Search And Download.
1. To launch the Scanner Settings, tap Start
→ Settings → Control Panel → double-
tap Scanner.
2. The Scanner Control Panel opens.
In the Scanner Control Panel screen, it is possible to configure bar code scan-
ner parameters such as enabling or disabling bar code symbologies, set data
transmission options, configure magnetic and proximity reading options and set
power management options.
3. To test the bar code scanner, tap the Test
tab.
4. Tap Tools → Enable Scan.
5. To perform an auto-scan, tap Tools → Auto
Scan → Start Auto-Scan.
6. Input an interval. The default value is three
seconds. Tap Start. The laser scans every
three seconds and the bar code automati-
cally scans.
7. To stop the auto-scan, tap Tools → Auto-
Scan → Stop Auto-Scan.
20
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Using the Hardware
8. Enable Scan2Key.exe to enable the scan-
ner outside of the test tab.
This can be done under the To Kpd tab.
Check the box labeled Start Scan2Key
When Exit. Tap OK.
9. The scanner is enabled and each bar code
scan will be directed to the keypad buffer,
once the Scan2Key icon appears on the
PA600’s taskbar.
Scan2Key Icon
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RFID HF Reader
The PA600 has a built-in RFID High Frequency Reader that allows users to read vari-
ous types of RFID cards. The RFID scanning area is shown below:.
RFID Antenna
PA600 RFID HF
unitech
u
RFID Tag
Execute an RFID card reading with the PA600 through the following:
Bring an RFID tag near the PA600’s RFID antenna.The RFID demo program is pre-
installed in the PA600.
Launch the RFID demo program through the fol-
lowing:
1. Tap Start → Programs → RFID_HF →
RFID_HF.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Using the Hardware
2. Select a card type: 15693, 14443A or
14443B. Tap Start to activate the RFID
reader.
3. Bring a tag close to the RFID antenna.
The tag is read into the field.
Select the Beeper check box to enable a
beeping sound when an RFID tag is read.
Select the Inventory check box to limit an
RFID tag to be read once.
4. Tap Stop, to stop the RFID tag readings.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Getting Connected
Establishing Device-PC Connection
Installing Microsoft ActiveSync
Microsoft ActiveSync must be installed on the computer in order to exchange information
between the computer and the PA600. Microsoft ActiveSync is already installed on the
PA600. Use the PA600’s USB Charging Cable or the docking station to connect the
PA600 with a computer.
NOTE: If a previous version of Microsoft ActiveSync is installed on the computer,
uninstall it first, before installing the latest version of Microsoft ActiveSync.
The PA600 Rugged Enterprise PDA requires Mircosoft ActiveSync version
4.2 or higher.
Install Microsoft ActiveSync on the computer through the following:
1. Close any open programs, including those that run during startup, and disable any
antivirus software.
2. Download the ActiveSync software from the Microsoft ActiveSync Download
activesync45.mspx
3. Browse the location of the downloaded file, and double-click it.
The installation wizard begins.
24
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Getting Connected
4. Click Next.
The End User License Agreement (EULA) appears.
5. Accept the license agreement terms and click Next.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill out the information fields.
6. Type the user name and organization and click Next.
Select the folder destination.
7. Select a drive to install the program and click Next.
The installation wizard gathers all the information it needs to install Microsoft
ActiveSync and prompts users to begin the installation.
26
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Getting Connected
8. Click Install.
The program begins the installation.
After the program finishes installing, the following screen appears.
9. Click Finish.
Restart the computer after installing Microsoft ActiveSync. The Microsoft ActiveSync
icon
appears in the computer's system tray and the Connection Wizard automati-
cally starts. For details on how to use Microsoft ActiveSync on the computer, start
Microsoft ActiveSync then click Help → Microsoft ActiveSync Help.
Connecting the Device to the Computer
1. After Microsoft ActiveSync installs, connect the USB Charging Cable to the Uni-
versal Connector on the bottom of the device. If necessary, connect an Adapter.
2. Plug the other end of the USB Charging Cable into the computer’s USB Port.
3. Start the PA600.
4. Microsoft ActiveSync starts automatically and configures the USB Port to work
with the PA600. The New Partnership setup wizard automatically starts.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: If Microsoft ActiveSync doesn’t start automatically, click Start → Pro-
grams → ActiveSync.
NOTE: If a message appears indicating that it is unable to detect a connection,
click Cancel and manually configure the communication settings on the
PC by clicking MAS → File → Connection Setting → Connect Device.
5. Follow the onscreen instructions.
6. The Microsoft ActiveSync win-
dow appears once the configura-
tion process is complete.
7. Synchronization will initiate, and it will synchronize periodically or upon connec-
tion.
NOTE: A PC can partner with multiple PA600’s. But, a PA600 can only partner
with up to two computers.
28
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Getting Connected
Synchronizing with the Computer
Synchronization occurs according to the options setup in Microsoft ActiveSync via the
computer. Accepting the default (On Connect) synchronization option in the Microsoft
ActiveSync Setup Wizard enables users to simply connect the PA600 to the desktop
computer and synchronization will automatically occur.
If the On Connect feature in Microsoft ActiveSync is not selected, start Microsoft
ActiveSync through either of the following:
•
•
On the computer, double-click My Computer → Mobile Devices folder.
Connect the USB Cable between the computer and PA600.
Connection Options
Set remote synchronization with the computer through following connection options:
•
•
•
USB connection.
Bluetooth connection.
Wi-Fi connection.
USB Connection
Synchronize the computer via a USB connection through the following:
1. Connect the PA600 to a computer using the USB Charging Cable.
2. Initiate the connection by tapping Start → Set-
tings → Control Panel → double-tap PC
Connection.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Check Enable direct connections to the
desktop computer.
4. Tap OK.
5. Tap Start → Programs → Communication
→ PC Link. The USB Status window appears.
Tap Hide to hide the window. Tap Cancel to
disconnect.
30
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Getting Connected
Bluetooth Connection
The PA600 is equipped with Bluetooth wireless technology that can synchronize infor-
mation with a computer equipped with a Bluetooth adapter or access point. Bluetooth
wireless technology communicates with the computer whenever it is within range.
Setup a Bluetooth connection through the following:
1. Tap Start → Programs → Bluetooth →
BTPowerON.
2. Check Bluetooth Module Power On.
Tab OK.
3. Tap Start → Settings → Control Panel →
double-tap Bluetooth Device Properties.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Tab Scan Device. Choose a device from the
list and select Trusted.
5. Users are prompted for a passkey. Enter the
Passkey.
6. On the PC screen, enter the Bluetooth PIN
Code Request. Enter the same Bluetooth PIN
Code that was entered in the last step.
32
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Getting Connected
7. On the PA600 select a device from the list and
select Active.
8. On the PC, double-click Microsoft
ActiveSync. Click File → Connec-
tion Settings. Select a BT COM
port, and click OK.
9. On the PA600, tap Start → Pro-
grams → Bluetooth → BTActiveSync.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
10. The BTActiveSync icon appears on the
taskbar. Tap the icon, and the Bluetooth
ActiveSync window appears.
BTAciveSync Icon
11. Tap More.
12. Tap Inquiry, select the desired Bluetooth
device to sync. Tap OK.
13. Tap the BTActiveSync icon again. Tap
Sync. Bluetooth ActiveSync begins.
34
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Getting Connected
Wi-Fi Connection
Unitech terminals come with a built-in RF facility. Setup an RF facility through the fol-
lowing:
1. Double-tap the RF icon on the taskbar.
RF Icon
2. Under the Wireless Information tab, double-
tap Add New....
3. Enter the SSID. For example, UTE.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Open, in the Authentication: drop
down menu.
5. Select WEP, in the Encryption: drop down
menu.
6. Uncheck The key is provided automati-
cally. Enter the Network Key. Tap OK.
Start to search for an RF signal once the net-
work is connected.
36
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronizing Information
Every file created on the PA600 is stored in the My Document/PA600 My Document
folder (only if the device name is PA600). View files by double-clicking the PA600 My
Documents icon on the computer.
The PA600 files are automatically synchronized in the My Documents folder on the
computer, but only if the file synchronization is enabled. (Unless a different name is
chosen for the PA600.)
Synchronization Options
Synchronization options can modify, including when and what gets synchronized. In
the Mobile Device window on the PC, click Tools → Sync Options.
For every type of information, synchronization can slow down by restricting the
amount of synchronized data. To do this, select a service and click Settings. After
enabling a service, close and reopen Microsoft ActiveSync.
Use Microsoft ActiveSync to Exchange Files
Use Microsoft ActiveSync to exchange information from the PA600 to the computer
and vice versa. Information changes made in one location will not impact information
in the other. Synchronize the information to automatically update information on both
the PA600 and the computer.
It is possible to copy two types of information to the PA600: Files and Pocket Access
Windows CE Store information.
The following procedure only applies to copying files. Refer to the computer’s Micro-
soft ActiveSync Help menu for instructions on how to copy Pocket Access Windows
CE Store information.
NOTE: Files created on the computer may need to convert via Microsoft Active-
Sync, so that they can be viewed and edited on the PA600 and vice
versa.
Copy files through the following:
1. Connect the PA600 to a computer.
2. In Microsoft ActiveSync on the
computer, click Explore
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows Explorer opens the PA600’s Mobile Device window.
3. Locate the desired file to copy on the PA600 or computer.
4. Do one of the following:
– To copy the file to the PA600, right-click the file and click Copy. Place the cur-
sor in the desired folder for the device, right-click, then click Paste.
– To copy the file to the computer, right-click the file and click Copy. Place the
cursor in the desired computer folder, right click, then click Paste.
38
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Bar Code Scanner Programs
Scanner Setting
When it is necessary for the user to change the default bar code symbology for a dif-
ferent application, the Scanner Control Panel provides the ability to change the default
symbology, place delimiter characters behind scanned data and save scanner set-
tings.
Tap Start → Settings → Control Panel → Scanner.
The Scanner Control Panel appears.
NOTE: Alternatively, Press Func and 7 to
access the Scanner Control Panel.
Scan2Key
User’s can populate bar code scan data into any program of choice with the
Scan2Key application. Scan2Key routes input from a scanner port to a keypad buffer,
making all input from the scanner emulate input from the keypad. Using Scan2Key,
scanned data will move from the scanner port to any waiting (active/focused) text edi-
tor such as MS Mobile Word or a text box application.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Bar Code Symbologies (1D Bar Code)
Check
Transmit
Bar Code
Symbology
Enable/
Disable
Max/Min
Length
Char/Digit Check
Other
verification Char/digit
Codabar
YES
YES
YES
YES
Transmit STSP, STSP
Caps
Code 128
Code 39
YES
YES
YES
YES
YES
YES
For ASCII, Transmit Start
& Stop Bits
Code 93
EAN 128
Interleaved 2 of 5 YES
YES
YES
YES
YES
YES
YES
Transmit GS
YES
YES
YES
JAN/EAN/UPC
YES
Transmit Short Check Char/
Digit, Transmit UPCA Check
Char/Digit, Transmit UPCA
Number, Transmit UPCE
Check Char/Digit, Transmit
UPCE Number, Convert
UPCE to UPCA, Zero
Expansion
RSS
YES
YES
RSS Expanded, RSS
Stacked, RSS Limited,
RSS14, RSS14 Stacked
Bar Code Symbologies (2D Bar Code)
Check
Transmit
Bar Code
Symbology
Enable/
Disable
Max/Min
Length
Char/Digit Check
Other
verification Char/digit
Composite
YES
YES
UPC Composite,
RSS Composite,
Only linear Code,
EAN 128 EM Mode
Rectangle,
Data Matrix
MaxiCode
YES
YES
YES
YES
Negative
Mode 0 ~ 5,
Not Only Primary
PDF-417
Postal Code
YES
YES
YES
YES
Australian post, Japan
post, KIX, Planet, Postnet,
Royal Mail, UPU,
USPS4CB, Decode
Postnet with B and B’
Fields, Issue Zero FCC
Australia Post Codes
QR Code
YES
YES
Negative
40
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Advanced Settings
Chapter 5
Advanced Settings
Adjusting Settings
Adjust the PA600 settings to accommodate personal work habits through the follow-
ing:
To access Settings, tap Start → Settings → Con-
trol Panel.
The Control Panel screen appears where users
can adjust the backlight, auto power off timer, sys-
tem volume and processor speed. In addition,
users can assign button functions, configure
menus, enter owner information and setup connec-
tions.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Main and Backup Battery Status
Check the main and backup battery status through the following:
1. Access the Properties Window through the following:
– The Plug or Battery icon appears on the
PA600’s taskbar when the device is charg-
ing, or when the Battery reaches below 10
percent capacity. Double-tap the icon to
access the Power Properties window.
Battery Icon
– Tap Start → Settings → Control Panel →
double-tap Power.
NOTE: Alternatively, press Func and 8 to
access the Power Properties window.
42
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Advanced Settings
The Power Properties window appears.
2. The Battery tab displays the External (Main)
and Backup battery capacity status.
For example, the screenshot on the right
shows both batteries are in “Good” condi-
tion.
NOTE: Charge the Backup Battery when it
reaches “Low” or “Very Low” battery
status. If the battery does not accept
a charge, contact Unitech Technical
Support.
Extending Battery Life
Extend the PA600’s battery life by doing either of the following:
•
•
Change the automatic power settings.
Minimize backlight use.
Changing the Automatic Power Settings
The PA600 enters idle mode when there is no task, or all tasks are waiting for input. In
the default setting, the PA600 automatically turns off when it remains idle for three
minutes without an external power source. Pressing the power button returns the
PA600 to the same point at the time of automatic shutdown.
Change the automatic power settings through the following:
1. In the Power Properties window tap the Schemes tab.
2. Tap the arrows from the drop down menus to
select time periods for Switch state to User
Idle:, Switch state to System Idle: or
Switch state to Suspend:. The available
time periods are 1, 2, 3, 4, 5, 10, 30 minutes
and never.
3. This function can also activate when the
PA600 is plugged into the AC Adapter or
placed in its docking station. Select AC
Power from the Power Scheme: drop down
menu, and select a time period from the
drop down menus. The available time peri-
ods are 1, 2, 5,10, 15, 30 minutes and never.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Backlight Setting
The PA600’s LCD backlight consumes a large amount of battery power, only use this
function if it is necessary.
If a backlight is required, set “automatically turn off the backlight” function.
Change the backlight settings through the following:
1. Tap Start → Settings → Control Panel.
2. Double-tap Backlight, and the Backlight
screen appears.
3. Do any of the following:
– Select Battery Power, tap the Dim Back-
light if device is not used for: check box
and select the amount of time from the
drop down menu before the backlight dims
while running in battery power mode.
– Select External Power, tap the Dim
Backlight if device is not used for:
check box and select the amount of time
from the drop down menu before the back-
light dims while running in external power
mode.
– Tap the Turn on Backlight when... check-
box to activate the backlight when the key-
pad is pressed or the screen is tapped.
44
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Advanced Settings
– To set the intensity, tap and drag the slider
to set the backlight On Intensity and Dim
Intensity.
Viewing Flash Memory Files
The Flash Storage folder is a rewritable location for programs or data files. The benefit
of this feature is that files and programs saved in Flash Storage are unaffected by the
PA600 power status.
Access Flash Memory files through the following:
1. On the PA600, double-tap My Device, double-tap Flash Storage.
Transfer files to the Device’s Flash Memory through the following:
2. In Microsoft ActiveSync window on the computer, click Explore. To copy the file
to the PA600, right-click the file and click Copy. Place the cursor in the PA600’s
flash storage folder, right-click, and click Paste.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing a hardware reset
Perform a reset if the PA600 freezes (i.e., no longer responds).
Performing a Warm Boot
A Warm Boot allows the PA600 to get a fresh start, similar to rebooting a computer.
This will restart the PA600 and adjust memory allocation. All records and entries are
retained after a Warm Boot. However, unsaved data in open programs may be lost in
some cases.
1. Remove the stylus from its holder.
2. Lightly press the tip of the Stylus into the Reset Button on the PA600’s back
panel.
Reset Button
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Advanced Settings
Performing a Cold Boot
A cold boot cuts off power from the PA600, erasing all records and entries, deleting all
added programs, and restoring the PA600 to default factory settings.
Data and time settings are not retained in a cold boot while formats, preferences and
other settings restore to their default factory settings. Not even data stored in Flash
Storage is retained.
NOTE: Only perform a hard reset unless a soft reset does not correct the prob-
lem. Data can restore through the next Microsoft ActiveSync operation,
or it can transfer from a storage card.
Perform a cold boot through the following:
1. Press and hold the FUNC and TAB.
2. While holding FUNC and TAB, insert
the tip of the Stylus into the Reset But-
ton on the PA600’s back panel. Press
and hold the Reset Button until the
Unitech logo appears onscreen. Wait
five seconds and then release FUNC
and TAB.
NOTE: The system returns to the default settings. All registry settings and all
files (including hidden files) return to their original factory defaults.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
System Specification
Processor/Memory
CPU
520Mhz Intel PXA270
Memory
SDRAM: 128 MB
Flash ROM: 320 MB
OS
Windows CE 5.0 Professional Plus
Keypad
18-Key (Including Numeric Key, Alpha Key
and Function Key)
Display
240 x 320 Pixel QVGA, Color Transflective
TFT, with Touch-screen & Backlight
Scanner
2D Bar Code Scanner
RFID HF reader
HF 13.56Mhz
ISO 15693, ISO 14443A/B
Indicator
LED, Vibration
Communication
USB Host & Client
802.11b/g
Bluetooth 1.2
Bluetooth Supports Bluetooth Printer,
Bluetooth Modem, Bluetooth ActiveSync
Audio
MIC, Speaker, Headset Connector, Receiver
Expansion Slot
Power Source
SDIO Slot
Main
3.7V 2200mAH Lithium-Ion Battery
Pack
Backup
Rechargeable Ni-MH Backup Battery
11.1 oz. (315g) with Battery
Enclosure
Weight
Dimension
5.8”L x 1.3”H x 3.3”W
(149.5mmL x 35.5mmH x 85mmW)
Environmental
Operating Temperature
Storage Temperature
Charging Temperature
Relative Humidity
14° F - 122° F (-10° C - 50° C)
-4° F - 140° F (-20° C - 60° C)
50° F - 133° F (10° C - 45° C)
5% - 95% (non-condensing)
4’
Drop Test to Concrete
Environmental Sealing
IP64
Antimicrobial Casting/Protection
Models
RFID HF + 802.11b/g + BT
802.11b/g + BT
Certification
Accessories
Software
CE, FCC, BSMI, VCCI, CCC, RoHS
Compliant
Battery Charger, Desktop Cradle, Modem
Cradle, Multi-bay, Holster
Unitech Software Development Kit
Oracle Database Lite
Wave Link Avalanche
Microsoft BizTalk Server 2006 R2
48
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Worldwide Support
Appendix
Worldwide Support
Region
Web site
Global Operation Center
Unitech Taiwan
adc-utt.unitech.com.tw
Unitech Asia Pacific & Middle
Unitech China
Unitech Japan
Unitech America
Unitech Latin America
Unitech Europe
latin.ute.com
49
Download from Www.Somanuals.com. All Manuals Search And Download.
|
