Uniden Telephone FP102 User Manual

FP102  
Hands Free Speaker Phone  
with Pre-Programmed 5+15 Memory  
Operating Guide  
FeaturePhone Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Caring for your Telephone . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Parts Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Parts Checklist (For New Zealand Model) . . . . . . . . . . . . . .7  
Parts Checklist (For Australian Model) . . . . . . . . . . . . . . . . .8  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Handset Cord Connection . . . . . . . . . . . . . . . . . . . . . . . . .13  
Telephone Line Cord Connection . . . . . . . . . . . . . . . . . . . .13  
Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Using your FP102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Memory Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Storing One-Touch Speed Dial Memories . . . . . . . . . . . . . .15  
Memory Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Dialing Stored Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Chain Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Adjusting the Ringer Volume Control . . . . . . . . . . . . . . . . .17  
Adjusting the Ringer Tone Control . . . . . . . . . . . . . . . . . . .17  
Adjusting the SpeakerPhone Volume Control . . . . . . . . . . . .17  
LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Placing a Telephone Call . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Receiving a Telephone Call . . . . . . . . . . . . . . . . . . . . . . . .18  
Accessing Call Waiting (New Zealand Model only) . . . . . . .18  
Accessing Call Waiting (Australian Model only) . . . . . . . . . .19  
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Placing a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Music on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
SpeakerPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Using the Pre-Programmed Feature Buttons  
(New Zealand Model only) . . . . . . . . . . . . . . . . . . . . . . . .20  
Using the Pre-Programmed Feature Buttons  
(Australian Model only) . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
New Zealand Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Australian Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
When using your telephone equipment, basic safety precautions should always be  
followed to reduce the risk of fire, electrical shock, and injury to persons,  
including the following:  
1. Read and understand all instructions.  
2. Follow all warnings and instructions marked on the product.  
3. Unplug this product from the wall outlet before cleaning. Do not use  
liquid cleaners or aerosol cleaners. Use a soft damp cloth for cleaning.  
4. Do not use this product near water; for example, near a bath tub,  
wash bowl, kitchen sink or laundry tub, in a wet basement, or near a  
swimming pool.  
5. Do not place this product on an unstable cart, stand, or table.  
The telephone may fall, causing serious damage to the unit.  
6. Slots and openings in the cabinet and the back or bottom are provided  
for ventilation. To protect the product from overheating, these openings  
should never be blocked or covered. This product should never be  
placed near or over a radiator or heat register. This product should  
not be placed in a built-in installation unless proper ventilation is provided.  
7. Never push objects of any kind into this product through cabinet slots,  
as they may touch dangerous voltage points or short out parts that  
could result in a risk of fire or electrical shock. Never spill liquid of any  
kind on the product.  
8. Do not disassemble this product. Take it to qualified service personnel  
when service or repair work is required. Opening or removing covers may  
expose you to dangerous voltages or other risks. Incorrect re-assembly can  
cause electrical shock when the appliance is subsequently used.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
9. Unplug this product and refer servicing to qualified service personnel  
under the following conditions:  
A. If liquid has been spilled into the product.  
B. If the product has been exposed to rain or water.  
C. If the product does not operate normally when following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions. Improper adjustment of  
other controls may result in damage, and will often require  
extensive work by a qualified technician to restore to normal operation.  
D. If the product has been dropped, or the cabinet has been damaged.  
E. If the product exhibits a distinct change in performance.  
IMPORTANT NOTES  
We have designed your telephone to conform to local regulations, and you can  
connect it to most telephone lines. However, each device that you connect draws  
power from the phone line. We refer to the power drawn as the devices Ringer  
Equivalence Number (REN or RN). This number is shown on the bottom of your  
telephone. If you are using more than one phone or other device on the line,  
add up all the REN’s. If the total is more than three, your phones may not ring.  
NOTE: You must not connect your phone to any of the following:  
Coin operated systems  
Party-line systems  
Most electronic key phone systems  
CARING FOR YOUR TELEPHONE  
Clean your telephone using a soft damp cloth.  
Do Not Use solvents, detergents, sprays, abrasive pads,  
scouring powder or other products that may damage  
CAUTION  
your telephone.  
Do Not place the telephone in direct sunlight.  
Do Not Use in extreme humidity.  
PLEASE READ BEFORE USE AND  
SAVE THESE INSTRUCTIONS  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS CHECKLIST (For New Zealand Model)  
Curly Cord  
Base Unit  
Handset  
Telephone Line Cord  
Wall Mounting Bracket  
FP102  
Hands Free Speaker Phone  
with Pre-Programmed 5+15 Memory  
Operating Guide  
FeaturePhone Series  
Memory Storage Card  
Operating Guide  
2 x Wall Mounting  
Screws and Wall Plugs  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS CHECKLIST (For Australian Model)  
Curly Cord  
Base Unit  
Handset  
Telephone Line Cord  
and Plug  
Wall Mounting Bracket  
FP102  
Hands Free Speaker Phone  
with Pre-Programmed 5+15 Memory  
Operating Guide  
FeaturePhone Series  
2 x Wall Mounting  
Memory Storage Card  
Operating Guide  
Screws and Wall Plugs  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
• Pre-Programmed Feature Buttons  
Instant access to some of Telecoms / Telstras most popular network service  
features* have been factory programmed into this telephone for your  
convenience.  
* Some of these services will require subscription.  
• 15 One Touch Speed Dial Buttons  
Your most important numbers can be programmed into the memory, for one  
touch speed dialling.  
HandsFree Speakerphone  
Great for the home or office when handsfree speakerphone conversations are  
an important part of your telephone communications.  
Adjustable Speakerphone Volume Control  
During a Speakerphone conversation you can adjust the speaker volume to  
suit your operating environment.  
Adjustable Ringer Volume and Tone Controls  
The ringing volume and tone can be adjusted to suit different home or  
office situations.  
Music on Hold  
When you place a call on hold, the telephone will play a popular melody to  
reassure your caller that the call has not been disconnected.  
Wall Mountable  
This telephone can be simply wall mounted, using the enclosed wall mounting  
bracket and screws.  
Mute  
Press and hold this button to turn off the handset microphone, allowing  
private and confidential conversations with others in the same room.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Last Number Redial  
If the number you are dialing is engaged, simply end the call. Then pickup  
the handset and press the redial button. The telephone will automatically  
redial the last number called.  
Hearing Aid Compatible  
Inductive transducer coil handsets provide hearing aid compatibility.  
Status LED  
Dual coloured LED provides visual indication and differentiation for calls  
'In Use' or 'On Hold' or in ‘SpeakerPhone’ mode.  
Call LED  
Bright red LED provides visual indication of an incoming call.  
• Pause Button  
Allows you to store a timed pause in the memory dialing sequence for  
PABX and Banking Services.  
Advanced Build Quality  
This telephone has been assembled using the latest state of the art Surface  
Mount Device (SMD) technology for your additional assurance of quality  
that goes the distance.  
Call Waiting Button  
Allows you to access Call Waiting services.  
(In New Zealand, Call Waiting is a subscription service)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONS  
NEW ZEALAND MODELS  
1.  
2.  
3.  
4.  
5.  
Button  
Button  
Button  
Button  
Button  
6
7
1
2
3
4
5
6. One Touch Speed Dial Buttons  
7. Memory Storage Card  
AUSTRALIAN MODELS  
1.  
2.  
3.  
4.  
5.  
Button  
Button  
Button  
Button  
6
7
1
2
3
4
5
Button  
6. One Touch Speed Dial Buttons  
7. Memory Storage Card  
NOTE: If required the Memory Storage Card can be turned over to give 20 One Touch  
memory buttons, as shown below  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONS  
17. status LED  
8.  
9.  
Button  
Button  
18.  
Button  
19.  
Button  
10.  
11.  
Button  
Button  
20. Not used  
21. tone Slide Switch  
22. speaker Volume Slide Switch  
23. Telephone Line Jack  
24. ringer Volume Switch (Hi/Med/Low)  
12. Handset Retainer Tab  
13. Button  
14. Telephone Number Card  
15. Numeric Keypad  
16. call LED  
11  
8 9 10  
12  
13  
14  
15  
20  
21  
16  
22  
17  
18  
19  
23  
24  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
HANDSET CORD CONNECTION  
Plug one end of the Handset Cord (curly) into the Handset and the other end  
into the jack on the side of the telephone.  
TELEPHONE LINE CORD CONNECTION  
Plug one end of the line cord (straight) into the telephone line jack on the back  
of the telephone and the other end into the wall outlet.  
NOTE: Most phone equipment available now use modular jacks. Phone cords are fitted  
with a molded plastic connector which plugs into this type of jack. If you do not  
have modular phone jacks, contact your local telephone company for information  
about their installation.  
Never install telephone wiring during a lightning storm.  
Never touch uninsulated telephone wires or terminals unless  
the telephone line has been disconnected.  
CAUTION  
Use caution when installing or modifying telephone lines.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
WALL MOUNTING  
You can mount your phone directly on a wall. Before mounting your phone,  
consider the following:  
Select a location away from electrical cables, pipes or other items behind  
the mounting location that could cause a hazard when inserting screws  
into the wall.  
Make sure the wall material is capable of supporting the weight of the  
Telephone.  
Use the screws (supplied) with anchoring devices suitable for the wall  
material where the Telephone will be placed.  
1. Insert two mounting screws 85mm apart. Allow  
about 5mm between the wall and screw heads for  
mounting the phone.  
2. Gently pull and turn the Handset Retainer  
Tab 180° and release.  
3. Fit the Wall Mounting Bracket to the  
Bottom of the telephone as shown.  
4. Place the Base Unit on the screws and push down until its firmly seated.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP101  
MEMORY DIAL NUMBERS  
20 one touch speed dial numbers can be stored into the memory of your telephone.  
NOTE: There are 5 x Pre-Programmed memories and 15 x One Touch Memories.  
Each memory location can store a maximum of 32 digits.  
STORING ONE-TOUCH SPEED DIAL MEMORIES  
1. To program One-Touch Memories (  
a. Pickup the Handset or press the  
~
).  
button.  
b. Press the  
c. Enter telephone number that you want to program.  
d. Press the button.  
button.  
e. Press the speed dial button (  
~
).  
Example: To programme telephone  
number 273 8383 into one touch memory  
location number 3.  
Pick up the Handset from the Base or press the  
button.  
Press the  
button.  
Enter  
using the keypad,  
then press the  
speed dial  
button, then press the  
button to complete the process.  
MEMORY STORAGE CARD  
When you have programmed a number into the speed dial memory, please write  
the name of the person on the Memory Storage Card (supplied).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
PAUSE  
During the memory storage procedure you may enter a 4 second delay between  
numbers (for accessing a switchboard, or long distance service) by pressing the  
button on the Handset at the point in the number sequence you wish to  
pause. The  
button counts as one digit. Pressing  
more than  
once will increase the length of the pause between numbers.  
DIALING STORED NUMBERS  
For example, to dial memory 3 from the telephone  
1. Pick up the Handset.  
2. Press the  
button.The telephone will dial  
the number stored in this memory location.  
NOTE: If you select a memory location that does not have a stored number, the telephone  
will not dial.  
3. After you have completed the Phone call, place the Handset back on the Base.  
CHAIN DIALING  
On certain occasions, after dialing a number, you may be requested by the party  
or service you are calling to enter a special access code, such as when  
performing a banking transaction. Simply store this number in another memory  
location, refer to “Storing Memory Dial Numbers” on Page 15.  
In this way you can recall both numbers that are stored into their own memory  
locations at the relevant times.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
ADJUSTING THE RINGER VOLUME CONTROL  
While the phone is ringing, you can adjust the ringer volume of your telephone by  
moving the ringer switch to the desired low/medium/high position.  
ADJUSTING THE RINGER TONE CONTROL  
While the phone is ringing, you can adjust the Ringer Tone of your telephone by  
moving the tone slide control to the desired position.  
ADJUSTING THE SPEAKERPHONE VOLUME CONTROL  
During a SpeakerPhone conversation, adjust the speaker volume of your  
telephone by moving the speaker slide control until you hear the desired volume.  
NOTE: When the telephone is switched to Speakerphone Mode, the status LED  
turns green.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
LED indicators  
1. call LED indicator: Red light which flashes when the  
telephone is ringing.  
This is sometimes referred to as a ‘Visual Ringing Indicator’.  
2. status LED indicator:  
a. Solid red light when ‘In Use’.  
b. Solid green light when in Speakerphone mode.  
c. Flashing green light when on ‘Hold’.  
PLACING A TELEPHONE CALL  
1. Remove the Handset from the Base, or press the  
button.  
2. Press the keypad buttons to dial the phone number you want.  
3. After you have completed the phone call, place the Handset back on the Base.  
REDIAL  
If you want to redial the last number dialed, simply pick up the Handset or  
press the  
button, then press the  
button. The telephone  
will automatically redial the last number dialled.  
RECEIVING A TELEPHONE CALL  
When the phone rings, pickup the Handset from the Base, or press the  
button and begin the conversation.  
ACCESSING THE CALL WAITING SERVICE USING THE  
CALL WAITING BUTTON (New Zealand Model only)  
While talking you hear the Call Waiting beep signal.  
Press the  
button. This feature sends a 600mS timed “hook-flash”  
on the telephone line for accessing services such as Call Waiting, etc.  
NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
ACCESSING THE CALL WAITING SERVICE USING THE  
CALL WAITING BUTTON (Australian Model only)  
1. While talking, you hear the call waiting signal (series of beep tones).  
2. Press the  
call on hold.  
3. To switch back to original call, press the  
button then  
to switch call and put the current  
button then  
.
NOTE: The  
and the original call (vice versa). The  
current call connection and pick up the incoming call or the call on hold.  
+
call waiting procedure toggles call between the incoming  
+
procedure will drop the  
MUTE  
Press and hold the  
private and confidential conversations in the same room without the calling party  
button to turn off the Handset microphone, allowing  
hearing. Release the  
party.  
button to resume the conversation with the calling  
PLACING A CALL ON HOLD  
1. To place a call on hold, press the  
button. The status LED will  
flash green and you can hang up. (The Party on Hold will hear music).  
2. To begin the conversation again:  
Pick up the Handset or press the  
button or pick up an extension  
phone, the hold function will then be automatically released.  
MUSIC ON HOLD  
When a call is placed on Hold, the status LED flashes and the telephone  
will play a popular melody to reassure your caller that the call has not been  
disconnected.  
SPEAKERPHONE  
To answer an incoming call, press the  
button and begin your  
hands free SpeakerPhone conversation. Lift the Handset to resume normal  
conversation  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
To make a SpeakerPhone call, press the  
button, listen for the dial tone  
then use the keypad to dial the number you want to call. Lift the Handset to  
resume normal conversation.  
During a regular telephone conversation you can press the  
replace the Handset. The status LED turns green and you can begin your  
SpeakerPhone conversation.  
button and  
NOTE: The status LED turns green during SpeakerPhone use, and red during  
normal use.  
NOTE: It is not recommended to operate the  
function under  
noisy conditions.  
NOTE: During a conversation you can adjust the speaker Volume Control on the side of  
the telephone to increase or reduce the other parties voice.  
USING THE PRE-PROGRAMMED FEATURE BUTTONS  
(New Zealand Model only)  
Instant access to some of Telecoms most popular network service features have  
been factory programmed into this telephone for your convenience.  
Call Minder  
Telecoms Call Minder Message Centre is available for leaving and retrieving  
messages.  
Pick up the handset or press the  
press the button.  
button. Wait for the dial tone then  
The telephone will automatically dial the access code ‘083210’ to connect you  
with Telecoms ‘Call Minder’ service. Telecoms ‘Call Minder’ Service will talk you  
through the rest.  
Divert On  
Telecoms ‘Immediate Call Diversion’ Service is available for diverting calls to  
another number.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
Pick up the handset or press the  
button. Listen for the dial tone then  
press the  
button.  
The telephone will automatically dial the access code ‘161’ and will enable  
‘immediate call diversion’ to the number you have assigned the divert to. Wait for  
the ‘confirmation tone’ (long-short-long) and then hang up.  
To program, or re-program the ‘immediate call diversion’ number assigned to  
‘161’ follow the example below, replacing the number 345 6789 with the  
telephone number you wish to divert calls to.  
Example  
Pick up the handset or press the  
then press  
button. Wait for the dial tone and  
.
NOTE: To confirm the diverted number, stay on the line. The number will automatically be  
dialled for you to check. You can then hang up. The normal Local, National, Mobile  
or International Call charges will apply.  
NOTE: Until you cancel the Call Diversion, all incoming calls will be immediately diverted  
to the number you have previously assigned to ‘161’  
Divert Off  
To cancel ‘immediate call diversion’ to another number.  
Pick up the handset or press the  
button and listen for the  
‘confirmation tone’ (long-short-long), then press the  
hang up.  
button and  
The telephone will automatically dial the access code ‘160’ which will cancel  
‘immediate call diversion’.  
Call Waiting Off  
Telecoms ‘Call Waiting’ Service lets you know if you have a call waiting by  
sounding 4 beeps.  
However, you may wish to cancel ‘Call Waiting’ for your next call, so you can relax  
and talk undisturbed.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
Pick up the handset or press the  
button, then press the  
button and dial the number you wish to call.  
Call Back  
When the party you are calling is engaged or doesn’t answer, hang up.  
Pick up the handset or press the button and then the  
button. The telephone will automatically dial the access code ‘*51’ to enable the  
‘auto callback’ feature.  
Listen for an interrupted dial tone and hang up.  
Telecoms ‘auto callback’ Service will automatically ring you with a distinctive  
ringing tone. Your ‘call back’ will go through as soon as you pick up your  
handset, and you will hear the standard ringing tone.  
You can apply up to 3 ‘auto callbacks’ at one time by repeating this procedure.  
Auto callback’ will monitor the number for 30 minutes - if the callback is not  
successful within this time, it will be cancelled automatically.  
Auto callback’ will only call you once. If your line is busy or you do not answer,  
‘auto callback’ will be cancelled automatically.  
If ‘auto callback’ cannot work for that number, you will hear an unobtainable  
tone (pip-pip-pip-pip-pip)  
NOTE: Call Minder, Call Diversion, Call Waiting and Auto Callback are all network services  
provided by Telecom New Zealand Limited.  
They are all subscription services, and may not be available to all customers in all  
areas. To subscribe to any of these services, or check on the availability for you in  
your area, please contact Telecom Residential Sales and Service on ‘123’ or  
Telecom Business on ‘126’.  
NOTE: If you do not want to use the above services, simply turn over the memory card and  
program any or all of the 20 speed dial buttons to your own requirements.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
USING THE PRE-PROGRAMMED FEATURE BUTTONS  
(Australian Model Only)  
Instant access to some of Telstras most popular network service features have  
been factory programmed into this telephone for your convenience.  
Block CID  
Each time you make a call, your telephone number is automatically forwarded to  
the party you are calling (unless your number is a silent number). In certain  
cases you may wish to prevent your number being sent.  
Pick up the handset or press the  
button. Wait for the dial tone, press  
the button and then dial the telephone number of the person you  
wish to call. Your telephone number will be withheld for this call only.  
Divert On  
Telstras ‘Call Forward No Answer’ Service is available for diverting calls to  
another number if your phone is not answered within 20 seconds (approximately  
7 or 8 rings).  
Pick up the handset or press the  
button. Wait for the dial tone, press  
the button and then hang up. The telephone will automatically dial  
the access code ‘*61#’ and will enable ‘Call Forward No Answer’ to the fixed num-  
ber you have previously assigned the divert to.  
NOTE: To program, or re-program the fixed ‘Call Forward No Answer’ number, follow the  
example below, replacing the number 9876 5432 with the number you wish to  
divert calls to.  
Pick up the handset or press the  
press  
button. Wait for the dial tone then  
. You will hear a long beep and a  
voice announcement confirming that this feature has been activated, then you can  
hang up.  
To confirm the diverted number, turn ‘Call Waiting’ off, then dial your own  
number. The number you are forwarding your calls to will begin to ring.  
The normal Local, Mobile or National Call charges will apply.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
NOTE: Until you cancel the ‘Call Forward No Answer’ diversion, (use  
)
all incoming calls will be diverted after 20 seconds (approximately 7 or 8 rings).  
Divert Off  
To cancel ‘Call Forward No Answer’ to another number.  
Pick up the handset or press the  
button. Press the  
button and then hang up. The telephone will automatically dial the access code  
‘#61#’ and will cancel the diversion.  
Call Return  
Telstras ‘Call Return’ Service lets you return the last unanswered call.  
Pick up the handset or press the  
button, wait for the dial tone and  
then press the  
access code  
button. The telephone will automatically dial the  
. You will hear a recorded voice announcement advis-  
ing the calling parties number. Press  
this number.  
if you would like to be connected to  
NOTE: Using the ‘Call Return’ Service will incur an immediate Telstra charge equivalent of  
a local calling charge. Pressing to be connected to the announced number will  
incur an additional charge equivalent to the type of call being made, Eg. Local,  
Community, National or Mobile. Please check with Telstra to confirm the current  
charges before using this service.  
Message Bank  
Message Bank’ is Telstras invisible answering machine”.  
When your line is busy, or you are not able to answer your phone, ‘Message  
Bank’ will play callers your own personal greeting and they will be prompted to  
leave a message.  
You can tell if you have a message in your ‘Message Bank’ by picking up the  
handset and listening for the special ‘stutter’ dial tone.  
If you hear this special ‘stutter’ dial tone, simply press the  
button. This button has been pre-programmed to dial the Sydney FREECALL  
number 1800 351 244. When prompted, enter your PIN number and then press  
the  
key. Once you reach the main menu press to listen to your messages.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING YOUR FP102  
NOTE: There is a monthly fee using the Message Bank service.  
For subscription and further information about Message Bank please call  
1800 052 052 (this is a free call unless from a mobile phone).  
If you live outside the Sydney area, you will need to re-program the  
button as follows;  
Brisbane : Pick up the handset, then press  
Melbourne : Pick up the handset, then press  
Adelaide : Pick up the handset, then press  
Perth  
: Pick up the handset, then press  
Telstra is a registered trademark of Telstra Corporation Limited CAN  
051 775 556  
NOTE: Some of the Telstra network services described above are subscription or user pays  
services. These services may not be available to all customers in all areas.  
To subscribe to any of these services, or check on the availability for you in your  
area, please contact Telstra Residential Sales and Service on ‘13 2200’ or Telstra  
Business on ‘13 2000’.  
NOTE: If you do not want to use the above services, simply turn over the memory card and  
program any or all of the 20 speed dial buttons to your own requirements.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This page intentionally left blank.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
If your Telephone is not performing to your expectations, please try these simple  
steps. If you are still unable to resolve the problems, contact Uniden Customer  
Service for assistance.  
New Zealand: 0800 4 UNIDEN  
4 864336  
Australia:  
1800 632 789  
Problem  
Suggestion  
Can’t make or receive calls.  
Make sure you use only the line cord supplied  
with this telephone.  
Check that both ends of the telephone  
line cord and Handset cord are plugged in.  
Make sure you do not have too many  
telephones connected to the telephone line.  
Adjust the Ringer Volume to either  
med/high.  
Can’t hear the telephone ringing.  
Plug another telephone into the telephone  
socket and check for a dial tone.  
Speakerphone Volume too low.  
During speakerphone conversation, adjust the  
speaker volume slider control on the side of  
the telephone.  
One Touch Speed Dial Numbers are not  
working correctly.  
Repeat the memory storage procedures detailed  
on page 19.  
Handset does not hang up in the wall mount  
position.  
Make sure the Handset Retainer Tab has been  
turned around (point facing up) and the  
Handset is placed firmly into the cradle.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Specifications for New Zealand Model  
Compliance  
Size:  
Weight:  
PTC200  
150mm(W) x 225mm(D) x 70mm(H)  
Approx. 536g  
Specifications, Features and availability of Optional Accessories shown are typical  
and subject to change without notice.  
NOTE: FOR USE OF THIS DEVICE IN NEW ZEALAND  
1. The grant of a Telepermit for any item of terminal equipment indicates only that  
Telecom has accepted that the item complies with minimum conditions for  
connection to its network. It indicates no endorsement of the product by  
Telecom, nor does it provide any sort of warranty. Above all, it provides no  
assurance that any item will work correctly in all respects with another item of  
Telepermitted equipment of a different make or model, nor does it imply that  
any product is compatible with all of Telecom's network services.  
2. Immediately disconnect this equipment should it become physically damaged,  
and arrange for its disposal or repair.  
3. This equipment shall not be used in any manner which could constitute a  
nuisance to other Telecom customers.  
Specifications for Australian Model  
Compliance  
Size:  
Weight:  
TS001, TS002, TS004, AS/NZS3548, TS008  
150mm(W) x 225mm(D) x 70mm(H)  
Approx. 536g  
Specifications, Features and availability of Optional Accessories shown are typical  
and subject to change without notice.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY  
One-Year Limited Warranty  
Important: Evidence of original purchase is required for warranty service.  
WARRANTOR: Uniden Australia Pty Limited ACN 001 865 498  
Uniden New Zealand Limited  
ELEMENTS OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty its FP102  
(hereinafter referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations  
or exclusions set out below.  
WARRANTY DURATION:This warranty to the original retail owner only, shall terminate and be of no further effect 12  
months after the date of original retail sale. This warranty will be deemed invalid if the product is: (A) Damaged or not  
maintained as reasonable and necessary, (B) Modified, altered or used as part of any conversion kits, subassemblies, or  
any configurations not sold by Uniden, (C) Improperly installed, (D) Repaired by someone other than an authorised  
Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or  
parts or as a part of a system not manufactured by Uniden.  
PARTS COVERED:This warranty covers for one (1) year, the Telephone and Handset only. All accessories  
(Cable, Modular Plug, etc) are covered for 90 days only.  
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty  
is in effect, the warrantor, at its discretion, will repair the defect or replace the product and return it to you without  
charge for parts and service. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT  
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES NOT IN ANY WAY  
AFFECT YOUR RIGHTS UNDER THE CONSUMER GUARANTEE ACT.  
WARRANTY CARD: If a Warranty Card has been included with this Product, please complete and return to us within 14  
days of purchase. Your name and the serial number of the Product will then be registered in our database and this will  
help us process your claim with greater speed and efficiency should you require warranty service.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: In the event that the product does not conform to  
this warranty, the Product should be shipped or delivered, freight pre-paid, with evidence of original purchase (e.g. a  
copy of the sales docket) to the warrantor at:  
UNIDEN AUSTRALIA PTY LIMITED  
SERVICE DIVISION  
345 Princes Highway, Rockdale, NSW 2261  
Ph: (02) 9599 3577  
Fax: (02) 9599 3278  
FREE CALL 1800 632 789  
Customers in other States should ship or deliver the Product freight pre-paid to their nearest Uniden Authorised Repair  
Centre. (Contact Uniden for the nearest Warranty Agent to you)  
UNIDEN NEW ZEALAND LIMITED  
SERVICE DEPARTMENT  
150 Harris Road, East Tamaki, Auckland  
Ph: 0-9-273 8383  
Fax: 0-9-274 0009  
Toll Free: 0800 4 UNIDEN  
4 864336  
Customers in other States should ship or deliver the Product freight pre-paid to their nearest Uniden Authorised Repair  
Centre.(Contact Uniden for the nearest Warranty Agent to you)  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNIDEN ©1998 Uniden Australia Pty Limited ©1998 Uniden New Zealand Limited  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tektronix Stereo System CSA8000B User Manual
Teledyne Respiratory Product 3000TA User Manual
Toshiba Computer Drive AT1S0 User Manual
Tyan Computer Network Card TYAN S1668 User Manual
Uniden GPS Receiver GNS8431 User Manual
VDO Dayton Automobile Accessories RV 5100 User Manual
ViewCast Network Card Osprey 240e User Manual
Viking Range F1605G User Manual
Vizio Answering Machine V NE HVM E 3 03 User Manual
Vizio Carpet Cleaner V 128 User Manual