DECT 2005
Accessory handset for
DECT 2015 Series
DECT 2035 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatible Bases
This handset is compatible with Uniden’s 1.8 GHz DECT
Expandable phone system: the DECT2015 and DECT2035
series.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any
items are missing or damaged, please contact your place of
purchase immediately.
• Cordless Handset
• Printed Material
• Charging cradle with AC Adapter (model # AAD-600S(M):
Input 240V AC, 50Hz; Output 9V DC, 210 mA)
• Rechargeable Ni-Cd Battery Pack (model # BT-904)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Battery
Use only the Uniden BT-904 rechargeable battery pack supplied
with your cordless telephone.
Line up the red and black
wires on the battery pack
connector with the sticker in
the handset’s battery
compartment.
Unpack the
handset, battery
pack and battery
cover.(If the battery
cover is on the
handset, press in
on the notch and
slide the cover off.)
RED
BLACK
Push the battery pack
connector in firmly. (You
should hear it click into
place.) Gently tug on the
battery wires to make sure
the connection is secure.
Place the cover over the
battery compartment and
slide it up into place.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack that
automatically recharges when the handset is placed in the
charging cradle.
Use only the Uniden AAD-600S(M) AC adapter with the charging
cradle.
Connect the AC
adapter to the DC IN
9V jack as shown.
(It may already be
connected.)
Connect the AC adapter to a
standard 240V AC wall outlet.
Place the handset in the
charging cradle with the
display facing forward.
Make sure that the charge
LED illuminates when the
handset is seated.
What if the charge LED
doesn’t light up?
Reseat the handset; make sure
the contacts on the bottom of
the handset are lined up with
the contacts in the cradle.
Check the AC adapter connection.
Make sure you are not using an outlet
that’s controlled by a wall switch.
Charge your handset at least 15 to 20 hours
before using your new handset for the first time.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering the Handset
You must register the handset to the base before you can use it.
Only one handset can be registered at a time. (If an accessory
handset has ever been registered to a base, you must reset the
handset before you can register it to a new base.)
To register to a DECT2015 or DECT2035 base:
Place the accessory handset in the base. While the handset
is registering, Handset Registering appears in the LCD. When
Registration complete is displayed, the handset has been
registered to the base.
What if the
1
display shows
Registration
failed?
Charge the handset
for 15-20 hours.
Extra Handset
Pick up the
handset from
the base and
try again.
Charging cradle
2
Extra Handset
Place the extra handset
in the main base to
register.
Main Base
4
Extra Handset
+
Main Base
3
Charging cradle
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Handset
If you want to register the handset to a different base or replace
a handset with another one, you must first clear the registration
information from the base and the handset.
1) Press and hold END and # for at least five seconds, until the
SYSTEM RESET menu appears.
2) Select the Deregister HS
submenu by pressing MENU/
SELECT. Which Handset?
appears in the display.
3) Use
or
to select the
handset ID to be de-registered from the list, and then press
MENU/SELECT. Deregister HS appears.
4) Press
to move the cursor to Yes, and then press
MENU/SELECT. You will hear a confirmation tone.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Handset Without the Base
If the original base this handset was registered to is not
available for some reason (for example, it is lost or somehow
incapacitated), you can still reset the handset and use it with
another base.
1) Press and hold END and # for at least five seconds, until the
SYSTEM RESET menu appears.
2) Press
to move the cursor to Base Unavailable and then
to move the cursor to the base which you want
press MENU/SELECT.
3) Press
to de-register from, and then press MENU/SELECT. Base
Unavailable appears.
4) Press
to move the cursor to Yes, and then press
MENU/SELECT. You hear a confirmation tone, and the
handset deletes its own link to the base without trying to
contact the base.
Now you are ready to register the handset to the new base.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Interface
Parts of the Handset
new message LED
Earpiece
Display (LCD)
key (up)
CLEAR/INT'COM key
(clear/intercom)
MENU/SELECT key
key
key (phonebook/left)
(caller ID/right)
END key
TALK/FLASH key
key (down)
key (speaker)
Twelve-key dial pad
/TONE key
# key
PREMIUM
REDIAL/PAUSE key
/MUTE key
(messages/mute)
DECT
Microphone
Charging contacts
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Reading the Display
In standby
Time
Handset ID and banner
Number of new
Caller ID calls received
During a call
Call duration
The ringer off icon indicates that the ringer is
turned off.
The voice mail icon appears when you have
messages waiting in your voice mailbox.
The privacy icon appears when the Privacy
Mode is turned on.
The speaker icon appears when the speaker
phone is in use.
The mute icon appears while the microphone
is muted.
The battery icon indicates the handset
battery status: full, medium, low, and empty.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Four-way Function Key
Your handset has a four-way function key that allows you to
move the cursor or pointer on the display and access the most
commonly used features at the touch of a button.
• Press the left side of the key to open the phonebook.
• Press the right side of the key to open the Caller ID list.
• Press the top of the key to increase the ringer volume (while
the phone is
in standby) or
speaker volume
(while you are on
a call).
Increase the volume
• Press the bottom
of the key to
Open the
phonebook
Open the
Caller ID list
decrease the
ringer volume
(while the phone
is in standby) or
speaker volume
(while you are on
a call).
Four-way
Function Key
Decrease the volume
Using the Handset Menus
• To open the menu, press the MENU/SELECT key.
• The arrow cursor on the left side of the line shows which
menu item is currently highlighted. Use
function key to move the cursor up and
down.
on the four-way
to move the cursor
• To select the highlighted option, press MENU/SELECT.
• To go back to the previous screen, press left on the four-way
function key.
• To exit the menu, press END.
• If you don’t press any keys for thirty seconds, the phone will
time out and exit the menu.
Entering Text from Your Handset
You can use the number keypad on your handset to enter text
by referring to the letters printed on each number key. When you
press the number key in a text entry field, the phone displays
the first letter printed on the number key. Press the number key
twice to display the second letter and three times to display the
third.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
• When [Aa] appears on the display, capital letters are displayed
first, then lower case letters, and then the number on the key.
• When [aA] appears on the display, lower case letters are
displayed first, then the number on the key, and then capital
letters.
• When you input the first letter or a letter after a blank space,
the default mode is [Aa]. From the next letter, the mode
changes to [aA] automatically.
• You can switch back and forth the mode manually between
[Aa] and [aA]. Press /TONE; the case (small/capital) of the
letter entered changes also.
If two letters in a row use the same number key, enter the first
letter, then use right on the four-way function key to move the
cursor to the next position to enter the second letter.
For example, to enter the word "Movies":
Number of times key is pressed (when [Aa] appears on the display)
1) Press 6
once to
1
enter M.
2 ABC
2) Use right
3 DEF
on the
4 GHI
four-way
5 JKL
function
6 MNO
key to
7 PQRS
8 TUV
move the
cursor to
the right.
9 WXYZ
0 OPER
3) Press 6
three times
to enter o.
4) Press 8 three times to enter v.
5) Press 4 three times to enter i.
6) Press 3 two times to enter e.
7) Press 7 four times to enter s.
8) Press MENU/SELECT to end your text entry.
If you make a mistake while entering a name, use right or left
on the four-way function key to move the cursor to the incorrect
character. Press CLEAR/INT’COM to erase the wrong character,
and then enter the correct character. To delete all characters,
press and hold CLEAR/INT’COM.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Accessory Handset
Making and Receiving Calls
With the earpiece
With the speaker phone
1) Pick up the handset from the 1) Pick up the handset
cradle.
2) Dial the number.
3) Press TALK/FLASH.
from the cradle.
2) Dial the number.
Make a
call
3) Press
.
1) Pick up the handset.
(If AutoTalk is on, the phone
answers when you pick up the
handset from the cradle.)
1) Pick up the handset.
2) Press
Answer a
call
2) Press TALK/FLASH.
(If Any Key Answer is on, you
can press any key on the dial
pad.)
.
Hang up Press END or return the handset to the cradle.
Adjusting the Volume
Choose from four ringer volume settings (off, low, medium,
and high). With the phone in standby, press or . The
display shows the current volume level and the handset
sounds the ringer at that level. Use to make the ringer
volume louder or to make it softer or turn it completely off.
Ringer
Volume
Choose from six volume levels for the earpiece. While on a
Earpiece
Volume
call, press
to make the earpiece volume louder or
to
make it softer.
Choose from six volume levels for the handset speakerphone.
Speaker
Volume
While on a speakerphone call, press
volume louder or to make it softer.
to make the speaker
Notes: • If you set the ringer volume to Off, the handset won’t ring. The
other stations will ring according to their individual settings.
• The handset earpiece and the handset speaker have separate
volume settings.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Caller ID and Call Waiting
If you subscribe to Caller ID, you can store up to thirty Caller
ID numbers in each handset. Caller ID records are stored from
newest to oldest. Once your Caller ID list is full and you receive
an incoming call, the oldest record will be automatically deleted
to make room for the new record.
To open the Caller ID list, press . The phone will show the
latest records. From the screen, you have the following options:
Press
to scroll through CID records. CID
Scroll through the
records
records are stored chronologically from newest
to oldest. (New records have an asterisk next
to the received time.)
1) Find the record you want to store and press
MENU/SELECT.
Store a record in the
phonebook
2) Move the cursor to Store into PB, and press
MENU/SELECT.
Find the entry you want to dial and press
Dial a record
TALK/FLASH or
.
1) Find the entry you want to delete and press
MENU/SELECT.
Delete a record
2) Move the cursor to Delete Entry, and press
MENU/SELECT.
1) Press MENU/SELECT.
Delete all records
2) Move the cursor to Delete All, and press
MENU/SELECT.
Press END, or press
(the left key on the
Exit the Caller ID list
four-way function key) if you are on a call.
Using Call Waiting
If you subscribe to call waiting, a tone sounds if a call comes in when you
are on the phone. If you subscribe to Caller ID on call waiting, the Caller
ID information of the waiting call appears on the display.
For Australian model: Press TALK/FLASH and then [2] on the handset
to accept the waiting call. After a short pause, you will hear the new
caller.
To return to the original caller, press TALK/FLASH and then [2] on the
handset again.
For New Zealand Model:
Press TALK/FLASH on the handset to accept the waiting call. After a
short pause, you will hear the new caller. To return to the original caller,
press TALK/FLASH on the handset again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Phonebook
Your handset can store up to seventy names and numbers in
your phonebook. When all the phonebook entries are full, you
will hear a beep and Memory Full appears. You cannot store any
additional names and numbers unless you delete some of the
existing ones.
Press
to enter the phonebook. Once in the phonebook, you
have the following options:
Press
alphabetically.
to scroll through the phonebook
Scroll through
the entries
Jump to
entries that
start with a
certain letter
Press the number key corresponding to the letter you
want to jump to.
1) Press MENU/SELECT.
Store a new
entry
2) Move the cursor to Create New, and then press
MENU/SELECT.
1) Find the entry you want to copy, and press
MENU/SELECT.
Copy one
entry to
another
station
2) Move the cursor to Copy, and press
MENU/SELECT
.
3) Move the cursor to select the station you want to
copy the entry to, and press MENU/SELECT.
Copy all
entries to
another
station at
once
1) Press MENU/SELECT, and then select Copy All.
2) Move the cursor to select the station you want to
copy the entries to, and press MENU/SELECT.
3) Move the cursor to Yes, and press MENU/SELECT.
1) Find the entry you want to dial.
Dial an entry
2) Press TALK/FLASH or
.
1) Find the entry you want to delete, and press
Delete an
entry
MENU/SELECT.
2) Move the cursor to Delete, and press MENU/SELECT
.
1) Press MENU/SELECT.
Delete all
entries
2) Move the cursor to Delete All, and press
MENU/SELECT.
Close the
phonebook
Press END, or press
again if you are on a call.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Redialing a Number
To redial one of the last five numbers dialed on this handset,
press REDIAL/PAUSE. This opens the redial list. Use
to find the number you want to dial, and press TALK/FLASH or
in standby, or press MENU/SELECT during a call.
and
Muting the Ringer (One Call Only)
While the handset is ringing, press
/MUTE or END to mute
the ringer for this call. The phone will ring again on the next call.
(The handset must be off the cradle to mute the ringer.)
Muting the Microphone
To mute the microphone so the caller can't hear you, press
/MUTE during a call. Mute On and appear in the display.
Press
/MUTE again to cancel muting.
Privacy Mode
To prevent other stations from interrupting a call, press
MENU/SELECT during a call. Move the cursor to Call Privacy,
and then press MENU/SELECT. Privacy Mode On and appear
in the display. Repeat the procedure to turn off privacy mode.
Adjusting the Audio Tone
If you aren't satisfied with your phone's audio quality, you can
adjust the Audio Tone of the earpiece. While on a call, press
MENU/SELECT. Move the cursor to select Audio Tone, and
then press MENU/SELECT. Move the cursor to select desired
audio tone options: High Tone, Natural Tone, or Low Tone. (The
default setting, Natural Tone, is recommended for hearing aid
users.) Press MENU/SELECT to confirm. After two seconds, the
displayed audio tone is set, and the display returns to normal.
Audio tone adjustments only apply to the earpiece, not the
speakerphone.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Hold, Conference, Transfer and Intercom
Press CLEAR/INT’COM. If you leave a caller on
hold for more than five minutes, the call will be
Put a call on hold
disconnected. To return to the party on hold, press
TALK/FLASH or
.
To join a call already in progress, press
Join a call already
in progress
TALK/FLASH or
. You can hang up normally;
the other station remains connected to the call.
Press CLEAR/INT’COM; the call is placed on
hold. Use
or
to select the station you want
to transfer the call to, and press MENU/SELECT.
(To page all stations at once, select All.) When the
other station answers, you can talk to the station;
the outside call remains on hold. If the other
Transfer a call
station accepts the call, you will be disconnected.
To cancel the transfer and return to the call,
Cancel a transfer
press TALK/FLASH or
.
To answer the transfer page and speak to the
transferring station, press TALK/FLASH or
CLEAR/INT’COM. To accept the call and speak to
the caller, press TALK/FLASH again.
Accept a
transferred call
With the phone in standby, press
CLEAR/INT’COM.Use
or
to select the
Make an intercom
page
station you want to talk with, and then press
MENU/SELECT. (If you select All, all other
stations will be paged.)
Cancel a page
To cancel the intercom page, press END.
Answer an
intercom page
Press TALK/FLASH or CLEAR/INT’COM.
Note: When answering a transferred call or an intercom page, if
AutoTalk is on, the handset will automatically answer the page
when you pick up the handset from the cradle. If Any Key
Answer is on, you can also press any key on the handset’s dial
pad.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing Your Answering System
If your base has an answering system, you can use your handset
to get your messages and change your answering system setup.
The answering system plays your new messages (that you
have not listened to yet) first. If you have no new messages, the
system plays your old messages.
You have the following options:
Press
/MUTE. The system announces the number of
new and old messages, then plays the first new message
followed by the day and time it was received. Then the
system plays the new messages in the order they were
received.
Playing new
messages
Press 1 once to go to the beginning of the current
Repeating
a message
message.
Press 1 repeatedly to go back to a previous message.
Skipping a
message
Press 3 to go to the beginning of the next message.
Deleting a While a message is playing, press 4.
message
The message is permanently deleted.
After you listen to your new messages, press
again to play your old messages.
/MUTE
Playing old
messages
Press 5 to stop the message playback.
Press END to exit the system and return to standby,
or press 2 to restart the message playback.
Exiting the
message
review
Screening Calls
If your base has an answering system, you can listen to callers
as they leave a message. Press
/MUTE when the system is
answering to listen to the caller without answering the phone.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing Voicemail
If your base doesn't have an answering system and you
subscribe to a voice mail service, you can program your handset
to automatically dial the access number.
1) Press MENU/SELECT.
2) Move the cursor to Handset Setup and press
MENU/SELECT.
3) Move the cursor to Edit Voice Mail and press
MENU/SELECT.
4) Enter your access number (up to twenty digits). If you need
the phone to wait before sending the next digits, press
REDIAL/PAUSE to insert a two-second pause. For a longer
pause, press REDIAL/PAUSE multiple times. Each pause
counts as one digit.
5) Press MENU/SELECT when you are finished.
Once you program your access number, press
your voice mail service.
/MUTE to dial
Maintenance
Battery Life
With average use, your battery provides more than ten hours
of talk time and approximately seven days of standby time.
For optimum performance, be sure to return the handset to the
cradle after each call. If the handset is left off of the cradle, the
actual talk time duration will be reduced respective to the amount
of time the handset is off the cradle.
Note: Do not place the power cord where it creates a trip hazard or
where it could become chafed and create a fire or electrical
hazard.
Low Battery Alert
When the battery pack is very low, the display shows Low
Battery - Charge Handset and the empty battery icon. If the
phone is in standby, none of the keys will operate. If you are on
a call, complete your conversation as quickly as possible, and
return the handset to the cradle.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Replacement and Handling
With normal usage, your battery should last about one year.
If the talk time becomes short even after the battery is recharged,
please replace the battery. You can purchase a replacement
battery by contacting Uniden. See inside the back cover page for
contact information.
Warning:
To avoid the risk of personal injury or property damage from fire or
electrical shock, use only the BT-904 battery pack.
Caution:
- This equipment contains a rechargeable Nickel-Cadmium battery.
- Do not remove the batteries to charge them.
- Never throw the battery in a fire or disassemble or heat it.
- Do not remove or damage the battery casing.
- Do not short-circuit the battery.
- Do not charge the battery used in this equipment in any charger
other than the one designed to charge this battery as specified in
the owner's manual. Using another charger may damage the
battery or cause the battery to explode.
- Rechargeable batteries must be recycled or disposed of properly.
Clean the Battery Contacts
To maintain a good charge, clean
the charging contacts on the
handset once a month. Dampen
a cloth with plain water. Gently
rub the damp cloth over the
charging contacts until all visible
Contacts
dirt is removed.
Dry the contacts thoroughly
before returning the handset to the cradle.
Caution:
Do not use any chemical products (alcohol, paint thinner, etc.), or
you may discolor the surface and damage the finish.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
21
Download from Www.Somanuals.com. All Manuals Search And Download.
One Year Limited Warranty
UNIDEN DECT 2005
IMPORTANT Evidence of the original purchase is required for warranty service.
Warrantor: Uniden Australia Pty Limited ABN 58 001 865 498
Uniden New Zealand Limited
Elements of Warranty: Uniden warrants to the original retail owner for the duration
of this warranty its DECT 2005 (hereinafter referred to as the Product), to be free
from defects in materials and craftsmanship with only the limitations or exclusions
set out below.
Warranty Duration: This warranty to the original retail owner only is only valid in
the original country of purchase and shall be of no further effect 1 year after the
date of original retail sale. This warranty will be deemed invalid if the Product is: (A)
Damaged or not maintained as reasonable and necessary, (B) Modified, altered
or used as part of any conversion kits, subassemblies, or any configurations not
sold by Uniden, (C) Improperly installed, (D) Repaired by someone other than
an authorized Uniden Repair Agent for a defect or malfunction covered by this
warranty, (E) Used in conjunction with any equipment or parts or as a part of a
system not manufactured by Uniden. (F) Only available in the original country of
sale.
Parts Covered: This warranty covers for one (1) year, the Product and included
accessories.
Statement of Remedy: In the event that the Product does not conform to this
warranty at any time while this warranty is in effect, the warrantor, at its discretion,
will repair the defect or replace the Product and return it to you without charge for
parts and service. This warranty does not provide for reimbursement or payment
of incidental or consequential damages. This EXPRESS WARRANTY is in addition
to and does not in any way affect your rights under the TRADE PRACTICES ACT
1974 (Cth) (Australia) or the CONSUMER GUARANTEES ACT (New Zealand).
Procedure for obtaining performance or warranty: in the event that the Product
does not conform to this warranty, the Product should be shipped or delivered,
freight prepaid, with evidence of original purchase (e.g. a copy of the sales docket)
to the warrantor at:
UNIDEN AUSTRALIA PTY LTD
Service Division
UNIDEN NEW ZEALAND LTD
Service Division
345 Princes Highway,
Rockdale, NSW 2216
Fax (02) 9599 3278
150 Harris Road, East Tamaki,
Auckland
Fax (09) 274 4253
22
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2008 Uniden Australia Pty Limited/Uniden New Zealand Limited
Printed in China UUZZ01663BZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
|