Uniden Scanner BR330T User Manual

BR330T  
OWNER’S  
MANUAL  
OWNER’S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING!  
Uniden does not represent this unit to be  
waterproof. To reduce the risk of fire or electrical  
shock, do not expose this unit to rain or moisture.  
®
®
®
®
Motorola , PL , PRIVACY PLUS , Private Line ,  
®
®
SMARTNET ,and SMARTZONE are registered  
trademarks of Motorola, Inc.  
®
LTR is a registered trademark of E.F. Johnson Co.  
®
EDACS is a registered trademark of M/A-COM  
Private Radio Systems Inc.  
®
®
Uniden and Bearcat are registered trademarks of  
Uniden America Corporation.  
TrunkTracker , Trunk Tracking , and Close Call  
are proprietary trademarks of Uniden America  
Corporation.  
Other trademarks used throughout this manual are the  
property of their respective holders.  
Important: If you use the supplied AC adapter to power  
the scanner but have not installed batteries in the  
scanner, never turn the scanner off by disconnecting  
the AC adapter or unplugging it from the AC outlet.  
This might corrupt the scanner’s memory.  
Always use  
to turn the scanner off before  
disconnecting AC power.  
Precautions  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
The FCC Wants You to Know ..................................................................... 8  
Contents  
Scanning Legally ........................................................................................ 8  
Introduction ............................................................................................... 10  
Feature Highlights ..................................................................................... 11  
About This Manual .................................................................................... 16  
Using the Multifunction Scroll Control .................................................... 16  
Entering Text ......................................................................................... 16  
How the Scanner’s Controls Are Represented in This Manual .............. 17  
Understanding Scanning .......................................................................... 19  
Understanding the Scanner’s Memory ..................................................... 19  
What is Scanning? .................................................................................... 19  
What is Searching? ................................................................................... 20  
What is CTCSS/DCS? .............................................................................. 20  
Conventional Scanning ............................................................................. 22  
Simplex Operation ................................................................................. 23  
Repeater Operation ............................................................................... 23  
What is Trunk Tracking? ........................................................................... 24  
Trunked Scanning ..................................................................................... 24  
Types of Trunking Systems ...................................................................... 26  
Motorola Trunking .................................................................................. 26  
EDACS Trunking ................................................................................... 27  
LTR Trunking ......................................................................................... 28  
I-Call (Motorola/EDACS) ........................................................................... 29  
Where To Get More Information ............................................................... 29  
Information On The Internet ................................................................... 29  
Included With Your Scanner ..................................................................... 31  
Setting Up Your Scanner .......................................................................... 32  
Using Internal Batteries ............................................................................ 32  
Using Rechargeable Batteries .................................................................. 33  
Removing the Display Sticker ................................................................... 34  
Using AC Power ....................................................................................... 34  
Connecting the Antenna ........................................................................... 35  
Connecting an Optional Antenna ........................................................... 35  
Connecting an Earphone/Headphone ...................................................... 35  
Connecting an Extension Speaker ........................................................... 35  
Attaching the Belt Clip .............................................................................. 36  
Attaching the Wrist Strap .......................................................................... 36  
A Look At The Keypad .............................................................................. 36  
A Look At The Display .............................................................................. 39  
Using Menu ............................................................................................... 41  
Using Func ................................................................................................ 41  
Basic Operation ......................................................................................... 42  
Turning On the Scanner and Setting the Squelch .................................... 42  
Scanning Systems .................................................................................... 43  
Preprogrammed System Tips ................................................................ 43  
Selecting Systems to Scan ....................................................................... 44  
Selecting System Channel Groups ........................................................... 45  
Locking/Unlocking Systems ...................................................................... 45  
Locking/Unlocking Channels .................................................................... 45  
ID Scan/ID Search Mode .......................................................................... 46  
Temporarily Holding On a System ............................................................ 46  
Holding On a Channel .............................................................................. 46  
Quickly Storing an ID During ID Search ................................................... 47  
Quick-Storing Channels or Talk Group ID’s .............................................. 47  
Quickly Recalling Channels ...................................................................... 48  
Monitoring Trunking Activity ...................................................................... 48  
Toggling Channel Alpha Tags ................................................................. 48  
Using the Menu .......................................................................................... 49  
Programming Systems Menu ................................................................... 51  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Settings ............................................................................................ 53  
Displaying System Information ................................................................. 53  
Viewing Memory Used ............................................................................53  
Viewing the Firmware Version ................................................................53  
Adjusting the Key Beep ............................................................................ 53  
Locking/Unlocking the Keypad and Scroll ................................................ 53  
Turning Power Save On or Off ................................................................. 54  
Priority Scan ............................................................................................. 54  
Using the Backlight ................................................................................... 54  
Setting the Audio AGC .............................................................................. 55  
Selecting the Bar Antenna ........................................................................ 55  
Tuning the Bar Antenna ........................................................................... 55  
Adjusting the Display Contrast .................................................................. 56  
Initializing the Scanner’s Memory ............................................................. 56  
Connecting Your Scanner to a Personal Computer .................................. 56  
Using the Cloning Options ........................................................................ 57  
Wired Cloning ........................................................................................ 57  
On-Air Cloning ....................................................................................... 58  
Programming Radio Systems ....................................................................60  
Quickly Programming Racing Systems .....................................................61  
Manually Programming Racing Systems ......................................................63  
Editing the Car ........................................................................................64  
Entering/Editing a Car Number ...............................................................64  
Editing a Driver .......................................................................................65  
Setting a Car’s Quick Key .............................................................................65  
Editing a Car’s Channel ..........................................................................66  
Deleting a Car .........................................................................................66  
Setting Lockout On a Car .......................................................................66  
Programming Conventional Systems ........................................................67  
Entering/Editing Conventional Channel Groups .....................................67  
Entering/Editing Conventional Channels ................................................68  
Programming Motorola Systems .............................................................. 69  
Setting System Frequencies ...................................................................70  
Setting Modulation ..................................................................................71  
Setting Attenuation .................................................................................71  
Entering/Editing Motorola Channel Groups ............................................72  
Entering/Editing Motorola Channels .......................................................72  
Programming EDACS Systems ................................................................ 73  
Setting System Frequencies .................................................................. 74  
Entering/Editing EDACS Channel Groups ............................................. 75  
Entering/Editing EDACS Channels ........................................................ 75  
Programming LTR Systems ...................................................................... 76  
Setting System Frequencies .................................................................. 77  
Entering/Editing LTR Channel Groups .................................................. 77  
Entering/Editing LTR Channels/Talkgroups ........................................... 78  
Programming/Editing Optional Settings ................................................. 80  
System-Level Settings .............................................................................. 80  
Editing the System Name .......................................................................80  
Editing the System Quick Key ................................................................81  
Setting System Lockout ..........................................................................81  
Setting the System Hold Time ................................................................82  
Setting the Channel Delay Time .............................................................82  
Setting ID Scan/Search (Trunked Systems Only) ...................................83  
Editing the Fleet Map (Motorola Systems Only) .....................................83  
Setting the Motorola Status Bit (Motorola Systems Only) .......................84  
Setting the End Code Operation (Motorola Systems Only) ....................85  
Setting I-Call (Motorola and EDACS Systems Only) ..............................85  
Setting Emergency Alert (Motorola and EDACS Systems Only) ...........86  
Setting Control-Channel Only (Motorola Systems Only) ........................86  
Reviewing Locked Out Frequencies .......................................................87  
Contents  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clearing All Locked-Out IDs .................................................................. 87  
Setting the EDACS ID Format (EDACS Systems Only) ........................ 87  
Setting System Attenuation (Trunked Systems Only) ............................ 88  
Deleting Systems ................................................................................... 88  
Copying Systems ................................................................................... 89  
Group-Level Settings ................................................................................ 89  
Entering/Editing the Group Name .......................................................... 89  
Setting the Group Quick Key ................................................................. 90  
Setting Group Lockout ........................................................................... 90  
Deleting Groups ..................................................................................... 91  
Channel-Level Settings ............................................................................. 91  
Editing the Channel Name ..................................................................... 91  
Editing Frequencies (Conventional Channels Only) .............................. 92  
Setting Channel Priority (Conventional Channels Only) ........................ 92  
Setting Channel Alert ............................................................................. 93  
Editing the Talk Group ID (Trunked Channels Only) ............................. 94  
Setting CTCSS/DCS (Conventional Channels Only) ............................. 94  
Setting the System Frequency Modulation ............................................ 95  
Setting Channel Attenuation (Conventional Channels Only) ................. 96  
Setting Channel Lockout ........................................................................ 96  
Deleting Channels ................................................................................. 97  
Copying/Pasting Channels .................................................................... 97  
Searching and Storing .............................................................................. 99  
Service Search ......................................................................................... 99  
Quick Search ...........................................................................................100  
CTCSS/DCS Search ...............................................................................100  
Custom Search ........................................................................................101  
Editing a Custom Search Range .........................................................102  
Editing a Service Search ......................................................................103  
Auto Search and Store ............................................................................104  
Selecting a System ...............................................................................105  
Storing a Conventional System ............................................................105  
Storing a Trunked System ....................................................................106  
Using the Close Call Feature .................................................................. 107  
Setting Close Call Options ...................................................................... 108  
Close Call Hits ........................................................................................ 110  
Search and Close Call Options .............................................................. 111  
Managing Locked-Out Frequencies ........................................................ 111  
Unlocking All Frequencies ...................................................................111  
Reviewing Locked Out Frequencies ....................................................111  
Searching for Subaudible Tones ............................................................ 111  
Screening Out Broadcast Sources ......................................................... 112  
Finding Repeater Output Frequencies .................................................... 113  
Setting the Maximum Auto Store Value .................................................. 114  
Setting the Modulation Type ................................................................... 114  
Setting Attenuation ................................................................................. 114  
Setting Data Skip .................................................................................... 115  
Setting the Delay Time ........................................................................... 115  
Setting the Search Frequency Step ........................................................ 116  
Using Weather Alert (SAME) ................................................................... 117  
Searching For a Weather Broadcast ...................................................... 117  
Turning Weather Alert On/Off ................................................................. 117  
Programming a SAME Group ................................................................. 118  
Setting WX Alert Priority ......................................................................... 119  
Using Tone-Out ........................................................................................ 120  
Fire Tone-Out Introduction ...................................................................... 120  
Setting Tone-Out Standby ...................................................................120  
Setting Up Tone-Out ............................................................................120  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance ............................................................................. 123  
General Use ............................................................................................ 123  
Location .................................................................................................. 123  
Cleaning ................................................................................................. 123  
Repairs ................................................................................................... 124  
Birdies ..................................................................................................... 124  
Troubleshooting ...................................................................................... 125  
Specifications .......................................................................................... 129  
Optional Accessories .............................................................................. 132  
Appendix .................................................................................................. 133  
Preset Fleet Maps ................................................................................... 133  
User Defined Fleet Maps ........................................................................ 135  
Type I Programming Information ......................................................... 135  
Size Code Restrictions ........................................................................ 136  
Planning .................................................................................................... 137  
Collecting Information ............................................................................. 137  
Filling Out The Conventional System Worksheet ................................... 139  
System Name and Quick Key .............................................................. 139  
Group Name and Quick Key ................................................................ 139  
Frequency-Alpha Tag-Priority-CTCSS/DCS ........................................ 139  
Filling Out The Motorola Worksheet ....................................................... 139  
System Name and Quick Key .............................................................. 139  
System Type ........................................................................................ 140  
System Frequencies ............................................................................ 140  
Fleet Map (Type I or Type I/Type II Hybrid Only) ................................ 140  
Band Plan (VHF or UHF Only) ............................................................. 141  
Group Name and Quick Key ................................................................ 141  
Talk Group ID-Alpha Tag-Alert ............................................................ 141  
Filling Out the LTR and EDACS Worksheet ........................................... 141  
System Name and Quick Key .............................................................. 141  
System Frequencies and LCN ............................................................. 142  
Group Name and Quick Key ................................................................ 142  
Talk Group ID-Alpha Tag-Alert ............................................................ 142  
Conventional System Worksheet ............................................................ 143  
Motorola System Worksheet ................................................................... 144  
LTR/EDACS System Worksheet ............................................................ 146  
Preprogrammed Systems ....................................................................... 148  
One-Year Limited Warranty .................................................................... 151  
Contents  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
The FCC Wants You to Know  
This scanner has been tested and found to comply  
The FCC Wants You to Know  
with the limits for a scanning receiver, pursuant to Part  
15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
interference in a residential installation. This scanner  
generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference  
to radio communications.  
There is no guarantee that interference will not occur  
in a particular installation. If this scanner does cause  
harmful interference to radio or television  
reception, which can be determined by turning the  
scanner on and off, you are encouraged to try to  
correct the interference by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna  
• Increase the separation between the scanner and  
the receiver  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
1) This device may not cause harmful interference,  
and 2) this device must accept any interference  
received, including interference that may cause  
undesired operation.  
Scanning Legally  
Your scanner covers frequencies used by many  
different groups, including police and fire departments,  
ambulance services, government agencies, private  
companies, amateur radio services, military operations,  
pager services, and wireline (telephone and telegraph)  
service providers. It is legal to listen to almost every  
transmission your scanner can receive. However, there  
are some transmissions that you should never  
intentionally listen to. These include:  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Telephone conversations (cellular, cordless, or  
other private means of telephone signal  
transmission)  
• Pager transmissions  
• Any scrambled or encrypted transmissions  
According to the Electronic Communications Privacy  
Act (ECPA), you are subject to fines and possible  
imprisonment for intentionally listening to, using, or  
divulging the contents of such a conversation unless  
you have the consent of a party to the conversation  
(unless such activity is otherwise illegal). This scanner  
has been designed to prevent the reception of cellular  
telephone transmissions and the decoding of  
scrambled transmissions. This is done to comply with  
the legal requirement that scanners be manufactured  
so they are not easy to modify to pick up these  
transmissions. Do not open your scanner’s case to  
make any modifications that could allow it to pick up  
transmissions that are illegal to monitor. Modifying or  
tampering with your scanner’s internal components or  
using it in a way other than as described in this manual  
could invalidate your warranty and void your FCC  
authorization to operate it.  
In some areas, mobile and/or portable use of this  
scanner is unlawful or requires a permit. Check the  
laws in your area. It is also illegal in many areas (and a  
bad idea everywhere) to interfere with the duties of  
public safety officials by traveling to the scene of an  
incident without authorization.  
A license is required to use this product in Canada.  
The FCC Wants You to Know  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Your Bearcat BR330T scanning receiver is a state-of-the-art  
Introduction  
scanner radio with TrunkTracker III, extended frequency,  
and racetrack operation. You can store frequencies such as  
police, fire/emergency, marine, air, amateur, and other communi-  
cations into the scanner. You can carry it with you wherever you  
go. You can use the scanner’s scroll control to quickly select  
channels and frequencies, and you can automatically program  
channels in a system using the AutoStore feature. Use your  
scanner to monitor:  
Analog trunked public safety systems *  
Police and fire departments (including rescue and  
paramedics)  
NOAA weather transmissions  
Business/Industrial radio and utilities  
Marine and amateur (ham radio) bands  
Air band  
Railroad  
Your scanner can monitor the following bands.  
Frequency (MHz)  
Lower Edge Upper Edge Modulation Step (kHz)  
Type  
Longwave  
AM Broadcast  
Shortwave Radio  
Petro Prod/Bcst Pickup  
CB Class D  
Business/Forest Prod  
10 Meter Amateur  
VHF Low  
6 Meter Amateur  
VHF TV Bcst 2-4  
Intersystem/Astronomy  
VHF TV Bcst 5-6  
FM Broadcast  
0.1000  
0.5300  
1.705  
0.5250  
1.700  
24.995  
AM  
AM  
AM  
5.0  
10.0  
5.0  
25.0000  
26.9650  
27.4100  
28.0000  
29.7000  
50.0000  
54.0000  
72.0000  
76.0000  
88.0000  
108.0000  
137.0000  
144.0000  
148.0000  
150.8000  
162.0000  
174.0000  
216.0000  
225.0000  
400.0000  
406.0000  
420.0000  
450.0000  
470.0000  
512.0000  
764.0000  
776.0000  
794.0000  
806.0000  
849.0125  
894.0125  
956.0250  
26.9600  
27.4050  
27.9950  
29.6800  
49.9900  
53.9800  
71.9500  
75.9950  
87.9500  
107.9000  
136.9750  
143.9875  
147.9950  
150.7875  
161.9950  
173.9875  
215.9500  
224.9800  
399.9500  
405.9875  
419.9875  
449.9875  
469.9875  
511.9875  
763.9500  
775.9875  
793.9500  
805.9875  
823.9875  
868.9875  
956.0000  
1300.0000  
AM  
AM  
AM  
5.0  
5.0  
5.0  
NFM  
NFM  
NFM  
WFM  
FM  
WFM  
WFM  
AM  
20.0  
10.0  
20.0  
50.0  
5.0  
50.0  
100.0  
25.0  
12.5  
5.0  
Aircraft  
Military Land Mobile  
2 Meter Amateur  
Military Land Mobile  
VHF High  
Federal Government  
VHF TV Bcst 7-13  
1.25 Meter Amateur  
UHF Aircraft  
Miscellaneous  
Fed Gov Land Mobile  
70 cm Amateur  
UHF Standard  
UHF TV  
UHF TV  
Public Service  
UHF TV  
Public Service  
Public Service  
Public Service  
Public Service  
25 cm Amateur Band  
NFM  
NFM  
NFM  
NFM  
NFM  
WFM  
NFM  
AM  
NFM  
NFM  
NFM  
NFM  
NFM  
WFM  
NFM  
WFM  
NFM  
NFM  
NFM  
NFM  
NFM  
12.5  
5.0  
12.5  
50.0  
20.0  
50.0  
12.5  
12.5  
12.5  
12.5  
12.5  
50.0  
12.5  
50.0  
12.5  
12.5  
12.5  
12.5  
25.0  
®
®
®, ®  
* Motorola , SMARTNET ,SMARTZONE and PRIVACY PLUS ,  
®
M/A-COM Private Radio Systems Inc. EDACS Wide, Narrow, and SCAT, and  
E.F. Johnson Co. LTR systems.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Feature Highlights  
General  
Feature Highlights  
2500 Dynamic Channels - Your scanner stores  
channels more efficiently than conventional scanners,  
letting you store and quickly tune greater numbers of  
interesting frequencies.  
Close CallTM RF Capture Technology - You can set  
the scanner so it detects and provides information  
about nearby radio transmissions. See “Using the  
Close Call Feature” on Page 107 for more information.  
Dynamically Allocated Channel Memory - Your  
scanner’s memory is organized so that it more closely  
matches how radio systems actually work, making it easier  
to program and use your scanner and determine how much  
memory you have used and how much you have left.  
Preprogrammed Systems - Your scanner is  
preprogrammed with over 1000 channels covering  
police, fire, and ambulance operations in the 25 most  
populated counties in the US as well as many major  
races. A complete list of the scanner’s preprogrammed  
systems is in “Preprogrammed Systems” on Page 148.  
99 Quick Keys – You can set the scanner so you can  
quickly select systems and groups by using the  
keypad. This makes it easy to listen to or quickly lock  
out those systems or groups you don’t want to scan.  
Race Track Operation – You can set the scanner to  
scan races using a frequency list or preprogrammed  
into the scanner. You can scan by car number and  
driver name, assign the car to a quick key, and set the  
scanner so it sounds an alert when the car you are  
scanning transmits.  
13 Service Searches - frequencies are preset in  
separate Public Safety, News, HAM Radio, Marine,  
Railroad, Air, CB Radio, FRS/GMRS, Racing, Special,  
AM Broadcast, FM Broadcast, and TV Broadcast  
searches, to make it easy to search and scan for  
specific transmissions.  
Lockout – You can lock out any system, group,  
frequency, or channel while scanning or searching.  
Feature Highlights  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you lock out a system or group, any channels  
belonging to that system or group are also locked out.  
You can lock out up to 200 frequencies and review all  
locked-out frequencies. The scanner skips locked-out  
frequencies while using the Close Call feature or while  
searching.  
CTCSS and DCS Squelch Modes – prevent interfer-  
ence from stations not using the mode you select.  
Fire Tone-Out Standby – Lets you set the scanner to  
alert you if a two-tone sequential page is transmitted.  
You can set up to 10 settings (transmit frequency, tone  
frequencies) then select one for standby monitoring.  
Broadcast Screen – Sets the scanner so it ignores  
Close CallTM or search hits on known broadcast  
frequencies including pager frequencies.  
Custom Screen – Lets you input up to 10 frequency  
ranges that the scanner will ignore during Close CallTM  
or search operation.  
Dropout Delay You can set whether the scanner pauses  
at the end of a transmission to wait for a reply. You can  
set the delay time for each system you scan, and while  
searching and using the Close CallTM feature.  
Built-In Bar Antenna – Lets you clearly listen to AM  
radio broadcasts.  
Attenuator – You can set the scanner’s attenuator to  
reduce the input strength of strong signals by about 18 dB.  
Repeater Reverse – You can set the scanner so it  
switches to the input frequency on a conventional  
repeater system.  
Channel Alert – You can set the scanner so it alerts  
you when there is activity on any channel you specify.  
Memory Check – Lets you see at a glance how much  
total memory is left.  
Scan and Search Operation – Lets you include  
selected service searches or custom search ranges  
during normal scan operation.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Custom Alerts – For each alert in the scanner (such as  
channel alert, Close Call alert, emergency alert), you can  
select from 9 different tone patterns and also set the alert  
volume level independently from the main volume level.  
Automatic Channel Step – Accepts frequencies on  
any valid channel step, even if it does not fall within  
the band plan’s default step.  
Frequency Step – Lets you select a frequency step  
(5, 6.25, 7.5, 8.33, 9, 10, 12.5,15, 20, 25, 50 or 100  
kHz) for manual mode and chain search mode. The  
scanner’s auto step feature lets you set the scanner so it  
automatically chooses the correct step.  
Quick Recall – Lets you quickly select a specific  
channel by choosing the system, group, and channel.  
Scan/Search Delay – You can set the scanner so it  
remains on a frequency up to 5 seconds after the last  
transmission to wait for a possible reply.  
Text Tagging – You can name each system, group,  
channel, talk group ID, custom search range, and  
SAME group, using up to 16 characters per name.  
Unique Data Skip – Allows your scanner to skip  
unwanted data transmissions and reduces birdies.  
Duplicate Frequency Alert – Alerts you if you try to enter  
a duplicate name or frequency already stored in a system.  
Memory Backup – If power is lost or disconnected,  
the scanner retains the frequencies you programmed  
in its memory.  
Note: The scanner’s frequency coverage is not  
continuous and does not include the cellular telephone  
bands.  
Trunk Tracking  
Trunk Tracker III Operation – Follows unencrypted  
conversations on analog Motorola, EDACS, EDACS  
SCAT, and LTR trunked radio systems, including  
systems in VHF, UHF, 800 MHz, and 900 MHz bands.  
Feature Highlights  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The scanner can scan both conventional and trunked  
systems at the same time.  
Control Channel Only Scanning – If the scanner is  
set to scan Motorola trunking frequencies, you can set  
it so it scans using only control channel data. You do  
not have to program voice channel frequencies into  
memory in this mode as long as all possible control  
channels are programmed.  
Weather  
Weather Search – Lets your scanner receive your  
local NOAA weather transmission.  
SAME Weather Alert – Lets your scanner alert you when  
a SAME weather alert is transmitted on a NOAA weather  
channel. The scanner also displays the transmitted  
alert type. This helps you quickly find out about severe  
weather in your area and lets you avoid false alarms.  
WX Priority – Lets your scanner alert you when a SAME  
weather priority alert is transmitted on a NOAA weather  
channel.  
Search  
Service Search – Lets you quickly select and search  
the scanner’s preprogrammed frequencies.  
Custom Search – Lets you program up to 10 custom  
search ranges. You can search any of these ranges  
simultaneously.  
CTCSS/DCS Search – Lets the scanner search for  
CTCSS or DCS tones. You can identify up to 50  
CTCSS tones and 104 DCS tones.  
Quick Search – Lets you search from the currently-tuned  
frequency if you are searching a conventional system.  
Auto Store  
Frequency AutoStore – Automatically stores all active  
frequencies into the selected conventional system.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Talk Group ID AutoStore – Automatically stores all  
new talk group ID’s into a channel group you select.  
Priority  
Priority Scan – Priority channels let you keep track of  
activity on your most important channel(s) while  
monitoring other channels for transmissions.  
Priority Plus – You can set the scanner so it scans  
only the priority channels  
Backlight and Power  
Display and Keypad Backlight – Makes the display and  
keypad easy to see in dim light. You can adjust the  
back light so it turns on when you press a key, when  
squelch breaks during a transmission, or manually.  
Low Battery Alert – The scanner alerts you if the  
batteries need to be recharged or replaced.  
Battery Save – You can set the scanner so it reduces  
the amount of power it needs if there are no transmissions.  
Key Controls  
Key Lock – You can deactivate the scanner’s keys to  
help prevent accidentally changing the scanner’s  
programming.  
PC Control and Cloning  
PC Control You can transfer programming data to and  
from your scanner and your personal computer, and  
control the scanner using a computer. This helps you  
find frequencies listed on the Internet and load them  
into the scanner. Free PC control and programming  
software will be available at http://www.uniden.com.  
Clone Mode – You can clone all programmed data,  
including the contents of the scanner’s memory, menu  
settings, and other parameters from one BR330T  
scanner to another BR330T scanner.  
On-Air Cloning – You can clone all programmed data  
over the air from a PC to one or more BR330T  
scanners.  
Feature Highlights  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About This Manual  
The screen displays used in this manual are  
representations of what might appear when you use  
your scanner. Since what you see depends on the  
frequencies and user IDs for your area and the  
settings you select, you might notice some differences  
between what is in this manual and what appears on  
your scanner.  
Using the Multifunction Scroll Control  
The scroll control on top of the BR330T lets you  
easily control channel selection, volume, and squelch,  
and how information appears on the display.  
To adjust menu settings, change channels in Hold  
mode, and resume scanning: Simply rotate the  
scroll control.  
To change the scanner’s volume: Briefly press the  
scroll control once, then rotate it. VOLUME LEVEL and  
the current volume level appear on the display.  
Func  
To adjust the squelch: While holding down  
on  
the left side of the scanner, briefly press the scroll  
control once then rotate it. SQUELCH LEVEL and the  
current squelch level appear on the display.  
Entering Text  
To enter a letter, turn the scroll control until the  
character you want appears, To enter a number, press a  
number key. To enter a decimal point, press  
.
To move the cursor to the left, press /4. To move the  
cursor to the right, press 6/ .  
To clear a character, press twice. To clear all  
characters, press three times.  
To accept an entry, press down on the scroll control or  
press E.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How the Scanner’s Controls Are  
Represented in This Manual  
To help navigate the scanner’s menus, the steps  
shown in this manual show the displays you see and  
the keys you press or control you operate to get a  
desired result.  
This example shows you how to use the scanner’s  
menu to edit an existing system name. It shows you  
Menu  
the key to press (  
) to select a menu option and  
the option you see (Program System) when you  
Menu  
press  
. It also instructs you to turn the scroll  
control (shown as ) to view a series of choices then  
press the scroll control (shown as ) to select a choice  
(Edit Name).  
Menu  
Program Systemꢁ  
Select the system ꢁ  
Edit Name ꢁ  
Follow these steps to enter/edit the system name.  
1. The first character of the system name is covered  
by a cursor. Rotate the scroll control to select the  
character you want.  
2. Press 6/ on the keypad to select the next  
character. The cursor moves to the next character.  
To move the cursor to a previous character, press  
/4.  
3. Repeat Steps 1 and 2 until you have entered the  
system name. Then press down on the scroll  
control or press E to accept the setting.  
Hints:  
• Each system name can be up to 16 characters.  
Abbreviate as necessary to fit.  
Feature Highlights  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• The default system names include the following  
letter in the 16th position to indicate the system  
type:  
R= Racing  
M= Motorola  
E= EDACS  
L= LTR  
C= Conventional  
• Press twice to delete the current character.  
• Press three times to clear the entire alpha tag.  
To get the most from this manual, review the contents  
to become familiar with the basic functions available.  
If you are new to scanning or trunk tracking, be sure to  
read “Understanding Scanning” on Page 19 for a quick  
background on the technology. The first thing you’ll  
need to do is install batteries in the scanner. Then you  
need to connect the included antenna to the scanner.  
See “Setting Up Your Scanner” on Page 32 if you  
need any help doing this.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Understanding Scanning  
TUhnisdseecrtisontapnrodviidnesgyoSucwaitnh nbaicnkgground on how  
scanning works. You don’t really need to know all of  
this to use your scanner, but some background  
knowledge will help you get the most from your  
BR330T.  
Understanding the Scanner’s  
Memory  
Your scanner’s memory is organized in an architecture  
called Dynamic Allocated Channel memory. This type  
of memory is organized differently and more efficiently  
than the bank/channel architecture used by traditional  
scanners. Dynamic Allocated design matches how  
radio systems actually work much more closely, making  
it easier to program and use your scanner and deter-  
mine how much memory you have used and how much  
you have left.  
Instead of being organized into separate banks and  
channels, your scanner’s memory is contained in a  
pool. You simply use as much memory as you need in  
the pool to store as many frequencies, talk group ID’s,  
and alpha tags as you need. No memory space is  
wasted, and you can tell at a glance how much  
memory you have used and how much remains.  
With a traditional scanner, when you program it to  
track a trunked system, you must first program the  
frequencies. Since you can only program one trunking  
system per bank in a traditional scanner, if there were  
(for example) 30 frequencies, the remaining channels  
in the bank are not used and therefore wasted. Also,  
since some trunked systems might have hundreds of  
talk groups, you would have had to enter those types  
of systems into multiple banks in order to monitor and  
track all the ID’s.  
What is Scanning?  
Unlike standard AM or FM radio stations, most two-  
way communications do not transmit continuously.  
Your BR330T scans programmed channels until it  
Understanding Scanning  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
finds an active frequency, then stops on that frequency  
and remains on that channel as long as the  
transmission continues. When the transmission ends,  
the scanning cycle resumes until the scanner receives  
another transmission.  
What is Searching?  
The BR330T can search each of its bands and up to  
10 bands together to find active frequencies. This is  
different from scanning because you are searching for  
frequencies that have not been programmed into the  
scanner. When you select frequency bands to search,  
the scanner searches for any active frequency within  
the lower and upper limits you specify. When the  
scanner finds an active frequency, it stops on that  
frequency as long as the transmission lasts. If you  
think the frequency is interesting, you can program it  
into the scanner’s memory. If not, you can continue to  
search.  
What is CTCSS/DCS?  
Your scanner can monitor systems using a Continuous  
Tone Coded Squelch System (CTCSS) and Digital  
Coded Squelch (DCS) system, which allow squelch to  
open only when the tone you have programmed with a  
specific frequency is received along with a  
transmission.  
CTCSS and DCS are subaudible tone signaling  
systems sometimes referred to as PL or DPL  
(Motorola’s trademarked terms for Private Line and  
Digital Private Line respectively). CTCSS and DCS  
are used only for FM signals and are usually  
associated with both amateur and commercial two-  
way frequencies. These systems make use of a  
special subaudible tone that accompanies a  
transmitted signal.  
CTCSS and DCS are used for many purposes. In  
many cases, CTCSS and DCS are used to restrict  
access to a commercial repeater, so that only those  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
units which transmit the correct tone along with their  
signal can “talk” to the repeater.  
CTCSS and DCS are also used in areas that receive  
interference where there are several stations with  
output frequencies close to each other. When this  
occurs, you might hear multiple communications on  
the same frequency. The stations might even interfere  
with each other to the point where it is impossible to  
clearly receive any of the stations. A scanner  
equipped with CTCSS and DCS (like your scanner)  
can code each received frequency with a specific  
CTCSS or DCS frequency. Then, when you receive  
multiple signals, you only hear the transmission with  
the CTCSS or DCS tone you programmed. If you do  
not receive the correct tone with a signal, the  
scanner’s squelch remains closed and you hear  
nothing.  
You can search for the following CTCSS frequencies  
and DCS codes.  
CTCSS Frequencies (Hz)  
67.0  
82.5  
69.3  
85.4  
71.9  
88.5  
74.4  
91.5  
77.0  
94.8  
79.7  
97.4  
100.0 103.5 107.2 110.9 114.8 118.8  
123.0 127.3 131.8 136.5 141.3 146.2  
151.4 156.7 159.8 162.2 165.5 167.9  
171.3 173.8 177.3 179.9 183.5 186.2  
189.9 192.8 196.6 199.5 203.5 206.5  
210.7 218.1 225.7 229.1 233.6 241.8  
250.3 254.1  
DCS Codes (Octal)  
023 025 026 031 032 036 043 047  
051 053 054 065 071 072 073 074  
114 115 116 122 125 131 132 134  
143 145 152 155 156 162 165 172  
Understanding Scanning  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
174 205 212 223 225 226 243 244  
245 246 251 252 255 261 263 265  
266 271 274 306 311 315 325 331  
332 343 346 351 356 364 365 371  
411 412 413 423 431 432 445 446  
452 454 455 462 464 465 466 503  
506 516 523 526 532 546 565 606  
612 624 627 631 632 654 662 664  
703 712 723 731 732 734 743 754  
Conventional Scanning  
Conventional scanning is a relatively simple concept.  
Each group of users in a conventional system is  
assigned a single frequency (for simplex systems) or  
two frequencies (for repeater systems). Any time one  
of them transmits, their transmission always goes out  
on the same frequency. Up until the late 1980s, this  
was the primary way that radio systems operated.  
Even today, there are many 2-way radio users who  
operate using a conventional system:  
• Aircraft  
• Amateur radio  
• FRS/GMRS users  
• Broadcast AM/FM/TV stations  
• Many business radio users  
When you want to store a conventional system, all you  
need to know is the frequencies they operate on.  
When you are scanning a conventional system, the  
scanner stops very briefly on each channel to see if  
there is activity. If there isn’t, the scanner quickly  
moves to the next channel. If there is, then the  
scanner pauses on the transmission until it is over.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Simplex Operation  
Simplex systems use a single frequency for both  
transmit and receive. Most radios using this type of  
operation are limited to line-of-sight operation. This  
type of radio is frequently used at construction job  
sites, and with inexpensive consumer radios such as  
GMRS/FRS radios. The range is typically 1-8 miles,  
depending upon the terrain and many other factors.  
Repeater Operation  
Repeater systems use two frequencies: one transmits  
from the radio to a central repeater; the other transmits  
from the repeater to other radios in the system. With a  
repeater-based system, the repeater is located on top  
of a tall building or on a radio tower that provides great  
visibility to the area of operation. When a user  
transmits (on an input frequency), the signal is picked  
up by the repeater and retransmitted (on an output  
frequency). The user’s radios always listen for activity  
on the output frequency and transmit on the input  
frequency. Since the repeater is located very high,  
there is a very large line of sight.  
Typical repeater systems provide coverage out to  
about a 25-mile radius from the repeater location.  
Understanding Scanning  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What is Trunk Tracking?  
Your BR330T is designed to track the following types  
of trunking systems.  
• Motorola Type I, Type II, Type IIi hybrid,  
SMARTNET, and PRIVACYPLUS analog trunking  
systems, which are extensively used in 800 MHz  
communication systems.  
• LTR trunking systems  
• EDACS SCAT trunking systems  
• EDACS trunking systems  
When tracking these types of systems, you might want  
to remember that your scanner can track more than  
one trunking system at a time and scan conventional  
and trunked systems at the same time.  
Conventional scanning is a simple concept. You enter  
a frequency used by someone you want to monitor into  
your scanner’s memory. For example, the police in your  
area might transmit on 460.500 MHz, the fire department  
on 154.445 MHz, the highway department on 37.900  
MHz, etc. So when your scanner stops on a frequency,  
you usually know who it is, and more importantly, you  
can stop on a channel and listen to an entire  
conversation. This type of scanning is easy and fun.  
However, as the demand for public communications  
has increased, many public radio users do not have  
enough frequencies to meet their needs, creating a  
serious problem. Trunking radio systems help solve  
this problem.  
Trunked Scanning  
While conventional scanning worked great while there  
were only a few groups wanting to use the  
frequencies, with the advent of smaller, lower-cost  
radios more and more agencies and businesses  
wanted to take advantage of the utility of 2-way radio.  
As a result, the bands that were used most became  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
full, so new users were not able to take advantage of  
the technology as quickly as they wanted.  
Trunking solved this frequency shortage by allowing  
multiple groups to use the same set of frequencies in a  
very efficient way. While each type of trunking system  
operates a little differently (see the next few sections),  
they all work on the same basic premise: even in a  
system with a lot of users, only a few users are ever  
transmitting at any one time.  
Instead of being assigned a frequency, as with  
conventional systems, each group is assigned a talk  
group ID. A central computer controls the frequency  
each group operates on...and this frequency selection  
is made each time a user transmits. So, while on a  
conventional system queries, replies, and follow-ups  
are all on a single frequency, they could each be on  
completely different frequencies on a trunked system.  
This semi-random frequency assignment made  
monitoring such a system impossible prior to Uniden’s  
invention of the TrunkTracker scanner.  
Not only does your BR330T scan channels like a  
conventional scanner, it actually follows the users of a  
trunked radio system. Once you know a talk group’s  
ID, you won’t miss any of the action.  
If you are a new scanner enthusiast, you might want to  
read the first part of this manual and use your scanner  
in conventional mode before you begin trunk tracking.  
Understanding scanning fundamentals and  
terminology will make trunk tracking much easier. If  
you are already an experienced scanner operator, you  
might want to go to “Programming Motorola Systems”  
on Page 69, “Programming EDACS Systems” on  
Page 73, or “Programming LTR Systems” on Page 76  
now.  
Understanding Scanning  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Types of Trunking Systems  
Trunking systems divide a few frequencies among  
many different users, but the way that each system  
does this is slightly different. This section describes  
some of the technical data behind Motorola, EDACS,  
and LTR trunked radio systems.  
Motorola Trunking  
While there are different types of Motorola trunking  
systems, they all use the same basic trunking method.  
The system consists of one control channel (or as  
many as 4 per system but only one is active at any  
one time), plus one or more voice channels (typically  
10, 20, or 28 total channels). When a user presses  
Push To Talk (PTT) to transmit, their radio first sends  
their talk group information to the control channel.  
The computer then assigns that talk group to a specific  
voice channel and transmits that data over the control  
channel. All radios in that talk group switch over to the  
assigned voice channel and the user can begin speak-  
ing. This all typically takes place in about a sec-  
ond...the person transmitting hears a beep from their  
radio when the channel is assigned and then it is OK  
to start talking.  
The systems in use are:  
Motorola Type I – the radios send the radio ID, the  
fleet and subfleet talk group ID to the control channel  
each time they transmit. To program a Type I system,  
you need to know the system’s fleet map. The most  
common fleet maps are included in “Preset Map 1 Pre-  
set Map 2” on Page 133. You can also find fleet map  
resources on the web.  
Motorola Type II – the radios only send the radio ID  
and radio channel code to the control channel. The  
central computer keeps a database of radio ID’s and  
which talk group is assigned to which channel code for  
each radio, so with this system the user’s radio sends  
only about 1/3 the data as a Type I system with each  
transmission. Type II systems do not use Fleet-  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
subfleet talk groups; instead they use a 5-digit ID for  
each talk group.  
Type IIi Hybrid — these systems support a mix of both  
Type I and Type II users. Like Type I systems, you  
must know the system’s fleet map to ensure proper  
tracking.  
EDACS Trunking  
EDACS trunking works in much the same way as  
Motorola trunking with a couple of major differences.  
In an EDACS system, each frequency used by the  
system is assigned a Logical Channel Number (LCN)  
so that less data needs to be transmitted by the  
control channel. Also, talk groups are assigned in an  
Agency-Fleet-Subfleet (AFS) hierarchy. Also, there is  
one variation of EDACS called SCAT that your  
BR330T can monitor.  
Logical Channel Numbers – each frequency used by  
the system is assigned an LCN. This information is  
programmed into each user radio. When a user  
presses PTT, their radio sends their AFS information  
to the control channel. The computer then assigns that  
talk group to a channel and sends the LCN so that all  
other radios in that talk group will switch to the correct  
channel. To program an EDACS system in your  
scanner, you will need to know both the frequencies  
used by the system and the LCN for each frequency.  
Agency-Fleet-Subfleet – talk group ID’s for EDACS  
systems are assigned in a way that makes it easy to  
see at a glance the affiliation of the user. Each radio is  
assigned a 2-digit agency identifier from 00 – 15.  
For example, 01 might be used by the police, 02 by  
the ambulance service, 03 by the fire department, and  
so on. Each agency is then subdivided up to 16 times  
to provide fleet identification, and then 8 more times to  
identify subfleets.  
For example, the complete AFS for the Police  
Department West District’s dispatch channel might be  
Understanding Scanning  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01-062. 01 identifies the agency as the police  
department, 06 identifies the fleet as the West district,  
and 2 identifies the subfleet as the dispatch channel.  
While these assignments are somewhat arbitrary and  
vary from system to system, there are many resources  
on the web for finding the assignments for most  
systems. Because of the logical hierarchy of the AFS  
system, your BR330T lets you assign wildcard ID’s  
that let you, for example, use only one ID memory to  
identify all units in either an agency or a fleet.  
EDACS SCAT – EDACS SCAT (Single Channel  
Autonomous Trunking) systems operate on a single  
channel and alternate control data with analog voice  
traffic. While your BR330T cannot track ID’s in this  
system, it can eliminate the control data so that all you  
hear is the voice transmissions when you monitor this  
type of system.  
LTR Trunking  
LTR (Logic Trunked Radio) systems are trunking  
systems used primarily by business or private  
communications service providers, such as taxicabs,  
delivery trucks, and repair services. These systems  
encode all control information as digital subaudible  
data that accompanies each transmission, so there is  
no separate control channel. Users on an LTR system  
are assigned to specific talk groups, which are  
identified by the radio as six digit numbers.  
These numbers are in the form AHHUUU, where:  
A = Area code (0 or 1)  
H = Home repeater (01 through 20)  
U = User ID (000 through 254)  
When the scanner receives a transmission on a  
channel set to the LTR mode, it first decodes the LTR  
data included with the transmission. In the ID search  
mode, the scanner stops on the transmission and  
displays the talk group ID on the display. In the ID scan  
mode, the scanner only stops on the transmission if  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
the LTR data matches a talk group ID that you have  
stored in the talk group ID list and have not locked out.  
LTR systems are frequently programmed so that each  
radio has a unique user ID.  
I-Call (Motorola/EDACS)  
I-calls are direct unit-to-unit transmissions that are not  
heard by other system users. Your BR330T can  
receive I-call transmissions. See “Setting I-Call  
(Motorola and EDACS Systems Only)” on Page 85 for  
more information about monitoring I-call transmissions.  
Where To Get More Information  
By itself, this manual really only provides part of what  
you need to know to have fun scanning – how to  
program and use the scanner.  
Information On The Internet  
The Internet is a great source for current frequencies  
and information about scanning. Many web sites have  
lists of frequencies for your area. You can use a  
search engine to find and use them.  
Make a list of the agencies you want to listen to, then  
look up the frequencies and systems used by those  
agencies. Here are a few useful sites:  
http://www.scannermaster.com * - frequency  
resources and home of Police Call.  
You can also call them at 1 800 SCANNER (hours  
are from 10:00 a.m. to 5:00 p.m. Eastern Time  
Monday through Friday).  
*
http://www.radioreference.com - the Internet's  
premier source for user-supported radio system  
information.  
http://www.bearcat1.com - frequency information  
from National Communications.  
Understanding Scanning  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
*
http://svartifoss2.fcc.gov/reports/index.cfm -  
conventional frequency information on file with the  
US Government  
*
http://groups.yahoo.com/group/BR330T - a  
group for people interested in discussing the  
BR330T.  
* - These web sites are not affiliated with Uniden  
Corporation.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Included With Your Scanner  
Included With Your Scanner  
Connection  
Cable  
Wrist Strap  
AC Adapter  
Batteries  
Scanner  
(with antenna  
attached)  
BR330T  
Belt Clip  
OWNER’S  
MANUAL  
OWNER’S MANUAL  
BNC/SMA Adapter  
Owners  
Manual  
and other  
printed  
material  
If any of these items are missing or damaged,  
immediately contact your place of purchase or Uniden  
Customer Service at: (800) 297-1023, 8:00 a.m. to  
5:00 p.m., Central, Monday through Friday.  
Included With Your Scanner  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up Your Scanner  
These guidelines will help you install and set up your  
Setting Up Your Scanner  
new scanner:  
• If your scanner receives interference or electrical  
noise, move the scanner or its antenna away from  
the source.  
To improve the scanner’s reception, use an  
optional external antenna designed for multi-band  
coverage. (You can purchase this type of antenna  
at a local electronics store). If the optional antenna  
has no cable, use 50-75 Ω coaxial cable for  
lead-in. A mating plug might be necessary for the  
optional antennas.  
• Use an optional mono earphone or mono headset  
with proper impedance (32 Ω) for private listening.  
Read the precautions on the inside front cover of  
this Owners Manual.  
• Do not use the scanner in high-moisture  
environments such as the kitchen or bathroom.  
• Avoid placing the scanner in direct sunlight or near  
heating elements or vents.  
Using Internal Batteries  
You can power your scanner using three alkaline or  
rechargeable AA batteries.  
Before installing batteries, set the switch in the battery  
compartment to match the type of batteries you will  
use. Select ALKALINE for non-rechargeable battery  
types and Ni-MH for rechargeable battery types. See  
also “Using Rechargeable Batteries” on Page 33 when  
you use rechargeable batteries.  
1. Remove the battery cover and set the battery  
switch.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Install 3 AA batteries,  
matching the polarity  
symbols (+ -).  
WARNING!  
Set ALKALINE/Ni-MH to Ni-MH for use only with  
rechargeable batteries. Never attempt to recharge  
non-rechargeable batteries. Non-rechargeable  
batteries can get hot and can even burst if you try to  
recharge them.  
3.Replace the cover.  
When  
flashes and the scanner beeps every 15  
seconds, replace the batteries.  
Using Rechargeable Batteries  
You can also use three rechargeable batteries to power  
your scanner. Before you use rechargeable batteries,  
you must charge them. The scanner has a built-in  
circuit that lets you recharge batteries while they are in  
the scanner. To charge the batteries, set ALKALINE/  
Ni-MH inside the battery compartment to NI-MH,  
install the batteries in the scanner, and connect the  
supplied AC adapter to the scanner's DC 6V jack (see  
“Using AC Power” on Page 34).  
WARNING!  
Do not connect the AC adapter to the scanner if  
non-rechargeable batteries (such as alkaline  
batteries) are installed in the scanner and  
ALKALINE/Ni-MH is set to NI-MH, or if you are  
unsure of the switch's position. Non-rechargeable  
batteries can get hot and can even burst if you try  
to recharge them. Before you use rechargeable  
batteries for the first time, charge them for 14  
hours to bring them to a full charge. Discharged  
batteries take about 14 hours to fully recharge.  
Setting Up Your Scanner  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If an AC adapter is connected to the scanner, the  
scanner checks the condition of the installed batteries.  
If the scanner is turned off and the batteries require a  
full charge, Normal Chargingappears as the bat-  
teries are recharged. When the batteries are fully  
charged, Charge Completeappears.  
If no batteries are installed in the scanner, No Battery  
appears. If there is a problem with the installed batteries,  
Battery Errorappears. If the installed batteries are  
Ni-MH batteries but ALKALINE/Ni-MH is set to  
ALKALINE, Charge Offappears and the scanner  
does not charge the batteries.  
Removing the Display Sticker  
Before you use the scanner, remove the protective  
plastic sticker over the display.  
Using AC Power  
You can power the scanner  
using the supplied 6V,  
800 mA AC adapter.  
To use the scanner on AC  
power, plug the adapter into  
6V 800 mA on the right side  
of the scanner, then plug the  
AC adapter into a standard AC  
outlet.  
If rechargeable batteries are installed and ALKALINE/  
Ni-MH is set to NI-MH, the adapter powers the scanner  
and recharges the installed batteries at the same time.  
WARNING!  
To prevent damage to Ni-MH batteries, never charge  
them in an area where the temperature is above  
113°F (45°C) or below 32°F (0°C).  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Antenna  
To attach the supplied flexible antenna to the  
connector on the top of your scanner, simply screw it  
onto the scanner's SMA connector.  
Connecting an Optional Antenna  
The scanner's SMA connector makes it easy to  
connect a variety of optional antennas, including an  
external mobile antenna or outdoor base station  
antenna.  
Note: Always use 50- or 75-ohm, RG-58, or RG-8,  
coaxial cable and the supplied BNC/SMA adapter to  
connect an outdoor antenna. If the antenna is over 50  
feet from the scanner, use RG-8 low-loss dielectric  
coaxial cable. Cable loss increases with higher frequency.  
Connecting an Earphone/Headphone  
For private listening, you can plug a 1/8-inch (3.5 mm)  
mini-plug earphone or headphones (not supplied) into  
the headphone jack on top of your scanner. This  
automatically disconnects the internal speaker.  
See “Earphone Warning” at the front of the manual for  
important information about using an earphone/  
headphone.  
Connecting an Extension Speaker  
In a noisy area, an optional amplified extension  
speaker, positioned in the right place, might provide  
more comfortable listening. Plug the speaker cable's  
1/8-inch (3.5-mm) mini-plug into your scanner's jack.  
WARNING!  
Never connect anything other than an earphone or  
the recommended amplified extension speaker to  
the scanner’s headphone jack. This might damage  
the scanner.  
Setting Up Your Scanner  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING!  
Never connect any part of the headphone jack to  
the antenna jack or connect the radio to an  
installation where the antenna and audio  
connection are grounded. This might damage the  
scanner.  
Attaching the Belt Clip  
To make your scanner easier to carry when you are on  
the go, use the supplied belt clip. Rotate the scanner  
upside down to remove it from the clip.  
Attaching the Wrist Strap  
To keep your scanner safely close at hand, use the  
supplied wrist strap. Push the small loop on one end of  
the wrist strap through the lug on the right side of the  
scanner, then thread the other end of the wrist strap  
back through the small loop to secure it.  
A Look At The Keypad  
Your scanner's keys have various functions labeled on  
the key tops and below the keys.  
To select the function labeled on a key, simply press  
the key. To select the function labeled below a key,  
Func  
hold down  
on the left side of the scanner then  
press the key.  
appears on the display.  
F
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If your scanner's keys seem confusing at first, the  
following information should help you understand each  
key's function.  
Key Name  
Description  
Hold – Holds the scan or the  
frequency search when pressed.  
Resumes the scan or the  
frequency search when pressed  
again.  
Hold/  
Func  
+
– Quickly turns the  
Close Call feature on or off (see  
“Setting Close Call Options” on  
Page 108).  
Scan/srch  
Scan – Scans the stored channels.  
Func  
+ srch – Starts quick search  
or quickly accesses the  
search menu.  
L/O  
L/O Lets you lock out a selected  
channel or skip a specified frequency.  
Press and hold for more than 2 sec-  
onds to unlock all channels in a system  
or all frequencies in a Search mode  
and Close Call mode. Also use to exit a  
menu.  
Func  
+ L/O – Press quickly to lock  
and unlock a selected system in Scan  
or Scan Hold mode and review search  
lockout frequencies in Search or  
Search Hold mode.  
Setting Up Your Scanner  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Name  
Description  
– Turns the display  
/
/
backlight on or off.  
Press and hold for more than 2  
seconds to turn the scanner on or  
off.  
Func  
+
– Locks and unlocks  
the keypad.  
1-9  
1-9 – Enters a frequency, enters  
quick key numbers, and selects a  
custom search range in Custom  
Search mode.  
Selects systems by quick key in  
scan mode.  
Func  
+ 1-9 – Selects groups by  
quick key in scan mode.  
1/pri  
2/wx  
1 – Enters a 1.  
Func  
+ pri – Selects the priority  
mode in scan hold mode.  
2 – Enters a 2.  
Func  
+ wx – Selects the weather  
function in the menu in the Hold  
mode.  
4 – Enters a 4.  
/4  
Func  
+
– Moves the active  
character to the left while editing data.  
6 – Enters a 6.  
6/  
Func  
+
– Moves the active  
character to the right while editing  
data.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Name  
Description  
7/rcl  
7 – Enters a 7.  
Func  
+ rcl – Displays a series of  
prompts to quickly select a specific  
channel in the scan hold mode.  
no  
– Enters a decimal point or dash  
in a frequency or talk group ID,  
enters or selects an extended 2-  
digit Quick Key, enters an “i” for  
I-Call input.  
/rev  
At a prompt, answers “No.”  
Func  
+ rev – Monitors the  
currently-tuned frequency’s  
reverse frequency.  
E/yes/att  
E – Press to select input and menu  
items, to quickly edit a channel in  
Scan Hold Mode, and store a  
frequency into memory in Scan  
Hold mode.  
At a prompt, answers “Yes.”  
Func  
+ att – Turns the scanner’s  
attenuator on or off for the current  
channel (for conventional systems)  
or system (for trunked systems).  
0 race/car  
0 – Enters a frequency and enters  
quick key numbers.  
race/car – Enters a race number  
and car number.  
A Look At The Display  
The display has indicators that show the scanner's  
current operating status. The display information helps  
you understand how your scanner operates.  
Setting Up Your Scanner  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sn:- appears with a number to show the currently-  
selected System Quick Key number. nappears to  
show the first digit of the Quick Key number.  
For example, if System Quick Key 75 is selected, S7:  
appears. The currently active system indicator flashes.  
ATT- appears when the attenuation feature is turned  
on. See “Setting Attenuation” on Page 71, “Setting  
System Attenuation (Trunked Systems Only)” on  
Page 88, and “Setting Channel Attenuation (Conven-  
tional Channels Only)” on Page 96.  
PRI- appears when the priority feature is turned on  
(see “Priority Scan” on Page 54).  
- appears when you lock the keypad (see  
“Locking/Unlocking the Keypad and Scroll” on  
Page 53).  
- alerts you when the battery power gets low.  
GRP- shows the currently activated group or selected  
group Quick Key number, appears with numbers (0-9).  
The currently active group indicator flashes.  
AM/FM/NFM/WFM- appears to show the type of  
reception mode.  
L/O- appears when you manually select a channel  
you locked out or a skip frequency.  
F
Func  
- appears when you hold down  
to select a  
function.  
- appears when the scanner is set to a Close Call  
feature mode (see “Using the Close Call Feature” on  
Page 107).  
SCAN- scrolls while the scanner is scanning.  
DSKP- appears when data skip is turned on.  
HOLD- appears while the scanner is set to scan or  
search hold mode.  
P
- appears if priority is turned on  
SCR- appears when one or more broadcast screen  
bands are turned on.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- appears to show signal strength (0 to 5).  
REP- appears when repeater find is turned on.  
Using Menu  
Func  
Menu  
Menu  
Press  
on the left side of the scanner to enter the  
menu. See “Using the Menu” on Page 49 for more  
information about the scanner’s menu options.  
Using Func  
To select the function labeled below a key on the front  
Func  
of the scanner, hold down  
on the left side of the  
scanner, then press that key. To hold on a system  
while scanning or temporarily stop on a channel while  
Func  
searching, press  
. To select a system in Scan or  
Func  
Scan Hold mode, hold down  
control.  
and rotate the scroll  
Setting Up Your Scanner  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Basic Operation  
Turning On the Scanner and  
Setting the Squelch  
Scroll  
Control  
Note: Make sure the scanner's antenna is connected  
before you turn it on.  
1. Press and hold  
the scanner.  
for about 2 seconds to turn on  
2. Briefly press the scroll control  
once. VOLUME LEVEL and a  
number appear on the display.  
3. While VOLUME LEVEL appears, rotate the scroll  
control to set the volume to a comfortable listening  
level.  
Note: If you do not press any key or turn the scroll  
control within about 10 seconds, VOLUME LEVEL  
disappears. If this happens, simply press the  
scroll control again.  
Func  
4. While holding down  
on the left side of the  
scanner, briefly press the scroll control once.  
SQUELCH LEVEL and a number appear on the  
display.  
5. While SQUELCH LEVEL appears, rotate the scroll  
control to set the squelch to the level you want.  
Note: If you do not press any key or turn the scroll  
control within about 10 seconds, SQUELCH  
LEVEL disappears. If this happens, hold down  
Func  
and the scroll control again.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Scanning Systems  
To begin scanning programmed systems, press Scan.  
The BR330T scans all unlocked systems in all  
activated quick-key groups and any searches  
unlocked for search and scan.  
Notes:  
• If no systems are programmed, or all systems are  
locked out, an error message appears. Program a  
system or select a system to scan.  
• When scanning multiple systems, the BR330T  
scans systems according to the assigned quick  
key. Systems assigned to quick key 1 are scanned  
first, then 2, 3, 4, etc. Systems not assigned to a  
quick key are scanned last, then unlocked  
searches. Within a quick key, systems are  
scanned in the order they were assigned.  
• Within a system, channels are scanned according  
to the assigned channel group, with the same  
priority as described above for systems.  
• The BR330T scans a system for the duration you  
set using the System Hold Time option (see “Set-  
ting the System Hold Time” on Page 82). For  
trunked systems, the scanner moves to the next  
system after the hold time expires, the current  
transmission ends, and the channel delay expires.  
Conventional systems operate similarly, but all  
unlocked channels are scanned at least one time  
regardless of the hold time setting.  
• Each search range is searched for the amount of  
time you set using the “Set Hold Time” option. See  
“Setting the System Hold Time” on Page 82 for  
more information.  
Preprogrammed System Tips  
All systems preprogrammed into the scanner are  
assigned to a Quick Key. See “Preprogrammed Sys-  
tems” on Page 148 for a list of preprogrammed  
systems and their Quick Key assignments.  
Basic Operation  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
• The systems preprogrammed into the scanner are  
located primarily in major metropolitan areas.  
You might hear transmissions on frequencies  
assigned to very distant stations. This will happen  
if a local system also uses the same frequency.  
You can scan the preprogrammed systems more  
efficiently by preventing the BR330T from trying to  
scan systems that are not in your area. To do this,  
refer to the quick key assignments listed in  
“Preprogrammed Systems” on Page 148, and enter  
the quick key for each distant system to turn them off.  
To stop scanning a local preprogrammed system, you  
can:  
• Lock out the system (see “Locking/Unlocking Sys-  
tems” on Page 45)  
• Reassign the system to another quick key so you  
can easily enable/disable it independently of other  
systems (see “Editing the System Quick Key” on  
Page 81)  
• Delete the system (see “Deleting Systems” on  
Page 88)  
Important! You cannot restore preprogrammed  
systems if you delete them.  
Selecting Systems to Scan  
To select systems to scan, press Scan then press the  
quick key assigned to the system or systems you want  
to scan. For quick keys 0-9, press the quick key’s  
number. For quick keys 10-99, press then press the  
quick key’s 2-digit number. To stop scanning the  
system(s), press (if the quick key is a 2-digit quick  
key) then the number button or buttons again.  
The Sx: (system) indicators on the display show the  
systems that are currently selected.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select or lock out a system that is not assigned to a  
Func  
key, press and hold  
while you rotate the scroll  
control until the desired system is selected. Then,  
Func  
continue to hold  
and press L/O to either lock out  
or unlock the system.  
Selecting System Channel Groups  
Within a system, you can assign groups of channels to  
a group quick key (see “Setting the Group Quick Key”  
on Page 90).  
Follow these steps to activate or deactivate a channel  
group within a system while scanning.  
Func  
1. Press  
to hold on the system (or hold down  
Func  
then rotate the scroll control to select the  
system).  
Func  
2. Continue to hold  
and press the number key  
corresponding to the channel group you want to  
activate or deactivate.  
Locking/Unlocking Systems  
Follow these steps to lock out a system so that it does  
not scan even if its quick key is selected.  
Func  
1. While holding down  
to select the system.  
, rotate the scroll control  
Func  
2. Continue to hold down  
and press L/O to lock  
out the system. System Lockedappears.  
3. Repeat Steps 1 and 2 to unlock a system you  
have previously locked. System Unlocked  
appears.  
Locking/Unlocking Channels  
Follow these steps to lock out a channel so that it does  
not scan even if its system and channel group are  
selected.  
Func  
1. While holding down  
, rotate the scroll control  
to select the system where the channel is stored.  
Basic Operation  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Func  
2. Release  
then press Hold within 2 seconds  
to hold on the system.  
3. Rotate the scroll control to select the channel you  
want to lock or unlock.  
4. Press L/O to lock or unlock the channel.  
You can also lock out an active channel by pressing  
L/O while the scanner is stopped on the channel.  
ID Scan/ID Search Mode  
While you are scanning a trunked system, the scanner  
can be in either ID Scan or ID Search mode:  
• ID Scan – the scanner only stops on talk group  
ID’s that you have programmed into the system  
• ID Search – the scanner stops on any unlocked  
talk group that becomes active.  
Func  
To toggle between ID Scan and ID Search, press  
then press Scan within 2 seconds while the scanner is  
scanning the system.  
If the scanner does not scan the system long enough  
Func  
for you to easily do this, press  
is scanning the system (or press  
while the scanner  
Func  
then rotate the  
scroll control to select the system). Then, release  
Func  
and press Scan within 2 seconds.  
Temporarily Holding On a System  
Func  
To temporarily hold on a system, press and hold  
To hold on a different system, continue to hold  
.
Func  
and rotate the scroll control to select the system.  
Normal scanning resumes 2 seconds after you release  
Func  
.
Holding On a Channel  
To hold on a channel, press Hold while the channel is  
active. To select a different channel, rotate the scroll  
control. If you scroll past the beginning or end of the  
current system, the scanner selects channels in the  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
previous or next system. To resume scanning, press  
Scan.  
Quickly Storing an ID During ID  
Search  
To quickly store an active talk group ID during ID  
search, press E. You see:  
Quick TGID Save?  
To save the ID into a channel, press E. Otherwise,  
press . If you press E, the scanner stores the ID into  
a channel group called Qck Save Grpin the  
current system.  
Quick-Storing Channels or  
Talk Group ID’s  
1. Hold on an existing channel in any system.  
2. Enter the frequency or talk group ID you want to  
store (press twice to enter hyphens in talk group  
ID’s).  
3. To quick-store the channel or talk group ID, press  
E. Otherwise, press  
.
If you enter a frequency then press E, the scanner  
stores it in the Qck Save Grpgroup in a system  
called Qck Save Cnv Sys. These are created if they  
do not exist. Then, the scanner prompts you to save  
other channel settings.  
If you enter a talk group ID then press E, the scanner  
stores it into a channel group named Qck Save Grp  
in the current system. If the talk group ID’s format is  
not the type used by the current system, the scanner  
displays an error message and does not save the talk  
group ID.  
If you pressed No in Step 3, the scanner prompts you  
to select the system and the group where you want to  
store the frequency or talk group ID.  
Basic Operation  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quickly Recalling Channels  
1. Press Hold to hold on any channel.  
Func  
2. Press  
+ rcl. The scanner prompts you to  
select the system where the channel is stored.  
3. Rotate the scroll control to select the system, then  
press E. The scanner prompts you to select the  
channel group where the channel is stored.  
4. Rotate the scroll control to select the group, then  
press E. The scanner prompts you to select a  
channel.  
5. Rotate the scroll control to select the channel,  
then press E to hold on that channel.  
Monitoring Trunking Activity  
To monitor trunking activity, press Hold then turn the  
scroll control to select the control channel frequency  
(for a Motorola or EDACS system) or any system  
frequency (for an LTR system). Active talk group ID’s  
appear on the second line of the display. For Motorola  
systems, the scanner will show the System ID on the  
top line of the display. For EDACS systems, the  
scanner will show the site ID on the top line of the  
display. Trunking indicators appear on the display.  
Toggling Channel Alpha Tags  
To change the display so the channel and frequency or  
Talk Group ID appear instead of the alpha tag, press  
Func  
+ 5.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menu  
The scanner’s menu lets you select options that let you  
Using the Menu  
set up and use the scanner.  
Menu  
To use the menu, press  
on the left side of the  
scanner. To select a menu item, rotate the scroll control  
clockwise or counterclockwise. The currently-selected  
menu item is highlighted with a bar on the display. When  
the menu item you want to select is highlighted, briefly  
press the scroll control to select it. To back up a level,  
Menu  
Menu  
press  
. To exit the menu mode, press  
again or  
the L/O key.  
This table shows the scanner’s menu structure. To find  
information about a particular menu setting in this  
manual, go to the page number shown in parentheses  
next to the setting.  
Note: Not all of the options shown in this table may  
appear at the same time. To view all available options on  
any screen, rotate the scroll control.  
Menu Item  
Submenu  
(51)  
Select System  
-- M E N U --  
Program System  
Srch/CloCall Opt  
Search for ...  
Alameda Conv  
Alameda MOT  
Arlington MOT  
Srch/CloCall Opt  
Freq Lockouts  
Broadcast Screen  
-- M E N U --  
Program System  
Srch/CloCall Opt  
Search for ...  
(111)  
(112)  
(100)  
(113)  
(114)  
(115)  
(95) (114)  
(114)  
(115)  
(116)  
CTCSS/DCS Search  
Srch/CloCall Opt  
Repeater Find  
Max Auto Store  
Set Delay Time  
Set Modulation  
Set Attenuator  
Set Data Skip  
Set Step  
Search for ...  
Service Search  
Edit Service  
-- M E N U --  
Program System  
Srch/CloCall Opt  
(99)  
(103)  
(101)  
Custom Search  
Srch/CloCall Opt  
Search for ...  
Edit Custom  
(102)  
(105)  
Search and Store  
Using the Menu  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Item  
Submenu  
Close Call  
-- M E N U --  
Srch/CloCall Opt  
Search for ...  
(108)  
(108)  
(108)  
(108)  
(108)  
Close Call Only  
CC Auto Store  
Set CC Mode  
Set CC Override  
Set CC Alert  
Set CC Bands  
Close Call  
(108)  
Set Priority  
Off  
On  
(54)  
(54)  
(54)  
(54)  
-- M E N U --  
Search for ...  
Close Call  
Plus On  
Srch/CloCall Opt  
Set Priority  
WX Operation  
Weather Scan  
Weather Alert  
-- M E N U --  
Close Call  
(117)  
(117)  
(118)  
(115)  
(114)  
(119)  
Set Priority  
Program SAME  
Srch/CloCall Opt  
WX Operation  
Set Delay Time  
Set Attenuator  
WX Alt Priority  
Tone-Out for ...  
Tone-Out Standby  
Tone-Out Setup  
-- M E N U --  
Set Priority  
WX Operation  
(120)  
(120)  
Tone-Out for ...  
Xfer Information  
Wired Clone  
On-Air Clone  
-- M E N U --  
WX Operation  
Tone-Out for ...  
(57)  
(58)  
Xfer Information  
Settings  
Set Backlight  
Adjust Key Beep  
-- M E N U --  
(54)  
(53)  
(54)  
(55)  
(56)  
(55)  
(56)  
(53)  
Tone-Out for ...  
Xfer Information  
Set Battery Save  
Srch/CloCall Opt  
Settings  
Set Audio AGC  
Adjust Contrast  
Set Bar Antenna  
PC Control  
See Scanner Info  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Systems Menu  
This table shows the scanner’s systems menu  
structure. This menu lets you program new systems or  
change existing systems. To find information about a  
particular menu setting in this manual, go to the page  
number shown under or next to the setting.  
Menu  
To use the systems menu, press  
then briefly  
press the scroll control. To back up a level, press  
Menu  
Menu  
. To exit the menu mode, press  
again.  
Note: Not all of the options shown in this table may  
appear at the same time. To view all available options  
on any screen, rotate the scroll control  
Menu/Submenu Option Menu  
Select Sys Type  
System 1  
R
Racing  
Edit Name  
(64)  
(81)  
(64)  
(88)  
(89)  
Edit Sys Option  
Edit Car  
Conventional  
MOT  
Srch/CloCall Op  
Srch/CloCall Opt  
Delete System  
EDCS  
LT  
Copy System  
“Manually Programming Racing  
Systems” on Page 63  
Select Sys Type  
System 1  
C
Racing  
Edit Name  
(80)  
(81)  
(67)  
(88)  
(89)  
Edit Sys Option  
Edit Group  
Conventional  
MOT  
Srch/CloCall Op  
Srch/CloCall Opt  
Delete System  
EDCS  
LT  
Copy System  
“Programming Conventional  
Systems” on Page 67  
Select Sys Type  
System 1  
M
(80)  
(81)  
(77)  
(71)  
(88)  
(72)  
(88)  
(88)  
Conventional  
MOT  
Edit Name  
Edit Sys Option  
Set Frequencies  
EDCS  
Srch/CloCall Opt  
Srch/CloCall Opt  
Set Modulation  
LT  
Set Attenuator  
Edit Group  
Delete System  
Copy System  
“Programming Motorola Systems”  
on Page 69  
System 1  
800MHz Standard  
800MHz Splinter  
Srch/CloCall Op  
900MHz band  
VHF Band  
UHF Band  
Using the Menu  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu/Submenu Option Menu  
Select Sys Type  
System 1  
E
Conventional  
MOT  
Edit Name  
(80)  
(81)  
Edit Sys Option  
Set Frequencies  
EDCS  
LT  
(77)  
(88)  
(72)  
(88)  
(88)  
Srch/CloCall Opt  
Set Attenuator  
Edit Group  
Delete System  
Copy System  
“Programming EDACS Systems”  
on Page 73  
EDCS  
WIDE  
NARROW  
SCAT  
Srch/CloCall Opt  
Select Sys Type  
System 1  
L
(80)  
(81)  
(77)  
(71)  
(88)  
(78)  
(88)  
(88)  
Conventional  
MOT  
Edit Name  
Edit Sys Option  
Set Frequencies  
EDCS  
Srch/CloCall Op  
Srch/CloCall Opt  
Set Modulation  
LT  
Set Attenuator  
Edit Group  
Delete System  
Copy System  
“Programming LTR Systems” on  
Page 76  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Settings  
Other Settings  
Displaying System Information  
Viewing Memory Used  
Menu  
ꢂꢀSettingsꢁ  
See Scanner Info ꢀ  
% Memory Used ꢁ  
A bar showing the percent of memory used appears.  
Press any key to return to the previous menu, then  
press Scan or Hold.  
Viewing the Firmware Version  
Menu  
ꢂꢀSettingsꢁ  
See Scanner Info ꢀ  
Firmware Version ꢁ  
Press any key to return to the previous menu, then  
press Scan or Hold.  
Adjusting the Key Beep  
Menu  
ꢂꢀSettingsꢁ  
Adjust Key Beep ꢀ  
Auto- the scanner automatically sets the key beep to  
match the master volume setting level you select.  
Level 1- 15 the scanner lets you select a key beep  
level. You can choose any of 15 different key beep  
levels.  
Off- the scanner turns the key beep off.  
Locking/Unlocking the Keypad and  
Scroll  
Func  
Press and hold down  
then press  
/
/
to  
lock or unlock the keypad. Keypad Lockand On  
(if the keypad is locked) or Off (if the keypad is  
unlocked) appears. This does not affect the volume  
setting. The scroll control still controls the volume  
when you lock the controls.  
Other Settings  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning Power Save On or Off  
Menu  
ꢂꢀSettingsꢁ  
Set Battery Save ꢀ  
OnThe scanner goes into low-power mode when you  
monitor a conventional channel that has no activity.  
OffPower save is off.  
Priority Scan  
Menu  
ꢂꢀSet Priorityꢁ  
Func  
Or, while holding on any channel, press  
to select one of these priority modes:  
+ 1/pri  
OffNormal scanning  
OnWhile scanning a conventional system, the  
scanner interrupts every 2 seconds and checks  
the priority channels in each unlocked conventional  
system. Priority channels in lower priority key  
numbered systems (starting from 1) have highest  
priority. PRIappears when you select this mode.  
Plus On The scanner only scans priority  
channels in unlocked conventional systems.  
PRIflashes when you select this mode.  
Other Settings  
Using the Backlight  
Menu  
ꢂꢀSettingsꢁ  
Set Backlight ꢀ  
10 sec The backlight stays on for 10 seconds  
after you press  
30 sec The backlight stays on for 30 seconds  
after you press  
.
.
Squelch The backlight turns on when the  
squelch opens then stays on for 5 seconds.  
Keypress The backlight turns on when any key  
is pressed then stays on for 10 seconds.  
Infinite The backlight turns on when you  
press  
then stays on until you press  
again.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pressing any key while the backlight is on extends the  
backlight period. Pressing  
turns off the backlight.  
while the backlight is on  
Setting the Audio AGC  
Menu  
ꢂꢀSettingsSet Audio AGC ꢁ  
This setting helps balance the audio level you hear as  
you listen to different radio sources so you can hear  
them at a similar volume. Use this setting if you listen  
to an audio source that has natural changes in audio  
level for which you want to compensate.  
On Press the scroll control to select. Audio AGC is  
turned on.  
Off Press the scroll control to select. Audio AGC  
is turned off.  
Selecting the Bar Antenna  
Menu  
ꢂꢀSettingsSet Bar Antenna ꢁ  
This setting lets you switch between the internal bar  
antenna and the antenna connected to the SMA connector.  
Note: The bar antenna receives signals between 0.1  
and 1.7 MHz. It cannot receive signals out of this  
range even if you select it.  
On Press the scroll control to select.  
The bar antenna is selected.  
Off Press the scroll control to select.  
The antenna attached to the SMA connector is  
selected.  
Tuning The Bar Antenna  
Follow the steps under “Selecting the Bar Antenna” for  
best reception of AM radio signals.  
1. Make sure to select the Bar Antenna  
2. Tune to a frequency between 0.1 and 1.7 MHz.  
Func  
3. Hold down  
and tap the scroll control twice.  
Other Settings  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Using the scroll control, select a number between  
-8 and 7 seen in the lower right corner of the dis-  
play. Adjust the setting for the best reception.  
5. When set, tap scroll once to exit.  
Adjusting the Display Contrast  
Menu  
ꢂꢀSettingsꢁ  
Adjust Contrast ꢁ  
Contrast 1- 15 the scanner adjusts the display to  
the contrast level you select.  
This setting controls the display’s contrast (how light  
or dark it appears). Use this setting to change the  
contrast for different viewing conditions. There are 15  
contrast settings. You see the change in contrast as  
you scroll through the settings.  
Initializing the Scanner’s Memory  
1. Turn off the scanner.  
2. Press 2, 9, and Hold while turning on the scanner.  
Restore Preprogram List?  
Yes="E"/ No="." appears.  
3. Press ''E'' or ''.''  
Connecting Your Scanner to a  
Personal Computer  
To connect your scanner to a personal computer, you  
must first set the scanner’s baud rate (the rate at  
which data is transferred between the scanner and the  
computer, in bits per second (bps).  
Important! Before you start trans-  
ferring data between your scanner  
and your computer, make sure the  
batteries are fresh or fully charged.  
If the scanner loses power while  
you are transferring data, its  
memory might be corrupted and all  
information programmed in the scanner  
might be erased.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hint: If you have trouble transferring data between  
your scanner and your computer, try setting the baud  
rate to a slower setting.  
Use the included connection cable to connect your  
scanner to another BR330T scanner or your personal  
computer.  
Menu  
ꢂꢀSettingsꢁ  
PC Control ꢁ  
PC Control Lets you set the baud rate your scanner  
uses to communicate with a personal computer.  
Off The baud rate is not set.  
9600 bps The baud rate is set to 9600 bps.  
19200 bps The baud rate is set to 19,200 bps.  
38400 bps The baud rate is set to 38,400 bps.  
57600 bps The baud rate is set to 57,600 bps.  
115200 bps The baud rate is set to 115,200 bps.  
Using the Cloning Options  
Lets you set your scanner as a master (source) or  
slave (recipient), letting you transfer programming to  
or from another BR330T scanner. See “Wired Cloning”  
on Page 57 and “On-Air Cloning” on Page 58.  
Wired Cloning  
Menu  
ꢂꢀXfer Informationꢁ  
Wired Clone ꢁ  
MasterSets the scanner to be the source scanner.  
Slave Sets the scanner to be the recipient scanner.  
To clone (copy) data directly from one BR330T  
scanner to another BR330T scanner, you must first  
connect the scanners to each other using the included  
connection cables and a DB9 null modem adapter and  
DB9 gender changer (neither included), available at  
most computer stores. Then you must set one scanner  
as the source and the other as the destination.  
Plug the smaller end of each of the included connection  
cables into Remote on the right side of each scanner.  
Other Settings  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Then connect the other end of the cables together  
using the null modem connector and gender changer.  
Then set the scanner containing the programming you  
want to transfer as the master scanner, then set the  
other scanner as the slave scanner.  
(Master scanner) Clone Master Press SCAN Key  
Scan  
(Slave scanner) Clone Slave Press SCAN Key  
Scan  
Scan  
When you are ready to clone the scanner, press  
on the slave scanner first, then on the master scanner.  
The master scanner checks the connection between the  
two scanners, then transfers its data to the slave scanner.  
When the transfer is complete, Completeappears on  
both scanners. If the transfer did not work, Error  
appears on the master scanner.  
On-Air Cloning  
You can clone (copy) data from a PC to a BR330T  
scanner. This is useful if you want to quickly program  
20 or more BR330T scanners at the same time.  
Note: On-air cloning is practical if you are  
programming more than 10 scanners at the same  
time. Otherwise, we recommend you use wired  
programming.  
Menu  
ꢂꢀXfer Informationꢁ  
On-Air Clone ꢁ  
Start CloningStart on-air cloning.  
Set Frequency Lets you set the frequency where  
your scanner receives the cloning broadcast.  
Set ModulationLets you set the cloning  
broadcast’s modulation type.  
To clone (copy) data from a PC to the scanner, you  
need a transceiver, a PC that has an audio input, and  
a cable to connect your PC’s sound card to the  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
transceiver. Follow the directions supplied with the  
Uniden Advanced Scanner Director Software (avail-  
able online at http://www.uniden.com) to construct a  
cable and use on-air cloning.  
When you are receiving the cloning broadcast and are  
ready to clone the scanner, select Start Cloning  
on the scanner. The scanner receives the data from  
the transmission  
When the transfer is complete, Completeappears. If  
the transfer did not work, Errorappears.  
Other Settings  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Radio Systems  
Your BR330T comes preprogrammed with 76 analog  
Programming Radio Systems  
systems from the most populous areas in the US.  
However, to get the most enjoyment from your scan-  
ner (especially if you do not live near one of these  
counties), you must customize the programming for  
your area.  
To edit an existing system, use the menu to navigate  
to the system setting you want to change. This section  
assumes you are programming a new system.  
Programming radio systems is completed in two major  
steps. Don't skip either step!  
1. Plan the system.  
2. Program the system into your scanner according  
to the plan you prepared in Step 1.  
To make planning easier, planning worksheets are  
included in the back of this manual for each system  
type. Copy the worksheets (or download this manual  
from the Uniden America Corporation website and  
print extra sheets), then use them to plan out how you  
will program the scanner.  
Important! Before you start programming your  
scanner, make sure the batteries are fresh or fully  
charged. If the scanner loses power while you  
program it, its memory might be corrupted which will  
require you to reinitialize it (see “Initializing the Scan-  
ner’s Memory” on Page 56). All information  
programmed in the scanner, including  
preprogrammed systems, might be lost.  
General Notes  
• You can store up to 400 systems.  
• Trunking systems can have up to 200 channels  
each. The number of conventional system  
channels you can have is limited only by the  
amount of scanner memory remaining.  
• You can store up to 20 channel groups per system.  
Total channels are limited to 2,500.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quickly Programming Racing  
Systems  
You can use the menu system to program a racing  
system (see “Manually Programming Racing Systems”  
on Page 63). Or you can follow the onscreen prompts  
as described in this section to quickly program your  
scanner. These prompts are designed to help you  
quickly enter a new race from a frequency list  
purchased at the track (if the system is not already  
preprogrammed into your scanner). When you  
complete Steps 5 and 6, almost all cars will use the  
default settings for the other steps.  
1. While scanning,  
Select race  
press 0. Then rotate  
New race  
the scroll control to  
select New race,  
then press E.  
2. Enter the name of  
the race, then press  
E.  
Name the race  
_
3. Enter the first car  
number (up to 3  
Enter Car No  
_
digits), then press E.  
4. Enter the first driver  
name (up to 12  
characters), then  
press E.  
Enter Driver  
_
5. Enter the driver’s  
frequency, then  
press E.  
Enter Frequency  
_
Programming Radio Systems  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Set the CTCSS/  
DCS code, then  
press E  
Set CTCSS/DCS  
Off  
7. Press E to enter  
advanced options  
(Steps 8-11) or  
Advanced Options  
Yes=“E”/ No=“.”  
press  
to skip to  
Step 12.  
8. Set the modulation  
type (Autois  
Set Modulation  
Auto  
almost always the  
correct choice),  
then press E  
9. Set the attenuator  
(turn it on to  
Set Attenuator  
Off  
eliminate  
interference from  
other sources), then press E  
10. Set the channel  
Set Priority  
Off  
priority (turn it on if  
you want the  
scanner to interrupt  
operation every few  
seconds to check  
for transmissions by  
this driver), then press E  
11. Set alert (turn it on if  
Set Alert  
Off  
you want the  
scanner to sound a  
special alert when  
this car transmits),  
then press E  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. If you have another  
frequency to enter  
for this driver, press  
E then repeat from  
Step 5. Otherwise,  
press No  
Another Freq for  
This Driver?  
Yes=“E”/ No=“.”  
13. To enter another car  
in this race, press E  
then repeat from  
Step 3. Otherwise,  
press No  
Another Car For  
This race?  
Yes=“E”/ No=“.”  
14. When you finish,  
press Scan to begin  
scanning the race  
Complete  
Press SCAN Key  
Manually Programming Racing  
Systems  
Menu  
Program Systemꢁ  
New System Racingꢁ  
Confirm?E  
The scanner creates an empty conventional system,  
with a default name of System NN  
R.  
NN increments as you add new systems. Rindicates  
that this is a racing system.  
Refer to the appropriate section to set system-wide  
options:  
• See “Editing the System Name” on Page 80  
• See “Setting System Lockout” on Page 81  
• See “Setting the System Hold Time” on Page 82  
• See “Setting the Channel Delay Time” on Page 82  
• See “Setting Data Skip” on Page 115  
• See “Deleting Systems” on Page 88  
• See “Copying Systems” on Page 89  
Programming Radio Systems  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing the Car  
Menu  
Program Systemꢁ  
Select the system ꢁ  
Edit Carꢁ  
Select the car ꢁ  
Follow these steps to enter the car options.  
1. Press 0-9 to enter the car’s number (up to 3  
digits), then press the scroll control.  
2. Rotate the scroll control to select one of the  
following options. Then refer to the appropriate  
section to set or change a car setting.  
• See “Entering/Editing a Car Number” on Page 64.  
• See “Editing a Driver” on Page 65.  
• See “Setting a Car’s Quick Key” on Page 65.  
• See “Editing a Car’s Channel” on Page 66.  
• See “Deleting a Car” on Page 66.  
• See “Setting Lockout On A Car” on Page 66.  
Entering/Editing a Car Number  
Menu  
Program Systemꢁ  
Select the system ꢁ  
Edit Carꢁ  
Select the car ꢁ  
Edit Car No ꢁ  
1. Rotate the scroll control to select the first digit,  
then press 0-9 to enter the correct digit.  
2. Repeat Step 1 to enter or correct the second and  
third digits if necessary, Then press E or press  
down on the scroll control to accept the setting.  
Hints:  
• Each car number can be up to three digits.  
• Press to delete the entire car number.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing a Driver  
Menu  
Program Systemꢁ  
Select the system ꢁ  
Edit Carꢁ  
Select the car ꢁ  
Edit Driver ꢁ  
1. Rotate the scroll control to select the first letter.  
Func  
2. Press and hold down  
then rotate the scroll  
control once to select the next letter.  
3. Repeat Steps 1 and 2 until you have entered the  
driver’s name. Then press E or press down on the  
scroll control to accept the setting.  
Hints:  
• Each driver’s name can be up to 12 characters.  
Abbreviate as necessary to fit.  
• Press twice to delete the current character.  
• Press three times to clear the entire driver  
name.  
Setting a Car’s Quick Key  
Menu  
Program Systemꢁ  
Select the system ꢁ  
Edit Carꢁ  
Select the car ꢁ  
Set Quick Key ꢁ  
After selecting this option, press 0-9 or rotate the scroll  
control to assign the car to a quick key or press No to  
assign the car to no quick key, then press E.  
Hints:  
• You can assign as many cars to the same quick  
key as you want.  
• Preprogrammed conventional systems are set to  
quick key 9.  
To be scanned, a car’s quick key must be  
activated and the system must be unlocked.  
Programming Radio Systems  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing a Car’s Channel  
Menu  
Program Systemꢁ  
Select the system ꢁ  
Edit Carꢁ  
Select the car ꢁ  
Edit Channel ꢁ  
Deleting a Car  
Menu  
Program Systemꢁ  
Select the system ꢁ  
Edit Carꢁ  
Select the car ꢁ  
Delete Car ꢁ  
The scanner prompts you to confirm deletion.  
To confirm, press E. To cancel, press No.  
Note: Deleted cars cannot be restored. You must  
re-enter them.  
Setting Lockout On A Car  
Menu  
Program Systemꢁ  
Select the system ꢁ  
Edit Carꢁ  
Select the car ꢁ  
Set Lockout ꢁ  
This setting determines whether the scanner will scan  
this car when it is enabled. Select your setting, then  
press E.  
Lockout- the car is not scanned.  
Unlocked- the car is scanned.  
Note: The default setting is Unlocked.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Conventional  
Systems  
Menu  
Program Systemꢁ  
New System ꢁ  
Conventional ꢁ  
Confirm? Yes=“E”/ No=“.”  
The scanner creates an empty conventional system,  
with a default name of System n  
C.  
nis a number that increments as you add new  
systems. Cindicates that this is a conventional system.  
Refer to the appropriate section to set system-wide  
options:  
• See “Editing the System Name” on Page 80  
• See “Editing the System Quick Key” on Page 81  
• See “Setting System Lockout” on Page 81  
• See “Setting the System Hold Time” on Page 82  
• See “Setting the Channel Delay Time” on Page 82  
• See “Deleting Systems” on Page 88  
• See “Copying Systems” on Page 89  
• See “Entering/Editing Conventional Channel  
Groups” on Page 67  
Entering/Editing Conventional  
Channel Groups  
To enter channels in a conventional system, first set up  
a channel group (or groups) to hold the channels. Then,  
enter the channel and channel parameters in the group(s).  
Setting Up a Channel Group  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Group ꢁ  
New Group ꢁ  
Programming Radio Systems  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The scanner creates a group with a default name of  
Group n. nincrements by one for each new group  
you create within a system. Refer to the appropriate  
section to set group-wide options:  
• See “Entering/Editing the Group Name” on  
Page 89  
• See “Setting the Group Quick Key” on Page 90  
• See “Deleting Groups” on Page 91  
• See “Setting System Lockout” on Page 81  
• See “Entering/Editing Conventional Channels” on  
Page 68  
Entering/Editing Conventional  
Channels  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
New Channelꢂ ꢁ  
Refer to the appropriate section to change a channel  
setting:  
• See “Editing the Channel Name” on Page 91  
• See “Editing Frequencies (Conventional Channels  
Only)” on Page 92  
• See “Setting Channel Priority (Conventional  
Channels Only)” on Page 92  
• See “Deleting Channels” on Page 97  
• See “Copying/Pasting Channels” on Page 97  
Note: The scanner automatically sets the step to  
match the input frequency.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Motorola Systems  
Menu  
Program Systemꢁ  
New System ꢁ  
MOT ꢁ  
Next, rotate the scroll control to select the type of  
Motorola system you want to program, then briefly  
press the scroll control to select it.  
800MHz Standard- Use for 800 MHz systems  
that use the standard band plan  
800MHz Splinter- Use for 800 MHz systems  
that use the splinter band plan (typically near  
international borders)  
Note: Splinter systems have frequencies below  
866 MHz that end in 0. For example, 851.0250  
would be the frequency of a splinter system.  
900MHz Band- Use for 900 MHz systems  
VHF band - Use for VHF systems  
UHF band- Use for UHF systems  
Confirm? Yes=“E”/ No=“.”  
Next, refer to the appropriate section to set system-  
wide options. For most settings, you can accept the  
default. However, for the items in bold, you must enter  
information in order for your scanner to scan the  
system.  
• See “Editing the System Name” on Page 80  
• See “Editing the System Quick Key” on Page 81  
• See “Setting System Lockout” on Page 81  
• See “Setting the System Hold Time” on Page 82  
• See “Setting the Channel Delay Time” on Page 82  
• See “Setting ID Scan/Search (Trunked Systems  
Only)” on Page 83  
• See “Editing the Fleet Map (Motorola Systems  
Only)” on Page 83 (must be set up for Type I and  
Type II Hybrid systems)  
• See“Setting the Motorola Status Bit (Motorola Sys-  
tems Only)” on Page 84  
Programming Radio Systems  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• See “Setting the End Code Operation (Motorola  
Systems Only)” on Page 85  
• See “Setting I-Call (Motorola and EDACS Sys-  
tems Only)” on Page 85  
• See “Setting Emergency Alert (Motorola and  
EDACS Systems Only)” on Page 86  
• See “Setting Control-Channel Only (Motorola Sys-  
tems Only)” on Page 86  
• See “Setting System Lockout” on Page 81  
• See “Reviewing Locked Out Frequencies” on  
Page 111  
• See “Setting System Attenuation (Trunked Sys-  
tems Only)” on Page 88  
• See “Deleting Systems” on Page 88  
• See “Copying Systems” on Page 89  
• See “Setting System Frequencies” on Page 70  
• See “Entering/Editing Motorola Channel Groups”  
on Page 72  
Setting System Frequencies  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Set Frequencies ꢁ  
Input a system frequency, then press the scroll control.  
Menu  
To enter additional frequencies, press  
, use the  
scroll control to select New Frequency, then repeat  
the above.  
Note: If you select Control Channel Only mode (see  
“Setting Control-Channel Only (Motorola Systems  
Only)” on Page 86), you only need to enter the  
frequency(s) that can be assigned as the control  
channel. Most frequency lists usually indicate which of  
the frequencies are the control channel frequencies.  
Otherwise, you must enter all of the frequencies.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Modulation  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Set Modulation ꢁ  
Auto - the scanner uses the default modulation for  
the frequency band.  
FM- the scanner uses FM (frequency modulation) for  
the frequency band.  
NFM - the scanner uses narrowband FM for the  
frequency band.  
Note: The default setting is Auto.  
This setting controls the modulation method used for  
the frequency band. In most cases, if you leave this  
set to Auto, the scanner automatically selects the  
correct modulation type for the system you are  
programming.  
Setting Attenuation  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Set Attenuator ꢁ  
This setting controls whether the attenuator will be on  
or off for the current system. Select your setting then  
press the scroll control.  
Off- the attenuator is off.  
On- system frequencies are attenuated by about 18  
dB.  
Notes:  
• Even if ATTappears, attenuation might not work if  
the bar antenna is turned on and the tuned  
frequency is from 0.1 to 1.7 MHz.  
• Turn on this setting if you are near strong signal  
sources. Attenuation can help reduce interference  
and desensitization that strong signals create.  
Programming Radio Systems  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• You can also turn this setting on or off by holding  
Func  
on a trunked system, then pressing  
+ E.  
Entering/Editing Motorola Channel  
Groups  
To enter channels in a system, first set up a channel  
group (or groups) to hold the channels. Then, enter  
the channel and channel parameters in the group(s).  
Setting Up a Channel Group  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Group ꢁ  
The scanner creates a group with a default name of  
Group nn. nnincrements by one for each new group  
you create within a system.  
Next, refer to the appropriate section to set group-wide  
options:  
• See “Entering/Editing the Group Name” on  
Page 89  
• See “Setting the Group Quick Key” on Page 90  
• See “Deleting Groups” on Page 91  
• See “Copying Systems” on Page 89  
• See “Entering/Editing Motorola Channels” on  
Page 72  
• See “Setting I-Call (Motorola and EDACS Sys-  
tems Only)” on Page 85  
Entering/Editing Motorola Channels  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
New Channelꢂ ꢁ  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enter a talk group ID ꢁ  
Note: You can enter I-Calls by pressing then the  
I-Call number. You can enter the I-Call wild card by  
pressing then 0.  
Refer to the appropriate section to change a  
channel setting:  
• See “Editing the Channel Name” on Page 91  
• See “Editing the Talk Group ID (Trunked Channels  
Only)” on Page 94  
• See “Setting Channel Lockout” on Page 96  
• See “Deleting Channels” on Page 97  
• See “Copying/Pasting Channels” on Page 97  
To program another channel within the same group,  
Menu  
press  
, then repeat the above. To create another  
Menu  
channel group and enter more channels, press  
three times, then proceed from “Entering/Editing  
Motorola Channel Groups” on Page 72.  
Programming EDACS Systems  
Menu  
Program Systemꢁ  
New System ꢁ  
EDCS ꢁ  
Confirm? Yes=“E”/ No=“.”  
Next, rotate the scroll control to select the type of  
EDACS system you want to program, then briefly  
press the scroll control to select it.  
WIDE- Use for wideband EDACS systems  
NARROW- Use for narrowband EDACS systems  
SCAT- Use for EDACS SCAT (Single Channel  
Autonomous Trunking)  
Confirm? Yes=“E”/ No=“.”  
Programming Radio Systems  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The scanner creates an empty EDACS system, with a  
default name of System n E.  
nis a number that increments as you add new  
systems. Eindicates that this is an EDACS system.  
Next, refer to the appropriate section to set system-  
wide options. For most settings, you can accept the  
default. However, for the items in bold, you must enter  
information in order for your scanner to scan the  
system.  
• See “Editing the System Name” on Page 80  
• See “Editing the System Quick Key” on Page 81  
• See “Setting System Lockout” on Page 81  
• See “Setting the System Hold Time” on Page 82  
• See “Setting the Channel Delay Time” on Page 82  
• See “Setting ID Scan/Search (Trunked Systems  
Only)” on Page 83  
• See “Setting I-Call (Motorola and EDACS Sys-  
tems Only)” on Page 85  
• See “Setting the EDACS ID Format (EDACS Sys-  
tems Only)” on Page 87  
• See “Reviewing Locked Out Frequencies” on  
Page 111  
• See “Setting Channel Attenuation (Conventional  
Channels Only)” on Page 96  
• See “Deleting Systems” on Page 88  
• See “Copying Systems” on Page 89  
• See “Setting System Frequencies” on Page 74  
• See “Entering/Editing EDACS Channel Groups”  
on Page 75  
Setting System Frequencies  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Set Frequencies ꢁ  
New Frequency ꢁ  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input a system frequency, then press the scroll control.  
The scanner then prompts you to enter the LCN for  
the entered frequency. Enter the LCN, then press the  
scroll control.  
Menu  
To enter additional frequencies, press  
, use the  
scroll control to select New Frequency, then repeat  
the above.  
Note: The scanner only accepts a single frequency  
and no LCN for SCAT systems.  
Entering/Editing EDACS Channel Groups  
To enter channels in a system, first set up a channel  
group (or groups) to hold the channels. Then, enter  
the channel and channel parameters in the group(s).  
Setting Up a Channel Group  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Group ꢁ  
The scanner creates a group with a default name of  
Group nn. nnincrements by one for each new group  
you create within a system.  
Next, refer to the appropriate section to set group-wide  
options:  
• See “Entering/Editing the Group Name” on  
Page 89  
• See “Setting the Group Quick Key” on Page 90  
• See “Deleting Groups” on Page 91  
• See “Editing the Channel Name” on Page 91  
• See “Setting Group Lockout” on Page 90  
Entering/Editing EDACS Channels  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Group ꢁ  
Programming Radio Systems  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
New Channelꢂ ꢁ  
Enter a talk group ID ꢁ  
Note: You can enter I-Calls by pressing then the  
I-Call number. You can enter the I-Call wild card by  
pressing then 0.  
Refer to the appropriate section to change a  
channel setting:  
• See “Editing the Channel Name” on Page 91  
• See “Setting Channel Lockout” on Page 96  
• See “Editing the Talk Group ID (Trunked Channels  
Only)” on Page 94  
• See “Deleting Channels” on Page 97  
• See “Copying/Pasting Channels” on Page 97  
To program another channel within the same group,  
Menu  
press  
, then repeat the above. To create another  
Menu  
channel group and enter more channels, press  
three times, then proceed from “Entering/Editing  
EDACS Channel Groups” on Page 75.  
Programming LTR Systems  
Menu  
Program Systemꢁ  
New System ꢁ  
LT ꢁ  
Confirm? Yes=“E”/ No=“.”  
The scanner creates an empty LTR system, with a  
default name of System n  
L.  
nis a number that increments as you add new  
systems. Lindicates that this is an LTR system.  
Next, refer to the appropriate section to set system-  
wide options. For most settings, you can accept the  
default. However, for the items in bold, you must enter  
information in order for your scanner to scan the  
system.  
• See “Editing the System Name” on Page 80  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• See “Setting the System Hold Time” on Page 82  
• See “Editing the System Quick Key” on Page 81  
• See “Setting the Channel Delay Time” on Page 82  
• See “Setting ID Scan/Search (Trunked Systems  
Only)” on Page 83  
• See “Reviewing Locked Out Frequencies” on  
Page 111  
• See “Setting Channel Attenuation (Conventional  
Channels Only)” on Page 96  
• See “Deleting Systems” on Page 88  
• See “Copying Systems” on Page 89  
• See “Setting System Frequencies” on Page 77  
See “Entering/Editing LTR Channel Groups” on  
Page 77  
Setting System Frequencies  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Set Frequencies ꢁ  
New Frequency ꢁ  
Input a system frequency, then press the scroll control.  
The scanner then prompts you to enter the LCN for  
the entered frequency. Enter the LCN, then press the  
scroll control.  
Menu  
To enter additional frequencies, press  
, use the  
scroll control to select New Frequency, then repeat  
the above.  
Entering/Editing LTR Channel Groups  
To enter channels in a system, first set up a channel  
group (or groups) to hold the channels. Then, enter  
the channel and channel parameters in the group(s).  
Programming Radio Systems  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Group ꢁ  
The scanner creates a group with a default name of  
Group nn. nnincrements by one for each new group  
you create within a system.  
Next, refer to the appropriate section to set group-wide  
options:  
• See “Entering/Editing the Group Name” on  
Page 89  
• See “Setting the Group Quick Key” on Page 90  
• See “Setting Group Lockout” on Page 90  
• See “Deleting Groups” on Page 91  
• See “Entering/Editing LTR Channels/ Talkgroups”  
on Page 78  
Entering/Editing LTR Channels/  
Talkgroups  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
New Channelꢂ ꢁ  
Enter a talk group ID ꢁ  
Refer to the appropriate section to change a  
channel setting:  
• See “Editing the Channel Name” on Page 91  
• See “Setting Channel Lockout” on Page 96  
• See “Editing the Talk Group ID (Trunked Channels  
Only)” on Page 94  
• See “Deleting Channels” on Page 97  
• See “Copying/Pasting Channels” on Page 97  
To program another channel within the same group,  
Menu  
press  
, then repeat the above.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To create another channel group and enter more  
Menu  
channels, press  
four times, then proceed from “g  
Program System g i Q Select the system g i Q Edit  
Group i” on Page 78.  
To direct-enter LTR talkgroups, follow the steps under  
“Quick-Storing Channels or Talk Group ID’s” on  
Page 47.  
Programming Radio Systems  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming/Editing Optional Settings  
TPtihnriosggssercatimonmdeitnaigls/tEhediintsintrugctOionpstfioorneaaclhSoef tth-e  
optional programming steps referred to in “Program-  
ming Radio Systems” on Page 60. Use the  
instructions in the appropriate section to enter or edit a  
setting.  
System-Level Settings  
These settings apply to the entire system.  
Editing the System Name  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Name ꢁ  
To enter a letter, turn the scroll control until the  
character you want appears. To enter a decimal point,  
press . To move the cursor to the left, press /4 or  
Func  
hold  
and rotate the scroll control to the left.  
Func  
To move the cursor to the right, press 6/ or hold  
and rotate the scroll control to the right.  
To clear a character, press twice. To clear all  
characters, press 3 times.  
To accept an entry, press E or press down on the scroll  
control.  
Hints:  
• Each system name can be up to 16 characters.  
Abbreviate as necessary to fit.  
• The default system names include the following  
letter in the 16th position to indicate the system  
type:  
M= Motorola  
E= EDACS  
L= LTR  
C= Conventional  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing the System Quick Key  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Set Quick Key ꢁ  
After selecting this option, select any number from  
1-99 to assign the system to a quick key or press to  
assign the system to no quick key, then press E.  
Hints:  
• Access single-digit system Quick Keys by  
pressing the single digit on the keypad during  
scanning. Access two-digit system Quick Keys by  
pressing then both digits.  
• You can assign as many systems to the same  
quick key as you want.  
To be scanned, a system’s quick key must be  
activated and the system must be unlocked.  
Setting System Lockout  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Set Lockout ꢁ  
This setting controls whether the system is scanned  
when its quick key is enabled. Rotate the scroll control  
to select your setting, then press E.  
Locked- the system is not scanned  
Unlocked- the system is scanned  
Note: You can also lock or unlock a system by holding  
Func  
and rotating the scroll control to select the  
Func  
system, then pressing  
+ L/O.  
Programming/Editing Optional Settings  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the System Hold Time  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Set Hold Time ꢁ  
This setting controls how many seconds the scanner  
scans a system before moving to the next unlocked  
system. Enter a value from 0-255, then press E to  
save the setting.  
Notes:  
• This setting is available only when a control  
channel exists in a trunked system.  
• If you select 0, the scanner stays on the system  
for a minimal time (only long enough to check  
current system activity).  
• The default setting is 2 seconds for each system.  
• For conventional systems, all unlocked channels  
will be scanned at least once regardless of this  
setting.  
• The scanner moves to the next system after the  
hold time expires, any current transmission ends,  
and the channel delay time expires.  
• Due to the control method for these system types,  
the scanner always scans LTR and EDACS SCAT  
systems for at least 1 second.  
Setting the Channel Delay Time  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Set Delay Time ꢁ  
This setting controls how many seconds the scanner  
waits after a transmission ends before resuming  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
scanning. Enter a value from 1-5or Off, then press E  
or the scroll control.  
Notes:  
• The default setting is 2 seconds for each system.  
• This setting applies to all channels within the  
system.  
Setting ID Scan/Search  
(Trunked Systems Only)  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
ID Scan/Search ꢁ  
This setting controls how the system will be scanned.  
Select your setting, then press E.  
ID Scan- the scanner only stops on channels you  
have programmed into the system.  
ID Search- the scanner stops on any transmission  
for unlocked talk group ID's.  
Note: You can also change this setting by pressing  
Scan while scanning the system.  
Editing the Fleet Map  
(Motorola Systems Only)  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Edit Fleet Map ꢁ  
For Motorola Type I and Type II Hybrid systems, you  
must enter a system fleet map in order for the scanner  
to properly track and display talk group ID's. The fleet  
map is usually included in the same resource that pro-  
vided system frequencies and talk group ID lists.  
Programming/Editing Optional Settings  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rotate the scroll control to select the fleet map:  
Preset- select from the 16 most common fleet maps  
(see “Preset Map 1 Preset Map 2” on Page 133).  
Press E to select.  
Custom- allows you to enter a custom fleet map.  
Enter the size code for each block. Press E to select.  
Notes:  
• If you don't know the fleet map for your Motorola  
Type I system, check the Internet. This information  
is commonly posted on sites such as those we  
reference in “Where To Get More Information” on  
Page 29.  
• The default setting of no fleet map is the correct  
setting for Motorola Type II systems.  
Setting the Motorola Status Bit  
(Motorola Systems Only)  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Set Status Bit ꢁ  
Motorola analog systems use talk group ID's in  
multiples of 16. ID numbers that fall between these  
ID's indicate special status flags for the system.  
This setting determines how the scanner will handle  
ID's that are not multiples of 16. Select your setting  
then press E.  
Ignore- the scanner rounds all received ID's down to  
the next interval of 16.  
Yes- the scanner treats all received ID's as unique  
ID's.  
Note: The default setting is Ignore.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the End Code Operation  
(Motorola Systems Only)  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Set End Code ꢁ  
This setting determines how the scanner handles the  
transmission end code sent by most Motorola  
systems. Select your setting then press E.  
Yes- the scanner immediately returns to the control  
channel when it detects the end code.  
Ignore- the scanner does not return to the control  
channel until the carrier drops.  
Note: The default setting is Yes.  
Setting I-Call  
(Motorola and EDACS Systems Only)  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Set I-Call ꢁ  
This setting determines how your scanner treats I-calls  
while ID Searching.  
On- the scanner tracks I-calls. Press E to select.  
Off- the scanner ignores I-calls. Press E to select.  
Only- the scanner only tracks I-calls and ignores  
other radio traffic on the system. Press E to select.  
Note: The default setting is Off.  
Programming/Editing Optional Settings  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Emergency Alert  
(Motorola and EDACS Systems Only)  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Emergency Alert ꢁ  
Off- the scanner does not alert you to emergency  
transmissions.  
Alert 1- 9 the scanner sounds an alert beep to  
notify you of the emergency transmission. You can  
choose any of 9 different beep types.  
Set Level  
Auto- the scanner automatically sets the emergency  
alert beep to the master volume level.  
Level 1- 15- the scanner adjusts the volume you  
hear to the level you select.  
Setting Control-Channel Only  
(Motorola Systems Only)  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Set C-Ch Only ꢁ  
This setting determines the frequencies you need to  
enter for Motorola systems. Select your setting, then  
press E.  
Off - you must enter all voice and control channel  
frequencies.  
On- you only need to enter control channel  
frequencies.  
Note: The scanner defaults to On.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reviewing Locked Out Frequencies  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Rvw ID: Srch L/O ꢁ  
The scanner displays the first locked-out frequency  
and prompts you to unlock the frequency. Press E to  
unlock the frequency. Or, rotate the scroll control or  
press to select a different frequency. To exit the  
Menu  
review, press  
.
Clearing All Locked-Out IDs  
Menu  
Program Systemꢁ  
Select the system ꢂ ꢁ  
Edit Sys Option ꢁ  
Clr All L/O IDs ꢁ  
The scanner prompts you to confirm deletion.  
To confirm and delete all locked-out IDs in the selected  
system, press E. Otherwise, to cancel, press  
.
Setting the EDACS ID Format  
(EDACS Systems Only)  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Sys Option ꢁ  
EDCS ID Format ꢁ  
EDACS talk group ID's are commonly provided in one of  
two formats: AFS and Decimal. This setting  
determines how you enter EDACS ID's and how the  
scanner displays them.  
AFS Format- the scanner uses AFS format for talk  
group ID's  
Decimal Format- the scanner uses decimal format  
for talkgroup ID's  
Programming/Editing Optional Settings  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
• The scanner defaults to AFS (agency, fleet,  
subfleet) format - the format used in most EDACS  
systems.  
• See “EDACS Trunking” on Page 27 for more  
information about the AFS format.  
Setting System Attenuation  
(Trunked Systems Only)  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Set Attenuator ꢁ  
This setting controls whether the attenuator will be on  
or off for the current system. Select your setting then  
press E.  
Off- the attenuator is off.  
On- system frequencies are attenuated by about 18 dB.  
Notes:  
• Even if ATTappears, attenuation might not work if  
the bar antenna is turned on and the tuned  
frequency is from 0.1 to 1.7 MHz.  
• Turn on this setting if you are near strong signal  
sources. Attenuation can help reduce interference  
and desensitization that strong signals create.  
• You can also turn this setting on or off by holding  
Func  
on a trunked system, then pressing  
+ E.  
Deleting Systems  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Delete System ꢁ  
The scanner prompts you to confirm deletion.  
To confirm, press E. To cancel, press  
.
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
• Deleted systems cannot be restored. You must  
re-enter them.  
• You cannot restore preloaded systems.  
Copying Systems  
To copy a system including all settings, groups, and  
channels:  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Copy System ꢁ  
New Sys Name?  
Enter a name for the copied system, then press E.  
Group-Level Settings  
The settings in this section apply to all of the channels  
stored in the current group.  
Entering/Editing the Group Name  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Name ꢂ ꢁ  
Follow these steps to enter/edit the group name.  
1. Rotate the scroll control to select the first letter.  
Func  
2. Press and hold down  
then rotate the scroll  
control once to select the next letter.  
3. Repeat Steps 1 and 2 until you have entered the  
system name. Then press E or press down on the  
scroll control to accept the setting.  
Hints:  
Programming/Editing Optional Settings  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Each group name can be up to 16 characters.  
Abbreviate as necessary to fit.  
• The group and system name alternate in the top  
line of the display when the scanner stops on a  
channel.  
• Press twice to delete the current character.  
• Press three times to clear the entire alpha tag.  
Setting the Group Quick Key  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Set Quick Key ꢂ ꢁ  
After selecting this option, press 0-9 to assign the  
group to a quick key or press to assign the system  
to no quick key, then press E.  
Hints:  
• You can assign as many groups to the same quick  
key as you want.  
• A group’s quick key must be activated to be scanned.  
Setting Group Lockout  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Set Lockout ꢂ ꢁ  
This setting determines whether the scanner scans  
this group when it is enabled. Select your setting, then  
press E.  
Lockout- the group is not scanned.  
Unlocked- the group is scanned.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: The default setting is Unlocked.  
Deleting Groups  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Delete Group ꢂ ꢁ  
The scanner prompts you to confirm deletion. To con-  
firm, press E. To cancel, press  
.
Note: Deleted groups cannot be restored. You must  
re-enter them.  
Channel-Level Settings  
These settings affect only the channel you are  
programming.  
Editing the Channel Name  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Edit Nameꢂ ꢁ  
Follow these steps to enter/edit the channel name.  
1. Rotate the scroll control to select the first letter.  
Func  
2. Press and hold down  
then rotate the scroll  
control once to select the next letter.  
3. Repeat Steps 1 and 2 until you have entered the  
channel name. Then press E or press down on the  
scroll control to accept the setting.  
Hints:  
Programming/Editing Optional Settings  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Each channel name can be up to 16 characters.  
Abbreviate as necessary to fit.  
• The channel name appears on the second line of  
the display when the scanner stops on a channel.  
• If you do not enter a channel name, the scanner  
displays the frequency (for conventional systems)  
or the talk group ID (for trunked systems) when it  
stops on a channel.  
• Press twice to delete the current character.  
• Press three times to clear the entire alpha tag.  
• Channel names take up extra memory. To maxi-  
mize channels, use channel names only where  
necessary.  
Editing Frequencies  
(Conventional Channels Only)  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Input Frequency  
Input the frequency, then press the scroll control.  
To change the frequency you entered, turn the scroll  
control to select Edit Frequency, then press the  
scroll control.  
Setting Channel Priority  
(Conventional Channels Only)  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Set Priorityꢂ ꢁ  
This setting controls whether the scanner treats the  
channel as a priority channel while scanning. Select  
your setting, then press E.  
On- when you turn on the Priority feature, the channel  
will be scanned every 2 seconds.  
appears.  
P
Off - the channel will not be treated with priority.  
Note: The default setting is Off.  
Setting Channel Alert  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Set Alertꢂ ꢁ  
Off- the scanner does not alert you to emergency  
transmissions.  
Alert 1- 9- the scanner sounds an alert beep to  
notify you of the emergency transmission. You can  
choose any of 9 different beep types.  
Set Level  
Auto- the scanner automatically sets the emergency  
alert beep to the master volume level.  
Level 1- 15- the scanner adjusts the volume you  
hear to the level you select.  
Programming/Editing Optional Settings  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing the Talk Group ID (Trunked  
Channels Only)  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the talk group ID ꢁ  
Edit TGID ꢂ ꢁ  
To edit the talk group ID, enter the talk group ID you  
want using the number keys on the keypad. Then  
press down on the scroll control to accept it.  
Setting CTCSS/DCS  
(Conventional Channels Only)  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Set CTCSS/DCSꢂ ꢁ  
This setting controls how a subaudible CTCSS or DCS  
is used for the channel. Select your setting, then press E.  
Off- any signal opens squelch.  
Search- the scanner searches for and displays any  
CTCSS or DCS tone that accompanies the transmis-  
sion.  
CTCSS- the scanner only opens squelch if the CTCSS  
tone you select is also present with the signal. The  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
scanner then prompts you to enter or scroll to the  
desired tone.  
DCS- the scanner only opens squelch if the DCS tone  
you select is also present with the signal. The scanner  
then prompts you to enter or scroll to the desired tone.  
Set Lockout - the scanner does not stop on the  
channel if the tone you select is present. The scanner  
prompts you to select a CTCSS or DCS tone.  
Notes:  
• The default setting is Off.  
• See “What is CTCSS/DCS?” on Page 20 for a  
complete list of CTCSS and DCS tones.  
Setting the System Frequency  
Modulation  
Menu  
ꢂꢀSrch/CloCall Optꢁ  
Set Modulation ꢁ  
Auto - the scanner uses the default modulation for  
the frequency band.  
AM- the scanner uses AM (amplitude modulation) for  
the frequency band.  
FM- the scanner uses FM (frequency modulation) for  
the frequency band.  
NFM - the scanner uses narrowband FM for the  
frequency band.  
WFM - the scanner uses wideband FM for the  
frequency band.  
Note: The default setting is Auto.  
This setting controls the modulation method used for  
the frequency band. In most cases, if you leave this  
set to Auto, the scanner automatically selects the  
Programming/Editing Optional Settings  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
correct modulation type for the system you are  
programming.  
Setting Channel Attenuation  
(Conventional Channels Only)  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Set Attenuatorꢂ ꢁ  
This setting controls whether the scanner attenuates  
signals on this channel. Select your setting, then press E.  
On- the channel is attenuated by about 18 dB.  
Off - the channel is not attenuated.  
Notes:  
• The default setting is Off.  
• For trunked systems, the attenuation is a system-  
level setting.  
• You can also toggle this setting by holding on the  
Func  
channel and pressing  
and E.  
Setting Channel Lockout  
Menu  
Program SystemE ꢀ  
Select the system E ꢀ  
Edit Group E ꢀ  
Select the group E ꢀ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Set Lockoutꢂ ꢁ  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This setting determines whether the scanner will scan  
this channel when its system and group are enabled.  
Select your setting, then press E.  
Lockout- the channel is not scanned.  
Unlocked- the channel is scanned.  
Notes:  
• The default setting is Unlocked.  
• You can also lock or unlock a channel by selecting  
it while scanning or holding, then pressing L/O.  
See “Basic Operation” on Page 42.  
Deleting Channels  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Delete Channelꢂ ꢁ  
The scanner prompts you to confirm deletion.  
To confirm, press E. To cancel, press  
.
Note: Deleted channels cannot be restored. You must  
re-enter them.  
Copying/Pasting Channels  
To copy a channel including all settings:  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Programming/Editing Optional Settings  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select the channel ꢁ  
Copy Channelꢂ ꢁ  
The scanner copies the channel into a copy buffer.  
To paste the channel into the same or another system:  
Menu  
Program Systemꢂ  
Select the system ꢁ  
Edit Group ꢁ  
Select the group ꢁ  
Edit Channel ꢂ ꢁ  
Select the channel ꢁ  
Paste Channelꢂ ꢁ  
Then, if necessary, edit the channel you copied to give  
it a unique name and other settings.  
Note: The paste option appears only if you have  
previously copied a channel from a system of the  
same type you are currently editing.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching and Storing  
Searching and Storing  
Service Search  
Service Search lets you quickly select and search the  
scanner’s preprogrammed search ranges. During  
service search, the scanner searches starting with the  
lowest frequency in the search range you select to the  
highest frequency in the range.  
Menu  
ꢂꢀSearch for ...ꢁ  
Service Search ꢁ  
Select the service search type ꢁ  
The following search bands appear.  
• Public Safety  
• News  
• HAM Radio  
• Marine  
• Railroad  
• Air  
• CB Radio  
• FRS/GMRS  
• Racing  
• TV Broadcast  
• AM Broadcast  
• FM Broadcast  
• Special  
The scanner searches the service you selected,  
stopping on any transmission it finds and displaying  
the frequency. Turn the scroll control to change the  
search direction. An arrow appears, showing the  
current search direction.  
To hold searching, press Hold. To resume searching,  
Func  
press  
then press Scan/srch. Or, press Hold.  
To lock out a frequency found while searching, press  
L/O. Locked Out appears and the scanner  
resumes service search.  
Searching and Storing  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
• If all frequencies in the search band you selected  
are locked out, All Locked! appears and the  
scanner does not search the band.  
• If the service you select uses channels (such as  
CB Radio or Marine), the scanner displays the  
service channel number.  
Quick Search  
Quick Search lets you search from the currently-tuned  
frequency if you are scanning a conventional system  
or sets the system to ID search if you are scanning a  
trunked system.  
If you are on a conventional system or channel, press  
Func  
and Scan/srch to start quick search. Quick  
Search? Yes = “E” / No = “.” appears.  
Qck Search Holdappears if you press Hold.  
Press E to start quick search or no to go to the search  
menu.  
CTCSS/DCS Search  
CTCSS/DCS Search lets you search for CTCSS or  
DCS tones when it finds an active frequency in search  
and Close Call modes. You can identify up to 50  
CTCSS tones and 104 DCS codes.  
Menu  
Srch/CloCall Optꢂꢁ  
CTCSS/DCS Search ꢀ  
Turning this option on lets the scanner search for  
CTCSS/DCS tones. If the scanner detects the tone, it  
displays the tone’s frequency and DCS code. Select  
your setting, then press the scroll control.  
On- CTCSS/DCS search is turned on.  
Off- CTCSS/DCS search is turned off.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Custom Search  
Custom Search lets you program and search 10  
custom search ranges. You can search any of these  
ranges simultaneously and select each custom search  
range you set. During custom search, the scanner  
searches starting with the lowest frequency in the  
search range you select to the highest frequency in  
the range.  
Notes:  
• Search ranges are preset. See “Editing a Custom  
Search Range” on Page 102 to change the range.  
• You cannot turn off all custom search ranges.  
Menu  
Search for ...ꢂ ꢁ  
Custom Search ꢁ  
The scanner starts custom search of the custom  
search range you selected, stopping on any  
transmission it finds and displaying the frequency.  
Turn the scroll control to change the search  
direction. An arrow appears, showing the current  
search direction.  
To turn search ranges on or off, press 0 and 1-9.  
To hold searching, press Hold. To resume searching,  
Func  
press  
then press Scan/srch or Hold again.  
To lock out a frequency found while searching, press  
L/O. Locked Out appears and the scanner  
resumes custom search.  
If you turn off the active custom search range, the  
scanner skips to the next custom search range and  
continues searching.  
Note: If all frequencies in all active custom search  
ranges are locked out, All Locked!appears and  
the scanner does not stop.  
Searching and Storing  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing a Custom Search Range  
You can edit up to 10 custom search ranges. The  
names of the custom search ranges appear on the  
display. The default custom search range names  
appear as Custom 1, Custom 2, and so on.  
Menu  
Search for ...ꢂ ꢁ  
Edit Custom ꢁ  
Select your setting, then press the scroll control.  
Edit Name - lets you edit the custom search range’s  
name  
Edit Srch Limit - lets you view and select the  
frequency ranges to search. The scanner prompts you  
to enter the upper and lower search limits.  
Set Delay Time- lets you set the amount of time  
the scanner will delay before continuing to search after  
a transmission ends  
Set Modulation - lets you set the custom search  
range’s modulation type  
Set Attenuator - lets you set whether the scanner  
will attenuate reception by 18dB during search  
Set Data Skip - lets you set whether the scanner  
will skip data transmissions during search  
Set Step - lets you set the custom search range’s  
step (the gap between frequencies)  
Set C-Ch Only- lets you search for a Motorola  
control channel. If it finds one, the scanner scans the  
system.  
Search with Scan- sets whether the scanner  
includes the custom search during scanning.  
If unlocked, the scanner first scans all selected  
systems, then searches the selected custom searches  
for the selected hold time (0-255 seconds).  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
• You can also lock and unlock a search range by  
Func  
pressing  
pressing  
, selecting the search range then  
+ L/O.  
Func  
• If you select 0, the scanner then searches the  
entire range one time.  
• The default setting is 2 seconds for each  
search range.  
• The scanner moves to the next system or  
search range after the hold time expires, any  
current transmission ends, and the channel  
delay time expires.  
Editing a Service Search  
You can change the way service search works for  
each service.  
Menu  
Search for ...ꢂ ꢁ  
Edit Service ꢁ  
Select your setting, then press the scroll control.  
Set Delay Time This setting determines how  
long the scanner waits after a transmission ends  
before resuming quick search or Close Call  
operation. Select your setting, then press the scroll  
control.  
Off The scanner resumes immediately when  
the transmission ends.  
1-5 sec The scanner waits the set amount of  
time after the transmission ends before  
resuming.  
• Set Attenuator This setting controls the  
attenuator for search operation. Select your  
setting, then press the scroll control.  
Off The attenuator is off.  
On Reception is attenuated by about 18 dB.  
Searching and Storing  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
• Turn on this setting if you are near other strong  
signal sources. Attenuation sometimes helps to  
reduce interference and desensitization that  
strong signals create.  
• Even if ATTappears, attenuation might not work if  
the bar antenna is turned on and the tuned fre-  
quency is from 0.1 to 1.7 MHz.  
Search with Scan- sets whether the scan-  
ner includes the service search during scan-  
ning. If unlocked, the scanner first scans all  
selected systems, then searches the selected  
service searches for the selected hold time  
(0-255 seconds).  
Notes:  
• You can also lock and unlock a search range by  
Func  
pressing  
pressing  
, selecting the search range then  
+ L/O.  
Func  
• If you select 0, the scanner searches the entire  
range one time.  
• The default setting is 2 seconds for each  
search range.  
• The scanner moves to the next system or  
search range after the hold time expires, any  
current transmission ends, and the channel  
delay time expires.  
Auto Search and Store  
Your scanner’s Auto Store feature lets you search for  
new frequencies in custom search ranges or within a  
service search range on a conventional system, or  
new talk group ID’s on a trunked system.  
Note: You cannot use Auto Search and Store to select  
racing systems or EDACS SCAT systems.  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a System  
To store frequencies or talk group ID’s you find during  
Auto Store, you must first select a system where the  
frequencies or talk group ID’s will be stored.  
Menu  
Search for ...ꢂ ꢁ  
Search and Store ꢁ  
Select the system where you want to store the fre-  
quencies or talk group IDs ꢁ  
If no systems are programmed, No System Stored  
appears. If you have already stored too many systems,  
Over Limitappears.  
Storing a Conventional System  
You can store frequencies into the system you  
selected in “Selecting a System”. Otherwise, the  
scanner stores frequencies in a new group it creates.  
1. Follow Steps 1-3 under “Selecting a System” on  
Page 105. A search option appears.  
2. Turn the scroll control until the type of search you  
want appears, then press the scroll control to  
select it. A search band appears.  
If all systems are locked out, All Locked!  
appears and the scanner does not store any  
frequencies.  
When you select a search range, the scanner looks for  
active frequencies within that range and SEARCH AND  
STOREappears on the display’s lower line and the  
system name and search range name appear on the  
display’s upper line. When the scanner finds an active  
transmission, it checks to see if the frequency has  
already been stored in the system. If the frequency  
has already been stored, the scanner continues to  
search. If the frequency has not been stored, it stores  
the frequency into a group named Found Channels,  
then resumes searching. The scanner creates this  
group if it doesn’t already exist.  
Searching and Storing  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing a Trunked System  
You can store talk group ID’s into the system you  
selected in “Selecting a System”. Otherwise, the  
scanner stores talk group ID’s in a new group it  
creates.  
Note: Trunked system search and store does not work  
if an EDACS SCAT system is selected, a system with  
no frequency is selected, the selected system is  
locked out or the quick key to which the system  
belongs is turned off, and the group you selected to  
store found talk group ID’s contains more talk group  
ID’s than the maximum set in Max Auto Store.  
To store a trunked system, follow Steps 1-3 under  
“Selecting a System” on Page 105. The scanner  
enters ID Search and Store mode.  
If all systems are locked out, All Locked!appears  
and the scanner does not store any frequencies.  
When you select a search range, the scanner looks for  
active talk group ID’s within that range and ID  
SEARCH AND STORE appears on the display’s lower  
line and the system name and search range name  
appear on the display’s upper line. When the scanner  
finds an active talk group ID, it checks if the talk group  
ID has already been stored in the system. If it has, the  
scanner continues to search. If the talk group ID has  
not been stored, it stores the talk group ID into a group  
named Found Channels, then resumes searching.  
The scanner creates this group if it does not already  
exist.  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Close Call Feature  
Your scanner's Close CallTM feature lets you set the  
Using the Close Call Feature  
scanner so it detects, displays the frequency of, and  
lets you hear a nearby strong radio transmission. You  
can set the scanner so the Close Call feature works "in  
the background" while you are scanning other  
frequencies, turn off normal scanning while the Close  
Call feature is working, or turn off the Close Call  
feature and use the scanner normally. You can set the  
scanner so it alerts you when the Close Call feature  
finds a frequency. You can also set the frequency band  
where you want the scanner to look for transmissions.  
Func  
To turn Close Call detection on or off, press  
. When the feature is on,  
then  
appears on the display  
and normal operation is briefly interrupted about every  
2 seconds.  
Notes:  
• The Close Call feature works well for locating the  
source of strong local transmissions such as  
mobile and handheld two-way radios in areas with  
no other strong transmission sources. Several  
factors affect Close Call performance, however.  
Performance is increased with higher transmit  
power, receive antenna tuned to the target band,  
and a low background RF level. Other than the  
antenna, you have no control over these factors,  
but they explain why performance might vary by  
both location and time.  
• The Close Call feature cannot detect satellite  
dishes or any transmitter with a frequency above  
or below the frequency ranges listed under the  
Set CC Bands: option on Page 110.  
• The Close Call feature works better with some  
types of transmissions than others. It might not  
correctly display frequency information for trans-  
mitters using a highly directional antenna (such as  
an amateur radio beam antenna) or if there are  
many transmitters operating at the same time in  
the same area.  
Using the Close Call Feature  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Close Call Options  
Menu  
Close Callꢂ ꢁ  
Select your setting, then press the scroll control.  
Then turn the scroll control to select an option.  
Close Call Only: Lets you set the scanner  
only for Close Call searching. The scanner  
does not scan frequencies or channels when  
this option is turned on. To select this option,  
press E.  
CC Auto Store: Lets you select whether the  
scanner automatically stores Close Call hits  
into channels. If you turn this option on, the  
scanner starts Close Call mode and stores any  
Close Call hits, up to the maximum you  
specified in the Max Auto Store setting. If the  
scanner stores more hits than this setting, it  
stops Autostore operation.  
Turn the scroll control to display an option, then  
press the scroll control.  
Set CC Mode:Lets you select the Close Call  
mode. If you turn this option on, the scanner  
sets itself to its Close Call settings about once  
every 2 seconds.  
Turn the scroll control to display an option, then  
press the scroll control.  
You can also toggle this setting by pressing  
Func  
then  
Set CC Override: Lets you select how the  
Close Call feature works with other scanning  
activities. If you turn this option off, when the  
scanner detects a Close Call signal, CC  
Found! and “E” to listen appear for the  
time you set in Set CC Pause. Press the  
scroll control or E when this appears to jump to  
and hold on the frequency.  
If this option is turned on, the scanner overrides  
the current channel and goes to the Close Call  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
hit. The scanner displays CC Found! Press  
Any Key. When you press a key, the  
frequency appears.  
Turn the scroll control to display an option, then  
press the scroll control.  
Set CC Alert: Lets you select how the  
scanner alerts you when it receives a Close  
Call signal. You can select any of the following  
options.  
Select Mode  
Beep (the scanner beeps when it receives a  
Close Call signal)  
Light (the backlight turns on when it  
receives a Close Call signal)  
Beep+Light (the scanner beeps and the  
backlight turns on when it receives a Close  
Call signal)  
None (the scanner does not alert)  
Select Beep  
Off (the scanner does not beep)  
Alert 1-9 - (the scanner sounds an alert  
beep to notify you of a Close Call hit. When  
you select an alert level, the scanner  
automatically enters the setting of the Alert  
volume level. You can choose different beep  
types.)  
Set CC Pause: Lets you select how long the  
scanner waits after a hit before it returns to the  
previous operation.  
3/5/10/15/30/45/60 sec.  
• Infinite.  
Turn the scroll control to display an option, then  
press the scroll control to select it.  
Using the Close Call Feature  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set CC Bands: Lets you select the Close Call  
band settings. You can turn the following bands  
on or off.  
VHF Low (25.000 - 107.900 MHz)  
Air Band(108.000 - 136.975 MHz)  
VHF High(137.000 - 317.950 MHz)  
UHF1(318.000 - 511.9875 MHz)  
UHF2(512.000 - 763.950 MHz)  
800MHz+(764.0000 - 823.9875 MHz,  
849.0125 - 868.9875 MHz,  
894.0125 - 1300.0000 MHz)  
Use the scroll control to select a band, press  
the scroll control, then use the scroll control to  
select Onor Offand press the scroll control.  
Turning off undesired bands speeds up Close  
Call operation. (The Close Call feature works  
for all frequencies listed above.)  
Close Call Hits  
When the scanner detects a Close Call hit, it alerts you  
according to the Override and Alert settings in the  
previous section. While listening to a Close Call hit,  
you can press Hold to hold on the hit frequency, press  
the scroll control to quickly save the frequency into  
memory, press L/O to lock out the frequency from  
Close Call and Search operation, or wait for the  
transmission to end. If you are in Close Call Only or  
Close Call Override mode, and you do not press any  
key, the scanner returns to its previous operation after  
the transmission ends and the set delay time expires.  
If you are holding on the frequency, press Hold again  
to resume the previous operation.  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search and Close Call Options  
The settings in this section affect custom searches,  
Search and Close Call Options  
service searches, and Close Call operation.  
Managing Locked-Out Frequencies  
While searching or during Close Call operation, if you  
press L/O while the scanner is stopped on a frequency,  
that frequency is locked out of these modes. You can  
lock out up to 200 frequencies.  
Note: Locking out a frequency does not lock out a  
channel that contains that frequency.  
Unlocking All Frequencies  
Menu  
Srch/CloCall Optꢁ  
Freq Lockouts ꢁ  
Unlock All ꢂ ꢁ  
The scanner prompts you to confirm deletion.  
To confirm and delete all locked-out frequencies, press  
the scroll control. Otherwise, to cancel, press  
.
Reviewing Locked Out Frequencies  
Menu  
Srch/CloCall Optꢁ  
Freq Lockouts ꢁ  
Rvw Search L/O ꢂ ꢁ  
The scanner displays the first locked-out frequency  
and prompts you to unlock the frequency. Press the  
scroll control to unlock the frequency. Or, rotate the  
scroll control or press to select a different  
Menu  
frequency. To exit the review, press  
.
Searching for Subaudible Tones  
Menu  
Srch/CloCall Optꢁ  
CTCSS/DCS Search ꢂ ꢁ  
This setting controls whether the scanner will search  
for a subaudible tone when it stops on a transmission  
during search or Close Call operation.  
Search and Close Call Options  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On The scanner searches for and displays any  
subaudible tone found.  
Off The scanner does not search for subaudible  
tones.  
Note: This feature does not operate when the scanner  
is in AM/WFM modulation mode.  
Screening Out Broadcast Sources  
Menu  
Srch/CloCall Optꢁ  
Broadcast Screen ꢂ ꢁ  
This setting determines whether the scanner  
automatically ignores transmissions found during  
Custom Search, Service Search, or Close Call  
operation that are on common broadcasts, paging  
systems, and other annoyance radio sources.  
Note: Broadcast screen is not effective during some  
service searches.  
Set All Band On - turns on broadcast screen on  
each band.  
Set All Band Off - turns off broadcast screen on  
each band.  
Set Each Band - lets you set broadcast screen only  
on specific bands you select. Onor Offappears next  
to each option. Turn the scroll control to select an  
option then press the scroll control to change the  
setting.  
Pager - the scanner skips known paging  
system frequencies.  
AM - the scanner skips known AM frequencies.  
FM - the scanner skips known FM frequencies.  
UHF TV - the scanner skips known UHF TV  
frequencies.  
VHF TV - the scanner skips known VHF TV  
frequencies.  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOAA WX - the scanner skips known NOAA  
weather frequencies.  
Band 1-10 - select the custom band where you  
want to screen out broadcast sources.  
Program Band - lets you program a custom  
frequency range for broadcast screen. Turn the scroll  
control to select an option then press the scroll control  
to change the setting.  
Band 1-10 - select the group where you want to  
screen out broadcast sources.  
Set Lower Limit- turn the scroll control to  
enter the lower limit of the frequency range,  
then press the scroll control to set it.  
Set Upper Limit- turn the scroll control to  
enter the upper limit of the frequency range,  
then press the scroll control to set it.  
Finding Repeater Output  
Frequencies  
Menu  
Srch/CloCall Optꢁ  
Repeater Find ꢂ ꢁ  
This feature sets whether the scanner tries to tune to a  
repeater output frequency during Custom Search,  
Quick Search, or Close Call operation when it detects  
a transmission on a repeater input frequency. Since  
you can normally only hear one side of a conversation  
when you listen to an input frequency transmission,  
turning this feature on can let you hear both sides of  
the conversation.  
OnThe scanner automatically applies repeater  
reverse to detected transmissions. If the scanner  
detects the transmission on the output frequency, it  
beeps, Repeater Foundappears, and it remains on  
the output frequency until transmissions end. If it does  
not detect a transmission on the output frequency, it  
remains on the original frequency.  
Search and Close Call Options  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Off The scanner does not try to find the output  
frequency.  
Setting the Maximum Auto Store  
Value  
Menu  
Srch/CloCall Optꢁ  
Max Auto Store ꢂ ꢁ  
This value sets how many hits the scanner will  
automatically store when it is in either Search and  
Store or Close Call Auto Store mode.  
Use the number keys to enter a value from 1 - 256,  
then press the scroll control.  
When the scanner reaches the maximum number of  
hits you set, it stops the auto-store operation.  
Setting the Modulation Type  
Menu  
Srch/CloCall Optꢁ  
Set Modulation ꢂ ꢁ  
This setting controls the modulation type used for  
quick search and Close Call operations. Select your  
setting, then press the scroll control.  
Auto Uses the default setting for the current  
frequency (see the table at the front of the manual)  
AM Uses AM (amplitude modulation)  
FM Uses FM (frequency modulation)  
NFM Uses narrowband FM  
WFM Uses wideband FM  
Setting Attenuation  
Menu  
Srch/CloCall Optꢁ  
Set Attenuator ꢂ ꢁ  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This setting controls the attenuator for quick search  
and Close Call operation. Select your setting, then  
press the scroll control.  
On Reception is attenuated by about 18 dB.  
Off The attenuator is off.  
Note: Turn on this setting if you are near other strong  
signal sources. Attenuation sometimes helps to  
reduce interference and desensitization that strong sig-  
nals create.  
Setting Data Skip  
Menu  
Srch/CloCall Optꢁ  
Set Data Skip ꢂ ꢁ  
This setting controls how the scanner behaves when it  
stops on a channel that has a data signal.  
On- the scanner stops briefly on the channel, but then  
immediately resumes scanning automatically. Press E  
to select.  
Off- the scanner remains on the channel until the  
transmission stops. Press the scroll control to select.  
Notes:  
• If you are trying to test the Close Call feature with  
a nearby transmitter and you do not talk into the  
transmitter, the scanner will detect this as data and  
will skip the frequency when Data Skip is on. Turn  
the feature off or talk into the transmitter.  
• This setting is ignored for AM channels.  
• The default setting for this feature is Off.  
Setting the Delay Time  
Menu  
Srch/CloCall Optꢁ  
Set Delay Time ꢂ ꢁ  
Search and Close Call Options  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This setting determines how long the scanner waits  
after a transmission ends before resuming quick  
search or Close Call operation. Select your setting,  
then press the scroll control.  
Off The scanner resumes immediately when the  
transmission ends.  
1-5 sec The scanner waits the set amount of time  
after the transmission ends before resuming.  
Note: The default setting is 2 sec.  
Setting the Search Frequency Step  
Menu  
Srch/CloCall Optꢁ  
Set Step ꢂ ꢁ  
This setting selects the frequency step used for setting  
the channels. Select your setting, then press the scroll  
control.  
Auto The step is based on the band (see the table at  
the front of the manual)  
5.0 kHz, 6.25 kHz, 7.5 kHz, 8.33 kHz, 9 kHz,  
10.0 kHz, 12.5 kHz, 15.0 kHz, 20.0 kHz,  
25.0 kHz, 50.0 kHz, 100.0 kHz  
The scanner uses the selected step.  
Note: The scanner defaults to Auto.  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Weather Alert (SAME)  
Your scanner has been primarily designed to be a  
rU(aSdiosAsciannMnegr.EWWh)ile iteinacortpohratees rweaAtherlaelerrt ats  
one of its features, we strongly recommend that you  
not use the scanner as your sole means for receiving  
emergency alerts. Your local electronics retailer  
carries several weather radios specifically designed  
for this function.  
Your scanner allows you to search for a local NOAA  
weather broadcast and set it to alert when a SAME  
weather alert is broadcast on a NOAA channel.  
You can also program SAME codes into the scanner  
and set a weather channel as a priority channel.  
In the following sections, you can also access the  
Func  
weather menu from Hold mode by holding  
then  
pressing wx.  
Searching For a Weather Broadcast  
Menu  
WX Operationꢁ  
Weather Scan ꢂ ꢁ  
The scanner starts scanning the preprogrammed  
weather frequencies, and stops on the first signal.  
If this station is weak, rotate the scroll control to check  
for other weather broadcasts in your area.  
Note: NOAA broadcasts are continuous broadcasts.  
You will only lose reception if you move out of a  
coverage area. If the signal is lost, the scanner  
resumes searching for a weather transmission.  
Turning Weather Alert On/Off  
In weather alert mode, your scanner functions as a  
severe weather warning radio. This is especially useful  
when your area is expecting severe weather  
conditions late at night. When you set the scanner to  
weather alert mode, it holds on the weather channel,  
but does not play the channel’s audio. If it detects a  
weather alert, it sounds a tone, displays information  
Using Weather Alert (SAME)  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
about the weather alert, and turns on the audio so you  
can hear the weather broadcast.  
Menu  
WX Operationꢁ  
Weather Alert ꢂ ꢁ  
This setting determines which types of signals will  
trigger an alert. Select your setting, then press the  
scroll control.  
Alert Only- the scanner alerts when it detects the  
1050 Hz tone that accompanies all weather alerts.  
All FIPS- the scanner alerts and displays  
information about the weather alert when it receives  
any FIPS code (see “Programming a SAME Group” on  
Page 118).  
SAME 1-5- the scanner alerts and displays  
information about the weather alert when it receives a  
weather alert signal that includes any FIPS code you  
have programmed into the specified SAME group.  
Programming a SAME Group  
You can edit any of the 5 SAME groups in your scan-  
ner. Each group can have up to 8 FIPS codes.  
SAME (Specific Area Messaging System) is a system  
developed by the National Weather Service to reduce  
the number of alerts received by consumers by allow-  
ing them to hear alerts only for the county(ies) they are  
interested in. Each alert contains information about the  
type and severity of the alert, as well as the specific  
geographic locations affected by the alert.  
The geographic locations are designated using FIPS  
codes. Each county or parish in the US and its territo-  
ries are assigned a FIPS code. In addition, certain  
special regions and wildcard settings can be assigned.  
FIPS codes are in the format nSSCCC:  
n: A special subcounty designator. For an entire  
county, use 0.  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SS: The state code.  
CCC: The county code.  
For example, Tarrant County in Texas is assigned to  
FIPS code 048439.  
0 indicates the entire county  
48 indicates the state of Texas  
439 indicates Tarrant County  
To get the FIPS code for your county, visit the National  
Weather Service web site at http://www.nws.noaa.gov  
and search for “FIPS Listing”.  
Menu  
WX Operationꢁ  
Program SAME ꢁ  
Select the SAME group to edit ꢁ  
Edit Name- enter the name you want to assign to  
the SAME group you selected.  
Edit County- select the position you want to store  
the FIPS code into, then press the scroll control, enter  
the FIPS code, and press the scroll control again.  
Setting WX Alert Priority  
Menu  
WX Operationꢁ  
WX Alt Priority ꢀ  
On- the scanner checks the weather channels every 5  
seconds for a 1050 Hz weather alert signal. Press the  
scroll control to select.  
Off- the scanner does not check the weather  
channels. Press the scroll control to select.  
Using Weather Alert (SAME)  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Tone-Out  
Fire Tone-Out Introduction  
Your scanner can be set to respond to fire tone-outs  
that use standard two-tone sequential paging, short  
one-tone paging, and long group tone paging. You can  
save up to 10 settings. When you select a setting in  
standby mode, the scanner also monitors for any other  
setting that uses the same transmit frequency, modu-  
lation, and attentuation settings.  
You need tone-out setup information from the agency  
you wish to monitor.Check with your local agency or  
on-line resources. Uniden America Corporation has no  
information regarding local tone-out systems.  
Setting Tone-Out Standby  
Menu  
Tone-Out for... ꢁ  
Tone-Out Standby ꢁ  
Turn the scroll control to select the tone-out to monitor.  
All tone-outs that have the same frequency, modula-  
tion, and attenuation setting as the one you select, are  
also monitored.  
In standby mode, the display cycles through all moni-  
tored tone-out settings.Regardless of the current dis-  
play, the scanner always alerts on any received tone-  
out that matches a stored setting.  
If you press HOLD while in standby mode, the scanner  
temporarily exits the mode and you hear all transmis-  
sions on that frequency. No alerts sound, even if a  
tone-out matches one you have stored. Press HOLD  
again to return to standby mode.  
Setting Up Tone-Out  
Menu  
Tone-Out for ...Tone-Out  
Setup ꢁ  
Scroll to select the tone-out (1 - 10) you want to pro-  
gram, then press EYES. Then you can scroll to any of  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
the following settings and press EYES to select and  
modify the selected settings:  
Edit Name- Sets the name for the selected tone-  
out setting.  
Set Frequency Sets the tone-outs RF fre-  
quency parameters.  
Edit Frequency — Enter the desired fre-  
quency that the scanner should monitor for the  
tone-out.  
Set Modulation— Set the modulation type  
for the paging signal.  
Auto—The scanner uses the default modu-  
lation for the frequency band. If the default  
modulation is AM or WFM, the modulation  
operates as FM.  
FM— The scanner uses FM for the frequency  
band. This is the default setting.  
NFM — The scanner uses NFM modulation.  
Set Attenuaton— Turn the scroll control to  
select Onor Off.  
Set Tone Sets the audio tone frequency for  
the page.  
Edit Tone A— Set the audio frequency  
for Tone A  
Edit Tone B— Set the audio frequency  
for Tone B  
Notes:  
• For two-tone pages, enter a value for A and B.  
• For one-tone pages using short tones of less  
than 3.75 seconds, enter the tone value for A,  
and 0 (zero) for B.  
Using Tone-Out  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• For long-tone pages, such as group pages of  
more than 3.75 seconds, enter 0 (zero) for A  
and the tone value for B.  
Set Delay Time Sets the time the scanner  
remains in monitor mode after the scanner  
receives a page and the carrier drops.  
• 1-5 seconds: the scanner resumes standby  
mode after the carrier drops and the selected  
time expires.  
• Infinite: you must press HOLD after a page to  
resume standby mode.  
• Off: the scanner resumes standby as soon as  
the carrier drops after a page.  
Set Alert— Sets the alert the scanner uses  
when it receives an alert.  
Alert 1 - 9, Off— scroll to select the  
alert tone pattern, The scanner sounds each  
alert as you scroll to its numbered value. If you  
select Off, the scanner does not sound an  
alert.  
• After you select an alert pattern, the scanner  
prompts for the alert level for a received alert.  
Level options 1 to 15 sets a fixed audio level  
independent of the main volume setting. AUTO  
uses the main volume setting for the alerts.  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
General Use  
Cnaanreceand Mainte-  
• Turn the scanner off before disconnecting the  
power.  
• If memory is lost, simply reprogram each channel.  
• Always press each button firmly until you hear the  
entry tone for that key entry.  
Location  
• Do not use the scanner in high-moisture  
environments such as the kitchen or bathroom.  
• Avoid placing the unit in direct sunlight or near  
heating elements or vents.  
• If the scanner receives strong interference or  
electrical noise, move it or its antenna away from  
the source of the noise. If possible, a higher  
elevation might provide better reception.  
• Also try changing the height or angle of the  
antenna.  
Cleaning  
• Disconnect the power to the unit before cleaning.  
• Clean the outside of the scanner with a mild  
detergent.  
To prevent scratches, do not use abrasive  
cleaners or solvents. Be careful not to rub the LCD  
window.  
• Do not use excessive amounts of water.  
Care and Maintenance  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repairs  
Do not attempt any repair. The scanner contains no  
user serviceable parts. Contact the Uniden Customer  
Service Center or take it to a qualified repair  
technician.  
Birdies  
All radios can receive “birdies” (undesired signals).  
If your scanner stops during Scan mode and no sound  
is heard, it might be receiving a birdie. Birdies are  
internally generated signals inherent in the electronics  
of the scanner.  
Press L/O to lock out the channel.  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If your BR330T is not performing properly, try these  
Troubleshooting  
steps.  
Problem Possible Cause  
Suggestion  
The  
The scanner might  
not be receiving  
any power.  
Make sure the AC  
adapter is connected to  
an AC outlet and the  
scanner.  
scanner  
doesn’t  
work.  
If there is a wall switch  
that controls power to  
the AC outlet where  
you connected the AC  
adapter, make sure it is  
on.  
Improper  
The antenna  
Check the antenna  
reception. might need to be  
adjusted.  
connection or move or  
reposition the antenna.  
Move the scanner.  
You might be in a remote  
area that could require  
an optional multi-band  
antenna. Check with  
your dealer or local  
electronics store.  
Scan  
won’t  
stop.  
The squelch might Adjust the squelch  
need to be  
adjusted.  
threshold. See “Turning  
On the Scanner and  
Setting the Squelch” on  
Page 42.  
The antenna  
might need to be  
adjusted.  
Check the antenna  
connection.  
One or more  
Make sure the  
channels might be channels you want to  
locked out.  
scan are not locked  
out.  
The channel’s  
frequency might  
not be stored in  
memory.  
Make sure the  
channel’s frequency is  
stored in the scanner’s  
memory.  
The channel might Wait for a transmission  
not be active.  
on the channel.  
Scan  
won’t  
start.  
You must press  
Scan to scan.  
Press Scan.  
Troubleshooting  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Scan  
The squelch might Adjust the squelch  
won’t  
start.  
(continued)  
need to be  
adjusted.  
threshold. See “Turning  
On the Scanner and  
Setting the Squelch” on  
Page 42.  
One or more  
Make sure the  
channels might be channels you want to  
locked out.  
scan are not locked  
out.  
The antenna  
might need to be  
adjusted.  
Check the antenna  
connection.  
Weather  
scan  
doesn’t  
work.  
The squelch might Adjust the squelch  
need to be  
adjusted.  
threshold. See “Turning  
On the Scanner and  
Setting the Squelch” on  
Page 42.  
The antenna  
might need to be  
adjusted.  
Check the antenna  
connection.  
There might not  
be a NOAA  
Move to an area with a  
NOAA weather  
weatherbroadcast broadcast.  
in your area.  
If you experience difficulty while in TrunkTracker™  
mode, try the following steps.  
Problem Possible Cause  
Suggestion  
Scanner  
won’t  
The system might  
not be one your  
Scan another system.  
track a  
trunked  
system.  
scanner can scan.  
The data  
frequency might  
be missing.  
Enter the data  
frequency.  
The scanner might Change to a Type 1  
need to be scanner setup. Review  
changed to a Type “Programming  
1 scanner setup. Motorola Systems” on  
Page 69.  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Scanner  
won’t  
track a  
trunked  
system.  
(continued)  
The system you  
are trying to scan  
might be LTR or  
EDACS.  
Set the scanner to  
scan LTR or EDACS  
systems. Review  
“Programming LTR  
Systems” on Page 76  
and “Programming  
EDACS Systems” on  
Page 73.  
Scanner  
won’t stop programmed.  
scanning  
No ID’s have been Program one or more  
ID’s or use the ID  
Search mode.  
a trunked  
system.  
The ID’s you have Wait for the ID’s to  
stored are not  
active.  
become active or scan  
another system.  
Scanner  
won’t  
acquire  
the data  
channel.  
The squelch might Adjust the squelch  
need to be  
adjusted.  
threshold. See  
“Turning On the  
Scanner and Setting  
the Squelch” on  
Page 42.  
The frequency  
used for the data  
channel might be  
missing.  
Check your frequency  
list for the data  
channel.  
Missing  
replies to  
conver-  
sations.  
The scanner might Change to a Type 1  
need to be scanner setup. See  
changed to a Type “Programming  
1 scanner setup.  
Motorola Systems” on  
Page 69.  
The fleet map  
Try another preset fleet  
might be incorrect. map or program your  
own fleet map.  
One or more of  
the system’s  
frequencies might  
not be entered.  
Make sure all the  
system’s frequencies  
have been entered.  
The system you  
are trying to scan  
might be LTR or  
EDACS.  
Set the scanner to  
scan LTR or EDACS  
systems. Review  
“Programming LTR  
Systems” on Page 76  
and “Programming  
EDACS Systems” on  
Page 73.  
Troubleshooting  
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you still cannot get satisfactory results while using  
your scanner or if you want additional information,  
please call or write the Uniden Parts and Service  
Division. The address and phone number are listed in  
the Warranty at the end of this manual. If you would  
like immediate assistance, please call Customer Ser-  
vice at (800) 297-1023.  
If you have Internet access, you can visit  
http://www.uniden.com for additional information.  
128  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Certified in accordance with FCC Rules and  
Specifications  
Regulations Part 15, Subpart C, as of date of  
manufacture.  
Dynamic Allocation Capacity  
Systems: 200 max  
Groups: 20 per system  
Channels: 2500  
Channels per Trunked System: up to 200  
Attenuation: 18 dB (nominal), 10 dB (limit)  
Frequency Range (MHz):  
0.1 - 0.525 Longwave Band  
1.705 - 24.995 Shortwave Band  
25.0 - 26.960 Petroleum Prods/Bcst Pick up Band  
26.965 - 27.405 Citizens Band Class D  
27.410 - 27.995 Business/Forest Prods  
72.0 - 75.995 Intersystem and Astronomy  
144.0 - 147.995 2 Meter Amateur Band  
150.8 - 161.9950 VHF High Band  
Above bands in 5 kHz steps  
0.53 - 1.70 AM Broadcast Band  
29.7 - 49.990 VHF Low Band  
Above band in 10 kHz steps  
137.0 - 143.9875 Military Land Mobile  
148.0 - 150.7875 Military Land Mobile  
162.0 - 173.9875 Federal Government  
400.0 - 405.9875 Miscellaneous  
406.0 - 419.9875 Federal Land Mobile  
Specifications  
129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
420.0 - 449.9875 70 cm Amateur Band  
450.0 - 469.9875 UHF Standard Band  
470.0 - 511.9875 UHF TV Band  
764.0 - 775.9875 Public Service Band  
794.0 - 805.9875 Public Service Band  
806.0 - 823.9875 Public Service Band  
849.0125 - 868.9875 Public Service Band  
894.0125 - 956.0 Public Service Band  
Above bands in 12.5 kHz steps  
28.0 - 29.68 10 Meter Amateur Band  
50.0 - 53.98 6 Meter Amateur Band  
216.0 - 224.980 1.25 Meter Amateur Band  
Above bands in 20 kHz steps  
108.0 - 136.9750 Aircraft  
956.025 - 1300.0 25 cm Amateur Band  
Above bands in 25 kHz steps  
54.0 - 71.95 VHF TV Broadcast 2-4  
76.0 - 87.95 VHF TV Broadcast 5-6  
174.0 - 215.95 TV Broadcast 7-13  
225.0 - 399.95 UHF Aircraft Band  
512.0 - 763.95 UHF TV  
776.0 - 793.95 UHF TV  
Above bands in 50 kHz steps  
88.0 - 107.90 FM Broadcast  
Above band in 100 kHz steps  
130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Temperature:  
Normal –20°C to +60°C  
Close Call –10°C to +60°C  
Scan Rate: 90 channels per second  
(conventional mode)  
Search Rate: 140 steps per second (5 kHz step only)  
Scan Delay: 0-5 seconds  
Audio Output: 400mW nominal into 24Ω internal  
speaker  
30 mW nominal into 32Ω headphone  
Power Requirements:  
3 AA Alkaline Batteries (4.5V DC),  
or 3 AA Rechargeable Ni-MH Batteries (3.6V DC),  
or AC Adapter (6 VDC 800mA) (AD-1001)  
Antenna: 50 Ω (Impedance)  
External Jacks:  
Antenna Jack SMA Type  
Headphone Jack 3.5mm  
DC Power Jack (EIAJ TYPE-2 Center Positive)  
4.0mm  
Remote Jack 4 Pin Mini  
Size: 2.40 in. (W) x 1.22 in. (D) x 5.35 in. (H)  
Weight: 0.60 lbs (with batteries installed)  
0.40 lbs (without batteries installed)  
Features, specifications, and availability of optional  
accessories are all subject to change without notice.  
Specifications  
131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Accessories  
Contact your local Uniden Dealer or call the Uniden  
Optional Accessories  
Parts Center at: (800) 554-3988, 8:00AM to 5:00PM  
EST, Monday through Friday, for information about  
ordering these optional accessories.  
Earphone  
External Amplified Speaker  
132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Preset Map 1  
Preset Map 2  
Appendix  
Block  
Size Code  
Block  
Size Code  
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 11  
Size Code 11  
Size Code 11  
Size Code 11  
Size Code 11  
Size Code 11  
Size Code 11  
Size Code 11  
Preset Map 3  
Preset Map 4  
Block  
Size Code  
Block  
Size Code  
0
1
2
3
4
5
6
7
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 12  
(Size Code 12)  
0
1
2
3
4
5
6
7
Size Code 12  
(Size Code 12)  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Preset Map 5  
Preset Map 6  
Block  
Size Code  
Block  
Size Code  
0
1
2
3
4
5
6
7
Size Code 4  
Size Code 4  
Size Code 12  
(Size Code 12)  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
0
1
2
3
4
5
6
7
Size Code 3  
Size Code 10  
Size Code 4  
Size Code 4  
Size Code 12  
(Size Code 12)  
Size Code 12  
(Size Code 12)  
Preset Map 7  
Preset Map 8  
Block  
Size Code  
Block  
Size Code  
0
1
2
3
4
5
6
7
Size Code 10  
Size Code 10  
Size Code 11  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 4  
0
1
2
3
4
5
6
7
Size Code 1  
Size Code 1  
Size Code 2  
Size Code 2  
Size Code 3  
Size Code 3  
Size Code 4  
Size Code 4  
Appendix  
133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preset Map 9  
Preset Map 10  
Block  
Size Code  
Block  
Size Code  
0
1
2
3
4
5
6
7
Size Code 4  
Size Code 4  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
0
1
2
3
4
5
6
7
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 4  
Size Code 4  
Preset Map 11  
Preset Map 12  
Block  
Size Code  
Block  
Size Code  
0
1
2
3
4
5
6
7
Size Code 4  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
0
1
2
3
4
5
6
7
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 0  
Size Code 4  
Preset Map 13  
Preset Map 14  
Block  
Size Code  
Block  
Size Code  
0
1
2
3
4
5
6
7
Size Code 3  
Size Code 3  
Size Code 11  
Size Code 4  
Size Code 4  
Size Code 0  
Size Code 0  
Size Code 0  
0
1
2
3
4
5
6
7
Size Code 4  
Size Code 3  
Size Code 10  
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 12  
(Size Code 12)  
Preset Map 15  
Preset Map 16  
Block  
Size Code  
Block  
Size Code  
0
1
2
3
4
5
6
7
Size Code 4  
Size Code 4  
Size Code 4  
Size Code 11  
Size Code 11  
Size Code 0  
Size Code 12  
(Size Code 12)  
0
1
2
3
4
5
6
7
Size Code 3  
Size Code 10  
Size Code 10  
Size Code 11  
Size Code 0  
Size Code 0  
Size Code 12  
(Size Code 12)  
134  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Defined Fleet Maps  
Type I Programming Information  
When a Type I system is designed, the address  
information for all the ID’s is divided into 8 equal sized  
blocks, numbered 0–7. When you program your  
scanner to track a Type I system, you must select a  
size code for each of these blocks. When you have  
assigned a size code to all 8 blocks, you’ll have  
defined the fleet map for the system you are tracking.  
Each size code determines the number of fleets,  
subfleets, and ID’s each block will have. For example,  
a size code of S-4 has one fleet, which is divided into  
16 separate subfleets, and it has a total of 512  
individual ID’s.  
When a block is assigned a size code, the fleet or  
fleets created within the block are assigned a Type I  
ID. The way these ID’s display on your scanner  
depend on the block number and the block’s size  
code. When a Type I ID appears, the leftmost digit  
represents the block which contains the ID.  
The next 2-3 digits identify which fleet is active, and  
the last digit(s) identifies the subfleet.  
The details concerning how the size codes are  
selected by a Type I System designer are highly  
dependent on the specific needs of the system’s  
users. Some organizations might want many subfleets  
with only a few radios each, while another  
organization might want only a few subfleets with  
many radios each. Your task is to program your fleet  
map with the same size code assignments as the  
trunked system. If you do this accurately, you’ll track  
all the Fleet-Subfleet combinations used by the  
system. In other words, you’ll hear complete  
communications while monitoring a trunked system.  
If you don’t already know the size codes used, you’ll  
have to guess at them. But since you don’t have to  
figure out all the blocks at once, this isn’t as hard as it  
Appendix  
135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
seems. Select a size code for a block, and then press  
Scan. Now listen to the communications. If you decide  
you are receiving most of the replies to the  
conversations with ID’s assigned to the block you just  
programmed, then you’ve probably selected the right  
size code and can work on the next block of the map.  
Finally, for most public safety systems there are some  
size codes which are more common. S-3 and S-4 are  
probably the most common, followed by S-10, S-11,  
and S-12.  
Size Code Restrictions  
If you select size code S-12, S-13, or S-14, there are  
some restrictions as to which blocks can be used for  
these codes.  
S-12 can only be assigned to Blocks 0, 2, 4, or 6.  
S-13 can only be assigned to Blocks 0 and 4.  
S-14 can only be assigned to Block 0.  
Since these size codes require multiple blocks, you  
will be prompted for the next available block when  
programming a fleet map. For example, if you assign  
Block 0 as an S-12, you will be prompted for b2, the  
next block available, instead of b1. And if you assign  
Block 0 as an S-14, you would not see another prompt  
because it uses all available blocks.  
136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planning  
CPolllaecntinngiInnfgormation  
Getting your scanner programmed and scanning takes  
a few steps. This help guides you through these steps  
that will make it easier for you to start scanning.  
1. Collect information about the system(s) you want  
to monitor.  
Do you want to listen to your local police and  
fire departments? How about the highway  
patrol, ambulance service, and aircraft? You  
might even want to listen to your local utility  
company as they track down a break in electri-  
cal service in your area.  
Make a list of the agencies you want to listen to,  
then look up the frequencies and systems used  
by those agencies. The Internet is a great  
source for current frequencies and information  
about scanning. Here are a few useful sites:  
http://www.scannermaster.com/ - frequency  
resources and home of Police Call.  
You can also call them at 1 800 SCANNER  
(hours are from 10:00 a.m. to 5:00 p.m. Eastern  
Time Monday through Friday.)  
http://www.radioreference.com/ - the Internet's  
premier source for user-supported radio system  
information.  
http://www.bearcat1.com/ - frequency information  
from National Communications.  
http://svartifoss2.fcc.gov/reports/index.cfm -  
conventional frequency information on file with the  
US Government  
Tips:  
• Scanners are designed to monitor complex radio  
systems. That means that programming your  
scanner might seem like a daunting task at first.  
Be patient if you don't get it right the first time. You  
can also seek out help locally for the systems you  
Planning  
137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
want to scan by visiting the forums section of  
http://www.radioreference.com/forums.  
• Before you start to program your scanner, decide  
how you want to organize the frequencies you  
want to scan. For example, some areas are best  
organized by geographic location (east, north,  
south, west, central, etc), while others are best  
organized by agency (police, sheriff, ambulance,  
fire, etc.). You might even find it easier to organize  
a mixture of frequencies (north, southeast, and  
west for police but fire all in one group for exam-  
ple).  
2. Organize the system information using these sys-  
tem worksheets included in this appendix.  
• Use “” on Page 143 to organize info about conven-  
tional frequencies.  
• Use “Motorola system Worksheet" on Page 144 to  
organize information about Motorola frequencies.  
• Use "LTR/EDACS System Worksheet" on Page  
146 to organize information about LTR and  
EDACS frequencies.  
3. Follow the instructions in “Filling Out The Conven-  
tional System Worksheet” on Page 139, “Filling  
Out The Motorola Worksheet” on Page 139, and  
“Filling Out the LTR and EDACS Worksheet” on  
Page 141 to program your scanner.  
Tips:  
• Before you start, make as many copies of the  
worksheets as you think you'll need. You can also  
go to the download section of  
http://www.uniden.com/productsupport.cfm and  
download the worksheets there.  
• All worksheet instructions assume that you have  
completed the critical Step 1 (collecting the system  
information). Don't skip this step.  
• Use a pencil to fill out the worksheets. This lets  
you change information if necessary.  
138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Filling Out The Conventional  
System Worksheet  
System Name and Quick Key  
Fill in a name that describes the system you want to  
create. For example, you can enter "Dallas Police" or  
"Amateur Radio" here. If you want to store more than  
one type of frequency, you can enter "Mixed."  
Fill in the key you want to press to quickly activate/  
deactivate the system. You can assign the same quick  
key to multiple systems.  
Group Name and Quick Key  
Each worksheet documents the settings for one chan-  
nel group within a system. If you have fewer channels  
in the group than fits on the page, you can skip a line  
and enter an additional group of channels (enter the  
group info in the line you skipped). If you have more  
channels for the group than will fit on the page, use  
additional pages.  
Func  
Fill in the key you want to press with  
to quickly  
activate/deactivate the channel group. You can assign  
the same quick key to multiple groups within a system.  
Frequency-Alpha Tag-Priority-  
CTCSS/DCS  
Fill in the details for each channel you want to store in  
this channel group.  
Filling Out The Motorola Worksheet  
System Name and Quick Key  
Fill in a name that describes the system you want to cre-  
ate. For example, you can enter "Dallas Police" or  
"Amateur Radio" here. If you want to store more than  
one type of frequency, you can enter "Mixed."  
Planning  
139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fill in the key you want to press to quickly activate/  
deactivate the system. You can assign the same quick  
key to multiple systems.  
System Type  
Circle in the type of Motorola system you are  
scanning.  
• Type 1. A fleet map is supplied for this type of  
system.  
• Type 2 800 MHz Standard. Used for most 800  
MHz systems. No fleet map is supplied for this  
type of system.  
• Type 2 800 MHz Splinter. Used for some 800 MHz  
systems near border areas.  
• Type 2 900 MHz. The supplied frequencies are  
between 935.0125 MHz and 939.9875 MHz.  
No fleet map is supplied for this type of system.  
• Type 2 UHF. The supplied frequencies are  
between 406 MHz and 512 MHz. No fleet map is  
supplied for this type of system.  
• Type 2 VHF. The supplied frequencies are  
between 136 MHz and 174 MHz. No fleet map is  
supplied for this type of system.  
System Frequencies  
Enter the frequencies used by the system. Motorola  
systems can use up to 28 frequencies. Place an  
asterisk or other mark next to frequencies identified as  
data channels.  
Fleet Map (Type I or Type I/Type II  
Hybrid Only)  
Fill in the fleet map used by this agency.  
140  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Band Plan (VHF or UHF Only)  
A band plan is required so the scanner can correctly  
determine the voice channel frequency. Fill in the band  
plan used by this agency, consisting of:  
• Base frequency  
• Step frequency  
• Channel offset  
You can enter up to three band plans.  
Group Name and Quick Key  
Each “Motorola System Worksheet 2” documents the  
settings for one channel group within a system. If you  
have fewer channels in the group than fits on the  
page, you can skip a line and enter an additional  
group of channels (enter the group information in the  
line you skipped). If you have more channels for the  
group than will fit on the page, use additional pages.  
Func  
Fill in the key you want to press with  
to quickly  
activate/deactivate the channel group. You can assign  
the same quick key to multiple groups within a system.  
Talk Group ID-Alpha Tag-Alert  
Fill in the details for each channel you want to store in  
this channel group.  
Filling Out the LTR and EDACS  
Worksheet  
System Name and Quick Key  
Fill in a name that describes the system you want to  
create. For example, you can enter "Dallas Police" or  
Planning  
141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
"Amateur Radio" here. If you want to store more than  
one type of frequency, you can enter "Mixed."  
Fill in the key you want to press to quickly activate/  
deactivate the system. You can assign the same quick  
key to multiple systems.  
System Frequencies and LCN  
Fill in each system frequency and its associated  
Logical Channel Number (LCN).  
Group Name and Quick Key  
Each “LTR/EDACS System Worksheet 2” documents  
the settings for one channel group within a system. If  
you have fewer channels in the group than fits on the  
page, you can skip a line and enter an additional  
group of channels (enter the group information in the  
line you skipped). If you have more channels for the  
group than will fit on the page, use additional pages.  
Func  
Fill in the key you want to press with  
to quickly  
activate/deactivate the channel group. You can assign  
the same quick key to multiple groups within a system.  
Talk Group ID-Alpha Tag-Alert  
Fill in the details for each channel you want to store in  
this channel group.  
142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conventional System Worksheet  
Conventional System Worksheet  
System Name  
Group Name  
System Quick Key  
Group Quick Key  
Frequency  
Alpha Tag  
Priority CTCSS/DCS  
Planning  
143  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Motorola System Worksheet  
Motorola System Worksheet 1  
System Name  
System Quick Key  
Type I  
System  
Type II 800 MHz:  
Standard  
Frequencies  
Splinter  
Type II UHF  
Type II VHF  
Fleet Map  
Block 0  
Block 1  
Block 2  
Block 3  
Block 4  
Block 5  
Block 6  
Block 7  
Band Plan A  
Base Frequency  
Step Frequency  
Offset  
Band Plan B  
Base Frequency  
Step Frequency  
Offset  
Band Plan C  
Base Frequency  
Step Frequency  
Offset  
144  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Motorola System W orksheet 2  
System Name  
Group Name  
Group Quick Key  
Talk Group ID Alpha Tag  
Alert  
Planning  
145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LTR/EDACS System Worksheet  
LTR/EDACS System Worksheet 1  
System Name  
System Quick Key  
System  
Logical  
Frequency  
Channel  
146  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LTR/EDACS System Worksheet 2  
System Name  
Group Name  
System Quick Key  
Group Quick Key  
Talk Group ID Alpha Tag  
Alert  
Planning  
147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preprogrammed Systems  
Your scanner is preprogrammed with over 1000  
Preprogrammed Systems  
channels covering police, fire, and ambulance  
operations in the 25 most populated counties in the  
US. The following list details the preprogrammed  
information.  
By default, all of the preprogrammed systems are  
unlocked, and your scanner begins to scan them when  
you turn it on. To speed up scanning, you can lock out  
systems that are beyond your reception area (typically  
no more than 25 miles using the supplied antenna).  
Follow these steps to lock out systems.  
Func  
1. Press and hold  
.
Func  
2. While continuing to hold  
, rotate the scroll  
control to select a system you want to lock out.  
Func  
3. While continuing to hold  
out the system.  
, press L/O to lock  
4. Repeat Steps 2, 3, and 4 to lock out additional  
systems.  
The preprogrammed systems provide a starting point;  
you will want to find out more information about your  
local radio systems so you can customize the  
programming to better suit your listening preferences.  
Notes:  
• The list is subject to change.  
You might hear transmissions on frequencies  
assigned to very distant stations. This will happen  
if a local system also uses the same frequency.  
Disregard the text tag for these transmissions (e.g.  
if you are in California, you aren’t really receiving  
Florida transmissions even if the scanner displays  
Dade County).  
To free up memory, you can delete systems that  
you will not be monitoring. Refer to “Deleting Sys-  
tems” on Page 88.  
• Data used for the preprogrammed information was  
supplied courtesy of  
http://www.radioreference.com , the Internet’s  
premier scanning resource (RadioReference is not  
affiliated with Uniden America Corporation).  
148  
Download from Www.Somanuals.com. All Manuals Search And Download.  
State  
Quick  
Key  
9
County  
System  
ARCA Remax Cnv  
Champ Conv  
Indy Conv  
NASCAR Busch C  
NASCARCrftsmnCnv  
NASCARNextelCp C  
Chandler MOT  
Maricopa Conv  
Tempe MOT  
Alameda Conv  
Alameda MOT  
--  
--  
--  
--  
--  
--  
--  
--  
--  
--  
9
9
9
9
9
--  
--  
AZ  
AZ  
AZ  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
CA  
FL  
FL  
Maricopa  
Maricopa  
Maricopa  
Alameda  
Alameda  
Los Angeles  
Los Angeles  
Orange  
22  
22  
22  
24  
24  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
26  
26  
26  
26  
27  
27  
27  
29  
29  
29  
29  
29  
29  
29  
29  
29  
29  
32  
32  
32  
34  
34  
Culver City MOT  
Los Angeles Conv  
Orange MOT  
Riverside  
Riverside  
San Bernadino  
San Bernadino  
San Bernadino  
San Bernadino  
San Bernadino  
Los Angeles  
San Diego  
San Diego  
San Diego  
San Diego  
Alameda  
Santa Clara  
Santa Clara  
Broward  
Broward  
Broward  
Dade  
Dade  
Dade  
Broward  
Dade  
Dade  
Palm Springs MOT  
Riverside Conv  
SanBernadinoAMOT  
SanBernadinoBMOT  
SanBernadinoCMOT  
SanBernadinoDMOT  
SanBernadinoEMOT  
Signal Hill MOT  
NationalCity MOT  
San Diego Conv  
San Diego MOT  
SanDiegoCity MOT  
Oakland EDACS  
Santa Clara Conv  
Santa Clara MOT  
Broward Cnty MOT  
Broward Conv  
Coral SpringsMOT  
Dade Conv  
Dade EDACS  
Dade Fire EDACS  
Ft.LauderdaleMOT  
Miami Beach MOT  
Miami MOT  
Plantation MOT  
Cook Conv  
FL  
FL  
FL  
FL  
FL  
FL  
FL  
FL  
IL  
IL  
IL  
MA  
MA  
MI  
Broward  
Cook  
Cook  
Cook  
Middlesex  
Middlesex  
Wayne  
NW Central MOT  
Schaumburg MOT  
Cambridge  
Middlesex Conv  
Wayne Conv  
36  
Preprogrammed Systems  
149  
Download from Www.Somanuals.com. All Manuals Search And Download.  
State  
Quick  
County  
System  
Key  
Suffolk  
New York  
Suffolk  
Cuyahoga  
Cuyahoga  
Philadelphia  
East Hampton MOT  
New York Conv  
SuffolkCountyMOT  
Cuyahoga Conv  
Parma EDACS  
42  
NY  
NY  
NY  
OH  
OH  
45  
45  
47  
47  
49  
PhiladelphiaConv  
PA  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
TX  
WA  
WA  
NV  
--  
--  
--  
--  
--  
--  
Tarrant  
Dallas  
Dallas  
Dallas  
Tarrant  
Dallas  
Dallas  
Dallas  
Dallas  
Dallas  
Tarrant  
Dallas  
Tarrant  
Harris  
Bexar  
Harris  
King  
King  
Clark  
--  
--  
--  
--  
--  
--  
Arlington MOT  
Carrolton MOT  
Dallas Conv  
52  
52  
52  
52  
52  
52  
52  
52  
52  
52  
52  
52  
52  
53  
54  
55  
57  
57  
Dallas MOT  
Fort Worth MOT  
Garland MOT  
GrandPrairie MOT  
Irving EDACS  
Lewisville MOT  
Mesquite MOT  
NE Tarrant MOT  
Richardson EDACS  
Tarrant Conv  
Harris Conv  
Bexar Conv  
STARNET MOT  
PortOfSeattleMOT  
Seattle MOT  
Clark County MOT  
ARCA Remax Srs  
Champ Series  
59  
0
0
0
0
Indy Racing  
NASCAR Busch Srs  
NASCARCrftsmnTrk  
NASCARNextel Cup  
0
0
150  
Download from Www.Somanuals.com. All Manuals Search And Download.  
One-Year Limited Warranty  
Important: Evidence of original purchase is required  
OWnaerr-aYnetayr Limited  
for warranty service.  
WARRANTOR: UNIDEN AMERICA  
CORPORATION (“Uniden”)  
ELEMENTS OF WARRANTY: Uniden warrants, for  
one year, to the original retail owner, this Uniden  
Product to be free from defects in materials and  
craftsmanship with only the limitations or exclusions  
set out below.  
WARRANTY DURATION: This warranty to the original  
user shall terminate and be of no further effect 12  
months after the date of original retail sale. The  
warranty is invalid if the Product is (A) damaged or not  
maintained as reasonable or necessary, (B) modified,  
altered, or used as part of any conversion kits, subas-  
semblies, or any configurations not sold by Uniden,  
(C) improperly installed, (D) serviced or repaired by  
someone other than an authorized Uniden service  
center for a defect or malfunction covered by this  
warranty, (E) used in any conjunction with equipment  
or parts or as part of any system not manufactured by  
Uniden, or (F) installed or programmed by anyone  
other than as detailed by the Operating Guide for this  
product.  
STATEMENT OF REMEDY: In the event that the  
product does not conform to this warranty at any time  
while this warranty is in effect, warrantor will repair the  
defect and return it to you without charge for parts,  
service, or any other cost (except shipping and  
handling) incurred by warrantor or its representatives  
in connection with the performance of this warranty.  
THE LIMITED WARRANTY SET FORTH ABOVE IS  
THE SOLE AND ENTIRE WARRANTY PERTAINING  
TO THE PRODUCT AND IS IN LIEU OF AND  
EXCLUDES ALL OTHER WARRANTIES OF ANY  
NATURE WHATSOEVER, WHETHER EXPRESS,  
IMPLIED OR ARISING BY OPERATION OF LAW,  
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED  
WARRANTIES OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE. THIS  
One-Year Limited Warranty  
151  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY DOES NOT COVER OR PROVIDE FOR  
THE REIMBURSEMENT OR PAYMENT OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES.  
Some states do not allow this exclusion or limitation of  
incidental or consequential damages so the above  
limitation or exclusion might not apply to you.  
LEGAL REMEDIES: This warranty gives you specific  
legal rights, and you might also have other rights  
which vary from state to state. This warranty is void  
outside the United States of America.  
PROCEDURE FOR OBTAINING PERFORMANCE  
OF WARRANTY: If, after following the instructions in  
this Operating Guide you are certain that the Product  
is defective, pack the Product carefully (preferably in  
its original packaging). Include evidence of original  
purchase and a note describing the defect that has  
caused you to return it. The Product should be  
shipped freight prepaid, by traceable means, or  
delivered, to warrantor at:  
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Boulevard  
Fort Worth, TX 76155  
(800) 297-1023, 8:00 a.m. to 5:00 p.m., Central,  
Monday through Friday  
152  
Download from Www.Somanuals.com. All Manuals Search And Download.  
153  
Download from Www.Somanuals.com. All Manuals Search And Download.  
154  
Download from Www.Somanuals.com. All Manuals Search And Download.  
155  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REGISTER ONLINE TODAY!  
THANK YOU FOR BUYING A UNIDEN PRODUCT.  
May be covered under one or more of the following U.S. patents.  
4,398,304 4,409,688 4,455,679 4,461,036 4,521,915 4,597,104  
4,627,100 4,841,302 4,888,815 4,932,074  
4,947,456 5,014,348  
5,199,109 5,408,692 5,428,826 5,438,688 5,448,256 5,465,402  
5,471,660 5,483,684 5,530,296 5,548,832 5,571,071 5,574,995  
5,577,076 5,598,430 5,600,223 5,642,424 5,710,992 5,859,875  
5,896,422 5,991,346 5,991,603 6,012,158 6,025,758 6,034,573  
6,064,270 6,266,521  
©2005. Uniden America Corporation, Fort Worth, Texas  
Contains additional foreign articles. Custom manufactured in  
China.  
UBZZ01330ZZ(0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Fryer SM40G User Manual
TOA Electronics Microphone WM 370 User Manual
Toastmaster Blender 1135 User Manual
Toshiba Power Supply VF PS1 User Manual
Toshiba Remote Starter ME00070B User Manual
Trane Dehumidifier TCONT802AS32DA User Manual
Tripp Lite Surge Protector DB15 User Manual
Tritton Technologies Video Game Controller AX360 AUDIO EXTREME User Manual
Uniden Telephone WDECT 2345+1 User Manual
Weber Water Dispenser 43176 User Manual