UH076DLX
Handheld UHF-CB Transceiver
For more exciting new products please visit our website:
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Features
4
5
5
6
Included in your Package
Optional Accessories
Controls and Indicators
Getting Started
Connect Drop-in Charger with the AC Adaptor
Attaching the Antenna
Attaching the Battery Pack
Attaching the Beltclip
Charging the Battery Pack
Battery Level Display
SPKR/MIC Jack Cap
Connecting the SPKR/MIC
Mount the Hang Up Bracket
Operation
7
7
8
8
9
10
11
11
11
Power On/Off
Volume
Adjusting the Key Beeps
Roger Beep
Selecting Channel
12
12
12
13
13
14
15
16
17
17
17
18
19
19
19
19
20
20
20
21
21
22
22
22
23
24
25
27
Squelch
To Transmit and Receive
Using a Repeater Channel
To Operate UH076DLX in Duplex Mode
Scanning
Open Scan (OS) Mode
Group Scan (GS) Mode
Programming Scan Channels
Priority Channel
Choosing a Priority Channel
Drop-Out Delay
Advanced Features
CTCSS
VOX
Power Save
Back Lighting
Keypad Lock
Busy Channel Lock-out (BCL)
Monitor
CTCSS Codes and Frequencies
UHF-CB Channel Guidelines
UHF-CB Channels and Frequencies
Warranty
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The UH076DLX is a JIS7 Waterproof, portable two-way UHF-CB radio. It is
compact, rugged and fits easily in your hand. This hand held UHF-CB radio
will give you consistent, outstanding performance in virtually all conditions and
situations. To ensure that you get the most from the UH076DLX features,
please read this operating guide carefully before using the unit.
FEATURES
• Narrow Band (NB) Radio
• Communicate with up to 80 Channels in the UHF-CB Band1
• 5W Max TX Power
• 1W/5W Switchable TX Power
• Built-in AVS Circuitry2
• Waterproof (meets JIS7 waterproof specifications)3
• Rubber Grips/Seal
• 38 Built-in CTCSS codes
• Backlit Keypad & LCD Display
• Duplex Mode1
• Open and Group Scan
• Busy Channel Lockout Function
• VOX Function
• Headset Jack
• Keypad Lock
• Battery Type: Lithium-lon Rechargeable
• Low Battery Alert
• Battery strength Indicator
• Auto Battery Save
• Battery Cover with charge contacts
• Roger Beep
¹ Refer to p.23 - p.26 for channel information
² AVS - Automatic Volume Stabilizer detects and manages incoming
audio to comparable levels.
3
The UH076DLX radio meets waterproof (JIS7) specifications only
when the battery, the antenna and speaker MIC jack cap are correctly
installed. The UH076DLX will retain its JIS7 rating when the
accessory Speaker MIC is connected correctly but the Speaker MIC
itself is not splash or waterproof.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Included in your Package
Antenna
AC Adaptor
(AAD-008S(M))
UH076DLX
External Speaker
Mic (SM-078)
Drop-in Charger
Lithium Battery X2
(DT078A)
(BP079)
Earphone Mic
(EM-078)
Belt Clip and
Wrist Strap
Cigarette Lead Charger
with Hang Up Bracket
(CK 078)
Owner’s Manual
If any of these items are missing from the box, contact your
place of purchase, immediately.
NOTE
Optional Accessories
• VOX Headset
• Heavy Duty Speaker Mic
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
1/5w
1
2
3
4
5
6
7
Antenna
Beltclip
Battery
Battery Release Clip
PTT (Push to Talk) Key
Memory Key (mem)
Scan Button (scan)/
Busy Channel Lock-Out
Mode (bcl)
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Transmit
1W Power
Duplex Transmit
Scanning
Monitor
8
9
TX Power/Lock Button
Microphone
10 Speaker MIC Jack
11 ON/OFF VOL Knob
12 Squelch Knob (SQ)
13 LCD Display
14 Monitor Button (mon)
15 Open Scan/Group Scan
(os/gs)/VOX
16 Channel Up Button (
17 Duplex Key (dup)/
CTCSS Key (ctcss)
18 Channel Down Button (
19 Speaker
Priority
Busy Channel Lock Out
Group Scanning
Channel Numbers
CTCSS
VOX
)
Roger Beep
Battery Level Indicator
Key Lock
Memory
Receive
)
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connect Drop-in Charger with AC Adaptor
Plug one end of the AC adaptor into the wall
outlet and the other end into the drop-in charger.
OR...
Connect Cigarette Lead Charger
to Cigarette Lighter Jack
The drop-in charger and cigarette lead charger are not
water proof. Ensure the radio is dry before connecting to the
charger. Don’t use the chargers when the ambient
temperature is below 0º C (32º F) or above 45º C (113º F)
Input Voltage (Cigarette Lead Charger): +12VDC
to+24VDC.
NOTE
Attaching the Antenna
Attach the antenna to the UH076DLX.
Be sure the antenna is firmly seated.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Contacts
Attaching the Battery Pack
1. Place the battery pack onto the back of the
radio. It will only fit in one way.
2. Snap the battery release clip until it clicks.
Be sure the battery pack fits tightly against
the UH076DLX body.
Avoid exposing the Lithium Ion battery, attached or
unattached to the radio, in direct sunshine, heated cars, or
in areas with temperatures below –20°C (–4°F) or above
+60°C (+140°F).
Exposing the chemicals contained within the battery pack to
temperatures above +60 °C (+140°F) may cause the battery
to rupture, fail or reduce performance.
CAUTION
In case of exposure to cell contents, wash the affected area
thoroughly, and seek medical attention.
Additional battery cautions should be applied as described
on p.2.
Attaching the Beltclip
1. Hold the beltclip in the direction.
2. Apply it to the hanger piece on the back of
the radio. Then slide it up.
3. You will hear a click. The beltclip is firmly
attached.
4. To take the beltclip off the radio, turn it
and slid it up.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Charging the Battery Pack
Your radio is powered by a specially designed Lithium Ion battery pack.
• Before operating the UH076DLX, charge the Lithium Ion battery pack
for 5 hours without interruption in the drop-in charger or 3.5 hours
without interruption in the cigarette lead charger.
For the initial battery charge, make sure the radio is off for
optimum charging.
NOTE
The drop-in charger can charge the Lithium Ion
battery pack attached to the UH076DLX, in the front
charging slot and also charge a second Lithium Ion
battery pack separately in the rear charging slot.
When you charge the 2nd battery, be sure to push it
all the way into the charge slot.
1. Place the UH076DLX, in the drop-in charger.
2. The red LED illuminates and stays ON, until fully
charged.
• The charger won’t overcharge the battery packs.
When charging is completed, the charge LED is no
longer illuminated.
• Do not transmit when the UH076DLX, is in the
drop-in charger!
• You can monitor incoming calls while the UH-
076DLX, is in the drop-in charger.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Battery Level Display
The BATTERY icon in the top right hand corner of the screen indicates
the UH076DLX current battery voltage level at all times. The battery
level is displayed in 4 levels.
LEVEL 3
LEVEL 4
Battery approx.
Battery 100% full
40% capacity
LEVEL 2
Low Battery
LEVEL 1 (flashing)
Empty Battery
PTT
When
is pressed at Level Empty, battery icon and
channel number will flash, transmission is disabled.
NOTE
NOTE
Recharge the battery at any time. From empty the battery
will take up to 5 hours to fully charge.
When charging with the cigarette lead charger the
UH076DLX charges slowly and increases to the Battery
Level indication are inhibited. Switch the radio OFF then ON
for an accurate display.
NOTE
Battery Life : 14 Hours (Typical)
This is based on the following Duty Cycle:
Transmit (Low Power)
Receive
5%
5%
Stand-by
90%
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
SPKR/MIC Jack Cap
Make sure the SPKR/MIC jack cap is firmly pushed in to maintain
submersible rating.
Connecting the SPKR/MIC
Release the SPKR/MIC jack cap to plug in the SPKR/MIC. Secure the
SPKR/MIC plug by tightening the plug collar clockwise.
Mount the Hang-Up Bracket
Use the radio Hang-up Bracket when charging the UH076DLX with the
Cigarette Lead Charger in a vehicle. The radio Hang-up Bracket comes
in two parts. How and where you choose to mount the Hang-up Bracket
will determine which parts to use.
Conventional Mounting with Screws
Use the front part of the Hang-up Bracket only.
Locate a suitable mounting position in the vehicle
and mark and drill two 3mm holes. Fix the Hang-
up Bracket into place with screws.
Conventional Mounting with Double Sided Tape
(not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the Hang-up Bracket using the
supplied binding screws.
Locate a suitable mounting position.
Apply high quality Double-Sided tape
onto the flat area of the Hang-up
Bracket back piece and then press
firmly to the mounting position.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
• See the Controls and Indicators page at the back of this operating
guide for button and key operations.
Power On/Off
To turn the unit ON, rotate the [ON/OFF VOL]
clockwise. A channel number and battery level
should appear on the display.
UH076DLX
To turn the unit OFF, rotate the [ON/OFF VOL]
knob counter-clockwise. The display will disappear.
Volume
Rotate the [ON/OFF VOL] knob clockwise or counter-clockwise to adjust
speaker volume to desired listening level.
Adjusting the Key Beeps
Your radio emits a beep each time-one of the keys (except for the PTT or
mon) are pressed.
dup
To turn OFF this beep: Press and hold
To turn ON this beep: Press and hold
while turning on the radio.
while turning on the radio.
dup
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Roger Beep
Roger Beep is a BEEP that is sent to notify the end of transmission
(both PTT and VOX transmission.) Roger Beep can be heard through
the speaker when Key Beep is on. Roger Beep is transmitted even if
key beep is turned off. However Roger Beep will not be heard from the
speaker.
To turn ON Roger Beep: Press and hold
radio.
while turning on the
while turning on the
To turn OFF Roger Beep: Press and hold
radio.
Selecting Channel
Press
or
to select the desired channel.
If you press and hold the
scroll rapidly.
or
, channel number will
NOTE
For your reference a list of the available channels,
corresponding frequencies and guidelines for their use and
selection is printed on page 23. For Australia, Channels 05
and 35 are reserved for Emergency Calls.
NOTE
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Squelch
The squelch is used to eliminate any annoying background noise when
there are no signals present.
Make sure to first select a channel not in use before setting
the squelch in your UH076DLX UHF-CB radio.
NOTE
Strong Signals
Think of squelch as a gate. Turn [SQ] fully
clockwise. This raises the “Squelch Gate” so high
Medium Signals
that only the very strong signals can get through.
Weak Signals
Noise
Turn [SQ] fully counter clockwise until you hear a
hiss. This opens the “Squelch Gate” so that
everything gets through noise, weak signal, and
UH076DLX
UH076SX
strong signals.
To set the “Squelch Gate” to the desired level, turn
[SQ] counter-clockwise until you hear noise. Then
turn the [SQ] clockwise just until the noise
stopped. Now only the desired signal can get
through.
If an incoming signal is very weak there is a possibility that
you will have a choppy or broken reception, due to the
sensitivity of the squelch. In this case, simply rotate the
[SQ] clockwise until the weak signal is heard clearly.
NOTE
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
To Transmit and Receive
The UH076DLX uses the UHF-CB Channels. For your reference a list of
the available channels and corresponding frequencies is printed on p.24
- p.25.
1. The maximum RF transmit power of UH076DLX is 5 Watts.
1/5w
To switch to low power, press
. LOW
appears on the LCD.
1/5w
To switch back to higher power, press
again. LOW indicator disappears from the LCD.
2. Before you transmit, listen for activity on the
selected channel.
3. When the channel is clear, press and hold the
PTT
to transmit. TX appears on the LCD.
Hold the radio with microphone approximately
five cms in front of your mouth with the
antenna at approximately 45* angle away from
your head. Speak in a clear, normal
conversational voice.
4. When you have finished speaking, release the
PTT
and listen for a response. TX indicator
then disappears on the LCD.
The display shows BUSY when a transmission
is being received by your radio.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Using a Repeater Channel
UHF-CB Repeaters are used to retransmit or relay your signal.
Repeaters will extend the range of your radio and overcome the
shielding effect caused by solid obstructions.
In normal Simplex operation, your radio transmits on one particular
frequency and receives on that same frequency. If there is a barrier (i.e.
a Tall Building) that partially blocks your transmitted signal, the possibility
of the other radio receiving the signal is very slim. Valleys, metallic
structures, etc., tend to act as a screen between radios.
Standard Operation without the aid of a Repeater Station
Operation with the aid of a Repeater
With Duplex operation, the signal coming from your radio is received
by the Repeater station and then re-transmitted at the same time on
another channel.
Your UH076DLX is designed with duplex capability on Channels 1 to 8
and Channels 41 to 48. When any of these channels are set to operate
in duplex mode during transmission, the UH076DLX automatically sends
the signal at a frequency 30 channels above the original in order to access
the repeater station. After transmitting, the radio reverts back to its original
operating frequency.
For example:
1. CH01 is on Duplex Mode - will receive on CH01 but Transmit on CH31
2. CH41 is on Duplex Mode - will receive on CH41 but Transmit on CH71,
etc... Refer to UHF-CB Channel & Frequencies table on p.25 - p.26.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
To Operate UH076DLX in Duplex Mode
Only channels 01 - 08 and 41 - 48 are available for Duplex.
Eg. CH01 is being used in your area for repeater use.
dup
Press
Press
momentarily. The DUP icon appears.
dup
again to deactivate the duplex operation.
UH076DLX will return to simplex operation.
Check with your local retailer for available repeaters.
NOTE
Scanning
The UH076DLX has two types of scanning; Open Scanning (OS)
and Group Scanning (GS). Scanning allows you to search for active
channels programmed in the OS or GS memory.
To initiate scanning;
scan
Press
and scanning starts. SCAN icon flashes during scanning.
Open Scan (OS) Mode
The absence of GS icon indicates that the unit is in OS mode. Allows
continuous scanning of channels stored in the Open Scan (OS) memory.
If an active channel is found, scanning will stop on that channel.
The factory has preprogrammed all the UHF-CB channels
into the Open Scan channel memory. However, you can
change or customize the channels by following the steps on
programming Scan Channels on page 18.
NOTE
Example: CH80 becomes active
If the received signal cease, the unit will wait for at least 3 seconds for
the signal to return, otherwise scanning resumes.
mem
To skip the active channel, press
To deactivate SCAN, press
momentarily. Scanning resumes.
scan
PTT
or
.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
If SCAN is deactivated while in an active channel, the
UH076DLX will stay on that active channel. If no other
channels are active, the UH076DLX will reinstate the
starting channel.
NOTE
Group Scan (GS) Mode
Allows you to monitor a Priority Channel while scanning.
os/gs
To use GS Mode Scanning, press the
the display.
key. GS icon appears on
GS Scanning checks the Priority channel activity regularly.
If GS Scanning is initiated when there are no channels
programmed in GS memory, an error tone will be heard and
NOTE
scanning will not start.
If the Priority channel becomes active the radio will stay on that channel
for as long as the signal is present. If the received signal ceases, Priority
scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority
Channel the UH076DLX will continue monitoring the Priority
NOTE
Channel for activity while listening to the active one.
scan
PTT
To deactivate SCAN, press
or
.
If SCAN is deactivated while it is turned to an active
channel, the UH076DLX will stay on that active channel.
If none of the channels are active, the UH076DLX will
reinstate the Priority channel.
NOTE
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Programming Scan Channels
1. Select which Scanning Mode you wish to use OS or GS Mode.
OS is indicated by the absence of the GS icon.
NOTE
2. Select the channel you want to store by pressing
or
.
mem
3. Press and hold
for 1.5 secs. to store. MEM icon appears and
two short tone beeps are heard.
mem
4. To remove the channels from Memory, press and hold
for 1.5
secs. once more. Two short tone beeps are heard and the MEM icon
disappears.
Priority Channel
The Priority Channel feature allows the user to monitor one channel in
the UH076DLX, monitoring it every 1.5 secs. during Group Scanning.
Choosing a Priority Channel
The starting channel, when Group Scanning is
initiated, is always the Priority Channel. To change
the priority channel setting while scanning,
(eg. PRI Channel is CH17 (476.825 MHz ));
a. press
, to select a higher channel
(scanning pauses).
or
b. press
, to select a lower channel
(scanning pauses).
Drop-out Delay
While scanning, the UH076DLX stops at a busy channel and receives a
signal. When the received signal is over, the unit will wait for 3 seconds
for the return of the signal, otherwise, the radio resumes scanning.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Advanced Features
CTCSS (Continuous Tone Coded Squelch System)
CTCSS is a feature that allows a group to talk to each other without
hearing other users on the same channel.
Programming CTCSS Code
1. Select a desired channel to be used with CTCSS.
ctcss
2. Press and hold
for 1.5 secs. CTCSS icon blinks.
3. Press
4. Press
or
to select the desired CTCSS code.
ctcss
to save the selected code. CTCSS icon stops blinking.
The UH076DLX will return to standby mode after 10 secs.
of no activity. CTCSS code can be programmed on every
channel. There are 38 available CTCSS tone per channel.
NOTE
CTCSS Scan Operation
scan
1. Press
to start scanning (GS or OS) mode.
ctcss
2. Press and hold
to change to CTCSS scan mode.
3. When a signal is sensed on a CTCSS CH, the UH076DLX stops for
about 400 msecs (decode time) to decode the CTCSS code. If there is
no code or the receive code does not match the one programmed on
the unit, the unit resumes scanning.
Channels 5 and 35 are used for emergency channels.
CTCSS will not operate on these channels.
NOTE
VOX
• Built-in Voice Activated Circuit (VOX) feature enables the user to
transmit automatically by speaking on the microphone of the VOX
headset (not supplied) without pressing the PTT switch.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
VOX feature will not work without the VOX Headset
Microphone. The built in mic of UH076DLX is temporarily
disabled when VOX feature is working, however accidental
NOTE
PTT
pressing of
will cause the unit to transmit briefly.
To activate VOX
1. Press and hold
2. Press either
vox
for 1.5 secs. VOX icon blinks.
or
within 10 secs to select the desired
VOX sensitivity level (9 with the lowest sensitivity to 1 with the
highest sensitivity).
vox
3. Press
to save the selected level. VOX icon stops blinking.
4. Install VOX Headset (not supplied) to UH076DLX.
To De-activate VOX
1. Remove VOX Headset from UH076DLX.
vox
2. Press and hold
for 1.5 secs. until VOX blinks.
3. Press
4. Press
repeatedly and until oF is displayed.
vox
to save the setting. VOX icon disappears.
Changing the VOX sensitivity setting to oF without removing
the microphone will cause the unit to transmit continuously.
NOTE
Power Save
Battery Save feature extends the battery life by switching the receiver
circuit power ON and OFF. This feature automatically activates during
standby mode (RX mode without signal).
Back Lighting
The Liquid Crystal Display (LCD) and function keys are backlit for easy
viewing at night or in low light situations. The back lighting automatically
switches ON every time a key (except PTT) is pressed. It turns OFF 5
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
secs after the last key is pressed.
Keypad Lock
To prevent accidental entries, you can lock the keypad.
lock
Press and hold the
button until it beeps to activate Key Lock.
icon appears.
lock
To unlock the keypad, press and hold the
disappears.
button again.
icon
When the Key Lock is active, a warning beep will be heard if
you attempt to press keys. (except for the PTT button).
NOTE
Busy Channel Lock-out (BCL)
This feature prevents accidental transmission on a busy channel.
This is recommended on channels where CTCSS is being used. If you
hear sound from the speaker (unless it’s in Monitor Mode -- see below),
the BCL feature will prevent you from transmitting.
To activate BCL
Press and hold
bcl
for 1.5 secs. until BCL appears on display.
To De-activate BCL
bcl
Press and hold
for 1.5 secs. until BCL disappears from the display.
Monitor
This feature enables users to listen in for weak signals on the current
channel at the press of a button.
To use monitor
• For brief listening, press
mon
.
mon
• For continuous listening. Press and hold
for 2 sec. A two tone
beep will be heard and the receiver circuit will stay open letting in both
the noise & weak signals.
• Display shows MON and BUSY icons.
• To return to normal receive mode press
mon
.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CTCSS Codes and Frequencies
Code No.
Frequency (Hz)
OFF
Code No.
20
Frequency (Hz)
131.8
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
223.6
241.8
250.3
“oF’
1
67.0
21
2
71.9
22
3
74.4
23
4
77.0
24
5
79.7
25
6
82.5
26
7
85.4
27
8
88.5
28
9
91.5
29
10
11
12
13
14
15
16
17
18
19
94.8
30
97.4
31
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
32
33
34
35
36
37
38
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
23
Download from Www.Somanuals.com. All Manuals Search And Download.
UHF-CB Channel Guidelines
Always listen on a channel (or observe the receive signal level
meter) to ensure it is not already being used before transmitting.
Channels 5 and 35 are used for emergency channels.
CTCSS will not operate on these channels.
Please follow these guidelines for channel use in Australia:
• Channels 05 and 35 are Emergency Channels.
• Channel 11 is a Calling Channel.
• Channels 22 and 23 are for telemetry and telecommand
applications, channels 61, 62 and 63 are for future use and TX is
inhibited on these channels.
NOTE
General communication is accepted on all other channels
with these guidelines:
• Channel 40 - road channel (Australia).
• Channels 01-08 (and 31-38), and Channels 41-48
(and 71-78) are repeater channels.
Important information - 80 Channel UHF-CB channel expansion
To provide all users additional channel capacity within the UHF-CB
Band. The ACMA will change the majority of the current wideband 40
channel use to narrowband channel use. This allows for additional
channels to be added, up to 80 Channels.
This simply means that the new narrowband radio you have purchased
will have more channels than older radios. Please refer to the guidelines
above and the channel chart for further channel information.
A list of currently authorised channels can also be obtained from the
ACMA website in Australia and the MED website in New Zealand.
Interference / Poor Audio
When a new narrowband radio receives a signal from an older
wideband radio the speech may sound loud - however the
UH076DLX’s built-in AVS (Automatic Volume Stabilizer) circuitry will
detect and manage incoming audio to comparable levels.
NOTE
Narrowband radios operating on CH41 - CH80 may encounter
interference from a nearby wideband radios transmitting on high
power on an adjacent channel (frequency).
When an older wideband radio receives a signal from a new
narrowband radio the speech may sound quiet - the wideband radio
user simply adjusts their radio volume for best performance.
The above situations are not a fault of the radio but a symptom of mixed
wideband and narrowband radios in current use. It is expected that as
older wideband radios are phased out this issue will be eliminated.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
24
Download from Www.Somanuals.com. All Manuals Search And Download.
UHF-CB Channels and Frequencies
Simplex Mode
Transmit
/ Receive
Simplex Mode
Transmit
/ Receive
Duplex Mode
Transmit
Frequency (MHz)
CH
No.
CH
No.
Frequency (MHz)
Frequency (MHz)
1
2
476.425
476.450
476.475
476.500
476.525
476.550
476.575
476.600
476.625
476.650
476.675
476.700
476.725
476.750
476.775
476.800
476.825
476.850
476.875
476.900
477.175 (CH31)
477.200 (CH32)
477.225 (CH33)
477.250 (CH34)
477.275 (CH35)
477.300 (CH36)
477.325 (CH37)
477.350 (CH38)
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
476.925
476.950 (RX only)
476.975 (RX only)
477.000
3
4
5
477.025
6
477.050
7
477.075
8
477.100
9
477.125
10
11
12
13
14
15
16
17
18
19
20
477.150
477.175
477.200
477.225
477.250
477.275
477.300
477.325
477.350
477.375
477.400
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
25
Download from Www.Somanuals.com. All Manuals Search And Download.
UHF-CB Channels and Frequencies
Simplex Mode
Transmit
/ Receive
Simplex Mode
Transmit
/ Receive
Duplex Mode
Transmit
Frequency (MHz)
CH
No.
CH
No.
Frequency (MHz)
Frequency (MHz)
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
476.4375
476.4625
476.4875
476.5125
476.5375
476.5625
476.5875
476.6125
476.6375
476.6625
476.6875
476.7125
476.7375
476.7625
476.7875
476.8125
476.8375
476.8625
476.8875
476.9125
477.1875 (CH 71)
477.2125 (CH 72)
477.2375 (CH 73)
477.2625 (CH 74)
477.2875 (CH 75)
477.3125 (CH 76)
477.3375 (CH 77)
477.3625 (CH 78)
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
476.9375 (RX only)
476.9625 (RX only)
476.9875 (RX only)
477.0125
477.0375
477.0625
477.0875
477.1125
477.1375
477.1625
477.1875
477.2125
477.2375
477.2625
477.2875
477.3125
477.3375
477.3625
477.3875
477.4125
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
UNIDEN UH076DLX UHF CB Transceiver
IMPORTANT: Satisfactory evidence of the original purchase is required
for warranty service
Please refer to our Uniden website for any details or warranty durations offered
in addition to those contained below.
Warrantor: The warrantor is either Uniden Australia Pty Limited ABN 58 001
865 498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the
case may be.
Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser
only that the UH076DLX (“the Product”), will be free from defects in materials
and craftsmanship for the duration of the warranty period, subject to the
limitations and exclusions set out below.
Warranty period: This warranty to the original retail purchaser is only valid in
the original country of purchase for a Product first purchased either in Australia
or New Zealand.
Product
3 Years
Battery Pack &
Accessories
1 Year
If a warranty claim is made, this warranty will not apply if the Product is found
by Uniden to be:
(A) Damaged or not maintained in a reasonable manner or as recommended
in the relevant Uniden Owner’s Manual;
(B) Modified, altered or used as part of any conversion kits, subassemblies or
any configurations not sold by Uniden Aust or Uniden NZ;
(C) Improperly installed contrary to instructions contained in the relevant
Owner’s Manual
(D) Repaired by someone other than an authorized Uniden Repair Agent
in relation to a defect or malfunction covered by this warranty; or
(E) Used in conjunction with any equipment, parts or a system not
manufactured by Uniden.
Parts Covered: This warranty covers the Product and included accessories.
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
User-generated Data: This warranty does not cover any claimed loss of
or damage to user-generated data (including but without limitation phone
numbers, addresses and images) that may be stored on your Product.
Statement of Remedy: If the Product is found not to conform to this warranty
as stated above, the Warrantor, at its discretion, will either repair the defect or
replace the Product without any charge for parts or service. This warranty does
not include any reimbursement or payment of any consequential damages
claimed to arise from a Product’s failure to comply with the warranty.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
This warranty is in addition to and sits alongside your rights under either the
COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER
GUARANTEES ACT (New Zealand) as the case may be, none of which can be
excluded.
Procedure for obtaining warranty service: Depending on the country in
which the Product was first purchased, if you believe that your Product does
not conform with this warranty, you should deliver the Product, together with
satisfactory evidence of your original purchase (such as a legible copy of the
sales docket) to Uniden at the addresses shown below. You should contact
Uniden regarding any compensation that may be payable for your expenses
incurred in making a warranty claim. Prior to delivery, we recommend that you
make a backup copy of any phone numbers, images or other data stored on
your Product, in case it is lost or damaged during warranty service.
UNIDEN AUSTRALIA PTY LTD
Service Division
UNIDEN NEW ZEALAND LTD
Service Division
345 Princes Highway,
Rockdale, NSW 2216
150 Harris Road, East Tamaki
Auckland 2013
Phone: 1300 366 895
Email: [email protected]
Phone: (09) 273 8377
Email: [email protected]
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
THANK YOU FOR BUYING A UNIDEN PRODUCT.
© 2014 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in Vietnam.
U01UT961AZZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
|