TRAX436
In-Car Navigation
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Returning to normal navigation
Selected location (Cursor)
Original position in the Cursor menu
Daytime and night colour schemes
Colour scheme in tunnels
Route calculation and recalculation
Itinerary
35
36
36
37
37
37
38
39
40
40
41
41
41
41
41
42
43
44
45
Track Logs
Route demonstration
POI(Points of Interest)
Saving POI
Managing POI
Road Safety Cameras
Saving Road Safety Cameras
Camera warning
Camera types
Camera directions
Speed limit warning
TMC (Traffic Messaging Channel)
3: Navigating with TRAX436
45
46
46
47
47
49
51
53
54
55
57
57
58
59
60
Selecting the destination of a route
Selecting the Cursor as the destination
Entering an address or part of an address
Entering an address (Australia)
Entering an address if house numbering is restarted
Entering an address without knowing the district/suburb
Selecting an intersection as the destination
Selecting a city centre as the destination
Entering an address with a postal code
Tips on entering addresses quickly
Selecting addresses from your Favourites
Selecting the destination from the POIs
Selecting the destination with a saved POI search criteria
Selecting the destination from History
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the destination by entering its coordinate
Creating a multi-point route (inserting a via point)
Creating a multi-point route (appending a new destination)
Editing the route
60
61
62
63
64
64
65
65
65
66
66
66
67
67
67
68
View the whole route on the map (Fit-to-Screen)
Watching the simulation of the route
Enabling Safety Mode
Pausing the active route
Deleting the next via point from the route
Deleting the active route
Using Track Logs
Recording the travelled path (creating a Track Log)
Simulating a Track Log on the map
Changing the colour of a Track Log
Saving a route
Loading a saved route
4: Reference book (Advanced mode)
Map screen
69
69
73
73
75
76
78
78
78
78
80
81
83
84
86
89
89
91
Icons on the map
Battery, GPS position quality and Vehicle type indicator
Status indicator strip
Next two route events (Turn Preview fields)
Objects on the map
Streets and roads
3D object types
Elements of the active route
Detour menu
Cursor menu
Position menu
Route information screen
Trip information screen
Trip computer screen
Quick menu
GPS data screen
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Find menu
93
94
Route menu
Manage menu
95
Manage saved route
Manage History
95
96
Manage Track Logs
Manage Favourites
Manage POIs
96
97
98
Managed Saved Search Criteria
User Data management
Settings Menu
100
100
101
103
104
105
107
109
110
112
112
113
113
114
Map Screen settings
Sound settings
Route Planning options
Regional settings
Navigation settings
Warning settings
GPS settings
TMC settings
Menu settings
Device settings
Track Log settings
5: Bluetooth
116
126
130
6: Glossary
Warranty
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
What Do I Do First?
Make Sure These Items Arrived in the Box
If anything listed here is missing or damaged, contact your place of
purchase immediately.
Power button
GPS antenna
TRAX436 GPS
n A v iG A T io n d e v ic e
► Press the power
button momentarily to
turn the screen off (or
back on); the device
stays on and can still give
directions.
USB Port for PC
connection
► Press the power button
in and hold it for three
seconds to turn the
device completely off.
Power
connection
Win d S h ie l d m o u n T
► If you do put the
device on your
windshield, don’t
forget to lock it up
or take it with you
when you leave
your car.
Bracket
Bracket
lock
Suction
latch
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
What Do I Do First?
in c l u d e d A c c e S S o R ie S
DC (car)
adapter
USB cable
Adhesive
anchor disk
Plug it in
► Connect the power adapter to the
power connector on the lower right side of the device.
► Plug the other end into your car’s cigarette lighter (or any standard
12 V DC outlet).
► Only use the power adapter that came with your device. Any other
adapter might damage the device.
► Whenever it senses power coming in, the device turns itself on and
charges the battery.
► As soon as the power stops (for example, when
you unplug the adapter or turn off your car), the
device automatically shuts down. If you want it to
stay on, tap anywhere on the screen during the
Shutting down message.
►
You can turn the device on or off
anytime you want: just push
the power button on top of
the device (hold the button
for three seconds to turn the
device off). See Hardware
button (Power on/off) p19.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Put It in My Car?
Safety considerations
► Don’t install any device where it will block your view (including your
mirrors!) while you’re driving.
► Keep your attention on the road! Don’t try to operate or focus
on any device while you’re driving. If you have to concentrate on a
device, pull off the road for a few minutes.
► It’s a good idea to take valuable items with you when you leave you
car—that includes GPS devices. If you can’t take the device with
you, lock it in the glove compartment or hide it somewhere. And don’t
forget to take down the windshield mount: you don’t want to remind
any potential thieves that you might have some valuable mobile
electronics in the car.
Don’t leave the device in direct sunlight for a long period of time or
where the temperature could go above 60º C (140º F).
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Put It in My Car?
Attaching the windshield mount
Rotate the
2
bracket up so
the head ꢀts
into the gap.
Insert the bracket hook
into the notch at the
bottom of the device.
1
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Put It in My Car?
Ad j u S T in G T h e W in d S h ie l d m o u n T
Lift the adjustment lock
to move the suction cup
and bracket
The bracket
pivots in all
directions
► The adjustment lock keeps both the bracket and the suction cup
locked into place. Lift the adjustment lock to change the position of the
device.
► The suction cup joint pivots front to back, and the bracket joint pivots
up, down, right and left, any just about angle in between.
► Angle the suction cup and the bracket where you want them, then
push the adjustment lock back down to lock the windshield mount into
position.
► If the bracket still moves too easily after you push the adjustment lock
down, tighten the bracket joint (lift the adjustment lock, and twist the
lock handle clockwise two, maybe three turns).
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Put It in My Car?
Mounting on the windshield
Make sure the device does not block your view of the road or
your mirrors.
Once you decide where you want the device, hold the suction cup in that
position, then adjust the mount so you have the best view of the device.
1) Press the suction cup flat against the windshield.
2) Push the suction lock up
(towards the suction cup)
until it snaps into place.
3) Gently pull on the mount to
make sure it is secure.
If you have trouble getting the
suction cup to stick:
► Clean the spot with an
ammonia-free cleanser.
Flip the suction
► Dry the spot completely (use
latch up to lock
a lint-free cloth, if possible).
the windshield
mount into place.
► Make sure the spot is smooth
and flat (suction cups won’t
stick well on a curved or textured surface).
Re m o v in G T h e W in d S h ie l d m o u n T
When you release the suction latch, make sure you’re holding or
somehow supporting the device.
Lift the suction latch and use the plastic pull tab to pull the suction cup off
of the glass.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Put It in My Car?
Mounting on a flat surface
If you want to put the device somewhere other than your windshield (or
anywhere the suction cup won’t stick), you can use the anchor disk. Once
you glue the anchor disk down, the windshield mount installs inside the
disk just like it does on glass.
When you’re deciding where to put the anchor disk, here are some things
to keep in mind:
► The surface should be as flat as possible. If the disk is upside down
or at a sharp angle, it might not hold the device’s weight.
► The surface should be as smooth as possible. If the surface texture
is too rough, the glue may not stick as well.
► The anchor disk will stick permanently on most surfaces. If you
try to remove the disk, you might damage the surface.
► Don’t peel off the protective sheet until you’re ready to install the disk.
Once you expose the glue, you can’t stop easily.
1) When you decide where you want to mount the disk, hold the suction
cup in that spot and set the angle and position of the bracket (just like
you would for mounting on your windshield).
2) Clean the spot to remove any wax, grease, protecterants, etc.
3) Carefully peel the protective sheet
from the bottom of the anchor disk to
expose the glue.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Put It in My Car?
4) Hold the disk exactly above the spot where you want to glue it down.
(Remember, the glue is designed to be permanent!)
5) Press the disk firmly against the surface. Push down along the
edges, too, so that every part of the disk makes good contact with the
surface.
6) Before you install the windshield mount, gently tug on the disk to make
sure it’s secure.
7) Press the suction cup flat against the anchor disk, then push the
suction latch down (towards the suction cup) to lock it into place.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
1: Warnings and Safety information
TRAX436 is a navigation system that helps you find your way to your
destination with a connected GPS receiver. TRAX436 does not transmit
your GPS position; others cannot track you.
It is important that you look at the display only when it is safe to do so.
If you are the driver of the vehicle, we recommend that you operate
TRAX436 before you start your journey. Plan the route before your
departure and stop if you need to change something in the route.
TRAX436 has a Safety Mode: if you turn on Safety Mode, you cannot
change anything in TRAX436 while the vehicle is moving at a speed of 10
km/h (6 mph) or higher. Unless only passengers operate TRAX436, we
strongly encourage you to turn on Safety Mode.
You must obey the traffic signs and follow the road geometry. If you
deviate from the route that TRAX436 recommended, TRAX436 changes
the instructions accordingly.
Never place mobile devices where it obstructs the driver’s view, where it is
in the deployment zone of an airbag or where it might cause injuries in an
accident.
2: Getting started with TRAX436
TRAX436 is optimised for in-car use. Tap the screen buttons and the map
with your fingertips.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Tasks
Instructions
Double tapping You do not need to tap the screen twice for any action.
the screen
With buttons and controls, a single tap is enough.
Tapping and
holding the
screen
You do not need this to access the basic navigation
functions. Tap and keep pressing the following buttons
to reach extra functions:
• Tap and hold
on the Map screen: you can
set the minimum and maximum zoom level of Smart
Zoom.
• Tap and hold any of the
buttons on the Map screen: you can set or reset the
zoom value of the button (2D map).
• Tap and hold any of the
buttons on the Map screen: you can set or reset the tilt
and zoom values of the button (3D map).
• Tap and hold
on list and menu screens:
the Navigation menu appears.
• Tap and hold any of the
buttons on the Map screen: you can rotate, tilt or
scale the map continuously.
• Tap and hold
on keyboard screens: you
can delete several characters quickly.
• Tap and hold
or
in long lists: you can turn
the page continuously.
• Tap and hold the buttons in the Quick menu to open
screens from the Manage menu or the Settings menu
related with the function of the button.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Gestures
(drag&drop)
You do not need gestures to access the basic
navigation features. You need to drag and drop the
screen only in cases like:
Moving the handle on a slider.
Moving the map: grab the map, and move it in the
desired direction.
Shortcut to open the Map screen: slide your finger
from the bottom right corner to the bottom left corner
on any screen.
Shortcut to open the Navigation menu: slide your
finger from the top left corner to the bottom left corner
on any screen.
Start using TRAX436
When TRAX436 is started the first time, you need to do the following:
1. Select the written language of the application.
2. Select the language and speaker used for voice guidance
messages.
IMPORTANT! - To use the Spoken Street Names feature you
must choose a guidance language which is enabled for Text To
Speech. These are indicated with (TTS).
NOTE
3. Select whether to start the program in Simple mode or in
Advanced mode. Later you can change the language or switch
between the two operating modes in Settings (page 101).
After this, the Navigation menu appears and you can start using TRAX436.
The Navigation menu in
Simple mode:
The Navigation menu in
Advanced mode:
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
The typical way of using TRAX436 is to select a destination, and start
navigating. You can select your destination in the following ways (not all of
them are available in Simple mode):
•
•
Use the selected location on the map (the Cursor) (page 36).
Enter a full address or a part of an address, for example a street
name without a house number or the names of two intersecting
streets (page 47).
•
Enter an address with postal code (page 55). This way you do
not need to select the name of the settlement and the search for
street names might be faster as well.
•
•
Use a coordinate (page 60)
Use a saved location:
•
•
•
a Favourite (page 57)
a POI (page 58)
the History of previously set destinations and waypoints (page 60)
Simple and Advanced modes
The two operating modes of TRAX436 mainly differ in the menu structure
and the number of available features. The controls and screen layouts are
the same.
•
Simple mode: you have easy access to the most important
navigation functions and the basic settings only. The rest of the
settings are set to values that are optimal for typical use.
•
Advanced mode: you have access to the full functionality of
TRAX436.
To switch from Simple mode to Advanced mode: on the startup screen
(Navigation Menu), tap
,
.
To switch from Advanced mode to Simple mode: on the startup screen
(Navigation Menu), tap
,
.
The features and settings available in each mode are as follows:
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Type of action
Available
in Simple
mode
Available in Explanation
Advanced
mode
Navigating to a selected
map point
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
See page 46
See page 47
See page 47
See page 53
See page 60
Navigating to a street
address
Navigating to an
incomplete address
Navigating to an
intersection
Navigating to recent
destinations (History)
Navigating to Favourites
Navigating to a POI
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
See page 57
See page 58
See page 60
See page 61
See page 81
Navigating to coordinates
Creating a multi-point route No
Saving a map point as a
Favourite destination
Yes
Saving a map point as a POI No
Yes
Yes
See page 81
See page 81
Saving a map point as a
location of a Road Safety
Camera
No
Mark a map point with a
Pin
No
Yes
See page 81
Saving the active route
Saving Track Logs
No
No
No
Yes
Yes
Yes
See page 67
See page 66
Map Screen settings
See page
103
Menu settings
Sound settings
Only
background
picture
Yes
See page
113
Only Master Yes
volume
See page
104
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Route Planning options
Regional settings
Yes
Yes
Yes
See page
105
Only
language
selection
See page
107
Warnings
No
Yes
See page
110
Hardware button (Power on/off)
You can use TRAX436 mostly by tapping the touch screen. The device
has only one hardware button for turning power on or off.
When the device is on, pressing the power button momentarily turns the
LCD screen off (the green LED stays on and the device continues to
operate) or on. Press and hold the power button to turn the device off.
You can turn the devices on or off at any time. When the device is
switched off, TRAX436 does not calculate your GPS position and it does
not update the route or the driving instructions.
When you turn the device on again, TRAX436 continues navigating as
soon as the GPS receiver has determined your position.
Buttons and other controls on the screen
When you are using TRAX436, you usually tap buttons on the touch
screen.
You only need to confirm selections or changes in TRAX436 if the
application needs to restart, it needs to perform a major reconfiguration, or
you are about to lose some of your data or settings. Otherwise, TRAX436
saves your selections and applies the new settings without confirmation as
soon as you use the controls.
Type
Example
Description
How to use it
Button
Tap it to initiate
a function, to
open a new
Tap it once.
screen, or to set
a parameter.
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Icon
Shows status
information.
Some icons also
function as a
button. Tap them
once.
List
When you need
to select from
several options,
they appear in
a list.
Turn the page
with the
and
buttons and
tap the value that
you want.
Slider
When a feature
has several
different
• Drag the handle
to move the
slider to its new
unnamed values, position.
TRAX436 shows
• Tap the slider
an indicator on
a gauge that
displays and sets
a value from a
range.
where you want
the handle to
appear; the
thumb jumps
there.
Switch
When there are
Tap it to turn the
only two choices, switch on or off.
a checkmark
shows whether
the feature is
enabled.
Virtual
keyboard
Alphabetic and
alphanumeric
keyboards to
enter text and
numbers.
Each key is a
touch screen
button.
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Using keyboards
You only need to enter letters or numbers in TRAX436 when you cannot
avoid it. You can type with your fingertips on the full-screen keyboards
and you can switch between various keyboard layouts, for example ABC,
QWERTY, or numerical.
Task
Details
Switching to another keyboard
layout, for example from a Latin
QWERTY keyboard to a Greek
keyboard
Tap
, and select from
the list of available keyboard types.
TRAX436 remembers your last
keyboard choice and offers it the
next time you need to enter data.
Correcting your entry on the
keyboard
Remove the unneeded character(s):
tap
. Tap and hold the
button to delete the entire input
string.
Entering a space, for example
between a first name and a
family name or in multi-word
street names
Tap
.
Entering small or capital letters
Tap
to cycle through entering
lower case letters, capital initials or
all capitals.
Entering symbols
Tap
to switch to a keyboard of
symbol characters.
Finalising the keyboard entry
Tap
.
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Using the map
The map screen is the most frequently used screen of TRAX436. It can be
accessed from the Navigation menu by tapping
.
For further information about the map screen, see page 69.
Checking the details of a map location
•
If you are interested in the details of your current position during
navigation:
1. Check the bottom line of the map. It shows the current street
and house number information.
2. For further details, tap
to open the Position menu.
3. Tap
. The address, the coordinate and the list of
nearby POIs will be displayed.
•
You can check the details of any other location by selecting it on
the map:
1. Tap the map anywhere to open the map control buttons.
2. Tap the desired location on the map. The Cursor (
there. The address of the location is displayed at the bottom of
the map.
) appears
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
3. For further details, tap
to open the Cursor menu.
4. Tap
. The address, the coordinate and the list of
nearby POIs will be displayed.
•
It is even easier if you select the desired point in the Find menu.
Then the Cursor menu opens automatically. You only need to
tap the button.
Manipulating the map
Position markers on the map:
•
•
Current GPS position:
(page 35)
(page 36)
Selected location (Cursor):
The following controls help you modify the map view to best suit your
actual needs. Most of these controls appear only if you tap the map once,
and disappear after a few seconds of inactivity.
Action
Button(s)
Description
Moving the
map with
drag&drop
No buttons
You can move the map into any
direction: tap and hold the map, and
move your finger to the direction in
which you want to move the map.
If GPS position is available and you
have moved the map, the
button appears. Tap this button to
return to the GPS position.
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Opening/
closing
Tap this button to show or hide the
following map control buttons:
map control
buttons
• Zoom in/out
• Rotate left/right (3D map only)
• Tilt up/down (3D map only)
• Zoom preset buttons (2D map only)
• Tilt and zoom preset buttons (3D
map only)
• Return to GPS position button
• Smart Zoom button
Zooming in
and out
Changes how much of the map is
displayed on the screen.
TRAX436 uses high-quality vector
maps that let you see the map at
various zoom levels, always with
optimised content. It always displays
street names and other text with the
same font size, never upside-down,
and you only see the streets and
objects that you need.
Map scaling has different limits in 2D
and in 3D map view modes.
Tilting up
and down
Changes the vertical view angle of
the map in 3D mode.
Page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Rotating left
and right
Changes the horizontal view angle of
the map in 3D mode.
When GPS position is available,
TRAX436 always rotates the map so
its top faces your direction of travel
(Track-U p orientation). You can
turn away from Track-Up with these
buttons.
If GPS position is available and you
have rotated the map, the
button appears. Tap this button to re-
enable the automatic map rotation.
Viewing
modes
Gives you the following map
perspectives in TRAX436:
• classic top-down view (2D)
• perspective view (3D)
The value always shows the mode
the button switches to: If you are in
2D mode, you can see the
button and you need to tap it to
switch to 3D mode.
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Smart Zoom
TRAX436 can automatically rotate,
scale and tilt the map and give you
the optimal view:
• When you are approaching a turn,
TRAX436 zooms in and raises
the view angle to let you easily
recognise your manoeuvre at the
next junction.
• If the next turn is at a distance,
TRAX436 zooms out and lowers the
view angle to show you the road in
front of you.
Tap this button once to enable Smart
Zoom.
Tap&hold the button to set the zoom
limits of Smart Zoom.
Returning
to normal
navigation
(back to
the GPS
position with
automatic
map
Tap this button to move the map
back to the current GPS position.
If the map has been rotated in 3D
mode, automatic map rotation is also
re-enabled.
rotation)
Zoom preset
buttons
(available in
Advanced
mode only)
Tap one of the preset buttons to set
the zoom level to a fix, predefined
value. Smart Zoom is disabled.
These buttons are available in 2D
mode.
Tap&hold any of the buttons to set its
value to the current zoom level, or to
reset it to its original value.
Page 26
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Tilt and
Tap one of the preset buttons to
zoom preset
buttons
(available in
Advanced
mode only)
set the tilt and zoom levels to fix,
predefined values. Smart Zoom
is disabled. These buttons are
available in 3D mode.
Tap&hold any of the buttons to set
its value to the current tilt and zoom
levels, or to reset it to its original
value.
Map scale
TRAX436 shows the scale of the
map in 2D mode.
Fit-to-screen
This button does not appear on the
Map screen. It is available on the
following screens:
Plan on Map screen: When you have
an active route, you can display it in
its full length on the map.
Track Information screen: A track log
can be displayed in its full length on
the map.
Status information and hidden
controls on the map
The following information appears in the rounded field in the top left
corner, the Turn Preview field. When tapping this area, the result depends
on the information currently shown.
Icon
Information
Details
Action
There is no
active route in
Simple mode
If there is no route to
Tap this area
to open Find
Address.
be navigated in Simple
mode, this icon appears
in the Turn Preview field.
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
There is no
active route in
If there is no route to be
navigated in Advanced
Tap this area to
open Find.
Advanced mode mode, this icon appears
in the Turn Preview field.
There is no valid If an active route exists,
Tap this area to
GPS position.
and there is no valid GPS open the Route
position, the view of the
sky above you is shown
with coloured dots for
each satellite. Some dots
need to turn green to be
able to navigate.
Information
screen.
If the icon is a
static picture,
GPS position and an
active route are available, make TRAX436
Tap this area to
route calculation but automatic off-route
recalculate the
recommended
is needed
recalculation is switched
off, and you deviated from route.
the route.
If the icon is
TRAX436 is calculating
Nothing
animated, route or recalculating the route. happens if you
calculation is in
progress
tap this area of
the screen.
Next route
event (next
manoeuvre)
GPS position and an
active route are available, open the Route
Tap this area to
and you navigate the
recommended route.
This area gives you
information about the
type and distance of the
next route event.
Information
screen.
The following area appears next to the above described rounded area.
When tapping this area, the result depends on the information currently
shown.
Page 28
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Icon
Information
Details
Action
There is no valid If there is no valid GPS
Tap this area to
open the GPS
Data screen
to check the
signal status or
the connection
settings.
GPS position
position, this symbol
appears here.
Traffic restriction When GPS position is
Nothing
available, but there is no
happens if you
route to be navigated, the tap this area of
traffic restriction of the
upcoming intersection
is shown here if there is
any.
the screen.
Second
When GPS position
Tap this area
to open the
Itinerary screen
with the turn by
route event
(manoeuvre
after the next
manoeuvre)
and an active route are
both available, this field
shows the route event
that follows the next route turn guidance
event shown in the above instructions.
described area.
Approaching
a Road Safety
Camera
This icon appears when
you are approaching a
Road Safety Camera, and audible camera
Tap this area to
suppress the
the warning for cameras
is enabled in Settings.
warning.
Stops the
running
simulation
This icon appears during Tap this area
Route Fly Over, Route
Simulation, and Track
Log playback.
to stop the
simulation.
Route
During route
Nothing
recalculation
progress
recalculation, this field
shows the recalculation
progress between 0%
and 100%.
happens if you
tap this area of
the screen.
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Indicator strip
Nothing
happens if you
tap this area of
the screen.
- sounds muted/
- Track Log
enabled
recording
- TMC status
- Bluetooth status
The following symbols appear in the Indicator strip:
Icon
Description
The sound output of TRAX436 is muted.
The sound output of TRAX436 is enabled.
TRAX436 records a Track log when GPS position is available.
Track log recording is disabled.
No TMC receiver is connected or TMC is turned off.
TMC receiver is connected and a radio station with TMC
broadcast is received.
Page 30
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
There are new, unread TMC events.
A part of the route is bypassed based on TMC events.
A part of the route is mentioned in TMC events but could not
be bypassed (for example, the destination is on a congested
street).
The Bluetooth radio is switched off.
The Bluetooth radio is turned on, but no telephone is
connected.
There is an error in the Bluetooth connection.
TRAX436 is connected to a telephone as a handsfree set via
Bluetooth.
A phone call is in progress over the Bluetooth connection.
The following information can be seen in the three data fields shown on
the map screen. Tap this area to open the Trip Information screen where
you can select which values to be shown in these three fields.
When there is no active route, these fields show the following information:
current speed, compass and the current time of day.
Icon
Type
More Information
Compass
Shows the direction of your heading
both when the map is automatically
rotated (3D) and when the map is
always facing North (2D).
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Speed
information
There are speed values that can be
shown:
• Current speed
• Speed limit on the current road
Time
information
There are time values that can be
shown:
• Current GPS time
• Time remaining to reach the
destination
• Time remaining to reach the
next via point
• Estimated arrival time at the
destination
• Estimated arrival time at the next via
point
Distance
information
There are distance type values that can
be shown:
• Distance remaining to reach the
destination
• Distance remaining to reach the next
via point
• Current altitude
The next area is a combined status field. Tap this area to open the Quick
menu (page 89).
Icon
Status for
More Information
GPS position
quality
The more lit bars, the better is the GPS
position.
Battery status
The device is running on battery power.
The number of lit bars represent the
remaining capacity.
The battery is
being charged
The device is running on external power.
The battery is being charged.
Page 32
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Vehicle type
The symbol displays the vehicle type
used for route calculation.
Using the Cursor (the selected map location)
First, place the Cursor at the desired map location with one of the following
options:
•
•
Use the Find menu to select a location. The map returns with
the selected point (the Cursor) in the middle, and the Cursor
menu appears with the available options.
Tap the screen and tap again to place the Cursor at the desired
location. Now tap
to open the Cursor menu.
You can perform the following actions:
Button
Action
In the active route, uses the Cursor as the start point
by replacing the current GPS position (available in
Advanced mode only)
In the active route, uses the Cursor as the destination
by replacing the previous destination
In the active route, uses the Cursor as a via point (an
intermediate destination) preceding the destination
(available in Advanced mode only)
In the active route, uses the Cursor as the destination
while keeping the previous destination as a via point
(available in Advanced mode only)
Shows the different routes calculated by the available
routing methods. Choose the one that suits your
needs the best.(available in Advanced mode only)
Saves the Cursor as a POI(available in Advanced
mode only)
Saves the Cursor as a Favourite location
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Saves the Cursor as a Road Safety Camera location
(available in Advanced mode only)
Marks the map with a Pin at the Cursor (available in
Advanced mode only)
Opens a screen with the name, address and
coordinate information of the Cursor, and the list of
POIs near it
TRAX436 Concepts
Smart Zoom
Smart Zoom is a lot more than just a usual automatic zoom:
•
While following a route calculated by TRAX436: when
approaching a turn, it will zoom in and raise the view angle to
let you easily recognise your manoeuvre at the next junction.
If the next turn is at a distance, it will zoom out and lower the
view angle to be flat so you can see the road in front of you.
•
While driving without an active route in TRAX436: Smart
Zoom will zoom in if you drive slowly and zoom out to the limit
set here when you drive at high speed.
Enabling Smart Zoom
Tap the map to let the map control buttons appear, and then tap
enable Smart Zoom.
to
Fine-tuning Smart Zoom
Tap the map to let the map control buttons appear, and then tap and hold
to open the Smart Zoom Settings window. Modify the zoom limits of
Smart Zoom if necessary.
Page 34
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Position markers
Current GPS position and Lock-on-Road
When your GPS position is available, TRAX436 marks your current
position with the
icon on the map. The exact location of the position
marker depends on the vehicle type used for route calculation.
The vehicle type can be selected in Route settings (page 94) or in the
Quick Menu (page 89).
•
If you choose pedestrian: The
icon is at your exact GPS position.
The direction of the icon shows your actual heading.
•
If you choose any of the vehicles: The
icon is aligned to the
nearest road to suppress GPS position errors. The direction of the icon is
one of the directions of the route.
To use the current GPS position, tap
. The Position menu appears
and you can save the GPS position as one of the following:
•
•
•
•
a Favourite
a Road Safety Camera
a POI
a map marker Pin
Return to normal navigation
When GPS position is available, and you have moved the map (the
icon is moving or is not even visible), or you have rotated the map in 3D
mode, the
button appears. Tap it to move the map back to the GPS
position and re-enable Track-up map orientation (automatic map rotation).
Even if you move the map while you are driving,
TRAX436 continues navigating if there is an active route:
it plays the voice instructions and displays the turn
NOTE
preview icons according to your current GPS position.
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map
control buttons are visible, the Cursor appears at the selected point on the
map. TRAX436 displays the Cursor with a radiating red dot (
) to make
it visible at all zoom levels, even when it is in the background of a 3D map
view.
When the Cursor is set, tap
. The Cursor menu appears and you
can use the Cursor as one of the following:
•
•
•
the start point of a route
a via point in a route
the destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
•
•
•
•
a Favourite
a Road Safety Camera
a POI
a map marker Pin
Original position in the Cursor menu
When the Cursor menu is open, a special icon (
position the menu was opened with.
) shows the Cursor
You can move and zoom the map, and you can set the Cursor to a
different place. The usual Cursor (
) appears, and the buttons of the
Cursor menu initiate actions for this new location.
To return to the original Cursor position, tap
. The map jumps back to
the position with which the Cursor menu was opened, and the
appears again.
icon
Page 36
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Daytime and night colour schemes
TRAX436 uses different colour schemes during the day and during the
night.
•
•
Daytime colours are similar to paper road maps.
The night colour schemes use dark colours for large objects to
keep the average brightness of the screen low.
TRAX436 offers different daytime and night colour schemes. It can also
switch automatically between the daytime and the night scheme based
on the current time and GPS position a few minutes before sunrise, when
the sky has already turned bright, and a few minutes after sunset, before it
becomes dark.
Colour scheme in tunnels
When entering a tunnel, the colours of the map change. All buildings
disappear, the large objects (such as surface waters or forests) and the
empty areas between roads become black.
However roads and streets keep their original colours from the daytime or
night colour scheme currently used.
After leaving the tunnel, the original colours return.
Route calculation and recalculation
TRAX436 calculates the route based on your preferences:
•
Route calculation method:
•
•
•
•
Fast
Short
Economical
Easy
•
Vehicle types :
•
•
•
•
•
Car
Taxi
Bus
Emergency vehicles
Bicycle
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
•
Pedestrian
•
Road types:
•
•
•
•
•
•
•
Unpaved Roads
Permit Needed
Motorways
Toll Roads
Charge Roads
Ferries
Cross-border Planning
TRAX436 automatically recalculates the route if you deviate from the
proposed itinerary.
Depending on the type of the TMC event, TRAX436 also recalculates the
route if a TMC event concerns a part of the recommended route.
For further information about Route Planning options, see page 104.
Itinerary
The Itinerary is the list of the route events, that is, the driving instructions.
When you are on the Map screen, you can display the Itinerary in one of
the following ways:
•
Tap the area between the Turn preview and the Travel data
fields where the symbol of the second next manoeuvre is
displayed (for example
).
•
In Advanced mode, tap the following buttons:
,
,
.
Page 38
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
You have the following options on the Itinerary screen:
Button
Description
Any of the list items
Opens the map with the selected manoeuvre in
the middle.
Changes the detail level of the Itinerary. The
levels are as follows:
• Detailed Instructions: all intersections are listed
• Itinerary: only significant intersections (the
ones announced in voice guidance) are listed
• Road list: the list of the roads used while
navigating the route
Turns the page for additional list items.
,
When the map is open with a manoeuvre in the middle:
Button
Description
Zooms in the map.
Zooms out the map.
Moves the map to show the previous or next
manoeuvre.
,
Opens a screen where you can avoid a part of
the route starting from the selected manoeuvre.
Track Logs
TRAX436 can log the track that you drive (page 66).
A Track Log is a recording of how your GPS position changed and it is
independent of the route TRAX436 calculated.
Track Logs can be recorded, renamed, replayed, shown on the map,
exported to a the internal Flash ROM in GPX format, and deleted. See
page 66.
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Independently of the normal track log, you can instruct TRAX436 to record
the native GPS data received from the GPS device. These logs are saved
as separate text files on the internal Flash ROM, and they cannot be
shown or replayed in TRAX436.
To turn on NMEA/SIRF log saving, tap the following buttons:
,
,
,
.
Route demonstration
A simulation drives you through the route, following the driving instructions
(page 64). You can choose from a simulation at high speed or at normal
driving speed.
You can use it, for example, to see which bridge TRAX436 planned for the
route; if you do not want to take that bridge, you can avoid it.
Route demonstrations can be started from the Route menu by tapping the
(high speed simulation) or the
normal speed) button.
(simulation at
POI (Points of Interest)
A point of interest (POI) is a location that someone might find useful or
interesting. TRAX436 is delivered with thousands of POIs and you can
also create your own POIs in the application.
POI locations are marked on the map with special icons. POI icons are
quite large so you can easily recognise the symbol. The icons are also
semi-transparent: they do not cover the streets and intersections behind
them.
POIs are grouped into several levels of categories and subcategories.
The icon of a POI that comes with the map shows the symbol of the
POI category. If you save your own POI, you can select an icon for it
independently of the POI category you have put it in.
Page 40
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Saving POI
To save a POI, place the Cursor (
following buttons:
) at the desired location, then tap the
,
,
.
Managing POI
You can select which POI groups to show and which ones to hide on the
map, and from which zoom levels POI icons are visible. At the same place
you can manage your saved POIs. A saved POI can be renamed, moved
to a different POI group, its icon can be changed, or a phone number and
additional information can be added to it. Tap the following buttons:
,
,
.
Road Safety Cameras
The location of a Road Safety Camera is a special POI. They cannot be
searched like other POIs, and there is a special proximity warning only
for cameras. You can save the Cursor as the location of a Road Safety
Camera.
Saving Road Safety Cameras
To save the location of a Road Safety Camera, place the Cursor
(
) at the desired location, then tap the following buttons:
,
,
.
Camera warning
The warning for Road Safety Cameras can be turned on in Warning
Settings. Tap the following buttons:
.
,
,
,
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
When you approach a Road Safety Camera with the warning enabled, the
following happens:
•
Visible Warning: The type of the camera is displayed in the secondary
Turn Preview field (for example
).
•
Audible Warning: If there is no speed limit given for the camera, or your
speed is under the given speed limit, single beeps warn you about the
camera.
•
If you exceed the speed limit of the camera, the following also
happens:
•
Visible Warning: A symbol with the speed limit appears in the corner of
the map (for example:
),
•
Audible Warning: A special alert sound is played.
Camera types
There are different types of Road Safety Cameras.
Symbol Type
Description
Fixed
Some speed cameras stand by the roadside,
looking in one direction, measuring one or both
directions of the traffic. They measure your current
speed. For these speed cameras you can specify
the controlled traffic direction and the speed limit.
TRAX436 warns you when you approach these
speed cameras in the measured direction. If your
speed exceeds the speed limit near the speed
camera, TRAX436 plays a special warning sound.
Mobile
Some speed cameras are operated from vehicles.
They do not always work and they are not set to
check a preset speed limit. The warning is similar
to fixed speed cameras, but as there is no speed
limit given, only the proximity is announced.
Page 42
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Built-in
Some speed cameras are built into traffic lights.
They work like fixed speed cameras, but they
are difficult to spot. The warning for proximity
and speeding is the same as for the fixed speed
cameras.
Section These speed cameras work in pairs, and do not
control
measure your current speed but your average
speed between the two speed cameras. Both
identify your car and record the exact time you
pass them. They use the difference between
the two points in time to calculate your average
speed.
TRAX436 warns you when you approach one of
these speed cameras, but as you pass by, the
warning stays on, and your average speed is
measured until you reach another speed camera
of this type. If your average speed exceeds the
speed limit between the two speed cameras, you
receive the same special warning sound as with
the other speed camera types.
In the rare case TRAX436 cannot register the
moment you pass the second speed camera (for
example, it is placed at the exit of a tunnel where
GPS position is not yet available) the warning
continues. Just tap the speed camera symbol
displayed on the screen to stop the warning.
Red
light
These cameras check if you obey traffic lights.
The warning is similar to mobile speed cameras:
as there is no speed limit given, only the proximity
is announced.
Camera directions
A speed camera can measure the speed of one direction of the traffic,
both directions, or even several directions in an intersection, when they
are mounted on a rotating base. The same directions apply to red light
cameras. TRAX436 warns you only if you drive in a measured or possibly
measured direction. The measured direction of the camera appears with
the following symbols:
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Symbol Description
The camera checks the speed of the direction into which you
are driving.
The camera checks the speed of the opposite driving
direction.
The camera checks the speed in both directions on the road.
The camera can check the speed in any direction.
Speed limit warning
Maps sometimes contain information about the speed limits of the road
segments. This information may not be available for your region (ask your
local dealer) or may not be fully correct for all roads on the map.
You can configure TRAX436 to warn you if you exceed the current limit.
Tap the following buttons:
,
,
,
.
When you exceed the speed limit, the following happens:
•
Visible Warning: A symbol with the speed limit appears in the
corner of the map (for example: ).
•
Audible Warning: A voice message is played using the selected
voice guidance profile.
Page 44
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
TMC (Traffic Message Channel)
TRAX436 can provide you with even better routes if Traffic Message
Channel (TMC) information is available. The TMC is a specific application
of the FM Radio Data System (RDS) used for broadcasting real-time traffic
and weather information.
The TMC feature is enabled by default in TRAX436. TMC requires
subscription to the service provided by a separate supplier. There is a fee
for this service.
TMC is not a global service. It may not be available in your
country or region. Ask your local dealer for coverage details.
NOTE
If public TMC data is broadcast at your location, TRAX436 automatically
takes into account the TMC data received. You do not need to set anything
in the program. The receiver will automatically search the FM radio
stations for TMC data, and the decoded information will immediately be
used in route planning. The moment TRAX436 receives traffic information
that may affect your route, the program will warn you that it is recalculating
the route, and navigation will continue with a new route that is optimal
considering the most up-to-date traffic conditions.
If necessary, you can change the settings related to TMC, or select a specific
radio station to receive. Tap the following buttons:
,
,
.
3: Navigating with TRAX436
You can set up your route in TRAX436 in several ways:
•
If you need a simple route (a route with only one destination,
without any intermediate via points), you can select the
destination and start navigating to it right away
•
•
you can plan a multi-point route (available in Advanced
mode only)
you can also plan a route independently of your current GPS
position or even without GPS reception (available in Advanced
mode only)
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Selecting the destination of a route
TRAX436 offers you several ways of choosing your destination and via
points (intermediate destinations):
•
•
Use the selected location on the map (the Cursor) (page 46).
Enter a full address or a part of an address, for example a street
name without a house number or the names of two intersecting
streets (page 47).
•
Enter an address with postal code (page 55). This way you do
not need to select the name of the settlement and the search for
street names might be faster as well.
•
•
Use a coordinate (page 60)
Use a saved location:
•
•
•
a Favourite (page 57)
a POI (page 58)
the History of previously set destinations and waypoints
(page 60)
If you are going to use a route later, save it before you start
navigating. Tap the following buttons:
TIP
,
,
.
Selecting the Cursor as the destination
1. Locate your destination on the map: move and scale the map
as needed (page 14).
2. Tap the location that you want to select as your destination. The
Cursor (
) appears.
3. Tap
to open the Cursor menu.
4. The map appears with the selected point in the middle. Tap
(Simple mode) or
Page 46
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
If you know that you will use a destination later, when the
Cursor menu appears, save it as a POI, or put it on the list
of your Favourites first. The Cursor menu returns
automatically with the same point. Now you can use it as a
route point.
TIP
Entering an address or part of an address
If you know at least a part of the address, it is the quickest way to select
the destination of the route.
Using the same screen, you can find an address by entering:
•
•
•
•
•
the exact address, including house number
the centre of a settlement
an intersection
the midpoint of a street
any of the above, starting the search with the postal code
(page 55)
Entering an address (Australia)
In some countries, the state is also used in addresses. If you are in one of
these countries, or choose any of them from the list of countries, five lines
appear on the screen:
The procedure is explained starting from the Navigation menu.
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
1. Tap the following buttons:
(Simple mode), or
,
(Advanced mode).
2. By default, TRAX436 proposes the country, state and settlement
where you are. If needed, tap the button with the name of the
country, and select a different one from the list. If you select a
new country, you also need to select the state, or tap
to search for a settlement regardless of the state it is in.
3. If you have not changed the country, you still have the
possibility to change the state. Tap the button with the name of
the state, and select from the list.
4. If needed, change the settlement:
•
To select the settlement from the list of recently used ones,
tap the button.
•
To enter a new settlement:
1. Tap the button with the name of the settlement, or if you
have changed the country/state, tap
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
.
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the settlement from the list.
5. Enter the street name:
1. Tap
.
2. Start entering the street name on the keyboard.
Page 48
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
3. Get to the list of results:
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the street from the list.
6. Enter the house number:
1. Tap
.
2. Enter the house number on the keyboard.
3. Tap
to finish entering the address.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Entering an address if house numbering is
restarted
There are long roads where the house numbering is restarted at some
point. This way the same house number can appear twice or even
more times on the same road. If this is the case, after giving the house
number, you need to select the appropriate address by the district/suburb
information.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
(Simple mode), or
,
2. By default, TRAX436 proposes the country/state and settlement
where you are. If needed, tap the button with the name of the
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
country/state, and select a different one from the list.
3. If needed, change the settlement:
To select the settlement from the list of recently used ones,
•
tap the
button.
•
To enter a new settlement:
1. Tap the button with the name of the settlement, or if you
have changed the country/state, tap
.
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the settlement from the list.
4. Enter the street name:
1. Tap
.
2. Start entering the street name on the keyboard.
3. Get to the list of results:
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the street from the list.
5. Enter the house number:
1. Tap
.
Page 50
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
2. Enter the house number on the keyboard.
3. Tap
to finish entering the address.
6. A list appears with the matching addresses. Tap the desired
one.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Entering an address without knowing the
district/suburb
Long roads can run across several districts or suburbs. You may not know
if a particular house number is in which of them. In this case, follow the
instructions below:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
(Simple mode), or
,
2. By default, TRAX436 proposes the country/state and settlement
where you are. If needed, tap the button with the name of the
country/state, and select a different one from the list.
3. If needed, change the settlement:
•
To select the settlement from the list of recently used ones,
tap the button.
•
To enter a new settlement:
1. Tap the button with the name of the settlement, or if you
have changed the country/state, tap
.
2. Start entering the settlement name on the keyboard.
Page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
3. Get to the list of search results:
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the settlement from the list.
4. Enter the street name:
1. Tap
.
2. Start entering the street name on the keyboard.
3. Get to the list of results:
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Instead of picking one of the streets, tap
5. Enter the house number:
.
1. Tap
.
2. Enter the house number on the keyboard.
3. Tap
to finish entering the address.
6. A list appears with the matching addresses. Tap the desired
one.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Page 52
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Selecting an intersection as the destination
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
(Simple mode), or
,
2. By default, TRAX436 proposes the country/state and settlement
where you are. If needed, tap the button with the name of the
country/state, and select a different one from the list.
3. If needed, change the settlement:
•
To select the settlement from the list of recently used ones,
tap the button.
•
To enter a new settlement:
1. Tap the button with the name of the settlement, or if you
have changed the country/state, tap
.
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the settlement from the list.
4. Enter the street name:
1. Tap
.
2. Start entering the street name on the keyboard.
3. Get to the list of results:
•
After entering a couple of characters, the names that
Page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the street from the list.
5. Tap the
button.
•
If only a few intersecting streets exist, their list appears
immediately.
•
In case of a longer street, a keyboard screen appears.
Start entering the name of the intersecting street on the
keyboard. As you type, if the matching streets can be
shown on one screen, their list appears automatically.
6. Tap the desired intersecting street in the list.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Selecting a city centre as the destination
The City Centre is not the geometric centre of the settlement but an
arbitrary point the map creators have chosen. In towns and villages, it is
usually the most important intersection; in larger cities, it is an important
intersection.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
(Simple mode), or
,
2. By default, TRAX436 proposes the country/state and settlement
where you are. If needed, tap the button with the name of the
country/state, and select a different one from the list.
3. If needed, change the settlement:
Page 54
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
•
•
To select the settlement from the list of recently used ones,
tap the
To enter a new settlement:
1. Tap the button with the name of the settlement, or if you
button.
have changed the country/state, tap
.
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the settlement from the list.
4. Tap the
button.
5. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Entering an address with a postal code
The current Sensis R15 map does not support Post Codes as
described in this section.
NOTE
All of the above address searching possibilities can be performed with
entering the postal code instead of the settlement name. Find below an
example with a full address:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Simple mode), or
Page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
,
(Advanced mode).
2. By default, TRAX436 proposes the country/state and settlement
where you are. If needed, tap the button with the name of the
country/state, and select a different one from the list.
3. Tap the button with the name of the settlement, and enter the
postal code:
1. Start entering the postal code on the keyboard.
2. Get to the list of results:
•
After entering a couple of numbers, the ones that are a
match appear in a list.
•
Tap
to open the list of results before it
appears automatically.
3. Pick the settlement from the list.
4. Enter the street name:
1. Tap
.
2. Start entering the street name on the keyboard.
3. Get to the list of results:
•
After entering a couple of characters, the names that
match the string appear in a list.
•
Tap
to open the list of results before it
appears automatically.
4. Pick the street from the list.
5. Enter the house number:
1. Tap
.
2. Enter the house number on the keyboard.
3. Tap
to finish entering the address.
6. The map appears with the selected point in the middle. Tap
Page 56
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Tips on entering addresses quickly
•
When you are entering the name of a settlement or a street,
TRAX436 only displays those characters that appear in possible
search results. The other characters are greyed out.
•
When entering the settlement name or the street name, tap the
button after a couple of letters; TRAX436 lists the
items that contain the character set.
•
You can speed up finding an intersection:
•
Search first for the street with a less common or less usual
name; fewer letters are enough to find it.
•
If one of the streets is shorter, search for that one first. You
can then find the second one faster.
•
•
You can search for both the type and the name of a road. If the same
word appears in several names, for example in the name of streets, roads
and avenues, you can obtain the result faster if you enter the first letter of
the street type: For example, enter Pi A to obtain Pine Avenue and skip
all Pine Streets and Pickwick Roads.
You can also search in postal codes. This is useful when a
street name is common and it is used in several districts of a city.
Selecting the destination from your Favourites
You can select a location that you have already saved as a Favourite to
be your destination.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
(Simple mode) or
,
2. Tap the Favourite that you want to set as your destination.
Page 57
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
3. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Selecting the destination from the POIs
You can select your destination from the POIs included with TRAX436 or
from the ones you have previously created.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Simple mode), or
,
(Advanced mode).
2. Select the area around which the POI should be searched:
•
•
: The POI will be searched around a given address.
: The map appears with the Cursor in the middle.
Modify the location of the Cursor if necessary, then tap
. The POI will be searched around the given
location.
•
•
•
: The POI will be searched around the current
GPS position.
: The POI will be searched around the
destination of the active route.
: The POI will be searched not around a given
point but by the size of the detour it means from the active
route. This can be useful if you search for a later stopover
that causes only a minimal detour. For example upcoming
petrol stations or restaurants.
Page 58
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
3. You can narrow the search with the following:
•
Select the POI group (e.g. Accomodation), and after that, if
needed, select the POI subgroup (e.g. Hotel or Motel).
•
To find the POI by its name, tap
, and use the
keyboard to enter a part of the name.
•
To list all POIs in a given POI group, tap
.
4. [optional] When finally the list of results appear, you can sort the list:
•
•
: sort the list alphabetically (available when you
search around a single location)
: sort the list by the distance from your current
position in a straight line (available when you search around a
single location)
•
•
: sort the list by the distance to drive on route from
your current position (available when you search along the active
route)
: sort the list by the size of the needed detour
(available when you search along the active route)
5. Tap the desired POI in the list.
6. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Selecting the destination with a saved POI
search criteria
POI search criteria can be saved in the POI section of the Manage menu,
but TRAX436 is already shipped with some saved criteria you can use
instantly when searching for a POI.
Page 59
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
(Simple mode), or
,
2. Tap
.
3. Select one of the saved criteria, and the list of matching POIs
appear.
4. Tap the desired POI in the list.
5. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Selecting the destination from the History
The destinations that you have set earlier appear in the History.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
(Simple mode), or
,
2. If necessary, turn the page with to see earlier destinations.
3. Tap the desired item.
4. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Selecting the destination by entering its
coordinate
Page 60
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
This feature is available in Advanced mode only.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
,
.
2. [optional] Tap
to change the format of the
displayed coordinates.
3. Tap the latitude or longitude value to change the coordinate.
4. Enter the coordinate values in WGS84 format on the keyboard: the
latitude (N or S) and the longitude (E or W).
5. Tap
.
6. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Creating a multi-point route (inserting a via
point)
Multi-point routes are created from simple routes, so a route must
be active first. One of the ways of expanding the route is to keep the
destination, and to add via points (intermediate destinations).
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This
will be the additional destination in the route.
2. The map appears with the selected point in the middle, and the
Cursor menu opens automatically.
3. Tap
to add the point as an intermediate
destination preceding the final destination of the route.
4. [optional] To add more points to the route, repeat the above
steps as many times as you like.
Page 61
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
If you insert a via point in a route that is already a multi-point route, you will
automatically be taken to the Edit Route screen where you can determine
the position of the intermediate route point. When you enter the screen,
the new via point is placed as the last via point before the final destination.
The new point is the selected point in the list.
You have the following options:
Button
Action
The selected point moves up in the list (becomes a via point
to be reached earlier). Tap this button repeatedly, and the
point becomes the start point of the route.
The selected point moves down in the list (becomes a via
point to be reached later). Tap this button repeatedly, and
the point becomes the final destination of the route.
The route is reversed. The start point becomes the
destination, the destination becomes the start point, and
all via points are to be reached in the opposite order than
before.
The route is optimised. The start point and the destination
remain at their position, but the via points are reordered to
make the shortest possible route.
The selected point is removed from the route. The route
remains as it was before adding the new point.
Every time a new point is added, the route is recalculated automatically,
and you can start navigating right away.
Creating a multi-point route (appending a new
destination)
Multi-point routes are created from simple routes, so a route must be
active first. One of the ways of expanding the route is to add a new
destination. The previous destination becomes the last via point of the
route.
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This
will be the additional destination in the route.
2. The map appears with the selected point in the middle, and the
Cursor menu opens automatically.
Page 62
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
3. Tap
additional functions.
to open the full Cursor menu with the
4. Tap
to add the point as a new final destination
demoting the previous one to the last intermediate destination.
5. [optional] To add more points to the route, repeat the above
steps as many times as you like.
Every time a new point is added, the route is recalculated automatically,
and you can start navigating right away.
Editing the route
This feature is available in Advanced mode only.
Tap the following buttons:
,
,
.
The list of route points appear with the start point at the top of the list and
the final destination at the bottom. If several via points exist, you might
need to turn the page.
Tap one of the route points in the list. You have the following options:
Button
Action
The selected point moves up in the list (becomes a via point
to be reached earlier). Tap this button repeatedly, and the
point becomes the start point of the route.
The selected point moves down in the list (becomes a via
point to be reached later). Tap this button repeatedly, and
the point becomes the final destination of the route.
The route is reversed. The start point becomes the
destination, the destination becomes the start point, and
all via points are to be reached in the opposite order than
before.
The route is optimised. The start point and the destination
remain at their position, but the via points are reordered to
make the shortest possible route.
The selected point is removed from the route.
Page 63
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
As soon as you leave this screen, the route is recalculated automatically,
and you can start navigating right away.
Viewing the whole route on the map (Fit-to-
Screen)
The map can be moved and scaled to show the whole line of the route.
You do not need to manipulate the map manually. The Plan on Map
feature does it for you.
In Advanced mode you have the following options to enter Plan on Map:
•
•
Via the Find menu: tap
,
,
.
Via the Route Information screen: tap
,
,
,
.
•
Via the Route Information screen using a shortcut: tap
,
.
Watching the simulation of the route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
1. Tap the following buttons:
,
.
2. The Route menu appears. There are two ways of running the
route simulation:
•
Tap
to run the simulation at high speed to give
you a quick overview of the route.
Page 64
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
•
Tap
to run the simulation at normal speed and
with voice guidance instructions announced. This option is
for demonstration purposes, or for checking difficult parts of
the route in advance.
3. The simulation can be aborted any time by tapping
.
Enabling Safety Mode
This feature is available in Advanced mode only.
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep
your attention on the road. While driving, you will not be able to set a new
destination or to change settings. The only screen control that remains
enabled is the gesture that puts you back on the Map screen.
The procedure is explained starting from the Map screen.
Tap the following buttons:
,
,
,
.
Pausing the active route
You do not need to pause the active route: when you start driving again,
TRAX436 restarts the voice instructions from your position.
Deleting the next via point from the route
The easiest way to delete the upcoming route point (the next via point)
in Advanced mode is to open the Route Information screen by tapping
the Turn Preview field (
) on the Map screen, and then tapping
.
In Advanced mode, you have another option. Tap the following buttons:
,
,
,
.
Page 65
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Deleting the active route
The easiest way to delete the active route in Advanced mode is to open
the Route Information screen by tapping the Turn Preview field (
) on
the Map screen, and then tapping
.
In Advanced mode, you have another option. Tap the following buttons:
,
,
.
If via points exist in the active route, you cannot delete
the route immediately on the Route Information screen.
Tap
repeatedly until all via points disappear
button appears. Tap it to cancel the
NOTE
and the
whole route.
Using Track Logs
TRAX436 can record the track (how your GPS position changed) that you
drive.
You do not need to select a destination and create a
route for this; you can also record your driving path while
cruising.
TIP
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
Recording the travelled path (creating a Track Log)
1. Start driving.
2. Tap the following buttons:
,
,
.
Page 66
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
3. Start the recording: tap the
button.
You return to the map and you can continue driving.
4. Repeat the above steps, then tap
later to stop the
recording. TRAX436 labels the Track Log with a time stamp.
(As an alternative, you can tap the
button in the Quick menu to
start, and later to stop the Track Log recording.)
Simulating a Track Log on the map
1. Tap the following buttons:
,
,
.
2. Locate the desired Track Log, and then tap the
to it.
button next
3. The map returns, and the Track Log simulation (a life-like
replay) begins.
4. You can stop the replay any time by tapping the
button.
Changing the colour of a Track Log
1. Tap the following buttons:
,
,
.
2. Tap the desired Track Log and then tap one of the colour buttons.
Saving a route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
Page 67
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
1. Tap the following buttons:
,
,
.
2. Enter a name for the saved route, and then tap
.
When you save a route, TRAX436 not only saves the route points but the
whole itinerary:
•
The saved route might have been influenced by TMC information.
When you later use the route, it appears as it was saved, but if it needs
to be recalculated, the current TMC information will be used in the new
route.
•
•
If you updated your map since you first saved the route,
TRAX436 recognises the change, and recalculates the driving
instructions according to the latest available map information.
TRAX436 deletes from the route the via points that you already
left behind during navigation together with the road segments
used to reach it. To avoid this, if you want to save the route, you
need to save it before you start navigating.
Loading a saved route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
1. Tap the following buttons:
,
,
.
2. Tap the route you wish to navigate.
3. In the very likely case when the start position of the saved route is
different from the current GPS position, you need to confirm whether you
want to stop navigating from the current GPS position to use the start point
of the loaded route.
•
If you choose this option, the automatic off-route recalculation will be
disabled.
•
If you choose to keep the current GPS position as the start point, the
route will be recalculated starting from your current position.
4. The map appears, and you can start navigating.
Page 68
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
4: Reference book (Advanced mode)
On the following pages you will find the description of the different menu
screens of TRAX436 in Advanced mode. In Simple mode, these functions
work the same way, but only a few of them are available.
The Navigation menu:
TRAX436 starts with the Navigation menu. From there you can access the
following screens:
Screen
Button
Description
Map
The Map screen.
Find
Selecting the destination (for example
an address or a POI) or using the search
engine of TRAX436 for any other reason
(for example to look for the phone
number of a POI).
Route
Managing the active route (obtaining
information about it, changing or deleting
it or parts of it) or planning a route
without GPS reception.
Manage
Settings
Managing user data, such as saved
locations (POIs, Favourites, Pins, and
History items), Saved Routes, and Track
Logs.
Managing the behaviour of TRAX436,
for example the map layout during
navigation, the used languages or the
warnings.
Map screen
TRAX436 is primarily intended for land navigation. That is why maps in
TRAX436 look similar to paper road maps. However, TRAX436 provides
much more than regular paper maps: you can customise the look and the
content of the map.
The most important and most often used screen of TRAX436 is the Map
screen.
Page 69
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
During navigation, the screen shows route information and trip data (left
screenshot), but when you tap the map, additional buttons and controls
appear for a few seconds (right screenshot). Most parts of the screen
behave as buttons.
Symbol
Name
Action
Turn Preview, that
is, the next route
event
Opens the Route Information
screen
Second upcoming
route event
Opens the Itinerary
Trip data
Opens the Trip Information screen
Battery status
Opens the Quick menu
Opens the Quick menu
Opens the Quick menu
GPS position
quality
Vehicle used in
route calculation
Top row
Next street
n/a
n/a
Bottom row
Current street and
house numbers on
left and right
Map view modes
Switches between 2D and 3D
map modes
,
Menu
Opens the Navigation menu
Page 70
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Detour
Opens the Detour screen, two
ways of modifying the route:
• the list of Saved Search Criteria
• a button to avoid parts of the
route
Position menu
Opens the Position menu
(appears when
navigating a route)
Cursor menu
(appears when
there is no GPS
position or the
Cursor is not at
the current GPS
position)
Opens the Cursor menu
Open/Close Map
control buttons
Tap this button to show or hide the
following map control buttons:
• Zoom in/out
• Rotate left/right (3D map only)
• Tilt up/down (3D map only)
• Zoom preset buttons (2D map
only)
• Tilt and zoom preset buttons (3D
map only)
• Return to GPS position button
• Smart Zoom button
Rotate left, rotate
right
Rotates the 3D map left or right
,
,
,
Tilt up, tilt down
Tilts the 3D map
Scales the map
Zoom in, zoom out
Page 71
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Return to GPS
position (appears
Tap this button to move the map
back to the current GPS position.
when GPS position If the map has been rotated in 3D
is available and you mode, automatic map rotation is
have moved the
map)
also re-enabled.
Enable Smart
Tap this button once to enable
Smart Zoom.
Zoom (replaces
the previous button
if there is no GPS
position or the
map has not been
moved)
Tap&hold the button to set the
zoom limits of Smart Zoom.
Zoom preset
buttons (available
in Advanced mode
only)
Tap one of the preset buttons
to set the zoom level to a fix,
predefined value. Smart Zoom
is disabled. These buttons are
available in 2D mode.
Tap&hold any of the buttons to set
its value to the current zoom level,
or to reset it to its original value.
Tilt preset buttons
(available in
Advanced mode
only)
Tap one of the preset buttons to
set the tilt and zoom levels to fix,
predefined values. Smart Zoom
is disabled. These buttons are
available in 3D mode.
Tap&hold any of the buttons to
set its value to the current tilt and
zoom levels, or to reset it to its
original value.
Current GPS
position (on nearest
road)
n/a
Cursor (selected
map location)
n/a
n/a
Lane information
Page 72
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Orange Line Active route
(Day mode)
n/a
White Line
(Night mode)
Map scale (2D map n/a
only)
Icons on the map
There are several status icons on the map. Most of them also function as a
button. The information they provide is as follows:
•
•
•
•
•
•
•
GPS position quality
Battery status
Vehicle type used for route calculation
Sound status (muted or enabled)
Track log recording status
TMC reception and processing status
Bluetooth connection and communication status
Battery, GPS position quality and
Vehicle type indicator
This is a complex indicator, and a button that opens the Quick menu.
The battery part shows information about the rechargeable battery of the
device.
Icon
Description
The battery is charging. The device runs on external
power.
The battery is not charging but it is full.
The battery is not full but it still has enough capacity.
Page 73
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
You need to recharge the battery.
The GPS reception quality shows the current accuracy of the position
information.
Icon
Description
TRAX436 has no connection to the GPS receiver: GPS
navigation is not possible.
Devices with a built-in GPS receiver are permanently
connected. On such devices, the icon does not appear in
normal circumstances.
TRAX436 is connected to the GPS receiver, but the
signal is too weak and the receiver cannot determine the
GPS position.
GPS navigation is not possible.
Only a few satellites are received. Position information is
available, but elevation (altitude) cannot be calculated.
GPS navigation is possible, but the position error may be
significant.
Altitude information is available, the position is a 3D
position. GPS navigation is possible.
The remaining part of the field shows the vehicle type used for route
calculation.
Icon
Vehicle Type
Car
Taxi
Bus
Emergency vehicles
Page 74
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Bicycle
Pedestrian
Status indicator strip
This is a complex indicator. In one strip it indicates the following status
information:
Icon
Description
The sound output of TRAX436 is muted.
The sound output of TRAX436 is enabled.
TRAX436 records a Track log when GPS position is available.
Track log recording is disabled.
No TMC receiver is connected or TMC is turned off.
TMC receiver is connected and a radio station with TMC
broadcast is received.
There are new, unread TMC events.
A part of the route is bypassed based on TMC events.
Page 75
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
A part of the route is mentioned in TMC events but could not
be bypassed (for example, the destination is on a congested
street).
The Bluetooth radio is switched off.
The Bluetooth radio is turned on, but no telephone is
connected.
There is an error in the Bluetooth connection.
TRAX436 is connected to a telephone as a handsfree set via
Bluetooth.
A phone call is in progress over the Bluetooth connection.
Next two route events (Turn Preview fields)
There are two fields reserved on the Map screen to display the next two
manoeuvres (route events that are listed in the Itinerary). Both the type
of the event (turn, roundabout, exiting motorway, etc.) and distances are
displayed (the top manoeuvre shows the distance from the current GPS
position, and the lower manoeuvre shows the distance between the next
point and the final destination, or 3rd position).
Most of these icons are very intuitive and you also know them as road signs.
The following table lists some of the frequently shown route events. The
same symbols are used in both fields:
Icon
Description
Turn left.
,
,
Turn right.
Page 76
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Turn back.
,
,
,
,
,
,
,
,
,
,
,
,
Bear right.
Turn sharp left.
Keep left.
Continue straight in the intersection.
Enter roundabout. The number of the exit is shown in the
circle, but only for the next turn.
Enter motorway.
Exit motorway.
Board ferry.
Leave ferry.
Approaching the next via point.
Approaching the destination.
In certain situations when route events are not important, these fields show
other useful pieces of information. They are described here: page 16.
Page 77
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Objects on the map
Streets and roads
TRAX436 shows the streets in a way that is similar to how the paper road
maps show them. Their width and colours correspond to their importance:
you can easily tell a motorway from a small street.
If you prefer not to see street names during navigation,
turn them off (page 103).
TIP
3D object types
To enable or disable 3D visualisation on the map, tap the following buttons:
,
,
,
.
TRAX436 supports the following 3D object types:
Icon
Description
Elevated roads
Complex intersections and vertically isolated roads
(such as overpasses or underground tunnels) are
displayed in 3D.
Terrain Detail
Level
3D terrain map data shows changes in terrain,
elevations or depressions in the land when you view
the map, and use it to plot the route map in 3D when
you navigate.
Landmarks
Landmarks are 3D artistic or block representations of
prominent or well-known objects. 3D landmarks are
only available in selected cities and countries.
Building Visibility Feature unavailable. (This switch is presented for
future expansion and currently performs no action)
Elements of the active route
TRAX436 shows the route in the following way:
Page 78
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Symbol
Name
Description
Current GPS
position
Your current position displayed on the
map.
• In pedestrian mode it is the exact
GPS position.
• If a vehicle is selected for route
calculation, the arrow is put on the
nearest road.
Cursor (selected
map location)
The location selected in the Find
menu, or a map point selected by
tapping the map.
Start point
The first point of the route.
Normally, if GPS position is available, it
is the start point of the route. If there is
no valid GPS position, TRAX436 uses
the last known GPS position as the start
point.
When you are using a saved route,
TRAX436 asks you if you want to use
your GPS position or the first point in
the saved route as the start point.
You can also modify the start point
in the Cursor menu. If you do so, the
automatic off-route recalculation needs
to be turned off to keep the selected
point as the start point.
If the automatic off-route recalculation is
disabled for any
of the above, tapping the
icon
in the Turn Preview field not only
initiates a route recalculation from
the current GPS position, but it will
re-enable the automatic off-route
recalculation as well.
Page 79
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Via point
A via point is an intermediate
destination. You can place as many
via points as you want.
Destination (end
point)
The last point of the route, the final
destination.
Route colour
The route always stands out with its
colour on the map, both in daytime
and in night colour mode. The active
leg of the route is always displayed
in a brighter shade than the inactive
(upcoming) legs.
Active leg of the
route
The section of the route on which you
are driving.
If you have not added any via points
(only a destination), the entire route is
the active leg. If you have added via
points, the active leg is the part of the
route from your current location to the
next route point (the next via point, or
the destination if there are no more
via points to reach).
Inactive legs of the
route
The future sections of the route; each
of them becomes active when you
reach the via point at its beginning.
Streets and roads
that are excluded
You can choose whether you want
to use or avoid certain road types
from the navigation (page 105). However, when TRAX436
cannot avoid such roads, the route
will include them and it will show them
in a colour that is different from the
route colour.
Detour menu
This screen contains quick detour possibilities during navigation. It can be
opened directly from the Map screen by tapping
You have the following options:
.
Page 80
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
•
On the main part of the screen you can see the first page of Saved
Search Criteria. Select any of the criteria to quickly receive the list of nearest
matching POIs, and instantly plan a new route to the desired one, or insert it
as a via point in your active route.
•
In Advanced mode more buttons appear at the bottom:
•
•
: If you want to bypass a part of the route starting
from the next intersection, tap this button, and select a distance
to bypass.
: If you have used the above function before, tap
this button to clear the restrictions from the map.
Cursor menu
As soon as you select one point in the Find menu, the map appears with the
Cursor menu, a menu with possible actions for the selected point.
Alternatively, when you tap the map, control buttons appear. Tap again to
place the Cursor, a radiating red dot. Now tap
opens with a list of options.
, and the Cursor menu
In order to show a part of the map with the Cursor menu, it contains only a
few buttons first. Tap
to get all the options.
Button Description
Closes the Cursor menu, and returns to the previous
screen.
Zooms out the map.
Zooms in the map.
With the Cursor menu open, you can still move or scale
the map, and tap the map anywhere to place the Cursor
to a new location, but when you use this button, the
Cursor jumps back to the place where it was at the time
when you opened the Cursor menu.
Page 81
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Displayed at the Cursor if it is at the same location with
which the Cursor menu was opened.
Displayed at the Cursor if it has been relocated since the
Cursor menu was opened.
Opens a new screen with the address and coordinate of
the Cursor, and the list of nearby POIs.
Opens the full-screen Cursor menu with all the possible
options.
A new route is calculated with the Cursor as the
destination. The previous route is deleted.
If the Cursor is at or near the destination, this button replaces
the previous one, and deletes the current destination from
the route. The last via point is promoted as destination, or if
there are no via points, the route is deleted.
The Cursor is added to the active route as an
intermediate route point, a point to be reached before
the destination. If there is already a via point in the route,
the Edit Route screen opens to let you decide where the
new via point is to appear in the route.
If the Cursor is at or near one of the via points,
this button replaces the previous one, and deletes
the selected via point from the route. The route is
recalculated without the deleted point.
The Cursor is appended at the end of the route as the
new destination. The previous destination is demoted,
and becomes the last via point.
This button is similar to the
button, but
a new screen opens, and the route is calculated with
all the possible route calculation methods (Fast, Short,
Economical and Easy). Observe the results, and choose
one of the routes to navigate.
The Cursor becomes the start point of the route. This
means that the route will not be started from the current
GPS position, and Automatic Off-route Recalculation
needs to be turned off to keep the start point the
selected one.
Page 82
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
If the Cursor is at or near the selected start point, this
button replaces the previous one, and deletes the
start point from the route. The current GPS position is
used again as the start point, and Automatic Off-route
Recalculation is re-enabled.
The Cursor is saved as a user POI. Select the POI
group and give a name for the POI, then select a
suitable icon, enter a phone number, and additional
information if you like.
Map locations can be marked with Pins. Unlike POIs, a
Pin has no name and other details, only a colour to let
you tell one from another on the map.
If the Cursor is at or near a Pin, this button replaces the
previous one, and deletes the Pin the Cursor is near to.
The Cursor is saved as the location of a Road Safety
Camera (speed camera or red light camera). A new
screen appears where you can set the type of the
camera, the direction of the measured traffic, and the
speed limit checked (if applicable).
If the Cursor is at or near a Road Safety Camera, this
button replaces the previous one, and opens a new
screen where you can edit the details of the camera.
The location of the Cursor is added to the list of
frequently visited destinations, the so called Favourites.
You can give a name for the Favourite.
Position menu
When you follow the recommended route on the map (the Cursor is the
current GPS position), the Position menu replaces the Cursor menu. It does
not contain buttons that modify the current route, as the GPS position is not
useful as a route point.
To open the Position menu, tap
.
Page 83
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Route Information screen
The Route Information screen has all the data and some of the functions
you need while you navigate. There are two ways to open this screen:
•
It can be opened directly from the Map screen by tapping the Turn
Preview field (
).
•
In Advanced mode, from the Navigation menu tap the following buttons:
,
.
In the top section of the screen you see information about the current route.
The fields on this screen are continuously updated while you keep the
screen open.
When you open the screen, all fields contain information about reaching
your final destination. Tap any of the fields to see data on the via points
starting from the first one through the final destination again.
You have the following data and functions on this screen:
Name
Description
Function
Destination
The upper part of this screen
shows your planned route as
a horizontal line. Its leftmost
point is the start of the route,
the rightmost one is the final
destination, and you can see
your via point flags along the
line, spaced in proportion to
their distance.
Tap this field to
change the content
of all data fields to via
point information.
Page 84
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Arrival
(Estimated
Arrival)
Shows the estimated arrival
time at the final destination of
the route based on information
available for the remaining
segments of the route. The
calculation cannot take into
account traffic jams and other
possible delays.
Tap this field to
change the content
of all data fields to via
point information.
Distance Left Shows the distance you need
to travel on the route before
Tap this field to
change the content
of all data fields to via
point information.
reaching your final destination.
Time Left
Shows the time needed to reach Tap this field to
the final destination of the route change the content
based on information available
for the remaining segments of
the route. The calculation cannot
take into account traffic jams
and other possible delays.
of all data fields to via
point information.
Method
This field shows how the
Tap this field to
route was calculated. It either
displays the Route Calculation
change the content
of all data fields to via
Method or the Vehicle field from point information.
the Route Planning options. If
you have chosen Car, Taxi or
Bus, the type of the route (Fast,
Short, Easy or Economical) will
be displayed here; if you have
selected Emergency, Bicycle or
Pedestrian, this information will
be displayed here.
Warning
icons
In these square fields graphical Tap any of the icons
symbol are displayed in case
warnings are attached to the
planned route. These are
for an explanation.
warnings, so icons always
show information for the whole
route, even if the data fields
display values from your current
position to a via point only.
Page 85
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Opens the Route
Planning options
screen from
theSettings menu.
Opens the map screen
designed for route
planning.
Appears only if at least one via Deletes the next via
point exists.
point from the route.
Appears only if there are no via Deletes the active
points in the route. route.
Trip Information screen
The Trip Information screen has both route and travel data you might need
during your journey. It can be opened directly from the Map screen by
tapping the Trip Data field (
).
The fields on this screen are continuously updated while you keep the
screen open.
When you open the screen, all route data fields contain information
about reaching your final destination. Tap
and the fields
concerning your route display data for the next via point. Tap the button
repeatedly to toggle between the two possibilities.
You have the following data and functions on this screen:
Page 86
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Name
Description
Function
Shows whether the route data
fields show information about
the final destination (checkered
flag) or about the next via point
(yellow flag).
or
Field next to Shows the name or number of
the flag
the destination.
Turn
Preview
Shows the type and distance of
the next route event.
Compass
Shows the current heading.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Speedo-
meter
Shows the current speed both
graphically and as a number.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Distance
Remaining
Shows the distance you need
to travel on the route before
reaching your final destination.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Time
Shows the time needed to reach Tap this field to show
Remaining
the final destination of the route it on the map screen
based on information available
for the remaining segments of
the route. The calculation cannot
take into account traffic jams
and other possible delays.
in one of the Trip Data
fields.
Arrival Time Shows the estimated arrival
time at the final destination of
the route based on information
available for the remaining
segments of the route. The
calculation cannot take into
account traffic jams and other
possible delays.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Page 87
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
GPS Time
Shows the current time
corrected with time zone offset.
The accurate time comes from
Tap this field to show
it on the map screen
in one of the Trip Data
the GPS satellites, and the time fields.
zone information comes from the
map or it can be set manually in
Regional settings.
Altitude
Shows the elevation if it is
Tap this field to show
provided by the GPS receiver.
it on the map screen
in one of the Trip Data
fields.
Speed Limit Shows the speed limit of the
Tap this field to show
current street if the map contains it on the map screen
it.
in one of the Trip Data
fields.
Opens a new screen
with three resettable
Trip Computers.
Tap this button to
change the content of
the Route Data fields
to show information
about the next via
point.
If you tap the previous button,
this one replaces it.
Tap this button and
the Route Data fields
show information
about the final
destination again.
Most of the fields on this screen have a
symbol next to them. This symbol
shows whether the field it is attached to is shown on the map as a Trip Data.
It also shows the position of the data as follows:
Symbol Description
This value is not shown on the map screen.
Page 88
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
This value appears on the map screen in the Trip Data area.
This is the value at the top.
This value appears on the map screen in the Trip Data area.
This is the value in the middle.
This value appears on the map screen in the Trip Data area.
This is the value at the bottom.
Trip Computer screen
The Trip Computer screen provides collected trip data. It can be opened
from the Trip Information screen by tapping
.
The fields on this screen are continuously updated while you keep the
screen open.
You can switch between the trips, pause then resume them, or reset their
data.
You have the following functions on this screen:
Name
Description
Pauses the trip currently shown on the screen. Values
on the screen stop changing.
This button replaces the previous one if it has been
activated. Tap it to resume collecting trip data.
Resets all counters of the currently shown trip.
Collecting trip data is restarted only when TRAX436
receives a position from the GPS.
Cycles through all trips.
,
Quick menu
The Quick menu is a selection of controls that are frequently needed during
navigation. It can be opened directly from the Map screen by tapping
.
Page 89
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
If you tap any of the switches in the Quick menu except for the Vehicle type,
the Map screen immediately returns. A switch is on if its lamp is lit. The
Vehicle type button is different. It is a multi-value button. It opens a list of
available choices, and the symbol of the selected vehicle is shown on the
button.
Name
Main function (single tap)
Function (tap
and hold)
Master
Volume
slider
Adjusts the sound volume of the
device. All sounds of the application
are involved.
No action.
If you only adjust the volume, you
need to use this button to return to
the Map screen.
Opens the
Navigation menu.
Mutes all sounds of TRAX436.
Opens Sound
settings.
Switches between the daytime and
night colour schemes manually.
This will not disable the automatic
switching between the two schemes:
the other colour scheme returns at
the next scheduled time.
Opens Colour
Profiles settings.
Not used.
Opens 3D
Settings.
Page 90
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Tap this button and select the
Vehicle type to be used for route
calculation. Otherwise it is selected
in Route Planning options in Settings
(page 104).
Opens Route
Planning options.
Changing the Vehicle type triggers
an automatic route recalculation.
Turns track log recording on or off
Opens Manage
otherwise controlled on the Manage Track Logs.
Track Logs screen.
Opens the GPS Data screen with
satellite information, data coming
from the GPS receiver, and a
shortcut to the GPS Settings screen
if needed (GPS receiver detection is
automatic).
Same as main
function.
This button opens the list of TMC
messages, and provides access
to the TMC Settings and the radio
station settings screens.
Same as main
function.
Opens the Bluetooth menu screen
Same as main
and access to the Bluetooth feature. function.
GPS data screen
Tap the following buttons:
,
to open the GPS
Data screen and to see the status of the GPS reception.
Page 91
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Icon
Colour
Green
Name
Description
TRAX436 has a
connection to the GPS
receiver and GPS position
information is available
in 3D: TRAX436 can
calculate both your
horizontal and vertical GPS
position.
Yellow
TRAX436 has a
connection to the GPS
receiver and GPS position
information is available
in 2D: only the horizontal
position is calculated,
TRAX436 cannot
calculate your vertical
GPS position.
Grey
Red
TRAX436has a
connection to the
GPS receiver but GPS
position information is not
available.
TRAX436 has no
connection to the GPS
receiver.
Green,
blinking
TRAX436 is connected to
the GPS receiver.
Yellow,
TRAX436 has no
blinking
connection to the GPS
receiver but it is still trying
to establish a connection.
Red, blinking
TRAX436 has no
connection to the GPS
receiver and does not try
to establish a connection.
Page 92
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
n/a
Sky view circle
The virtual sky shows
the visible part of the
sky above you, with your
position as the centre.
The satellites are shown
at their current positions.
The GPS receives data
from both the green and
yellow satellites. Signals
from the yellow satellites
are only received, while
green ones are used by
the GPS to calculate your
current location.
n/a
n/a
Coordinates
Your current GPS position
in WGS84 format.
Status bar for the satellites
Dark bars are for the
yellow and lit bars are
for the green satellites.
The more satellites your
GPS tracks (the green
ones), the better is your
calculated position.
Find menu
Select the destination of your route. Tap the following buttons:
,
.
Button
Description
Reference
If you know at least a part of the address,
Page 47
this is the quickest way to find the location.
You can select your destination from the
thousands of POIs included with TRAX436
or from the ones you have previously
created.
Page 58
Page 93
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
The destinations that you have already
entered in TRAX436 are available in the
History list.
Page 60
Page 60
You can select your destination by entering
its coordinates.
You can select as your destination a location Page 57
that you have already saved as a Favourite.
Opens a special 2D map screen optimised
for route planning. Only the Zoom in and
Zoom out buttons and the route modification
buttons of the Cursor menu appear.
Route menu
Save, load and edit your routes. Tap the following buttons:
,
.
Button
Description
Reference
Opens a screen with useful route data.
Page 84
You can browse the driving instructions that
TRAX436 follows during navigation. You can
exclude manoeuvres or streets to adjust the
route to your preferences.
Page 27
You can modify the route: remove route
points or change their order.
Page 63
Erase the active route with all its route points Page 66
(start point, via points and destination). If you
later decide that you need the same route,
you will have to rebuild it from scratch.
You can save the active route for later use.
Page 67
You can load a previously saved route for
navigation.
Page 68
Page 94
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Opens the Route settings screen with
controls to modify the vehicle, the road
types used for route calculation, or the route
calculation method.
Page 101
You can run a demonstration of the route at
high speed.
Page 40
Page 40
You can run a demonstration of the route at
normal speed.
Manage menu
You can manage the content that TRAX436 stores. Tap the following
buttons:
,
.
Button
Description
Reference
Renaming or deleting saved routes
Page 94
Deleting History items
Page 96
Recording, simulating, renaming or deleting Page 96
track logs, assigning colour to them to be
shown on the map
Renaming or deleting Favourites
Page 97
Creating, updating or deleting POIs
Creating, updating or deleting POI groups
Modifying POI visibility settings
Page 98
Creating, renaming or deleting Saved
Search Criteria
Page 100
Manage Saved Routes
You can manage the previously saved routes. Tap the following buttons:
,
,
.
Page 95
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Button
Description
Button with the name of
Opens the selected route for editing.
the saved route
Deletes the selected route.
Clears the list of saved routes.
Turns the page for additional list items.
,
Manage History
You can manage the list of locations you used lately. Tap the following
buttons:
,
,
.
Button
Description
Deletes the selected item in the History.
Deletes the entire History.
Turns the page for additional list items.
,
Manage Track Logs
You can record Track Logs, then play them back, display them on the map,
and see their details. Tap the following buttons:
,
,
.
Button
Description
Starts recording the track that you drive.
(You can also start recording a track log in
the Quick menu.)
Page 96
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Stops the ongoing Track Log recording. (You
can also stop the track log recording in the
Quick menu.)
Button with the name of
the track log
Shows the details of the selected Track Log.
Starts a simulated playback of the selected
Track Log on the map.
Turns the page for additional list items.
,
When track log details are shown:
Button
Description
Button with the name of
the Track Log
Opens a keyboard screen to let you rename
the Track Log.
Tap this button to hide the Track Log on the
map. No colour will be assigned to the Track
Log.
Tap one of the coloured buttons to assign a
colour to the Track Log. The Track Log will
be shown on the map with this colour.
The map returns with the Track Log. The
map is scaled to show the whole Track Log.
Deletes the selected Track Log.
Saves the Track Log on the inserted
memory card in GPX format.
Manage Favourites
You can manage the list of your Favourites. Tap the following buttons:
,
,
.
Page 97
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Button
Description
Button with the name of
Opens the selected Favourite for editing.
the Favourite
Deletes the selected item in the list of
Favourites.
Clears the list of Favourites.
Turns the page for additional list items.
,
Manage POIs
You can manage your POIs, and set the POI visibility for both your POIs and
the ones that came with the product. Tap the following buttons:
.
,
,
Button
Description
Button with the name of
the POI group
Opens the list of the subgroups of this POI
group. The new list behaves the same as
this one.
Button with the name and Opens the selected POI for editing. Only the
address of a POI item
POIs you have created appear in this list.
Opens the selected POI group for editing.
Tap to filter the list to contain only the POIs
that you saved.
Tap to see all POIs in the list.
Creates a new POI group at the given group
level.
Turns the page for additional list items.
,
Page 98
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
This POI group is not shown on the map.
This POI group and all its subgroups are
shown on the map.
This POI group and some of its subgroups
are shown on the map.
This POI group contains POIs that you
saved.
When a POI group is open for editing:
Button
Description
Items in the POI group will not be shown on
the map.
The distance buttons set the zoom level
from which the items in the POI group will be
shown on the map.
,
Subgroups under the edited POI group will
inherit its visibility settings.
Button with the icon of
the POI group
Tap this button to select a new icon for the
POI group.
Deletes the edited POI group. You are only
allowed to remove POI groups that you have
created.
When a POI item is open for editing:
Button
Description
Button with the name of
the POI
Tap this button to rename the POI.
Button with the name of
the POI
Tap this button to select a new icon for the
POI.
Tap this button to enter a telephone number
for the POI.
Tap this button to enter additional
information for the POI.
Page 99
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Tap this button to delete the selected POI.
Tap this button to move the POI to another
POI group or subgroup.
Manage Saved Search Criteria
You can manage the list of search criteria previously saved to easily find
frequently searched POI types. Tap the following buttons:
,
,
.
Button
Description
Button with the name of
the Saved Search Criteria
Tap to rename the saved query.
Deletes the selected item in the list.
Deletes the entire list.
Turns the page for additional list items.
,
Tap to save a new search criteria. Similar
to how you search for a POI, select the
search reference first, then select the POI
group or subgroup to search in.
User Data Management
You can manage the data you have saved (Pins, POIs, Favourites, History,
and Track logs) and the settings you have made in the program. Tap the
following buttons:
,
,
.
Page 100
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Button
Description
Map locations can be marked with Pins
using the button in the
Remove Pins
Cursor menu. Tap this button to remove all
your Pins from the map.
Backup User Data
Restore User Data
All user data and the current settings
will be saved on the inserted memory
card. There is always one backup file. If
you perform a backup later, the previous
backup will be overwritten with the new
information.
All user data and settings will be
overwritten with the information stored in
the backup file. Data and settings created
after the latest backup will be lost.
Delete User Data
Reset All Settings
All user data will be deleted, and settings
will return to their factory defaults.
All settings will return to their factory
defaults, but no user data will be deleted.
Settings menu
You can configure the program settings, and modify the behaviour of
TRAX436. Tap the following buttons:
,
.
The Settings menu has two pages of submenus. Tap
other options.
to access the
Page 101
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Button
Description
Reference
You can fine-tune the appearance and
Page 103
content of the Map screen.
You can adjust the sounds of TRAX436.
Page 104
These settings determine how routes will be Page 105
calculated.
These settings allow you to adjust the
application to your local language,
measurement units, time and date and
their formats, as well as choose the voice
guidance profile you prefer.
Page 107
You can control how TRAX436 behaves
during navigation.
Page 109
Page 110
You can enable some handy warnings, and
disable the touch screen in a moving vehicle
with Safety Mode.
You can set up the connection to the GPS
receiver.
Page 112
Page 112
You can set up the connection to the TMC
receiver. If the TMC receiver is working, you
can select the radio station to be received.
You can modify the look and behaviour of
the Menu screens.
Page 113
You can change some device settings to control Page 113
the screen backlight when TRAX436 is running.
You can set up an automatic Track Log
Page 114
saving, and fine-tune its settings.
This screen has no navigation feature. It merely
provides information about the maps and
licenses included with your navigation system.
You can switch to Simple mode. In Simple
mode only a few of the above settings are
available. The rest of the settings are set to
values that are optimal for typical use.
Page 17
Page 102
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Map Screen settings
You can fine-tune the appearance and content of the Map screen. Tap the
following buttons:
,
.
.
Button
Description
3D Settings
Use 3D settings to determine which of the present 3D
objects are shown on the map, and adjust the level of
3D visual detail. The options are as follows:
• Elevated Roads: Complex intersections and
vertically isolated roads (such as overpasses or
underground tunnels) are displayed in 3D.
• Terrain Detail Level: 3D terrain map data shows
changes in terrain, elevations or depressions in the
land when you view the map, and use it to plot the
route map in 3D when you navigate.
• Landmarks: Landmarks are 3D artistic or block
representations of prominent or well-known objects.
3D landmarks are only available in selected cities and
countries.
• Building Visibility: Full 3D city building data that
represents actual building size and position on the
map. Building data is limited to the city centre of major
cities.
Colour Profiles TRAX436 is able to show the map and the menus in
different colours during the day and during the night.
Select the colour profiles to be used in each mode,
and select the automatic or manual switching between
the daytime and night colour profiles.
Elevation on 2D 2D maps can also display 3D information. These
Map
top-down maps can display elevation by colours and
shading.
Page 103
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Show Street
Names
Street names and POI icons can be disturbing on
the map during navigation. With this switch you can
suppress these map elements when TRAX436 is
following your position on the map. If you move the
map, both the street names and POI icons reappear
immediately.
Lane
Information
Some maps contain lane information to help you
position your car in the upcoming intersection.
This setting tells TRAX436 whether to display this
information at the top or at the bottom of the map.
Sound settings
You can adjust the sounds of TRAX436. Tap the following buttons:
,
.
.
Button
Description
Master Volume Use the switch to mute all sounds of the device and
then to re-enable them again. The position of the fader
determines the volume level.
Voice Guidance The slider adjusts the loudness of voice prompts. In its
Volume
leftmost position, the voice guidance is suppressed; in
its rightmost position, the master volume applies.
Key Sounds
Key sounds are audible confirmation of either pressing
hardware buttons or tapping the touch screen.
The switch turns the key sounds on or off. Key sounds
are played at the master volume level.
Dynamic
Volume
When driving at high speed, the noise in the car may
be too loud to clearly hear the voice guidance and
other sounds. Using Dynamic Volume you can instruct
TRAX436 to increase the volume when your speed
exceeds a certain minimum, and reach its highest
volume at the given maximum speed.
Page 104
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Route Planning options
These settings determine how routes will be calculated. Tap the following
buttons:
,
,
.
Button
Description
Vehicle
You can set the type of vehicle you will use to navigate
the route. Based upon this setting, some of the road
types will be excluded from the route (e.g. motorways
for pedestrians), or some of the restrictions may not
be taken into account (e.g. emergency vehicles have
only a few restrictions).
Road Types
To let the route fit your needs, you can also set which
Used for Route road types are to be considered for or to be excluded
Planning
from the route, if possible.
Excluding a route is a preference. It does not
necessarily mean total prohibition. If your destination
can only be accessed using some of the excluded
road types, they will be used, but only as much as
necessary. In this case a warning icon will be shown
on the Route Information screen, and the part of the
route not matching your preference will be displayed
in a different colour on the map.
Route
Calculation
Method
You can choose from different route types. The routing
method can also be chosen while creating the route:
when the destination is selected, tap
the Cursor menu.
in
Use Traffic
Information
When TMC messages are received, this setting tells
TRAX436 whether to use that information in route
planning.
Page 105
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Recalculate to
Avoid Traffic
This setting determines how TRAX436 uses the
received TMC information in route recalculation:
• Automatic: When route recalculation becomes
necessary based on the received TMC events,
TRAX436 recalculates the route automatically.
• Manual: When route recalculation becomes
necessary based on the received TMC events,
TRAX436 notifies you, but you can decide whether to
recalculate the route or not.
• Disabled: TMC events are only taken account when
the route is recalculated in an off-route situation.
Vehicle types:
•
•
•
•
•
•
Car
Taxi
Bus
Emergency vehicles
Bicycle
Pedestrians
Road Types Used for Route Planning:
Type
Description
Motorways
You might need to avoid motorways when you are driving
a slow car or you are towing another vehicle.
Unpaved
roads
TRAX436 excludes unpaved roads by default: unpaved
roads can be in a bad condition and usually you cannot
reach the speed limit on them.
Toll roads
By default TRAX436 includes toll roads (pay roads where
there is a per-use charge) in the routes. If you disable toll
roads, TRAX436 plans the best toll-free route.
Charge
roads
Charge roads are pay roads where you can purchase
a pass or vignette to use the road for a longer period of
time. They can be enabled or disabled separately from
toll roads.
Page 106
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Permit
You might need a permit or permission from the owners
needed
to use certain roads or to enter certain areas. TRAX436
excludes these roads from the route calculation by
default.
Ferries
TRAX436 includes ferries in a planned route by default.
However, a map does not necessarily contain information
about the accessibility of temporary ferries. You might
also need to pay a fare on ferries.
Cross-
border
planning
In some cases the route calculated according to your
other navigation and route preferences would lead
through another country. If you wish to always stay within
the same country, turn this option off.
Route Calculation Method types:
Type
Description
Fast
Gives the quickest possible route if you can travel at
or near the speed limit on all roads. Usually the best
selection for fast and normal cars.
Short
Gives a route that has the smallest total distance of
all possible routes between the route points. Usually
practical for pedestrians, cyclists or slow vehicles.
Economical
Easy
Combines the benefits of Fast and Short: TRAX436
calculates as if it were calculating the Fast route, but it
takes other roads to save petrol.
Results in a route with fewer turns. With this option, you
can make TRAX436 to take, for example, the motorway
instead of series of smaller roads or streets.
Regional settings
These settings allow you to adjust the application for your local language,
measurement units, time and date and their formats, as well as choose the
voice guidance profile you prefer. Tap the following buttons:
,
,
.
Page 107
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Type
Description
Program
Language
This button displays the current written language of
TRAX436. By tapping the button, you can select a new
one from the list of available languages. The application
will restart if you change this setting; you are asked to
confirm this.
Voice
Language
(Voice
This button shows the current language of the voice
guidance. By tapping the button, you can select a new
one from the list of available languages and speakers.
Tap any of these to hear a sample voice prompt. Just tap
OK when you have selected the new spoken language.
Profile)
Units
You can set the distance units to be used by the
program. TRAX436 may not support all the listed units
in some voice guidance languages. If you select a
measurement unit not supported by the chosen voice
guidance language, a warning message will appear.
Set Date &
You can set the date and time format. Various
Time Format international formats are available.
Time and
Time Zone
Settings
You can access time and time zone settings. TRAX436
helps you with correcting the device time to the ever
accurate GPS time. TRAX436 can also help you set the
time zone based on your current GPS position.
Time and Time Zone Settings:
Type
Description
Auto Time
Use this feature to synchronise the clock of your device
Correction to to the very accurate time provided by the GPS receiver.
GPS
Use Auto
Time Zone
Use this feature to synchronise the time zone of the clock
of your device to the time zone based on your current
GPS position. This is useful if you travel abroad.
Set Time
Zone
Set time zone manually if you do not want to synchronise
the time zone automatically. This allows you to use Auto
Time Correction and apply a time zone offset to obtain
the desired time.
Page 108
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Navigation settings
You can control how TRAX436 behaves during navigation. Tap the following
buttons:
,
,
.
Type
Description
Keep Position
on Road
This feature allows car drivers to always correct GPS
position errors by matching the vehicle position to the
road network. For pedestrian navigation, this feature
is automatically disabled to let the software show your
exact position.
By turning off this feature you also turn off the GPS
position error filtering. The position shown on the
map will be subject to all position errors and position
fluctuations.
Off-route
Recalculation
This switch tells TRAX436 whether to automatically
recalculate the route when you deviate from it. If
this feature is turned off, you need to initiate route
recalculation manually otherwise navigation will be
stopped until you return to the originally recommended
route.
Setting another point than the current GPS position
as the start point of the active route will automatically
disable this feature.
Restore Lock-
to-Position
If you have moved or rotated the map during navigation,
this feature moves the map back to your current GPS
position and re-enables automatic map rotation after the
given period of inactivity.
Page 109
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Automatic
Overview
This feature switches the map view to Overview mode
when the next route event is at a distance. Overview is
a zoomed out 2D view to let you see the surrounding
area. You have the following controls for Automatic
Overview:
• Route event distance for Overview (Turn Distance
For Overview): The map view will be switched to
Overview mode if the next route even is at least as far
as this value.
• Overview zoom level (Default zoom Level): Overview
mode will appear with this zoom level. You can scale
the map in Overview mode but next time Overview
appears again, this zoom level will be applied.
Warning settings
You can enable some handy warnings, and disable the touch screen in a
moving vehicle with Safety Mode. Tap the following buttons:
.
,
,
Page 110
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Type
Description
Warn when
speeding
Maps may contain information about the speed limits
of the road segments. TRAX436 is able to warn you if
you exceed the current limit. This information may not
be available for your region (ask your local dealer), or
may not be fully correct for all roads in the map. This
setting lets you decide whether you wish to receive the
warnings. You can set the relative speeding at which the
application warns you (100% is the current speed limit):
• In Built-up Areas: in cities and towns
• Elsewhere: at all other locations
There are two types of warnings. You can turn them on
or off independently:
• Audible Warning: A voice message is played using the
selected voice guidance profile.
• Visible Warning: A symbol with the speed limit appears
in the corner of the map
(for example:
).
Speed
Camera
Warning
This feature allows you to receive a warning when
approaching a Road Safety Camera. You must ensure
on your own liability that using this feature is legal in
the country where you intend to use it. You have the
following options:
• Audible Warning: beeps can be played while you are
approaching the camera, or just alert sounds if you
exceed the speed limit while approaching one of these
cameras.
• Visible Warning: the type of the camera and the
controlled speed limit appears on the Map screen while
you are approaching one of these cameras.
Warn if Too
Fast for a
Pedestrian
Enable this warning to be alert if pedestrian mode is
activated and you drive fast. You are asked if you want
to change to car navigation mode. This way you can
be sure you will not be routed via one-way roads in the
wrong direction as a pedestrian could, for example.
Page 111
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Safety Mode Safety Mode disables the touch screen above 10 km/h
(6 mph) to keep your attention on the road. While driving,
you will not be able to set a new destination or to change
settings. The only screen control that remains enabled is
the gesture that puts you back on the Map screen.
GPS settings
You can set up the connection to the GPS receiver. Tap the following
buttons:
,
,
.
Type
Description
GPS Enabled Turn the connection to the GPS receiver on or off.
Turning off the GPS receiver can be useful for indoors
use or demonstration purposes.
Port
The communication port used between the GPS
receiver and the application.
Baud Rate
Autodetect
The communication speed used between the GPS
receiver and the application.
Tap this button and let TRAX436 find and connect the
GPS receiver.
TMC settings
You can set up the connection to the TMC receiver. If the TMC receiver is
working, you can select the radio station to be received. Tap the following
buttons:
,
,
.
Type
Description
Use Auto-
tuner
If Auto-tuner is turned on, the tuner of TRAX436
sweeps through the FM CCIR radio band searching for
a TMC signal. The first station with TMC data will be
used automatically. When no TMC signal is available,
the tuner keeps on searching. Turn off Auto-tuner to
select a radio station manually
Page 112
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
When Auto-tuner is turned off, search for the desired
radio station manually with these buttons.
,
Exclude This
Station
Push this button to put the currently received FM radio
station on an exception list, and make TRAX436 search
for another station instead.
Show
Excluded
Stations
This button opens the list of radio stations previously
excluded. You can re-enable any or all of the excluded
stations.
Menu settings
You can modify the look and behaviour of the Menu screens. Tap the
following buttons:
,
,
.
Type
Description
Animation
You can activate and deactivate the Menu animations.
When animation is turned on, buttons on Menu and
keyboard screens appear in an animated way.
Background
Skin
You can choose the image to be used as the menu
background image.
Not available on the current software.
Device settings
You can change some device settings to control the screen backlight when
TRAX436 is running. Tap the following buttons:
,
,
.
Page 113
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Type
Description
Power
Management
You can set how the backlight will behave when the
screen has not been touched for a while. You have
the following options:
• Backlight Always On: The screen is continuously lit.
• Smart Power Save: When running on battery,
Smart Powersave will light up the screen only when
you press a button, tap the screen, or if there is
something to show you. After a few seconds the
light level decreases, and after another few seconds
the backlight turns off. This helps achieve a longer
battery life.
Backlight at
Daytime
You can set the backlight level for daytime use.
Backlight at Night You can set the backlight level for night use.
Track Log settings
You can set up an automatic Track Log saving, and fine-tune its settings.
Tap the following buttons:
,
,
.
Type
Description
Update
Interval
This is how often track points will be saved. Position
information is normally received once a second from the
GPS. If you do not need such a detailed log, you can
increase this number to save track log space.
Enable Auto-
saving
When auto-saving is enabled, you do not need to turn
track log saving on and off manually. TRAX436 will
automatically start recording the track log as soon as
GPS position is available.
Track Log
Database
Size
This figure shows how much memory is used by the
automatically saved track logs.
Page 114
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Track Logs
Max. Size
You can set the maximum database size for the
automatically saved track logs. When the limit is
reached, the oldest automatically saved track logs will
be deleted.
Create NMEA/ Independently of the normal track log, you can instruct
SIRF Log
TRAX436 to record the native GPS data received from
the GPS device. These logs are saved as separate text
files on the Internal Flash ROM, and they cannot be
shown or replayed in TRAX436.
Page 115
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
6: Bluetooth
TRAX436 includes Bluetooth® connectivity. With its integrated microphone
TRAX436 allows you to answer and make calls from the touch screen.
Access to the Bluetooth feature is in the Quick menu screen (page 89).
From the Map screen tap the following buttons:
The Bluetooth Phone Menu screen appears.
,
Phone Menu
The Phone Menu screen is the main menu of the Bluetooth feature. The
following Phone Menu screen shows Bluetooth Off with no paired phone.
Bluetooth Off (No Phone)
Touch
to
exit to Quick
Menu.
Pairing a Bluetooth Phone
Your mobile phone needs to be paired or registered to TRAX436 to use the
Bluetooth feature. Touch
and then touch
.
Bluetooth On (No Phone)
Page 116
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Paired Device (No Phone)
No Paired
Devices are
currently
listed
Touch
to search for
Bluetooth
devices.
Make sure the
Bluetooth on your
phone is enabled.
Touch
to begin search
TRAX436 will search for and list nearby Bluetooth devices.
Touch to select
the desired
Bluetooth
device.
Page 117
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Touch
to initiate
connection with
Bluetooth device.
About to connect
to your phone
for the first time.
If your phone
requires you
to specify a
password, enter:
1234
You should set up your phone to allow connecting to your navigator
automatically in the future. See your phone manual for more details.
Pairing is finished.
Touch
to exit the pairing procedure.
Page 118
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Managing Bluetooth Devices
Bluetooth Off
Touch to
turn BT on
Bluetooth On (Disconnected)
Touch to
Connect to
paired device
(Bluetooth
mobile phone)
You may have multiple phones set up for connection with your TRAX436.
Bluetooth Off (Connected)
Below is the typical display when Bluetooth on your mobile is set to connect
automatically.
Bluetooth On (Connected)
Page 119
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Paired Devices Screen
You can add and remove phones from your list and disconnect and connect
to different phones using the List Screen. If you have phones already paired
to the TRAX436, but have none of them currently connected, the following
screen appears when you touch
from the Main Menu.
This screen allows you to connect to a device, add devices, and remove
devices.
Paired Devices
Touch to
Select Phone
delete selected
device from
paired list.
Page 120
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Answering a Bluetooth Call
When a
Bluetooth call
is received
the name and
number is
Touch
to
accept the call
and begin talk.
displayed.
Touch
to cancel
incoming call.
Phone Menu (Talk)
Touch
end call.
to
Touch
talk on phone
to
Phone Menu (Talk on Phone)
Touch
to
talk on phone
Page 121
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Making a Bluetooth Call (from Dial Pad)
To make a Bluetooth call touch the following buttons from the Map screen.
,
,
.
Phone Menu (Talk)
1. i) Input
phone
number
1. ii) Touch to
delete digit
2. Touch to call
Phone Menu (Talk)
3. Touch to
end call
2. ii) Touch to
mote call
Page 122
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Making a Bluetooth Call (from PhoneBook)
Add to Phonebook
Touch
to open Phonebook list.
If the phonebook is empty tap
phone.
to download phonebook from paired
Phonebook Empty
Touch to add Phonebook
from Mobile Phone
Dial from Phonebook
Phonebook Downloaded
Select Name
Touch
,
to scroll down the
phonebook list.
Page 123
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Touch name
to select. If a
name entry
has multiple
numbers
Touch
,
to sort the list by
first name (F) or
last name (L).
then these
will display.
Name w/multiple number
Touch phone
number to
begin call.
Making Call
Making a Bluetooth Call (from Call Log)
Call Log
Touch
to open Call Log list.
If the call log is empty TRAX436 will download the call log from the paired
phone.
Page 124
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
Touch to
select call
log. The
details of
the selected
logged call
will display.
Answered Call
Making Call
Dialled Call
Touch
to cancel call.
Missed Call
Touch
to begin call.
Page 125
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
6: Glossary
2D/3D GPS reception
The GPS receiver uses satellite signals to calculate its (your) position and
need at least four signals to give a three-dimensional position, including
elevation. Because the satellites are moving and because objects can
block the signals, your GPS device might not receive four signals. If three
satellites are available, the receiver can calculate the horizontal GPS
position but the accuracy is lower and the GPS device does not give you
elevation data: only 2D reception is possible.
Active route
The currently navigated route. You can save and load routes in TRAX436,
but only one route can be active at any given time, and it is always active
until you delete it, reach your destination or you quit TRAX436. See also:
Route.
City Centre
The City Centre is not the geometric centre of the settlement but an
arbitrary point the map creators have chosen. In towns and villages, it is
usually the most important intersection; in larger cities, it is an important
intersection.
GPS accuracy
Several factors have impact on the deviation between your real position
and the one given by the GPS device. For example, signal delay in the
ionosphere or reflecting objects near the GPS device have a different
and varying impact on how accurately the GPS device can calculate your
position.
Map
TRAX436 works with digital maps which are not simply the computerised
versions of traditional paper maps. Similarly to the paper road maps, the
2D mode of digital maps show you streets, roads, and elevation is also
shown by colours. In 3D mode, you can see the altitude differences, for
example valleys, mountains and elevated roads.
You can use digital maps interactively: you can zoom in and out (increase
or decrease the scale), you can tilt them up and down, and turn them
left and right. In GPS-supported navigation, digital maps facilitate route
planning.
Page 126
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use It?
North-up map orientation
In North-up mode the map is rotated so its top always faces North. This
is the orientation in 2D map view mode and in Overview mode. See also:
Track-up map orientation.
Overview mode
You can instruct TRAX436 to automatically switch to Overview mode if the
next route event is in a distance. In Overview mode the map is shown in
2D but scaled down to a predefined zoom level. When you approach the
next route event, the previous 2D or 3D map view returns automatically.
Route
A series of destinations to be reached one after the other. A simple route
contains one start point and only one destination. Multi-point routes
contain one or more via points (intermediate destinations). The last route
point is the final destination and the route is cut into different legs (from
one destination to the next).
Scheme
TRAX436 comes with different colour schemes for the map for daytime or
night use. Schemes are custom graphic settings for the map and they can
have different colours for streets, blocks or surface waters in 2D and 3D
modes, and they display shades or shadows in different ways in 3D mode.
One daytime scheme and one night scheme is always selected. TRAX436
uses them when it switches from day to night and back.
Track-up map orientation
In Track-up mode the map is rotated so its top always points in the currend
driving direction. This is the default orientation in 3D map view mode. See
also: North-up map orientation.
Road Safety Camera
A special POI type for speed cameras and red light cameras. Different
data sources are available, and you can also mark the position of a Road
Safety Camera on the map.
You can configure TRAX436 to warn you when you approach one of these
cameras.
Page 127
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Page 128
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Page 129
Download from Www.Somanuals.com. All Manuals Search And Download.
UNIDEN TRAX436 IN CAR NAVIGATION
Limited One Year Warranty
Please keep your sales docket as it provides evidence of
warranty.
NOTE
Important: Evidence of original purchase is required for warranty service.
Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498
Uniden New Zealand Limited
Warranty is only valid in the original country of purchase.
ELEMENT OF WARRANTY: Uniden warrants to the original retail owner
for the duration of this warranty, its TRAX436 (herein after referred to as
the Product), to be free from defects in materials and craftsmanship with
only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only,
shall terminate and be of no further effect ONE (1) year after the date of
original retail sale. This warranty will be deemed invalid if the product is;
(A) Damaged or not maintained as reasonable and
necessary,
(B) Modified, altered or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden,
(C) Improperly installed,
(D) Repaired by someone other than an authorized Uniden
Repair Agent for a defect or malfunction covered by this
warranty,
(E) Used in conjunction with any equipment or parts or as
part of a system not manufactured by Uniden, or
(F) Where the Serial Number label of the product has been
removed or damaged beyond recognition.
Warranty only valid in the country of original retail/sale.
Page 130
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS COVERED: This warranty covers for one (1) year, the Product and
included accessories.
STATEMENT OF REMEDY: In the event that the Product does not
conform to this warranty at any time while this warranty is in effect, the
warrantor at its discretion, will repair the defect or replace the Product
and return it to you without charge for parts or service. This warranty does
not provide for reimbursement or payment of incidental or consequential
damages.
This EXPRESS WARRANTY is in addition to and does not in any
way affect your rights under the TRADE PRACTICES ACT 1974 (Cth)
(Australia) or the CONSUMER GUARANTEES ACT (New Zealand).
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: In
the event that the product does not conform to this warranty, the Product
should be shipped or delivered, freight pre-paid, with evidence of original
purchase (e.g. a copy of the sales docket), to the warrantor at:
UNIDEN AUSTRALIA PTY
LIMITED
UNIDEN NEW ZEALAND
LIMITED
Service Division
Service Division
345 Princes Highway,
Rockdale, NSW 2216
Fax (02) 9599 3278
150 Harris Road,
East Tamaki, Auckland
Fax (09) 274 4253
www.uniden.com.au
www.uniden.co.nz
Page 131
Download from Www.Somanuals.com. All Manuals Search And Download.
ThANk yoU for bUyINg A UNIdeN prodUCT.
© 2008 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China.
USZZ01216ZZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
|