UIP 160P
SERIES
OWNER'S
MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Welcome/Features/Terminology
Controls & Functions
2
5
Phonebook (Storing Phone Numbers,
Names, Distinctive Rings and Speed Dial)
Chain Dialing
38
39
40
42
43
43
44
45
46
47
48
49
49
51
51
53
54
55
56
56
57
58
59
60
64
64
64
65
65
66
67
68
69
70
71
Setting up the Phone
7
Safety Recommendations
Before You Start!
7
Steps for Entering Names and Special Characters
Making Calls Using the Phonebook
Speed Dialing
Install the rechargeable battery pack into the handset
Expanding Your Phone
Ten Handset Expandability
Backwards/Forwards Compatibility
Connecting the Expansion Handset Charger
Register the Handset
12
13
13
13
13
14
16
16
17
18
19
20
20
20
28
30
30
30
31
32
32
33
34
34
35
35
35
36
36
37
37
Editing or Erasing a Phonebook Entry
Copying Phonebook Entries
Caller ID and CIDCW (Caller ID on Call Waiting)
Viewing the Caller ID List
Deleting a Caller ID Record
Deleting All Caller ID names/numbers
Using the Caller ID Message List
Multi-Handset Features
Using the DirectLInk Two-Way Radio Feature
Using the Room/Baby Monitor
Using the Intercom
Installing the Beltclip
Headset Installation
Display and Icons
Soft Key Function
Main Menu Options
Setting Menu Options
Using the interface
Handset Setup
Transferring a Call
Global Setup
Troubleshooting
Getting Help
Installation Troubleshooting
Resetting the UIP160P
Logging into the UIP160P
Common Issues
Note on Power Sources
Battery replacement and handling
Power Failure
Battery Life
Cleaning the battery charging contacts
General Information
Liquid Damage
Precautions & Warranty
I.C. Notice
Index
Main Menu Flow Chart
Using Your Phone
Calling with Packet8 service
Using the Speakerphone
Making and Receiving Calls
Call Waiting
Placing a Call on Hold
Redialing a Call
Adjusting the Earpiece and Speaker Volume
Temporarily Muting the Ringer
Mute Microphone
Privacy Mode
Traveling Out of Range
Conferencing
Find Handset
Using One Touch Voice Mail Access
Resetting the New Message LED
w w w . u n i d e n . c o m
[ 1 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
With the UIP160P voice-over-Internet Protocol (VoIP) telephone, Packet8 VoIP service
and your broadband connection, you can access the Internet and make phone calls
simultaneously. The UIP160P can connect directly to your broadband modem or can
connect to a router or switch in your home network. It generates and receives voice
data and forwards data traffic to your computer or network.
Welcome
Features
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes.
• 5.8GHz Digital Expandable
• 10 Multi-Handset Expandability
• Hands-Free Duplex Speakerphone in the Handset
• Caller ID (subscribe through local telephone company)
• 100 programmable Memory Locations
• Trilingual Display Options (English, French and Spanish)
• Intercom/Call Transfer Between Handsets
• 20 Distinctive Ring Options (10 ringer tones and 10 melody ringers)
• Mute and Hold Features
• DirectLink™ Mode
• Room/Baby Monitoring
• Battery Level Indicator
• Clock Display
• Animation Displays
w w w . u n i d e n . c o m
W E L C O M E / F E A T U R E S / T E R M I N O L O G Y [ 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
This series features AutoTalk™ and AutoStandby™. AutoTalk allows you to answer a call by just removing
the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to
hang up by simply returning the handset to the cradle.
To protect you against mis-billed calls that might result from your phone being activated by other
equipment, this series has Random Code™ digital security, which automatically selects one of more than
10,000,000 digital security codes for the handset and base.
Digital Spread Spectrum Technology uses a wider frequency band than standard digital transmissions. The
result is a more secure conversation with the clarity of digital sound, extended range, and minimal
interference from other cordless phones.
IntegriSound™ Built in sound quality which provides life-like conversations.
With DirectLink™ mode, you can use 2 or more handsets as radio transceivers (walkie-talkies).
®
Uniden is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, DirectLink, IntegriSound, and Random Code are trademarks of Uniden America.
Accessibility
If you have a disability and need customer service assistance or if you have any questions about how
Uniden's products can accommodate persons with disabilities, please call the accessibility voice/TTY line:
1-800-874-9314
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a
the "Accessibility" link.
[ 3 ] W E L C O M E / F E A T U R E S / T E R M I N O L O G Y
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Terminology
• Standby Mode - The handset maybe sitting or off the cradle, but is NOT in use. talk/flash or
has not been
pressed.
• Talk Mode -
The handset is off the cradle and talk/flash or
has been pressed, and enabling a dial tone.
• VoIP -
Voice over Internet Protocol, a method of sending voice signals over broadband Internet
connections.
The main base or any registered handset.
• Station -
• Configuration
utility -
The internal user interface that allows you to change configurations settings in the UIP160P. You
can access the configuration utility with an Internet web browser.
w w w . u n i d e n . c o m
W E L C O M E / F E A T U R E S / T E R M I N O L O G Y [ 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Functions
1. Handset Antenna
1
2. Beltclip Hole
5
6
3. Speakerphone Speaker and Ringer
4. Handset Battery Compartment
5. New Message LED
6. Handset Earpiece
7. LCD Display
14
2
7
3
8. soft Keys (P. 18)
9. cid/vol/ (volume up) (P. 47, 34 & 20)
8
9
15
16
17
10.redial/p/vol/
(volume down) (P. 33, 31, 34 & 20)
10
11. /tone/< (P. 40)
*
12.
4
13. (speaker) (P. 30)
14.intcom (intercom)/hold (P. 54 & 32)
15.Headset Jack Cover
16.talk/flash (P. 31 & 32)
17.end (P. 31)
18. (phonebook) (P. 38)
19.#/> (P. 41)
11
12
13
18
19
20
21
20.
(message)/conf (conferencing) (P. 37)
21.Handset Microphone
22.Handset Charging Contacts
[ 5 ] C O N T R O L S & F U N C T I O N S
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
23. Base Charging Contacts
24. Base Antenna
25. Charge LED
26. find hs (handset) (P. 36)
27. pwr (power) LED
28. link LED
29. lan LED
30. wan LED
31. phone LED
32. POWER port
33. RESET switch
34. INTERNET (WAN) port
35. ETHERNET (LAN) port
36. PHONE port
w w w . u n i d e n . c o m
C O N T R O L S & F U N C T I O N S [ 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Phone
Safety Recommendations
To ensure general safety, follow these guidelines:
• Do not open or disassemble this product.
• Do not expose the product to moisture.
• Do not perform any action that creates a potential hazard to people or makes the
equipment unsafe.
• Ultimate disposal of this product should be handled according to all national laws and
regulations.
• Do not touch the wires on the cable ports or the wires of cables connected to a port as
hazardous voltage may be present on these wires when the equipment is powered on.
• The plug-socket combination must be accessible at all times because it serves as the power
disconnect.
• To avoid electric shock, do not connect the UIP160P to any RJ-11 telephone wall jacks.
This could damage the UIP160P or the telephone wiring in the building.
• Do not work on the system or connect or disconnect cables if lightning or thunder are
present in your area.
• Do not cover or block the air vents on the UIP160P. Overheating can cause permanent
damage to the unit.
• Read the instructions completely before connecting the system to its power source.
[ 7 ] S E T T I N G U P T H E P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
911 Service Notice
Packet8 offers Enhanced 911 calling as a standard feature of its Internet phone
service. However, there are certain circumstances, when you dial 911 from a phone
connected to the Packet8 service, where E911 service may not function, or the E911
service may be in some way limited by comparison to traditional 911 service. Please
note
If you ordered your
UIP160P directly from
Packet8, it will already
be activated for you.
Your 10-digit activation
code was in the
confirmation email you
received when your
UIP160P shipped. (If
you don’t have this
email, go to
Before You Start!
MAC address ID found on the bottom of your UIP160P. After you activate the
UIP160P, you will receive an email containing a 10-digit activation code. You will
need this activation code in Step 3.
enter the email address
and password used to
create the account in
the account sign in
page.)
STEP 1: Check Your Equipment
Check your broadband setup and the other equipment you will need:
• A broadband modem and a broadband Internet connection
• A computer with an Ethernet port (or a local Ethernet switch or router)
• One CAT-5 Ethernet cable
• The Packet8 10-digit activation code that was emailed to you when you created your
and password used to create the account in the account sign in at the top of the screen.)
• If you want to use an analog phone or fax machine with the UIP160P, you will need a
standard telephone cable (RJ-11).
w w w . u n i d e n . c o m
S E T T I N G U P T H E P H O N E [ 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Check Your Broadband Configuration
The UIP160P supports the two most common broadband connection protocols:
DHCP and PPPoE. If your broadband connection uses DHCP, you do not need to
change any settings on the UIP160P. If your broadband connection uses PPPoE, you
will need to enter your user name and password in step 3. If your broadband
provider has given you a static IP address, you will need to enter that information
in the UIP160P.
configuring your UIP160P.
STEP 2: Connect Your UIP160P
Once your account is set up, you
can connect your UIP160P.
1) Use the included Ethernet cable to
connect your broadband modem to
the RJ-45 port labeled WAN.
If you use a switch or a router for
your local network, then you can
connect it to the WAN port instead.
[ 9 ] S E T T I N G U P T H E P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
2) Use another Ethernet cable to connect your PC to the
RJ-45 port labeled LAN.
note
PHONE is not a separate
line. Any phone
connected to PHONE will
share your VoIP line
with all the UIP160P's
cordless handsets.
3) OPTIONAL: If you have a second phone you want to use
connect it to RJ-11 port labeled PHONE.
CAUTION
Do not connect the UIP160P to a regular telephone
wall jack.
4) Use the included AC adapter to connect the
POWER port to a 100-240 Vac continuous
power outlet.
CAUTION
To avoid risk of fire or electrical hazard,
use ONLY the included AC adapter!
w w w . u n i d e n . c o m
S E T T I N G U P T H E P H O N E [ 1 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
All the LEDs will flash several times, and the PWR LED will remain on. If the
UIP160P was properly recognized by Packet8's network, the link LED will remain on.
Test your connection by making a call with the handset and browsing to a web page
from your PC. If you have any difficulty, see the Troubleshooting section.
configuring your UIP160P.
Step 3 Activate your Packet8 Service
Once you have connected your UIP160P, you can activate your Packet8 service
• You will need your 10-digit activation code that was sent to you by email when your
signing in at your account page.)
• Pick up your telephone handset and dial the Activation Service number **012-0001.
• Follow the voice instructions and enter your 10-digit activation code.
• When you enter a valid code, your account will be activated and your Packet8 phone
number will be emailed to you. This Packet8 phone number can also be found in your
[ 1 1 ] S E T T I N G U P T H E P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Install the rechargeable battery pack into the handset
note
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
•
•
Use only the Uniden (BT-
446) rechargeable battery
pack supplied with your
cordless telephone.
2) Plug the battery pack connector (red & black wires) into
the jack inside the battery compartment. (The connector
notches fit into the grooves of the jack only one way.)
Match the wire colors to the polarity label in the battery
compartment, connect the battery and listen for a click to
insure connection.
Replacement battery packs
are also available through
the Uniden Parts
Department (see back cover
page).
3) Make sure you have a good connection by slightly pulling
on the battery wires. If the connection is secure, the
battery jack will remain in place.
4) Place the battery case cover back on the handset and slide
it upwards until it clicks into place.
5) Place the handset in the base with the keypad facing
forward.
6) Make sure that the charge LED illuminates. If the LED does
not illuminate, check to see that the AC adapter is plugged
in and the handset makes good contact with the base
charging contacts.
7) Charge the handset battery pack for at least 15-20 hours before using your new cordless
handset for the first time.
w w w . u n i d e n . c o m
S E T T I N G U P T H E P H O N E [ 1 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Expanding Your Phone
Ten Handset Expandability
10 Handsets
Your phone supports up to ten handsets,
including any handsets supplied with your
phone. Expansion handsets can be placed
anywhere AC power is available to connect the
handset charger. Up to 2 handsets can be used
in DirectLink Mode or on an intercom call
without interfering with incoming calls. You can also have a 3-way conference
among 2 handsets and an outside line. All handsets ring when a call is received.
Backwards/Forwards Compatibility
Your phone is compatible with other Uniden 5.8GHz Digital Expandable Handsets.
Compatible models include the TCX805, TCX400, TCX440, and ELX500. (Please check
series.)
Connecting the Expansion Handset
Charger
note
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
keypad facing forward. (See “Install the
rechargeable battery pack into the handset”
on page 12.)
Charge the handset
battery pack for at least
15-20 hours before
using your new cordless
telephone for the first
time.
[ 1 3 ] E X P A N D I N G Y O U R P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Register the Handset
Expansion handsets must be registered to the base before you can use them.
Only one handset can be registered at a time.
note
Handsets supplied with the phone are registered to the base by the factory. When
you register an extra handset to the base, the handset ID will be assigned.
•An extra handset can
be registered when the
main base is in
standby mode.
Before an expansion handset is registered, the battery pack MUST be charged for 15
hours.
•If a handset has ever
been registered to a
different base, you
must de-register the
handset before you can
register it to the new
base (see page 15).
Register the expansion handset to main base
To register TCX805, simply place it in the main base.
While the handset is registering, Handset Registering will appear in the LCD. When
Registration complete. is displayed, the handset has been registered to the base. If
Registration failed. appears, please try these steps again.
To register a ELX500, TCX440, or TCX400 handset, follow the steps below:
1) Disconnect the AC adapter from the main base.
2) While pressing down find handset, reconnect the AC adapter.
3) On the handset, press and hold # until you hear a beep.
While the handset is registering, Handset Registering will appear in the LCD. When
Registration complete. is displayed, the handset has been registered to the base. If
Registration failed. appears, please try these steps again.
w w w . u n i d e n . c o m
E X P A N D I N G Y O U R P H O N E [ 1 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
De-register the Handset
You can deregister the handset's ID from the main base unit or the base ID from the handset. You will
usually only deregister the handset if you want to change the base you use it with, if you are having a
problem with your phone, or if you need to change the digital security code. The digital security code is
an identification code used to connect the handset and the base unit. Normally, setting the code is not
necessary. In the rare situation that you suspect another cordless telephone is using the same security
code, you can change the code by de-registering and reregistering all handsets.
1) In standby mode, press the MENU soft key and select Deregister HS. Then,
ꢀ>GIKUVGTꢀ*5!
;GU
0Q
press the OK soft key. Deregister HS? appears.
2) Press cid/vol/∧ or redial/p/vol/∨ to select Yes and then the OK soft key.
$#%-
&'.'6'
1-
When de-registration is complete you will hear a confirmation tone, and
Deregistration Complete appears.
3) After de-registering the handset, place the handset to the base to register. You must re-register the
handset before you can use it.
[ 1 5 ] E X P A N D I N G Y O U R P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset.
Press down until it clicks.
To remove the beltclip
Pull either side of the beltclip to release the tabs from the holes.
Headset Installation
Your cordless handset may be used with an optional headset.
To use this feature, insert the headset plug into the headset
jack. Your phone is ready for hands-free conversations.
(Headsets may be purchased by calling the Uniden Parts
Department or visiting the web site. See back cover page.)
w w w . u n i d e n . c o m
I N S T A L L I N G T H E B E L T C L I P [ 1 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Display and Icons
Example of the standby mode display
Ringer off icon (when the ringer is off)/ day of the week and time / battery icon
ꢀꢀꢀ570ꢀꢁꢂꢃꢄꢄ#ꢀ
ꢀꢀꢀ*CPFUGVꢀꢅꢁ
ꢀꢀ0GYꢀ%+&ꢃꢁꢄꢄ
/'07
Handset ID and Banner
Number of new Caller ID calls received (If there are no new Caller ID messages,
the Handset ID appears here.)
ICON
Appears During
DESCRIPTION
Battery icons indicate the handset battery status. This icon changes depending on
the battery status (empty, low, medium and full).
Standby/Talk
Standby
Talk
The Ringer off icon indicates that ringer is turned off.
The Mute icon appears when you mute the handset.
The Speaker icon appears when the handset speaker phone is used.
The Privacy icon appears when the Privacy Mode is turned on.
Talk
Talk
[ 1 7 ] D I S P L A Y A N D I C O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Soft Key Function
"Soft" keys are keys that change function during the operation of the phone. There are three soft keys on
each handset. Soft Keys allow you to:
- Access the main menu
- Redial one of the last three numbers dialed from the handset
The function of each soft key is determined by the icon that appears directly above it. For example, when
the handset is in standby mode, pressing soft key 2 will access the main menu. When the handset is in
talk mode, pressing soft key 1 will mute the microphone.
Complete information on the features controlled by the soft keys can be found under each feature.
In standby mode
ꢀꢀꢀ570ꢀꢁꢂꢃꢄꢄ#ꢀ
ꢀꢀꢀ*CPFUGVꢀꢅꢁ
ꢀꢀ0GYꢀ%+&ꢃꢀꢀꢆ
/'07
In talk mode
6CNM
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢄꢃꢄꢄ
/76'
/'07
Soft key 2
Soft key 1 Soft key 2
w w w . u n i d e n . c o m
S O F T K E Y F U N C T I O N [ 1 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Options
note
Your phone has five main menu options: DirectLink Mode, Room Monitor, Handset
Setup, Global Setup and Deregister HS.
•For Global Setup and
Deregister HS menu
options, make sure the
line is not in use and
the handsets are
within range of the
base.
Default Settings
The default settings set from the factory match the features that most people use.
You may not need to change them. The table below lists the default settings.
Function
Default Settings
Function
Day & Time
CW / CWDX
Area Code
Dial Mode
Voice Mail Tone
Default Settings
None
High
Flicker
On
SUN 12:00 AM
Edit Voice Mail
Ringer Volume
Ringer Tone
Distinctive Ring
Auto Talk
•Main menu flow chart
is provided on
page 71.
CW on/CWDX off
None
Tone
On
Off
Off
Anykey Answer
Banner
" "
English
level 5
On
Language
LCD Contrast
Key touch tone
Animation Screen
On
Room Monitor
(allow monitoring)
On
[ 1 9 ] M A I N M E N U O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Setting Menu Options
Using the interface
Below are some tips for using the software interface on your phone.
• Press the MENU soft key to access the main menu.
• Use cid/vol/∧ and redial/p/vol/∨ to scroll through
options.
• Press the OK soft key to make a selection.
• Press the BACK soft key to return to the previous screen.
• Press end to exit the menu.
&KTGEV.KPMꢀ/QFG
4QQOꢀ/QPKVQT
*CPFUGVꢀ5GVWR
$#%-
$#%-
1-
Handset Setup
The following submenu options must be set separately for each handset.
Selecting a Ringer Volume
You can choose from one of three ringer volumes.
1) Press the MENU soft key. Select the Handset Setup menu, and then the Ringer
Volume submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to select HIGH, LOW,
ꢀ4KPIGTꢀ8QNWOG
or OFF.
*KIJ
&'.'6'
3) Press the OK soft key. You will hear a confirmation
$#%-
1-
tone.
w w w . u n i d e n . c o m
S E T T I N G M E N U O P T I O N S [ 2 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Ringer Tone
Ringer Tone lets you choose from 10 ringer tones or 10 melodies:
- Ringers (Flicker, Clatter, Soft Alert, Wake Up, Light Bug, Beep Boop, Tone Board, Chip
Chop, Party Clap, Reminder)
- Melodies (Beethoven's Symphony #9 [Beethoven9], For Elise [Elise], We Wish You A Merry
Christmas [Merry- Xmas], Home Sweet Home [Hm Swt Hm], Lorri Song #6 [Lorri Song],
When Irish Eyes Are Smiling [Irish Eyes], Aura Lee, Let Me Call You Sweet Heart
[Sweetheart], Star Spangled Banner [Star Spngl], Old MacDonald [Old MacDld])
You must set the ringer tone separately on each handset.
1) Press the MENU soft key. Select the Handset Setup
ꢀꢀ4KPIGTꢀ6QPGU
(NKEMGT
menu, and then the Ringer Tones submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to move the pointer. %NCVVGT
$#%-
&'.'6'
1-
You will hear the ringer or melody as you scroll through
the options.
3) When you reach the ringer tone you want, press the OK soft key. You will hear a
confirmation tone.
[ 2 1 ] S E T T I N G M E N U O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Distinctive Ring Setup
Distinctive Ring allows you to assign a designated ring tone to a stored phonebook
number. When a call is received and the Caller ID information matches the
information in one of the phonebook entries, the phone uses the distinctive ring
assigned to that particular Caller. You can assign distinctive rings to multiple
phonebook entries. Switching the setting to Distinctive Off disables distinctive
ringing: all incoming calls will have a normal ring tone. Switching to Distinctive On
activates all programmed distinctive rings.
1) Press the MENU soft key. Select the Handset Setup
&KUVKPEVKXGꢀ4KPI
1P
menu, and then the Distinctive Ring submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to select On or Off. 1HH
$#%-
&'.'6'
1-
3) Press the OK soft key. You will hear a confirmation
tone.
Setting AutoTalk
AutoTalk allows you to answer the phone simply by removing the handset from the
cradle. You do not have to press any buttons to answer the call.
1) Press the MENU soft key. Select the Handset Setup
ꢀꢀꢀ#WVQꢀ6CNM
1P
1HH
menu and then the AutoTalk submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to select On or Off.
$#%-
&'.'6'
1-
3) Press the OK soft key. You will hear a confirmation
tone.
w w w . u n i d e n . c o m
S E T T I N G M E N U O P T I O N S [ 2 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Anykey Answer
Any Key Answer allows you to answer the phone by pressing any number key, /tone/<,
*
or #/> on the handset.
1) Press the MENU soft key. Select the Handset Setup
ꢀ#P[MG[ꢀ#PUYGT
1P
1HH
menu, and then the Anykey Answer submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to select On or Off.
3) Press the OK soft key. You will hear a confirmation tone.
$#%-
&'.'6'
1-
Setting the True Banner
True Banner lets you customize the name your handset displays.
The name will be displayed on the LCD screen during Standby Mode, Intercom,
Intercom Hold, Room Monitor, DirectLink, and Copy Phonebook operation. The
banner name will be displayed on the receiving handset as well.
1) Press the MENU soft key. Select the Handset Setup
ꢀꢀꢀꢀꢀ$CPPGT
/QO U2JQPGꢀꢅꢁ
AAAAAAAAAA
menu, and then the Banner submenu.
2) Use the number keypad (0-9), /tone/<, #/>, or the
*
$#%-
&'.'6'
1-
DELETE soft key to enter or edit the name.
3) Press the OK soft key. You will hear a confirmation
tone.
[ 2 3 ] S E T T I N G M E N U O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Selecting a Language
You can change which language the menu display will use. Choose from English,
French, or Spanish.
1) Press the MENU soft key. Select the Handset Setup
ꢀꢀꢀꢀ.CPIWCIG
'PINKUJ
(TCP㩟CKU
$#%-
menu, and then the Language submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to choose English,
1-
Fran ﾕ ais (French), or Espa ﾂ ol (Spanish).
3) Press the OK soft key. You will hear a confirmation
tone.
Adjusting the LCD Contrast
Contrast adjusts the handset LCD brightness. Choose one of the 10 levels for
optimum viewing.
1) Press the MENU soft key. Select the Handset Setup
ꢀꢀ.%&ꢀ%QPVTCUV
ꢀꢀꢇꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢈ
menu and then the LCD Contrast submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to adjust the
contrast of the LCD (10 levels.)
$#%-
1-
3) Press the OK soft key. You will hear a confirmation tone.
w w w . u n i d e n . c o m
S E T T I N G M E N U O P T I O N S [ 2 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Key Touch Tone
Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn
this tone on or off.
1) Press the MENU soft key. Select the Handset Setup
ꢀ-G[ꢀ6QWEJꢀ6QPG
1P
menu and then the Key Touch Tone submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to select On or Off. 1HH
$#%-
&'.'6'
1-
3) Press the OK soft key. You will hear a confirmation
tone.
[ 2 5 ] S E T T I N G M E N U O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Setting the Animation Screen
The Animation screen displays animation on the handset
LCD. The animations will be displayed on the LCD screen
during a call, ringer volume setting, when you hang up,
and so on.
ꢀ4KPIGTꢀ8QNWOG
$#%-
1-
1) Press the MENU soft key. Select the Handset Setup
menu and then the Animation Screen submenu.
2) Press cid/vol/∧ or redial/p/vol/∨ to select On or Off.
3) Press the OK soft key. You will hear a confirmation
tone.
#PKOCVKQPꢀ5ETGGP
1P
1HH
$#%-
&'.'6'
1-
w w w . u n i d e n . c o m
S E T T I N G M E N U O P T I O N S [ 2 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
The handsets have a variety of animation displays. Below are examples of the animation screens and
what they mean:
Turning on the phone
Hanging up the phone
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢁꢃꢆꢋ
Confirmation (Done!)
Deleting (Deleted!)
ꢀꢀꢀ9GNEQOGꢉ
ꢀꢀꢀꢀꢀꢀ'PF
ꢀꢀꢀꢀꢀꢀ&QPGꢉ
ꢀꢀꢀꢀ&GNGVGFꢉ
ꢀ2NGCUGꢀ9CKVꢊꢊꢊ
/'07
Find Handset/
Paging the Handset
Also, the animation display changes depending on the ringer volume setting.
ꢀ4KPIGTꢀ8QNWOG ꢀ4KPIGTꢀ8QNWOG ꢀ4KPIGTꢀ8QNWOG
ꢀꢀꢀꢀꢀ2CIKPI
?
$#%-
1-
$#%-
1-
$#%-
1-
Out of Range
ꢀꢀ1WVꢀ1Hꢀ4CPIG
Unavailable
ꢀꢀ7PCXCKNCDNG
Low Battery
ꢀꢀ.QYꢀ$CVVGT[
/'07
/'07
[ 2 7 ] S E T T I N G M E N U O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Global Setup
If you change one of the global settings, you change that setting for all registered
handsets. Only one handset can change global settings at a time.
note
Setting Day and Time
Day & Time sets the day and time of your display.
If you do not press a key
for two minutes, the
phone will return to
standby.
1) Press the MENU soft key. Select the Global Setup
ꢀꢀꢀ&C[ꢀꢌꢀ6KOG
ꢀꢀ/10ꢀꢁꢂꢃꢄꢄꢀ#/
menu, and then the Day & Time submenu option.
2) Press cid/vol/∧ or redial/p/vol/∨ to select the day of ꢀꢀꢀꢀꢀ=ꢀꢍꢀ?
$#%-
5#8'
the week, and then the → soft key.
3) Press cid/vol/∧ or redial/p/vol/∨ to set hour, and then press the → soft key.
4) Press cid/vol/∧ or redial/p/vol/∨ to set minute, and then press the → soft key.
5) Press cid/vol/∧ or redial/p/vol/∨ to choose AM or PM, and then press the SAVE
soft key. You will hear a confirmation tone.
w w w . u n i d e n . c o m
S E T T I N G M E N U O P T I O N S [ 2 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting CIDCW (Caller ID on Call Waiting)
CIDCW sets the Caller ID on Call Waiting (CIDCW) displays the name and number of
an incoming call while you are on the line.
note
1) Press the MENU soft key. Select the Global Setup
ꢀꢀꢀꢀꢀ%+&%9
%9ꢀ1Pꢀꢍ%9&:ꢀ1P
•Call Waiting Deluxe
(CWDX) may not be
supported by your
menu, and then the CIDCW submenu.
%9ꢀ1Pꢀꢍ%9&:ꢀ1HH
$#%-
2) Press cid/vol/∧ or redial/p/vol/∨ to select CW On/
&'.'6'
1-
phone service provider.
CWDX On, CW On/CWDX Off, or CW Off/CWDX Off, and then
press the OK soft key. You will hear a confirmation tone.
•If the area code
already been stored in
memory, the stored
area code will be
displayed. To change
it, use the DELETE soft
key and number keys
to enter the new area
code.
Setting the Area Code
If you enter a 3-digit area code number in the Area Code option, your local area
code does not appear in the Caller ID message. For calls received from outside your
local area code, you will see a full 10-digit number.
If your calling area requires 10-digit dialing, do not program this option.
1) Press the MENU soft key. Select the Global Setup
ꢀꢀꢀ#TGCꢀ%QFG
㨫AA
menu, and then the Area Code submenu.
2) Press the number keypad (0-9) to enter a 3-digit area
$#%-
&'.'6'
1-
code.
3) Press the OK soft key. You will hear a confirmation tone.
[ 2 9 ] S E T T I N G M E N U O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Using Your Phone
note
Calling with Packet8 service
• To call anywhere in the world, dial: country code + area code + number. For example, the
country code for the U.S. and Canada is "1." To call anywhere within the US or Canada,
dial: 1 + area code + number
For maximum range:
•Keep the antenna free
of obstruction.
• Anyone can call you at your Packet8 phone number.
•When the handset is
not in use place it in
an upright position.
•Do not hold the
Using the Speakerphone
handset where you
would block the signal.
With the handset's duplex speakerphone, you can have hands-free
conversations.
The icon appears on the display screen during hands-free
conversations.
You can easily switch a call from normal conversation to
Correct
hands-free conversation. To switch a call, press
call.
during the
6CNMꢀ
Incorrect
ꢄꢃꢄꢄꢀ
•Metal and reinforced
concrete may affect
cordless telephone
performance.
/76'
/'07
•For best performance
talk alternately with
the caller in a quiet
room. You can decrease
the speaker volume if
you or the other party
has difficulty hearing.
w w w . u n i d e n . c o m
U S I N G Y O U R P H O N E [ 3 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Receiving Calls
From the Handset
note
Normal
Speakerphone
Remove the handset from the cradle.
1) Press
2) Listen for the dial tone.
3) Dial the number.
OR
Remove the handset from the cradle.
1) Press talk/flash.
.
•To set "AutoTalk", see
page 22 or to set
"Anykey Answer" see
page 23.
2) Listen for the dial tone.
3) Dial the number.
To make a call
OR
Dial the number, and then press talk/flash.
Dial the number, and then press
.
•The handset
Pick up the handset and press talk/flash.
(If Auto-talk is ON, the phone will automatically
answer when you remove the handset from the
cradle.)
Pick up the handset and press
.
microphone is located
at the bottom of the
handset (see "Controls
and Functions" on
page 5). Position
(If Auto-talk is ON, the phone will automatically
answer when you remove the handset from the
cradle.)
To answer a call
To hang up
When you dial the number in standby mode, press redial/p/vol/∨.
To enter a pause within
the dialing sequence
yourself as near to the
handset as possible
and speak clearly.
P
appears in the display, which represents a pause.
•If the line is in use by
another handset(s),
"
InUse" appears
in the display of all
registered handsets
that are not in use.
[ 3 1 ] U S I N G Y O U R P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Call Waiting
If a call waiting tone sounds while you are on a call,
press talk/flash on the handset to accept the waiting
call. There is a short pause, and then you will hear the
new caller. To return to the original caller, press talk/
flash again.
note
While a call is on
hold, CIDCW can not
be received.
Placing a Call on Hold
You can place a call on hold for 5 minutes. When 5 minutes has passed, the call is
disconnected, and the phone returns to standby mode.
1) During a call, press intcom/hold. The call will be put
*QNFꢎVQꢀVTCPUHGT
*CPFUGVꢀꢀꢀꢀꢅꢂ
*CPFUGVꢀꢀꢀꢀꢅꢋ
1-
on hold.
If you leave a call on hold for more than 10 seconds, the
display screen will read,
.
Hold
2) To talk to the caller, press talk/flash or
on a handset. The phone will return
back to the call.
w w w . u n i d e n . c o m
U S I N G Y O U R P H O N E [ 3 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Redialing a Call
The last three phone numbers dialed can be quickly redialed from the handset.
Redial numbers stored in the handset are independent from each other.
note
1) With the phone in standby mode, press redial/p/vol/∨.
2) Press cid/vol/∧ or redial/p/vol/∨ to scroll through the last three dialed
numbers.
•If the number exceeds
32 digits, only the first
32 digits are retained
in redial memory.
3) Press talk/flash or
on the handset. The selected number is dialed.
4) To hang up, press end.
•If the redial memory is
empty, you will hear a
beep.
You can also display the redial list with the handset in talk mode. Press the MENU
soft key, then select the redial menu. Press cid/vol/∧ or redial/p/vol/∨ to select
the number you want to dial. Press the DIAL soft key to redial the number.
Deleting a Redial Record
1) With the phone in standby mode, press redial/p/vol/∨. &GNGVGꢀ4GFKCNꢁ!
2) Press cid/vol/∧ or redial/p/vol/∨ repeatedly to display
;GU
0Q
the number to be deleted.
$#%-
$#%-
1-
3) Press the EDIT soft key.
4) Press cid/vol/∧ or redial/p/vol/∨ to choose Delete? and then press the OK soft
key.
5) Press cid/vol/∧ or redial/p/vol/∨ to choose Yes.
6) Press the OK soft key. The redialed number is deleted.
[ 3 3 ] U S I N G Y O U R P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Storing a Redial Record
1) With the phone in standby mode, press redial/p/vol/∨.
note
2) Press cid/vol/∧ or redial/p/vol/∨ repeatedly to display the number to be stored.
3) Press the EDIT soft key, then select Store into PB?, and then OK soft key.
4) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 38-39.
While charging a
handset, you can not
mute the ringer tone
for the handset.
Adjusting the Earpiece and Speaker Volume
You can select from among six volume levels on the
handset. Pressing the volume up key or volume down
key during a call will change the earpiece or speaker
volume. This setting will remain in effect after the
telephone call has ended.
If you press the volume up key when the earpiece is at
the maximum volume level, an error tone sounds.
The error tone also sounds if you press the volume
down key at the lowest volume.
Temporarily Muting the Ringer
You can mute the ringer individually on a handset. When the phone is ringing, press
end or the MUTE soft key on the handset you want to mute. This mute will last for
the current incoming call only. The ringer tone will return to the previous setting
on the next incoming call.
w w w . u n i d e n . c o m
U S I N G Y O U R P H O N E [ 3 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute Microphone
You can temporarily mute the microphone so that the
caller cannot hear you. Press the MUTE soft key during a
6CNMꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ߦ ꢀꢀꢀꢀꢀ/WVGꢀ1P
ꢀ
call to mute the microphone. Mute On and
appear in the
/76'
/'07
/'07
display. To cancel muting, press the MUTE soft key again.
Mute Off appears.
Privacy Mode
Privacy Mode prevents interruption from other registered handsets. This works only
when the phone is in use.
1) Press the MENU soft key on the handsets during talk mode.
2) Press cid/vol/∧ or redial/p/vol/∨ to select Privacy Mode, and then the OK soft
key.
Privacy Mode On and
Privacy Mode, simply repeat the same steps. Privacy Mode
Off appears.
appear in the display. To exit the
6CNM
2TKXCE[ꢀ/QFGꢀ1P
ꢀ
/76'
/'07
/'07
Traveling Out of Range
During a call, as you begin to move your handset too far from your base unit, noise
may increase. If you pass the range limits of the base unit, you will hear a beep and
see Out of Range on the display, and then the handset returns to standby mode.
[ 3 5 ] U S I N G Y O U R P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Conferencing
If you have more than one handset, the phone permits 3-way conversations
between 2 handsets and an outside line.
note
1) Initiate the call normally. Once the call is in progress, other people can join the
call.
• If someone is using
another handset in
Privacy Mode,
2) To join a conference call, press talk/flash or
to use the handset
System Busy
speakerphone.
Please try later
3) To leave a conference call, simply hang up as you normally would.
All other parties will remain connected.
4) To end a conference call completely, all local parties must hang up. The
conference call will also end when the calling party hang up.
appears in the
display when you
try to join the call.
Find Handset
To locate the handset, press find hs on the base when the phone is in standby
mode. All registered handsets beep for 60 seconds, and Paging appears on the
handset display. To cancel paging, press any key on the handset or find hs on the
base.
• If the battery pack
is completely
drained, the
handset will not
beep when paging.
w w w . u n i d e n . c o m
U S I N G Y O U R P H O N E [ 3 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using One Touch Voice Mail Access
note
The UIP160P provides one-touch access to Packet8's voice mail service. Follow the
steps below to program the Packet8 access number into any handset(s):
1) Press the MENU soft key. Select the Handset Setup menu, and then the Edit Voice
Mail submenu.
The UIP160P's Voice
Mail Tone is already
configured to work with
Packet8's system. Do not
change the Voice Mail
Tone setting.
Edit V_mail No. appears.
2) Enter the Packet8 voice mail access number: 012-0555
3) Press the OK soft key.
To delete the current Voice Mail Access Number, delete all numbers in step2 using
the DELETE soft key and the OK soft key.
When you have messages the New Message LED will flash. To retrieve your messages,
simply press /conf. If you have not entered the access number or it has been
deleted, when you press /conf. No Number Stored Store number in Menu Setup
appears and you will hear a beep. The phone returns to standby mode.
Resetting the New Message LED
If the LED remains on after you’ve retrieved your messages, you may need to reset
the indicators. With the phone is in standby mode, press and hold find hs on the
base until the paging sound stops (about 5 seconds).
[ 3 7 ] U S I N G O N E T O U C H V O I C E M A I L A C C E S S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Phonebook (Storing Phone Numbers, Names,
Distinctive Rings and Speed Dial)
note
You can store names and numbers in your phone's phonebook, search for names
alphabetically, and dial phonebook entries with just a few key presses. You can
store up to 100 numbers in each registered handset.
When the memory is
full, you will hear a
beep and Memory Full
appears.
The phone uses the same memory to store phonebook entries and Caller ID
messages. If the shared memory is already full, the phone will not store any more
phonebook entries. You will have to delete some of the Caller ID messages before
you can store a new phonebook entry.
1) When the phone is in standby mode, press (phonebook).
ꢀꢀ
ꢀꢀꢀ
5GCTEJ=#ꢇ<ꢍ㨲ꢍ㨱
ꢀ
ꢏ2JQPGDQQM
The following items appear:
ꢀ
6QVCNꢃꢁꢄꢄ
?
(2nd line) The number of the phonebook entries used
(3rd line) How to search (press the number keypad, cid/
vol/∧ or redial/p/vol/∨)
%12;
5614'
&'.'6'
(4th line) The COPY, STORE, DELETE soft keys.
2) Press the STORE soft key. Store/Edit Name appears.
3) Enter the name (up to 16 characters) by using the
number keypad (see the "Steps for Entering Names and
Special Characters" on page 40).
5VQTGꢍ'FKVꢀ0COG
/QXKGU
㨫
$#%-
&'.'6'
1-
If a name is not required, go to step 4. <No Name> will be used as the name.
w w w . u n i d e n . c o m
PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL) [ 3 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
4) Press the OK soft key to store the name;
5VQTGꢍ'FKVꢀ0Qꢊ
ꢐꢄꢄꢑꢋꢄꢋꢒꢆꢓ
Store/Edit No. appears.
㨫
note
5) Use the number keypad, /tone/<, or #/> to enter the
*
$#%-
&'.'6'
1-
phone number (up to 20 digits).
If you make an error, use the DELETE soft key to erase the incorrect digits. When
•The pause key counts
as one digit. Pressing
redial/p/vol/∨ more
than once increases the
length of the pause
between numbers. Each
pause represents a 2
seconds delay.
you are finished, press the OK soft key to store the number.
6) Distinctive Ring appears. Press cid/vol/∧ or redial/p/
vol/∨ to move the pointer to one of the Distinctive
Ring options and then press the OK soft key.
7) Speed Dial appears. Press cid/vol/∧ or redial/p/vol/∨
to move the pointer to select the Speed dial location
(10 locations: SPD1-SPD0).
&KUVKPEVKXGꢀ4KPI
0Qꢀ5GNGEVP
(NKEMGT
$#%-
&'.'6'
1-
ꢀꢀꢀ5RGGFꢀ&KCN
0Qꢀ5GNGEVP
52&ꢁꢃꢏ'ORV[
•If you choose not to
store a Distinctive
Ring, simply select the
"No Selectn" option.
8) Press the OK soft key. You will hear a confirmation
tone, and Done! appears in the display.
$#%-
&'.'6'
1-
/QXKGU
ꢐꢄꢄꢇꢑꢋꢄꢇꢋꢒꢆꢓ
ꢀ$GGVJQXGPꢔꢍ52&ꢁ
•If you choose not to
store the name/
number as a Speed
Dial, simply choose the
"No Selectn" option.
'&+6
Chain Dialing
The phonebook entries in the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Store the account number in one of
the phonebook entries (refer to "Phonebook (Storing Phone Numbers, Names,
Distinctive Rings and Speed Dial)" on page 38). When you call your bank and are
prompted to enter the account number, scroll through your phonebook entries until
you find your account number, and then press the DIAL soft key.
[ 3 9 ] PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL)
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Steps for Entering Names and Special Characters
You can use the letters on the number keys to enter special characters. Each time
you press a number key, the phone cycles through the available characters for that
key in the following order: Upper case letters first, lower case letters next and
finally the number corresponding to the key.
Number of times key is pressed
w w w . u n i d e n . c o m
PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL) [ 4 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
For example, to enter Movies:
1) When the phone is in standby mode, press and the STORE soft key. Store/Edit
Name appears.
note
2) Press 6 once, and then press #/> to move the cursor to the right.(“M”)
3) Press 6 six times.(“o”)
If the next character
uses the same number
key, you must press #/>
to move the cursor over.
Otherwise the next time
you press the number
key, it changes the
4) Press 8 six times.(“v”)
5) Press 4 six times.(“i”)
6) Press 3 five times.(“e”)
7) Press 7 eight times.(“s”)
8) When finished, press the OK soft key.
character that was
previously set.
If you make a mistake while entering a name
Use /tone/< or #/> to move the cursor to the incorrect character.
*
Press the DELETE soft key to erase the wrong character, and then enter the correct
character. To delete all characters press and hold the DELETE soft key.
To continue to store the telephone number, proceed to step 5 in "Phonebook
(Storing Phone Numbers, Names, Distinctive Rings, and Speed dial)" on page 39.
[ 4 1 ] PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL)
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Phonebook
Your phone stores names/numbers in the phonebook memory entries, and you can
search names in alphabetical order. You can view the phonebook even while the
phone is in use.
1) Press
.
ꢀꢀ
ꢀꢀꢀ
5GCTEJ=#ꢇ<ꢍ㨲ꢍ㨱
ꢀ
ꢏ2JQPGDQQM
ꢀ
6QVCNꢃꢁꢄꢄ
?
If you recall the phonebook during a call, only the
BACK soft key will appear.
%12;
5614'
&'.'6'
2) Press cid/vol/∧ or redial/p/vol/∨, or the number keypad to scroll through the
phonebook entries. Phonebook entries appear in alphabetical order (from first to
last when you press redial/p/vol/∨, from last to first when you press cid/vol/∧).
You can also use the letters on the number keys to select the first letter of the
desired name. Press a number key (2-9 and 0) once for the first letter, twice for
the second letter, and so on. The first entry that begins with the letter you
entered appears.
For example, to jump to the first phonebook entry starting with the letter M,
press 6 once. Press cid/vol/∧ or redial/p/vol/∨, until the phonebook entry is
displayed.
note
During a call, don't
press end on the
handset or the call will
be disconnected.
3) To finish the viewing operation, press end (or the BACK soft key or talk/flash
during a call).
w w w . u n i d e n . c o m
PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL) [ 4 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
From Standby Mode
1) When the phone is in standby mode, select the
phonebook entry you want to dial (see "Viewing the
Phonebook" on page 42).
/QXKGU
ꢐꢄꢄꢇꢑꢋꢄꢇꢋꢒꢆꢓ
ꢀ$GGVJQXGPꢔꢍ52&ꢁ
'&+6
2) Press talk/flash or
on the handset. The displayed
number is dialed.
3) To hang up, press end (or return the handset to the base).
From Talk Mode
1) Press talk/flash or
.
2) Select the phonebook entry you want to dial (see "Viewing the Phonebook" on
page 42).
3) Press the DIAL soft key. The number in the displayed phonebook location is
dialed.
4) To hang up, press end (or return the handset to the base).
Speed Dialing
If you store a phone number in a speed dial memory location (10 locations: SPD1 -
SPD0), you can use the speed dialing feature. When the phone is in standby mode,
press and hold a number key (0-9) associated with the speed dial until the phone
number appears, and then press talk/flash or . The number stored in the speed
dial (SPD1 - SPD0) is dialed.
[ 4 3 ] PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL)
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing or Erasing a Phonebook Entry
.
ꢀꢀ
ꢀꢀꢀ
ꢀ
ꢏ2JQPGDQQM
6QVCNꢃꢁꢄꢄ
2) Press cid/vol/∧ or redial/p/vol/∨, or the number
keypad to select the phonebook entries (see "Viewing
the Phonebook" on page 42).
ꢀ
5GCTEJꢀ=#ꢇ<ꢍ㨲ꢍ㨱
?
%12;
5614'
&'.'6'
a. Editing the Stored Data
1) When the phonebook entry to be edited appears, press
the EDIT soft key, and then select Edit?. Store/Edit
Name appears.
5VQTGꢍ'FKVꢀ0COG
7PKFGPꢀ%QTR
㨫
$#%-
&'.'6'
1-
2) Follow the steps 3 to 7 under "Phonebook (Storing
Phone Numbers, Names, Distinctive Rings, and Speed Dial)" on page 38-39 to
complete the editing operation.
3) Press the OK soft key. You will hear a confirmation tone.
b. Deleting the Stored Data
1) When the phonebook entry to be deleted appears,
&GNGVGꢀ/GOQT[!
;GU
0Q
press the EDIT soft key, and then select Delete?.
Delete Memory? appears.
2) Press cid/vol/∧ or redial/p/vol/∨ to move the
pointer to Yes.
$#%-
$#%-
1-
3) Press the OK soft key. You hear a confirmation tone.
Deleted! appears in the display.
w w w . u n i d e n . c o m
PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL) [ 4 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Phonebook Entries
Copy Phonebook allows you to transfer stored phonebook entries from handset to
handset so you don’t have to manually re-enter names and numbers. You can transfer
one memory (phonebook entry) at a time, or all memory entries at once.
note
If the memory entry on
the receiving handset is
full, and can not store
the phonebook entries,
you will hear a beep.
1) When the phone is in standby mode, press
.
2) Press the COPY soft key.
3) Press cid/vol/∧ or redial/p/vol/∨, to select the
handset you want transfer the phonebook entries to and
then press the OK soft key.
ꢀ6QꢀYJKEJꢀWPKV!
*CPFUGVꢀꢀꢀꢀꢅꢂ
*CPFUGVꢀꢀꢀꢀꢅꢋ
$#%-
&'.'6'
1-
4) Press cid/vol/∧ or redial/p/vol/∨ to select One Memory
ꢀ%QR[ꢀ2JQPGDQQM
1PGꢀ/GOQT[
#NNꢀ/GOQTKGUꢃZZZ
or All Memories: and then press the OK soft key.
$#%-
&'.'6'
1-
If you select All Memories, Are you sure? appears on the
display screen.
Press cid/vol/∧ or redial/p/vol/∨ to select Yes, and then press the OK soft key.
If you select One Memory, press cid/vol/∧ or redial/p/
6QꢀUGNGEV
RJQPGDQQM
vol/∨, or the number key (2-9 and 0) to select the
RTGUUꢀ=#ꢇ<ꢍ
$#%-
㨲ꢍ
㨱?
phonebook entry you want to export and then press the
COPY soft key.
5) The phonebook entries will be transferred to the
handset. Copying and the receiving handset name appear.
When the transfer is completed Done! appears on the
handset.
%QR[KPI
㨭㨭ꢀ*CPFUGVꢀꢅꢂ
%#0%'.
[ 4 5 ] PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL)
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID and CIDCW (Caller ID on Call Waiting)
note
When the telephone rings, the Caller ID feature allows you to view the caller’s
name, phone number, date and time of call. With CIDCW (Caller ID on Call Waiting),
you will hear a call waiting tone while you are on a call, and the Caller ID data is
displayed. To accept the waiting call, press talk/flash on the handset. Additionally,
you can dial a number stored in the Caller ID list or save data to your phonebook
entries.
•Packet8 service comes
with Caller ID and Call
Waiting.
•If you answer a call
before the Caller ID
message is received
(for example, before
the second ring), the
Caller ID message will
not appear.
Important:
Memory locations for Caller ID messages and Phonebook entries (including Speed
Dials) are common; you can store up to 100 entries for each handset. Caller ID
messages are not stored when you have 100 phonebook entries. When you have
stored a total of 100 phonebook entries and Caller ID messages, the oldest Caller ID
message is overwritten.
•When the call is
received via a
The date and time received
ꢁꢂꢍꢂꢁꢀꢁꢂꢃꢋꢄ2ꢀꢕ
,CPGꢀ5OKVJ
ꢂꢁꢒꢇꢆꢆꢆꢇꢁꢂꢋꢒ
'&+6
telephone company
that does not offer
Caller ID service, the
caller’s phone number
and name does not
appear. (This includes
some international
calls.)
Caller's name
Caller's phone number
1) When the Caller ID message is received, the display shows the caller's phone
number along with the date and time. The incoming call information is stored in
the Caller ID record. If the Caller ID service includes the caller's name, the name
will appear in the display (up to 15 characters).
•When the call is via a
private branch
exchange (PBX), the
caller's phone number
and name may not
appear.
w w w . u n i d e n . c o m
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 4 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
You may receive any one of the following messages:
When invalid data is received; Incomplete Data
When a private name is received; Private Name
When a private number is received; Private Number
When an unknown name is received; Unknown Name
When an unknown number is received; Unknown Number
note
2) When you pick up the phone, the display changes to Talk.
(AutoTalk feature is set to on).
icon appears next
*
to the time to
indicate this is an
unread message.Once
you view the new
Data errors appear as "❚."
message,the icon
Viewing the Caller ID List
*
will disappear.
You can view the Caller ID list through the handset during a call or when the phone
is in standby mode.
1) With the phone in standby mode, press cid/vol/∧.
ꢀꢀꢏ%CNNGTꢀ+&
ꢀꢀꢀ0GYꢀꢀꢃꢀꢆꢄ
With the phone in talk mode, press the MENU soft key.
ꢀꢀꢀ6QVCNꢃꢀꢆꢄ
$#%-
Use cid/vol/∧ and redial/p/vol/∨ to select Caller ID,
&'.'6'
then press the OK soft key.
The summary screen appears. The screen shows the
number of new messages and total messages.
2) To view the Caller ID messages in historical order (from new to old or from old to
new), repeatedly press redial/p/vol/∨ to scroll through the messages from the
latest to the earliest, or cid/vol/∧ to scroll back through the messages.
[ 4 7 ] C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G )
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
To search the Caller ID messages alphabetically, press the number key pad (2-9 and
0) with the letter associated with the first letter of the desired caller.
note
back to historical order (from new to old or from old to new) unless you
exit and re-enter the operation.
•During a call, don't
press end on the
handset or the call will
be disconnected.
3) To finish viewing the Caller ID list, press end (or the BACK soft key or talk/flash
during a call).
•Once the Caller ID data
has been deleted, the
information cannot be
retrieved.
Deleting a Caller ID Record
1) When the phone is in standby mode, navigate to the
&GNGVGꢀ%CNNGTꢀ+&
;GU
0Q
Caller ID information to be deleted (see "Viewing the
Caller ID List" on page 47).
$#%-
$#%-
1-
2) Press the EDIT soft key, then select Delete?. Delete
Caller ID appears.
3) Press cid/vol/∧ or redial/p/vol/∨ to choose Yes.
4) Press the OK soft key. You will hear a confirmation tone.
w w w . u n i d e n . c o m
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 4 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting All Caller ID names/numbers
ꢀꢀꢏ%CNNGTꢀ+&
ꢀꢀꢀ0GYꢀꢀꢃꢀꢆꢄ
ꢀꢀꢀ6QVCNꢃꢀꢆꢄ
$#%-
&'.'6'
2) Press cid/vol/∧ or redial/p/vol/∨ to choose Yes.
&GNGVGꢀ#NN!
;GU
0Q
$#%-
$#%-
1-
3) Press the OK soft key. You will hear a confirmation tone.
Using the Caller ID Message List
Calling a party from the Caller ID list
Standby mode
1) When the phone is in standby mode, select the desired
Caller ID record (see "Viewing the Caller ID List" on page
47).
ꢁꢂꢍꢂꢁꢀꢁꢂꢃꢋꢄ2ꢀꢕ
,CPGꢀ5OKVJ
ꢂꢁꢒꢇꢆꢆꢆꢇꢁꢂꢋꢒ
'&+6
2) To have the phone dial a "1" before the displayed Caller
ID number, press /tone/<. To have the phone dial the stored area code before
*
the displayed Caller ID number, press #/>.
3) Press talk/flash or . The displayed phone number dials automatically.
[ 4 9 ] C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G )
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Talk mode
1) When the phone is in talk mode, select the Caller ID record you want to dial (see
note
"Viewing the Caller ID List" on page 47).
2) Press the DIAL soft key, and the number will be dialed.
•When a long distance call
has been set, "1" appears
in the display.
Storing Caller ID records in the Phonebook
Records shown in the Caller ID list can be stored in the phonebook. The phone
number and name of the party listed on the Caller ID record can be stored in the
phone book without reentry.
1) When the phone is in standby mode, select the Caller ID message to be stored.
Press the EDIT soft key and use volume up/down to select store into PB?, and
then press the OK soft key. Store/Edit Name appears. If the Caller ID message is
already stored in memory, you will hear a beep and This data is already
stored!! appears. The number will not be stored.
•If the Caller ID message
was received as a private/
unknown number, or the
message does not have
the number, you cannot
store the message in the
phonebook. If it was
received as private/
unknown name, the
message will be stored as
<No Name>.
2) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 38-39.
•If all 100 memory entries
are full, the Caller ID
message will be erased
from Caller ID list when
you store it in the
phonebook.
w w w . u n i d e n . c o m
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 5 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Handset Features
note
The features in this section require a minimum of
two handsets to operate. To add additional
handsets to your system, see "Expanding Your
Phone" on page 13.
Handsets can be in
Direct Link mode
while other handsets
are in use.
Using the DirectLInk Two-Way Radio
Feature
With the DirectLink two-way radio feature, a pair of handsets can function as two-
way radios. DirectLink Mode allows two handsets to communicate with each other
without the base unit or a telephone line. Use them at sporting events or while
shopping to stay in contact with family members or friends. You must set both
handsets to DirectLink Mode to activate this feature.
Activating DirectLink Mode
1) Press the MENU soft key and select the DirectLink Mode
6QꢀGPVGT
&KTGEV.KPMꢀOQFG
RTGUUꢀ='06'4?
$#%-
menu. To enter DirectLink mode press [ENTER] appears.
2) Press the ENTER soft key to enter DirectLink mode. You
$#%-
'06'4
will hear a confirmation tone, and DirectLink Mode
Complete appears.
3) To return to normal mode, press the CANCEL soft key
and then the OK soft key, or return the handset to the
cradle.
[ 5 1 ] M U L T I - H A N D S E T F E A T U R E S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Making a DirectLink Call
1) When the phone is in the DirectLink standby mode,
press the DirectLink soft key (example of DirectLink
from handset #1).
ꢀꢀꢀ570ꢀꢁꢂꢃꢄꢄ#
ꢀꢀꢀ*CPFUGVꢀꢅꢁ
&KTGEV.KPMꢀ/QFG
%#0%'.
&KTGEV.KPM
2) Select the handset to which you wish to DirectLink
with by pressing the number keys (0-9). Your handset
will then page the selected handset.
6Qꢀ&KTGEV.KPM
CꢀJCPFUGV
RTGUUꢀ=ꢁꢇꢔꢎꢄ?
$#%-
3) On the receiving handset, press talk/flash, the
&KTGEV.KPM
ꢀꢀꢀ*CPFUGVꢀꢅꢂ
ANSWER soft key, or if Any Key Answer is on, press any
number key, /tone/<, or #/>.
*
'0&
4) When you finish your conversation, press end or the
END soft key on either handset. Return the handset to the cradle, or press the
CANCEL soft key and then the OK soft key to return to normal standby mode
(cancelling DirectLink mode).
w w w . u n i d e n . c o m
M U L T I - H A N D S E T F E A T U R E S [ 5 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Room/Baby Monitor
This feature allows you to monitor
sounds in another room. Place a
handset in the room you wish to
monitor; it will function as a
microphone. A second handset can be
set to function as a remote speaker,
allowing you to monitor sounds in the
room.
note
This feature only
works when the
handset(s) is within
the range of the base.
1) Press the MENU soft key and select
the Room Monitor menu.
2) Select the handset you want to
monitor by using cid/vol/∧ or
redial/p/vol/∨.
3) Press the OK soft key.
/QPKVQTKPI
㨭㨭ꢀ*CPFUGVꢀꢅꢂ
Monitoring appears, and you hear sounds in the room
where the handset is installed.
4) To turn off the Room Monitor, press the END soft key,
or end.
'0&
If you want to prevent other handsets from monitoring this one, press the MENU
soft key. Select the Handset Setup menu, and then the Room Monitor submenu.
Select Off and press the OK soft key.
[ 5 3 ] M U L T I - H A N D S E T F E A T U R E S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Using the Intercom
If you have two or more handsets, you can use them as an intercom.
note
1) In standby mode, press intcom/hold.
2) Select the handset you want to talk with within 30
6QꢀKPVGTEQO
If the party is busy or
out of range, the
handset returns to
standby mode.
seconds. To select the handset, press cid/vol/∧ or
redial/p/vol/∨, and then press the OK soft key. If you
select All, all other handsets will be paged. An
intercom tone sounds.
*CPFUGVꢀꢀꢀꢀꢅꢂ
*CPFUGVꢀꢀꢀꢀꢅꢋ
1-
To cancel intercom, press the CANCEL soft key on the initiating handset.
3) To answer the page, press talk/flash, intcom/hold, or
+PVGTEQO
ꢀꢀꢀ*CPFUGVꢀꢅꢁ
the ANSWER soft key. If Any Key Answer is enabled,
pressing a number key, /tone/<, or #/> will answer
*
#059'4
the page. If AutoTalk is enabled, you can answer the
page by simply picking up the handset.
4) To hang up the intercom call, press end or the END soft key on either handset.
w w w . u n i d e n . c o m
M U L T I - H A N D S E T F E A T U R E S [ 5 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring a Call
You can transfer an outside call to another handset.
note
1) During a call, press intcom/hold on the handset.
2) Select a handset to transfer the call to within 10
seconds.
•If any you receive an
outside/intercom call
or page while selecting
the other handset, the
operation will be
*QNFꢎVQꢀVTCPUHGT
*CPFUGVꢀꢀꢀꢀꢅꢂ
*CPFUGVꢀꢀꢀꢀꢅꢋ
1-
To select the handset, press cid/vol/∧ or redial/p/vol/
∨, and then press the OK soft key. If you select All, all
other handsets will be paged.
cancelled.
The call will automatically be placed on hold, and an intercom tone sounds.
•If the party does not
answer within one
minute, the operation
is cancelled.
To cancel the transfer, press the CANCEL soft key, talk/flash or
on the
initiating handset.
3) To answer the page on a handset, press talk/flash, intcom/hold, or the ANSWER
soft key. If Any Key Answer is enabled, pressing any number key, /tone/<, or #/
*
> will answer the page. If AutoTalk is enabled, you can answer the page by
simply picking up the handset.
4) To speak to the caller, press talk/flash on the receiving handset.
[ 5 5 ] M U L T I - H A N D S E T F E A T U R E S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps
first. If these steps
do not solve your problem, please call our Customer Service Hotline at 1-800-297-
1023. (Mon - Fri 7 am
to 7 pm, Sat/Sun 9 am to 5 pm, CST. The Customer Service Hotline is closed on
holidays.)
Getting Help
If you have trouble connecting to your VoIP Service
support.
If you have questions about using your VoIP service features.
support.
If you have questions on how to use your phone, add extra handsets, program
the phonebook, etc.
Contact Uniden customer service at 800-554-7331, Monday-Friday, 8 am to 5 pm,
and troubleshooting tips.
w w w . u n i d e n . c o m
T R O U B L E S H O O T I N G [ 5 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Troubleshooting
Understanding the LED Indicators
If you're having trouble with your UIP160P, the LEDs on the front panel can help identify the problem.
Figure 1 shows the location of the LEDs, and Table 1 lists the states of the LEDs and what they mean.
Phone
Status
Power
Status
LAN
Status
Call
Link
WAN
Status
Status
LED Statuses and Their Meaning
LED
Power
On
Off
The UIP160P has no power.
Blinking
The UIP160P has power.
NA
NA
The UIP160P has registered with The UIP160P has not resgisted with Packet8
Link
LAN
Packet8.
service.
The UIP160P detects a valid link
on its LAN port.
The UIP160P is receiving data on its
LAN port.
The UIP160P cannot detect a valid link.
[ 5 7 ] T R O U B L E S H O O T I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
LED
On
Off
Blinking
The UIP160P detects a valid link
on its WAN port.
The UIP160P is receiving data on its
WAN port.
WAN
Phone
The UIP160P cannot detect a valid link.
The telephone connected to this
port is in use or off hook.
Fast: There is an incoming call.
Slow: There is a message waiting.
The connected phone is on hook (not in use).
While the UIP160P is downloading a firmware update or a new configuration file from Packet8, the LEDs will
blink several times.
Resetting the UIP160P
There are two ways to reset the UIP160P: a power cycle restarts the unit, and a hard reset restores the
unit to factory defaults.
Power Cycle
Simply unplug the telephone UIP160P and plug it in again. This restarts the UIP160P and reloads the
configuration file.
Hard Reset
A hard reset restores the UIP160P to factory defaults. All configuration changes will be lost.
A: Unplug the UIP160P's AC adapter.
B: Insert a pin or bent-out paper clip into the RESET hole on the rear of the UIP160P and push the reset
button.
C: While holding the reset button pushed in, reconnect the UIP160P's AC adapter.
D: Hold the reset button for ten seconds and then release it. This sets the UIP160P main base back to
factory defaults.
w w w . u n i d e n . c o m
T R O U B L E S H O O T I N G [ 5 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Local Area Reset
Many problems can be solved by resetting all the local network equipment. To perform a local area reset,
first power down all your local equipment: your modem, switch or router, UIP160P and computer. Then,
restore power to the devices one at a time, starting with the one directly connected to the Internet and
working your way down:
If a local area reset does not restore connectivity, see Common Issues below.
Logging into the UIP160P
If you need to configure the UIP160P's router features or check settings while troubleshooting, you can
log into the UIP160P directly from your web browser.
A: Make sure your computer is directly connected to the UIP160P's LAN port.
B: Open an Internet Explorer browser window.
C: In the address line of the browser, type 192.168.88.1 and press ENTER.
D: Enter "admin" in the password field and press ENTER.
[ 5 9 ] T R O U B L E S H O O T I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Common Issues
For Terminal Adapter Features
Scenario
Check to see if...
Then try...
The PWR LED on the UIP160P is off,
or the power LED on your modem is 1) Checking the power connection to the UIP160P, or your modem.
off.
Making sure the cable between the UIP160P and your modem is
The WAN LED on the UIP160P is off
1) Securely connected to the UIP160P's WAN port.
and/or the LAN LED on your modem
2) Securely connected to your modem's LAN port
is off.
3) Free of any frays, loose connectors, or other visible defects
Your UIP160P is
unable to connect to
the Internet.
1) Making sure the UIP160P is configured for DHCP or PPPoE (if your ISP
uses DHCP or PPPoE).
OR
1) Making sure the first three parts of the UIP160P's IP address match you
The UIP160P doesn't have a valid
ISP's IP address and the fourth part is different
IP address. (Login to the UIP160P
2) Making sure UIP160P's subnet mask exactly matches the subnet mask of
and check the WAN Status screen.)
you ISP.
OR
1) Making sure the UIP160P's default gateway address is set to your ISP's IP
address.
w w w . u n i d e n . c o m
T R O U B L E S H O O T I N G [ 6 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Scenario
Check to see if...
Then try...
Making sure the cable between the UIP160P and your computer is
1) Securely connected to the UIP160P's LAN port.
2) Securely connected to your computer's Ethernet card
3) Free of any frays, loose connectors, or other visible defects
The LAN LED on the UIP160P is off
and/or the LINK LED on your
computer's Ethernet card is off.
Your computer doesn't have an IP
address. (In most Windows systems, 1) Making sure your computer is configured for DHCP.
Your computer is
unable to connect to
the Internet.
open a command prompt window
2) Making sure the UIP160P's DHCP Server is enabled.
and enter the command ipconfig.)
1) Making sure the first three parts of your computer's IP address match the
UIP160P's IP address and the fourth part is different
2) Making sure your computer's subnet mask exactly matches the subnet
mask of the UIP160P.
Your computer's IP address and
subnet mask are on a different
network than the UIP160P's.
The UIP160P is not the default
gateway for your computer.
1) Making sure your computer's default gateway address is set to the
UIP160P's IP address.
1) Resetting the UIP160P.
2) Contacting Packt8 to verify the necessary SIP configuration settings.
The CA (call agent) LED is off.
The CA (call agent) LED is on.
Your UIP160P
handset has no dial
tone.
1) Plugging a standard analog phone into the UIP160P's VoIP1 port. If this
works, your UIP160P may be damaged. Contact Uniden customer service.
For Telephone Features
Symptom
Suggestion
• Make sure the AC adapter is plugged into the base or the charger (if you have more than one
handset) and wall outlet.
• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handset are clean.
The charge LED won't illuminate
when the handset is placed in
the cradle.
[ 6 1 ] T R O U B L E S H O O T I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Symptom
Suggestion
• Move the handset and/or base away from metal objects or appliances and try again.
• Make sure that you are not too far from the base.
The audio sounds weak.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, and then reconnect it.
• De-register the handset (see "De-register the Handset" on page 15) and register the handset
(see "Register the Handset" on page 14).
Can't make or receive calls.
• Make sure that you are not too far from the base.
• Make sure the line is not in use.
• If an outside call is already established, you can not make another outside call.
• Charge the batteries in the handset for 15-20 hours by placing the handset on the base or
charging cradle.
• Make sure that you are not too far from the base.
• De-register the handset (see "De-register the Handset" on page 15) and register the handset
(see "Register the Handset" on page 14).
The handset doesn't ring or
receive a page.
• Make sure that another handset(s) is not in use, and try the phone again.
• Make sure that you are not too far from the base.
Unavailable appears in
the display.
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
Severe noise interference.
Caller ID does not display.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Contact your service provider to verify the Caller ID settings. There can be a problem with your
Caller ID service.
w w w . u n i d e n . c o m
T R O U B L E S H O O T I N G [ 6 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
• Charge the battery pack for 15-20 hours.
• De-register the handset (see "De-register the Handset" on page 15) and register the handset
(see "Register the Handset" on page 14).
You cannot register the handset
at the base.
The handset doesn't
communicate with other
handsets.
• De-register the handset (see "De-register the Handset" on page 15) and register the handset
(see "Register the Handset" on page 14).
• Make sure that you have registered all handsets.
The handset can't join the
conversation
• Make sure there are not 2 handsets already using conference feature.
• Make sure that another handset is not in privacy mode.
Room Monitor feature does not
work.
• Make sure to place the handset(s) within the range of the base.
• Call our customer hotline at 1-800-297-1023.
If you still have a problem.
[ 6 3 ] T R O U B L E S H O O T I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Note on Power Sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged, please
replace the battery. With normal usage, your battery should last about one year.
Please contact your place of purchase or the Uniden Parts Department for a
replacement battery.
Warning
To avoid the risk of personal injury or property damage from fire or electrical shock,
only use the Uniden battery model and Uniden adapter model specifically
designated for this product.
Power Failure
During the period that the power is off, you will not be able to make or receive calls
with the telephone.
Caution
•
•
•
•
Use only the specified Uniden battery pack (BT-446).
Do not remove the batteries from the handset to charge them.
Never throw the battery into a fire, disassemble them, or heat them.
Do not remove or damage the battery casing.
w w w . u n i d e n . c o m
N O T E O N P O W E R S O U R C E S [ 6 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Life
With average use, the battery should give you about 5 hours of talk time and 7 days
of standby time. For optimum performance, return the handset to the cradle when it
is not in use.
note
Even when the
battery pack is not
being used, it will
gradually discharge
over a long period of
time. For optimum
performance, be sure
to return the handset
to the base unit after
each telephone call.
Low battery alert
When the battery pack is very low, the phone is programmed to eliminate functions
in order to save power.
The battery pack needs to be charged when:
- The empty battery icon appears.
ꢀꢀ.QYꢀ$CVVGT[
-
Low Battery appears in the display.
If the phone is in standby mode, none of keys will
operate. If you are on a call, complete your conversation as quickly as possible, and
return the handset to the cradle.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the
charging contacts on the handset once a month. Using water
only, dampen a cloth to clean the charging contacts. Then
make sure to go back over the charging contacts with a dry
cloth before returning the handset to the base to charge.
Caution: Do not use paint thinner, benzene, alcohol, or other
contacts
chemical products. Doing so can discolor the surface of the
telephone and damage the finish.
[ 6 5 ] N O T E O N P O W E R S O U R C E S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
General Information
The phone complies with FCC Parts 15. Operating temperature:
0 °C to +50 °C (+32 °F to +122 °F)
AC Adapter Information
AC Adapter part number: AD-1005 for the base
Input Voltage: 100-240 AC 50/60Hz
Output Voltage: 12V DC 1000mA
Battery Information
Battery part number: BT-446
Capacity: 800mAh, 3.6V
• To avoid damage to the phone use only Uniden AD-1005 and BT-446 with your phone.
• If the handset is left off of the base, the actual Talk mode duration will be reduced
respective to the amount of time the handset is off the base.
Recharge your phone on a regular basis by returning the handset to the base after
each phone call. When the operating time becomes short even after the battery is
recharged, please replace the battery. With normal usage, the battery should last
about one year.
A replacement Uniden adapter or battery can be purchased by contacting the
Uniden Parts Department (see back page).
Specifications, features, and availability of optional accessories are all subject to
change without prior notice.
w w w . u n i d e n . c o m
G E N E R A L I N F O R M A T I O N [ 6 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Liquid Damage
Moisture and liquid may damage your cordless phone. Follow the steps below if your phone gets wet:
Case
Action
If the exterior plastic housing on the handset or
base is exposed to moisture or liquid.
Wipe off the liquid, and use as normal.
If moisture or liquid has entered the plastic housing Handset:
(i.e. liquid can be heard in the phone or liquid has
entered the handset battery compartment or vent
openings on the base).
1) Remove the battery cover and leave it off for ventilation.
2) Disconnect the battery pack. Leave the battery cover off and the battery pack
disconnected for at least 3 days.
3) Once the handset is completely dry, reconnect the battery pack and the battery
cover.
4) Recharge the handset's battery pack for 20 hours before using.
Base:
1) Disconnect the AC adapter from the base, cutting off electrical power.
2) Disconnect the telephone cord from the base.
3) Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery
packs to avoid charge interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will
cause permanent damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please call
our Customer Service Hotline at 1-800-297-1023.
[ 6 7 ] L I Q U I D D A M A G E
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
One Year Limited Warranty
Precautions!
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF
WARRANTY: Uniden warrants, for one year, to the original retail owner,
this Uniden Product to be free from defects in materials and
Before you read anything else, please observe the following:
Warning!
1. Do not use this product near water, for example, near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4. Use only the power cord and batteries indicated in this manual. Do
not dispose of batteries in a fire. They may explode. Check with local
codes for possible special disposal instructions.
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to the
unit, DO NOT expose this unit to rain or moisture.
craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate
and be of no further effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is
Rechargeable Nickel-Metal-Hydride Battery Warning
(A) damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D) serviced
or repaired by someone other than an authorized Uniden service center
for a defect or malfunction covered by this warranty, (E) used in any
conjunction with equipment or parts or as part of any system not
manufactured by Uniden, or (F) installed or programmed by anyone other
than as detailed by the owner's manual for this product.
• This equipment contains a rechargeable Nickel-Metal-Hydride battery.
• Nickel is a chemical known to state of California to cause cancer.
• The rechargeable Nickel-Metal-Hydride battery contained in this
equipment may explode if disposed of in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable Nickel-Metal-Hydride battery used in
this equipment in any charger other than the one designed to charge
this battery as specified in the owner's manual. Using another charger
may damage the battery or cause the battery to explode.
SAVE THESE INSTRUCTIONS
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return it
to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or
limitation of incidental or consequential damages so the above limitation
or exclusion may not apply to you.
Rechargeable Nickel-Metal-Hydride
Batteries Must Be Recycled or
Disposed of Properly
The FCC Wants You To Know
Should you experience trouble with this equipment, please contact
Uniden customer service at 800-297-1023.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed by
the owner's manual, could void your authority to operate this product.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this phone. To insure
the safety of users, the FCC has established criteria for the amount of
radio frequency energy various products may produce depending on their
intended usage. This product has been tested and found to comply with
the FCC's exposure criteria. For body worn operation, the FCC RF exposure
guidelines were also met when used with the Uniden accessories supplied
or designed for this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines and should be avoided.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Uniden works to reduce lead content in our PVC coated cords in our
products and accessories.
Warning!
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This warranty
is void outside the United States of America and Canada.
The cords on this product and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual you are certain that the
Product is defective, pack the Product carefully (preferably in its original
packaging). Disconnect the battery from the Product and separately
secure the battery in its own separate packaging within the shipping
carton. The Product should include all parts and accessories originally
packaged with the Product. Include evidence of original purchase and a
note describing the defect that has caused you to return it. The Product
should be shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
w w w . u n i d e n . c o m
P R E C A U T I O N S & W A R R A N T Y [ 6 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
I.C. Notice
RADIO EQUIPMENT
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were
met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device. "Privacy of
communications may not be ensured when using this telephone".
[ 6 9 ] I . C . N O T I C E
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Distinctive ringer. . . . . . . . . . . . . 22
E
Earpiece volume. . . . . . . . . . . . . . 34
Expanding your phone . . . . . . . . . 13
G
General information . . . . . . . . . . . 66
Global Setup . . . . . . . . . . . . . . . . 28
Hands-free conversation . . . . . . . . 30
Headset installation. . . . . . . . . . . 16
Hold . . . . . . . . . . . . . . . . . . . . . 32
I
I.C. notice . . . . . . . . . . . . . . . . . 69
Intercom . . . . . . . . . . . . . . . . . . 54
K
Key touch tone . . . . . . . . . . . . . . 25
L
Language . . . . . . . . . . . . . . . . . . 24
Liquid damage. . . . . . . . . . . . . . . 67
M
Making a call. . . . . . . . . . . . . . . . 31
Mute . . . . . . . . . . . . . . . . . . . . . 35
P
R
Index
Receiving a call . . . . . . . . . . . . . .31
Redialing a call . . . . . . . . . . . . . .33
Register the handset. . . . . . . . . . .14
Ringer
Numerics
20 ring options. . . . . . . . . . . . . . 21
3-Way Conferencing. . . . . . . . . . . 36
A
Animation screen . . . . . . . . . . . . 26
Anykey Answer . . . . . . . . . . . . . . 23
Area Code . . . . . . . . . . . . . . . . . 29
AutoTalk . . . . . . . . . . . . . . . . . . 22
B
Banner . . . . . . . . . . . . . . . . . . . 23
Battery
Preparing . . . . . . . . . . . . . . . . 12
Replacement and handling. . . . . 64
Beltclip . . . . . . . . . . . . . . . . . . . 16
C
Adjusting. . . . . . . . . . . . . . . . .34
Room/baby monitor . . . . . . . . . . .53
extra handset . . . . . . . . . . . . . .14
Handset. . . . . . . . . . . . . . . 12, 20
Menu options . . . . . . . . . . . . . .20
Soft Key . . . . . . . . . . . . . . . . . . .18
Speed dialing. . . . . . . . . . . . . . . .43
T
Transferring a call. . . . . . . . . . . . .55
V
Voice Mail Access . . . . . . . . . . . . .37
W
Warranty . . . . . . . . . . . . . . . . . . .68
Call transfer feature. . . . . . . . . . . 55
Caller ID
Call Waiting . . . . . . . . . . . . . . 32
Calling . . . . . . . . . . . . . . . . . . 49
CIDCW . . . . . . . . . . . . . . . . . . 46
Deleting . . . . . . . . . . . . . . . . . 48
Setting. . . . . . . . . . . . . . . . . . 29
Storing. . . . . . . . . . . . . . . . . . 50
Viewing . . . . . . . . . . . . . . . . . 47
Chain dialing . . . . . . . . . . . . . . . 39
Clock. . . . . . . . . . . . . . . . . . . . . 28
Contrast. . . . . . . . . . . . . . . . . . . 24
Copying phonebook . . . . . . . . . . . 45
D
Page . . . . . . . . . . . . . . . . . . . . . 36
Phonebook
Editing . . . . . . . . . . . . . . . . . . 44
Erasing . . . . . . . . . . . . . . . . . . 44
Making calls. . . . . . . . . . . . . . . 43
Storing . . . . . . . . . . . . . . . . . . 38
Viewing. . . . . . . . . . . . . . . . . . 42
Precautions. . . . . . . . . . . . . . . . . 68
Privacy Mode. . . . . . . . . . . . . . . . 35
De-register the handset . . . . . . . . 15
DirectLink . . . . . . . . . . . . . . . . . 51
w w w . u n i d e n . c o m
I N D E X [ 7 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Flow Chart
&KTGEV.KPMꢀ/QFG
4QQOꢀ/QPKVQT
*CPFUGVꢀ5GVWR
&KTGEV.KPMꢀ/QFG
4QQOꢀ/QPKVQT
*CPFUGVꢀ5GVWR
&KTGEV.KPMꢀ/QFG
4QQOꢀ/QPKVQT
*CPFUGVꢀ5GVWR
ꢀꢀꢀ570ꢀꢁꢂꢃꢄꢄ#ꢀ
ꢀꢀꢀ*CPFUGVꢀꢅꢁ
ꢀꢀ0GYꢀ%+&ꢃꢀꢀꢆ
/'07
MENU
∨
∨
$#%-
$#%-
1-
$#%-
$#%-
1-
$#%-
$#%-
1-
OK
OK
OK
6QꢀGPVGT
&KTGEV.KPMꢀOQFG
RTGUUꢀ='06'4?
.KUVGPꢀVQꢖ
ꢏ*#0&5'6ꢀ5'672
'FKVꢀ8QKEGꢀ/CKN
4KPIGTꢀ8QNWOG
4KPIGTꢀ6QPGU
&KUVKPEVKXGꢀ4KPI
#WVQꢀ6CNM
#P[MG[ꢀ#PUYGT
$CPPGT
.CPIWCIG
*CPFUGVꢀꢀꢀꢀꢅꢂ
*CPFUGVꢀꢀꢀꢀꢅꢋ
*CPFUGVꢀꢀꢀꢀꢅꢒ
*CPFUGVꢀꢀꢀꢀꢅꢆ
*CPFUGVꢀꢀꢀꢀꢅꢓ
*CPFUGVꢀꢀꢀꢀꢅꢑ
*CPFUGVꢀꢀꢀꢀꢅꢐ
*CPFUGVꢀꢀꢀꢀꢅꢔ
*CPFUGVꢀꢀꢀꢀꢅꢄ
$#%-
$#%-
'06'4
∧
or
∨
∧
or
∨
Enter
ꢀꢀꢀ570ꢀꢁꢂꢃꢄꢄ#
ꢀꢀꢀ*CPFUGVꢀꢅꢁ
&KTGEV.KPMꢀ/QFG
.%&ꢀ%QPVTCUV
-G[ꢀ6QWEJꢀ6QPG
#PKOCVKQPꢀ5ETGGP
%#0%'.
&KTGEV.KPM
$#%-
4QQOꢀ/QPKVQT
$#%-
1-
[ 7 1 ] M A I N M E N U F L O W C H A R T
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
4QQOꢀ/QPKVQT
*CPFUGVꢀ5GVWR
)NQDCNꢀ5GVWR
*CPFUGVꢀ5GVWR
)NQDCNꢀ5GVWR
>GIKUVGTꢀ*5
∨
∨
$#%-
$#%-
1-
$#%-
$#%-
1-
OK
OK
∧
or
∨
∧
or
∨
ꢀ>GIKUVGTꢀ*5!
;GU
0Q
ꢀꢏ).1$#.ꢀ5'672
&C[ꢀꢌꢀ6KOG
%+&%9
#TGCꢀ%QFG
&KCNꢀ/QFG
$#%-
$#%-
1-
OK
8QKEGꢀ/CKNꢀ6QPG
$#%-
$#%-
1-
ꢀ>GIKUVTCVKQP
ꢀꢀꢀꢀ%QORNGVG
$#%-
$#%-
1-
w w w . u n i d e n . c o m
M A I N M E N U F L O W C H A R T [ 7 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. If you have any questions or problems,
please do not return this product to the place of purchase.
If you have trouble connecting to your VoIP Service or have questions about your VoIP
service features
If you have questions on how to use your phone, add extra handsets, program the phonebook, etc.
Contact Uniden customer service at 800-554-7331, Monday-Friday, 8 am to 5 pm, CST, or visit the Uniden
Need a Part?
To order headsets, additional handsets, replacement batteries or other accessories, visit
Help for our Special Needs Customers
If you need special assistance due to a disability or have questions on the accessibility
features of this product, please call 1-800-874-9314 (voice or TTY)
May be covered under one or more of the following U.S. patents:
4,797,916 5,381,460 5,426,690 5,434,905 5,491,745 5,493,605
5,533,010 5,574,727 5,581,598 5,650,790 5,660,269 5,661,780
5,663,981 5,671,248 5,696,471 5,717,312 5,732,355 5,754,407
5,758,289 5,768,345 5,787,356 5,794,152 5,801,466 5,825,161
5,864,619 5,893,034 5,912,968 5,915,227 5,929,598 5,930,720
5,960,358 5,987,330 6,044,281 6,070,082 6,125,277 6,253,088
6,314,278 6,418,209 6,618,015 6,671,315 6,714,630 6,782,098
6,788,920 6,788,953 6,839,550 6,889,184 6,901,271 6,907,094
6,914,940
Other patents pending.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
REGISTER ONLINE TODAY!
THANK YOU FOR BUYING A UNIDEN PRODUCT.
©2005 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
UPZZ01790HZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
|