OW
N
E
R
’S
MANU
A
L
EXT1160/EXT1165
900 MHz Extended Range
Caller ID
One Touch
Voice Mail Access
Message Waiting
Indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome Congratulations on your purchase of the Uniden EXT1160 (white) or EXT1165 (charcoal)
cordless telephone. This phone is designed and engineered to exacting standards for
reliability, long life, and outstanding performance.
Note: Some illustrations in this manual may differ from the actual unit for
explanation purpose.
• Flash and Pause
• 900 MHz Extended Range Technology
• Message Waiting Indicator
• One Touch Access to Voice Mail Box
• 3 Line Backlit Display
Features
• Bilingual Language Option
• Tone/Pulse Dialing
• Page/Find
• 7 Hour Talk Time/14 Day Standby Time
• Handset Earpiece and Ringer Volume Control
• Hearing Aid Compatible
• Caller ID and Call Waiting Caller ID
• 10 Number Memory Dialing
• Face Up/Face Down Charging
• 32 Digit Redial
The EXT1160/EXT1165 features include AutoTalk™ and AutoStandby™. AutoTalk allows
you to answer a call by just removing the handset from the base so you don't have to
waste time pushing buttons or flipping switches. AutoStandby allows you to hang up
by simply returning the handset to the base.
TM
The UltraClear Plus true compander circuitry virtually eliminates background noise.
This innovative technology, together with 40 different channels, provides you with the
best possible reception during all your conversations.
To protect you against misbilled calls which might result from your phone being
TM
activated by other equipment, the EXT1160/EXT1165 has Random Code digital
security which automatically selects one of over 65,000 digital security codes for the
TM
handset and base. Also, the AutoSecure feature electronically locks your phone when
the handset is in the base.
®
Uniden is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of Uniden America Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
1. Handset antenna
2. Optional headset jack
3. Beltclip holes
4. Handset battery compartment
5. Handset earpiece
6. LCD display
7. Talk key
8. /left cursor ( )/tone key
*
9. Caller ID key
10. Volume down ꢀ key
11. Memory key
12. Handset microphone and
ringer speaker
13. Voice mail key
14. Flash key
memory
15. #/right cursor ( ) key
16. Delete key
17. Volume up L key
18. Redial/pause (p) key
19. Select/channel (ch) key
20. Handset charging contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 2 ]
C O N TR O LS A N D FU N C TI O N S
21. Handset retainer clip
22. Base charging contacts
23. Voice messages/status LED
indicator
24. Page/find key
25. Base antenna
26. Tone/pulse switch
27. DC power input
28. Telephone line jack
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N TR O LS A N D FU N C TI O N S
[ 3 ]
Read this First
This cordless telephone must be set up before use. Follow these steps:
Step 1 (page 5)
Unpack the telephone and accessories.
Step 2 (page 6)
Next, choose the best location to
set up the base unit.
Step 3 (page 7 to 10)
About the digital security code
Then, insert the battery pack into the
handset. Connect the base unit. You
must charge the battery pack for 15-20
hours before plugging into the
This cordless telephone uses a digital
security code to prevent unauthorized
access to your base unit. This
security code prevents other cordless
handsets from making calls through
your base unit.
A random security code will be
assigned automatically between your
base unit and handset when you
charge the battery pack for the
first time.
telephone line and using the phone.
Step 4 (page 26 to 27)
Finally, set the Caller ID options and
store your area code in the memory to
use the Caller ID service.
Note: Skip the area code setting if your
calling area requires 10-digit dialing.
If you want to reset the security
code, see page 34.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 4 ]
G E TTI N G S TA R TE D
Checking the Package Contents
Make sure you have received the following items in the package. If any of these
items are missing or damaged, contact the Uniden Parts Department.
• Handset
• AC adapter
• Rechargeable
battery
• Base unit
Also included:
• This Owner's Manual
• Other Printed Materials
• Beltclip
• Telephone cord
Uniden Parts Department at (800) 554-3988
Hours: M-F 7:00 a.m. to 5:00 p.m. CST. We can also be
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D
[ 5 ]
Setting up the Phone
Do the following steps:
A. Choose the best location
B. Install the battery pack
C. Connect the base unit
D. Choose the dialing mode
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION
CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY
INSTRUCTIONS brochure. Here are some important guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
Avoid television sets and
other electronic equipment
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration, or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power
outlet which is not switchable.
• Keep the base and handset away from sources of electrical noise such as
motors, microwave ovens, and fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a vertical
position.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 6 ]
G E TTI N G S TA R TE D
B. Install the battery pack
Charge the battery pack for at least 15-20 hours
before plugging the phone line into your phone.
1)Press in on the battery cover release and slide the cover
down until it comes off.
Use only the Uniden
battery (BT-905)
supplied with your
phone. Replacement
batteries are also
available through the
Uniden Parts Department.
(See page 5.)
2)Connect the battery pack connector observing correct
polarity (black and red wires) to the jack inside the
battery compartment.
Do not exert any force on this connection. It could cause
damage to the battery or to the handset. The plastic
connectors will fit together in only one way.
Once you are are certain that you have made a good
connection, then insert the battery pack into the battery
compartment. Do not pinch the wires.
3)Securely close the battery compartment cover by sliding
it up until it snaps into place.
4)Place the handset on the base. Remove the beltclip, if
attached, for face up charging.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D
[ 7 ]
Battery use time (per charge)
From fully charged
• Seven hours continuous use
• Fourteen days when the handset is in the standby mode
• Even when the
battery pack is not
being used, it will
gradually discharge
over a long period of
time. For optimum
performance, be sure
to return the
Low Battery Alert
When the battery pack is very low and needs to be
charged, the phone is programmed to eliminate functions
in order to save power. If the phone is not in use,
"Low Battery" appears on the LCD and none of the keys
will operate.
handset to the base
unit after a
telephone call.
If the phone is in use, "Low Battery" flashes and the
handset beeps. Complete your conversation as quickly as
possible and return the handset to the base unit
for charging.
• If you must replace
the battery pack
during a telephone
call, complete the
replacement of the
battery pack within
30 seconds, and you
can return to the
original call.
The last number dialed in the redial memory, the names and
the numbers stored in the memory locations are retained for
up to 30 minutes while you replace the battery pack.
Cleaning the Battery Charging Contacts
To maintain a good charge, it is important to clean
the battery contacts on the handset and base unit
with a dry cloth or a pencil eraser about once a
month. Do not use any liquids or solvents.
contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 8 ]
G E TTI N G S TA R TE D
C. Connect the base unit
1)Connect the AC adapter to the DC IN 9V
jack and to a standard 120V AC wall outlet.
• The handset can be
placed face up or face
down in the base for
charging.
2)Set the base on a desk or tabletop, and
place the handset on the base unit as
shown. Remove the beltclip, if attached,
for face up charging. (See "Mounting the
Base Unit on a Wall", on page 11.)
• You have to remove
the beltclip, if attached
for face up charging.
3)Raise the antenna to a vertical position.
m
e
m
o
ry
4)Make sure that the voice messages/status LED
indicator lights. If the LED does not light, check to
see that the AC adapter is plugged in and that the
handset makes good contact with the base charging
contacts.
•Use only the supplied AD-310 AC adapter. Do not use
any other AC adapter.
•Connect the AC adapter to a continuous power supply.
Place the power cord so
that it does not create
a trip hazard or where
it could become chafed
and create a fire or
•Place the base unit close to the AC outlet so that you
can unplug the AC adapter easily.
electrical hazard.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D
[ 9 ]
• After installing the battery pack in the handset, charge your handset at least
15-20 hours before plugging into the phone line. Once the handset battery
pack is fully charged, connect the telephone line cord to the base and
telephone wall outlet.
5)Connect the telephone line cord to the TEL LINE jack and
to a telephone outlet once the handset is fully charged.
If your telephone outlet
isn't modular, contact your
telephone company for
assistance.
Modular
D. Choose the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However some phone systems still use pulse dialing such as in rural areas.
The default setting is tone dialing. Depending on your dialing system, set the mode
as follows:
If your dialing system is
Set the switch to
TONE
PULSE -TONE DC IN 9V
TEL LINE
Tone
Pulse
PULSE
•If you are not sure of your dialing system, set for tone dialing. Make a trial call. If
the call connects, leave the setting as is, otherwise set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the DTMF tones
for certain situations during a call, you may "switch-over" to tone dialing. (Refer
to "Tone Dialing Switch-over" on page 15.)
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 10 ] G E TTI N G S TA R TE D
Mounting the Base Unit on a Wall
Setting the handset retainer clip for wall mounting
1)On the base unit, pull the handset retainer clip out of the
slot and rotate it clockwise 180 degrees.
2)Flip the retainer clip from front to back. Slide it back
into the slot so that the lip of the retainer is up and
the ꢀ is down. The retainer holds the handset in place.
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1)Plug the AC adapter into the DC IN 9V jack.
DO NOT use an outlet
controlled by a wall
switch.
2)Wrap the AC adapter cord inside the molded wiring
channel as shown.
3)Plug the AC adapter into a standard 120V AC
wall outlet.
4)Place the handset on the base unit and charge for
15-20 hours.
If you have wall
mounted the base, you
have to remove the
belt clip to hang the
handset with the
5)Plug the telephone line cord into the TEL LINE jack.
Wrap the cord inside the molded wiring channel
as shown.
display facing forward.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 11 ]
6)Plug the telephone line cord into the telephone outlet.
7)Raise the antenna to a vertical position.
8)Align the mounting slots on the base with the mounting posts on the wall.
Then push in and down until the phone is firmly seated.
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid
excessive lengths.
• Make sure the wall material is capable of supporting the weight of the base
and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1)Insert two mounting screws into the wall, (with their
appropriate anchoring device), 3-15/16 inches apart. Allow
about 1/8 of an inch between the wall and screw heads for
mounting the phone.
2)Set the retainer clip if necessary.
3)Refer to steps 1 through 8 on pages 11 and 12 to mount
the telephone.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 12 ] G E TTI N G S TA R TE D
Making and Receiving Calls
Handset
On Base
Handset
Off Base
Refer to page 26
"Setting Caller ID
Options" to turn on
Auto Talk feature
if desired.
Pick up the handset (AutoTalk)
or press talk.
Press any key (When the AutoTalk
is set to on) or press talk.
To answer
a call
1)Pick up the handset.
2)Press talk.
3)Listen for the dial tone.
4)Dial the number.
1)Press talk.
2)Listen for the dial tone.
3)Dial the number.
To make
a call
OR
OR
1)Pick up the handset.
2)Dial the number, then press talk.
Dial the number, then press talk.
Press talk, or return the handset Press talk.
To hang up
To redial
to the base (AutoStandby).
1)Pick up the handset.
2)Press talk.
1)Press talk.
2)Listen for the dial tone.
3)Press redial/p.
3)Listen for the dial tone.
4)Press redial/p.
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 13 ]
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is
the terminology explanation.
• Standby Mode - The handset is not in use, off the base, and talk has not been
pressed. A dial tone is not present.
• Talk Mode - The handset is off the base and talk has been pressed enabling a
dial tone.
Adjusting the Handset Ringer and Earpiece Volume
Ringer tone and volume
When the phone is in standby mode, pressing the vol ꢀ or L key on the handset
selects the handset ringer volume and tone. There are two ringer tones each with
two volume levels. Continue pressing the vol ꢀ or L key to listen to all tones and
volume levels. The phone keeps the last ringer tone and volume setting selected.
Earpiece volume
Talk 0:15
Volume High
The handset earpiece volume settings (Low, Medium, High and
Loud) can only be adjusted during a call. Press vol ꢀ or L to
select Low, Medium, High and Loud. When you hang up,
the phone keeps the last volume setting selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 14 ] B A S I C S
Redial
The redial/p key redials the last number dialed. The redialed number can be up
to 32 digits long.
Tone Dialing Switch-over
Some telephone companies use equipment that require pulse
dialing (sometimes referred to as rotary dialing). If you
need to enter tone dialing digits, you can switch-over to
tone dialing during the call. An example of this could be
entering your bank account number after you have called your bank. The digits of
your bank account can be sent using DTMF tones.
The tone feature only
applies when the dial
mode is set to pulse.
Initially make your call with the pulse dialing mode. Once your call connects,
press */tone . Enter the desired number (like in example above: the bank
account number). These digits will be sent as tone dialing. This special number
can be stored in a memory location. This is referred to as Chain Dialing (See page
22.) Once the call ends, the tone mode is canceled and pulse dialing mode
resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit,
noise increases. If you pass the range limits of the base unit, your call will
terminate within 20 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 15 ]
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change
the phone´s channel for clear operation. Interference can come from appliances or
other phones in your home. This function works only when the phone is in use.
During the course of a conversation, if you hear static or noise which makes it
difficult to hear, press select/ch. "Scanning" appears on the display, indicating
the phone is changing to another channel. For more information on interference,
refer to "Technical Information" on page 40.
Page
To locate the handset (while it's off the base), press
page/find on the base. The handset beeps for 60 seconds.
Paging is canceled when pressing any key or the handset is
returned to the base.
If you press talk
during paging, the
handset will be placed
in the talk mode.
Flash and Call Waiting
If you have "Call Waiting" service and
a call waiting tone sounds while you are on a call, press
flash to accept the waiting call. There is a short pause,
then you will hear the new caller. To return to the original
caller, press flash again.
You must subscribe through your local telephone company
to receive Call Waiting Service.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 16 ] B A S I C S
Using One Touch Voice Mail Access
If you subscribe to voice mail service, you can use your EXT1160/EXT1165 to access your
voice mailbox. The messages light on the base of your phone flashes whenever you have
messages waiting in your voice mailbox. Just program the m key with your access number
and you can get your messages at the touch of a button. (The voice mail service provider will
supply you with the access number. This number may be simply a phone number. Refer to the
provider’s literature.)
You must subscribe to
voice mail service from
your telephone
company in order to
use this feature. The
voice mail service
company will provide
you with the access
number.
Programming your Voice Mail Access Number
1)On the handset, press and hold m for about 2 seconds. The
Store Number
following screen appears:
If you have previously stored a number, the following display appears:
Use the L and ꢀ to move the pointer to the Edit
Number option. Press select/ch to select the option.
Edit Number
Delete Number
Go Back
2)Enter your personal access number.
3)Press select/ch. You will hear a confirmation tone and the
following display appears:
Number Stored
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 17 ]
Dialing your Voice Mail Service
Once you’ve programmed your personal access number, you can dial your mailbox
with a touch of a button. When you have messages, simply pick up the handset and
press m. Or press talk, listen for the dial tone, and then press m. If you have not
entered the access number or it has been deleted, when you press m, an error tone
sounds.
Message Waiting Indicator
The voice messages/status LED indicator on the base is designed to work with voice
mail service provided by your local telephone company. The indicator flashes when
you have new voice messages.
You may need to occasionally reset the indicator if it remains on after you retrieved
your messages. To reset the indicator, press and hold page/find for 5 seconds or
until the indicator stops flashing.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 18 ] B A S I C S
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key strokes. Your
EXT1160/EXT1165 stores up to 10 names/numbers in the handset.
1)Press and hold memory until "Memory Store" is
Memory Store
displayed.
1
2
2)Press L and ꢀ or enter a number (0 - 9) to select the
memory location where you would like to store
the number.
In memory dialing
operation, you must
press a key within
20 seconds or the
phone will return
to standby.
If you return the
handset to the base,
the phone will return
to standby also.
3)Press select/ch. The following screen appears and a
Store Name
cursor flashes indicating that the display is ready for
the name to be entered.
Edit Memory 1
Delete Memory 1
Go Back
If this screen appears, the selected memory location is already stored. Then
you must either change the entry in this location, clear the entry in this
location, or select "Go Back" to choose another location.
4)To enter a name (up to 14 characters), use the number keys.
• Use the L and ꢀ keys to scroll through the character menu.
• Use #
and /tone
to move the cursor to the desired location.
*
• Use delete to delete characters as needed.
• Press and hold delete to delete all the characters.
• If a name is not required, go to step 5.
Download from Www.Somanuals.com. All Manuals Search And Download.
M E M O RY D I A LI N G [ 19 ]
5)Press select/ch. "Store Number" is displayed.
The cursor flashes indicating that the display is ready
for the number to be entered.
Store Number
6)Use the number keys to enter the phone number.
The phone number cannot exceed 16 digits.
Use redial/p to enter pause in the dialing sequence.
The display shows a "P". Each pause counts as one
digit and represents a two second delay of time between
the digits.
Store Number
8002971023
• You have 20 seconds
after pressing
Use delete to delete digits as needed.
memory to enter the
number you wish to
store. Otherwise, an
error tone will
7)Press select/ch. The handset beeps and displays the
confirmation screen. Memory storage is complete.
For example, if you store a name and number into
memory location number 7, the display shows
"Memory 7 Stored".
Memory 7 Stored
sound.
• The pause feature is
useful for long
After about 2 seconds, "Memory Store" is displayed.
Repeat steps 2 - 7 to store more numbers.
Memory Store
7 UNIDEN CORP
8 <Memory 8>
distance calling,
credit card dialing,
or sequences that
require a pause
8)Press memory to return to standby mode.
between digits.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 20 ] M E M O RY D I A LI N G
Making Calls with Memory Dialing
Memory dialing from Standby Mode
1 UNIDEN CORP
2 JOHN DOE
3 MOM AND DAD
1)Press memory.
The handset displays your programmed
memory locations.
• If you press select/ch
before talk, you can
confirm the name and
the number stored in
the selected
2)Press ꢀ and L or enter the number (0 - 9) to
select the memory location you would like to dial.
Talk
0123456789012
memory location.
talk
3)Press
. "Talk" and the volume setting appear on
the display. Then the displayed number is dialed.
• To exit the memory
function without
dialing, press
memory.
The handset returns
to standby.
Display a Programmed Number
Use #
and /tone
to toggle between the names display and the
*
numbers display.
• Whenever you are
using a menu screen,
you must press a key
within 20 seconds or
the phone will return
to standby.
Program name
Program number
1 UNIDEN CORP
2 JOHN DOE
3 MOM AND DAD
1
1 8002971023
2 5452930
1 3 8175551212
Download from Www.Somanuals.com. All Manuals Search And Download.
M E M O RY D I A LI N G [ 21 ]
Memory dialing from Talk Mode
talk
1)Press
. "Talk" and the
Talk
Talk
Volume High
volume setting appears.
memory
2)Press
.
Talk
0:00
3)Enter a number (0 - 9) to select the memory location of
the desired phone number. The selected phone number is
displayed. Then the number is dialed.
Talk 0:35
0123456789012
talk
4)To hang up, press
.
Chain Dialing
The 10 memory locations on the handset are not limited to phone numbers. You
may want to store in memory a group of numbers (up to 16 digits) that you need
to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
memory and
when you are prompted to enter the account number, simply press
then the location where the special number has been stored.
Store your special number with identifying name in memory as you would a phone
number. (Refer to Storing Phone Numbers and Names on page 19.) Enter a
"
"
pause as necessary in the sequence.
A pause counts as one digit and represents a two second delay in time between
digits as they are sent.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 22 ] M E M O RY D I A LI N G
Editing a Stored Name and/or Phone Number
1)Press and hold memory until "Memory Store" is
Memory Store
1 UNIDEN CORP
2 JOHN DOE
displayed.
2)Press L and ꢀ or enter a number (0 - 9) to select the memory location you
would like to edit.
3)Press select/ch.
Edit Memory 2
Delete Memory 2
Go Back
The following screen appears with the memory location
number that you have selected in the display.
4)Press L or ꢀ to select "Edit Memory", then press select/ch.
The following screen appears. The cursor flashes
Store Name
UNIDEN CORP
indicating that the display is ready for the name to be
edited. When a name has not been stored, the cursor
appears at the beginning of the second line.
5)Use the L or ꢀ keys, /tone , # , or delete to edit
*
the name. (See page 19.)
To edit only the phone number, skip this step.
Store Number
8002971023
6)Press select/ch. The following screen appears.
The cursor flashes indicating that the display is ready for
the number to be edited.
7)Use the number keys, redial/p, /tone , # , or delete to edit the
*
phone number.
The phone number cannot exceed 16 digits. (See page 20.)
If you don´t want to change the phone number, skip this step.
Download from Www.Somanuals.com. All Manuals Search And Download.
M E M O RY D I A LI N G [ 23 ]
8)Press select/ch. The handset beeps and displays the
confirmation screen. The memory storage is complete.
For example, if you store a name and number into
memory location number 1, the display shows
"Memory 1 Stored". After about 2 seconds,
"Memory Store" is displayed.
Memory 1 Stored
Memory Store
1 UNIDEN CORP
2 JOHN DOE
9)Press memory to return to standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 24 ] M E M O RY D I A LI N G
Erasing a Stored Name and Phone Number
1)Press and hold memory until "Memory Store" is
Memory Store
1 UNIDEN CORP
2 JOHN DOE
displayed.
2)Press L and ꢀ or enter a number (0 - 9) to select
Memory Store
1 UNIDEN CORP
2 JOHN DOE
the memory location you would like to edit.
3)Press select/ch.
Edit Memory 2
Delete Memory 2
Go Back
The following screen appears with the memory
location number that you have selected in the
display.
Edit Memory 2
Delete Memory 2
Go Back
4)Press ꢀ to move the pointer down to "Delete
Memory".
Delete Memory 2?
Yes
No
5)Press select/ch. The following confirmation screen
appears.
6)Press L to move the pointer to "Yes".
7)Press select/ch or delete.
Memory 2 Deleted
The following screen appears.
8)After a few seconds the display returns to the
"Memory Store" screen.
Memory Store
2
3 MOM AND DAD
You may delete the information in another memory
location (return to step 2) or press memory to
return to standby.
Download from Www.Somanuals.com. All Manuals Search And Download.
M E M O RY D I A LI N G [ 25 ]
Caller ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller´s
name and phone number on the display before you answer the phone.
The handset displays the phone number of the incoming call, the name, time,
and the number of calls. Additionally, you can dial the displayed number and
store the information for memory dialing.
You must subscribe to
Caller ID on Call
Waiting in order to use
this feature.
Setting Caller ID options/Language
The Call Wating options
are a separate service
available through your
phone company.
There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call
Waiting) and Area Code.
AutoTalk
talk
. If the phone rings
allows you to answer the phone without pressing
when AutoTalk is on, simply remove the handset from the base and the phone
automatically answers the call. Or, if the handset is not on the base, press any key to
talk
answer the call. If the phone rings when AutoTalk is off, you must press
answer the call.
to
Caller ID on Call Waiting (CIDCW)
waiting number.
performs the same as regular Caller ID on a call
Area Code
If you enter a 3-digit area code number in the
option, your local area code
does not appear in Caller ID messages. When reviewing or receiving Caller ID
messages, you will see only the local 7-digit number. For calls received from outside
your local area code, you will see a full 10-digit number.
If your calling area
requires 10-digit
dialing, do not program
this option.
Language
option can be used to choose the language of your display. You can select
either English or French.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 26 ] C A LLE R I D FE ATU R E S
To change your Caller ID options/Language:
call id
1)When the phone is in standby mode, press and hold
The following screen appears.
.
2)Use L, ꢀ, or a number key (1-4) to move the pointer to the selection that
you would like to change.
select/ch
Press
to toggle between "On" and "Off" for "Auto Talk".
For "CIDCW", choose "On", "Off", or "Opt", depending upon the type of
service to which you subscribe.
3)When you wish to enter the Area Code, press ꢀ or the number key 3 to move
select/ch
the pointer to "Area Code". Then press
area code by using the number keypad (0 - 9). After entering the area code,
select/ch
and enter the 3 digit
press
.
4)To set up the language of your display, press ꢀ or the
number key 4 to move the pointer to "Language".
4 Language Eng
select/ch
Press
to select "Eng"(English) or "Fr"(French).
call id
5)After you have made your selections, press
the base.
and return the handset to
Download from Www.Somanuals.com. All Manuals Search And Download.
C A LLE R I D FE ATU R E S [ 27 ]
When the Telephone Rings
1)When the Caller ID message is received, the display shows the caller´s
phone number along with the date and time. The incoming call information
is stored in the Caller ID record. If the Caller ID service includes the
caller´s name, the caller´s name appears on the display (up to 15 letters).
The date and
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the
time received
Number of calls
from the same
Caller ID
5/11 12:30PM 01
UNIDEN CORP
800-297-1023
Caller's name
Caller's phone number
Caller ID message
will not appear.
Here are some typical displays;
When the phone number and
name data are received
• When the call is
received via a
When invalid data is received
telephone company
that does not offer
Caller ID service, the
caller´s phone
number and name do
not appear.
When a private name is received
When an unknown name is received
When a private number is received
(This includes
international calls.)
When an unknown number is received
• When the call is via
a private branch
exchange (PBX), the
caller´s phone
number and name
may not appear.
2)When you pick up the phone, the display changes to "Talk". (AutoTalk feature
is set to on.)
Data errors appear as "2".
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 28 ]
Viewing the Caller ID Message List
The Caller ID list stores information for up to 30 incoming calls - even
unanswered calls.
• In Caller ID
1)Press call id.
operation, if no key
is pressed for more
than 20 seconds, an
error tone sounds
and the telephone
returns to the
The summary screen appears.
New :01
Total:02
The screen shows the number of new messages and
total messages.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
2)Press ꢀ to display the latest Caller ID message.
standby mode.
• If a call comes in via
a telephone system
that does not offer
Caller ID service, no
information is
3)Press ꢀ to see the next message. Or press L to see the
previous message.
stored.
4)Press call id to return to standby.
• Each message can be
up to 15 characters
for the phone
number and the
name.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 29 ]
Deleting Information from the Caller ID List
The EXT1160/EXT1165 stores up to 30 messages. If the phone receives the 31st
message, the oldest one in the list is automatically deleted. Caller ID data can
also be deleted manually.
• While using the
"Delete All?" or
"Delete
Message?" screen
if no key is pressed
for more than
20 seconds, an error
tone sounds and the
telephone returns
to standby.
Deleting a Caller ID message
1)Press call id. Display the message to be deleted from
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
the Caller ID list by pressing L or ꢀ.
2)Press delete.
Delete Message?
Yes
No
3)Press L or ꢀ to select "Yes" or "No".
• If you get an
incoming call or
page, the deleting
operation is
canceled and the
telephone returns to
standby so you can
answer the call
or page.
4)Press select/ch or delete.
When the pointer is at "Yes":
A tone sounds and the Caller ID message is deleted.
The next Caller ID message is then displayed.
When the pointer is at "No":
The display returns to the Caller ID message.
Deleting all Caller ID names/numbers
1)Press call id.
New :01
Total:02
2)Press delete.
Delete All?
Yes
No
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 30 ] C A LLE R I D FE ATU R E S
3)Press L or ꢀ to select "Yes" or "No".
4)Press select/ch or delete.
When the pointer is at "Yes":
A tone sounds and all stored Caller ID messages
are deleted.
Total:00
New :01
Total:02
When the pointer is at "No":
The display returns to the summary screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
C A LLE R I D FE ATU R E S [ 31 ]
Using the Caller ID List
Calling a party from the Caller ID list
You can place a call from the Caller ID list. The EXT1160/EXT1165
stores up to 30 messages.
1)Press call id. Select the phone number that you want to
• You cannot make a
call from the Caller
ID list if your
dial by pressing L or ꢀ.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
EXT1160/EXT1165 is
connected to private
branch exchange
(PBX).
2)Press talk. The displayed phone number dials automatically.
Talk
8002971023
Long Distance calls
• When a long
Pressing 1 while the incoming Caller ID information is displayed (in step 1) will
distance call has
been set, "1" appears
in the display.
place the prefix "1" in the display to set up for a long distance call.
Dial edit
You can temporarily edit the Caller ID number that is displayed by pressing
.
select/ch
A cursor appears in the display. Press delete to move the cursor left, make your
changes and then press talk. This will not change the number in the Caller ID
list memory.
If you want to save this new number, store the information in memory.
(See page 19.)
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 32 ] C A LLE R I D FE ATU R E S
Storing Caller ID messages in Memory dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number
of the party on the Caller ID list can be stored in memory.
You can not store a
Caller ID message if no
phone number appears
in the message.
1)Press call id.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
Select the phone number to be stored from the Caller
ID list by pressing L or ꢀ.
Select Location
1 UNIDEN CORP
2 JONE DOE
2)Press memory.
3)Press L and ꢀor enter a number (0 - 9) to select the
memory location to be stored.
4)Press select/ch.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
The number is stored in memory, and the display
returns to the Caller ID list.
If a message has already been stored in the selected
Replace Memory?
Yes
No
memory number location, a confirmation screen is
displayed. Press L to select "Yes". Press select/ch to
overwrite. The display returns to the Caller ID list.
Download from Www.Somanuals.com. All Manuals Search And Download.
C A LLE R I D FE ATU R E S [ 33 ]
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset
and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See
"About the digital security code", page 4.)
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
If the handset battery
pack is completely
discharged or the
1)Place the handset in the base unit. Press page/find on the base.
battery pack is removed,
the digital security code
will be lost. If this
happens, a new security
code is set automatically
next time the battery
pack is charged.
2)The handset begins emitting a paging sound. While holding page/find for at
least 3 seconds, place the handset on the base unit. The paging sound stops.
Leave the handset on the base for more than 5 seconds or until the voice
messages/status LED indicator stops flashing. A new random security code
is set.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 34 ] A D D I TI O N A L I N FO R M ATI O N
Installing the Beltclip
To attach the beltclip
To remove the beltclip
Insert the beltclip into the holes on
each side of the handset. Press down
until it clicks.
Pull both sides of the beltclip to
release the tabs from the holes.
If the beltclip is
attached, you can only
charge the handset in
the face down position.
Headset Installation
Your phone may be used with an optional headset, the Uniden
HS910. To use this feature, insert headset plug into the
headset jack. Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts
Department or visiting the web site. See Page 5.)
Download from Www.Somanuals.com. All Manuals Search And Download.
A D D I TI O N A L I N FO R M ATI O N [ 35 ]
Note on Power Sources
Battery replacement and handling
RECYCLING NICKEL-CADMIUM BATTERIES
When the operating time becomes short, even after a battery
is recharged, please replace the battery.
With normal usage, your battery should last about one year.
Please contact your place of purchase or the Uniden Parts
Department for a replacement battery.
NICKEL-CADMIUM
BATTERIES MUST BE
DISPOSED OF PROPERLY.
Nickel-cadmium cells are used in the
battery pack. Please take your used nickel-
cadmium battery packs to a store that
recycles nickel-cadmium batteries.
Power Failure
During the period that the power is off, you will not be able to
make or receive calls with the telephone.
Caution
• Use the specified battery pack.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Maintenance
When slightly dirty
Wipe with a soft, dry cloth.
Caution
Do not use paint thinner,
benzene, alcohol, or other
chemical products.
Doing so may discolor the
surface of the telephone
and damage the finish.
When very dirty
Wipe with a soft cloth that has been dampened with diluted,
neutral detergent. Dry with a dry cloth.
When the charging terminals become dirty
Wipe with a dry cloth or a pencil eraser, if necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 36 ] A D D I TI O N A L I N FO R M ATI O N
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The voice messages/status
LED indicator won't light when
the handset is placed in the
base.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in base.
• Make sure the charging contacts on the handset and base are clean.
• Make sure that the base antenna is in a vertical position.
The audio sounds weak
and/or scratchy.
• Move the handset and/or base to a different location away from
metal objects or appliances and try again.
• Press select/ch to help eliminate background noise.
• Make sure that you are not too far from the base.
• Check both ends of the base telephone line cord.
Can't make or receive calls.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Reset the digital security code (See page 34).
Download from Www.Somanuals.com. All Manuals Search And Download.
A D D I TI O N A L I N FO R M ATI O N [ 37 ]
Symptom
Suggestion
The handset doesn't ring or
receive a page.
• The battery pack may be weak. Charge the battery on the base unit
for 15-20 hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Reset the digital security code (See page 34).
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote
control toys, wireless microphones, alarm systems, intercoms, room
monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
The Caller ID does not display.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service
is current.
• Charge the handset.
• Call our customer hotline at 1-800-297-1023.
If you still have a problem
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 38 ] A D D I TI O N A L I N FO R M ATI O N
General Information
The phone complies with FCC Parts 15 and 68.
Operating temperature: -10° to 50°C (+14°F to +122°F)
AC Adapter Information
AC Adapter part number: AD-310
Input Voltage:
Output Voltage:
120V AC 60Hz
9V DC 210 mA
Battery Information
Battery part number:
Capacity:
BT-905
600 mAH, 3.6V
Battery use time (per charge)
From fully charged -
Talk mode duration:
7 hours
Standby mode duration: 14 days
If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of
time the handset is off the base.
Recharge your phone on a regular basis by returning the handset to the base after each phone call. When
the operating time becomes short, even after the battery is recharged, please replace the battery. With
normal usage, the battery should last about one year.
Replacement batteries may be purchased at your local Uniden dealer or by contacting the Uniden Parts
Department (800) 554-3988. Hours are from 7:00 a.m. to 5:00 p.m. Central Time, Monday through Friday.
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
A D D I TI O N A L I N FO R M ATI O N [ 39 ]
Technical Information
The FCC wants you to know!
Telephone Line Problems
Changes or modifications to this product not
expressly approved by Uniden, or operation of this
product in any way other than as detailed by the
owner's manual, could void your authority to
operate this product. The equipment cannot be
used on public coin phone service provided by the
telephone company. Connection to party line
service is subject to state tariffs. (Contact the
state public utility commission, public service
commission or corporation commission for
information.)
The FCC has granted the telephone company the
right to disconnect service in the event that your
phone causes problems on the telephone line.
Also, the telephone company may make changes in
facilities and services which may affect the
operation of your unit. However, your telephone
company must give adequate notice in writing
prior to such actions to allow you time for making
necessary arrangements to continue uninterrupted
service.
If you are having trouble with your telephone
service, you must first disconnect your phone to
determine if it is the cause of your problem. If
you determine that it is the cause, you must
leave it disconnected until the trouble has been
corrected.
Below is some information that might concern
you while using your new phone.
Range
Your new phone is designed to achieve the
maximum possible range by transmitting and
receiving according to the highest specifications
set forth by the FCC. We have rated this phone to
operate at a maximum distance with the
qualification that the range depends upon the
environment in which the telephone is used. Many
factors limit range, and it would be impossible to
include all the variables in our rating. The
Maximum Range rating of this phone is meant to
be used as a means of comparison against other
range claims.
Radio Interference
Radio interference may occasionally cause buzzing
and humming in your cordless handset, or clicking
noises in the base. This interference is caused by
external sources such as TV, refrigerator, vacuum
cleaner, fluorescent lighting, or electrical storm.
Your unit is NOT DEFECTIVE. If these noises
continue and are too distracting, please check
around your home to see what appliances may be
causing the problem.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 40 ] A D D I TI O N A L I N FO R M ATI O N
In addition, we recommend that the base not be
plugged into a circuit that also powers a major
appliance because of the potential for
interference. Be certain that the antenna on the
unit is fully extended when needed.
More Than One Cordless Telephone
If you want to use more than one cordless
telephone in your home, they must operate on
different channels. Press the channel key to select
a channel that provides the clearest
communication.
In the unlikely event that you consistently hear
other voices or distracting transmissions on your
phone, you may be receiving radio signals from
another cordless telephone or other source of
interference. If you cannot eliminate this type
of interference, you need to change to a
different channel.
Cordless Telephone Privacy
Cordless telephones are radio devices.
Communications between the handset and base of
your cordless telephone are accomplished by
means of radio waves which are broadcasted over
the open airways. Because of the inherent
physical properties of radio waves, your
communications can be received by radio receiving
devices other than your own cordless telephone
unit. Consequently, any communications using
your cordless telephone may not be private.
Finally, it should be noted that some cordless
telephones operate at frequencies that may
cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base
of the cordless telephone should not be placed
near or on top of a TV or VCR. If interference is
experienced, moving the cordless telephone
farther away from the TV or VCR will often
reduce or eliminate the interference.
Download from Www.Somanuals.com. All Manuals Search And Download.
A D D I TI O N A L I N FO R M ATI O N [ 41 ]
Index
A
I, J, K, L
AC adapter information ............................39
Adjusting ringer and earpiece volume..........14
Interference ..........................................40
Language ..............................................26
B
M, N, O
Battery pack
Maintenance ........................................ 36
Making a call ........................................ 13
Memory dialing
Information ........................................39
Installing ............................................7
Maintenance ....................................8, 36
Preparing and charging .......................... 9
Replacement and handling .................... 36
Beltclip installation .............................. 35
Editing a stored name
and phone number............................ 23
Erasing a stored name
and phone number............................ 25
Making calls with memory dialing .......... 21
Storing phone numbers and names .......... 19
Mounting on a wall ................................11
C
Caller ID
Caller ID service .................................... 28
Call Waiting........................................ 16
Deleting ............................................ 30
Setting Caller ID options ...................... 26
Using ................................................ 32
Viewing ............................................ 29
Channel ................................................16
Connection ............................................ 9
P, Q
Package contents .................................... 5
Paging ................................................ 16
R
Receiving a call .................................... 13
Redialing a call ................................ 13, 15
Ringer tone and volume .......................... 14
D
S
Dialing mode..........................................10
Digital security code .......................... 4, 34
Setting up the Phone .............................. 6
Setting up the Handset ............................ 7
E, F, G
T, U, V, W, X, Y, Z
Earpiece volume .................................... 14
Technical information ..............................40
Troubleshooting .................................... 37
Voice mail ............................................17
H
Headset installation .............................. 35
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 42 ]
At Uniden, we´ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 7:00 AM to 7:00 PM CST.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 43 ]
Memo
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 44 ]
Memo
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 45 ]
Covered under one or more of the following U.S. patents:
4,511,761 4,523,058 4,595,795 4,797,916 5,381,460 5,426,690
5,434,905 5,491,745 5,533,010 5,574,727 5,650,790 5,660,269
5,661,780 5,663,981 5,671,248 5,717,312 5,754,407 5,768,345
5,787,356 5,838,721 5,884,619 5,893,034 5,912,968 5,915,227
5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082
6,125,277
© 2001 Uniden America Corporation, Fort Worth, TX
All rights reserved
UCZZ01319ZA
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|