T H E E X S 9 6 5 0
S P R E A D
SPE
C
TRUM
Digital Spread Spectrum
provides the longest
range, the clearest sound
and the best privacy.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Congratulations on your purchase of the Uniden EXS 9650 cordless
telephone. This phone is designed for reliability, long life, and
outstanding performance utilizing the latest 900 MHz Spread Spectrum
Technology.
FEATURES
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
900 MHz Digital Spread Spectrum Technology
2-Line Operation
3 and 4-Way Conference Calling
Speakerphone
Back-up Power Supply with Optional Battery Pack
3-Line, 16 Character LCD Handset Display
Headset Compatible
Handset Earpiece and Ringer Volume Control
20 Memory Dialing Locations
32 Digit Redial
2-way Page/Intercom
Hearing Aid Compatible
Redial, Flash, and Pause
Pulse/Tone Dialing
7-Day Standby Battery Time
4-Hour Talk Time
Digital Spread Spectrum Technology utilizes a “wider
frequency band” vs. a “single narrow band” used in standard digital
transmissions. The result is a more secure conversation with the clarity of
digital sound, extended range, and minimal interference from other cordless
phones.
TM
Random Code digital security automatically selects one of over
65,000 codes for the handset and base. This feature prevents unauthorized
calls as a result of your phone being activated by other equipment.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INCLUDED IN YOUR PACKAGE
To get the most from
your phone, please read
this owner’s manual
Handset
Base
AC Adapter
thoroughly. Be sure to
complete and mail the
product registration form.
Short Telephone Cord
Beltclip
Rechargeable Battery
If any of these items are
missing or damaged,
contact the Uniden Parts
Department at (800) 554-
3988. Hours are from
8:30 a.m. to 5:00 p.m.
Central Time, Monday
through Friday. We can
also be reached on the
Long Telephone Cord
Desktop/Wall Mount
Adapter
Wall Mounting Screws
G
G
G
This Owner’s Manual
Precautions and Important Safety Instructions
Registration Card
You must have a two-line
subscription from your
phone company to realize
the capability of your
two-line phone.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING A LOCATION
Before choosing a location for your new phone, read the
INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND
IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some
important guidelines you should consider:
G
The location should be close to both
a phone jack and a continuous power
outlet. (A continuous power outlet is an
AC outlet which does not have a switch
to interrupt its power.)
G
Keep the base and handset away from
sources of electrical noise such as
motors and fluorescent lighting.
G
G
G
G
Be sure there is sufficient space to rotate the base antenna
fully vertical.
The base can be placed on a desk, tabletop or mounted on a standard
wall plate.
You should charge your handset for 15-20 hours before connecting the
phone line.
If your second phone line has a separate jack, place your phone so you
can access both jacks.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DESK/TABLETOP INSTALLATION
Before using your phone,
charge the Nickel-
Cadmium battery pack
for 15-20 hours.
1. Snap the desktop/wall mount adapter into
the top of the base as shown.
2. Plug the AC adapter cord into the 10V DC
input jack on the back of the base.
3. Wrap the AC adapter cord around the strain relief notch.
4. Plug the AC adapter into a standard 120V AC wall outlet.
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed
and create a fire or
5. Charge the battery (refer to CHARGING THE BATTERY PACK,
page 11).
electrical hazard.
6. Plug one end of the long telephone cord into the TEL LINE 1/2 jack
on the back of the base.
7. Plug the other end of the cord into the telephone jack on the wall.
8. Set the base on a desk or tabletop.
Place the handset on the base with the
keypad facing up or down. Raise the
antenna to a vertical position.
Use only the Uniden AC
adapter supplied with
this phone. DO NOT use
an outlet controlled by a
wall switch.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL INSTALLATION
M Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1. Snap the desktop/wall mount
adapter into the bottom of the base
as shown.
2. Plug the AC adapter into the base.
3. Place the AC adapter cord inside
the molded wiring channel.
Wrap the cord around the strain
relief notch.
4. Plug the AC adapter into a standard
120V AC wall outlet.
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed
and create a fire or
5. Plug one end of the short telephone
cord into the TEL LINE 1/2 jack
on the back of the base. Plug the
other end into a standard
electrical hazard.
telephone jack.
If your second line has a separate
jack, plug the other cord into the
base and wall jack.
DO NOT use an
outlet controlled by a
wall switch.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Align the mounting slots on the
base with the mounting posts on the
wall. Push in and down until the
phone is firmly seated.
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, charge the
battery (See CHARGING
THE BATTERY PACK,
page 11).
7. On the base, pull the handset retainer out
of the slot. Rotate clockwise 180°.
8. Flip the retainer from front to back.
Slide it back into the slot so that the lip of the
retainer is up and the oval is down. The
retainer holds the handset in place.
M Direct wall mounting
If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
G
Select a location away from electrical cables, pipes, or other items
behind the mounting location that could cause a hazard when
inserting the screws into the wall.
G
G
Mount your phone near a working phone jack to avoid excessive
cord lengths.
Make sure the wall material is capable of supporting the weight of the
base and the handset.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Insert two mounting screws (with the
appropriate anchoring device) into the wall
3-15/16 inches apart. Allow about 3/16 of an inch
between the wall and screw heads for mounting
the phone.
2. Snap the desktop/wall mount
adapter into the bottom of the base
as shown.
3. Plug the AC adapter cord into the
10V DC input jack on the back of
the base.
4. Put the AC adapter cord inside the
molded wiring channel. Wrap it
around the strain relief notch. Plug
the AC adapter into a standard
120V AC wall outlet.
5. Plug one end of the long telephone
cord into the TEL LINE 1/2 jack
on the back of the base. Plug the
other end into a telephone jack.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Align the mounting slots on the
base with the mounting screws on
the wall. Push in and down until
the phone is firmly seated.
7. On the base, pull the handset retainer
out of the slot. Rotate clockwise 180°.
Be careful not to insert
the mounting screws
into possible electrical
hazards such as cables,
wiring or pipes.
8. Flip the retainer from front to back.
Slide it back into the slot so that the lip
of the retainer is up and the oval is down.
The retainer holds the handset in place.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE HANDSET BATTERY PACK
1. Press the battery cover release.
Slide cover off.
Use only Uniden Battery
(model BT-990) supplied
with your phone.
2. Install the nickel-cadmium battery
with the label down.
3. Slide the battery cover forward
until it snaps into place.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CHARGING THE BATTERY PACK
M Initial battery charging
Before connecting your phone for the first time, charge the
rechargeable battery pack for 15-20 hours without interruption.
1. Place the handset on the base.
2. Make sure that status LED lights.
If the LED doesn’t light, be sure the AC
adapter is plugged in and the handset
makes good contact with the base
charging contacts.
M Charging optional battery packs
The base of your phone is equipped with a compartment for charging
an extra battery pack for use in your handset. You can obtain an
extra battery pack from your authorized Uniden dealer.
1. Position the battery pack so the contacts are face up.
Please visit your
authorized Uniden dealer
to obtain an extra battery
pack or contact the
Uniden Parts Department
at (800) 554-3988. Hours
are from 8:30 a.m. to
5:00 p.m. Central
2. Slide the battery pack into
the charging compartment until
it locks into place.
Standard Time, Monday
through Friday.
3. Charge the battery for 24 hours. When charging is complete, lift the
latch to remove the battery pack. To install the charged battery into the
handset, see INSTALLING THE HANDSET BATTERY PACK, page 10.
In the event of a power failure, your spare battery
pack temporarily provides power for the base so you
can still use your phone.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
M Low battery indicator
When the battery pack is very low and needs
to be charged, the phone is programmed to
eliminate some functions to save power. If the
phone is not in use, Low Battery flashes.
Low Battery
If the phone is in use, Low Battery flashes and the handset beeps.
All rechargeable nickel-cadmium batteries
develop a “memory effect.” The memory effect
gradually reduces your talk and standby time.
M To avoid Memory Effect
On a monthly basis, use the phone until the “Low Battery”
indicator display flashes. Then charge the battery for 15-20 hours.
With normal usage, your battery should last about one year.
CLEANING THE BATTERY CONTACTS
To maintain a good charge, clean all charging contacts on the handset
and base about once a month. Use a pencil eraser or other contact
cleaner. DO NOT use liquids or solvents; you may damage your phone.
SETTING THE PULSE-TONE SWITCH
Be sure the PULSE-TONE
switch is the TONE position unless
your local phone system
uses pulse dialing.
Most phone systems use
tone dialing. Check with
your local phone
company if you’re not
sure whether your
system is tone or pulse.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME CONTROLS
M Handset ringer volume
Remove the handset from the base.
Press the vol L or M key on the handset to
set the handset ringer volume. There are two
ringer volume settings; high and low.
To select the high volume setting,
press vol L. The following screen
Ringer High
displays:
To select the low volume setting,
press vol M. The following
screen displays:
Ringer Low
M Handset earpiece volume
There are three volume settings for the handset earpiece; high, normal
and low. The handset earpiece volume can be adjusted only during a call.
To lower the volume, press vol M. To raise the volume, press vol L.
The handset displays Volume High, Volume Normal or
Volume Low indicating the current volume setting.
M Base ringer volume
The ringer control for the base of your
EXS 9650 allows you to turn the ringer OFF
or to select LO or HI volume.
M Base speaker volume
To control the speaker volume of the
base, adjust the VOLUME slide switch
as desired.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE BELTCLIP
M To attach the beltclip
1. Remove the slot cover.
2. Insert the beltclip into the empty slot
and press down until it clicks.
M To remove the beltclip
1. Pull back on the release tab and
lift the beltclip up.
2. Replace the slot cover. You
can store either the beltclip
or slot cover in the bottom
of the base.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADSET INSTALLATION
Your phone may be used with an optional
headset, the Uniden HS910. To use this
feature, simply plug the headset plug into
the headset jack. Your phone is ready for
hands-free conversation.
Use only the Uniden
HS910 headset
specifically designed for
Spread Spectrum phones.
You may hear a buzz or
hum on other headsets.
If you are using an optional headset, you must still
use the handset keypad for phone operations.
AUTOMATIC DIGITAL CODE SECURITY
Keep headset wire away
from handset and
base antennas.
To prevent other parties from making unauthorized calls on your
phone line, a digital code was added to the EXS 9650. Your phone’s
handset and base share this code. This code is randomly set each time
you place the handset in the base. If the phone experiences a power
failure, you must reset the digital security code by placing the handset
in the base.
M To reset the digital security code
1. Restore power to the base.
2. Place the handset on the base.
The status LED flashes to
indicate that the digital security
code is reset.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING AND RECEIVING CALLS
M Basic 2-line operation
Handset On Base
Handset Off Base
Base Only
Fold out the front cover
of this owner’s manual
to use the CONTROLS
AND FUNCTIONS
diagram for reference.
To answer
a call
Press line 1 or
line 2.
Pick up handset.
Press any key.
1. Press line 1 or
line 2.
2. Listen for dial tone. 2. Listen for the dial
1. Press line 1 or
line 2.
1. Pickup handset.
2. Press line 1 or
line 2.
tone.
3. Dial the number.
3. Dial number.
3. Listen for dial tone.
4. Dial number.
or
1. Dial number.
2. Press line 1 or
line 2.
To make
a call
or
1. Pickup handset.
2. Dial number.
3. Press line 1 or
line 2.
Press line 1 or line 2, or return the
handset to the base (AutoStandby).
Press line 1 or
line 2.
To hang up
1. Pickup handset.
1. Press line 1 or
1. Press line 1 or
line 2.
line 2.
2. Press line 1 or
line 2.
2. Listen for dial tone. 2. Listen for the dial
tone.
3. Listen for dial tone. 3. Press redial.
3. Press redial.
4. Press redial.
or
1. Press redial.
2. Press line 1 or
line 2.
To redial
or
1. Pickup handset.
2. Press redial.
3. Press line 1 or
line 2.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
You must have a 2-line subscription
from your phone company to use the
2-line features.
When you have connected power and a telephone line to your
EXS 9650, the phone is in “Standby mode,” ready to receive and
make calls.
For clarity, the instructions in this Owner’s Manual designates line 1
unless the procedure requires using line 2. The same instructions apply
to line 2.
ANSWERING A CALL FROM THE BASE
1. The base rings. The
corresponding line 1 LED
on the base flashes.
2. Press the line 1 button and speak.
The base microphone is
located under the phone.
Position yourself
approximately 12 inches
away from the base and
speak clearly.
3. When you finish the call, press line 1 to
hang up.
ANSWERING A CALL FROM THE HANDSET
1. The handset rings and the
following screen appears:
(Call)
Line 1
2. Press line 1 to answer
your call.
3. When you finish the call press
line 1 on the handset, or return the
handset to the base.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING A CALL FROM THE BASE
1. Press line 1.
2. Dial the number on the keypad or use
the memory feature. (See USING
MEMORY DIALING, page 34.)
3. When you finish the call, press line 1 to hang up.
AutoStandby automat-
ically hangs up when you
place the handset on the
base. There is no need to
press line 1 or line 2 to
hang up.
MAKING A CALL FROM THE HANDSET
MOff-Hook Dialing
1. Pick up the handset.
2. Press line 1.
3. Dial the number on the keypad,
or use one of the memory features.
(See USING MEMORY DIALING, page 34).
4. When you finish the call, press line 1,
or return the handset to the base.
M On-Hook Dialing
1. Pick up the handset.
2. Dial the number on the keypad, or use one of the memory features.
(See USING MEMORY DIALING, page 34).
3. Press line 1.
4. When you finish the call, press line 1, or return the handset to
the base.
USING THE TONE FEATURE
If you are dialing in the pulse mode
and need to enter tone digits, press tone
then enter the digits. Once the call has
ended, tone mode is canceled and pulse
dialing resumes.
The tone feature applies
only when the base is set
to pulse.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FLASH AND CALL WAITING
If you have Call Waiting service and a
call waiting tone sounds, press flash to
accept the call. After a short pause you will
hear the new caller. To return to the
original caller, press flash again. The flash
function on the base and handset are
independent of each other. You can
use your flash feature from either the
handset or the base.
The flash feature does
not function when
line 1 and line 2 are on
a conference call. (See
the 3-WAY CONFEREN-
CING and 4-WAY
USING REDIAL
The redial key redials the last number dialed. The redialed number
can be up to 32 digits long.
1. To call the last number dialed from
the handset, press line 1, then press
redial.
CONFERENCING, pages
23 and 24.)
or
Press redial, then press line 1.
If any key is pressed before redial,
the last number will not redial.
2. To call the last number dialed from
the base, press line 1, then
press redial/p.
The EXS 9650 has two
independent Last Number
Redial memories, one in
the handset, the other in
the base.
If any key is pressed before redial/p,
the last number will not redial.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PLACING A CALL ON HOLD
Use either the keypad on the handset or the keypad on the base.
1. To place line 1 on hold at the
base, press hold. The line 1 LED turns
from green to red.
Do not use the base and
the handset keypads at
the same time to place a
call on hold.
2. To place line 1 on hold at the
handset, press hold/p.
The following screen appears:
(Hold)
Line 1
3. To pick up the call that is holding,
press line 1 on the base or handset.
USING THE MUTE FEATURE
You can mute your conversation from the base. This prevents the party
you are speaking to from hearing what you, or someone else in the
room, is saying.
For example, to use this privacy feature while using line 1.
1. Press mute. The line 1 LED
Do not press line 1 to
take the phone off mute
or you will disconnect
the call.
flashes red.
You can hear the party on line 1, but
they cannot hear you.
2. When you are ready to continue
your conversation with the party on
line 1, press mute again. The line 1 LED
changes to green.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PAGE FEATURE
To locate the handset when it is off the
base, press page/int’com on the base.
The handset beeps for 60 seconds.
The following screen appears:
Paging
To cancel the page, press page/int’com on the
base again.
Press int’com on the handset to
connect to the base. Press int’com again
on either the handset or the base to return
to standby.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2-LINE OPERATION
The handset and the base can be used on separate telephone lines at
the same time. For example, if the handset is on a call with line 1, you
can make, or receive calls, at the base on line 2.
The line 1 LED on the base blinks
green to indicate line 1 is In Use at
the handset.
When line 1 is In Use at the base
the LCD screen displays the following:
(Base)
Line 1
M Extension In Use
The Extension In Use feature prevents you from accidentally
interrupting a call.
If you attempt to make a call and another phone is In Use on
line 1, the handset LCD displays “In Use”. (The line 1 LED at the
base blinks.) If you press line 1, you will hear a beep. This warns
you the line is In Use. To make your call, you must use line 2.
When you attempt to
make a call, the EXS 9650
informs you if a line is
currently in use.
If you want to join a conversation, press the line
button twice which is in use. (The second press
should be while you hear a beep.)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3-WAY CONFERENCING
This feature lets you add a third
party to your conversation from
either the handset or the base.
For example, to add a party to the
current call on line 1 at the base:
The Flash feature does
not function when
the phone is in
1. Press hold to place the caller on
hold. The line 1 LED turns from
green to red.
Conference mode.
2. Press line 2.
3. Dial the number of the person you
want to add to the conversation.
When the person answers, you can
speak privately before bringing the
original caller back on the line.
4. Press the conference button to
the bring original call back on
line. The line 1 and line 2 LEDs
turn green.
The handset display shows:
(Conf Base)
Line 1 Line 2
If the third person’s number is busy or doesn’t answer,
press line 2 to hang up. Return to the original call
by pressing line 1.
5. To remove either caller from your conversation, ask one of the parties
to hang up. Press the corresponding line button to end the call.
Follow steps 1-5 to conference using the handset. When you return
the handset to the base, all calls are disconnected.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
4-WAY CONFERENCING
A fourth person, at either the
handset or the base, may be
added to a conference call.
For example, to add a fourth
party at the handset to an
ongoing conference call at the base:
1. Press hold. The line 1 and
line 2 LEDs turn red.
2. Press page/int’com to contact
the handset.
3. Press int’com on the handset
to answer the page.
4. Press conference at the base to
bring the party at the handset in on the
call. The line 1 and line 2 LEDs turn
green.
The following screen appears:
(Conference)
Line 1 Line 2
5. To remove either call from your conversation, ask one of the parties
to hang up. Press the corresponding line button to end the call.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR EXS 9650 INTERCOM
M Paging from the Base to the Handset
1. Press page/int’com on the base.
The handset beeps. (If no answer, press
page/int’com again to disconnect.)
When a call is on hold
at the handset, and the
base is paged, the base
will ring even when the
RING VOL switch is
set to OFF.
2. Press int’com on the handset
to answer the page.
3. To turn off the intercom, press
page/int’com on the base or
int’com on the handset.
M Paging from the Handset to the Base
The person at the handset
can join the conversation
by pressing the button for
the line in use twice.
1. Press int’com on the handset.
(If no answer, press int’com
to disconnect.)
2. At the base, press page/int’com
to answer the page.
Speak within 12 inches of the base
microphone.
3. To turn off the intercom, press page/int’com
at the base or int’com on the handset.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSFERRING A CALL
M From Handset to Base
1. To transfer a call from the handset
to the base, press hold/p.
The line 1 LED turns red.
2. On the handset, press int’com.
The following screen appears:
Paging Base
(Hold)
Line 1
The status LED flashes.
3. Answer at the base by pressing
page/int’com. You may then announce
the call with the intercom.
4. On the base, press line 1 to talk.
If no one is available to take the call at the base, return to the caller
by pressing line 1 or int’com on the handset to take a message or
complete the call.
M From Base to Handset
1. To transfer a call from the base to
the handset, press hold.
The line 1 LED turns red.
2. On the base, press page/int’com.
The following screen appears:
Paging
(Hold)
Line 1
The status LED flashes.
3. Answer at the handset by pressing
int’com. You may then announce
the call with the intercom.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4. On the handset, press line 1 to talk.
If no one is available to take the call at the handset, return to the
caller by pressing line 1 or page/int’com on the base ,to take a
message or complete the call.
TRAVELING OUT-OF-RANGE
As you begin to move too far from the base, you first hear a clicking
sound. As you travel further, the noise increases. If you travel out-of-
range, your call terminates.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
STORING A PHONE NUMBER IN MEMORY
Your EXS 9650 stores up to 10 name/numbers in the handset plus 10
numbers in the base. Memory locations are shared by both lines.
M On the Handset
1. Remove the handset from the base.
2. Press and hold memory for
two seconds.
The following screen appears:
Memory Store
1
>
2
3. Use the L and M keys or number
keypad to choose the memory location to
store a name/number.
4. Press select.
The following screen appears:
Store Name
T
5. Enter a name by using the L and M keys to scroll through the
character menu. Stop scrolling when you see the desired character. Use
the
or del key to clear a character and the key to move right or
<
>
to create a blank space.
6. When you have finished entering a
name, press select.
The following screen appears:
Store Number
T
The cursor flashes indicating
that the display is ready for a number
to be entered.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Enter the phone number with the number keypad (direct entry). Or
scroll through numbers with the L and M keys. Use the L and M
keys to enter symbols, such as dashes. Use the
position the cursor.
and keys to
<
>
When entering name/numbers, you may press
hold/p to enter a pause in the dialing sequence. The
display shows a P. The pause feature is useful for long
distance calling, credit card dialing, or any other
dialing sequence requiring a pause between digits.
The “-” does nothing to
the dialing sequence. It
simply allows you to
display a dash.
8. When you have finished entering
a name/number, press select.
Whenever you are using a
menu screen, you must
press a key within 20
seconds or the phone will
return to standby. You
may also press memory
to exit a memory menu
at any time.
The handset beeps and and displays
a confirmation screen.
Memory 1 Stored
M On the Base
1. Press memory. The status
LED blinks.
2. Dial the number you wish
to store.
3. Press memory. Enter the memory
location number (0-9) on the keypad. The
status LED stops flashing. A confirmation
beep indicates the number is stored.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING A PHONE NUMBER IN MEMORY
To edit a number you have stored in the handset:
1. Remove the handset from the base.
2. Press and hold memory for
two seconds.
The display shows the Memory Store
Memory Store
screen and any saved name/numbers.
1 JOHN SMITH
2 UNIDEN
>
3. Use the L and M keys or number
keypad to select the memory location you
would like to edit.
4. Press select.
The display shows the memory
location you have selected.
Edit Memory 1
Delete Memory 1
Go Back
>
5. Press select again to enter the Edit
If you select Go Back,
no changes are made and
the handset shows the
Memory Store screen.
Memory mode.
6. Edit the name with the L and M keys.
Use the L and M keys to enter symbols.
Use the
key to clear a character and
<
the key to move the cursor right.
>
30
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press select.
The following screen appears:
Store Number
T
8175551
A cursor flashes indicating that the display
is ready for the number to be edited.
8. Enter the phone number with the number keypad
(direct entry) or with the L and M keys.
Use the L and M keys to enter symbols.
Use the
and keys to move the
<
>
cursor left and right.
9. Press select.
Memory 01 Stored
The handset beeps and displays the
confirmation screen.
10. The display then returns to the Memory
Store screen. You may select another
number to edit (return to step 3) or press
memory to return to standby.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
ERASING A NUMBER FROM MEMORY
After erasing a number, you may add a new address to memory.
M From the Handset
1. Remove the handset from the base.
2. Press and hold memory for
two seconds.
The handset shows the Memory
Store screen with saved name/numbers
displayed.
Memory Store
1 JOHN SMITH
2 UNIDEN
>
3. Use the L and M keys, or number
keypad, to select the memory location you
would like to delete. The
and keys
<
>
toggle between the name display and the
number display.
4. Press select.
The following screen appears:
Edit Memory 1
Delete Memory 1
Go Back
>
5. Use the M key to move the cursor
>
Edit Memory 1
Delete Memory 1
Go Back
to Delete Memory.
>
>
If you select No, no
changes are made and
the handset shows the
Memory Store screen.
6. Press select.
Delete Memory ?
Yes
No
7. Use the L key to move the
>
cursor to Yes.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Press select.
There is confirmation tone.
Memory 1 Deleted
The following screen appears:
9. The display then returns to the
Memory Store screen. You may select
another number to delete (return to step
3) or you may press memory
to return to standby.
M From the Base
1. Press memory. The status
LED blinks.
2. Press memory again. Enter the
memory location (0-9) of the number you
wish to delete. The status LED quits
flashing. A confirmation beep indicates
the number has been erased.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
USING MEMORY DIALING
Follow the steps below to dial a number using a programmed
memory location:
M From the Handset
1. Press memory.
The handset displays your programmed
memory locations.
1
2 JOHN SMITH
3 UNIDEN
>
2. Use the L and M keys to select the
memory location you would like to dial.
Or, you may enter the memory location
number from the keypad.
The following screen appears:
1
2 JOHN SMITH
>
3 UNIDEN
3. Press line 1. The number dials.
or
1. Press line 1. Listen for the dial tone.
2. Press memory.
3. Enter the memory location number from the keypad.
The number dials.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
M At the Base
1. Press line 1. The line 1 LED lights.
2. Press memory. Enter the memory
location number (0-9), to dial
the number.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE CHART
If your phone is not performing to your expectations, please try these
simple steps before calling Uniden customer service at (800) 297-1023.
PROBLEM
SUGGESTION
The charge light
won’t come on
when the handset
is placed in
G
G
G
Make sure the AC adapter is plugged into the
base and wall outlet.
Make sure the handset is properly seated
in the base.
the base.
Make sure the charging contacts on the
handset and base are clean.
The audio sounds
weak and/or
scratchy.
G
G
Make sure that the base antenna is in a
vertical position.
Move the handset and/or base to a different
location away from metal objects or
appliances and try again.
Can’t make or
receive calls.
G
G
G
G
Check both ends of the base telephone
line cord.
Make sure the AC adapter is plugged into the
base and wall outlet.
Disconnect the AC adapter for a few minutes,
then reconnect it.
Place the handset back on the charging cradle
for a few seconds. The status LED blinks
indicating that the phone has been reset.
The handset
doesn’t ring or
receive a page.
G
The Nickel-Cadmium battery pack may be
weak. Charge the battery on the base for
15-20 hours.
G
G
Be sure the antenna is in a vertical position.
The handset may be too far away from the
base. Place the base away from appliances or
metal objects.
G
Place the handset back on the charging cradle
for a few seconds. The status LED blinks
indicating that the phone has been reset.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL
The EXS 9650 complies with FCC Parts 15 and 68.
Frequency control:
Modulation:
PLL
Direct Sequence Spread Spectrum;
DBPSK
Operating temperature:
0º to +50º C (+32º F to +122º F)
BASE UNIT
Frequency:
904.2 to 925.8 MHz (20 channels)
10V 500 mA (from AC adapter)
Power requirements:
Size:
7-3/8 in.(W) x 3-1/2 in. (D)
x 8-3/4 in. (H)
Weight: Approx. 110.9 oz. (including optional battery)
HANDSET
Frequency:
904.2 to 925.8 MHz (20 channels)
Power requirements:
Rechargeable Nickel-Cadmium
battery pack
Size (without antenna):
2-1/4 in. (W) x 1-3/4 in. (D)
x 7-1/4 in. (H)
Weight:
Approx. 9.3 oz. (including battery)
Battery:
BT-990
Capacity
600 mAH, 3.6V
4 hours
Talk mode
Standby mode
7 days
Specifications, features, and availability of optional
accessories are all subject to change without prior notice.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we’ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding the operation
of this unit, available accessories, or any other related matters.
Hours M-F 7:00 a.m. to 7:00 p.m. CST
Thank you for purchasing a Uniden product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Covered by one or more of the following patents:
4,511,761
5,426,690
5,650,790
5,717,312
4,523,058
5,434,905
5,660,269
5,754,407
4,595,795
5,491,745
5,661,780
5,768,345
4,797,916
5,533,010
5,663,981
5,787,356
5,381,460
5,574,727
5,671,248
5,838,721
1999 Uniden America Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
All rights reserved. • Printed in China UCZZ01602BZ
|