Uniden Cordless Telephone EXP4241 User Manual

EXP 4240/4241  
Series  
OWNER'S  
MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Uniden 2.4GHz cordless phones are designed and engineered to exacting standards for  
reliability, long life, and outstanding performance.  
NOTE: Illustrations in this manual are used for explanation purposes. Some illustrations in this  
manual may differ from the actual unit. The color of your cordless phone may vary.  
Features  
Last Number Redial  
10-Number Memory  
Dialing  
Hearing Aid Compatible  
Find Handset Locator  
2.4 GHz Extended  
Range Technology  
AutoTalkTM  
AutoStandbyTM  
Pulse/Tone Dialing  
20 Channel Autoscan  
Earpiece Volume Control  
The cordless phone features AutoTalkTM and AutoStandbyTM. AutoTalkTM allows you to  
answer a call by just removing the handset from the base so you don't have to waste time  
pushing buttons. AutoStandbyTM allows you to hang up by simply returning the handset to the  
base.  
The UltraClear PlusTM true compander circuitry virtually eliminates background noise.  
This innovative technology, together with 20 different channels, provides you with the best  
possible reception during all your conversations.  
To protect you against misbilled calls which might result from your phone being activated by  
other equipment, the cordless phone has Random CodeTM digital security which automatically  
selects one of approx. 262,000 digital security codes for the handset and base. Also, the  
AutoSecureTM feature electronically locks your phone when the handset is in the base.  
If you have any trouble with your phone, call our Customer Hotline at 1- 800-297-1023, Mon-  
Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on holidays.)  
For more information on Uniden products and accessories, be sure to visit our web site:  
Uniden® is a registered trademark of Uniden America Corporation.  
AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of  
Uniden America Corporation.  
Controls and Functions  
5. Flash - accesses call waiting (if available)  
(p. 5)  
1
2
14  
6. /tone - switches to tone dialing in pulse  
*
10  
11  
dial mode (p. 6)  
4
5
7. Redial/p - redials the last number /  
adds a timed pause in a memory  
dialing sequence. (p. 5, 6)  
3
8. Memory - enters or recalls numbers in  
memory (p. 6, 7)  
9. Handset Microphone  
6
7
8
10. Talk - answers or places calls (p. 5)  
11. End - hangs up a phone call / mutes  
the ringing tone temporarily (p. 5)  
12. Channel - selects another channel for  
clearer reception (p. 5)  
13. Handset charging contacts  
14. Base charging contacts  
15 16  
12  
9
13  
1. Handset antenna  
2. Handset earpiece  
3. Talk/batt low LED - indicates when phone  
is in use or the battery is low  
15. Find hs - locates the handset (p. 6, 7)  
16. Charge / in use LED  
4. Vol/  
- sets the ringer tone and  
earpiece volume (p. 5)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Included with Your Phone  
• Base Unit • Handset • AC Adapter • Rechargeable Battery Telephone Cord  
• This owner’s manual  
Replacement adapters, batteries and other parts may be purchased by calling the Customer  
Hotline at 1-800-297-1023, Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support  
is closed on holidays.)  
Terminology  
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the  
terminology explanation.  
Talk Mode - The handset is off the base and the talk key has been pressed, enabling a dial  
tone.  
Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk  
key has not been pressed and there is no dial tone.  
Accessibility  
Uniden provides a customer service hotline for accessibility questions. If you have a disability  
and need customer service assistance or if you have any questions about how Uniden's  
products accommodate persons with disabilities, please call the accessibility voice/TTY line:  
1-800-874-9314  
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can  
leave a message, and we will call you back. Information is also available on our web site,  
Installing the Phone  
Do the following steps:  
A. Choose the best location  
B. Install the rechargeable battery pack into the handset  
C. Connect the base unit and charge the handset  
D. Mount the base unit on a wall  
E. Choose the dialing mode  
A. Choose the best location  
When choosing a location for your new phone, here are some important guidelines you should consider:  
Avoid noise sources such as a window  
Avoid heat sources, such as  
by a street with heavy traffic  
radiators, air ducts, and sunlight  
Avoid microwave ovens  
Avoid television sets and  
Avoid excessive moisture,  
other electronic equipment  
extremely low temperatures,  
dust, mechanical vibration,  
or shock  
Avoid personal computers  
Choose a central location  
Avoid other cordless telephones  
The location should be close to both a phone jack and a continuous power outlet (one  
which is not connected to a switch).  
The base and handset should be kept away from sources of electrical noise such as  
motors and fluorescent lighting.  
The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For bet-  
ter reception, place the base as high as possible.  
The base should be placed in an open area for optimum range and reception.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
B. Install the rechargeable battery pack into the handset  
The handset is powered by a rechargeable battery pack. The battery recharges  
automatically when the handset is placed in the base unit.  
NOTE: If your home has specially wired alarm equipment  
connected to the telephone line, be sure that  
installing the system does not disable your alarm  
equipment. If you have questions about what will  
disable your alarm equipment, contact your  
telephone company or a qualified installer.  
1) Press down on the handset battery case cover (use the  
finger indention for a better grip) and slide the cover  
downward to remove.  
2) Plug the battery pack connector (red & black wires) into  
the jack inside the battery compartment (the connector  
notches fit into the grooves of the jack only one way).  
Match the wire colors to the polarity label in the battery  
compartment, connect the battery and listen for a click to  
insure connection.  
3) Before replacing the battery cover, pull on the battery  
wires slightly. If the connection is secure, the jack will  
stay in place. Then place the battery case cover back on  
the handset by sliding it upwards until it clicks into place.  
NOTE: For optimum performance, use only the Uniden  
Battery (BT-905 or BT-1006) supplied with your  
phone.  
Talk and Standby Times  
With average use, your handset battery provides  
approximately 6 hours of talk time and approximately 7 days  
of standby time. When your handset is not being used and is  
left off of the charging cradle, the battery will gradually  
discharge. You can achieve optimum battery life and  
performance by returning the handset to the charging cradle  
after each use. If the handset is left off of the charging cradle, the actual talk time duration will  
be reduced respective to the amount of time the handset is off of the charging cradle.  
C. Connect the base unit and charge the handset  
1) Connect the AC adapter to the DC IN 9V jack and a  
standard 120V AC wall outlet.  
Route the cord.  
2) Set the base unit on a desk or tabletop, and place  
the handset in the base unit with the keypad facing  
forward.  
3) Make sure the charge/in use LED illuminates.  
If the LED does not illuminate, check to see that the  
AC adapter is plugged in and the handset makes  
good contact with the base charging contacts.  
NOTICE: Do not place the power cord where it creates  
a trip hazard or where it could become  
chafed and create a fire or electrical hazard.  
NOTE: Use only the supplied AD-0001 AC  
adapter. Do not use any other AC adapter.  
• Connect the AC adapter to a continuous  
power supply.  
• Place the base unit close to the AC outlet to  
avoid long extension cords.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4) Charge your handset at least 15-20 hours before plugging the phone line.  
5) Once the handset battery pack is fully charged,  
connect the telephone line cord to the TEL LINE  
jack and a telephone outlet. If your  
telephone outlet isn’t modular, contact  
your telephone company for assistance.  
Modular  
D. Mount the base unit on a wall  
Standard wall plate mounting  
1
3
This phone can be mounted on any standard wall plate.  
1) Plug the AC adapter to the DC IN 9V jack.  
2) Plug the AC adapter into a standard 120V AC wall  
outlet.  
3) Plug the telephone line cord into the TEL LINE jack.  
5
5
4) Plug the telephone line cord into the telephone outlet.  
5) Align the mounting slots on the base with the  
mounting posts on the wall. Then push in and down  
until the phone is firmly seated.  
4
2
Direct wall mounting  
If you don't have a standard wall plate, you can mount your phone  
directly to the wall. Before doing this, consider the following:  
Avoid electrical cables, pipes, or other items behind the mounting  
location that could cause a hazard when inserting screws into the  
wall.  
Try to mount your phone within 5 feet of a working phone jack to  
avoid excessive cord lengths.  
Make sure the wall material is capable of supporting the weight of  
the base and handset.  
Use #10 screws (minimum length of 1-3/8 inches) with anchoring  
devices suitable for the wall material where the base unit will be  
placed.  
1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/  
16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for  
mounting the phone.  
2) Refer to steps 1 through 5 above to mount the telephone.  
E. Choose the dialing mode  
Most phone systems use tone dialing. However, some phone systems (such as in rural areas)  
still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default  
setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to  
change the dialing mode:  
1) In standby mode, press and hold the flash key until you hear a confirmation tone.  
2) Press the # key to set your phone for pulse dialing. You will hear a confirmation tone.  
If you need to reset your phone to tone dialing, press and hold the flash key until you hear the  
confirmation tone. Then press the /tone key to restore the tone setting.  
*
NOTE: • Make sure your battery pack is fully charged before choosing the dial mode.  
• If you are not sure of your dialing system, make a trial call. If the call  
connects, leave the setting at tone dialing. Otherwise, set for pulse dialing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Using Your Phone  
Making and Receiving Calls  
Making a call  
1) Remove the handset from the base.  
2) Press the talk key. The talk/batt low LED flashes and turns on.  
3) Listen for the dial tone.  
4) Dial the number.  
Receiving a call  
If the handset is in the base, simply remove the handset from the base. AutoTalk will  
automatically answer the call.  
If the handset is off the base, press the talk key or any number key.  
Hanging up  
Press the end key or return the handset to the base.  
Redialing the last dialed number  
1) Remove the handset from the base.  
2) Press the talk key. The talk/batt low LED flashes and turns on.  
3) Listen for the dial tone.  
4) Press the redial/p key.  
Flash and Call Waiting  
If you have Call Waiting and a call waiting tone sounds while you are  
on a call, press the flash key to accept the waiting call. There is a  
short pause, and you will hear the new caller. To return to the original  
caller, press the flash key again.  
NOTE: You must subscribe to call waiting through your telephone  
company.  
Adjusting the Ringer and Earpiece Volume  
Ringer tone and volume  
When the phone is in standby mode, press the vol/  
key repeatedly to listen to the four  
ringer tones and volume combinations. The last ringer tone heard will be selected as the  
phone’s ring tone setting.  
Earpiece volume  
The handset earpiece volume settings can only be adjusted during a call. Use the vol/  
key  
to scroll through the volume levels and select the one that works best for you. When you hang  
up, the phone keeps the volume setting.  
Temporarily Mute Ringer  
If the handset is off the base, simply press the end key to temporarily mute the incoming ring.  
The ringer will sound with the next incoming call.  
Traveling Out-of-Range  
During a call, as you begin to move your handset too far from your base unit, noise increases.  
If you pass the range limits of the base, your call will terminate within one minute.  
Selecting a Different Channel  
If you encounter interference while using your phone, you can manually change the phone’s  
channel for clear operation. This function works only when the phone is in use.  
Press the channel key. The talk/batt low LED flashes, indicating the phone is changing to  
another channel. For more information on interference, refer to “Radio Interference” on  
page 10.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
           
Find Handset  
To locate the handset, press the find hs key on the base. The handset beeps for 60 seconds.  
The handset stops beeping when any key is pressed, when it is returned to the base, or when  
the find hs key is pressed. The handset also stops beeping when an incoming call is received.  
Low Battery Alert  
When the battery pack is very low and needs to be charged, the phone is programmed to  
eliminate functions in order to save power. If the phone is not in use, the talk/batt low LED  
flashes when the battery pack is low.  
If the phone is in use, the talk/batt low LED flashes and the handset beeps. Complete your  
conversation as quickly as possible and return the handset to the base for charging.  
NOTE: • Even when the battery pack is not being used, it will gradually discharge over a long  
period of time. For optimum performance, be sure to return the handset to the base  
unit after each telephone call.  
• Dial mode setting, last number dialed and numbers stored in memory locations  
are retained for up to one minute while you replace the battery pack.  
Cleaning the battery charging contacts  
To maintain a good charge, clean the charging contacts on the  
handset once a month.  
Dampen a cloth with plain water. Gently rub the damp cloth over  
the charging contacts until all visible dirt is removed. Dry the  
contacts thoroughly before returning the handset to the base.  
Caution: Do not use paint thinner, benzene, alcohol, or other  
chemical products. Doing so may discolor the surface of the  
telephone and damage the finish.  
Tone Dialing Switch-over  
If your telephone company requires pulse dialing, you can switch over  
to tone dialing after the call connects. This feature is useful when you  
need tone dialing to use any automated menu systems, such as  
telephone bank tellers, telephone prescription refills, customer support  
menus, etc.  
If your phone is set to pulse dialing mode, make your call normally.  
Once your call connects, press the /tone key. Any digits you enter  
*
from then on will be sent as tone digits. When this particular call ends,  
the phone automatically returns to pulse dialing mode.  
Using the Speed Dial Memory  
Storing Numbers in Speed Dial Memory  
Your cordless phone can store up to ten numbers in the speed dial memory.  
1) When the phone is in standby mode, press the memory key. The talk/batt low LED flashes.  
2) Use the keypad to enter the phone number; each number can be up to 20 digits.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
       
3) If you need the phone to pause during the dialing sequence, press  
the redial/p key to insert a two-second delay between the  
numbers. You can enter multiple pauses to increase the delay.  
Each pause counts as a digit.  
4) Press the memory key again.  
5) To store this number as one of the ten speed dial numbers, enter a  
digit from 0 to 9. If there is already a number in that speed dial  
setting, it will overwrite the previously stored number without  
warning. You will hear a confirmation tone indicating that the  
number has been stored.  
NOTE: When storing numbers into memory, if the handset is idle  
(i.e., no key is pressed) for more than 30 seconds, it will beep rapidly, and the phone  
will return to standby mode.  
Dialing a Stored Number  
1) When the phone is in standby mode, press the talk key, and listen for a dial tone.  
2) Press the memory key and enter the speed dial entry (0-9) that has the stored number you  
want to dial. (If you enter a digit that does not contain a stored number, the handset will  
beep rapidly, and the phone will not dial.)  
Chain Dialing  
The speed dial memory is not limited to phone numbers. You can store any number (up to 20  
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.  
For example, you can save your bank account number to speed dial memory. When you call  
your bank's telephone teller service and are prompted to enter your account number, simply  
press the memory key and the speed dial number where you stored your account number.  
Erasing a Stored Number from Memory  
1) With the phone in standby mode, press the memory key twice.  
2) Press the number of the speed dial entry. A tone indicates that the stored number is  
erased from memory.  
Changing the Digital Security Code  
The digital security code is an identification code used to connect the handset and the base  
unit. Normally, setting the code is not necessary.  
The first time you charge your handset, the security code is automatically set. In the rare  
situation that you suspect another cordless telephone is using the same security code, you  
can change the code.  
1) Remove the handset from the base unit. Press and hold the find hs key on the base.  
2) While holding the find hs key, place the handset in the base unit. Leave the handset in the  
base for more than three seconds. A new random security code is set.  
NOTE: If the handset battery pack is completely discharged or the battery pack is removed,  
the digital security code will be lost. If this happens, a new security code is set  
automatically next time the battery pack is charged.  
Operational Frequency  
Frequency  
924.516925 – 926.704425 MHz  
2,405.155942 – 2,411.718441 MHz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
   
Troubleshooting  
If your cordless telephone is not performing to your expectations, please try these simple  
steps first. If these steps do not solve your problem, please call our Customer Hotline at 1-  
800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed  
on holidays.)  
NOTE: Do not attempt to service this unit yourself. Servicing must be performed by qualified  
personnel.  
Symptom  
Suggestion  
The charge/in use LED won’t  
illuminate when the handset is  
placed in the base.  
Make sure the AC adapter is plugged into the base and a wall outlet.  
Make sure the handset is properly seated in the base.  
Make sure that the charging contacts on the handset are clean.  
The audio sounds weak and/or  
scratchy.  
Move the handset and/or base away from metal objects or  
appliances and try again.  
Press the channel key to help eliminate background noise.  
Check both ends of the telephone line cord.  
Can’t make or receive calls.  
Make sure the AC adapter is plugged into the base and a wall outlet.  
Disconnect the AC adapter for a few minutes. Then reconnect it.  
Change the digital security code. (see page 7.)  
Make sure that the handset is not too far from the base.  
Check the dialing mode used by your telephone company.  
The handset doesn’t ring or  
receive a page.  
The battery pack may be weak. Charge the battery for 15-20 hours.  
The handset may be too far away from the base.  
Move the base away from appliances or metal objects.  
Change the digital security code. (see page 7.)  
Severe noise interference  
Keep the handset away from microwave ovens, computers, remote  
control toys, wireless microphones, alarm systems, intercoms, room  
monitors, fluorescent lights, and electrical appliances.  
Move the base to another location or turn off the source of  
interference.  
Liquid Damage  
Moisture and liquid can damage your cordless phone. In case of accidental submersion,  
please follow these steps.  
Case  
Action  
If the handset or base is exposed Wipe off the liquid, and use as normal.  
to moisture or liquid, but it only  
affects the exterior plastic housing.  
If moisture or liquid has entered the Handset:  
1. Remove the battery cover and leave it off for ventilation.  
plastic housing (i.e. liquid can be  
heard in the phone or liquid has  
entered the handset battery  
compartment or vent openings on  
the base).  
2. Remove the battery pack by disconnecting.  
3. Leave the battery cover off and the battery pack disconnected for at  
least 3 days.  
4. Once the handset is completely dry, reconnect the battery pack and the  
battery cover.  
5. Recharge the handset’s battery pack for 20 hours before using again.  
Base:  
1. Disconnect the AC adapter from the base unit, cutting off electrical  
power.  
2. Disconnect the telephone cord from the base unit.  
3. Let dry for at least 3 days.  
IMPORTANT: You must unplug the telephone line while recharging the  
battery pack to avoid charge interruption.  
CAUTION:  
DO NOT use a microwave oven to speed up the drying process. This will  
cause permanent damage to the handset, base and the microwave oven.  
After following these steps, if your cordless telephone does not work,  
please call our Customer Service Hotline at 1-800-297-1023.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
SAVE THESE INSTRUCTIONS  
CAUTION  
Risk of explosion if battery is replaced by an incorrect type.  
Dispose of used batteries according to the instructions. Do not  
open or mutilate the battery, and disconnect the battery before  
shipping this product.  
Precautions!  
Before you read anything else, please observe the following:  
Warning!  
Uniden America Corporation DOES NOT represent this unit to  
be waterproof. To reduce the risk of fire, electrical shock, or  
damage to the unit, DO NOT expose this unit to rain or moisture.  
The FCC Wants You To Know  
This equipment complies with Part 68 of the FCC rules and the  
requirements adopted by the ACTA. On the bottom of this  
equipment is a label that contains, among other information, a  
product identifier in the format US:AAAEQ##TXXXX. If  
requested, this number must be provided to the telephone  
company.  
An applicable Universal Service Order Codes (USOC)  
certification for the jacks used in this equipment is provided (i.e.,  
RJ11C) in the packaging with each piece of approved terminal  
equipment.  
A plug and jack used to connect this equipment to the premises  
wiring and telephone network must comply with the applicable  
FCC Part 68 rules and requirements adopted by the ACTA. A  
compliant telephone cord and modular plug is provided with this  
product. It is designed to be connected to a compatible modular  
jack that is also compliant. See installation instructions for  
details.  
The REN is used to determine the number of devices that may  
be connected to a telephone line. Excessive RENs on a  
telephone line may result in the devices not ringing in response  
to an incoming call. In most but not all areas, the sum of RENs  
should not exceed five (5.0). To be certain of the number of  
devices that may be connected to a line, as determined by the  
total RENs, contact the local telephone company. For products  
approved after July 23, 2001, the REN for this product is part of  
the product identifier that has the format US:AAAEQ##TXXXX.  
The digits represented by ## are the REN without a decimal  
point (e.g., 03 is a REN of 0.3). For earlier products, the REN is  
separately shown on the label.  
If this equipment causes harm to the telephone network, the  
telephone company will notify you in advance that temporary  
discontinuance of service may be required. But if advance notice  
isn’t practical, the telephone company will notify the customer as  
soon as possible. Also, you will be advised of your right to file a  
complaint with the FCC if you believe it is necessary.  
The telephone company may make changes in its facilities,  
equipment, operations or procedures that could affect the  
operation of the equipment. If this happens the telephone  
company will provide advance notice in order for you to make  
necessary modifications to maintain uninterrupted service.  
Please follow instructions for repairing, if any (e.g. battery  
replacement section); otherwise do not substitute or repair any  
parts of the device except as specified in this manual.  
Connection to party line service is subject to state tariffs. Contact  
the state public utility commission, public service commission or  
corporation commission for information. This equipment is  
hearing aid compatible.  
Rechargeable Nickel-Cadmium Battery  
Warning  
• This equipment contains a rechargeable nickel-cadmium  
battery.  
• Cadmium is a chemical known to the State of California to  
cause cancer.  
• The rechargeable nickel-cadmium battery contained in this  
equipment may explode if disposed of in a fire.  
Do not short-circuit the battery.  
• Do not charge the rechargeable nickel-cadmium battery used  
in this equipment in any charger other than the one designed to  
charge this battery as specified in the owner’s manual.  
Using another charger may damage the battery or cause the  
battery to explode.  
Rechargeable Nickel-Cadmium  
Batteries Must Be Recycled or  
Disposed of Properly  
• Uniden voluntarily participates in an RBRC® industry program  
to collect and recycle nickel-cadmium batteries at the end of  
their useful life, when taken out of service within the United  
States.  
The RBRC® program provides a convenient alternative to  
placing used nickel-cadmium batteries into the trash or  
municipal waste stream, which is illegal in some areas.  
• Through the RBRC® program, Uniden makes it easy for you to  
drop off the used battery at local retailers of replacement  
nickel-cadmium batteries. You may also contact your local  
recycling center for information on where to return the used  
battery. Please call 1-800-8-BATTERY for information on Ni-Cd  
battery recycling in your area. Uniden's involvement in this  
program is part of its commitment to protecting our  
environment and conserving natural resources.  
• RBRC® is a registered trademark of the Rechargeable Battery  
Recycling Corporation.  
The exclamation point within an equilateral triangle  
is intended to alert the user to the presence of  
important operating and maintenance (servicing)  
instructions in the literature accompanying the  
appliance.  
Uniden works to reduce lead content in our PVC coated cords in  
our product and accessories.  
Warning!  
Should you experience trouble with this equipment, please  
contact Uniden customer service at 800-297-1023. If the  
equipment is causing harm to the telephone network, the  
telephone company may request that you disconnect the  
equipment until the problem is resolved.  
The cords on this products and/or accessories contain lead, a  
chemical known to the State of California to cause birth defects  
or other reproductive harm. Wash hands after handling.  
Important Safety Instructions  
NOTICE: According to telephone company reports, AC electrical  
surges, typically resulting from lightning strikes, are very  
destructive to telephone equipment connected to AC power  
sources. To minimize damage from these types of surges, a  
surge arrestor is recommended.  
Changes or modifications to this product not expressly approved  
by Uniden, or operation of this product in any way other than as  
detailed by the owner's manual, could void your authority to  
operate this product.  
This device complies with part 15 of the FCC rules. Operation is  
subject to the following two conditions: (1) This device may not  
cause harmful interference, and (2) This device must accept any  
interference received, including interference that may cause  
undesired operation. Privacy of communications, may not be  
ensured when using this phone.  
To insure the safety of users, the FCC has established criteria  
for the amount of radio frequency energy various products may  
produce depending on their intended usage. This product has  
been tested and found to comply with the FCCís exposure  
criteria. For body worn operation, the FCC RF exposure  
guidelines were also met when used with the Uniden  
accessories supplied or designed for this product. Use of other  
When using your telephone equipment, basic safety precautions  
should always be followed to reduce the risk of fire, electric  
shock and injury to persons, including the following:  
1. Do not use this product near water, for example, near a bath  
tub, wash bowl, kitchen sink or laundry tub, in a wet  
basement or near a swimming pool.  
2. Avoid using a telephone (other than a cordless type) during  
an electrical storm. There may be a remote risk of electric  
shock from lightning.  
3. Do not use the telephone to report a gas leak in the vicinity of  
the leak.  
4. Use only the power cord and batteries indicated in this  
manual. Do not dispose of batteries in a fire. They may  
explode. Check with local codes for possible battery disposal  
instructions.  
5. Do not disassemble any component of this product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
accessories may not ensure compliance with FCC RF exposure  
guidelines and should be avoided.  
One Year Limited Warranty  
Important:Evidence of original purchase is required for warranty  
service.  
Radio Interference  
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the  
original retail owner, this Uniden Product to be free from defects in  
materials and craftsmanship with only the limitations or exclusions  
set out below.  
WARRANTY DURATION: This warranty to the original user shall  
terminate and be of no further effect 12 months after the date of  
original retail sale. The warranty is invalid if the Product is (A)  
damaged or not maintained as reasonable or necessary, (B)  
modified, altered, or used as part of any conversion kits,  
subassemblies, or any configurations not sold by Uniden, (C)  
improperly installed, (D) serviced or repaired by someone other than  
an authorized Uniden service center for a defect or malfunction  
covered by this warranty, (E) used in any conjunction with  
equipment or parts or as part of any system not manufactured by  
Uniden, or (F) installed or programmed by anyone other than as  
detailed by the owner’s manual for this product.  
STATEMENT OF REMEDY: In the event that the product does not  
conform to this warranty at any time while this warranty is in effect,  
warrantor will either, at its option, repair or replace the defective unit  
and return it to you without charge for parts, service, or any other  
cost (except shipping and handling) incurred by warrantor or its  
representatives in connection with the performance of this warranty.  
Warrantor, at its option, may replace the unit with a new or  
refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE  
IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE  
PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER  
WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER  
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,  
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES  
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE  
FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES. Some states do not allow this  
exclusion or limitation of incidental or consequential damages so the  
above limitation or exclusion may not apply to you.  
Radio interference may occasionally cause buzzing and  
humming in your cordless handset, or clicking noises in the  
base. This interference is caused by external sources such as  
TV, refrigerator, vacuum cleaner, fluorescent lighting, or  
electrical storm. Your unit is NOT DEFECTIVE. If these noises  
continue and are too distracting, please check around your  
home to see what appliances may be causing the problem. In  
addition, we recommend that the base not be plugged into a  
circuit that also powers a major appliance because of the  
potential for interference. Be certain that the antenna on the unit  
is fully extended when needed.  
In the unlikely event that you consistently hear other voices or  
distracting transmissions on your phone, you may be receiving  
radio signals from another cordless telephone or other source of  
interference. If you cannot eliminate this type of interference,  
you need to change to a different channel.  
Finally, it should be noted that some cordless telephones  
operate at frequencies that may cause interference to nearby  
TVs and VCRs. To minimize or prevent such interference, the  
base of the cordless telephone should not be placed near or on  
top of a TV or VCR. If interference is experienced, moving the  
cordless telephone farther away from the TV or VCR will often  
reduce or eliminate the interference.  
Cordless Telephone Privacy  
Cordless telephones are radio devices. Communications  
between the handset and base of your cordless telephone are  
accomplished by means of radio waves which are broadcast  
over the open airways.  
Because of the inherent physical properties of radio waves, your  
communications can be received by radio receiving devices  
other than your own cordless telephone unit. Consequently, any  
communications using your cordless telephone may not be  
private.  
LEGAL REMEDIES: This warranty gives you specific legal rights,  
and you may also have other rights which vary from state to state.  
This warranty is void outside the United States of America and  
Canada.  
I.C. Notice  
TERMINAL EQUIPMENT  
Notice:This equipment meets the applicable Industry  
Canada Terminal Equipment Technical Specifications.  
This is confirmed by the registration number. The abbreviation,  
IC, before the registration number signifies that registration was  
performed based on a Declaration of Conformity indicating that  
Industry Canada technical specifications were met. It does not  
imply that Industry Canada approved the equipment.  
PROCEDURE FOR OBTAINING PERFORMANCE OF  
WARRANTY: If, after following the instructions in the owner’s  
manual you are certain that the Product is defective, pack the  
Product carefully (preferably in its original packaging). Disconnect  
the battery from the Product and separately secure the battery in its  
own separate packaging within the shipping carton. The Product  
should include all parts and accessories originally packaged with  
the Product. Include evidence of original purchase and a note  
describing the defect that has caused you to return it. The Product  
should be shipped freight prepaid, by traceable means, to warrantor  
at:  
Notice:The Ringer Equivalence Number (REN) for this  
terminal equipment is marked on the equipment itself. The  
REN assigned to each terminal equipment provides an  
indication of the maximum number of terminals allowed to  
be connected to a telephone interface. The termination on  
an interface may consist of any combination of devices  
subject only to the requirement that the sum of the Ringer  
Equivalence Numbers of all the devices does not exceed  
five.  
Uniden America Service  
4700 Amon Carter Blvd. Fort Worth, TX 76155  
RADIO EQUIPMENT  
The term "IC:" before the radio certification number only signifies  
that Industry Canada technical specifications were met.  
Operation is subject to the following two conditions: (1) this  
device may not cause interference, and (2) this device must  
accept any interference, including interference that may cause  
undesired operation of the device. "Privacy of communications  
may not be ensured when using this telephone".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
 
Having Trouble or Need a Part?  
Our customer care specialists are here to help you! Visit our website at  
,
Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5 p.m. CST. (Phone  
support is closed on holidays.)  
4,797,916 5,426,690 5,434,905 5,491,745 5,493,605 5,533,010  
5,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,981  
5,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,289  
5,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,619  
5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358  
5,987,330 6,044,281 6,070,082 6,125,277 6,253,088 6,314,278  
6,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,920  
6,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,940  
6,953,118 7,023,176  
Other patents pending.  
©2006 Uniden America Corporation, Fort Worth, Texas  
Printed in China.  
Contains additional foreign articles.  
UPZZ01077ZZ(0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Automobile Parts 110600 User Manual
Telex Speaker 309 series User Manual
Thermo Products Burner MG 1018 User Manual
Toro Lawn Mower 09167SL User Manual
Toshiba Projector TDP T420 User Manual
TP Link Network Router TL R480T+ User Manual
Tripp Lite Computer Hardware F200 003 R User Manual
True Fitness Exercise Bike LC900 User Manual
Venturer Home Theater System ASR150 User Manual
Vizio Cable Box VX200E User Manual