Download from Www.Somanuals.com. All Manuals Search And Download.
Guía de programación
EXI4560/EXI4561
3° Paso Preparación de la base
5° Paso Conexión de la línea telefónica
Características adicionales
Conecte un
extremo de la
línea telefónica en
el enchufe TEL
LINE en la base.
Para más información sobre estas y otras
características, le rogamos que consulte su
Manual del usuario. Para su conveniencia, hemos
listado abajo unas características importantes, las
cuales le ayudarán a programar su nuevo teléfono
inalámbrico de Uniden.
Conecte el adaptador CA
en el enchufe (amarillo) DC
IN 9V.
1° Paso Inspección del contenido del embalaje
Asegúrese de que haya recibido los
siguientes artículos en el paquete
Pase el cable
Al enchufe
TEL LINE
Al enchufe telefónico
Cable de la línea
Programación del receptor/base:
telefónica (suministrado)
-
-
-
Ajuste del volumen del auricular y del
altavoz → P.25
Pase el cable
Base
Receptor Adaptador CA
A la toma CA
Conecte el otro
extremo en el
enchufe telefónico
de la pared.
Programación del volumen del timbre
Al enchufe
DC IN 9V
Pila
recargable
Cable
telefónico
Adaptador CA
(suministrado)
Programación de la marcación por
Conecte el adaptador CA en
una toma de ꢀ20V CA.
Además va incluido: • Manual del usuario
6° Paso Realización y recepción de llamadas
Identificación de llamadas (Caller ID):
Programe la Identificación de llamadas en
Nota: Usted debe estar suscrito al
servicio de Identificación de llamadas
con su proveedor de telefonía local para
poder usar las características de Caller
ID y de CIDCW
2° Instalación del paquete de pilas del receptor
Nota ¡Use SOLAMENTE el
adaptador CA de Uniden
suministrado con su
teléfono!
Para hacer una llamada
Nota ¡Use SOLAMENTE el
paquete de pilas recargable
de Uniden suministrado con
su nuevo teléfono!
Oprima
.
talk/flash
Espere por el tono de
marcación.
4° Paso Carga del receptor
Quite la tapa.
Marque el número
deseado.
Coloque el receptor
en la base.
Asegúrese de que el
LED de carga se
ilumine.
Para recibir una llamada
Consulte su manual del usuario para
operaciones más detalladas.
Para hacer preguntas u ordenar partes
genuinas y accesorios de Uniden, llame a
nuestra línea para atención al cliente en
el 1-800-297-1023.
Levante el receptor y
oprima
.
talk/flash
Conecte el
paquete de pilas
rojo negro
rojo
negro
con la polaridad
correcta.
Para colgar una llamada
Horario:
Reponga la tapa
Lunes - viernes: 7 de la mañana- 7 de la
tarde. Sábado/domingo: 9 de la mañana
- 5 de la tarde. No habrá ayuda telefónica
los días festivos. O, visite nuestra página
Oprima
o devuelva
end
el receptor a la base.
Cargue el receptor de 15 a 20
horas antes de usar el teléfono.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations on your purchase of the Uniden cordless telephone. This cordless phone is designed for reliability,
long life, and outstanding performance.
Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this
manual may differ from the actual unit. The color of your cordless telephone may vary.
Uniden® is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America Corporation.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer
service assistance or if you have any questions about how Uniden’s products can accommodate
persons with disabilities, please call the accessibility voice/TTY line:
ꢀ-800-874-9ꢁꢀ4.
the "Accessibility" link. If your call is received outside of our business hours, you can leave us a message and we will
call you back.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminology
Base
CID
The main part of the phone that connects to your phone line and lets you make and receive calls.
Caller ID is available from your telephone provider. With this service, you can see the name and number
of incoming callers.
Caller ID on Call Waiting is available from your telephone provider. With this service, you can see
incoming caller information while on another call.
CIDCW
Handset A cordless handset that can be placed anywhere in your home or office where AC power is available.
The handset may be sitting on the base charging or out of the base cradle, but is NOT in use.
[talk/flash] has not been pressed and there is no dial tone.
Standby
When a dial tone has been enabled allowing the user to dial and carry on a conversation with an outside
party.
Talk
Manual Conventions
This manual uses several different type styles to help you distinguish between different parts of the phone:
• lower case bold text with "[ ]" indicates a key or button on the phone
• ALL CAPITALS indicates text on the display, such as menu options, prompts, and confirmation messages
• lower case bold text indicates a status light on the phone base
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Main Phone Features
• 2.4 GHz Extended Range Technology
• Caller ID/Caller ID on Call Waiting
• ꢁ-Line Backlit LCD
• Tone/Pulse Dialing
• Page/Find Handset Key
• Earpiece/Ringer Volume Controls
• Trilingual Menu Displays (English, Spanish, or French) • Mute or Turn Ringer Off
• ꢁ0 Caller ID Memory
• ꢀ0 Number Memory Dialing
• Last Number Redial
• Hearing Aid Compatible
• 20-Channel Auto Scan
• Desk or Wall Mountable
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
Handset
1
ꢀ. Handset antenna
2. Handset battery compartment
ꢁ. Handset earpiece
4. LCD display
3
5. [vol/ / / ]
(volume & ringer up/down) key
6. [cid/menu] key
4
5
7. [ /tone/ ] (left cursor) key
8. [redial/pause] key
9. [select] key
ꢀ0. [memory] key
ꢀꢀ. [end] key
10
11
12
6
ꢀ2. [talk/flash] key
ꢀꢁ. [#/ ] (right cursor) key
ꢀ4. [delete/channel] key
ꢀ5. Handset ringer speaker
ꢀ6. Handset microphone
ꢀ7. Handset charging contacts
2
7
13
14
15
8
9
16
17
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Phone
Choosing the Best Location
Before choosing a location for your new phone, here are some important guidelines you should consider:
Avoid heat sources, such as radiators,
air ducts, and sunlight
Avoid noise sources such as a window by
a street with heavy traffic
Avoid television sets and other
electronic equipment
Avoid microwave ovens
Avoid excessive moisture,
extremely low temperatures, dust,
mechanical vibration, or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a
switch).
• The base and handset should be kept away from sources of electrical noise such as motors, microwave ovens,
and fluorescent lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For better reception, place the
base as high as possible.
• The base should be placed in an open area for optimum range and reception.
• If your home has specially wired alarm equipment connected to the telephone line, be sure that installing
the system does not disable your alarm equipment. If you have questions about what will disable your alarm
equipment, contact your telephone company or a qualified installer.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Rechargeable Battery Pack into the Handset
The handset is powered by a rechargeable battery pack. Once installed, the battery
charges automatically when the handset is placed in the base unit.
To install the rechargeable battery pack:
1) Press down on the handset battery case cover (use the finger indention for a better
grip) and slide the cover downward to remove.
2) Plug the battery pack connector (red & black wires) into the small jack inside the
battery compartment. (The connector notches fit into the grooves of the jack only
one-way.) Match the wire colors to the polarity label in the battery compartment,
connect the battery, and listen for a click to insure connection.
ꢁ) Make sure you have a good connection by slightly pulling on the battery wires. If
the connection is secure, the battery jack will remain in place.
4) Place the battery case cover back in the handset by sliding it upwards until it clicks
into place.
Note: Use only the Uniden (BT-1006) rechargeable battery pack supplied
with your phone.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Base Unit
ꢀ) Connect the AC adapter to the DC IN 9V jack and to the
standard ꢀ20V AC wall outlet.
Route the cord.
Note:
• Use only the supplied AD-0001 AC adapter. Do not
use any other AC adapter.
• Do not place the power cord where it creates a trip
hazard or where it could become chafed and create a
fire or electrical hazard.
2) Charge the handset by placing in the base unit with the keypad
facing forward.
Download from Www.Somanuals.coꢀmꢀ. All Manuals Search And Download.
ꢁ) Make sure that the in use/ LED illuminates. If the LED
does not illuminate, check to see that the AC adapter is
plugged in and that the handset makes good contact with
the base's charging contacts.
Note:
• Connect the AC adapter to a continuous power
supply (not controlled by a wall switch).
• Place the base unit close to the AC outlet to
avoid long extension cords.
• Charge your handset at least 15 - 20 hours
before plugging into the phone line.
Route the cord.
4) Once the handset battery pack is fully charged, connect
the telephone line cord to the TEL LINE jack and a
telephone outlet. If your telephone outlet isn't modular,
contact your telephone company for assistance.
Modular
ꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
ꢀ) Plug the AC adapter to the DC IN 9V jack.
2) Plug the AC adapter into a standardꢀ20V AC wall outlet.
ꢁ) Plug the telephone line cord into the TEL LINE jack.
4) Route the telephone line cord through the groove as shown.
5) Plug the telephone line cord into the telephone outlet.
6) Align the mounting slots on the base with the mounting posts on the
wall. Then push in and down until the phone is firmly seated.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct wall mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before
doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a
hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #ꢀ0 screws (minimum length of ꢀ-ꢁ/8 inches) with anchoring devices suitable for the wall
material where the base unit will be placed.
ꢀ) Insert two mounting screws into the wall (with their appropriate anchoring device), ꢁ-ꢀ5/ꢀ6
inches apart. Allow about ꢀ/8 of an inch between the wall and screw heads for mounting the
phone.
ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code,
Dial Mode and Language.
Activating AutoTalk
AutoTalk will allow you to answer the phone simply by removing the handset from the base. You do not have to press
a key to answer the incoming call.
To activate:
ꢀ) When the phone is in standby, press and hold [cid/menu]. The following screen appears.
2) Press [select] to turn AutoTalk on.
ꢁ) Press [end] or return the handset to the base unit to complete the setting. The handset
returns to standby.
Activating Caller ID on Call Waiting
Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call
Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must
subscribe to Caller ID service through your local telephone provider to use this feature.
ꢀ) When the phone is in standby, press and hold [cid/menu]. The following screen appears.
ꢀ5
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Press [vol/ / ] to move the pointer to select CIDCW.
ꢁ) Press [select] to toggle and turn on Caller ID on Call Waiting.
4) Press [end] and return the handset to the base unit to complete the setting. The handset
returns to standby.
Note: To enable the setting change of CIDCW, you need to return the handset to the base unit when
you complete the setting.
Programming Your Area Code
In some areas the telephone company may allow you to place a local call by dialing only 7 digits (instead of ꢀ0).
If this is the case in your area, you can program your local area code in your phone. Programming your area code
will allow you to see the caller’s 7-digit phone number which will allow you to easily return the local call without
modifying the number before dialing. If you get a call from outside your area code, you'll see all ꢀ0 digits.
To program your area code:
ꢀ) When the phone is in standby, press and hold [cid/menu]. The following screen appears.
2) Press [vol/ / ] to move the pointer to select AREA CODE.
ꢁ) Press [select]. If an area code was already stored, the phone will display it.
4) Use the number keys ( [0] – [9] ) to enter the ꢁ-digit area code.
If you make an error, use [delete/channel] to backspace.
5) Press [select]. A confirmation tone sounds.
6) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby.
ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing the Dialing Mode
Your phone can communicate with the telephone network in two different ways: tone dialing and pulse dialing. These
days, most telephone networks use a method called tone dialing, so your phone comes programmed for tone dialing
by default.
If your phone company uses pulse dialing, you'll need to change your phone's dial mode. There's an easy way to tell:
try making a call. If your call connects, your phone's setting is fine. If not, you may need to change the dial mode.
To change the dial mode:
ꢀ) When the phone is in standby, press and hold [cid/menu]. The following screen appears.
2) Press [vol/ / ] to move the pointer to select DIAL.
ꢁ) Press [select] to set the phone to pulse dialing.
4) Press [end] or return the handset to the base unit to complete the setting. The handset
returns to standby.
Note: If your phone system requires pulse dialing and you need to send the DTMF tones during a
call, you can temporarily switch over to tone dialing. (Refer to "Tone Dialing Switch-over" on page
27.)
ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Language
You can change the language the handset menu displays. Choose from English, French, or Spanish.
To change the language setting:
ꢀ) When the phone is in standby, Press and hold [cid/menu]. The following screen appears.
2) Press [vol/ / ] to move the pointer to select LANGUAGE.
ꢁ) Press [select] to select ENG, FR. or ESP.
4) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby.
ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Speed Dial Memory
Your cordless phone allows you to store up to ꢀ0 names and numbers in the handset. You can dial these numbers
with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number
(up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example
is a frequently refilled prescription number. Store your pharmacy phone number in one speed dial and your most
frequently refilled prescription number as another speed dial. To use, once you ring your pharmacy's automated
prescription line, simply press [memory] and the speed dial number where you stored your prescription number and
press [select].
Note: When editing the speed dial memory, you must press a key within 30 seconds or the phone
will return to standby. If you return the handset to the base, the phone will return to standby also.
Storing a Name and Number in Memory
ꢀ) With the phone in standby, press [memory].
2) Enter [0] - [9] or use [vol/ / ] and [vol/ / ] to select the speed dial location where you
would like to store this entry, and then press [select] twice.
3) STORE NAME appears and a cursor flashes indicating that the phone is ready for the
name to be entered.
Note: If the selected speed dial number is already assigned, the Edit screen
appears. You can select EDIT MEMORY to edit this entry, select DELETE
MEMORY to erase this entry, or select GO BACK to choose another speed dial
number.
ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
4) Enter a name according to the instructions below, then press [select]. If no name is required, go to step 5.
• The name can be up to ꢀꢁ characters.
• Use [ /tone/ ] and [#/ ] to move the cursor to the desired location.
• Press [delete/channel] to delete characters as needed or press and hold to delete all characters.
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order: upper case letters first,
lower case letters next and finally the number corresponding to the key.
Note: If the next character uses the same number key, you must press [#/ ] to move the cursor over.
Otherwise the next time you press the number key, it changes the character that was previously set.
For example, to enter Movies.
ꢀ) Press [6] once. Then press [#/ ] to
move the cursor to the right.
2) Press [6] six times.
Number of times key is pressed
keys
1
2
3
4
5
6
7
8
9
1
2abc
3def
ꢁ) Press [8] six times.
4ghi
5jkl
4) Press [4] six times.
5) Press [3] five times.
6) Press [7] eight times.
6mno
7pqrs
8tuv
9wxyz
0oper
20
Download from Www.Somanuals.com. All Manuals Search And Download.
If you make a mistake while entering a name
Use [ /tone/ ] or [#/ ] to move the cursor to the incorrect character.
Press [delete/channel] to erase the wrong character. Then enter the correct character. To delete all characters,
press and hold [delete/channel].
5) STORE NUMBER is displayed. The cursor flashes indicating that the phone is ready for
the number to be entered.
6) Use the keypad to enter the phone number; each number can be up to 20 digits. If you
need the phone to pause during the dialing sequence, press [redial/pause] to insert a
two-second delay between the numbers. You can enter multiple pauses to increase the
delay. Each pause counts as a digit. The display shows a P for every pause.
7) Press [memory]. You will hear a confirmation tone, and the following screen appears.
Memory storage is complete.
8) After about 2 seconds, the following screen displays all the speed dial memory entries.
9) Press [end] to exit memory setup mode. The phone returns to standby.
Note: When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more
than 30 seconds, it will beep rapidly, and the phone will return to standby.
2ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Caller ID in Speed Dial Memory
Caller ID names and numbers shown in the Caller ID list can be stored in speed dial memory.
To store a caller id name/number to memory:
ꢀ) With the phone in standby, press [cid/menu]. Select the phone number to be stored from
the Caller ID list by pressing [vol/ / ] or [vol/ / ].
2) Press [memory].
ꢁ) Enter a number ( [0] – [9] ) or press [vol/ / ] or [vol/ / ] to select the memory location
to be stored.
4) Press [select]. You hear a confirmation tone, and the number is stored in memory. The
display returns to the Caller ID list.
Note:
• If a number has already been stored in the selected memory number
location, a confirmation screen is displayed. To overwrite, press [vol/ / ] to
YES and press [select]. The display returns to the Caller ID list.
• You cannot store a Caller ID message if no phone number appears in the message.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone
Making and Receiving Calls
Handset on the base
Handset off the base
ꢀ) Press [talk/flash].
ꢀ) Pick up the handset from the base.
2) Press [talk/flash].
ꢁ) Listen for the dial tone.
4) Dial the number.
2) Listen for the dial tone.
ꢁ) Dial the number.
Making a call
OR
OR
ꢀ) Pick up the handset from the base.
2) Dial the number. Then press [talk/flash].
Dial the number. Then press [talk/flash].
ꢀ) Pick up the handset from the base. (If
AutoTalk is on, the phone will answer the
call when you pick it up.)
Press [talk/flash] (or [ /tone/ ], [#/ ] or any
number key if AutoTalk is on).
Receiving a call
Hanging up
2) Press [talk/flash].
Press [end] or return the handset to the base.
Making a Call from Speed Dial Memory
To make a call from speed dial memory:
ꢀ) With the phone in standby, press [memory]. The handset displays your programmed
speed dial number.
2ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Enter the number ( [0] – [9] ), or press [vol/ / ] or [vol/ / ] to select the speed dial number you would like to
dial.
ꢁ) Press [talk/flash]. TALK and the volume setting and the number selected appear on the
display. Then the displayed number is dialed.
Note: You can also press [talk/flash] before you access the speed dial memory.
When you come to the phone number you want to dial, press [select].
To cancel speed dialing
Press [end] to return to standby. If accessing the list during an active call, you can press [memory] to exit the list
immediately. If no key is pressed for ꢁ0 seconds, the handset will exit the speed dial list automatically.
Note: Pressing [end] to exit the speed dial list during a call will disconnect the call immediately.
Making a Call from the Caller ID List
You can place a call directly from the Caller ID list.
ꢀ) Press [cid/menu] in standby. Use [vol/ / ] or [vol/ / ] to select the phone number that
you want to dial.
2) To have the phone dial a "ꢀ" before the displayed Caller ID number, press [1]. To have the
phone dial the stored area code before the displayed Caller ID number, press [3].
ꢁ) Press [talk/flash]. The displayed phone number dials automatically.
Note:
• You can also press [talk/flash] before you access the Caller ID list. When you come to the phone
number you want to dial, press [select].
• You cannot make a call from the Caller ID list if your cordless telephone is connected to a private
branch exchange (PBX).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Redialing the Last Dialed Number
ꢀ) Remove the handset from the base.
2) Press [talk/flash].
ꢀ) Remove the handset from the base.
2) Press [redial/pause].
ꢁ) Press [talk/flash].
OR
ꢁ) Listen for the dial tone.
4) Press [redial/pause].
Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from.
To select the ringer:
ꢀ) With the phone in standby, press [vol/ / ] or [vol/ / ].
2) The phone will sound the different ring tones at different volumes. To turn the ringer
off, select RINGER OFF.
ꢁ) When the phone sounds the ring tone and volume you wish to use, press [end].
Temporarily Mute Ringer
If the handset is off the base while an incoming call is ringing, simply press [end] to mute
the incoming ring. The ringer will sound with the next incoming call.
Note: You can only mute the handset ringer if the handset is off the base when the phone starts
ringing.
Adjusting the Earpiece Volume
To change the earpiece volume, press [vol/ / ] or [vol/ / ] during a call.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Call Waiting
If you subscribe to Call Waiting through your local telephone company, you can receive calls while on the line.
To answer a call waiting call:
ꢀ) While on the phone, you will hear a call waiting tone. (If you have CIDCW service
more information)
2) Press [talk/flash] to accept the waiting call. After a short pause, you will hear the new
caller.
ꢁ) To return to the original caller, press [talk/flash] again.
Selecting a Different Channel
Your phone incorporates UltraClear Plus™ true compander circuitry which virtually
eliminates background noise. This innovative technology, together with 20 different
channels, provides you with the best possible reception during all your conversations. If
you happen to encounter interference while using your phone, you can manually change
the phone’s channel for clear operation. To change the channel during a call, press
[delete/channel]. SCANNING appears on the display, indicating the phone is changing
to another channel. For more information on interference, refer to "Radio Interference" on
Find Handset
To locate a lost handset, press [find] on the base. The handset will beep for 60 seconds.
The beeping will stop when any handset key is pressed, when the handset is returned
to the base, or when [find] is pressed. The handset will also stop beeping automatically
when an incoming call is received.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone Dialing Switch-over
If your telephone company requires pulse dialing, you can temporarily switch over to tone
dialing after the call connects. This feature is useful when you need tone dialing to use
automated such as telephone bank tellers, telephone prescription refills, customer support
menus, etc.
If your phone is set to pulse dialing mode, make your call normally. Once your call
connects, press [ /tone/ ]. Any digits you enter from then on will be sent as tone dialing.
When this particular call ends, the phone automatically returns to pulse dialing mode.
Voice Mail Waiting Indicator
If you subscribe to voice mail service through your local telephone company, you can use your cordless telephone to
access your voice mailbox. The voice mail company will provide you with the access number.
The in use/ LED on the base of your phone flashes whenever you have messages waiting in your voice mailbox.
To access your voice mailbox
Just dial the access number supplied by your voice mail provider to enter your mailbox.
You can program your voice mail access number to a speed dial number.
If the voice mail waiting indicator remains on after you have retrieved your messages, press and hold [find] for 5
seconds. This will reset the indicator.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID and CIDCW (Caller ID on Call Waiting)
You must subscribe to Caller ID services through your local telephone provider to use these features.
When the telephone rings, the Caller ID feature allows you to view the caller’s name, phone number, date and time
of call. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the caller’s
name, the caller’s name appears on the display (up to ꢀ5 letters).
The date and
time received
Caller's name
Caller's phone number
You may receive any one of the following messages:
When invalid data is received
INCOMPLETE DATA
PRIVATE NAME
PRIVATE NUMBER
UNKNOWN NAME
When a private name is received
When a private number is received
When an unknown name is received
When an unknown number is received UNKNOWN NUMBER
Note:
• Data errors appear as " ".
• If you answer a call before the Caller ID message is received (for example, before the second ring),
the Caller ID message will not appear.
• When the call is received via a telephone company that does not offer Caller ID service, the caller’s
phone number and name do not appear. (This includes international calls.)
• When the call is received via a private branch exchange (PBX), the caller’s phone number and
name may not appear.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID on Call Waiting (CIDCW)
If you subscribe to CIDCW offered by your telephone company, you will hear a Call Waiting tone while you are on a
call, and the Caller ID data will be displayed at the handset. To accept the waiting call, press [talk/flash] (see page
26).
Viewing the Caller ID Message List
The Caller ID list stores information for up to ꢁ0 incoming calls - even unanswered calls. You can also view the Caller
ID list during a call.
ꢀ) Press [cid/menu]. The summary screen displays the number of new messages and total
messages.
2) Use [vol/ / ] to scroll through the messages from the latest to the earliest, or use [vol/
/ ] to scroll through the messages from the earliest to the latest.
ꢁ) Press [cid/menu] to return to the call, or press [end] to return to standby.
Note:
• In Caller ID operation, if no key is pressed for more than 30 seconds, an error tone sounds and the
handset returns to standby.
• Each message can be up to 15 characters for the name and 15 digits for the phone number.
• The number of calls from the same Caller ID appears next to the received time. Once you view the
new message, the number will be cleared and disappear.
• During a call, don't press [end], or the call will be disconnected.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Information from the Caller ID List
If the phone receives more Caller ID messages than it can store, the oldest one in the list is automatically deleted.
Caller ID data can also be deleted manually.
Deleting a Caller ID message
ꢀ) Press [cid/menu] in standby. Find the message to be deleted from the Caller ID list by
pressing [vol/ / ] or [vol/ / ].
2) Press [delete/channel].
ꢁ) Press [vol/ / ] or [vol/ / ] to select YES, and then press [select].
Deleting all Caller ID names/numbers
ꢀ) With the phone in standby, press [cid/menu].
2) Press [delete/channel].
ꢁ) Press [vol/ / ] or [vol/ / ] to select YES, and then press [select].
You hear a confirmation tone and all stored Caller ID messages are deleted.
Note:
• While using the DELETE ALL? or DELETE MESSAGE? screen, if no key is pressed for more than
30 seconds, an error tone sounds, and the handset returns to standby.
• If you get an incoming call or page, the deleting operation is canceled and you can answer the call
or page.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by other equipment, the
cordless phone provides AutoSecure™ (which electronically locks your phone when the handset is in the base)
and Random Code™ digital security which automatically selects one of over 262,000 digital security codes for the
handset and the base. If the handset battery pack is completely discharged or the battery pack is removed, the
digital security code will be lost. If this happens, a new security code is set automatically the next time the battery
pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code,
you can change the code.
ꢀ) Remove the handset from the base unit. Press and hold [find] on the base.
2) While holding [find], place the handset in the base, and leave the handset in the base for more than ꢁ seconds.
A new random security code is set.
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Specifications
The phone complies with FCC Parts ꢀ5 and 68.
Operating temperature
AC Adapter
-ꢀ0°C to +50°C (+ꢀ4°F to +ꢀ22°F)
Part number
Input Voltage
Output Voltage
Part number
Capacity
AD-000ꢀ
ꢀ20V AC 60Hz
9V DC 2ꢀ0mA
BT-ꢀ006
Battery
500mAh, ꢁ.6V
924.5ꢀ6925 - 926.704425 MHz
2,405.ꢀ55942 - 2,4ꢀꢀ.7ꢀ844ꢀ MHz
Frequency
Note: To avoid damage to the phone use only Uniden AD-0001 and BT-1006 with your phone.
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
Power Failure
During the period that the power is off, you will not be able to make or receive calls with the telephone.
ꢁ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Talk and Standby Times
With average use, your handset battery provides approximately 6 hours of talk time and approximately 7 days
of standby time. When your handset is not being used and is left off of the base unit, the battery will gradually
discharge. You can achieve optimum battery life and performance by returning the handset to the base unit after
each use. If the handset is left off of the base unit, the actual talk time duration will be reduced respective to the
amount of time the handset is off of the base unit.
Low battery alert
When the battery pack is very low and needs to be charged, the phone is programmed to
eliminate functions in order to save power. If the phone is not in use, LOW BATTERY appears
on the LCD and none of the keys will operate. During a call, LOW BATTERY flashes and
the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for
charging.
Note: Information stored in the phone's memory will be retained for 30 minutes after the battery pack
is removed. This includes all setup information, last number dialed, speed dial memory, and the CID
list.
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum
performance, be sure to return the handset to the base unit after a telephone call.
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery replacement and handling
Recharge your phone on a regular basis by returning the handset to the base after each phone call. When the
operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your
battery should last about one year. To order replacement batteries, please contact Uniden’s Parts Department. The
Warning:
Caution
To avoid the risk of personal injury or
property damage from fire or electrical
shock, only use the Uniden battery
model and Uniden adapter model
specifically designated for this product.
• Use only the specified Uniden battery pack (BT-1006).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Cleaning the battery charging contacts
To maintain a good charge, clean the charging contacts on the handset once
a month. Dampen a cloth with plain water. Gently rub the damp cloth over the
charging contacts until all visible dirt is removed. Dry the contacts thoroughly
before returning the handset to the base.
Caution
Do not use paint thinner, alcohol, or other chemical products. Doing so
may discolor the surface of the telephone and damage the finish.
ꢁ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range
limits of the base, your call will terminate within one minute.
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
Symptom
Suggestion
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset are clean.
The in use/ LED won't
illuminate when the handset is
placed in the base.
• Move the handset and/or base away from metal objects or appliances and try
again.
• Press [delete/channel] during a call to help eliminate background noise.
• Make sure that the handset is not too far from the base.
The audio sounds weak and/
or scratchy.
• Check both ends of telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
Can’t make or receive calls.
• Make sure that the handset is not too far from the base.
• Check the dialing mode used by your telephone company.
ꢁ5
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
• The battery pack may be weak. Charge the battery for ꢀ5-20 hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
The handset doesn’t ring or
receive a page.
• Check the battery pack to ensure there is a secure connection.
• Make sure ringer volume isn’t set to "off."
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent
lights, and electrical appliances.
Severe noise interference.
• Move the base to another location or turn off the source of interference.
• The call was answered before the second ring.
• The call was placed through a switchboard.
• Charge the handset.
• Your Caller ID service may not be active; contact your local telephone service
provider.
The Caller ID does not
display.
• Contact your local telephone company to make sure that your telephone receives
FSK message signaling.
• Reset the indicator by pressing and holding [find] for 5 seconds.
Voice Message Indication
does not work.
ꢁ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Liquid Damage
Moisture and liquid can damage your cordless phone.
• If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the
liquid, and use as normal.
• If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the
handset battery compartment or vent openings on the base), follow the steps below:
Handset
Base
ꢀ) Remove the battery cover and leave it off for ventilation.
2) Disconnect the battery pack. Leave the battery cover off
and the battery pack disconnected for at least ꢁ days.
ꢁ) Once the handset is completely dry, reconnect the
battery pack and the battery cover.
ꢀ) Disconnect the AC adapter from the base,
cutting off electrical power.
2) Disconnect the telephone cord from the base.
ꢁ) Let dry for at least ꢁ days.
4) Recharge the handset's battery pack for ꢀ5 to 20 hours
before using.
IMPORTANT:
You must unplug the telephone line while recharging the battery pack to avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset,
base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our
ꢁ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Precautions!
Before you read anything else, please note the following:
Disposed of Properly
Warning!
• Uniden voluntarily participates in an RBRC®
industry program to collect and recycle nickel-
cadmium batteries at the end of their useful life, when taken
out of service within the United States.
Uniden America Corporation DOES NOT represent this unit
to be waterproof. To reduce the risk of fire, electrical shock,
or damage to the unit, DO NOT expose this unit to rain or
moisture.
• The RBRC® program provides a convenient alternative to
placing used nickel-cadmium batteries into the trash or
municipal waste stream, which is illegal in some areas.
• Through the RBRC® program, Uniden makes it easy for you
to drop off the used battery at local retailers of replacement
nickel-cadmium batteries. You may also contact your local
recycling center for information on where to return the used
battery.
Rechargeable Nickel-Cadmium Battery Warning
• This equipment contains a rechargeable nickel-cadmium
battery.
• Cadmium is a chemical known to the State of California to
cause cancer.
• The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable nickel-cadmium battery used
in this equipment in any charger other than the one designed
to charge this battery as specified in the owner's manual.
Using another charger may damage the battery or cause the
battery to explode.
Please call ꢀ-800-8-BATTERY for information on Ni-Cd battery
recycling in your area. Uniden’s involvement in this program
is part of its commitment to protecting our environment and
conserving natural resources.
• RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
Uniden works to reduce lead content in our PVC coated cords
in our products and accessories.
Warning!
The cords on this product and/or accessories contain lead, a
chemical known to the State of California to cause birth defects
or other reproductive harm. Wash hands after handling.
ꢁ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the following:
ꢀ. Do not use this product near water, for example, near a
bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA.
On the bottom of this equipment is a label that contains,
among other information, a product identifier in the format US:
AAAEQ##TXXXX. If requested, this number must be provided
to the telephone company.
2. Avoid using a telephone (other than a cordless type) during
an electrical storm. There may be a remote risk of electric
shock from lightning.
ꢁ. Do not use the telephone to report a gas leak in the vicinity
of the leak.
4. Use only the power cord and batteries indicated in this
manual. Do not dispose of batteries in a fire. They may
explode. Check with local authorities for possible battery
disposal instructions.
An applicable Universal Service Order Codes (USOC)
certification for the jacks used in this equipment is provided (i.e.,
RJꢀꢀC) in the packaging with each piece of approved terminal
equipment. A plug and jack used to connect this equipment to
the premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted by
the ACTA.
A compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions
for details.
The REN is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by
the total RENs, contact the telephone provider. For products
approved after July 2ꢁ, 200ꢀ, the REN for this product is part of
the product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal
point (e.g., 0ꢁ is a REN of 0.ꢁ). For earlier products, the REN is
separately shown on the label.
5. Do not disassemble any component of this product.
SAVE THESE INSTRUCTIONS
CAUTION!
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions. Do not
open or mutilate the battery, and disconnect the battery before
shipping this product.
ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance
notice isn't practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of
your right to file a complaint with the FCC if you believe it is
necessary. The telephone company may make changes in its
facilities, equipment, operations or procedures that could affect
the operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
Please follow instructions for repairing, if any (e.g. battery
replacement section); otherwise do not substitute or repair
any parts of the device except as specified in this manual.
Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information. This
equipment is hearing aid compatible.
authority to operate this product.
This device complies with part ꢀ5 of the FCC rules. Operation
is subject to the following two conditions: (ꢀ) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation. Privacy of communications may not be
ensured when using this phone.
To insure the safety of users, the FCC has established
criteria for the amount of radio frequency energy various
products may produce depending on their intended usage.
This product has been tested and found to comply with the
FCC's exposure criteria. For body worn operation, the FCC RF
exposure guidelines were also met when used with the Uniden
accessories supplied or designed for this product. Use of other
accessories may not ensure compliance with FCC RF exposure
guidelines and should be avoided.
Should you experience trouble with this equipment, please
contact Uniden customer service at 800-297-ꢀ02ꢁ. If the
equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the
equipment until the problem is resolved.
NOTICE: According to telephone company reports, AC electrical
surges, typically resulting from lightning strikes, are very
destructive to telephone equipment connected to AC power
sources. To minimize damage from these types of surges, a
surge arrestor is recommended.
Radio Interference
Radio interference may occasionally cause buzzing and
humming in your cordless handset, or caused by external
sources such as TV, refrigerator, vacuum cleaner, fluorescent
lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check
around your home to see what appliances may be causing
the problem. In addition, we recommend that the base not
be plugged into a circuit that also powers a major appliance
because of the potential for interference. Be certain that
the antenna on the unit is fully extended when needed. In
the unlikely event that you consistently hear other voices or
Changes or modifications to this product not expressly
approved by Uniden, or operation of this product in any way
other than as detailed by the owner's manual, could void your
40
Download from Www.Somanuals.com. All Manuals Search And Download.
distracting transmissions on your phone, you may be receiving
radio signals from another cordless telephone or other source
of interference. If you cannot eliminate this type of interference,
you need to change to a different channel. Finally, it should be
noted that some cordless telephones operate at frequencies
that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR.
If interference is experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate
the interference.
I.C. Notice
Terminal Equipment
NOTICE: This equipment meets the applicable Industry Canada
Terminal Equipment Technical Specifications. This is confirmed
by the registration number. The abbreviation, IC, before the
registration number signifies that registration was performed
based on a Declaration of Conformity indicating that Industry
Canada technical specifications were met. It does not imply that
Industry Canada approved the equipment
NOTICE: The Ringer Equivalence Number (REN) for this
terminal equipment is marked on the equipment itself. The REN
assigned to each terminal equipment provides an indication
of the maximum number of terminals allowed to be connected
to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed five.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications
between the handset and base of your cordless telephone
are accomplished by means of radio waves which are
broadcast over the open airways. Because of the inherent
physical properties of radio waves, your communications can
be received by radio receiving devices other than your own
cordless telephone unit. Consequently, any communications
using your cordless telephone may not be private.
Radio Equipment
The term "IC:" before the radio certification number only
signifies that Industry Canada technical specifications were
met. Operation is subject to the following two conditions: (ꢀ) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device. "Privacy of communications
may not be ensured when using this telephone".
4ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow this exclusion or limitation of incidental or
consequential damages so the above limitation or exclusion
may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal
rights, and you may also have other rights which vary from
state to state. This warranty is void outside the United States
of America and Canada. PROCEDURE FOR OBTAINING
PERFORMANCE OF WARRANTY: If, after following the
instructions in the owner's manual you are certain that the
Product is defective, pack the Product carefully (preferably in
its original packaging). Disconnect the battery from the Product
and separately secure the battery in its own separate packaging
within the shipping carton. The Product should include all parts
and accessories originally packaged with the Product. Include
evidence of original purchase and a note describing the defect
that has caused you to return it. The Product should be shipped
freight prepaid, by traceable means, to warrantor at:
Uniden America Service
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty
service. WARRANTOR: UNIDEN AMERICA CORPORATION
("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for
one year, to the original retail owner, this Uniden Product to be
free from defects in materials and craftsmanship with only the
limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user
shall terminate and be of no further effect ꢀ2 months after the
date of original retail sale. The warranty is invalid if the Product
is (A) damaged or not maintained as reasonable or necessary,
(B) modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C)
improperly installed, (D) serviced or repaired by someone
other than an authorized Uniden service center for a defect
or malfunction covered by this warranty, (E) used in any
conjunction with equipment or parts or as part of any system
not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the owner's manual for this
product.
STATEMENT OF REMEDY: In the event that the product does
not conform to this warranty at any time while this warranty is
in effect, warrantor will either, at its option, repair or replace
the defective unit and return it to you without charge for parts,
service, or any other cost (except shipping at its option, may
replace the unit with a new or refurbished unit. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN
LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF
ANY NATURE WHATSOEVER, WHETHER EXPRESS,
4700 Amon Carter Blvd.
Fort Worth, TX 76ꢀ55
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
D
S
AC adapter information.................. ꢁ2 Dial mode ...................................... ꢀ7 Speed dial memory
Digital security code ...................... ꢁꢀ
Making calls from speed dial
memory...................................... 2ꢁ
Storing names and numbers in
B
Battery pack
E, F, G, H, I, J, K, L
Earpiece volume............................ 25
T, U
Traveling out-of-range ................... ꢁ5
C
M, N, O, P, Q
Deleting ..................................... ꢁ0 Precautions.................................... ꢁ8
Making a call.............................. 24
V, W, X, Y, Z
Voice mail waiting indicator ........... 27
Call waiting .................................... 26
Charging the battery pack ............. ꢀꢀ
R
Receiving a call ............................. 2ꢁ
Redial ............................................ 25
Ringer tone and volume ................ 25
4ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
45
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we’ll take care of you!
Thank you for purchasing a Uniden product. If you have any questions or problems,
please do not return this product to the place of purchase.
call our Customer Hotline at 1-800-297-1023 during regular business hours. *
Having Trouble?
To order headsets, additional handsets, replacement batteries or other accessories, visit our
Need a Part?
Help for our
Special Needs
Customers
If you need special assistance due to a disability or have questions on the accessibility
features of this product, please call 1-800-874-9314 (voice or TTY).
May be covered under one or more of the following U.S. patents:
4,797,9ꢀ6 5,426,690 5,4ꢁ4,905 5,49ꢀ,745 5,49ꢁ,605 5,5ꢁꢁ,0ꢀ0
5,574,727 5,58ꢀ,598 5,650,790 5,660,269 5,66ꢀ,780 5,66ꢁ,98ꢀ
5,67ꢀ,248 5,696,47ꢀ 5,7ꢀ7,ꢁꢀ2 5,7ꢁ2,ꢁ55 5,754,407 5,758,289
5,768,ꢁ45 5,787,ꢁ56 5,794,ꢀ52 5,80ꢀ,466 5,825,ꢀ6ꢀ 5,864,6ꢀ9
5,89ꢁ,0ꢁ4 5,9ꢀ2,968 5,9ꢀ5,227 5,929,598 5,9ꢁ0,720 5,960,ꢁ58
5,987,ꢁꢁ0 6,044,28ꢀ 6,070,082 6,ꢀ25,277 6,25ꢁ,088 6,ꢁꢀ4,278
6,4ꢀ8,209 6,6ꢀ8,0ꢀ5 6,67ꢀ,ꢁꢀ5 6,7ꢀ4,6ꢁ0 6,782,098 6,788,920
6,788,95ꢁ 6,8ꢁ9,550 6,889,ꢀ84 6,90ꢀ,27ꢀ 6,907,094 6,9ꢀ4,940
6,95ꢁ,ꢀꢀ8 7,02ꢁ,ꢀ76
Other patents pending.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|