Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
RocketDial
Welcome/Features
2
4
5
RocketDial
31
31
31
32
Quick Reference Guide
Controls and Functions
Storing and Editing the RocketDial
Making Calls with the RocketDial
Deleting the RocketDial
Getting Started
Read this First
7
8
Caller ID Features
Checking the Package Contents
Setting up the Phone
Mounting the Base Unit on a Wall
Terminology
Caller ID
33
33
34
9
When the Telephone Rings
Viewing the Caller ID Message List
Deleting Information from the Caller ID List 35
Using the Caller ID List
13
14
15
Setting Menu Options
36
Basics
The Integrated Answering Device
The Integrated Answering Device
Features
Turning the Answering System On/ Off
Setting Up Your Answering System
Using Your Answering System
Making and Receiving Calls
Adjusting the Handset Ringer and
Earpiece Volume
18
38
38
39
39
47
19
20
20
20
21
21
21
Redial
Tone Dialing Switch-over
Traveling Out-of-Range
Selecting a Different Channel
Page
Additional Information
Changing the Digital Security Code
Installing the Beltclip
Headset Installation
Note on Power Sources
Maintenance
53
53
53
54
54
55
58
59
61
62
Flash and Call Waiting
Memory Dialing
Storing Phone Numbers and Names
Steps for Entering Names and
Special Characters
22
Troubleshooting
24
26
27
General Information
Precautions & Warranty
I.C. Notice
Making Calls with Memory Dialing
Chain Dialing
Editing a Stored Name and/ or Phone Number 28
Erasing a Stored Name and Phone Number 30
Index
Remote Operation Card
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of the Uniden EXAI378 series cordless telephone and
answering system. This phone is designed and engineered to exacting standards for
reliability, long life, and outstanding performance.
Note: Some illustrations in this manual may differ from the actual unit for
explanation purpose.
Welcome
Features
The color of your cordless phone may vary.
®
As an ENERGY STAR Partner, Uniden has determined that this product or
®
product models meets the ENERGY STAR guidelines for energy efficiency.
®
ENERGY STAR is a U.S. registered mark.
• 900 MHz Extended Range Technology
• 16 Digit, 3-line Backlit Display
• Integrated Telephone Answering Device (ITAD)
• Voice Prompted Guidance through ITAD Setup Menu
• 10 Number Memory Dialing
• RocketDial
• Caller ID and Call Waiting Caller ID
• 30 Number Caller ID Memory
• 32 Digit Redial
• Flash and Pause
• Pulse/ Tone Dialing
• Page/ Find Handset
• 7 Hour Talk Time/ 14 Day Standby Time
• Handset Earpiece and Ringer Volume Control
• Hearing Aid Compatible
• 20 Channel Autoscan
• English or French Display Option
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 2 ]
TM
TM
The EXAI378 series features include AutoTalk and AutoStandby . AutoTalk allows you to answer a call
by just removing the handset from the base so you don't have to waste time pushing buttons.
AutoStandby allows you to hang up by simply returning the handset to the base.
TM
The UltraClear Plus true compander circuitry virtually eliminates background noise. This innovative
technology, together with 20 different channels, provides you with the best possible reception during
all your conversations.
To protect you against misbilled calls which might result from your phone being activated by other
TM
equipment, the EXAI378 series has Random Code digital security which automatically selects one of
TM
over 262,000 digital security codes for the handset and base. Also, the AutoSecure feature
electronically locks your phone when the handset is in the base.
TM
RocketDial is a one touch speed dial key that automatically dials your most important or frequently
called number. The number dialed, is a preset number stored by the user.
Be sure t o visit our web sit e: www.uniden.com
Uniden® is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, AutoSecure, and RocketDial are trademarks of Uniden America Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 3 ]
Step 1 Charging the Battery
Step 2 Connecting
Step 3 Setting Up the Caller ID/Language
Step 4 Setting Up the Answering System
TO INSTALL THE HANDSET BATTERY
CONNECT TO A PHONE LINE
TURN THE ANSWERING SYSTEM ON
Press answer on/off.
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the
telephone cord into the base unit and then into
a telephone wall jack.
Remove the cover.
1
status
A pre-recorded greeting
will play and your
system is ready to
accept calls.
Connect the
battery pack
connector with
the correct
polarity.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Choose the dial mode” on page 17.
2
TO RECORD A PERSONAL GREETING
Press and hold
Note: Three Caller ID options are available:
AutoTalk, Caller ID on Call Waiting (CIDCW),
and Area Code.
status
greeting until
Replace the cover.
3
you hear “Record
greeting” and a
confirmation
tone.
1
TO CHANGE CALLER ID OPTIONS
Press and hold cid/menu.
1
TO PLUG INTO AC POWER
Record your personal greeting. (Position
Press
an option.
or
to move the pointer to
yourself as near to the base as possible
and speak clearly.)
Plug AC adapter cord into the base unit
and then into a 120V AC outlet.
2
2
3
4
1
Press select to change the option
setting.
When finished press greeting again or
play/stop.
3
Press end and return the handset to
the base.
TO CHOOSE THE LANGUAGE
Press and hold cid/menu.
1
Press
Language.
or
to move the pointer to
Place the handset on the base.
2
2
3
4
Press select to select Eng(English) or
Fr. (French).
Note: You must charge the battery continuously
Press end or return the handset to
the base.
for 15 - 20 hours before using the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 4 ]
QUICK REFERENCE GUIDE
Controls and Functions
1. Handset antenna
2. Beltclip holes
3. Optional headset jack
4. Handset battery compartment
5. Handset earpiece
6. LCD display
1
5
7. Caller ID (cid)/ menu key
8. Talk/ flash key
2
9.
/ tone/ left cursor ( ) key
*
6
7
10. Redial/ pause (p) key
11. Select key
13
14
15
16
3
12. Handset microphone and
ringer speaker
8
13. Volume up ( ) key
14. RocketDial key
4
15. End key
9
17
16. Volume down ( ) key
17. #/ right cursor ( ) key
18. Memory (mem) key
19. Delete/ channel (ch) key
20. Handset charging contacts
10
18
11
19
12
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
[ 5 ]
21 22
21. Telephone line jack
22. DC IN 9V jack
23. Handset retainer clip
24. Set/ ringer key
25. Delete key
26. Repeat/ rewind (rew) key
27. Find hs key
28. Memo key
29. Base charging contacts
30. Base speaker
30
31. Speaker volume keys
32. Menu key
31
32
33
34
35
36
37
38
23
24
33. Status LED
40
34. Message counter display
35. Play/ stop key
25
26
36. Skip/ fast forward (ff) key
37. Answer on/ off key
38. Greeting key
27
28
39. Microphone
40. Base antenna
39
29
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 6 ]
CONTROLS AND FUNCTIONS
Read this First
This cordless telephone must be set up before use. Follow these steps:
St ep 1 ( page 8)
Unpack the telephone and accessories.
St ep 2 ( page 9)
Next, choose the best location
to set up the base unit.
About the digital security code
This cordless telephone uses a
digital security code to
prevent unauthorized access
to your base unit. This
security code prevents other
cordless handsets from making
calls through your base unit.
A random security code will be
assigned automatically
St ep 3 ( page 10 t o 13)
Then, insert the battery pack into the
handset. Connect the base unit. You
must charge the battery pack for 15-20
hours before plugging int o t elephone
line and using t he phone.
between your base unit and
handset when you charge the
battery pack for the first time.
If you want to change the
security code, see page 53.
St ep 4 ( page 38 t o 46)
Finally, set the answering system.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
[ 7 ]
Checking the Package Contents
Make sure you have received the following items in the package. If any of these
items are missing or damaged, contact the Uniden Parts Department.
• Base unit
• Handset
• AC adapt er
• Rechargeable bat t ery
• Telephone cord
• Belt clip
• This Owner’s Manual
• Ot her Print ed Mat erial
Uniden Parts Department at (800) 554-3988
Hours: M-F 7:00 a.m. to 5:00 p.m. CST. We can also be
reached on the web at www.uniden.com
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 8 ]
GETTING STARTED
Setting up the Phone
Do t he following st eps:
A. Choose the best location
B. Install the battery pack
C. Connect the base unit
A. Choose t he best locat ion
Before choosing a location for your new phone, read the INSTALLATION
CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY
INSTRUCTIONS. Here are some important guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
Avoid television sets and
other electronic
equipment
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration, or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet
which is not switchable.
• Keep the base and handset away from sources of electrical noise such as motors,
microwave ovens, and fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
[ 9 ]
B. Install the battery pack
Charge the battery pack for at least 15-20 hours
before plugging the telephone jack and start using
your phone.
1)Press in on the battery cover release and slide the cover
down until it comes off.
• Use only the Uniden
battery (BT-905)
supplied with your
phone. Replacement
batteries are also
available through the
Uniden Parts
2)Connect the battery pack connector observing correct
polarity (black and red wires) to the jack inside the
battery compartment.
Do not exert any force on this connection. It could cause
damage to the battery or handset. Once you are certain
that you have made a good connection, then insert the
battery pack into the battery compartment. Do not pinch
the wires.
Department (see page
8).
• Recharge your phone
on a regular basis by
returning the handset
to the base after each
phone call.
3)Securely close the battery compartment cover by sliding it
up until it snaps into place.
4)Place the handset on the base.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 10 ] GETTING STARTED
Battery use time ( per charge)
From fully charged (15-20 hours charge time)
• Seven hours continuous use.
• Fourteen days when the handset is in the standby mode.
Low battery alert
When the battery pack is very low and needs to be charged,
the phone is programmed to eliminate functions in order to
save power. If the phone is not in use, “Low Battery”
appears on the LCD and none of the keys will operate.
If the phone is in use, “Low Battery” flashes and the
handset beeps. Complete your conversation as quickly as
possible and return the handset to the base unit for
charging.
The last number dialed in the redial memory and the
numbers stored in the memory locations are retained for
up to 30 minutes while you replace the battery pack.
Cleaning the battery charging contacts
To maint ain a good charge, it is import ant t o clean
t he bat t ery cont act s on t he handset and base unit
wit h a dry clot h or a pencil eraser about once a
mont h. Do not use any liquids or solvent s.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED [ 11 ]
C. Connect the base unit
1)Connect the AC adapter to the DC IN 9V jack
and a standard 120V AC wall outlet.
2)Set the base on a desk or tabletop, and place
the handset on the base unit as shown. (For
wall mounting, see "Mounting the Base Unit on
a Wall", on page 13.)
Place the power cord so
that it does not create
a trip hazard or where
it could become chafed
and create a fire or
electrical hazard.
3)Raise the antenna to a vertical position.
4)Make sure the status LED illuminates. If the
LED does not illuminate, check to see that the
AC adapter is plugged in and the handset
makes good contact with the base charging
contacts.
• Use only t he supplied AD-420 AC adapt er.
Do not use any ot her AC adapt er.
The handset can be
placed face up or
face down in the base
for charging.
• Connect the AC adapter to a continuous
power supply.
• Place the base unit close to the AC outlet so
that you can unplug the AC adapter easily.
• After installing the battery pack in the handset, charge your handset at least
15-20 hours before plugging int o t he phone line. Once the handset battery
pack is fully charged, connect the telephone line cord to the base and
telephone wall outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 12 ] GETTING STARTED
5)Connect the telephone line cord to the TEL
LINE jack and a telephone outlet once the
handset is fully charged.
If your telephone outlet isn't
modular, contact your telephone
company for assistance.
Modular
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1)Plug the the AC adapter to the DC IN 9V jack.
2)Wrap the AC adapter cord inside the molded wiring
channel as shown.
DO NOT use an AC
outlet controlled by a
wall switch.
3)Plug the AC adapter into a standard 120V AC wall outlet.
4)Plug the telephone line cord into the TEL LINE jack.
Wrap the cord inside the molded wiring channel
as shown.
5)Plug the telephone line cord into the telephone outlet.
6)Raise the antenna to a vertical position.
7)Align the mounting slots on the base with the mounting
posts on the wall. Then push in and down until the
phone is firmly seated.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED [ 13 ]
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid
excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the base
and handset.
• Use #10 screws (minimum length of 1-3/ 8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1)Insert two mounting screws into the wall, (with their
appropriate anchoring device), 3-15/ 16 inches apart. Allow
about 1/ 8 of an inch between the wall and screw heads for
mounting the phone.
2)Refer to steps 1 through 7 on page 13 to mount the telephone.
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is
the terminology explanation.
• St andby Mode - The handset is not in use, off the base, and talk/flash has not
been pressed. A dial tone is not present.
• Talk Mode - The handset is off the base and talk/flash has been pressed
enabling a dial tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 14 ] GETTING STARTED
Setting Menu Options
There are five setup options available. They are Caller ID options [AutoTalk,
CIDCW (Caller ID on Call Waiting), and Area Code], Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the talk/flash button.
If the phone rings when AutoTalk is on, simply remove the handset from the base
and the phone automatically answers the call. If the phone rings when AutoTalk
is off, you must press talk/flash to answer the call.
Caller ID options
To change your AutoTalk and CIDCW:
1)Press and hold cid/menu. The following screen appears.
2)Use
or , or a number key (1 and 2) to move the
pointer to the selection that you would like to change.
Press select to toggle between “On” and “Off”.
3)Press end and return the handset to the base unit to complete the setting. The
handset returns to the standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED [ 15 ]
To enter your Area Code
If you enter a 3-digit area code number in the Area Code option, your local
area code does not appear in Caller ID messages. Do not program this option, if
your calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local seven digit
number. For calls received from outside your local area code, you will see a full
10-digit number.
If your calling area
requires 10-digit
dialing, do not program
this option.
1)When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2)Press 3 or press
twice to select “Area Code”.
3)Press select.
/
,
4)Use the number keys (0 to 9), #/
,
/ tone
or
*
delete/ch to enter the 3-digit area code.
5)Press select. A confirmation tone sounds and the displayed area code is entered.
6)Press end or return the handset to the base unit to complete the setting. The
handset returns to the standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use the
delete/ch and number keys to enter the new area code.
Then press select. A confirmation tone sounds.
To complete the setting, press end or return the handset
to the base unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 16 ]
Choosing the dial mode
Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However, some phone systems still use pulse dialing such as in rural areas.
The default setting is tone dialing. Depending on your dialing system, set the
mode as follows:
• If you are not sure
of your dialing
system, make a trial
call. If the call
1)When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2)Press 4 or press
three times to select “Dial”.
connects, leave the
setting as is,
otherwise set for
pulse dialing.
3)Press select to toggle between “Tone” and “Pulse”.
• If your phone system
requires pulse
4)Press end or return the handset to the base unit to complete the setting. The
handset returns to the standby mode.
dialing and you need
to send the DTMF
tones for certain
situations during a
call, you may
Setting the language
1)When the phone is in the standby mode, Press and hold
“switch-over” to
tone dialing (refer to
“Tone Dialing
Switch-over” on
page 20).
cid/menu. The following screen appears.
2)Press 5 or press
four times to select “Language”.
3)Press select to toggle between “Eng” and “Fr.”.
4)Press end or return the handset to the base unit to complete the setting. The
handset returns to the standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED [ 17 ]
Making and Receiving Calls
Handset On Base
Handset Off Base
Pick up the handset (AutoTalk),
To answer
Press talk/flash, any number,
or pick up the handset and press
/tone/ or #/
.
a call
*
talk/flash.
1)Pick up the handset.
2)Press talk/flash.
1)Press talk/flash.
2)Listen for the dial tone.
3)Dial the number.
Refer to page 15
"Setting menu options"
to turn on the AutoTalk
feature if desired.
3)Listen for the dial tone.
4)Dial the number.
To make
a call
OR
OR
1)Pick up the handset.
2)Dial the number, then press
talk/flash.
Dial the number, then press
talk/flash.
Press end or return the handset to the base (AutoStandby).
To hang up
1)Pick up the handset.
2)Press talk/flash.
3)Listen for the dial tone.
4)Press redial/p.
1)Press talk/flash.
2)Listen for the dial tone.
3)Press redial/p.
To redial
OR
OR
1)Pick up the handset.
2)Press redial/p,then press
talk/flash.
Press redial/p, then press
talk/flash.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 18 ] BASICS
Adjusting the Handset Ringer and Earpiece Volume
Ring Type A
Handset ringer tone and volume
High
Press
or
in standby mode to select one of five ringer tones
and volume combinations.
Ring Type A
Low
Earpiece volume
Ring Type B
High
Pressing
or
during a call will change the earpiece volume of
the handset. This setting will remain in effect after the
telephone call has ended.
Ring Type B
Low
Ringer Off
When you press
tone sounds.
in Maximum mode or
in Low mode, an error
Ringer Mute
You can temporarily mute the handset ringer tone. (The base unit will continue to
ring.) When the handset is off the base and the phone is ringing, press end. The
ringer tone will return to normal starting with the next incoming call.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASICS [ 19 ]
Redial
The redial/p key redials the last number dialed. The redialed number can be up to
32 digits long.
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse
dialing (sometimes referred to as rotary dialing). If you need
to enter tone dialing digits, you can switch-over to tone
dialing during the call. For example, entering your bank
account number after you have called your bank.
• The tone feature
only applies when
the dial mode is set
to pulse.
• This special number
can be stored in a
memory location.
This is referred to as
Chain Dialing (See
page 27.)
Initially make your call with the pulse dialing mode. Once your call connects, press
/ tone/ . Enter the desired number. These digits will be sent as tone dialing.
Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
*
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit,
noise increases. If you pass the range limits of the base unit, your call will
terminate within 5 minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 20 ] BASICS
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the
phone´s channel for clear operation. This function works only when the phone is
in use.
Press delete/ch. “Scanning” appears on the display, indicating the phone is
changing to another channel. For more information on interference, refer to
"Precautions" on page 59.
Page
To locate the handset (while it's off the base), press
find hs on the base. The handset beeps for 60 seconds.
Paging is canceled when pressing any handset key, find hs
on the base or the handset is returned to the base.
Paging is also canceled
when the phone receive
a incoming call.
Flash and Call Waiting
If you have "Call Waiting" service and a call waiting tone
sounds while you are on a call, press talk/flash to accept
the waiting call. There is a short pause, then you will hear
the new caller. To return to the original caller, press
talk/flash again.
You must subscribe through your local telephone company to
receive Call Waiting Service.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASICS [ 21 ]
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your
EXAI378 series stores up to 10 names/ numbers in the handset.
In memory dialing
operation, you must
press a key within 30
seconds. Otherwise, an
error tone will sound
and the phone will
return to standby.
If you return the
1)Press and hold mem until “Memory Store” is displayed.
Memory Store
2)Press
or , or enter a number (0 - 9) to select the
1
2
memory location where you would like to store the number.
3)Press select. The following screen appears and a cursor
flashes indicating that the display is ready for the name
to be entered.
Store Name
handset to the base,
the phone will return
to standby also.
If this screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
“Go Back” to choose another location.
Edit Memory 1
Delete Memory 1
Go Back
4)To enter a name (up to 14 characters), use number keys.
• See the “Steps for Entering Names and Special Characters”.
(See pages 24-25)
/
• Use #/
and / tone
to move the cursor to the desired location.
*
• Use delete/ch to delete characters as needed.
• Press and hold delete/ch to delete all the characters.
• If a name is not required, go to step 5.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 22 ] MEMORY DIALING
5)Press select. “Store Number” is displayed.
The cursor flashes indicating that the display is ready for
the number to be entered.
Store Number
6)Use the number keys to enter the phone number.
The phone number cannot exceed 20 digits.
• Use redial/p to enter a pause in the dialing sequence.
The display shows a “P”. Each pause counts as one
digit and represents a two second delay of time
between the digits as they are sent.
• The pause feature is
useful for long
distance calling,
credit card dialing,
or sequences that
require a pause
Store Number
8002971023
between digits.
• Use delete/ch to delete digits as needed.
• The pause key
counts as one digit.
Pressing redial/p
more than once
increases the length
of a pause between
numbers.
7)Press select. You will hear a confirmation tone and the
following display appears. Memory storage is complete.
For example, if you store a name and number into
memory location number 7, the display shows
“Memory 7 Stored”.
Memory 7 Stored
Memory Store
7 UNIDEN CORP
8 (Memory 8)
After about 2 seconds, “Memory Store” is displayed.
Repeat steps 2 - 7 to store more numbers.
• The 10 memory
locations are
8)Press end to return to standby mode.
represented by the
numbers 0-9 on the
keys. If you store a
number in one of
the locations, then
attempt to store a
different number in
the same location
later, the new
number will
overwrite the
previous one.
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING [ 23 ]
Steps for Entering Names and Special Characters
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order:
Upper case letters first, lower case letters next, and finally the number corresponding to
the key.
Number of times key is pressed
Keys
1
1
2
3
4
5
6
7
8
9
1
A B C a b c 2
D E F d e f 3
G H I g h i 4
J K L j k l 5
M N O m n o 6
2abc
3def
4ghi
5jkl
6mno
7pqrs
8tuv
9wxyz
0
P Q R S p q r s 7
T U V t u v 8
W X Y Z w x y z 9
* # - & ( )
(blank) 0
If you make a mistake while entering a name
/
Use / tone
or #/
to move the cursor to the incorrect character, press
*
delete/ch to erase up to the wrong entry, then enter the correct character. To
delete all characters, press and hold delete/ch.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 24 ] MEMORY DIALING
For example, to enter Uniden;
1)Pick up the handset. Press and hold mem.
2)Enter a number or press
3)Press select.
,
to select a memory location number.
4)Press 8 twice.
5)Press 6 five times.
6)Press 4 six times.
7)Press 3 four times, then press #/
to move the cursor to the right.
If the next character uses the same number key, you must press #/
to move the cursor
over. Otherwise the next time you press the number key, it changes the character that
was previously set.
8)Press 3 five times.
9)Press 6 five times.
10)When finished, press select.
To continue to store the telephone number, proceed to step 6 on page 23.
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING [ 25 ]
Making Calls with Memory Dialing
Memory dialing from St andby Mode
1)Press mem.
The handset displays your programmed memory locations.
• If you press select
before talk/flash,
you can confirm the
name and the number
stored in the selected
memory location.
1 UNIDEN CORP
2 JOHN DOE
3 MOM AND DAD
2)Press
or , or enter a number (0 - 9) to select the
memory location you would like to dial.
3)Press talk/flash. “Talk” and the volume setting appear on the display.
Then the displayed number is dialed.
• To exit the memory
function without
dialing, press end.
The handset returns
to standby.
Talk
0123456789012
Display a programmed number
/
Use #/
numbers display.
and / tone
to toggle between the names display and the
*
• Whenever you are
using a memory menu
screen, you must
press a key within 30
seconds or the phone
will return to
Program name
Program number
1 UNIDEN CORP
2 JOHN DOE
3 MOM AND DAD
1
1 8002971023
2 5452930
1 3 8175551212
standby.
When the stored phone number has 15 or more digits, “\” is
displayed next to the 13th digit. Press #/ to see the extra
digits and / tone/ to return.
5 012345678901
6 011813554329
7
*
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 26 ] MEMORY DIALING
Memory dialing from Talk Mode
1)Press talk/flash. “Talk” and
Talk
Talk
Volume High
the volume setting appears.
If you select a
Talk
0:00
2)Press mem.
memory location that
does not have a
stored number, an
error tone sounds and
the phone will not
dial.
3)Enter a number (0 - 9) to select the memory location of
the desired phone number. The selected phone number is
displayed. Then the number is dialed.
Talk 0:35
0123456789012
4)To hang up, press end.
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
and are prompted to enter the account number, simply press mem and the
location number where the special number has been stored.
Store your special number with an identifying name. (Refer to “Storing Phone
Numbers and Names” on page 22.)
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING [ 27 ]
Editing a Stored Name and/or Phone Number
1)Press and hold mem until “Memory Store” is displayed.
Memory Store
1 UNIDEN CORP
2 JOHN DOE
2)Press
or , or enter a number (0 - 9) to select the
memory location you would like to edit.
3)Press select.
The following screen appears with the memory location
number that you have selected in the display.
Edit Memory 1
Delete Memory 1
Go Back
4)Press
or
to select “Edit Memory”, then press select.
The following screen appears. The cursor flashes indicating
that the display is ready for the name to be edited. When a
name has not been stored, the cursor appears at the
beginning of the second line.
Store Name
UNIDEN CORP
/
5)Use the number keys,
/ tone
, #/ , or delete/ch to edit the name.
*
(See page 22.) To edit only the phone number, skip this step.
6)Press select. The following screen appears.
The cursor flashes indicating that the display is ready for
the number to be edited.
Store Number
8002971023
7)Use the number keys, redial/p or delete/ch to edit the phone number.
The phone number cannot exceed 20 digits. (See page 23.)
If you don’t want to change the phone number, skip this step.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 28 ] MEMORY DIALING
8)Press select. You hear a confirmation tone and the
following display appears. The memory storage is complete.
For example, if you store a name and number into
memory location number 1, the display shows
“Memory 1 Stored”. After about 2 seconds,
“Memory Store” is displayed.
Memory 1 Stored
Memory Store
1 UNIDEN CORP
2 JOHN DOE
9)Press end to return to standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING [ 29 ]
Erasing a Stored Name and Phone Number
1)Press and hold mem until “Memory Store” is displayed.
Memory Store
1 UNIDEN CORP
2 JOHN DOE
2)Press
or , or enter a number (0 - 9) to select the
memory location you would like to erase.
3)Press select.
Edit Memory 2
Delete Memory 2
Go Back
The following screen appears with the memory location
number that you have selected in the display.
4)Press
to move the pointer down to “Delete Memory”.
Edit Memory 2
Delete Memory 2
Go Back
5)Press select. The following confirmation screen appears.
6)Press to move the pointer to “Yes”.
Delete Memory 2?
Yes
No
7)Press select or delete/ch.
You hear a confirmation tone and the following
screen appears.
Memory 2 Deleted
8)After about 2 seconds the display returns to the
“Memory Store” screen. You may delete the information
in another memory location (return to step 2) or press end
to return to standby mode.
Memory Store
2
3 MOM AND DAD
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 30 ] MEMORY DIALING
RocketDial
You can store your most frequently dialed number in the
RocketDial location. The RocketDial allows you to dial a number
with one key press. (There is no need to press talk/flash. The
phone will automatically dial the number stored.)
• Memory location for
the RocketDial is
independent from
the memory location
for Memory dialing.
Storing and Editing the RocketDial
Store Number
1)When the phone is in the standby mode, press and hold
• If the RocketDial
does not have a
RocketDial. Following display appears.
stored number, the
handset will beep
rapidly and the
Edit Number
Delete Number
Go Back
If this screen appears, there is a number already stored.
Press
or
to select “Edit Number”, then
phone will not dial.
press select.
Store Number
800
2)Store the number by following step 6 under "Storing Phone
Numbers and Names" on page 23.
3)Press select.
You hear a confirmation tone and displays the following
screen. Memory storage is complete.
Number Stored
Making calls with the RocketDial
When the phone is in the standby mode, simply press RocketDial. The number
stored in the RocketDial memory location is instantly dialed.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 31 ]
ROCKETDIAL
Deleting the RocketDial
1)When the phone is in the standby mode, press and hold
RocketDial. Following display appears.
Edit Number
Delete Number
Go Back
2)Press
3) Press select. Following display appears.
4)Press to move the pointer to “Yes”.
or
to select “Delete Number”.
Delete Number?
Yes
No
5)Press select or delete/ch.
You hear a confirmation tone and the following display
appears. The handset returns to standby mode.
Number Deleted
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 32 ] ROCKETDIALING
Caller ID
You must subscribe t o Caller ID service t o use t his feat ure.
When the telephone rings, the Caller ID feature allows you to view the caller’s
name and phone number on the display before you answer the phone.
The handset displays the phone number of the incoming call, the name, and time.
Additionally, you can dial the displayed number and store the information for
memory dialing. Make sure you have turned on the Caller ID/ Call Waiting feature.
(See page 15.)
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the
Caller ID message
will not appear.
When the Telephone Rings
• When the call is
received via a
telephone company
that does not offer
Caller ID service, the
caller’s phone
number and name do
not appear.
(This includes
1)When the Caller ID message is received, the display shows the caller’s phone
number along with the date and time. The incoming call information is
stored in the Caller ID record. If the Caller ID service includes the caller’s
name, the caller’s name appears on the display (up to 15 letters).
The date and
time received
5/11 12:30PM
UNIDEN CORP
800-297-1023
Caller's name
Caller's phone number
international calls.)
Here are some typical displays;
• When the call is via
a private branch
exchange (PBX), the
caller’s phone
When the phone number
and name data are received
When invalid data is received
number and name
may not appear.
800-297-1023
When a private name is received When a private number is received
800-297-1023
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID FEATURES [ 33 ]
When an unknown name is received
When an unknown number is received
800-297-1023
2)When you pick up the phone, the display changes to “Talk”. (AutoTalk feature
• In Caller ID
is set to on.)
operation, if no key
is pressed for more
than 30 seconds, an
error tone sounds
and the telephone
returns to the
Data errors appear as “ ”.
2
standby mode.
Viewing the Caller ID Message List
The Caller ID list stores information for up to 30 incoming calls - even
unanswered calls.
• If a call comes in via
a telephone system
that does not offer
Caller ID service, no
information is stored.
1)Press cid/menu.
• Each message can be
up to 15 characters
for the phone number
and the name.
The summary screen appears. This screen shows the number
New :01
Total:02
of new messages and total messages.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
2)Press
or
to display the latest or oldest
Caller ID message.
• The number of
calls from the same
Caller ID appears
next to the received
time. Once you read
the new message,
the number will be
cleared and
3)Press
to see the next message. Or press
to see
previous message.
4)Press end to return to standby mode.
disappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 34 ] CALLER ID FEATURES
Deleting Information from the Caller ID List
The EXAI378 series stores up to 30 messages. If the phone receives the 31st
message, the oldest one in the list is automatically deleted. Caller ID data can
also be deleted manually.
• While using the
“Delete All?” or
“Delete
Delet ing a Caller ID message
Message?” screen
if no key is pressed
for more than 30
seconds, an error
tone sounds and the
telephone returns
to standby.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
1)Press cid/menu. Display the message to be deleted from
the Caller ID list by pressing
or
.
2)Press delete/ch.
Delete Message?
Yes
No
3)Press
or
to select “Yes” or “No”.
• If you get an
incoming call or
4)Press select or delete/ch.
page, the deleting
operation is canceled
and the telephone
returns to standby so
you can answer the
call or page.
When t he point er is at “Yes”:
You hear a confirmation tone and the Caller ID message is deleted.
The next Caller ID message is then displayed.
When t he point er is at “No”:
The display returns to the Caller ID message.
Delet ing all Caller ID names/ numbers
1)Press cid/menu.
New :01
Total:02
2)Press delete/ch.
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID FEATURES [ 35 ]
Delete All?
Yes
No
3)Press
or
to select “Yes” or “No”.
4)Press select or delete/ch.
When t he point er is at “Yes”:
You hear a confirmation tone and all stored Caller ID
messages are deleted.
Total:00
When t he point er is at “No”:
The display returns to the summary screen.
New :01
Total:02
Using the Caller ID List
Calling a part y from t he Caller ID list
You can place a call from the Caller ID list. The EXAI378 series stores up to 30
messages.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
1)Press cid/menu. Select the phone number that you want to
dial by pressing or
.
Talk
8002971023
• You cannot make a
call from the Caller ID
list if your EXAI378
series is connected to
a private branch
2)Press talk/flash. The displayed phone number dials
automatically.
Long Dist ance calls and Area Code Set t ing/ Cancellat ion
exchange (PBX).
While the incoming Caller ID information is displayed (in step 1), pressing 1 will
place or remove the prefix “1” in the display to set up for a long distance call or
cancel. Pressing 3 will set or cancel an area code setting.
• When a long distance
call has been set,
“1” appears in
Dial edit
the display.
You can temporarily edit the Caller ID number that is displayed by pressing select.
A cursor appears in the display. Press delete/ch to move the cursor left, make your
changes, and then press talk/flash. This will not change the number in the
Caller ID list memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 36 ] CALLER ID FEATURES
St oring Caller ID messages in Memory dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number of
the party on the Caller ID list can be stored in memory.
You can not store a
Caller ID message if no
phone number appears
in the message.
1)Press cid/menu.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
Select the phone number to be stored from the Caller ID
list by pressing
or
.
Select Location
1
2 JOHN DOE
2)Press mem.
3)Press
and
or enter a number (0 - 9) to select the
memory location to be stored.
4)Press select.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
You hear a confirmation tone and the number is stored in
memory.
The display returns to the Caller ID list.
If a message has already been stored in the selected memory
Replace Memory?
Yes
No
number location, a confirmation screen is displayed. Press
select “Yes”. Press select to overwrite. The display returns to
the Caller ID list.
to
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID FEATURES [ 37 ]
The Integrated Answering Device
The EXAI378 series has a built-in answering system that answers and records
incoming calls. You can also use your answering system to record a conversation,
leave a voice memo message, or to announce a special outgoing message to
callers when you're away from your phone.
Features
• Time and Day Announcement
• Remote Message Retrieval
• Toll Saver
• Digital Tapeless Recording
• 15 minutes of Recording Time
• Call Screening
• Conversation Recording
• Voice Memo
• Selectable Outgoing Messages
• Voice Prompts for Guidance
Digital Tapeless Recording allows you to quickly review, save, or delete the
messages you choose. You will never have to worry about a tape wearing out,
jamming, or resetting improperly.
The Integrated Answering System is easy and convenient to use, but please read
through all of the instructions carefully.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 38 ] THE INTEGRATED ANSWERING DEVICE
Turning the Answering System On/Off
1)To turn the answering system on, press answer on/off.
The current greeting message will be played and you will
hear a confirmation tone. The message counter displays the
number of messages stored in memory. If the display
flashes, then there are new messages waiting for you.
status
2)To turn the answering system off, press answer on/off
again. After the announcement “Answer off” the message
counter display will no longer be illuminated.
Setting up Your Answering System
Using the Menu Mode
The Menu mode allows you to set the following Answering System functions.
• For your
convenience, voice
prompts will guide
you through the
menu mode.
• To scroll through the menu options, repeatedly press menu.
menu
The system returns to standby after the last menu option.
You hear a confirmation tone to indicate standby mode.
• If any of the following occurs during menu setup, the
handset returns to standby. Start over with the menu
function prior to the interruption.
"Time"
menu
"Security Code"
menu
• After the setting,
press play/stop to
exit the menu mode,
or menu to move to
the next menu
"Ring Time"
menu
-Press talk/flash
"Record Time"
menu
-Press play/stop
-30 seconds lapse of time
option. Or the
"Message alert."
menu
system automatically
returns to standby in
30 seconds after the
setting.
-Receive a call
• The idle time default setting is 30 seconds. If the base
remains idle for 30 seconds, an error tone sounds and the
system returns to standby.
Return to standby
with tone sounds.
• You can use volume
/
to adjust the announcement
volume level during a voice prompt/ guidance.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INTEGRATED ANSWERING DEVICE [ 39 ]
Setting the Time
The clock on the EXAI378 series answering system starts when power is supplied
to the base. Follow these steps to set the clock to the correct time.
1)Press menu.
The system announces “Time” and the current time. The
message counter displays the current numbers ([
through [ ]) indicating the day of the week.
]
status
2)Press skip/ff or repeat/rew until the correct day is
announced. The numbers [ ] through [ ] are
displayed on the base.
• Normally the idle
time for the menu
mode is 30 seconds
before the system
returns to standby.
However for setting
the time, the idle
time is extended to
two minutes.
3)Press set/ringer to select the day.
4)Press skip/ff or repeat/rew until you hear the correct
hour setting. The numbers [ ] through [ ] are
displayed on the base as each hour is announced.
5)Press set/ringer to select the hour.
6)Press skip/ff or repeat/rew until you hear the correct
• Press and hold
skip/ff or
minute setting. The numbers [
] through [
] are
repeat/rew to
displayed on the base as each minute is announced.
quickly scroll
through the numbers
on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 40 ] THE INTEGRATED ANSWERING DEVICE
7)Press set/ringer to select the minute.
8)Press skip/ff or repeat/rew until you hear the correct AM or PM setting.
The message counter displays [ ] or [ ].
9)Press set/ringer to select the AM/ PM setting.
You hear a confirmation tone, then the announcement “Time” and the time and
day are announced for your review. The base LED displays the number that
corresponds with the day of the week.
Setting a Personal Security Code ( PIN)
To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code (00-99). To select a PIN, perform the
following steps:
The PIN code is set to
"80" when you purchase
the EXAI378 series.
1)Press menu twice.
“Security code” and the current PIN code is announced as
it is displayed on the base.
status
2)Press skip/ff or repeat/rew until the desired number
appears.
3)Press set/ringer to select the PIN code. You hear a
confirmation tone, then the announcement “Security
code” and the new PIN code is announced.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INTEGRATED ANSWERING DEVICE [ 41 ]
Setting the ring time
The ring time setting allows you to set the number of rings the caller hears
before your answering system plays the outgoing message. You can set the ring
time to answer after two, four, or six rings. Setting
(Toll Saver), the
answering system picks up after two rings if you have new messages, and after
four rings if there are none. This way, if you make a long distance call to check
your messages, you can hang up after the second ring to avoid billing charges.
1)Press menu three times.
You hear “Ring time” and the current ring time ([ ] 2,
[
] 4, [ ] 6, [
] Toll saver), and it is displayed on
status
the base.
2)Press repeat/rew or skip/ff until the desired ring
time appears.
3)Press set/ringer to select the new ring time. You hear
a confirmation tone, then the announcement “Ring
time” and the new ring time is announced.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 42 ] THE INTEGRATED ANSWERING DEVICE
Selecting the message record time
You have three record time options. The options "1 minute" or "4 minutes" set
the duration for recording the incoming messages. "Announce only" answers the
call with the preset greeting or your personal greeting but prevents the caller
from leaving a message.
1)Press menu four times.
You hear “Record time” and the current recording time
([ ] 1 minute, [ ] 4 minutes, [ ] Announce only),
and it is displayed on the base.
When using the
Announce only feature,
you may want to
change your outgoing
message, if the
message prompts the
caller to leave a
status
2)Press repeat/rew or skip/ff until the desired time
appears.
message. The
prerecorded message
changes automatically.
3)Press set/ringer to select the new recording time. You
hear a confirmation tone, then the announcement
“Record time” and new recording time is announced.
MAnnounce only feat ure
The announce only feature plays a prerecorded outgoing message “Hello, no one is
available to take your call. Please call again.”, but it will not allow the caller to
leave a message. To set “Announce only”, follow the steps above.
To scroll between the prerecorded message or your own personal greeting, press
greeting when the outgoing message is played. If you want to use your own
greeting, you may want to change your greeting to omit the prompt “to leave a
message”. Refer to "Recording a personal outgoing message" (Greeting) on page 45.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INTEGRATED ANSWERING DEVICE [ 43 ]
Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short
beeping tone. If you set the Message Alert to On and when a new message is
received, the alert tone will sound every 15 seconds.
Setting the Message Alert tone to On or Off by using
menu key.
status
1)Press menu five times.
You hear the announcement “Message Alert” and the
current setting ([
] Off or [
] On), and it is
displayed on the base.
2)Press repeat/rew or skip/ff to select.
3)Press set/ringer to select the new setting. You hear a
confirmation tone, then the announcement “Message
Alert” and the current setting you have selected is
announced. When the first new message is received, the
beeping tone will begin to sound.
Turning the Message Alert tone Off by pressing any key.
1)To quickly turn Message Alert tone off, press any key on the base unit and
the tone will aut omat ically deact ivat e. To reset, go back into the menu setup
mode (steps 1 - 3 above.)
Turning Message Alert tone Off when you’re away from your phone.
1)When all new messages are played back using the remote playback feature
(see page 51) the Message Alert tone will automatically deactivate. The tone
will not deactivate until all messages are played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 44 ] THE INTEGRATED ANSWERING DEVICE
Setting Your Outgoing Message ( Greeting)
When you receive a call, the answering system automatically plays either a preset
message or your own greeting.
MPreset message
The following message is prerecorded:
"Hello, no one is available to take your call. Please leave a message after the tone."
• You can record a
greeting up to 30
seconds long.
See "Selecting the message record time", page 43 how to set the announce only feature.
MRecording a personal out going message ( Greet ing)
1)Press and hold greeting.
• Position yourself as
near to the base as
possible and speak
clearly when
recording your
outgoing message.
You hear the announcement “Record greeting” and a confirmation tone.
[
] flashes on the message counter.
2)Start recording your message. You have 30 seconds, and the message counter
starts to count down [ ] to [ ] every second.
3)When you are finished recording your greeting, press greeting or play/stop.
You hear a confirmation tone, and then your greeting plays back for you.
MChoosing bet ween t he t wo out going messages
Press greeting. Then press greeting again when the outgoing message is
played. This switches between the prerecorded greeting or the personal
greeting. After finishing playing back the message, a confirmation tone
is heard.
To delete the personal Greeting, press delete during the announcement and the system
announces “Greeting has been deleted”.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INTEGRATED ANSWERING DEVICE [ 45 ]
Setting the base ringer volume
You have three ringer options. One allows you to turn the ringer off. The other
two are volume levels.
1)Press set/ringer.
You hear the ringer at the current volume level ([
]
When you have set the
base ringer to off and
the handset is on the
base, you will still hear
the ringer from the
handset.
High, [
] Low, [
] off) (if you set the base ringer
status
volume to off, “off” is announced) and it is displayed
on the base.
2)Press set/ringer until the desired ringer option
appears.
3)The system displayed new ringer volume.
Adjusting the speaker volume level
You can adjust the volume of the base speaker by
pressing the volume keys on the base. Press for louder
or for softer during the base speaker is being used.
status
The numbers 0-9 are displayed on the base indicating the
volume levels. 0 being the softest and 9 being the
loudest.
When you press
at 9 or
at 0, an error tone sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 46 ] THE INTEGRATED ANSWERING DEVICE
Using Your Answering System
The message counter displays the number of messages stored in memory. If the
display flashes, then there are new messages are waiting for you. The flashing
number represents the number of new messages, not total messages. The EXAI378
series is designed to play your new messages first. After you play all your new
messages, you can then play your old messages.
When the answering system is full,
is displayed on the base, and the system announces
"No remaining time". You should delete some messages so that the system can record new
messages.(Refer to "Deleting a message" on page 49.)
Playing your messages
1)Press play/stop.
The system announces the number of new and old
messages. The LED displays the number of new
messages, and the number flashes. The day and time
that each message was received is announced after the
message is played. The message counter displays the
number of current messages stored.
status
To stop playing your
messages, press
play/stop again at
any time.
When all new messages have been played, you hear a
confirmation tone and an announcement “End of
messages”. The system returns to standby.
2)After you have reviewed your new messages, you can
play your old messages by again pressing play/stop.
Once you have listened to a new message, it becomes
an old message. The old messages will be played in the
order in which they were received.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INTEGRATED ANSWERING DEVICE [ 47 ]
Repeating a message
1)Press play/stop to review your messages. The number of
stored messages are announced.
status
2)After a message has played for a few seconds, press
repeat/rew to replay the message. If you have several
messages, press repeat/rew repeatedly until you return to
the message you want to replay.
3)Press play/stop at any time to stop reviewing messages
and return to standby. The message counter shows the
number of messages stored in memory.
To quickly scroll backwards through a message, press and hold repeat/rew.
Skipping a message
1)Press play/stop to review your messages. The number of
messages is announced.
2)Press skip/ff at anytime to skip to the next message.
status
Each time skip/ff is pressed, the system scans forward one
message. If you have several messages, press skip/ff to
find the message you want to play.
3)Press play/stop at any time to stop reviewing your
messages and return to standby. The message counter
shows the number of messages stored in memory.
To quickly scroll forward through a message, press and hold skip/ff.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 48 ] THE INTEGRATED ANSWERING DEVICE
Deleting a message
To maintain maximum record time, delete the old messages.
1)Press play/stop to review your messages.
status
2)Press delete anytime during the message to delete.
3)You hear a confirmation tone and the message is deleted.
When you press delete,
you are permanently
deleting the message.
Once deleted, the
message cannot be
replayed.
You can also delete all the messages.
1)Press delete.
You hear a announcement “To delete all messages,
press delete again”.
2)Press delete again.
You hear a confirmation tone and all the messages
are deleted.
When you try to delete all messages without first listening to your new messages,
you hear several short beeps followed by an announcement “Please playback all
messages”. This protects you from accidentally erasing messages you have not
yet reviewed.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INTEGRATED ANSWERING DEVICE [ 49 ]
Voice memo
The voice memo function allows the user to record messages
(up to 10 minutes).
status
1)Press and hold memo.
You hear an announcement “Record memo message” and a
confirmation tone. [ ] flashes on the message counter.
• The voice memo
function is
completely
independent of the
greeting message.
2)Start your recording.
3)When you have finished, press play/stop or memo to
stop recording. You hear a confirmation tone and the
system returns to standby.
• The voice memo
messages are recorded
as incoming
messages.
Recording a conversation
You can record up to 10 minutes of conversation while
you are using your phone.
• A recorded
conversation is
treated as a typical
message and will be
added to the stored
messages.
status
1)During a conversation from the handset, press and
hold memo. The unit begins recording and [ ] flashes
on the message counter.
• When recording a
conversation, all
handset keys, except
talk/flash, delete/ch,
volume
A beep t hat can be heard by bot h part ies, sounds
during recording.
If you receive a call waiting tone while recording a
conversation, press flash to accept the waiting call. The
recording feature continues recording the new call. The
original call is put on hold.
/
and
end are disabled.
Stop recording if you
need to enable any
other handset keys.
2)To stop recording, press play/stop or memo.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 50 ] THE INTEGRATED ANSWERING DEVICE
Remote access away from home
You can operate your answering system from a remote location using any touch-
tone telephone. Use this function to check for recorded messages, to play or delete
messages, even to record a new greeting message.
1)Call your telephone number.
For your convenience
remote operation cards
are provided for you to
use while away from
home (located after the
index page).
2)During the greeting message, press # and enter your PIN code.
(See "Setting a Personal Security Code", page 41).
3)The answering system announces the current time and the number of messages
stored in memory. Then you hear "To play incoming messages, press pound two.
For help, press pound zero".
4)You may continue to listen to the Help Guidance, or you may select a command
from the following chart:
Command
# then 1
# then 2
# then 3
# then 4
# then 5
# then 6
# then 7
# then 8
# then 9
# then 0
Function
Repeat a Message
You must enter a
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
command within 15
seconds of entering
command waiting mode
or the answering system
automatically hangs up
and returns to standby.
Answering System On
Memo Record/ Stop*
Greeting Message Record/ Stop*
Answer System Off
Help Guidance
Download from Www.Somanuals.com. All Manuals Search And Download.
THE INTEGRATED ANSWERING DEVICE [ 51 ]
* For Memo Record and Greeting Message Record function, the first time you enter
the corresponding command, it starts the Recording function. If you want to
stop the recording, enter the command again.
5)After all of the Help Guidance prompts have played, you hear intermittent
beeps indicating that the system is in the command waiting mode. You may
enter another command at this time from the chart.
6)When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it on
remotely from any touch-tone telephone.
1)Call your telephone number.
2)Wait ten rings until the system answers. You hear a beep.
3)Press # and then enter your PIN code. The answering system announces the
number of messages stored in memory. You hear "To play incoming messages,
press pound two. For help, press pound zero".
4)Press # then 6 to turn the answering system On. You hear the outgoing
message and a confirmation tone.
5)Hang up the phone and subsequent calls will be answered by the system.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 52 ] THE INTEGRATED ANSWERING DEVICE
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset
and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set.
(See "About the digital security code", page 7.) In the rare situation that you
suspect another cordless telephone is using the same security code, you can change
the code.
If the handset battery
pack is completely
discharged or the
battery pack is removed,
the digital security code
will be lost. If this
happens, a new security
code is set automatically
next time the battery
pack is charged.
1)Remove the handset from the base unit. Press and hold find hs on the base.
2)While the handset is emitting the paging sound, place the handset on the base
unit holding find hs. The paging sound stops. Leave the handset on the base
for more than 3 seconds. A new random security code is set.
Installing the Beltclip
To at t ach t he belt clip
To remove t he belt clip
Insert the beltclip into the holes on
each side of the handset. Press down
until it clicks.
Pull both sides of the beltclip to
release the tabs from the holes.
Headset Installation
Your phone may be used with an optional headset, the Uniden
HS910. To use this feature, insert headset plug into the headset
jack. Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts Department
or visiting the web site. See Page 8.)
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION [ 53 ]
Note on Power Sources
Bat t ery replacement and handling
When the operating time becomes short, even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year.
Please contact your place of purchase or the Uniden Parts Department for a replacement battery.
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use
the Uniden battery model and Uniden adapter model specifically designated for this product.
Caut ion
Power Failure
• Use only the specified Uniden battery pack (BT-905).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
During the period that the power is off,
you will not be able to make or receive
calls with the telephone.
Maintenance
When slight ly dirt y
Wipe with a soft, dry cloth.
Caut ion
Do not use paint thinner,
benzene, alcohol, or
other chemical products.
Doing so may discolor the
surface of the telephone
and damage the finish.
When very dirt y
Wipe with a soft cloth that has been dampened with diluted, neutral detergent.
Dry with a dry cloth.
When t he charging t erminals become dirt y
Wipe with a dry cloth or a pencil eraser, if necessary.
(See page 11 for the location of charging terminals.)
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 54 ] ADDITIONAL INFORMATION
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Sympt om
Suggest ion
The status LED won't
illuminate when the handset
is placed in the base.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset and base are clean.
• Make sure that the base antenna is in a vertical position.
The audio sounds weak
and/ or scratchy.
• Move the handset and/ or base to a different location away from metal
objects or appliances and try again.
• Press delete/ch in the Talk mode to help eliminate background noise.
• Make sure that the handset is not too far from the base.
• Check both ends of the telephone line cord.
Can't make or receive calls.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (See page 53).
• Make sure that the handset is not too far from the base.
The Caller ID does not
display.
• The handset was picked up before the second ring.
• The call was placed through a switch board.
• Call your local telephone company to verify your Caller ID service
is current.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION [ 55 ]
Sympt om
Suggest ion
The handset doesn't ring or
receive a page.
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The handset may be too far from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (See page 53).
• Keep the handset away from microwave ovens, computers, remote
control toys, wireless microphones, alarm systems, intercoms, room
monitors, fluorescent lights, and electrical appliances.
Severe noise interference.
• Move to another location or turn off the source of interference.
• Make sure the base unit is plugged in.
• Make sure the answering system is turned on.
The answering system does
not work.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
The answering system does
not answer calls.
• The incoming messages may be too long. Remind callers to leave a
Messages are incomplete.
brief message.
• The memory may be full. Delete some or all of the saved messages.
• Record your personal outgoing message again. The default message
After a power failure, the
outgoing message is deleted.
should remain.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 56 ] ADDITIONAL INFORMATION
Sympt om
Suggest ion
No sound on the base unit
speaker during call monitoring
or message playback.
• Adjust the speaker volume on the base unit.
Cannot access remote call-in
features from another
touch-tone phone.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using can transmit the
tone for at least two seconds. If it cannot, you may have to use
another phone to access your messages.
If you still have a problem.
• Call our customer hotline at 1-800-297-1023.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION [ 57 ]
General Information
The phone complies with FCC Parts 15 and 68.
Operating temperature: 0° to 50°C (+32°F to +122°F)
AC Adapt er Informat ion
AC Adapter part number: AD-420
Input Voltage:
Output Voltage:
120V AC 60Hz
9V AC 350 mA
Bat t ery Informat ion
Battery part number:
Capacity:
BT-905
600 mAH, 3.6V
Battery use time (per charge)
From fully charged
Talk mode duration:
7 hours
Standby mode duration: 14 days
If the handset is left off of the base, the actual Talk mode duration will be reduced respective
to the amount of time the handset is off the base.
Recharge your phone on a regular basis by returning the handset to the base after each phone call. When
the operating time becomes short, even after the battery is recharged, please replace the battery. With
normal usage, the battery should last about one year.
A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting
the Uniden Parts Department (800) 554-3988. Hours are from 7:00 a.m. to 5:00 p.m. Central Time, Monday
through Friday. We can also be reached on the web at www.uniden.com.
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 58 ] ADDITIONAL INFORMATION
2. Do not dispose of the battery pack in a fire. The cell may explode.
Check the nickel-cadmium battery disposal package insert for
disposal instructions.
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be
toxic if swallowed.
4. Exercise care in handling the battery in order not to short the
battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with
this product only in accordance with the instructions and
limitations specified in the owner’s manual provided for this
product.
Precautions!
Important Safety Instructions
Before you read anything else, please observe the following:
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to
the unit, DO NOT expose this unit to rain or moisture.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a
dry cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bathtub,
wash bowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in installation unless
proper ventilation is provided.
7. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your dealer or local
power company.
8. Do not allow anything to rest on the power cord. Do not locate
this product where the cord will be damaged by persons walking
on it.
9. Do not overload wall outlets and extension cords, as this can
result in the risk of fire or electrical shock.
10. Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out
parts that could result in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this
product. Take it to qualified service personnel when service or
repair work is required. Opening or removing covers may expose
you to dangerous voltages or other risks. Incorrect reassembly can
cause electric shock when the appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
Rechargeable Nickel-Cadmium Battery Warning
•
•
This equipment contains a rechargeable nickel-cadmium battery.
Cadmium is a chemical known to the State of California to cause
cancer.
•
The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
Do not short-circuit the battery.
Do not charge the rechargeable nickel-cadmium battery used in
this equipment in any charger other than the one designed to
charge this battery as specified in the owner’s manual. Using
another charger may damage the battery or cause the battery to
explode.
6. Observe proper polarity orientation between the battery pack and
battery charger.
•
•
SAVE THESE INSTRUCTIONS!
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
Warning!
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
Please do not attempt to unplug any appliance during an electrical
storm.
The FCC Wants You To Know
•
Uniden voluntarily participates in an RBRC® industry program to
collect and recycle nickel-cadmium batteries at the end of their
useful life, when taken out of service within the United States.
The RBRC® program provides a convenient alternative to placing
used nickel-cadmium batteries into the trash or municipal waste
stream, which is illegal in some areas.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as
detailed by the owner’s manual, could void your authority to operate
this product. The equipment cannot be used on public coin phone
service provided by the telephone company. Connection to party line
service is subject to state tariffs. (Contact the state public utility
commission, public service commission or corporation commission for
information.)
•
Through the RBRC® program, Uniden makes it easy for you to drop
off the used battery at local retailers of replacement nickel-
cadmium batteries. You may also contact your local recycling
center for information on where to return the used battery. Please
call 1-800-8-BATTERY for information on Ni-Cd battery recycling in
your area. Uniden’s involvement in this program is part of its
commitment to protecting our environment and conserving
natural resources.
Range
Your new phone is designed to achieve the maximum possible range
by transmitting and receiving according to the highest specifications
set forth by the FCC. We have rated this phone to operate at a
maximum distance with the qualification that the range depends
upon the environment in which the telephone is used. Many factors
limit range, and it would be impossible to include all the variables in
our rating. The Maximum Range rating of this phone is meant to be
used as a means of comparison against other range claims.
•
RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the
operating instructions. (Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive repair work by a qualified technician.)
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Telephone Line Problems
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the
telephone line. Also, the telephone company may make changes in
facilities and services which may affect the operation of your unit.
However, your telephone company must give adequate notice in
writing prior to such actions to allow you time for making necessary
arrangements to continue uninterrupted service.
E. If the product has been dropped or the cabinet has been
damaged.
F. If the product exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of
the leak.
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your
problem. If you determine that it is the cause, you must leave it
disconnected until the trouble has been corrected.
Additional Battery Safety Precautions
Caution!
To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:
1. Use only the Uniden battery pack specified in the owner’s manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION [ 59 ]
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty,
(E) used in any conjunction with equipment or parts or as part of any
system not manufactured by Uniden, or (F) installed or programmed
by anyone other than as detailed by the owner’s manual for this
product.
Radio Interference
Telephone Line Outlets
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This
interference is caused by external sources such as TV, refrigerator,
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is
NOT DEFECTIVE. If these noises continue and are too distracting,
please check around your home to see what appliances may be
causing the problem. In addition, we recommend that the base not
be plugged into a circuit that also powers a major appliance because
of the potential for interference. Be certain that the antenna on the
unit is fully extended when needed.
There are two types of phone outlets:
Modular Jack
Most phone equipment available now uses modular jacks. Phone cords
are fitted with a molded plastic connector which plugs into this type
of jack. If you do not have modular phone jacks, contact your local
telephone company for information about their installation.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of
installation is not difficult; however, you should contact your Uniden
telephone dealer or a telephone supply store for advice about the
proper adapter or converter for your particular situation.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of
interference. If you cannot eliminate this type of interference, you
need to change to a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the
interference.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in effect,
warrantor will either, at its option, repair or replace the defective
unit and return it to you without charge for parts, service, or any
other cost (except shipping and handling) incurred by warrantor or
its representatives in connection with the performance of this
warranty. Warrantor, at its option, may replace the unit with a new or
refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE
SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN
LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow this exclusion or limitation of incidental or
consequential damages so the above limitation or exclusion may not
apply to you.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone
cords:
Caution!
•
•
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
•
Use caution when installing or modifying telephone lines.
Applying Power to the Base
More Than One Cordless Telephone
This phone requires an AC outlet, without a switch to interrupt
power, and the included AC adapter. To relieve strain on the DC plug
when the phone is placed on a desk or table, wrap the power cord
around the strain relief notch on the bottom of the base.
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to
select a channel that provides the clearest communication.
NOTE:
Place the power cord so that it does not create a trip
hazard, or where it could become chafed and create a fire
or other electrical hazards.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other
than your own cordless telephone unit. Consequently, any
communications using your cordless telephone may not be private.
LEGAL REMEDIES: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. This
warranty is void outside the United States of America.
Adapter Safety Features
Do not use an outlet controlled by a wall switch.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). The Product should include all parts and
accessories originally packaged with the Product. Include evidence of
original purchase and a note describing the defect that has caused
you to return it. The Product should be shipped freight prepaid, by
traceable means, to warrantor at:
Use only the Uniden AC Adapter supplied with this phone.
Installation Considerations
Selecting a Location
Before choosing a location for your new phone, there are some
important guidelines you should consider:
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty
•
The location should be close to both a phone jack and continuous
power outlet. (A continuous power outlet is an AC outlet which
does not have a switch to interrupt its power.)
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
•
Keep the base and handset away from sources of electrical noise
such as motors or fluorescent lighting.
Fort Worth, TX 76155
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from defects in
materials and craftsmanship with only the limitations or exclusions
set out below.
•
•
Be sure there is sufficient space to fully extend the base antenna.
The base can be placed on a desk or tabletop or mounted on a
standard telephone wall plate.
(800) 297-1023, 8 a.m. to 5 p.m. Central, Monday through Friday
•
You should charge your new phone for 15-20 hours before
completing the installation or using the handset.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 60 ] ADDITIONAL INFORMATION
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC, before the
registration number signifies that registration was performed based on a Declaration of Conformity
indicating that Industry Canada technical specifications were met. It does not imply that Industry
Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment
itself. The REN assigned to each terminal equipment provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device. “Privacy of communications may not be ensured when using this telephone”.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION [ 61 ]
Index
Cleaning Battery Contacts ..............11
Clock ..........................................40
Connect the base unit ....................12
Controls and Functions ....................5
Personal Security Code (PIN code) ....41
Precautions ..................................59
Quick reference guide ......................4
A
AC adapter information ..................58
Announce only feature....................43
Answering system
R
Deleting a message ....................49
Playing a message ......................47
Recording a conversation ............50
Remote access ..........................51
Repeating a message ..................48
Skipping a message ....................48
Turning on/ off ..........................39
D
Receiving a call ............................18
Recording time..............................43
Redial ........................................20
Remote access ..............................51
Repeating ....................................48
Ringer volume
Dial mode ....................................17
Digital security code ..................7,53
E, F, G, H, I, J, K, L
Earpiece volume ............................19
Flash ..........................................21
General information (Specification) ..58
Greeting ......................................45
Headset installation ......................53
I.C. Notice ..................................61
Interference ................................21
Base........................................46
Handset ..................................19
Ring time ....................................42
RocketDial....................................31
B
Base location ................................9
Battery pack
Information ..............................58
Installing ................................10
Preparing and charging ..............11
Replacement and handling ..........54
Beltclip installation ......................53
S
Setting Menu Options ....................15
Setting up the Phone ......................9
Storing phone number ....................22
M, N, O, P, Q
Maintenance ................................54
Making a call ................................18
Memory dialing
T, U
C
Editing a stored name and
phone number ........................28
Erasing a stored name and
Tone ..........................................20
Traveling out-of-range ....................20
Troubleshooting ............................55
Caller ID
Caller ID service ............................33
Call Waiting ..............................21
Deleting ..................................35
Setting Caller ID options ............15
Using ......................................36
Viewing....................................34
Call waiting..................................21
Chain dialing ................................27
Channel ......................................21
Charging the battery pack ..............11
phone number ........................30
Making calls with memory dialing..26
Storing phone numbers and names 22
Menu mode ..................................39
Message alert................................44
Outgoing message..........................45
Package contents ............................8
Page ..........................................21
V, W, X, Y, Z
Voice memo ..................................50
Volume control..............................19
Wall mounting ..............................13
Warranty ......................................60
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 62 ]
Remote Operation Card
C
U
T
C
U
T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
EXAI3 7 8 se rie s
EXAI3 7 8 se rie s
Remote access away from home
Turn on the answering system remotely
Remote access away from home
Turn on the answering system remotely
1. Call your phone number from a 1. Call your phone and let it ring
1. Call your phone number from a 1. Call your phone and let it ring
touch-tone phone.
10 times until it answers.
2. Enter your PIN code.
3. Press # then 5 to stop
the announcement.
4. Press # then 6 to turn the
answering system on.
touch-tone phone.
10 times until it answers.
2. Enter your PIN code.
3. Press # then 5 to stop
the announcement.
4. Press # then 6 to turn the
answering system on.
2. During the outgoing message,
press # and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help guidance. The
phone stands by for you to
enter a command.
2. During the outgoing message,
press # and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help guidance. The
phone stands by for you to
enter a command.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
C
U
T
C
U
T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
EXAI3 7 8 se rie s
EXAI3 7 8 se rie s
Remote access away from home
Turn on the answering system remotely
Remote access away from home
Turn on the answering system remotely
1. Call your phone number from a 1. Call your phone and let it ring
1. Call your phone number from a 1. Call your phone and let it ring
touch-tone phone.
10 times until it answers.
2. Enter your PIN code.
3. Press # then 5 to stop
the announcement.
4. Press # then 6 to turn the
answering system on.
touch-tone phone.
10 times until it answers.
2. Enter your PIN code.
3. Press # then 5 to stop
the announcement.
4. Press # then 6 to turn the
answering system on.
2. During the outgoing message,
press # and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help guidance. The
phone stands by for you to
enter a command.
2. During the outgoing message,
press # and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the help guidance. The
phone stands by for you to
enter a command.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C
U
T
C
U
T
Task
Key
Task
Key
Repeat a Message
#
1
2
3
4
5
6
7
8
9
0
Repeat a Message
#
1
2
3
4
5
6
7
8
9
0
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/ Stop
Greeting Message Record/ Stop
Answer System Off
Help Guidance
#
#
#
#
#
#
#
#
#
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/ Stop
Greeting Message Record/ Stop
Answer System Off
Help Guidance
#
#
#
#
#
#
#
#
#
C
U
T
C
U
T
Task
Key
Task
Key
Repeat a Message
#
#
#
#
#
#
#
#
#
#
1
2
3
4
5
6
7
8
9
0
Repeat a Message
#
#
#
#
#
#
#
#
#
#
1
2
3
4
5
6
7
8
9
0
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/ Stop
Greeting Message Record/ Stop
Answer System Off
Help Guidance
Playing Incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/ Stop
Greeting Message Record/ Stop
Answer System Off
Help Guidance
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we’ll t ake care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 8:00 AM to 5:00 PM CST.
Download from Www.Somanuals.com. All Manuals Search And Download.
B
Download from Www.Somanuals.com. All Manuals Search And Download.
|