DS71
Digital Spread Spectrum
provides the longest range,
the clearest sound
and the best privacy.
OWNER’S
MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3
Important Electrical Considerations . . . . . . . . . . . . . . . . . . 4
Introduction
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Included In Your Package . . . . . . . . . . . . . . . . . . . . . . . . 7
Introduction
Installing and Adjusting your Phone
Installation Considerations . . . . . . . . . . . . . . . . . . . . . . . . 8
Desk/Tabletop Installation . . . . . . . . . . . . . . . . . . . . . . . . 9
Wall Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installing the Handset Battery Pack . . . . . . . . . . . . . . . . 14
Charging the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning the Battery Contacts . . . . . . . . . . . . . . . . . . . . . 16
Adjusting the Volume Controls . . . . . . . . . . . . . . . . . . . . 17
Adjusting the Ringer Tone . . . . . . . . . . . . . . . . . . . . . . . 17
Installing the Beltclip . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Headset Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Automatic Digital Code Security . . . . . . . . . . . . . . . . . . . 19
Installing and
Adjusting
Using Your New Phone
Making and Receiving Calls . . . . . . . . . . . . . . . . . . . . . . 20
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Storing a Phone Number in Memory . . . . . . . . . . . . . . . . 22
Dialing a Number In Memory . . . . . . . . . . . . . . . . . . . . . 22
Erasing a Stored Number from Memory . . . . . . . . . . . . . . 22
Chain Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Travelling Out-Of-Range . . . . . . . . . . . . . . . . . . . . . . . . 23
PABX Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using Your
New Phone
Troubleshooting
Troubleshooting
Specifications
Quick Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Controls And Functions . . . . . . . . . . . . . . . . . . . . . . . . .28
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTION
Before you read anything else, please observe the following:
Warning!
UNIDEN DOES NOT represent this unit to be waterproof.
To reduce risk of fire, electrical shock or damage to the unit, DO NOT expose
this unit to rain or moisture.
Rechargeable Nickel-Metal Hydride Battery Warning
•
•
This equipment contains a rechargeable Ni-MH battery.
The rechargeable Ni-MH battery contained in this
equipment may explode if disposed of in fire.
•
•
Do not short-circuit the battery.
Do not charge the rechargeable Ni-MH battery used in this equipment in
any charger other than the one designed to charge
this battery as specified in this the owner’s manual. Using another
charger may damage the battery or cause the battery to explode.
The exclamation point within an equilateral triangle is
intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, these basic safety precautions
should always be followed to reduced the risk of fire, electrical shock,
and injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning, and use a dry
cloth, without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bathtub, washbowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
5. Do not place this product on an unstable cart, stand or table. The telephone
may fall, causing serious damage to the unit.
6. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
7. Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be damaged by persons walking on it.
8. Do not overload wall outlets and extension cords, as this can result in the
risk of fire or electrical shock.
9. Never push objects of any kind into this product through cabinet slots, as
they may touch dangerous voltage points or short out parts that could result
in a risk of fire or electric shock. These slots and openings are provided for
ventilation. Never spill liquid of any kind on the product.
10. To reduce the risk of electric shock, do not disassemble this product. Take it
to qualified service personnel when service or repair work is required.
Opening or removing covers may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric shock when the appliance is
subsequently used.
11. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. If the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the operating
instructions. (Adjust only those controls that are covered by the operating
3
Download from Www.Somanuals.com. All Manuals Search And Download.
instructions. Improper adjustment of other controls may result in damage,
and will often require extensive repair work by a qualified technician).
E. If the product has been dropped, or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
12. Do not use the telephone to report a gas leak in the vicinity of the leak.
Additional Battery Safety Precautions
Caution! To reduce the risk of fire or injury to persons by the battery, read and
follow these instructions.
1. Use only the appropriate type and size battery pack specified in the owner’s
manual.
2. Do not dispose of the battery pack in a fire. The cell may explode.
3. Do not open or mutilate the battery pack. Release electrolyte is corrosive
and may cause damage to the eyes or skin. It may be toxic if swallowed.
4. Exercise care in handling the battery in order not to short the battery with
conducting materials such as rings, bracelets and keys.
5. Charge the battery pack provided with or identified for use with this product
only in accordance with the instructions and limitations.
6. Observe proper polarity orientation between the battery pack and battery
charger.
IMPORTANT ELECTRICAL CONSIDERATIONS
Unplug all electrical appliances when you know an electrical storm is
approaching. Lighting can pass through your household wiring and damage
any device connected to it. This phone is no exception.
Please do not attempt to unplug any
appliance during an electrical storm.
Range
Your new phone is designed to achieve the maximum possible range by
transmitting and receiving according to the highest specifications. We have rated
this phone to operate at a maximum distance with the qualification that the
range depends upon the environment in which the telephone is used. Many
4
Download from Www.Somanuals.com. All Manuals Search And Download.
factors limit range, and it would be impossible to include all the variables in our
rating. The Maximum Range rating of this phone is meant to be used as a
means of comparison against other range claims.
Telephone Line Problems
If you are having trouble with your telephone service, you must first disconnect
your phone to determine if it is the cause of your problem. If you determine that it
is the cause, you must leave it disconnected until the trouble has been corrected.
Under power failure, this telephone may not operate. Please
ensure that a separate phone, not dependent on local power
is available during emergencies.
Radio Interference
Radio interference may occasionally cause buzzing and humming in your
cordless handset, or clicking noises in the base. This interference is caused by
external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting or
electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are
too distracting, please check around your home to see what appliances may be
causing the problem. In addition, we recommend that the base not be plugged
into a circuit that also powers a major appliance because of the potential for
interference. Be certain that the antenna on the unit is raised vertically.
Finally, it should be noted that some cordless telephones operate at frequencies
that may cause interference to nearby TV’s or VCR’s. To minimise or prevent
such interference, the base of the cordless telephone should not be placed near
or on top of a TV or VCR. If interference is experienced, moving the cordless
telephone farther away from the TV or VCR will often reduce or eliminate the
interference.
More Than One Phone
Each telephone device that you connect draws power from the phone line. We refer
to the power drawn as the device’s Ringer Equivalence Number (REN). The REN is
shown at the bottom part of your telephone. If you are using more than one
phone or other device on the line, add up all the RENs. If the total is more than 3,
your phones might not ring.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Congratulations on your purchase of the Uniden DS71 cordless telephone. This
phone is designed for reliability, long life, and outstanding performance utilising
the latest in 900 MHz Digital Spread Spectrum Technology.
FEATURES
G
G
G
G
15 channels (Aust), 7 channels (NZ)
900 MHz Digital Spread Spectrum Technology
20 Enhanced Memory Dial s (16 digits maximum per memory)
32 Digit Redial
G
G
G
G
G
G
G
G
Redial, Flash, Pause and Mute
Tone Dialing
Call Waiting Compatible
Page
14-Day Standby Battery Time
4-Hour Talk Time
Handset Earpiece and Ringer Volume Control
Hearing Aid Compatible
Auto talk
G
G
G
Auto Standby
Any key Answer
Digital Spread Spectrum Technology utilises a digital transmission
and a “wider frequency band” compared to. a “single narrow band” 30/39 Standard
Analogue transmission. The result is a more secure conversation with the clarity of
digital sound, extended range, and minimal interference from other cordless phones.
TM
Random Code digital security automatically selects one of over 16 million
codes for the handset and base. This feature prevents unauthorised calls as a result
of your phone being activated by other equipment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INCLUDED IN YOUR PACKAGE
ta
lk
b
a
tt
lo
w
ta
lk
c
.w
a
it
re
d
ia
l/
1
2
p
a
b
c
3
d
e
4
g
h
f
i
5
j
k
l
7
p
q
6
m
n
rs
o
8
t
u
v
9
w
x
y
z
*
fl
0
#
a
s
h
m
e
m
m
u
te
v
o
l
To get the most from your
phone, please read this
owner’s manual thoroughly.
Be sure to complete and mail
the product registration form.
Handset
Base
AAD 900S
AC Adaptor
Rechargeable Battery
If any of these items are
missing or damaged, contact
your place of purchase.
Long Telephone
Cord/Plug
Wall Mount Adaptor
2 x Memory Stickers
Wall Mounting Screws
G
G
G
This Owner’s Manual
Registration Card
and other printed materials
Belt Clip
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION CONSIDERATIONS
GG Selecting a Location
Before choosing a location for your new phone, here are some important
guidelines you should consider:
G
G
The location should be close to both
a phone jack and a power outlet.
Keep the base and handset away from
sources of electrical noise such as
motors and fluorescent lighting.
G
G
G
G
Be sure there is sufficient space to rotate
the base antenna fully vertical.
The base can be placed on a desk, tabletop or
mounted on a standard wall plate.
You should charge the battery in your handset for 15-20 hours
before connecting the phone line.
Most phone equipment available now uses modular jacks. Phone cords are
fitted with a molded plastic connector which plugs into this type of jack. If
you do not have a modular phone jack, contact your local telephone
company for information about their installation.
GG Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cord.
Caution!
G
Never install telephone wiring during a lightning storm.
G
Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected.
G
Use caution when installing or modifying telephone lines.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DESK/TABLETOP INSTALLATION
DC IN 9V
Before connecting your
phone line, fully charge the
Nickel- Metal Hydride battery
pack for 15-20 hours.
TEL LINE
Line in
From
Telephone
Jack
AC
Adaptor
1. Plug the AC adaptor cord into the 9V DC input jack on the back of the base.
2. Plug the AC adaptor into a standard 240V AC wall outlet.
3. Charge the battery (See CHARGING THE BATTERY PACK,
page 15).
4. Plug one end of the telephone cord into the TEL LINE jack on the back
of the base.
Place the power cord so
that it does not create a trip
hazard or where it could
become chafed and create a
fire or electrical hazard.
5. Plug the other end of the cord into the
telephone jack on the wall.
6. Set the base on a desk or tabletop with the
keypad facing up or down then place the
handset into the base. Raise the antenna to
a vertical position.
Use only the Uniden AC
adaptor supplied with this
phone plugged to
uninterrupted power supply.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL INSTALLATION
GG Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1. Snap the wall mount
adaptor into the bottom of the base
as shown.
Place the power cord so that
it does not create a trip
hazard or where it could
become chafed
and create a fire or electrical
hazard.
2. Plug the AC adaptor into the base.
3. Place the AC adaptor cord inside the
wall mount adaptor slots.
4. Plug the AC adaptor into a standard
240V AC wall outlet.
Use only the Uniden AC
adaptor supplied with this
phone plugged to
uninterrupted power supply.
5. Plug one end of the short telephone
cord (not supplied) into the
TEL LINE jack on the back of
the base. Plug the other end into a
standard telephone jack, through wall
mount adaptor hole.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Align the mounting slots on the
base with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.
Before you plug the other
end of the telephone cord
into the modular jack on the
wall, charge the battery (See
CHARGING THE BATTERY
PACK, page 15).
7. On the base, pull the handset retainer out
of the slot. Rotate clockwise 180°.
8. Flip the retainer from front to back.
Slide it back into the slot so that the lip
of the retainer is up (arrow on the retainer
clip must be pointing down).
The retainer holds the handset in place.
G Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to
the wall. Before doing this, consider the following:
G
Select a location away from electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting the screws into the
wall.
G
G
Mount your phone near a working phone jack to avoid excessive
cord lengths
Make sure the wall material is capable of supporting the weight of the base and
the handset.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Insert two mounting screws (with their
appropriate anchoring device) into the wall
100mm apart. Allow about 5mm between the
wall and screw heads for mounting the phone.
Be careful not to insert the
mounting screws
into possible electrical
hazards such as cables,
wiring, or pipes.
2. Snap the desktop/wall mount
adaptor into the bottom of the base
as shown.
3. Plug the AC adaptor cord into the
9V DC input jack on the back of
the base.
4. Put the AC adaptor cord inside the wall
mount adaptor. Plug the AC adaptor into
a standard 240V AC wall outlet.
5. Plug one end of the telephone
cord into the TEL LINE jack
on the back of the base. Plug the other
end into a telephone jack.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Align the mounting slots on the
base with the mounting screws on
the wall. Push in and down until
the phone is firmly seated.
7. On the base, pull the handset retainer
out of the slot. Rotate clockwise 180°.
8. Flip the retainer from front to back.
Slide it back into the slot so that the lip
of the retainer is up (arrow on the retainer
clip must be pointing down).
The retainer holds the handset in place.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE HANDSET BATTERY PACK
1. Press battery cover release.
Slide cover off.
Use only Uniden Battery
supplied with your phone.
2. Align the plastic connector of the
Nickel Metal Hydride battery with it’s socket
and plug it in.
3. Place the battery pack inside.
Please observe how the lead is
positioned.
4. Slide the battery cover forward
until it snaps into place
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CHARGING THE BATTERY PACK
G Initial battery charging
Before connecting your the phone for the first time, fully
charge the rechargeable battery pack for 15-20 hours
without interruption.
1. Place the handset on the base
(facing up or down).
2. Make sure that charge LED lights.
If the LED doesn’t light, be sure the AC
adaptor is plugged in and the handset
makes good contact with the base
charge
charging contacts.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
G Low battery indicator
The low battery indicator shows when the
battery pack is very low and needs to be charged.
If the phone is not in use, the batt low LED
flashes every four seconds. If the phone is in use,
the batt low LED flashes every four seconds
and the handset beeps. Complete your
conversation as quickly as possible and return
the handset to the base for charging.
CLEANING THE BATTERY CONTACTS
To maintain a good charge, clean all charging contacts on the handset and base
about once a month. Use a pencil eraser or other contact cleaner. DO NOT use
liquids or solvents; you may damage your phone.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME CONTROLS
G Handset ringer volume
Press the vol G or G key on the handset
to set the handset ringer volume. There are two
ringer volume settings; high and low.
G Handset earpiece volume
There are four volume settings for the handset
earpiece; max., high, low and min. The handset
earpiece volume can be adjusted only
during a call.
To lower the volume, press vol G. To raise the
volume, press vol G.
The volume will remain on the same setting when you hang up.
ADJUSTING RINGER TONE
1. Press flash. button.
2. Press 1, 2, 3 or 4 on the keypad to select ringer tone.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE BELTCLIP
G To attach the beltclip.
Insert the beltclip into the empty slot
and press down until it clicks.
G To remove the beltclip
Pull back on the release tab and
lift the beltclip up.
talk
batt low
talk
ghi
c.wait
redial/p
abc
2
def
1
3
6
jkl
5
mno
4
pqrs
tuv
8
wxyz
7
9
0
mem
#
mute
*
flash
vol
18
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADSET INSTALLATION
Your phone may be used with an optional
headset, the Uniden HS910/HS900.
To use this feature, simply plug the headset
plug into the headset jack. Your phone is
ready for hands-free conversations.
Use only the Uniden
HS910/HS900 headset.
If you are using an optional headset, you must still use
the handset keypad for phone operations.
AUTOMATIC DIGITAL CODE SECURITY
To prevent other parties from making unauthorised calls on your phone line, a
digital code was added to the DS71. Your phone’s handset and base share this
code. This code is randomly set each time you place the handset in the base. If
the phone experiences a power failure, you must reset the digital security code by
placing the handset on the base.
Keep the headset wire away
from handset and
base antennas.
G To reset the digital security code
1. Restore power to the base.
2. Place the handset on the base.
talk (on the handset) and in use
(on the base) LEDs momentarily blinks.
charge
The digital security code is reset.
in use
page
power
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING AND RECEIVING CALLS
G Basic phone operation
Refer to the CONTROLS &
FUNCTIONS diagram at the
back of this Owner’s Manual.
Handset On Base
Handset Off Base
talk
batt low
talk
ghi
c.wait
redial/p
abc
2
def
1
3
6
jkl
5
mno
4
pqrs
tuv
8
wxyz
7
9
0
mem
#
mute
*
flash
vol
To answer
Press
talk,
Pick up handset.
a call
or any key
1. Pick up the handset.
2. Press talk.
3. Listen for the dial
tone.
1. Press talk.
2. Listen for the dial
tone.
To make
a call
3. Dial the number.
4. Dial the number.
To hang up
To redial
Press talk, or return the handset to the base (AutoStandby).
1. Pick up the handset.
2. Press talk.
3. Listen for the dial
tone.
1. Press talk.
2. Listen for
the dial
tone.
4. Press redial.
3. Press redial.
Note:
If any key is pressed before redial, the last number dialed will not redial.
When using a headset on DS71, an ACA approved headset
is required.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL WAITING
G For Australian Version
Using the c.wait feature
The c.wait procedure
toggles between the incoming
and original call (vice versa).
Please call your local telephone service provider to check the availability of this
service in your area.
1. While talking you hear the Call Waiting signal.
2. Press c.wait button.
3. The existing call is placed on hold.
c.wait
4. Talk to the second caller.
5. Press talk button to end the current call.
6. The phone will ring back indicating
flash
that the first caller is still on hold.
7. Press talk button to answer this call.
8. Press talk button to end the call.
The flash + 2 call waiting
procedure toggles between
the incoming and original
call (and visa versa).
Using the Flash Key
To access Telstra’s Call Waiting Service, you can either use the c.wait button or
the flash key.
The flash + 1 procedure
will drop the current call
connection and pick up the
incoming call on hold.
1. While talking you hear the Call Waiting signal.
2. Press flash then 2 to switch call and put the current call on hold.
3. To switch back to your original call, press flash then 1.
G For New Zealand Version
Using the c.wait or flash key
1. While talking you hear the Call Waiting beep signal.
2. Press c.wait or the flash key. This feature sends a 600ms timed
“hook-flash” on the telephone line for accessing services such as
Call Waiting etc.
In New Zealand you must
subscribe to Telecom’s Call
Waiting Service before you
can use this feature.
PAGE
To locate the handset when it is off the
base, press page on the base. The handset
beeps for about 15 seconds.
Press talk on the handset
twice to stop the beeping.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
MUTE
To use the mute feature during a
conversation, press mute. The other party will
not be able to hear you although you can hear
them. To disable the mute feature, press mute
again.
STORING A PHONE NUMBER IN MEMORY
1. Remove the handset from the base.
2. Press mem. The talk LED blinks.
3. Enter the phone number, up to 16 digits.
talk
If a pause is needed during dialing
to access long distance service, press
redial/p to insert a pause.
The pause button count
as one digit. Pressing
redial/p more than
once increases the length
of pause between numbers.
redial/p
mem
4. Press mem again.
5. Enter the memory location (01-20) on the keypad. A tone indicates that
the number is stored.
DIALING A NUMBER IN MEMORY
G Using the memory location features
1. Press talk.
2. Press mem.
3. Enter the memory location (01-20). The number automatically dials.
ERASING A STORED NUMBER FROM MEMORY
1. Remove the handset from the base unit.
2. Press mem button twice.
3. Press the memory location (01-20) to be erased.
A tone indicates that the stored number is erased from memory.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAIN DIALING
On certain occasions after dialing a number, you may be requested by the party
or service you are calling to enter a special access code, such as when
performing a banking transaction. To store this number, refer to “Storing
Memory Dial Numbers” on page 22.
For example, if your bank’s telephone number is stored in handset memory
location 3, and your account number is stored in handset memory location 4:
1. Press talk on the handset.
2. Press mem on the handset and number 3 on the handset keypad.
G
3. At the appropriate time, press mem and number 4 on the handset
G
keypad.
4. Your handset dials the number and you may proceed with your transaction.
TRAVELLING OUT-OF-RANGE
As you begin to move too far from the base, you will first hear a clicking
sound. As you travel further, the noise increases. If you travel out-of-range,
your call terminates.
Check with your PABX
supplier if you are not sure
whether your PABX network
uses Analogue or Digital
interface.
PABX CONNECTION
The DS71 telephone may work with a 2-wire Analogue PABX network. However,
with the DS71 hook-flash timing fixed at 100msec, some PABX equipment that
uses a different hook flash timing may have its special feature (i.e. placing a
call on hold or transferring a call) inaccessible.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE CHART
If your phone is not performing to your expectations, please try these simple steps
first before calling Uniden customer service.
PROBLEM
SUGGESTION
G
G
G
Make sure the AC adaptor is plugged into the base and
wall outlet.
The charge light
won’t come on
when the handset
is placed on
Make sure the handset is properly seated
in base.
Make sure the charging contacts on the handset and base
are clean.
the base.
G
G
Make sure that the base antenna is in a vertical position.
Move the handset and/or base to a different location away
from metal objects or appliances and try again.
The audio sounds
weak and/or
scratchy
G
G
G
G
Check both ends of the base telephone
line cord.
Make sure the AC adaptor is plugged into the base and
wall outlet.
Can’t make or
receive calls.
Disconnect the AC adaptor for a few minutes, then
reconnect it.
Place the handset back on the charging cradle for a few
seconds. The talk and in use LEDs blinks
momentarily indicating that the phone has been reset.
G
The Ni-MH battery pack may be weak. Charge the battery
for 15-20 hours.
G
G
Be sure the antenna is in a vertical position.
The handset may be too far away from the base. Place the
base away from appliances or metal objects.
The handset
doesn’t ring or
receive a page.
G
G
Place the handset back on the charging cradle for a few
seconds. The in use LED lights indicating that the
phone has been reset.
You may have exceeded the REN limit. See MORE THAN
ONE PHONE on page 5.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
SUGGESTION
G
G
Check the telephone line cord connectors at both ends
that they are pushed in firmly until they click.
If you had a power failure or had unplugged the base
unit, replace the handset on the base unit for two to five
second to reset the system.
No dial tone.
G
You may have exceeded the Ringer Equivalence Number
(REN) limit of how many phones can be connected to the
same line. The REN total of all devices (printed on the
label on the bottom of each unit) should not exceed three
(3). Disconnect the appropriate units to lower the REN
total.
Does not ring.
G
G
Check the Ni-MH battery pack connection inside the main
battery compartment on the handset.
No power on
handset unit
The handset rechargeable Ni-MH battery pack may need
to be charged.
G
G
G
Make sure the charging contacts on both the base unit
and the handset are in contact during charging.
The charging contacts may need to be cleaned. Refer to
page 4 or page 15.
Does not charge
Range is limited
The Ni-MH battery pack may need to be discharged first
before a full charge.
G
G
Raise or reposition the antenna on the base or handset.
Move the base unit so that it is centrally located in your
residence or office and make sure that the base unit is not
located near appliances.
G
G
The handset rechargeable Ni-MH battery pack may need
charging.
Calls received
flutters or fades
You may be out of normal operating range. Move closer to
the base unit.
G
G
G
When storing phone numbers, make sure that the handset
is in the standby position.
Cannot store or
recall phone
numbers from
memory
When recalling stored phone numbers, check first for a
dial tone.
Always use two digits when entering/recalling memory
index numbers.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL
Australian Specification: The DS71 complies with TS001, TS002, TS004, AS/NZS 3260 and
FCC Part 15(as per ACA Radio Communications Class Licensing Requirements).
New Zealand Specification: The DS71 complies with PTC200, RFS 29.
Frequency control: PLL
Modulation: Direct Sequence Spread Spectrum; DBPSK
Operating temperature: 0º to +50º C
BASE UNIT
Frequency: 917.4 to 925.8 MHz (15 channels: Australia)
Frequency: 923.4 to 927.0 MHz (7 channels: New Zealand)
Power requirements: 9V 300mA (from AC adaptor)
Size: 152mm (W) x 183mm (H) x 53.5mm (D)
Weight: Approx. 307g
HANDSET
Frequency: 917.4 to 925.8 MHz (15 channels: Australia)
Frequency: 923.4 to 927.0 MHz (7 channels: New Zealand)
Power requirements: Rechargeable NiMH battery pack
Size (without antenna): 50mm (W) x 154mm (H) x 27.5mm (D)
Weight: Approx. 136g (including battery)
Battery:
Capacity
550 mAH, 3.6V
4 hours
Talk mode
Standby mode 14days
Specifications, features, and availability of optional
accessories are all subject to change without prior notice.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
One Year Limited Warranty
Important:
Warrantor:
Evidence of original purchase is required for warranty service.
Uniden Australia Pty Limited ACN 001 865 498
Uniden New Zealand Limited
ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration
of this warranty, its DS71(herein after referred to as the Product), to be free from defects in
materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only, shall
terminate and be of no further effect 12 months after the date of original retail sale. This
warranty will be deemed invalid if the product is; (A) Damaged or not maintained as
reasonable and necessary, (B) Modified, altered or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C) Improperly installed, (D)
Repaired by someone other than an authorised Uniden Repair Agent for a defect or
malfunction covered by this warranty, (E) Used in conjunction with any equipment or
parts or as part of a system not manufactured by Uniden.
PARTS COVERED: This warranty covers for one (1) year, the Base/Charging Unit and
Handset only. All accessories (AC Adaptor, Wall mount bracket etc)are covered for 90 days only.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, the warrantor at its discretion, will
repair the defect or replace the product and return it to you without charge for parts or
service. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN
ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR RIGHTS UNDER THE
CONSUMER GUARANTEE ACT.
WARRANTY CARD: If a warranty card has been included with this product then please
fill it in and return to us within 14 days of purchase. Your name and the Serial number of
the product will then be registered in our database and this will help us process your claim
with greater speed and efficiency should you require warranty service.
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: In the event that
the product does not conform to this warranty, the Product should be shipped or delivered,
freight pre-paid, with evidence of original purchase (eg. a copy of the sales docket), to the
warrantor at:
UNIDEN AUSTRALIA PTY LIMITED
SERVICE DIVISION
345 Princes Highway,
UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION
150 Harris Road,
Rockdale NSW 2216
Ph (02) 9599 3577 Fx (02) 9599 3278
Toll Free 1300 366 895
East Tamaki, Auckland
Ph (9) 273 8383 Fx (9) 274 4253
Toll Free 0800 4 UNIDEN
4 864 336
Customers in other States should ship or deliver the Product freight pre-paid to their nearest
Uniden Authorised Repair Centre (Contact Uniden for the nearest Warranty Agent to you)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS & FUNCTIONS
22
23
1. Headset Jack
13. Hash Button
14. Mute Button
15. Mem Button
2. Battery Compartment
3. Handset Retainer
4. Talk LED
16. Volume Up/Down Button
17. Handset Microphone
18. Charge LED
5. Talk Button
6. Redial/Pause Button
7. Star Button
19. In Use LED
8. Flash Button
20. Page Button
21. Power LED
9. Handset Antenna
10. Battery Low LED
11. Call Waiting Button
12. Numeric Keypad
22. DC in 9V
23. Tel Line
28
Download from Www.Somanuals.com. All Manuals Search And Download.
9
1
4
10
11
talk
batt low
talk
c.wait
5
6
redial/p
abc
def
1
2
3
6
ghi
jkl
mno
4
5
12
pqrs
tuv
wxyz
7
8
9
13
14
0
mem
#
mute
7
8
2
*
flash
vol
15
16
17
3
18
19
charge
in use
power
page
20
21
29
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2000 Uniden Australia Pty Limited
Uniden New Zealand Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|